Api commands

This page is still under construction. All of the following are the commands we have reverse engineered. It is not an exhaustive list of all the possible commands.

Commands do not immediately make it to this page. You can find more commands [here](https://github.com/humbertogontijo/python-roborock/blob/main/roborock/roborock_typing.py#L18)

Commands can have multiple parameters that can change from one model to another.

• app_charge

• app_get_dryer_setting

• app_get_init_status

• app_pause

• app_rc_end

• app_rc_move

• app_rc_start

• app_rc_stop

• app_segment_clean

• app_set_dryer_setting

• app_start_collect_dust

• app_start_wash

• app_start

• app_stop_collect_dust

• app_stop_wash

• app_stop

• change_sound_volume

• close_dnd_timer

• del_server_timer

• dnld_install_sound

• get_clean_sequence

• get_consumable

• get_custom_mode

• get_customize_clean_mode

• get_dnd_timer

• get_dust_collection_mode

• get_clean_follow_ground_material_status

• get_identify_furniture_status

• get_identify_ground_material_status

• get_led_status

• get_map_v1

• get_multi_map

• get_multi_maps_list

• get_network_info

• get_prop

• get_room_mapping

• get_scenes_valid_tids

• get_serial_number

• get_smart_wash_params

• get_sound_progress

• get_status

• get_timezone

• get_turn_server

• get_valley_electricity_timer

• get_wash_towel_mode

• load_multi_map

• name_segment

• reset_consumable

• resume_segment_clean

• resume_zoned_clean

• retry_request

• reunion_scenes

• save_map

• send_ice_to_robot

• send_sdp_to_robot

• set_server_timer

• set_clean_motor_mode

• set_customize_clean_mode

• set_dnd_timer

• set_dust_collection_mode

• set_fds_endpoint

• set_identify_furniture_status

• set_identify_ground_material_status

• set_led_status

• set_mop_mode

• set_scenes_segments

• set_scenes_zones

• set_segment_ground_material

• set_smart_wash_params

• set_timezone

• set_valley_electricity_timer

• set_wash_towel_mode

• set_water_box_custom_mode

• start_camera_preview

• start_edit_map

• start_voice_chat

• start_wash_then_charge

• stop_camera_preview

• stop_segment_clean

• test_sound_volume

• upd_server_timer

Robot status

get_status

Description: Returns the current status of the vacuum

Parameters: None

Returns:

msg_ver:

msg_seq:

state:

battery: Battery level of your device.

clean_time: Total clean time in hours.

clean_area: Total clean area in meters.

error_code:

map_reset:

in_cleaning:

in_returning:

in_fresh_state:

lab_status:

water_box_status:

back_type:

wash_phase:

wash_ready:

fan_power:

dnd_enabled:

map_status:

is_locating:

lock_status:

water_box_mode:

water_box_carriage_status:

mop_forbidden_enable:

camera_status:

is_exploring:

home_sec_status:

home_sec_enable_password:

adbumper_status:

water_shortage_status:

dock_type:

dust_collection_status:

auto_dust_collection:

avoid_count:

mop_mode:

debug_mode:

collision_avoid_status:

switch_map_mode:

dock_error_status:

charge_status:

unsave_map_reason:

unsave_map_flag:

Vacuum Model	Supported
Roborock S7 MaxV Ultra	Yes
Roborock S8 Pro Ultra	Yes

App vacuum control

app_start

Description:

Parameters:

app_pause

Description: This pauses the vacuum’s current task

Parameters: None

Returns ok or error

Vacuum Model	Supported
Roborock S8 Pro Ultra	Yes

app_stop

Description:

Parameters:

app_start_collect_dust

Description: This empties the bin while docked

Parameters: None

Vacuum Model	Supported
Roborock S8 Pro Ultra	Yes

app_stop_collect_dust

Description: This stops the emptying of the dust bin while docked

Parameters: None

Vacuum Model	Supported
Roborock S8 Pro Ultra	Yes

app_start_wash

Description: This washes the mop while docked

Parameters: None

Vacuum Model	Supported
Roborock S8 Pro Ultra	Yes

app_stop_wash

Description: This stops washing the mop whiloe docked

Parameters: None

Vacuum Model	Supported
Roborock S8 Pro Ultra	Yes

app_goto_target

Description: Got to target

Parameters:

• X coordinate as integer (e.g.: 23450)

• Y coordinate as integer (e.g.: 16450)

Returns ok or error

Vacuum Model	Supported
Roborock S8 Pro Ultra	Yes

app_charge

Description: This tells your vacuum to go back to the dock and charge.

