sbuild (Debian sbuild) 0.86.3~bpo12+1 (03 November 2024) on debusine-worker-arm64-demeter-08.freexian.com
+==============================================================================+
| libffi 3.4.6-1 (arm64) Sun, 17 Nov 2024 00:03:08 +0000 |
+==============================================================================+
Package: libffi
Version: 3.4.6-1
Source Version: 3.4.6-1
Distribution: sid
Machine Architecture: arm64
Host Architecture: arm64
Build Architecture: arm64
Build Type: binary
I: No tarballs found in /var/lib/debusine/worker/.cache/sbuild
Unpacking /var/lib/debusine/worker/system-images/957781/system.tar.xz to /tmp/tmp.sbuild.QxKWT76T4M...
I: NOTICE: Log filtering will replace 'sbuild-unshare-dummy-location' with '<<CHROOT>>'
+------------------------------------------------------------------------------+
| Chroot Setup Commands |
+------------------------------------------------------------------------------+
rm -f /etc/resolv.conf
----------------------
I: Finished running 'rm -f /etc/resolv.conf'.
Finished processing commands.
--------------------------------------------------------------------------------
Copying /tmp/debusine-fetch-exec-upload-gjk12ir6/dpkg-dbgsym_1.22.12~1.gbp82cafd_arm64.deb to /<<CHROOT>>...
Copying /tmp/debusine-fetch-exec-upload-gjk12ir6/dpkg_1.22.12~1.gbp82cafd_arm64.deb to /<<CHROOT>>...
Copying /tmp/debusine-fetch-exec-upload-gjk12ir6/dselect-dbgsym_1.22.12~1.gbp82cafd_arm64.deb to /<<CHROOT>>...
Copying /tmp/debusine-fetch-exec-upload-gjk12ir6/dselect_1.22.12~1.gbp82cafd_arm64.deb to /<<CHROOT>>...
Copying /tmp/debusine-fetch-exec-upload-gjk12ir6/libdpkg-dev_1.22.12~1.gbp82cafd_arm64.deb to /<<CHROOT>>...
Copying /tmp/debusine-fetch-exec-upload-gjk12ir6/dpkg-dev_1.22.12~1.gbp82cafd_all.deb to /<<CHROOT>>...
Copying /tmp/debusine-fetch-exec-upload-gjk12ir6/libdpkg-perl_1.22.12~1.gbp82cafd_all.deb to /<<CHROOT>>...
I: NOTICE: Log filtering will replace 'build/libffi-OYo4q1/resolver-lA9Doi' with '<<RESOLVERDIR>>'
+------------------------------------------------------------------------------+
| Update chroot |
+------------------------------------------------------------------------------+
Get:1 file:/build/libffi-OYo4q1/resolver-lBbbJx/apt_archive ./ InRelease
Ign:1 file:/build/libffi-OYo4q1/resolver-lBbbJx/apt_archive ./ InRelease
Get:2 file:/build/libffi-OYo4q1/resolver-lBbbJx/apt_archive ./ Release [606 B]
Get:3 http://deb.debian.org/debian sid InRelease [202 kB]
Get:2 file:/build/libffi-OYo4q1/resolver-lBbbJx/apt_archive ./ Release [606 B]
Get:4 file:/build/libffi-OYo4q1/resolver-lBbbJx/apt_archive ./ Release.gpg
Ign:4 file:/build/libffi-OYo4q1/resolver-lBbbJx/apt_archive ./ Release.gpg
Get:5 file:/build/libffi-OYo4q1/resolver-lBbbJx/apt_archive ./ Packages [9246 B]
Get:6 http://deb.debian.org/debian sid/main arm64 Packages [9952 kB]
Get:7 http://deb.debian.org/debian sid/main arm64 Components [4909 kB]
Fetched 15.1 MB in 2s (6432 kB/s)
Reading package lists...
Reading package lists...
Building dependency tree...
Reading state information...
Calculating upgrade...
The following packages will be upgraded:
apt bsdextrautils bsdutils debianutils dpkg dpkg-dev libapt-pkg6.0t64
libaudit-common libaudit1 libblkid1 libbrotli1 libcap-ng0 libdpkg-perl
libglib2.0-0t64 libmarkdown2 libmount1 libpcre2-8-0 libseccomp2 libselinux1
libsemanage2 libsmartcols1 libsystemd0 libudev1 libuuid1 libxml2 login
login.defs mount passwd util-linux
30 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
Need to get 9274 kB/12.8 MB of archives.
After this operation, 603 kB disk space will be freed.
Get:1 http://deb.debian.org/debian sid/main arm64 bsdutils arm64 1:2.40.2-11 [104 kB]
Get:2 file:/build/libffi-OYo4q1/resolver-lBbbJx/apt_archive ./ dpkg 1.22.12~1.gbp82cafd [1513 kB]
Get:3 file:/build/libffi-OYo4q1/resolver-lBbbJx/apt_archive ./ dpkg-dev 1.22.12~1.gbp82cafd [1337 kB]
Get:4 http://deb.debian.org/debian sid/main arm64 debianutils arm64 5.21 [92.1 kB]
Get:5 http://deb.debian.org/debian sid/main arm64 libsystemd0 arm64 257~rc2-3 [416 kB]
Get:6 file:/build/libffi-OYo4q1/resolver-lBbbJx/apt_archive ./ libdpkg-perl 1.22.12~1.gbp82cafd [647 kB]
Get:7 http://deb.debian.org/debian sid/main arm64 libudev1 arm64 257~rc2-3 [139 kB]
Get:8 http://deb.debian.org/debian sid/main arm64 libapt-pkg6.0t64 arm64 2.9.11 [921 kB]
Get:9 http://deb.debian.org/debian sid/main arm64 bsdextrautils arm64 2.40.2-11 [91.2 kB]
Get:10 http://deb.debian.org/debian sid/main arm64 libblkid1 arm64 2.40.2-11 [162 kB]
Get:11 http://deb.debian.org/debian sid/main arm64 libmount1 arm64 2.40.2-11 [190 kB]
Get:12 http://deb.debian.org/debian sid/main arm64 libsmartcols1 arm64 2.40.2-11 [135 kB]
Get:13 http://deb.debian.org/debian sid/main arm64 mount arm64 2.40.2-11 [153 kB]
Get:14 http://deb.debian.org/debian sid/main arm64 libuuid1 arm64 2.40.2-11 [35.7 kB]
Get:15 http://deb.debian.org/debian sid/main arm64 util-linux arm64 2.40.2-11 [1170 kB]
Get:16 http://deb.debian.org/debian sid/main arm64 libpcre2-8-0 arm64 10.44-4 [243 kB]
Get:17 http://deb.debian.org/debian sid/main arm64 libselinux1 arm64 3.7-3+b1 [72.1 kB]
Get:18 http://deb.debian.org/debian sid/main arm64 libseccomp2 arm64 2.5.5-1+b3 [46.8 kB]
Get:19 http://deb.debian.org/debian sid/main arm64 apt arm64 2.9.11 [1287 kB]
Get:20 http://deb.debian.org/debian sid/main arm64 libaudit-common all 1:4.0.2-2 [12.7 kB]
Get:21 http://deb.debian.org/debian sid/main arm64 libcap-ng0 arm64 0.8.5-3+b1 [17.0 kB]
Get:22 http://deb.debian.org/debian sid/main arm64 libaudit1 arm64 1:4.0.2-2 [54.2 kB]
Get:23 http://deb.debian.org/debian sid/main arm64 login arm64 1:4.16.0-2+really2.40.2-11 [80.0 kB]
Get:24 http://deb.debian.org/debian sid/main arm64 login.defs all 1:4.16.0-5 [185 kB]
Get:25 http://deb.debian.org/debian sid/main arm64 libsemanage2 arm64 3.7-2+b1 [84.5 kB]
Get:26 http://deb.debian.org/debian sid/main arm64 passwd arm64 1:4.16.0-5 [1210 kB]
Get:27 http://deb.debian.org/debian sid/main arm64 libbrotli1 arm64 1.1.0-2+b6 [297 kB]
Get:28 http://deb.debian.org/debian sid/main arm64 libglib2.0-0t64 arm64 2.82.2-3 [1411 kB]
Get:29 http://deb.debian.org/debian sid/main arm64 libmarkdown2 arm64 2.2.7-2.1 [33.1 kB]
Get:30 http://deb.debian.org/debian sid/main arm64 libxml2 arm64 2.12.7+dfsg+really2.9.14-0.2+b1 [630 kB]
debconf: delaying package configuration, since apt-utils is not installed
Fetched 9274 kB in 0s (62.8 MB/s)
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 17129 files and directories currently installed.)
Preparing to unpack .../bsdutils_1%3a2.40.2-11_arm64.deb ...
Unpacking bsdutils (1:2.40.2-11) over (1:2.40.2-10) ...
Setting up bsdutils (1:2.40.2-11) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 17129 files and directories currently installed.)
Preparing to unpack .../debianutils_5.21_arm64.deb ...
Unpacking debianutils (5.21) over (5.20+b1) ...
Setting up debianutils (5.21) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 17128 files and directories currently installed.)
Preparing to unpack .../libsystemd0_257~rc2-3_arm64.deb ...
Unpacking libsystemd0:arm64 (257~rc2-3) over (257~rc1-4) ...
Setting up libsystemd0:arm64 (257~rc2-3) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 17128 files and directories currently installed.)
Preparing to unpack .../libudev1_257~rc2-3_arm64.deb ...
Unpacking libudev1:arm64 (257~rc2-3) over (257~rc1-4) ...
Setting up libudev1:arm64 (257~rc2-3) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 17128 files and directories currently installed.)
Preparing to unpack .../libapt-pkg6.0t64_2.9.11_arm64.deb ...
Unpacking libapt-pkg6.0t64:arm64 (2.9.11) over (2.9.10) ...
Setting up libapt-pkg6.0t64:arm64 (2.9.11) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 17128 files and directories currently installed.)
Preparing to unpack .../dpkg_1.22.12~1.gbp82cafd_arm64.deb ...
Unpacking dpkg (1.22.12~1.gbp82cafd) over (1.22.11) ...
Setting up dpkg (1.22.12~1.gbp82cafd) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 17127 files and directories currently installed.)
Preparing to unpack .../bsdextrautils_2.40.2-11_arm64.deb ...
Unpacking bsdextrautils (2.40.2-11) over (2.40.2-10) ...
Preparing to unpack .../libblkid1_2.40.2-11_arm64.deb ...
Unpacking libblkid1:arm64 (2.40.2-11) over (2.40.2-10) ...
Setting up libblkid1:arm64 (2.40.2-11) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 17123 files and directories currently installed.)
Preparing to unpack .../libmount1_2.40.2-11_arm64.deb ...
Unpacking libmount1:arm64 (2.40.2-11) over (2.40.2-10) ...
Setting up libmount1:arm64 (2.40.2-11) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 17123 files and directories currently installed.)
Preparing to unpack .../libsmartcols1_2.40.2-11_arm64.deb ...
Unpacking libsmartcols1:arm64 (2.40.2-11) over (2.40.2-10) ...
Setting up libsmartcols1:arm64 (2.40.2-11) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 17123 files and directories currently installed.)
Preparing to unpack .../mount_2.40.2-11_arm64.deb ...
Unpacking mount (2.40.2-11) over (2.40.2-10) ...
Preparing to unpack .../libuuid1_2.40.2-11_arm64.deb ...
Unpacking libuuid1:arm64 (2.40.2-11) over (2.40.2-10) ...
Setting up libuuid1:arm64 (2.40.2-11) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 17123 files and directories currently installed.)
Preparing to unpack .../util-linux_2.40.2-11_arm64.deb ...
Unpacking util-linux (2.40.2-11) over (2.40.2-10) ...
Setting up util-linux (2.40.2-11) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 17120 files and directories currently installed.)
Preparing to unpack .../libpcre2-8-0_10.44-4_arm64.deb ...
Unpacking libpcre2-8-0:arm64 (10.44-4) over (10.42-4+b2) ...
Setting up libpcre2-8-0:arm64 (10.44-4) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 17119 files and directories currently installed.)
Preparing to unpack .../libselinux1_3.7-3+b1_arm64.deb ...
Unpacking libselinux1:arm64 (3.7-3+b1) over (3.7-3) ...
Setting up libselinux1:arm64 (3.7-3+b1) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 17120 files and directories currently installed.)
Preparing to unpack .../libseccomp2_2.5.5-1+b3_arm64.deb ...
Unpacking libseccomp2:arm64 (2.5.5-1+b3) over (2.5.5-1+b2) ...
Setting up libseccomp2:arm64 (2.5.5-1+b3) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 17120 files and directories currently installed.)
Preparing to unpack .../archives/apt_2.9.11_arm64.deb ...
Unpacking apt (2.9.11) over (2.9.10) ...
Setting up apt (2.9.11) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 17117 files and directories currently installed.)
Preparing to unpack .../libaudit-common_1%3a4.0.2-2_all.deb ...
Unpacking libaudit-common (1:4.0.2-2) over (1:4.0.1-3) ...
Setting up libaudit-common (1:4.0.2-2) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 17117 files and directories currently installed.)
Preparing to unpack .../libcap-ng0_0.8.5-3+b1_arm64.deb ...
Unpacking libcap-ng0:arm64 (0.8.5-3+b1) over (0.8.5-3) ...
Setting up libcap-ng0:arm64 (0.8.5-3+b1) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 17118 files and directories currently installed.)
Preparing to unpack .../libaudit1_1%3a4.0.2-2_arm64.deb ...
Unpacking libaudit1:arm64 (1:4.0.2-2) over (1:4.0.1-3) ...
Setting up libaudit1:arm64 (1:4.0.2-2) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 17118 files and directories currently installed.)
Preparing to unpack .../0-login_1%3a4.16.0-2+really2.40.2-11_arm64.deb ...
Unpacking login (1:4.16.0-2+really2.40.2-11) over (1:4.16.0-2+really2.40.2-10) ...
Preparing to unpack .../1-login.defs_1%3a4.16.0-5_all.deb ...
Unpacking login.defs (1:4.16.0-5) over (1:4.16.0-4) ...
Preparing to unpack .../2-libsemanage2_3.7-2+b1_arm64.deb ...
Unpacking libsemanage2:arm64 (3.7-2+b1) over (3.7-2) ...
Preparing to unpack .../3-passwd_1%3a4.16.0-5_arm64.deb ...
Unpacking passwd (1:4.16.0-5) over (1:4.16.0-4) ...
Preparing to unpack .../4-dpkg-dev_1.22.12~1.gbp82cafd_all.deb ...
Unpacking dpkg-dev (1.22.12~1.gbp82cafd) over (1.22.11) ...
Preparing to unpack .../5-libdpkg-perl_1.22.12~1.gbp82cafd_all.deb ...
Unpacking libdpkg-perl (1.22.12~1.gbp82cafd) over (1.22.11) ...
Preparing to unpack .../6-libbrotli1_1.1.0-2+b6_arm64.deb ...
Unpacking libbrotli1:arm64 (1.1.0-2+b6) over (1.1.0-2+b5) ...
Preparing to unpack .../7-libglib2.0-0t64_2.82.2-3_arm64.deb ...
Unpacking libglib2.0-0t64:arm64 (2.82.2-3) over (2.82.2-2) ...
Preparing to unpack .../8-libmarkdown2_2.2.7-2.1_arm64.deb ...
Unpacking libmarkdown2:arm64 (2.2.7-2.1) over (2.2.7-2+b1) ...
Preparing to unpack .../9-libxml2_2.12.7+dfsg+really2.9.14-0.2+b1_arm64.deb ...
Unpacking libxml2:arm64 (2.12.7+dfsg+really2.9.14-0.2+b1) over (2.12.7+dfsg+really2.9.14-0.1) ...
Setting up bsdextrautils (2.40.2-11) ...
Setting up login.defs (1:4.16.0-5) ...
Installing new version of config file /etc/login.defs ...
Setting up libbrotli1:arm64 (1.1.0-2+b6) ...
Setting up libglib2.0-0t64:arm64 (2.82.2-3) ...
No schema files found: doing nothing.
Setting up libdpkg-perl (1.22.12~1.gbp82cafd) ...
Setting up mount (2.40.2-11) ...
Setting up libsemanage2:arm64 (3.7-2+b1) ...
Setting up libxml2:arm64 (2.12.7+dfsg+really2.9.14-0.2+b1) ...
Setting up libmarkdown2:arm64 (2.2.7-2.1) ...
Setting up login (1:4.16.0-2+really2.40.2-11) ...
Setting up dpkg-dev (1.22.12~1.gbp82cafd) ...
Setting up passwd (1:4.16.0-5) ...
Processing triggers for man-db (2.13.0-1) ...
Processing triggers for libc-bin (2.40-3) ...
+------------------------------------------------------------------------------+
| Fetch source files |
+------------------------------------------------------------------------------+
Local sources
-------------
/tmp/debusine-fetch-exec-upload-gjk12ir6/libffi_3.4.6-1.dsc exists in /tmp/debusine-fetch-exec-upload-gjk12ir6; copying to chroot
I: NOTICE: Log filtering will replace 'build/libffi-OYo4q1/libffi-3.4.6' with '<<PKGBUILDDIR>>'
I: NOTICE: Log filtering will replace 'build/libffi-OYo4q1' with '<<BUILDDIR>>'
+------------------------------------------------------------------------------+
| Install package build dependencies |
+------------------------------------------------------------------------------+
Setup apt archive
-----------------
Merged Build-Depends: debhelper (>= 11), libltdl-dev, dejagnu, texinfo, build-essential, fakeroot
Filtered Build-Depends: debhelper (>= 11), libltdl-dev, dejagnu, texinfo, build-essential, fakeroot
dpkg-deb: warning: root directory has unusual owner or group 998:999.
Hint: either pass --root-owner-group, see dpkg-build-api(7) or add an explicit 'Rules-Requires-Root: no' in debian/control.
dpkg-deb: warning: ignoring 1 warning about the control file(s)
dpkg-deb: building package 'sbuild-build-depends-main-dummy' in '/<<RESOLVERDIR>>/apt_archive/sbuild-build-depends-main-dummy.deb'.
Ign:1 copy:/<<RESOLVERDIR>>/apt_archive ./ InRelease
Get:2 copy:/<<RESOLVERDIR>>/apt_archive ./ Release [609 B]
Ign:3 copy:/<<RESOLVERDIR>>/apt_archive ./ Release.gpg
Get:4 copy:/<<RESOLVERDIR>>/apt_archive ./ Sources [642 B]
Get:5 copy:/<<RESOLVERDIR>>/apt_archive ./ Packages [674 B]
Fetched 1925 B in 0s (171 kB/s)
Reading package lists...
Get:1 file:/<<BUILDDIR>>/resolver-lBbbJx/apt_archive ./ InRelease
Ign:1 file:/<<BUILDDIR>>/resolver-lBbbJx/apt_archive ./ InRelease
Get:2 file:/<<BUILDDIR>>/resolver-lBbbJx/apt_archive ./ Release [606 B]
Get:2 file:/<<BUILDDIR>>/resolver-lBbbJx/apt_archive ./ Release [606 B]
Get:3 file:/<<BUILDDIR>>/resolver-lBbbJx/apt_archive ./ Release.gpg
Ign:3 file:/<<BUILDDIR>>/resolver-lBbbJx/apt_archive ./ Release.gpg
Reading package lists...
Reading package lists...
Install main build dependencies (apt-based resolver)
----------------------------------------------------
Installing build dependencies
Reading package lists...
Building dependency tree...
Reading state information...
The following additional packages will be installed:
autoconf automake autopoint autotools-dev build-essential cpp cpp-14
cpp-14-aarch64-linux-gnu cpp-aarch64-linux-gnu debhelper dejagnu
dh-autoreconf dh-strip-nondeterminism dwz expect fakeroot g++ g++-14
g++-14-aarch64-linux-gnu g++-aarch64-linux-gnu gcc gcc-14
gcc-14-aarch64-linux-gnu gcc-aarch64-linux-gnu libasan8 libc-dev-bin
libc6-dev libcc1-0 libcrypt-dev libdebhelper-perl libelf1t64 libfakeroot
libfile-stripnondeterminism-perl libgcc-14-dev libhwasan0 libisl23 libitm1
liblsan0 libltdl-dev libltdl7 libmpc3 libmpfr6 libstdc++-14-dev libtcl8.6
libtext-unidecode-perl libtool libtsan2 libubsan1 linux-libc-dev m4
po-debconf rpcsvc-proto sgml-base tcl-expect tcl8.6 tex-common texinfo
texinfo-lib
Suggested packages:
autoconf-archive gnu-standards autoconf-doc cpp-doc gcc-14-locales
cpp-14-doc dh-make tk8.6 gcc-14-doc gcc-multilib manpages-dev flex bison gdb
gcc-doc gdb-aarch64-linux-gnu libc-devtools glibc-doc libtool-doc
libstdc++-14-doc gfortran | fortran95-compiler gcj-jdk m4-doc
libmail-box-perl sgml-base-doc tcl-tclreadline texlive-base
texlive-latex-base texlive-plain-generic texlive-fonts-recommended
Recommended packages:
manpages manpages-dev libarchive-cpio-perl libmail-sendmail-perl
The following NEW packages will be installed:
autoconf automake autopoint autotools-dev build-essential cpp cpp-14
cpp-14-aarch64-linux-gnu cpp-aarch64-linux-gnu debhelper dejagnu
dh-autoreconf dh-strip-nondeterminism dwz expect fakeroot g++ g++-14
g++-14-aarch64-linux-gnu g++-aarch64-linux-gnu gcc gcc-14
gcc-14-aarch64-linux-gnu gcc-aarch64-linux-gnu libasan8 libc-dev-bin
libc6-dev libcc1-0 libcrypt-dev libdebhelper-perl libelf1t64 libfakeroot
libfile-stripnondeterminism-perl libgcc-14-dev libhwasan0 libisl23 libitm1
liblsan0 libltdl-dev libltdl7 libmpc3 libmpfr6 libstdc++-14-dev libtcl8.6
libtext-unidecode-perl libtool libtsan2 libubsan1 linux-libc-dev m4
po-debconf rpcsvc-proto sbuild-build-depends-main-dummy sgml-base tcl-expect
tcl8.6 tex-common texinfo texinfo-lib
0 upgraded, 59 newly installed, 0 to remove and 0 not upgraded.
Need to get 66.1 MB of archives.
After this operation, 259 MB of additional disk space will be used.