Parameters: None

Returns : ok or error

Vacuum Model	Supported
Roborock S7 MaxV Ultra	Yes
Roborock S8 Pro Ultra	Yes

App status

app_get_init_status

Description: Returns details on the app being used to interact with Roborock servers ?? In this case the app is backend supporting the HA integration ?

Parameters: None

Returns:

local_info:

name: Name of the app

bom: Version of the app

location: Location of the app

language: Language of the app

wifiplan: Wifi plan of the app

timezone: Timezone of the app

logserver: Log server of the app

featureset: Featureset of the app

feature_info: List of features

new_feature_info: New feature info

Return example::

{‘local_info’: {‘name’: ‘custom_A.03.0342_CE’, ‘bom’: ‘A.03.0342’, ‘location’: ‘de’, ‘language’: ‘en’, ‘wifiplan’: ‘’, ‘timezone’: ‘Europe/Berlin’, ‘logserver’: ‘awsde0.fds.api.xiaomi.com’, ‘featureset’: 3}, ‘feature_info’: [111, 112, 113, 114, 115, 116, 117, 118, 119, 120, 121, 122, 123, 124, 125], ‘new_feature_info’: 2247395306799103, ‘new_feature_info_str’: ‘00000008009EFFFE’}

Vacuum Model	Supported
Roborock S8 Pro Ultra	Yes

App dryer settings

app_get_dryer_setting

Description: Get dock dryer settings.

Parameters: None

Returns:

status:

on:

cliff_on:

cliff_off

count:

dry_time: Duration dryer remains on in seconds.

off:

cliff_on:

cliff_off:

count:

Return example:

{'status': 1, 'on': {'cliff_on': 1, 'cliff_off': 1, 'count': 10, 'dry_time': 7200}, 'off': {'cliff_on': 2, 'cliff_off': 1, 'count': 10}}

Source: Roborock S7 MaxV Ultra

Vacuum Model	Supported
Roborock S7 MaxV Ultra	Yes
Roborock S8 Pro Ultra	Yes

app_set_dryer_setting

Description: Set the time for the dryer to run

Parameters: ‘{“status”:1,”on”:{“dry_time”:14400}}’

dry_time is the time in seconds the dryer will run for

Returns ok or error

Vacuum Model	Supported
Roborock S8 Pro Ultra	Yes

App remote control

app_rc_start

Description: Starts remote control.

Parameters: None

Returns ok or error

Vacuum Model	Supported
Roborock S8 Pro Ultra	Yes

app_rc_move

Description: Moves the robot in the direction specified

Parameters: To be documented

Returns ok or error

app_rc_stop

Description: Stops the remote control

Parameters: None

Returns ok or error

app_rc_end

Description: Ends the remote control task

Parameters:

Returns ok or error

Vacuum Model	Supported
Roborock S8 Pro Ultra	Yes

App other

app_set_smart_cliff_forbidden

Description:

Parameters:

app_spot

Description:

Parameters:

app_stat

Description: This returns the current status of the vacuum

Parameters: None

Returns: ok or error

Vacuum Model	Supported
Roborock S8 Pro Ultra	Yes

app_wakeup_robot

Description:

Parameters:

app_zoned_clean

Description: Starts a zone clean

Parameters:

Returns: ok or error

Vacuum Model	Supported
Roborock S8 Pro Ultra	Yes

Segments and Zones

app_segment_clean

Description: This starts a segment clean and repeats it the number of times specified.

Parameters: An array of segments to clean. Each segment is an integer with the segment id and the number of times to clean it. For example, to clean segment 18 twice, the parameter would be

[{‘segments’: [18], ‘repeat’: 2}]

Command:

roborock -d command –device_id deviceIdRedacted –cmd app_segment_clean –params ‘[{“segments”: [17,19], “repeat”: 2}]’

Returns ok or error

Vacuum Model	Supported
Roborock S8 Pro Ultra	Yes

set_segment_ground_material

Description: Sets the groud material for the segment

Parameters: “{‘data’:[[22,3,0]]}”

Returns ok or error

name_segment

Description:

Parameters: To be determined

resume_segment_clean

Description:

Parameters:

Vacuum Model	Supported
Roborock S8 Pro Ultra	Yes

stop_segment_clean

Description:

Parameters:

Vacuum Model	Supported
Roborock S8 Pro Ultra	Yes

set_scenes_zones

Description:

Parameters:

set_scenes_segments

Description:

Parameters:

get_scenes_valid_tids

Description: To be confirmed

Parameters: None

Returns:

[{'tid': '1699679077347', 'map_flag': 0, 'segs': [{'sid': 24}, {'sid': 20}, {'sid': 22}, {'sid': 18}]}, {'tid': '1699679236553', 'map_flag': 0, 'segs': [{'sid': 24}, {'sid': 20}, {'sid': 22}]}, {'tid': '1699679386045', 'map_flag': 0, 'segs': [{'sid': 16}, {'sid': 19}, {'sid': 17}]}, {'tid': '1699679335823', 'map_flag': 0, 'segs': [{'sid': 19}, {'sid': 16}, {'sid': 17}]}]

Vacuum Model	Supported
Roborock S8 Pro Ultra	Yes

resume_zoned_clean

Description:

Parameters:

reunion_scenes

Description:

Parameters:

Camera

start_camera_preview

Description:

Parameters:

Vacuum Model	Supported
Roborock S8 Pro Ultra	No

stop_camera_preview

Description:

Parameters:

Vacuum Model	Supported
Roborock S8 Pro Ultra	No

get_camera_status

Description: Get camera status.

Parameters: None

Returns: 3457

387 Roborock S8 Pro Ultra

Source: Roborock S7 MaxV Ultra

set_camera_status

Description:

Parameters:

start_voice_chat

Description:

Parameters:

Vacuum Model	Supported
Roborock S8 Pro Ultra	No

Clean modes

get_carpet_clean_mode

Description: Get carpet clean mode.

Parameters:

Returns:

carpet_clean_mode: Enumeration for carpet clean mode.

Return example:

{'carpet_clean_mode': 3}

Source: Roborock S7 MaxV Ultra

set_carpet_clean_mode

Description:

Parameters:

get_carpet_mode

Description:

Parameters: None

Returns:

enable:

current_integral:

current_high:

current_low:

stall_time:

Return example:

{'enable': 1, 'current_integral': 450, 'current_high': 500, 'current_low': 400, 'stall_time': 10}

Vacuum Model	Supported
Roborock S7 MaxV Ultra	Yes
Roborock S8 Pro Ultra	Yes

set_carpet_mode

Description:

Parameters:

get_smart_wash_params

Description: Returns the smartwash parameters

Parameters: None

Returns:

smart_wash: 0 is off, 1 is on

wash_interval: The interval in seconds between washes

Example:

{'smart_wash': 0, 'wash_interval': 1200}

Vacuum Model	Supported
Roborock S8 Pro Ultra	Yes

set_smart_wash_params

Description: Sets the smartwash parameters

Parameters:

smart_wash: 0 is off, 1 is on

wash_interval: The interval in seconds between washes

{‘smart_wash’: 0, ‘wash_interval’: 1200}

Vacuum Model	Supported
Roborock S8 Pro Ultra	Yes

Cleaning history

get_clean_record

Description:

Parameters: To be determined

get_clean_record_map

Description:

Parameters:

get_clean_sequence

Description:

Parameters:

get_clean_summary

Description: Get a summary of cleaning history.

Parameters: None

Returns:

clean_time:

clean_area:

clean_count:

dust_collection_count:

records:

Return example:

{'clean_time': 568146, 'clean_area': 8816865000, 'clean_count': 178, 'dust_collection_count': 172, 'records': [1689740211, 1689555788, 1689259450, 1688999113, 1688852350, 1688693213, 1688692357, 1688614354, 1688613280, 1688606676, 1688325265, 1688174717, 1688149381, 1688092832, 1688001593, 1687921414, 1687890618, 1687743256, 1687655018, 1687631444]}

Source: Roborock S7 MaxV Ultra

Vacuum Model	Supported
Roborock S7 MaxV Ultra	Yes
Roborock S8 Pro Ultra	Yes

get_mop_template_params_summary

Description:

Parameters:

Vacuum Model	Supported
Roborock S8 Pro Ultra	No

Child lock

get_child_lock_status

Description: This gets the child lock status of the device. 0 is off, 1 is on.