Get:1 copy:/<<RESOLVERDIR>>/apt_archive ./ sbuild-build-depends-main-dummy 0.invalid.0 [904 B]
Get:2 http://deb.debian.org/debian sid/main arm64 sgml-base all 1.31 [15.4 kB]
Get:3 http://deb.debian.org/debian sid/main arm64 m4 arm64 1.4.19-4 [277 kB]
Get:4 http://deb.debian.org/debian sid/main arm64 autoconf all 2.72-3 [493 kB]
Get:5 http://deb.debian.org/debian sid/main arm64 autotools-dev all 20220109.1 [51.6 kB]
Get:6 http://deb.debian.org/debian sid/main arm64 automake all 1:1.16.5-1.3 [823 kB]
Get:7 http://deb.debian.org/debian sid/main arm64 autopoint all 0.22.5-2 [723 kB]
Get:8 http://deb.debian.org/debian sid/main arm64 libc-dev-bin arm64 2.40-3 [50.9 kB]
Get:9 http://deb.debian.org/debian sid/main arm64 linux-libc-dev all 6.11.7-1 [2454 kB]
Get:10 http://deb.debian.org/debian sid/main arm64 libcrypt-dev arm64 1:4.4.36-5 [122 kB]
Get:11 http://deb.debian.org/debian sid/main arm64 rpcsvc-proto arm64 1.4.3-1+b1 [60.5 kB]
Get:12 http://deb.debian.org/debian sid/main arm64 libc6-dev arm64 2.40-3 [1591 kB]
Get:13 http://deb.debian.org/debian sid/main arm64 libisl23 arm64 0.27-1 [601 kB]
Get:14 http://deb.debian.org/debian sid/main arm64 libmpfr6 arm64 4.2.1-1+b2 [680 kB]
Get:15 http://deb.debian.org/debian sid/main arm64 libmpc3 arm64 1.3.1-1+b3 [50.5 kB]
Get:16 http://deb.debian.org/debian sid/main arm64 cpp-14-aarch64-linux-gnu arm64 14.2.0-8 [9166 kB]
Get:17 http://deb.debian.org/debian sid/main arm64 cpp-14 arm64 14.2.0-8 [1284 B]
Get:18 http://deb.debian.org/debian sid/main arm64 cpp-aarch64-linux-gnu arm64 4:14.2.0-1 [4832 B]
Get:19 http://deb.debian.org/debian sid/main arm64 cpp arm64 4:14.2.0-1 [1568 B]
Get:20 http://deb.debian.org/debian sid/main arm64 libcc1-0 arm64 14.2.0-8 [42.2 kB]
Get:21 http://deb.debian.org/debian sid/main arm64 libitm1 arm64 14.2.0-8 [24.2 kB]
Get:22 http://deb.debian.org/debian sid/main arm64 libasan8 arm64 14.2.0-8 [2579 kB]
Get:23 http://deb.debian.org/debian sid/main arm64 liblsan0 arm64 14.2.0-8 [1161 kB]
Get:24 http://deb.debian.org/debian sid/main arm64 libtsan2 arm64 14.2.0-8 [2386 kB]
Get:25 http://deb.debian.org/debian sid/main arm64 libubsan1 arm64 14.2.0-8 [1039 kB]
Get:26 http://deb.debian.org/debian sid/main arm64 libhwasan0 arm64 14.2.0-8 [1442 kB]
Get:27 http://deb.debian.org/debian sid/main arm64 libgcc-14-dev arm64 14.2.0-8 [2365 kB]
Get:28 http://deb.debian.org/debian sid/main arm64 gcc-14-aarch64-linux-gnu arm64 14.2.0-8 [17.7 MB]
Get:29 http://deb.debian.org/debian sid/main arm64 gcc-14 arm64 14.2.0-8 [519 kB]
Get:30 http://deb.debian.org/debian sid/main arm64 gcc-aarch64-linux-gnu arm64 4:14.2.0-1 [1440 B]
Get:31 http://deb.debian.org/debian sid/main arm64 gcc arm64 4:14.2.0-1 [5136 B]
Get:32 http://deb.debian.org/debian sid/main arm64 libstdc++-14-dev arm64 14.2.0-8 [2267 kB]
Get:33 http://deb.debian.org/debian sid/main arm64 g++-14-aarch64-linux-gnu arm64 14.2.0-8 [10.1 MB]
Get:34 http://deb.debian.org/debian sid/main arm64 g++-14 arm64 14.2.0-8 [20.2 kB]
Get:35 http://deb.debian.org/debian sid/main arm64 g++-aarch64-linux-gnu arm64 4:14.2.0-1 [1200 B]
Get:36 http://deb.debian.org/debian sid/main arm64 g++ arm64 4:14.2.0-1 [1332 B]
Get:37 http://deb.debian.org/debian sid/main arm64 build-essential arm64 12.12 [4624 B]
Get:38 http://deb.debian.org/debian sid/main arm64 libdebhelper-perl all 13.20 [89.7 kB]
Get:39 http://deb.debian.org/debian sid/main arm64 libtool all 2.4.7-8 [517 kB]
Get:40 http://deb.debian.org/debian sid/main arm64 dh-autoreconf all 20 [17.1 kB]
Get:41 http://deb.debian.org/debian sid/main arm64 libfile-stripnondeterminism-perl all 1.14.0-1 [19.5 kB]
Get:42 http://deb.debian.org/debian sid/main arm64 dh-strip-nondeterminism all 1.14.0-1 [8448 B]
Get:43 http://deb.debian.org/debian sid/main arm64 libelf1t64 arm64 0.192-4 [189 kB]
Get:44 http://deb.debian.org/debian sid/main arm64 dwz arm64 0.15-1+b1 [102 kB]
Get:45 http://deb.debian.org/debian sid/main arm64 po-debconf all 1.0.21+nmu1 [248 kB]
Get:46 http://deb.debian.org/debian sid/main arm64 debhelper all 13.20 [915 kB]
Get:47 http://deb.debian.org/debian sid/main arm64 libtcl8.6 arm64 8.6.15+dfsg-2 [982 kB]
Get:48 http://deb.debian.org/debian sid/main arm64 tcl8.6 arm64 8.6.15+dfsg-2 [121 kB]
Get:49 http://deb.debian.org/debian sid/main arm64 tcl-expect arm64 5.45.4-3+b1 [123 kB]
Get:50 http://deb.debian.org/debian sid/main arm64 expect arm64 5.45.4-3+b1 [159 kB]
Get:51 http://deb.debian.org/debian sid/main arm64 dejagnu all 1.6.3-1 [1050 kB]
Get:52 http://deb.debian.org/debian sid/main arm64 libfakeroot arm64 1.36-1 [29.1 kB]
Get:53 http://deb.debian.org/debian sid/main arm64 fakeroot arm64 1.36-1 [74.4 kB]
Get:54 http://deb.debian.org/debian sid/main arm64 libltdl7 arm64 2.4.7-8 [392 kB]
Get:55 http://deb.debian.org/debian sid/main arm64 libltdl-dev arm64 2.4.7-8 [165 kB]
Get:56 http://deb.debian.org/debian sid/main arm64 libtext-unidecode-perl all 1.30-3 [101 kB]
Get:57 http://deb.debian.org/debian sid/main arm64 tex-common all 6.18 [32.5 kB]
Get:58 http://deb.debian.org/debian sid/main arm64 texinfo-lib arm64 7.1.1-1+b1 [220 kB]
Get:59 http://deb.debian.org/debian sid/main arm64 texinfo all 7.1.1-1 [1753 kB]
debconf: delaying package configuration, since apt-utils is not installed
Fetched 66.1 MB in 1s (101 MB/s)
Selecting previously unselected package sgml-base.
(Reading database ... 17119 files and directories currently installed.)
Preparing to unpack .../00-sgml-base_1.31_all.deb ...
Unpacking sgml-base (1.31) ...
Selecting previously unselected package m4.
Preparing to unpack .../01-m4_1.4.19-4_arm64.deb ...
Unpacking m4 (1.4.19-4) ...
Selecting previously unselected package autoconf.
Preparing to unpack .../02-autoconf_2.72-3_all.deb ...
Unpacking autoconf (2.72-3) ...
Selecting previously unselected package autotools-dev.
Preparing to unpack .../03-autotools-dev_20220109.1_all.deb ...
Unpacking autotools-dev (20220109.1) ...
Selecting previously unselected package automake.
Preparing to unpack .../04-automake_1%3a1.16.5-1.3_all.deb ...
Unpacking automake (1:1.16.5-1.3) ...
Selecting previously unselected package autopoint.
Preparing to unpack .../05-autopoint_0.22.5-2_all.deb ...
Unpacking autopoint (0.22.5-2) ...
Selecting previously unselected package libc-dev-bin.
Preparing to unpack .../06-libc-dev-bin_2.40-3_arm64.deb ...
Unpacking libc-dev-bin (2.40-3) ...
Selecting previously unselected package linux-libc-dev.
Preparing to unpack .../07-linux-libc-dev_6.11.7-1_all.deb ...
Unpacking linux-libc-dev (6.11.7-1) ...
Selecting previously unselected package libcrypt-dev:arm64.
Preparing to unpack .../08-libcrypt-dev_1%3a4.4.36-5_arm64.deb ...
Unpacking libcrypt-dev:arm64 (1:4.4.36-5) ...
Selecting previously unselected package rpcsvc-proto.
Preparing to unpack .../09-rpcsvc-proto_1.4.3-1+b1_arm64.deb ...
Unpacking rpcsvc-proto (1.4.3-1+b1) ...
Selecting previously unselected package libc6-dev:arm64.
Preparing to unpack .../10-libc6-dev_2.40-3_arm64.deb ...
Unpacking libc6-dev:arm64 (2.40-3) ...
Selecting previously unselected package libisl23:arm64.
Preparing to unpack .../11-libisl23_0.27-1_arm64.deb ...
Unpacking libisl23:arm64 (0.27-1) ...
Selecting previously unselected package libmpfr6:arm64.
Preparing to unpack .../12-libmpfr6_4.2.1-1+b2_arm64.deb ...
Unpacking libmpfr6:arm64 (4.2.1-1+b2) ...
Selecting previously unselected package libmpc3:arm64.
Preparing to unpack .../13-libmpc3_1.3.1-1+b3_arm64.deb ...
Unpacking libmpc3:arm64 (1.3.1-1+b3) ...
Selecting previously unselected package cpp-14-aarch64-linux-gnu.
Preparing to unpack .../14-cpp-14-aarch64-linux-gnu_14.2.0-8_arm64.deb ...
Unpacking cpp-14-aarch64-linux-gnu (14.2.0-8) ...
Selecting previously unselected package cpp-14.
Preparing to unpack .../15-cpp-14_14.2.0-8_arm64.deb ...
Unpacking cpp-14 (14.2.0-8) ...
Selecting previously unselected package cpp-aarch64-linux-gnu.
Preparing to unpack .../16-cpp-aarch64-linux-gnu_4%3a14.2.0-1_arm64.deb ...
Unpacking cpp-aarch64-linux-gnu (4:14.2.0-1) ...
Selecting previously unselected package cpp.
Preparing to unpack .../17-cpp_4%3a14.2.0-1_arm64.deb ...
Unpacking cpp (4:14.2.0-1) ...
Selecting previously unselected package libcc1-0:arm64.
Preparing to unpack .../18-libcc1-0_14.2.0-8_arm64.deb ...
Unpacking libcc1-0:arm64 (14.2.0-8) ...
Selecting previously unselected package libitm1:arm64.
Preparing to unpack .../19-libitm1_14.2.0-8_arm64.deb ...
Unpacking libitm1:arm64 (14.2.0-8) ...
Selecting previously unselected package libasan8:arm64.
Preparing to unpack .../20-libasan8_14.2.0-8_arm64.deb ...
Unpacking libasan8:arm64 (14.2.0-8) ...
Selecting previously unselected package liblsan0:arm64.
Preparing to unpack .../21-liblsan0_14.2.0-8_arm64.deb ...
Unpacking liblsan0:arm64 (14.2.0-8) ...
Selecting previously unselected package libtsan2:arm64.
Preparing to unpack .../22-libtsan2_14.2.0-8_arm64.deb ...
Unpacking libtsan2:arm64 (14.2.0-8) ...
Selecting previously unselected package libubsan1:arm64.
Preparing to unpack .../23-libubsan1_14.2.0-8_arm64.deb ...
Unpacking libubsan1:arm64 (14.2.0-8) ...
Selecting previously unselected package libhwasan0:arm64.
Preparing to unpack .../24-libhwasan0_14.2.0-8_arm64.deb ...
Unpacking libhwasan0:arm64 (14.2.0-8) ...
Selecting previously unselected package libgcc-14-dev:arm64.
Preparing to unpack .../25-libgcc-14-dev_14.2.0-8_arm64.deb ...
Unpacking libgcc-14-dev:arm64 (14.2.0-8) ...
Selecting previously unselected package gcc-14-aarch64-linux-gnu.
Preparing to unpack .../26-gcc-14-aarch64-linux-gnu_14.2.0-8_arm64.deb ...
Unpacking gcc-14-aarch64-linux-gnu (14.2.0-8) ...
Selecting previously unselected package gcc-14.
Preparing to unpack .../27-gcc-14_14.2.0-8_arm64.deb ...
Unpacking gcc-14 (14.2.0-8) ...
Selecting previously unselected package gcc-aarch64-linux-gnu.
Preparing to unpack .../28-gcc-aarch64-linux-gnu_4%3a14.2.0-1_arm64.deb ...
Unpacking gcc-aarch64-linux-gnu (4:14.2.0-1) ...
Selecting previously unselected package gcc.
Preparing to unpack .../29-gcc_4%3a14.2.0-1_arm64.deb ...