Parameters: None

Returns:

lock_status:

Return example:

{'lock_status': 0}

Vacuum Model	Supported
Roborock S8 Pro Ultra	Yes

set_child_lock_status

Description: This sets the child lock status of the device.

Parameters: ‘{“lock_status” :0}’

Returns: ok

Vacuum Model	Supported
Roborock S8 Pro Ultra	Yes

Consumables

get_consumable

Description: This gets the status of all of the consumables for your device.

Parameters: None

Returns:

main_brush_work_time: This is the amount of time the main brush has been used in seconds since it was last replaced

side_brush_work_time: This is the amount of time the side brush has been used in seconds since it was last replaced

filter_work_time: This is the amount of time the air filter inside the vacuum has been used in seconds since it was last replaced

filter_element_work_time:

sensor_dirty_time: This is the amount of time since you have cleaned the sensors on the bottom of your vacuum.

strainer_work_times:

dust_collection_work_times:

cleaning_brush_work_times:

Return examples:

{'main_brush_work_time': 14151, 'side_brush_work_time': 41638, 'filter_work_time': 14151, 'filter_element_work_time': 0, 'sensor_dirty_time': 41522, 'strainer_work_times': 44, 'dust_collection_work_times': 19, 'cleaning_brush_work_times': 44}

reset_consumable

Description:

Parameters: List of consumables to reset. For example, to reset consumables ‘strainer_work_times’ and ‘sensor_dirty_time’ the parameter would be

[‘strainer_work_times’, ‘sensor_dirty_time’]

Vacuum Model	Supported
Roborock S7 MaxV Ultra	Yes
Roborock S8 Pro Ultra	Yes

Custom modes

get_custom_mode

Description: It returns the current custom mode.

Parameters: None

Returns:

integer value of the current custom mode

Return example:

102

Vacuum Model	Supported
Roborock S7 MaxV Ultra	Yes
Roborock S8 Pro Ultra	Yes

set_custom_mode

Description:

Parameters:

get_customize_clean_mode

Description:

Parameters:

set_customize_clean_mode

Description:

Parameters:

Furniture and ground material

get_identify_furniture_status

Description:

Parameters:

set_identify_furniture_status

Description:

Parameters:

get_identify_ground_material_status

Description:

Parameters:

set_identify_ground_material_status

Description:

Parameters:

LEDs

get_flow_led_status

Description:

Parameters:

set_flow_led_status

Description:

Parameters:

get_led_status

Description: Returns the LED status. If disabled the indicator light will turn off 1 minute after fully charged

Parameters:

Returns:

led_status: 0 is off, 1 is on

Vacuum Model	Supported
Roborock S8 Pro Ultra	Yes

set_led_status

Description: Sets the LED status. If disabled the indicator light will turn off 1 minute after fully charged

Parameters: ????

Maps

get_multi_map

Description:

Parameters:

Comment: Response timed out for S8 Pro Ultra

get_multi_maps_list

Description: Returns a list of map information stored on the device.

Parameters: None required

Returns:

max_multi_map: max_bak_map: multi_map_count: map_info:

mapFlag:
add_time:
length:
name:
bak_maps::

    mapFlag:
    add_time:

Return example:

{'max_multi_map': 4, 'max_bak_map': 1, 'multi_map_count': 2, 'map_info': [{'mapFlag': 0, 'add_time': 1699919699, 'length': 4, 'name': 'Home', 'bak_maps': [{'mapFlag': 4, 'add_time': 1699823921}]}, {'mapFlag': 1, 'add_time': 1699828035, 'length': 13, 'name': 'Boys bathroom', 'bak_maps': [{'mapFlag': 5, 'add_time': 1699828035}]}]}

Source: S8 Pro Ultra

Vacuum Model	Supported
Roborock S8 Pro Ultra	Yes

get_map_v1

Description: Returns the map

Parameters: Unknown

Comment: Returns a map in a format that is not yet understood by me

start_edit_map

Description:

Parameters:

get_room_mapping

Description: Returns a list of rooms, ids as discovered by

Parameters: None

Returns:

room_id

Return example:

[[16, '14731399', 12], [17, '2220009', 2], [18, '2219688', 12], [19, '2219685', 9], [20, '2219691', 12], [21, '2431758', 12], [22, '2219677', 13], [23, '2312548', 12], [24, '2219678', 14], [25, '2219686', 15], [26, '2219772', 12], [27, '14768755', 12]]

Vacuum Model	Supported
Roborock S7 MaxV Ultra	Yes
Roborock S8 Pro Ultra	Yes

load_multi_map

Description:

Parameters: number (the floor/map index)

save_map

Description:

Parameters:

Operating modes

get_mop_mode

Description: Get mop mode.