Unpacking gcc (4:14.2.0-1) ...
Selecting previously unselected package libstdc++-14-dev:arm64.
Preparing to unpack .../30-libstdc++-14-dev_14.2.0-8_arm64.deb ...
Unpacking libstdc++-14-dev:arm64 (14.2.0-8) ...
Selecting previously unselected package g++-14-aarch64-linux-gnu.
Preparing to unpack .../31-g++-14-aarch64-linux-gnu_14.2.0-8_arm64.deb ...
Unpacking g++-14-aarch64-linux-gnu (14.2.0-8) ...
Selecting previously unselected package g++-14.
Preparing to unpack .../32-g++-14_14.2.0-8_arm64.deb ...
Unpacking g++-14 (14.2.0-8) ...
Selecting previously unselected package g++-aarch64-linux-gnu.
Preparing to unpack .../33-g++-aarch64-linux-gnu_4%3a14.2.0-1_arm64.deb ...
Unpacking g++-aarch64-linux-gnu (4:14.2.0-1) ...
Selecting previously unselected package g++.
Preparing to unpack .../34-g++_4%3a14.2.0-1_arm64.deb ...
Unpacking g++ (4:14.2.0-1) ...
Selecting previously unselected package build-essential.
Preparing to unpack .../35-build-essential_12.12_arm64.deb ...
Unpacking build-essential (12.12) ...
Selecting previously unselected package libdebhelper-perl.
Preparing to unpack .../36-libdebhelper-perl_13.20_all.deb ...
Unpacking libdebhelper-perl (13.20) ...
Selecting previously unselected package libtool.
Preparing to unpack .../37-libtool_2.4.7-8_all.deb ...
Unpacking libtool (2.4.7-8) ...
Selecting previously unselected package dh-autoreconf.
Preparing to unpack .../38-dh-autoreconf_20_all.deb ...
Unpacking dh-autoreconf (20) ...
Selecting previously unselected package libfile-stripnondeterminism-perl.
Preparing to unpack .../39-libfile-stripnondeterminism-perl_1.14.0-1_all.deb ...
Unpacking libfile-stripnondeterminism-perl (1.14.0-1) ...
Selecting previously unselected package dh-strip-nondeterminism.
Preparing to unpack .../40-dh-strip-nondeterminism_1.14.0-1_all.deb ...
Unpacking dh-strip-nondeterminism (1.14.0-1) ...
Selecting previously unselected package libelf1t64:arm64.
Preparing to unpack .../41-libelf1t64_0.192-4_arm64.deb ...
Unpacking libelf1t64:arm64 (0.192-4) ...
Selecting previously unselected package dwz.
Preparing to unpack .../42-dwz_0.15-1+b1_arm64.deb ...
Unpacking dwz (0.15-1+b1) ...
Selecting previously unselected package po-debconf.
Preparing to unpack .../43-po-debconf_1.0.21+nmu1_all.deb ...
Unpacking po-debconf (1.0.21+nmu1) ...
Selecting previously unselected package debhelper.
Preparing to unpack .../44-debhelper_13.20_all.deb ...
Unpacking debhelper (13.20) ...
Selecting previously unselected package libtcl8.6:arm64.
Preparing to unpack .../45-libtcl8.6_8.6.15+dfsg-2_arm64.deb ...
Unpacking libtcl8.6:arm64 (8.6.15+dfsg-2) ...
Selecting previously unselected package tcl8.6.
Preparing to unpack .../46-tcl8.6_8.6.15+dfsg-2_arm64.deb ...
Unpacking tcl8.6 (8.6.15+dfsg-2) ...
Selecting previously unselected package tcl-expect:arm64.
Preparing to unpack .../47-tcl-expect_5.45.4-3+b1_arm64.deb ...
Unpacking tcl-expect:arm64 (5.45.4-3+b1) ...
Selecting previously unselected package expect.
Preparing to unpack .../48-expect_5.45.4-3+b1_arm64.deb ...
Unpacking expect (5.45.4-3+b1) ...
Selecting previously unselected package dejagnu.
Preparing to unpack .../49-dejagnu_1.6.3-1_all.deb ...
Unpacking dejagnu (1.6.3-1) ...
Selecting previously unselected package libfakeroot:arm64.
Preparing to unpack .../50-libfakeroot_1.36-1_arm64.deb ...
Unpacking libfakeroot:arm64 (1.36-1) ...
Selecting previously unselected package fakeroot.
Preparing to unpack .../51-fakeroot_1.36-1_arm64.deb ...
Unpacking fakeroot (1.36-1) ...
Selecting previously unselected package libltdl7:arm64.
Preparing to unpack .../52-libltdl7_2.4.7-8_arm64.deb ...
Unpacking libltdl7:arm64 (2.4.7-8) ...
Selecting previously unselected package libltdl-dev:arm64.
Preparing to unpack .../53-libltdl-dev_2.4.7-8_arm64.deb ...
Unpacking libltdl-dev:arm64 (2.4.7-8) ...
Selecting previously unselected package libtext-unidecode-perl.
Preparing to unpack .../54-libtext-unidecode-perl_1.30-3_all.deb ...
Unpacking libtext-unidecode-perl (1.30-3) ...
Selecting previously unselected package tex-common.
Preparing to unpack .../55-tex-common_6.18_all.deb ...
Unpacking tex-common (6.18) ...
Selecting previously unselected package texinfo-lib.
Preparing to unpack .../56-texinfo-lib_7.1.1-1+b1_arm64.deb ...
Unpacking texinfo-lib (7.1.1-1+b1) ...
Selecting previously unselected package texinfo.
Preparing to unpack .../57-texinfo_7.1.1-1_all.deb ...
Unpacking texinfo (7.1.1-1) ...
Selecting previously unselected package sbuild-build-depends-main-dummy.
Preparing to unpack .../58-sbuild-build-depends-main-dummy_0.invalid.0_arm64.deb ...
Unpacking sbuild-build-depends-main-dummy (0.invalid.0) ...
Setting up libfile-stripnondeterminism-perl (1.14.0-1) ...
Setting up po-debconf (1.0.21+nmu1) ...
Setting up libdebhelper-perl (13.20) ...
Setting up linux-libc-dev (6.11.7-1) ...
Setting up m4 (1.4.19-4) ...
Setting up texinfo-lib (7.1.1-1+b1) ...
Setting up libfakeroot:arm64 (1.36-1) ...
Setting up libelf1t64:arm64 (0.192-4) ...
Setting up fakeroot (1.36-1) ...
update-alternatives: using /usr/bin/fakeroot-sysv to provide /usr/bin/fakeroot (fakeroot) in auto mode
Setting up tex-common (6.18) ...
update-language: texlive-base not installed and configured, doing nothing!
Setting up autotools-dev (20220109.1) ...
Setting up rpcsvc-proto (1.4.3-1+b1) ...
Setting up libmpfr6:arm64 (4.2.1-1+b2) ...
Setting up libmpc3:arm64 (1.3.1-1+b3) ...
Setting up libtcl8.6:arm64 (8.6.15+dfsg-2) ...
Setting up autopoint (0.22.5-2) ...
Setting up libltdl7:arm64 (2.4.7-8) ...
Setting up autoconf (2.72-3) ...
Setting up libubsan1:arm64 (14.2.0-8) ...
Setting up dh-strip-nondeterminism (1.14.0-1) ...
Setting up dwz (0.15-1+b1) ...
Setting up libhwasan0:arm64 (14.2.0-8) ...
Setting up libcrypt-dev:arm64 (1:4.4.36-5) ...
Setting up libasan8:arm64 (14.2.0-8) ...
Setting up sgml-base (1.31) ...
Setting up libtsan2:arm64 (14.2.0-8) ...
Setting up libisl23:arm64 (0.27-1) ...
Setting up libtext-unidecode-perl (1.30-3) ...
Setting up libc-dev-bin (2.40-3) ...
Setting up libcc1-0:arm64 (14.2.0-8) ...
Setting up liblsan0:arm64 (14.2.0-8) ...
Setting up libitm1:arm64 (14.2.0-8) ...
Setting up automake (1:1.16.5-1.3) ...
update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode
Setting up tcl8.6 (8.6.15+dfsg-2) ...
Setting up tcl-expect:arm64 (5.45.4-3+b1) ...
Setting up libltdl-dev:arm64 (2.4.7-8) ...
Setting up texinfo (7.1.1-1) ...
Setting up cpp-14-aarch64-linux-gnu (14.2.0-8) ...
Setting up libc6-dev:arm64 (2.40-3) ...
Setting up libgcc-14-dev:arm64 (14.2.0-8) ...
Setting up libstdc++-14-dev:arm64 (14.2.0-8) ...
Setting up expect (5.45.4-3+b1) ...
Setting up cpp-aarch64-linux-gnu (4:14.2.0-1) ...
Setting up cpp-14 (14.2.0-8) ...
Setting up cpp (4:14.2.0-1) ...
Setting up gcc-14-aarch64-linux-gnu (14.2.0-8) ...
Setting up dejagnu (1.6.3-1) ...
Setting up gcc-aarch64-linux-gnu (4:14.2.0-1) ...
Setting up g++-14-aarch64-linux-gnu (14.2.0-8) ...
Setting up gcc-14 (14.2.0-8) ...
Setting up g++-aarch64-linux-gnu (4:14.2.0-1) ...
Setting up g++-14 (14.2.0-8) ...
Setting up libtool (2.4.7-8) ...
Setting up gcc (4:14.2.0-1) ...
Setting up dh-autoreconf (20) ...
Setting up g++ (4:14.2.0-1) ...
update-alternatives: using /usr/bin/g++ to provide /usr/bin/c++ (c++) in auto mode
Setting up build-essential (12.12) ...
Setting up debhelper (13.20) ...
Setting up sbuild-build-depends-main-dummy (0.invalid.0) ...
Processing triggers for man-db (2.13.0-1) ...
Processing triggers for libc-bin (2.40-3) ...
+------------------------------------------------------------------------------+
| Check architectures |
+------------------------------------------------------------------------------+
Arch check ok (arm64 included in any)
+------------------------------------------------------------------------------+
| Build environment |
+------------------------------------------------------------------------------+
Kernel: Linux 6.1.0-27-cloud-arm64 #1 SMP Debian 6.1.115-1 (2024-11-01) arm64 (aarch64)
Toolchain package versions: binutils_2.43.1-5 dpkg-dev_1.22.12~1.gbp82cafd g++-14_14.2.0-8 gcc-14_14.2.0-8 libc6-dev_2.40-3 libstdc++-14-dev_14.2.0-8 libstdc++6_14.2.0-8 linux-libc-dev_6.11.7-1
Package versions: appstream_1.0.3-1+b1 apt_2.9.11 autoconf_2.72-3 automake_1:1.16.5-1.3 autopoint_0.22.5-2 autotools-dev_20220109.1 base-files_13.5 base-passwd_3.6.5 bash_5.2.32-1+b2 binutils_2.43.1-5 binutils-aarch64-linux-gnu_2.43.1-5 binutils-common_2.43.1-5 bsdextrautils_2.40.2-11 bsdutils_1:2.40.2-11 build-essential_12.12 bzip2_1.0.8-6 ca-certificates_20240203 coreutils_9.5-1+b1 cpp_4:14.2.0-1 cpp-14_14.2.0-8 cpp-14-aarch64-linux-gnu_14.2.0-8 cpp-aarch64-linux-gnu_4:14.2.0-1 dash_0.5.12-9+b1 debconf_1.5.87 debhelper_13.20 debian-archive-keyring_2023.4 debianutils_5.21 dejagnu_1.6.3-1 dh-autoreconf_20 dh-strip-nondeterminism_1.14.0-1 diffstat_1.66-1+b1 diffutils_1:3.10-1+b1 dpkg_1.22.12~1.gbp82cafd dpkg-dev_1.22.12~1.gbp82cafd dwz_0.15-1+b1 e2fsprogs_1.47.1-1+b1 expect_5.45.4-3+b1 fakeroot_1.36-1 file_1:5.45-3+b1 findutils_4.10.0-3 g++_4:14.2.0-1 g++-14_14.2.0-8 g++-14-aarch64-linux-gnu_14.2.0-8 g++-aarch64-linux-gnu_4:14.2.0-1 gcc_4:14.2.0-1 gcc-14_14.2.0-8 gcc-14-aarch64-linux-gnu_14.2.0-8 gcc-14-base_14.2.0-8 gcc-aarch64-linux-gnu_4:14.2.0-1 gettext_0.22.5-2 gettext-base_0.22.5-2 gpg_2.2.45-2 gpgconf_2.2.45-2 gpgv_2.2.45-2 grep_3.11-4+b1 groff-base_1.23.0-5 gzip_1.12-1.1+b1 hostname_3.25 init-system-helpers_1.67 intltool-debian_0.35.0+20060710.6 iso-codes_4.17.0-1 libacl1_2.3.2-2+b1 libaliased-perl_0.34-3 libappstream5_1.0.3-1+b1 libapt-pkg-perl_0.1.40+b6 libapt-pkg6.0t64_2.9.11 libarchive-zip-perl_1.68-1 libasan8_14.2.0-8 libassuan9_3.0.1-2 libatomic1_14.2.0-8 libattr1_1:2.5.2-2 libaudit-common_1:4.0.2-2 libaudit1_1:4.0.2-2 libb-hooks-endofscope-perl_0.28-1 libb-hooks-op-check-perl_0.22-3+b2 libberkeleydb-perl_0.66-1 libbinutils_2.43.1-5 libblkid1_2.40.2-11 libbrotli1_1.1.0-2+b6 libbsd0_0.12.2-2 libbz2-1.0_1.0.8-6 libc-bin_2.40-3 libc-dev-bin_2.40-3 libc6_2.40-3 libc6-dev_2.40-3 libcap-ng0_0.8.5-3+b1 libcap2_1:2.66-5+b1 libcapture-tiny-perl_0.48-2 libcc1-0_14.2.0-8 libcgi-pm-perl_4.66-1 libclass-data-inheritable-perl_0.10-1 libclass-inspector-perl_1.36-3 libclass-method-modifiers-perl_2.15-1 libclass-xsaccessor-perl_1.19-4+b4 libclone-perl_0.47-1+b1 libcom-err2_1.47.1-1+b1 libconfig-tiny-perl_2.30-1 libconst-fast-perl_0.014-2 libcpanel-json-xs-perl_4.38-1+b1 libcrypt-dev_1:4.4.36-5 libcrypt1_1:4.4.36-5 libctf-nobfd0_2.43.1-5 libctf0_2.43.1-5 libcurl3t64-gnutls_8.11.0-1 libdata-dpath-perl_0.60-1 libdata-messagepack-perl_1.02-1+b4 libdata-optlist-perl_0.114-1 libdata-validate-domain-perl_0.15-1 libdata-validate-ip-perl_0.31-1 libdata-validate-uri-perl_0.07-3 libdb5.3t64_5.3.28+dfsg2-9 libdebconfclient0_0.273 libdebhelper-perl_13.20 libdevel-callchecker-perl_0.009-1+b1 libdevel-size-perl_0.84-1+b1 libdevel-stacktrace-perl_2.0500-1 libdpkg-perl_1.22.12~1.gbp82cafd libdynaloader-functions-perl_0.004-1 libelf1t64_0.192-4 libemail-address-xs-perl_1.05-1+b4 libencode-locale-perl_1.05-3 libexception-class-perl_1.45-1 libext2fs2t64_1.47.1-1+b1 libfakeroot_1.36-1 libffi8_3.4.6-1 libfile-basedir-perl_0.09-2 libfile-find-rule-perl_0.34-3 libfile-listing-perl_6.16-1 libfile-sharedir-perl_1.118-3 libfile-stripnondeterminism-perl_1.14.0-1 libfont-ttf-perl_1.06-2 libgcc-14-dev_14.2.0-8 libgcc-s1_14.2.0-8 libgcrypt20_1.11.0-6 libgdbm-compat4t64_1.24-2 libgdbm6t64_1.24-2 libglib2.0-0t64_2.82.2-3 libgmp10_2:6.3.0+dfsg-2+b2 libgnutls30t64_3.8.8-2 libgomp1_14.2.0-8 libgpg-error0_1.50-4 libgprofng0_2.43.1-5 libgssapi-krb5-2_1.21.3-3 libhogweed6t64_3.10-1+b1 libhtml-form-perl_6.12-1 libhtml-html5-entities-perl_0.004-3 libhtml-parser-perl_3.83-1+b1 libhtml-tagset-perl_3.24-1 libhtml-tokeparser-simple-perl_3.16-4 libhtml-tree-perl_5.07-3 libhttp-cookies-perl_6.11-1 libhttp-date-perl_6.06-1 libhttp-message-perl_7.00-2 libhttp-negotiate-perl_6.01-2 libhwasan0_14.2.0-8 libicu72_72.1-5+b1 libidn2-0_2.3.7-2+b1 libimport-into-perl_1.002005-2 libio-html-perl_1.004-3 libio-interactive-perl_1.025-1 libio-socket-ssl-perl_2.089-1 libio-string-perl_1.08-4 libipc-run3-perl_0.049-1 libipc-system-simple-perl_1.30-2 libisl23_0.27-1 libiterator-perl_0.03+ds1-2 libiterator-util-perl_0.02+ds1-2 libitm1_14.2.0-8 libjansson4_2.14-2+b3 libjson-maybexs-perl_1.004008-1 libk5crypto3_1.21.3-3 libkeyutils1_1.6.3-4 libkrb5-3_1.21.3-3 libkrb5support0_1.21.3-3 libldap-2.5-0_2.5.18+dfsg-3+b1 liblist-compare-perl_0.55-2 liblist-someutils-perl_0.59-1 liblist-utilsby-perl_0.12-2 liblsan0_14.2.0-8 libltdl-dev_2.4.7-8 libltdl7_2.4.7-8 liblwp-mediatypes-perl_6.04-2 liblwp-protocol-https-perl_6.14-1 liblz1_1.15~pre2-1 liblz4-1_1.9.4-3+b1 liblzma5_5.6.3-1+b1 liblzo2-2_2.10-3+b1 libmagic-mgc_1:5.45-3+b1 libmagic1t64_1:5.45-3+b1 libmarkdown2_2.2.7-2.1 libmd0_1.1.0-2+b1 libmldbm-perl_2.05-4 libmodule-implementation-perl_0.09-2 libmodule-runtime-perl_0.016-2 libmoo-perl_2.005005-1 libmoox-aliases-perl_0.001006-2 libmount1_2.40.2-11 libmouse-perl_2.5.11-1+b1 libmpc3_1.3.1-1+b3 libmpfr6_4.2.1-1+b2 libnamespace-clean-perl_0.27-2 libnet-domain-tld-perl_1.75-4 libnet-http-perl_6.23-1 libnet-ipv6addr-perl_1.02-1 libnet-netmask-perl_2.0002-2 libnet-ssleay-perl_1.94-2 libnetaddr-ip-perl_4.079+dfsg-2+b4 libnettle8t64_3.10-1+b1 libnghttp2-14_1.64.0-1 libnghttp3-9_1.4.0-1+b1 libngtcp2-16_1.6.0-1 libngtcp2-crypto-gnutls8_1.6.0-1 libnumber-compare-perl_0.03-3 libp11-kit0_0.25.5-2+b1 libpackage-stash-perl_0.40-1 libpam-modules_1.5.3-7+b1 libpam-modules-bin_1.5.3-7+b1 libpam-runtime_1.5.3-7 libpam0g_1.5.3-7+b1 libparams-classify-perl_0.015-2+b4 libparams-util-perl_1.102-3+b1 libpath-tiny-perl_0.146-1 libpcre2-8-0_10.44-4 libperl5.40_5.40.0-7 libperlio-gzip-perl_0.20-1+b4 libperlio-utf8-strict-perl_0.010-1+b3 libpipeline1_1.5.8-1 libproc-processtable-perl_0.636-1+b3 libpsl5t64_0.21.2-1.1+b1 libreadline8t64_8.2-5 libregexp-wildcards-perl_1.05-3 librole-tiny-perl_2.002004-1 librtmp1_2.4+20151223.gitfa8646d.1-2+b5 libsasl2-2_2.1.28+dfsg1-8 libsasl2-modules-db_2.1.28+dfsg1-8 libseccomp2_2.5.5-1+b3 libselinux1_3.7-3+b1 libsemanage-common_3.7-2 libsemanage2_3.7-2+b1 libsepol2_3.7-1 libsereal-decoder-perl_5.004+ds-1+b3 libsereal-encoder-perl_5.004+ds-1+b3 libsframe1_2.43.1-5 libsmartcols1_2.40.2-11 libsort-versions-perl_1.62-3 libsqlite3-0_3.46.1-1 libss2_1.47.1-1+b1 libssh2-1t64_1.11.1-1 libssl3t64_3.3.2-2 libstdc++-14-dev_14.2.0-8 libstdc++6_14.2.0-8 libstemmer0d_2.2.0-4+b2 libstrictures-perl_2.000006-1 libsub-exporter-perl_0.990-1 libsub-exporter-progressive-perl_0.001013-3 libsub-identify-perl_0.14-3+b3 libsub-install-perl_0.929-1 libsub-name-perl_0.27-1+b3 libsub-quote-perl_2.006008-1 libsyntax-keyword-try-perl_0.30-1+b1 libsystemd0_257~rc2-3 libtasn1-6_4.19.0-3+b3 libtcl8.6_8.6.15+dfsg-2 libterm-readkey-perl_2.38-2+b4 libtext-glob-perl_0.11-3 libtext-levenshteinxs-perl_0.03-5+b4 libtext-markdown-discount-perl_0.16-1+b3 libtext-unidecode-perl_1.30-3 libtext-xslate-perl_3.5.9-2+b1 libtime-duration-perl_1.21-2 libtime-moment-perl_0.44-2+b4 libtimedate-perl_2.3300-2 libtinfo6_6.5-2+b1 libtool_2.4.7-8 libtry-tiny-perl_0.32-1 libtsan2_14.2.0-8 libubsan1_14.2.0-8 libuchardet0_0.0.8-1+b2 libudev1_257~rc2-3 libunicode-utf8-perl_0.62-2+b3 libunistring5_1.2-1+b1 liburi-perl_5.30-1 libuuid1_2.40.2-11 libvariable-magic-perl_0.64-1+b1 libwww-mechanize-perl_2.19-1 libwww-perl_6.77-1 libwww-robotrules-perl_6.02-1 libxml-libxml-perl_2.0207+dfsg+really+2.0134-5+b1 libxml-namespacesupport-perl_1.12-2 libxml-sax-base-perl_1.09-3 libxml-sax-perl_1.02+dfsg-3 libxml2_2.12.7+dfsg+really2.9.14-0.2+b1 libxmlb2_0.3.21-1 libxs-parse-keyword-perl_0.46-1+b1 libxxhash0_0.8.2-2+b2 libyaml-0-2_0.2.5-1+b2 libyaml-libyaml-perl_0.902.0+ds-2+b1 libzstd1_1.5.6+dfsg-1+b1 lintian_2.120.0 linux-libc-dev_6.11.7-1 login_1:4.16.0-2+really2.40.2-11 login.defs_1:4.16.0-5 logsave_1.47.1-1+b1 lzop_1.04-2+b1 m4_1.4.19-4 make_4.3-4.1+b1 man-db_2.13.0-1 mawk_1.3.4.20240905-1 mount_2.40.2-11 ncurses-base_6.5-2 ncurses-bin_6.5-2+b1 netbase_6.4 openssl_3.3.2-2 openssl-provider-legacy_3.3.2-2 passwd_1:4.16.0-5 patch_2.7.6-7+b1 patchutils_0.4.2-1+b1 perl_5.40.0-7 perl-base_5.40.0-7 perl-modules-5.40_5.40.0-7 perl-openssl-defaults_7+b2 plzip_1.11-2 po-debconf_1.0.21+nmu1 readline-common_8.2-5 rpcsvc-proto_1.4.3-1+b1 sbuild-build-depends-main-dummy_0.invalid.0 sed_4.9-2+b1 sensible-utils_0.0.24 sgml-base_1.31 shared-mime-info_2.4-5+b1 sysvinit-utils_3.11-1 t1utils_1.41-4+b1 tar_1.35+dfsg-3+b1 tcl-expect_5.45.4-3+b1 tcl8.6_8.6.15+dfsg-2 tex-common_6.18 texinfo_7.1.1-1 texinfo-lib_7.1.1-1+b1 tzdata_2024b-3 ucf_3.0043+nmu1 unzip_6.0-28+b1 util-linux_2.40.2-11 xz-utils_5.6.3-1+b1 zlib1g_1:1.3.dfsg+really1.3.1-1+b1
+------------------------------------------------------------------------------+
| Build |
+------------------------------------------------------------------------------+
Unpack source
-------------
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA512
Format: 3.0 (quilt)
Source: libffi
Binary: libffi-dev, libffi8, libffi8-udeb
Architecture: any
Version: 3.4.6-1
Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>