Parameters: None

Returns: Enumeration for mop mode. 300

Example for S8 Pro Ultra:

standard = 300
deep = 301
deep_plus = 303
fast = 304
custom = 302

Vacuum Model	Supported
Roborock S8 Pro Ultra	Yes

set_mop_mode

Description: Set mop mode.

Parameters: mop_mode 300

Vacuum Model	Supported
Roborock S8 Pro Ultra	Yes

set_clean_motor_mode

Description:

Parameters:

get_dust_collection_mode

Description:

Parameters: None

Returns:

mode:

Return example:

{'mode': 0}

Source: Roborock S7 MaxV Ultra

Vacuum Model	Supported
Roborock S7 MaxV Ultra	Yes
Roborock S8 Pro Ultra	Yes

set_dust_collection_mode

Description:

Parameters:

get_wash_towel_mode

Description:

Parameters: None

Returns:

wash_mode:

Return example:

{'wash_mode': 1}

Source: Roborock S7 MaxV Ultra

unknown = -9999

light = 0

balanced = 1

deep = 2

Vacuum Model	Supported
Roborock S7 MaxV Ultra	Yes
Roborock S8 Pro Ultra	Yes

set_wash_towel_mode

Description: Sets the wash wash_towel_mode

Parameters: {‘wash_mode’: 2}

Returns: ok or error

Source: S8 Pro Ultra

Vacuum Model	Supported
Roborock S7 MaxV Ultra	Yes
Roborock S8 Pro Ultra	Yes

get_collision_avoid_status

Description:

Parameters: None

Returns:

status:

Return example:

{'status': 1}

Vacuum Model	Supported
Roborock S7 MaxV Ultra	Yes
Roborock S8 Pro Ultra	Yes

set_collision_avoid_status

Description: Update collision avoid status.

Parameters: ‘{“status” :1}’

Returns:

ok

Vacuum Model	Supported
Roborock S7 MaxV Ultra	Yes
Roborock S8 Pro Ultra	Yes

start_wash_then_charge

Description:

Parameters:

switch_water_mark

Description:

Parameters:

Vacuum Model	Supported
Roborock S8 Pro Ultra	No

System information

get_network_info

Description: Get the device’s network information.

Parameters: None

Returns:

ssid: SSID of the wirelness network the device is connected to.

ip: IP address of the device.

mac: MAC address of the device.

bssid: BSSID of the device.

rssi: RSSI of the device.

Return example:

{'ssid': 'My WiFi Network', 'ip': '192.168.1.29', 'mac': 'a0:2b:47:3d:24:51', 'bssid': '18:3b:1a:23:41:3c', 'rssi': -32}

Source: Roborock S7 MaxV Ultra

Vacuum Model	Supported
Roborock S7 MaxV Ultra	Yes
Roborock S8 Pro Ultra	Yes

get_serial_number

Description: Get serial number of the vacuum.

Parameters: None

Returns:

serial_number: Serial number of the vacuum.

Return example:

{'serial_number': 'B16EVD12345678'}

Source: Roborock S7 MaxV Ultra

Vacuum Model	Supported
Roborock S7 MaxV Ultra	Yes
Roborock S8 Pro Ultra	Yes

get_prop

Description: Generic get property command

Parameters: The property to get

Example:

roborock -d command --device_id aHiddenDeviceId --cmd get_prop --params '["battery"]'

Comment : This example returns the same as get_status. Initial testing has shown that not all get commands are supported by this method

get_turn_server

Description:

Parameters:

Vacuum Model	Supported
Roborock S8 Pro Ultra	No

enable_log_upload

Description:

Parameters:

find_me

Description: This makes your vacuum speak so you can find it.