Uploaders: Matthias Klose <doko@debian.org>
Homepage: https://sourceware.org/libffi/
Standards-Version: 4.6.2
Build-Depends: debhelper (>= 11), libltdl-dev, dejagnu, texinfo
Package-List:
libffi-dev deb libdevel optional arch=any
libffi8 deb libs optional arch=any
libffi8-udeb udeb debian-installer optional arch=any profile=!noudeb
Checksums-Sha1:
5bee9227b8559f4152a2da2c085c7452c3e657f7 598175 libffi_3.4.6.orig.tar.gz
45f739f5147280d096259f9104e3339bb66d5599 10636 libffi_3.4.6-1.debian.tar.xz
Checksums-Sha256:
9ac790464c1eb2f5ab5809e978a1683e9393131aede72d1b0a0703771d3c6cda 598175 libffi_3.4.6.orig.tar.gz
7126c310b616e9c4c8fdd50bd857f54379d26897ab55383a25e89b6cbd69729c 10636 libffi_3.4.6-1.debian.tar.xz
Files:
449a55540ac2214fe7619c73d350c983 598175 libffi_3.4.6.orig.tar.gz
0b2fe44ed6a6e3040115d0ee54c3cd18 10636 libffi_3.4.6-1.debian.tar.xz
-----BEGIN PGP SIGNATURE-----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=JbJ7
-----END PGP SIGNATURE-----
gpgv: Signature made Wed Feb 21 22:37:40 2024 UTC
gpgv: using RSA key D56571B88A8BBAF140BF63D6BD7EAA60778FA6F5
gpgv: issuer "doko@debian.org"
gpgv: Can't check signature: No public key
dpkg-source: warning: cannot verify inline signature for ./libffi_3.4.6-1.dsc: no acceptable signature found
dpkg-source: info: extracting libffi in /<<PKGBUILDDIR>>
dpkg-source: info: unpacking libffi_3.4.6.orig.tar.gz
dpkg-source: info: unpacking libffi_3.4.6-1.debian.tar.xz
dpkg-source: info: using patch list from debian/patches/series
dpkg-source: info: applying no-toolexeclibdir.diff
Check disk space
----------------
Sufficient free space for build
User Environment
----------------
APT_CONFIG=/var/lib/sbuild/apt.conf
HOME=/sbuild-nonexistent
LANG=en_US.UTF-8
LC_ALL=C.UTF-8
LOGNAME=debusine-worker
PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games
SHELL=/bin/sh
USER=debusine-worker
dpkg-buildpackage
-----------------
Command: dpkg-buildpackage -us -uc -b -rfakeroot
dpkg-buildpackage: info: source package libffi
dpkg-buildpackage: info: source version 3.4.6-1
dpkg-buildpackage: info: source distribution unstable
dpkg-buildpackage: info: source changed by Matthias Klose <doko@debian.org>
dpkg-source --before-build .
dpkg-buildpackage: info: host architecture arm64
debian/rules clean
dh_testdir
dh_testroot
rm -f stamp-*
rm -rf build*
rm -f doc/libffi.info
dh_autoreconf_clean
dh_clean
debian/rules binary
env | grep PROFILE
make: [debian/rules:43: stamp-configure] Error 1 (ignored)
dh_testdir
dh_autoreconf
libtoolize: putting auxiliary files in '.'.
libtoolize: copying file './ltmain.sh'
libtoolize: putting macros in AC_CONFIG_MACRO_DIRS, 'm4'.
libtoolize: copying file 'm4/libtool.m4'
libtoolize: copying file 'm4/ltoptions.m4'
libtoolize: copying file 'm4/ltsugar.m4'
libtoolize: copying file 'm4/ltversion.m4'
libtoolize: copying file 'm4/lt~obsolete.m4'
configure.ac:88: warning: The preprocessor macro `STDC_HEADERS' is obsolete.
configure.ac:88: Except in unusual embedded environments, you can safely include all
configure.ac:88: ISO C90 headers unconditionally.
configure.ac:123: warning: The macro 'AC_TRY_COMPILE' is obsolete.
configure.ac:123: You should run autoupdate.
./lib/autoconf/general.m4:2845: AC_TRY_COMPILE is expanded from...
lib/m4sugar/m4sh.m4:690: _AS_IF_ELSE is expanded from...
lib/m4sugar/m4sh.m4:697: AS_IF is expanded from...
./lib/autoconf/general.m4:2249: AC_CACHE_VAL is expanded from...
./lib/autoconf/general.m4:2270: AC_CACHE_CHECK is expanded from...
m4/asmcfi.m4:1: GCC_AS_CFI_PSEUDO_OP is expanded from...
configure.ac:123: the top level
configure.ac:31: installing './compile'
configure.ac:19: installing './install-sh'
configure.ac:19: installing './missing'
Makefile.am: installing './depcomp'
doc/Makefile.am:3: installing 'doc/mdate-sh'
doc/Makefile.am:3: installing 'doc/texinfo.tex'
rm -rf build
mkdir -p build
cd build && ../configure \
--host=aarch64-linux-gnu \
--build=aarch64-linux-gnu \
--prefix=/usr \
--mandir=\${prefix}/share/man \
--infodir=\${prefix}/share/info \
--enable-pax_emutramp \
--disable-exec-static-tramp \
--without-gcc-arch \
CC="aarch64-linux-gnu-gcc" \
CXX="aarch64-linux-gnu-g++" \
CPPFLAGS="-Wdate-time -D_FORTIFY_SOURCE=2" \
CFLAGS="-g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard" \
CCASFLAGS="-g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wa,--gdwarf-5" \
LDFLAGS="-Wl,-z,defs -Wl,-z,relro"
checking build system type... aarch64-unknown-linux-gnu
checking host system type... aarch64-unknown-linux-gnu
checking target system type... aarch64-unknown-linux-gnu
checking for gsed... sed
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a race-free mkdir -p... /usr/bin/mkdir -p
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking whether make supports nested variables... yes
checking for aarch64-linux-gnu-gcc... aarch64-linux-gnu-gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether the compiler supports GNU C... yes
checking whether aarch64-linux-gnu-gcc accepts -g... yes
checking for aarch64-linux-gnu-gcc option to enable C11 features... none needed
checking whether aarch64-linux-gnu-gcc understands -c and -o together... yes
checking whether make supports the include directive... yes (GNU style)
checking dependency style of aarch64-linux-gnu-gcc... gcc3
checking whether the compiler supports GNU C++... yes
checking whether aarch64-linux-gnu-g++ accepts -g... yes
checking for aarch64-linux-gnu-g++ option to enable C++11 features... none needed
checking dependency style of aarch64-linux-gnu-g++... gcc3
checking dependency style of aarch64-linux-gnu-gcc... gcc3
checking for grep that handles long lines and -e... /usr/bin/grep
checking for egrep... /usr/bin/grep -E
checking how to print strings... printf
checking for a sed that does not truncate output... /usr/bin/sed
checking for fgrep... /usr/bin/grep -F
checking for ld used by aarch64-linux-gnu-gcc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... /usr/bin/aarch64-linux-gnu-nm -B
checking the name lister (/usr/bin/aarch64-linux-gnu-nm -B) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 1572864
checking how to convert aarch64-unknown-linux-gnu file names to aarch64-unknown-linux-gnu format... func_convert_file_noop
checking how to convert aarch64-unknown-linux-gnu file names to toolchain format... func_convert_file_noop
checking for /usr/bin/ld option to reload object files... -r
checking for aarch64-linux-gnu-file... no
checking for file... file
checking for aarch64-linux-gnu-objdump... aarch64-linux-gnu-objdump
checking how to recognize dependent libraries... pass_all
checking for aarch64-linux-gnu-dlltool... no
checking for dlltool... no
checking how to associate runtime and link libraries... printf %s\n
checking for aarch64-linux-gnu-ar... aarch64-linux-gnu-ar
checking for archiver @FILE support... @
checking for aarch64-linux-gnu-strip... aarch64-linux-gnu-strip
checking for aarch64-linux-gnu-ranlib... aarch64-linux-gnu-ranlib
checking command to parse /usr/bin/aarch64-linux-gnu-nm -B output from aarch64-linux-gnu-gcc object... ok
checking for sysroot... no
checking for a working dd... /usr/bin/dd
checking how to truncate binary pipes... /usr/bin/dd bs=4096 count=1
checking for aarch64-linux-gnu-mt... no
checking for mt... no
checking if : is a manifest tool... no
checking for stdio.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for strings.h... yes
checking for sys/stat.h... yes
checking for sys/types.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if aarch64-linux-gnu-gcc supports -fno-rtti -fno-exceptions... no
checking for aarch64-linux-gnu-gcc option to produce PIC... -fPIC -DPIC
checking if aarch64-linux-gnu-gcc PIC flag -fPIC -DPIC works... yes
checking if aarch64-linux-gnu-gcc static flag -static works... yes
checking if aarch64-linux-gnu-gcc supports -c -o file.o... yes
checking if aarch64-linux-gnu-gcc supports -c -o file.o... (cached) yes
checking whether the aarch64-linux-gnu-gcc linker (/usr/bin/ld) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking how to run the C++ preprocessor... aarch64-linux-gnu-g++ -E
checking for ld used by aarch64-linux-gnu-g++... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking whether the aarch64-linux-gnu-g++ linker (/usr/bin/ld) supports shared libraries... yes
checking for aarch64-linux-gnu-g++ option to produce PIC... -fPIC -DPIC
checking if aarch64-linux-gnu-g++ PIC flag -fPIC -DPIC works... yes
checking if aarch64-linux-gnu-g++ static flag -static works... yes
checking if aarch64-linux-gnu-g++ supports -c -o file.o... yes
checking if aarch64-linux-gnu-g++ supports -c -o file.o... (cached) yes
checking whether the aarch64-linux-gnu-g++ linker (/usr/bin/ld) supports shared libraries... yes
checking dynamic linker characteristics... (cached) GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking for aarch64-linux-gnu-readelf... aarch64-linux-gnu-readelf
checking size of size_t... 8
checking for C compiler vendor... gnu
checking CFLAGS for most reasonable warnings... -Wall
checking whether to enable maintainer-specific portions of Makefiles... no
checking for sys/memfd.h... no
checking for memfd_create... yes
checking for egrep... (cached) /usr/bin/grep -E
checking for memcpy... yes
checking for alloca.h... yes
checking size of double... 8
checking size of long double... 16
checking whether byte ordering is bigendian... no
checking assembler .cfi pseudo-op support... yes
checking whether compiler supports pointer authentication... no
configure: WARNING: EMUTRAMP is experimental only. Use --enable-pax_emutramp=experimental to enforce.
checking for _ prefix in compiled symbols... no
checking whether C compiler accepts -fno-lto... yes
checking whether .eh_frame section should be read-only... yes
checking for __attribute__((visibility("hidden")))... yes
checking for shared libgcc... yes
configure: versioning on shared library symbols is gnu
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating include/Makefile
config.status: creating include/ffi.h
config.status: creating Makefile
config.status: creating testsuite/Makefile
config.status: creating man/Makefile
config.status: creating doc/Makefile
config.status: creating libffi.pc
config.status: creating fficonfig.h
config.status: executing buildir commands
config.status: skipping top_srcdir/Makefile - not created
config.status: executing depfiles commands
config.status: executing libtool commands
config.status: executing include commands
config.status: executing src commands
touch stamp-configure
dh_testdir
/usr/bin/make -C build
make[1]: Entering directory '/<<PKGBUILDDIR>>/build'
/usr/bin/make all-recursive
make[2]: Entering directory '/<<PKGBUILDDIR>>/build'
Making all in include
make[3]: Entering directory '/<<PKGBUILDDIR>>/build/include'
make[3]: Nothing to be done for 'all'.
make[3]: Leaving directory '/<<PKGBUILDDIR>>/build/include'
Making all in testsuite
make[3]: Entering directory '/<<PKGBUILDDIR>>/build/testsuite'
make[3]: Nothing to be done for 'all'.
make[3]: Leaving directory '/<<PKGBUILDDIR>>/build/testsuite'
Making all in man
make[3]: Entering directory '/<<PKGBUILDDIR>>/build/man'
make[3]: Nothing to be done for 'all'.
make[3]: Leaving directory '/<<PKGBUILDDIR>>/build/man'
Making all in doc
make[3]: Entering directory '/<<PKGBUILDDIR>>/build/doc'
restore=: && backupdir=".am$$" && \
am__cwd=`pwd` && CDPATH="${ZSH_VERSION+.}:" && cd ../../doc && \
rm -rf $backupdir && mkdir $backupdir && \
if (/bin/bash '/<<PKGBUILDDIR>>/missing' makeinfo --version) >/dev/null 2>&1; then \
for f in ../../doc/libffi.info ../../doc/libffi.info-[0-9] ../../doc/libffi.info-[0-9][0-9] ../../doc/libffi.i[0-9] ../../doc/libffi.i[0-9][0-9]; do \
if test -f $f; then mv $f $backupdir; restore=mv; else :; fi; \
done; \
else :; fi && \
cd "$am__cwd"; \
if /bin/bash '/<<PKGBUILDDIR>>/missing' makeinfo -I ../../doc \
-o ../../doc/libffi.info ../../doc/libffi.texi; \
then \
rc=0; \
CDPATH="${ZSH_VERSION+.}:" && cd ../../doc; \
else \
rc=$?; \
CDPATH="${ZSH_VERSION+.}:" && cd ../../doc && \
$restore $backupdir/* `echo "./../../doc/libffi.info" | sed 's|[^/]*$||'`; \
fi; \
rm -rf $backupdir; exit $rc
make[3]: Leaving directory '/<<PKGBUILDDIR>>/build/doc'
make[3]: Entering directory '/<<PKGBUILDDIR>>/build'
depbase=`echo src/prep_cif.lo | sed 's|[^/]*$|.deps/&|;s|\.lo$||'`;\
/bin/bash ./libtool --tag=CC --mode=compile aarch64-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I.. -I. -I../include -Iinclude -I../src -Wdate-time -D_FORTIFY_SOURCE=2 -Wall -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -fexceptions -MT src/prep_cif.lo -MD -MP -MF $depbase.Tpo -c -o src/prep_cif.lo ../src/prep_cif.c &&\
mv -f $depbase.Tpo $depbase.Plo
libtool: compile: aarch64-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I.. -I. -I../include -Iinclude -I../src -Wdate-time -D_FORTIFY_SOURCE=2 -Wall -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -fexceptions -MT src/prep_cif.lo -MD -MP -MF src/.deps/prep_cif.Tpo -c ../src/prep_cif.c -fPIC -DPIC -o src/.libs/prep_cif.o
libtool: compile: aarch64-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I.. -I. -I../include -Iinclude -I../src -Wdate-time -D_FORTIFY_SOURCE=2 -Wall -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -fexceptions -MT src/prep_cif.lo -MD -MP -MF src/.deps/prep_cif.Tpo -c ../src/prep_cif.c -o src/prep_cif.o >/dev/null 2>&1
depbase=`echo src/types.lo | sed 's|[^/]*$|.deps/&|;s|\.lo$||'`;\
/bin/bash ./libtool --tag=CC --mode=compile aarch64-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I.. -I. -I../include -Iinclude -I../src -Wdate-time -D_FORTIFY_SOURCE=2 -Wall -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -fexceptions -MT src/types.lo -MD -MP -MF $depbase.Tpo -c -o src/types.lo ../src/types.c &&\
mv -f $depbase.Tpo $depbase.Plo
libtool: compile: aarch64-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I.. -I. -I../include -Iinclude -I../src -Wdate-time -D_FORTIFY_SOURCE=2 -Wall -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -fexceptions -MT src/types.lo -MD -MP -MF src/.deps/types.Tpo -c ../src/types.c -fPIC -DPIC -o src/.libs/types.o
libtool: compile: aarch64-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I.. -I. -I../include -Iinclude -I../src -Wdate-time -D_FORTIFY_SOURCE=2 -Wall -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -fexceptions -MT src/types.lo -MD -MP -MF src/.deps/types.Tpo -c ../src/types.c -o src/types.o >/dev/null 2>&1
depbase=`echo src/raw_api.lo | sed 's|[^/]*$|.deps/&|;s|\.lo$||'`;\
/bin/bash ./libtool --tag=CC --mode=compile aarch64-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I.. -I. -I../include -Iinclude -I../src -Wdate-time -D_FORTIFY_SOURCE=2 -Wall -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -fexceptions -MT src/raw_api.lo -MD -MP -MF $depbase.Tpo -c -o src/raw_api.lo ../src/raw_api.c &&\
mv -f $depbase.Tpo $depbase.Plo
libtool: compile: aarch64-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I.. -I. -I../include -Iinclude -I../src -Wdate-time -D_FORTIFY_SOURCE=2 -Wall -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -fexceptions -MT src/raw_api.lo -MD -MP -MF src/.deps/raw_api.Tpo -c ../src/raw_api.c -fPIC -DPIC -o src/.libs/raw_api.o
libtool: compile: aarch64-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I.. -I. -I../include -Iinclude -I../src -Wdate-time -D_FORTIFY_SOURCE=2 -Wall -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -fexceptions -MT src/raw_api.lo -MD -MP -MF src/.deps/raw_api.Tpo -c ../src/raw_api.c -o src/raw_api.o >/dev/null 2>&1
depbase=`echo src/java_raw_api.lo | sed 's|[^/]*$|.deps/&|;s|\.lo$||'`;\
/bin/bash ./libtool --tag=CC --mode=compile aarch64-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I.. -I. -I../include -Iinclude -I../src -Wdate-time -D_FORTIFY_SOURCE=2 -Wall -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -fexceptions -MT src/java_raw_api.lo -MD -MP -MF $depbase.Tpo -c -o src/java_raw_api.lo ../src/java_raw_api.c &&\
mv -f $depbase.Tpo $depbase.Plo
libtool: compile: aarch64-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I.. -I. -I../include -Iinclude -I../src -Wdate-time -D_FORTIFY_SOURCE=2 -Wall -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -fexceptions -MT src/java_raw_api.lo -MD -MP -MF src/.deps/java_raw_api.Tpo -c ../src/java_raw_api.c -fPIC -DPIC -o src/.libs/java_raw_api.o
../src/java_raw_api.c: In function ‘ffi_java_raw_call’:
../src/java_raw_api.c:317:3: warning: ‘ffi_java_raw_to_ptrarray’ is deprecated [-Wdeprecated-declarations]
317 | ffi_java_raw_to_ptrarray (cif, raw, avalue);
| ^~~~~~~~~~~~~~~~~~~~~~~~
../src/java_raw_api.c:76:1: note: declared here
76 | ffi_java_raw_to_ptrarray (ffi_cif *cif, ffi_java_raw *raw, void **args)
| ^~~~~~~~~~~~~~~~~~~~~~~~
../src/java_raw_api.c: In function ‘ffi_java_translate_args’:
../src/java_raw_api.c:328:3: warning: ‘ffi_java_raw_size’ is deprecated [-Wdeprecated-declarations]
328 | ffi_java_raw *raw = (ffi_java_raw*)alloca (ffi_java_raw_size (cif));
| ^~~~~~~~~~~~
../src/java_raw_api.c:45:1: note: declared here
45 | ffi_java_raw_size (ffi_cif *cif)
| ^~~~~~~~~~~~~~~~~
../src/java_raw_api.c:331:3: warning: ‘ffi_java_ptrarray_to_raw’ is deprecated [-Wdeprecated-declarations]
331 | ffi_java_ptrarray_to_raw (cif, avalue, raw);
| ^~~~~~~~~~~~~~~~~~~~~~~~
../src/java_raw_api.c:157:1: note: declared here
157 | ffi_java_ptrarray_to_raw (ffi_cif *cif, void **args, ffi_java_raw *raw)
| ^~~~~~~~~~~~~~~~~~~~~~~~
../src/java_raw_api.c: In function ‘ffi_prep_java_raw_closure’:
../src/java_raw_api.c:369:3: warning: ‘ffi_prep_java_raw_closure_loc’ is deprecated [-Wdeprecated-declarations]
369 | return ffi_prep_java_raw_closure_loc (cl, cif, fun, user_data, cl);
| ^~~~~~
../src/java_raw_api.c:337:1: note: declared here
337 | ffi_prep_java_raw_closure_loc (ffi_java_raw_closure* cl,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
libtool: compile: aarch64-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I.. -I. -I../include -Iinclude -I../src -Wdate-time -D_FORTIFY_SOURCE=2 -Wall -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -fexceptions -MT src/java_raw_api.lo -MD -MP -MF src/.deps/java_raw_api.Tpo -c ../src/java_raw_api.c -o src/java_raw_api.o >/dev/null 2>&1
depbase=`echo src/closures.lo | sed 's|[^/]*$|.deps/&|;s|\.lo$||'`;\
/bin/bash ./libtool --tag=CC --mode=compile aarch64-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I.. -I. -I../include -Iinclude -I../src -Wdate-time -D_FORTIFY_SOURCE=2 -Wall -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -fexceptions -MT src/closures.lo -MD -MP -MF $depbase.Tpo -c -o src/closures.lo ../src/closures.c &&\
mv -f $depbase.Tpo $depbase.Plo
libtool: compile: aarch64-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I.. -I. -I../include -Iinclude -I../src -Wdate-time -D_FORTIFY_SOURCE=2 -Wall -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -fexceptions -MT src/closures.lo -MD -MP -MF src/.deps/closures.Tpo -c ../src/closures.c -fPIC -DPIC -o src/.libs/closures.o
libtool: compile: aarch64-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I.. -I. -I../include -Iinclude -I../src -Wdate-time -D_FORTIFY_SOURCE=2 -Wall -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -fexceptions -MT src/closures.lo -MD -MP -MF src/.deps/closures.Tpo -c ../src/closures.c -o src/closures.o >/dev/null 2>&1
depbase=`echo src/tramp.lo | sed 's|[^/]*$|.deps/&|;s|\.lo$||'`;\
/bin/bash ./libtool --tag=CC --mode=compile aarch64-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I.. -I. -I../include -Iinclude -I../src -Wdate-time -D_FORTIFY_SOURCE=2 -Wall -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -fexceptions -MT src/tramp.lo -MD -MP -MF $depbase.Tpo -c -o src/tramp.lo ../src/tramp.c &&\
mv -f $depbase.Tpo $depbase.Plo