Parameters: None

upd_server_timer

Description:

Parameters:

get_homesec_connect_status

Description:

Parameters:

Vacuum Model	Supported
Roborock S8 Pro Ultra	No

set_fds_endpoint

Description:

Parameters:

send_ice_to_robot

Description:

Parameters:

send_sdp_to_robot

Description:

Parameters:

get_device_ice

Description:

Parameters:

Vacuum Model	Supported
Roborock S8 Pro Ultra	No

get_device_sdp

Description:

Parameters:

Vacuum Model	Supported
Roborock S8 Pro Ultra	No

retry_request

Description:

Parameters:

Timers

del_server_timer

Description:

Parameters:

dnd_timer

get_dnd_timer

Description: Gets the do not disturb timer

start_hour: The hour you want dnd to start

start_minute: The minute you want dnd to start

end_hour: The hour you want dnd to be turned off

end_minute: The minute you want dnd to be turned off

enabled: If the switch is currently turned on in the app for DnD

Parameters: None

set_dnd_timer

Description:

Parameters:

close_dnd_timer

Description: This disables the dnd timer

Parameters: None

get_server_timer

Description:

Parameters:

set_server_timer

Description:

Parameters:

get_timezone

Description: Get the device’s time zone.

Parameters: None

Returns: Time zone by the TZ identifier (e.g., America/Los_Angeles)

Vacuum Model	Supported
Roborock S7 MaxV Ultra	Yes
Roborock S8 Pro Ultra	Yes

set_timezone

Description: Sets the device’s time zone

Parameters:

Sound

get_sound_volume

Description: Returns the volume of the sound played by the vacuum

Parameters: None

Returns:

volume: The volume of the sound played by the vacuum

Example:

72

Vacuum Model	Supported
Roborock S8 Pro Ultra	Yes

change_sound_volume

Description: Sets the volume of the sound played by the vacuum

Parameters: volume

Returns: ok or error

roborock -d command –device_id aHiddenDeviceId –cmd change_sound_volume –params 72

Vacuum Model	Supported
Roborock S8 Pro Ultra	Yes

test_sound_volume

Description: Plays a sound on the vacumm to identity volume

Parameters: None

Vacuum Model	Supported
Roborock S8 Pro Ultra	Yes

get_sound_progress

Description:

Parameters:

Returns:

{'sid_in_progress': 0, 'progress': 0, 'state': 0, 'error': 0}

get_current_sound

Description:

Parameters:

Return example:

{'sid_in_use': 122, 'sid_version': 1, 'sid_in_progress': 0, 'location': 'de', 'bom': 'A.03.0342', 'language': 'en', 'msg_ver': 2}

Vacuum Model	Supported
Roborock S7 MaxV Ultra	Yes
Roborock S8 Pro Ultra	Yes

dnld_install_sound

Description:

Parameters:

Off peak charging

get_valley_electricity_timer

Description: Get valley electricity timer.

Parameters: None

Returns:

start_hour: The hour you want valley electricity to start

start_minute: The minute you want valley electricity to start

end_hour: The hour you want valley electricity to be turned off

end_minute: The minute you want valley electricity to be turned off

enabled: If the switch is currently turned on in the app for valley electricity

` {'start_hour': 0, 'start_minute': 0, 'end_hour': 0, 'end_minute': 0, 'enabled': 0} `

Vacuum Model	Supported
Roborock S8 Pro Ultra	Yes

set_valley_electricity_timer

Description: Sets the valley electricity timer

Parameters:

start_hour: The hour you want valley electricity to start

start_minute: The minute you want valley electricity to start

end_hour: The hour you want valley electricity to be turned off

end_minute: The minute you want valley electricity to be turned off

enabled: If the switch is currently turned on in the app for valley electricity

Example:

{'start_hour': 0, 'start_minute': 0, 'end_hour': 0, 'end_minute': 0, 'enabled': 0}

Vacuum Model	Supported
Roborock S8 Pro Ultra	???

Water box mode

get_water_box_custom_mode

Description: Get water box mode.

Parameters: None

Returns: Enumeration for water box mode. 203

get_clean_follow_ground_material_status

Description:

Parameters: None ====================== ========= Vacuum Model Supported ====================== ========= Roborock S8 Pro Ultra Yes ====================== =========

set_water_box_custom_mode

Description: Set the water box mode.

Parameters: {‘water_box_mode’: 203}

Returns: ok or error

Vacuum Model	Supported
Roborock S8 Pro Ultra	Yes