libtool: compile: aarch64-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I.. -I. -I../include -Iinclude -I../src -Wdate-time -D_FORTIFY_SOURCE=2 -Wall -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -fexceptions -MT src/tramp.lo -MD -MP -MF src/.deps/tramp.Tpo -c ../src/tramp.c -fPIC -DPIC -o src/.libs/tramp.o
libtool: compile: aarch64-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I.. -I. -I../include -Iinclude -I../src -Wdate-time -D_FORTIFY_SOURCE=2 -Wall -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -fexceptions -MT src/tramp.lo -MD -MP -MF src/.deps/tramp.Tpo -c ../src/tramp.c -o src/tramp.o >/dev/null 2>&1
depbase=`echo src/aarch64/ffi.lo | sed 's|[^/]*$|.deps/&|;s|\.lo$||'`;\
/bin/bash ./libtool --tag=CC --mode=compile aarch64-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I.. -I. -I../include -Iinclude -I../src -Wdate-time -D_FORTIFY_SOURCE=2 -Wall -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -fexceptions -MT src/aarch64/ffi.lo -MD -MP -MF $depbase.Tpo -c -o src/aarch64/ffi.lo ../src/aarch64/ffi.c &&\
mv -f $depbase.Tpo $depbase.Plo
libtool: compile: aarch64-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I.. -I. -I../include -Iinclude -I../src -Wdate-time -D_FORTIFY_SOURCE=2 -Wall -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -fexceptions -MT src/aarch64/ffi.lo -MD -MP -MF src/aarch64/.deps/ffi.Tpo -c ../src/aarch64/ffi.c -fPIC -DPIC -o src/aarch64/.libs/ffi.o
libtool: compile: aarch64-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I.. -I. -I../include -Iinclude -I../src -Wdate-time -D_FORTIFY_SOURCE=2 -Wall -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -fexceptions -MT src/aarch64/ffi.lo -MD -MP -MF src/aarch64/.deps/ffi.Tpo -c ../src/aarch64/ffi.c -o src/aarch64/ffi.o >/dev/null 2>&1
depbase=`echo src/aarch64/sysv.lo | sed 's|[^/]*$|.deps/&|;s|\.lo$||'`;\
/bin/bash ./libtool --tag=CC --mode=compile aarch64-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I.. -I. -I../include -Iinclude -I../src -Wdate-time -D_FORTIFY_SOURCE=2 -I. -I../include -Iinclude -I../src -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wa,--gdwarf-5 -MT src/aarch64/sysv.lo -MD -MP -MF $depbase.Tpo -c -o src/aarch64/sysv.lo ../src/aarch64/sysv.S &&\
mv -f $depbase.Tpo $depbase.Plo
libtool: compile: aarch64-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I.. -I. -I../include -Iinclude -I../src -Wdate-time -D_FORTIFY_SOURCE=2 -I. -I../include -Iinclude -I../src -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wa,--gdwarf-5 -MT src/aarch64/sysv.lo -MD -MP -MF src/aarch64/.deps/sysv.Tpo -c ../src/aarch64/sysv.S -fPIC -DPIC -o src/aarch64/.libs/sysv.o
libtool: compile: aarch64-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I.. -I. -I../include -Iinclude -I../src -Wdate-time -D_FORTIFY_SOURCE=2 -I. -I../include -Iinclude -I../src -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wa,--gdwarf-5 -MT src/aarch64/sysv.lo -MD -MP -MF src/aarch64/.deps/sysv.Tpo -c ../src/aarch64/sysv.S -o src/aarch64/sysv.o >/dev/null 2>&1
aarch64-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I.. -I. -I../include -Iinclude -I../src -Wdate-time -D_FORTIFY_SOURCE=2 -Wall -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -fexceptions -DAARCH64 -DGENERATE_LIBFFI_MAP \
-E -x assembler-with-cpp -o libffi.map ../libffi.map.in
/bin/bash ./libtool --tag=CC --mode=link aarch64-linux-gnu-gcc -Wall -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -fexceptions -Wl,-z,defs -Wl,-z,relro -o libffi_convenience.la src/prep_cif.lo src/types.lo src/raw_api.lo src/java_raw_api.lo src/closures.lo src/tramp.lo src/aarch64/ffi.lo src/aarch64/sysv.lo
libtool: link: aarch64-linux-gnu-ar cr .libs/libffi_convenience.a src/.libs/prep_cif.o src/.libs/types.o src/.libs/raw_api.o src/.libs/java_raw_api.o src/.libs/closures.o src/.libs/tramp.o src/aarch64/.libs/ffi.o src/aarch64/.libs/sysv.o
libtool: link: aarch64-linux-gnu-ranlib .libs/libffi_convenience.a
libtool: link: ( cd ".libs" && rm -f "libffi_convenience.la" && ln -s "../libffi_convenience.la" "libffi_convenience.la" )
/bin/bash ./libtool --tag=CC --mode=link aarch64-linux-gnu-gcc -Wall -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -fexceptions -no-undefined -version-info `grep -v '^#' ../libtool-version` -Wl,--version-script,libffi.map '-Wl,-z,defs' '-Wl,-z,relro' -Wl,-z,defs -Wl,-z,relro -o libffi.la -rpath /usr/lib/../lib src/prep_cif.lo src/types.lo src/raw_api.lo src/java_raw_api.lo src/closures.lo src/tramp.lo src/aarch64/ffi.lo src/aarch64/sysv.lo
libtool: link: aarch64-linux-gnu-gcc -shared -fPIC -DPIC src/.libs/prep_cif.o src/.libs/types.o src/.libs/raw_api.o src/.libs/java_raw_api.o src/.libs/closures.o src/.libs/tramp.o src/aarch64/.libs/ffi.o src/aarch64/.libs/sysv.o -g -O2 -fstack-protector-strong -mbranch-protection=standard -Wl,--version-script -Wl,libffi.map -Wl,-z -Wl,defs -Wl,-z -Wl,relro -Wl,-z -Wl,defs -Wl,-z -Wl,relro -Wl,-soname -Wl,libffi.so.8 -o .libs/libffi.so.8.1.4
libtool: link: (cd ".libs" && rm -f "libffi.so.8" && ln -s "libffi.so.8.1.4" "libffi.so.8")
libtool: link: (cd ".libs" && rm -f "libffi.so" && ln -s "libffi.so.8.1.4" "libffi.so")
libtool: link: aarch64-linux-gnu-ar cr .libs/libffi.a src/prep_cif.o src/types.o src/raw_api.o src/java_raw_api.o src/closures.o src/tramp.o src/aarch64/ffi.o src/aarch64/sysv.o
libtool: link: aarch64-linux-gnu-ranlib .libs/libffi.a
libtool: link: ( cd ".libs" && rm -f "libffi.la" && ln -s "../libffi.la" "libffi.la" )
make[3]: Leaving directory '/<<PKGBUILDDIR>>/build'
make[2]: Leaving directory '/<<PKGBUILDDIR>>/build'
make[1]: Leaving directory '/<<PKGBUILDDIR>>/build'
/usr/bin/make -C build html
make[1]: Entering directory '/<<PKGBUILDDIR>>/build'
Making html in include
make[2]: Entering directory '/<<PKGBUILDDIR>>/build/include'
make[2]: Nothing to be done for 'html'.
make[2]: Leaving directory '/<<PKGBUILDDIR>>/build/include'
Making html in testsuite
make[2]: Entering directory '/<<PKGBUILDDIR>>/build/testsuite'
make[2]: Nothing to be done for 'html'.
make[2]: Leaving directory '/<<PKGBUILDDIR>>/build/testsuite'
Making html in man
make[2]: Entering directory '/<<PKGBUILDDIR>>/build/man'
make[2]: Nothing to be done for 'html'.
make[2]: Leaving directory '/<<PKGBUILDDIR>>/build/man'
Making html in doc
make[2]: Entering directory '/<<PKGBUILDDIR>>/build/doc'
rm -rf libffi.htp
if /bin/bash '/<<PKGBUILDDIR>>/missing' makeinfo --html -I ../../doc \
-o libffi.htp ../../doc/libffi.texi; \
then \
rm -rf libffi.html && mv libffi.htp libffi.html; \
else \
rm -rf libffi.htp; exit 1; \
fi
make[2]: Leaving directory '/<<PKGBUILDDIR>>/build/doc'
make[2]: Entering directory '/<<PKGBUILDDIR>>/build'
make[2]: Nothing to be done for 'html-am'.
make[2]: Leaving directory '/<<PKGBUILDDIR>>/build'
make[1]: Leaving directory '/<<PKGBUILDDIR>>/build'
touch stamp-build
dh_testdir
/usr/bin/make -C build check 2>&1 | tee build/check.log
make[1]: Entering directory '/<<PKGBUILDDIR>>/build'
Making check in include
make[2]: Entering directory '/<<PKGBUILDDIR>>/build/include'
make[2]: Nothing to be done for 'check'.
make[2]: Leaving directory '/<<PKGBUILDDIR>>/build/include'
Making check in testsuite
make[2]: Entering directory '/<<PKGBUILDDIR>>/build/testsuite'
/usr/bin/make check-DEJAGNU
make[3]: Entering directory '/<<PKGBUILDDIR>>/build/testsuite'
Making a new site.exp file ...
srcdir='../../testsuite'; export srcdir; \
EXPECT=expect; export EXPECT; \
if /bin/bash -c "runtest --version" > /dev/null 2>&1; then \
exit_status=0; l='libffi'; for tool in $l; do \
if runtest --tool $tool --srcdir $srcdir ; \
then :; else exit_status=1; fi; \
done; \
else echo "WARNING: could not find 'runtest'" 1>&2; :;\
fi; \
exit $exit_status
Using ../../testsuite/lib/libffi.exp as tool init file.
Test run by debusine-worker on Sun Nov 17 00:04:27 2024
Native configuration is aarch64-unknown-linux-gnu
=== libffi tests ===
Schedule of variations:
unix
Running target unix
Using /usr/share/dejagnu/baseboards/unix.exp as board description file for target.
Using /usr/share/dejagnu/config/unix.exp as generic interface file for target.
Using ../../testsuite/config/default.exp as tool-and-target-specific interface file.
Running ../../testsuite/libffi.bhaible/bhaible.exp ...
Running ../../testsuite/libffi.call/call.exp ...
Running ../../testsuite/libffi.closures/closure.exp ...
Running ../../testsuite/libffi.complex/complex.exp ...
Running ../../testsuite/libffi.go/go.exp ...
=== libffi Summary ===
# of expected passes 1636
make[3]: Leaving directory '/<<PKGBUILDDIR>>/build/testsuite'
make[2]: Leaving directory '/<<PKGBUILDDIR>>/build/testsuite'
Making check in man
make[2]: Entering directory '/<<PKGBUILDDIR>>/build/man'
make[2]: Nothing to be done for 'check'.
make[2]: Leaving directory '/<<PKGBUILDDIR>>/build/man'
Making check in doc
make[2]: Entering directory '/<<PKGBUILDDIR>>/build/doc'
make[2]: Nothing to be done for 'check'.
make[2]: Leaving directory '/<<PKGBUILDDIR>>/build/doc'
make[2]: Entering directory '/<<PKGBUILDDIR>>/build'
make[2]: Leaving directory '/<<PKGBUILDDIR>>/build'
make[1]: Leaving directory '/<<PKGBUILDDIR>>/build'
touch stamp-check
dh_testdir
dh_testroot
dh_prep
dh_installdirs -a
/usr/bin/make -C build DESTDIR=/<<PKGBUILDDIR>>/debian/tmp install
make[1]: Entering directory '/<<PKGBUILDDIR>>/build'
Making install in include
make[2]: Entering directory '/<<PKGBUILDDIR>>/build/include'
make[3]: Entering directory '/<<PKGBUILDDIR>>/build/include'
make[3]: Nothing to be done for 'install-exec-am'.
/usr/bin/mkdir -p '/<<PKGBUILDDIR>>/debian/tmp/usr/include'
/usr/bin/install -c -m 644 ffi.h ffitarget.h '/<<PKGBUILDDIR>>/debian/tmp/usr/include'
make[3]: Leaving directory '/<<PKGBUILDDIR>>/build/include'
make[2]: Leaving directory '/<<PKGBUILDDIR>>/build/include'
Making install in testsuite
make[2]: Entering directory '/<<PKGBUILDDIR>>/build/testsuite'
make[3]: Entering directory '/<<PKGBUILDDIR>>/build/testsuite'
make[3]: Nothing to be done for 'install-exec-am'.
make[3]: Nothing to be done for 'install-data-am'.
make[3]: Leaving directory '/<<PKGBUILDDIR>>/build/testsuite'
make[2]: Leaving directory '/<<PKGBUILDDIR>>/build/testsuite'
Making install in man
make[2]: Entering directory '/<<PKGBUILDDIR>>/build/man'
make[3]: Entering directory '/<<PKGBUILDDIR>>/build/man'
make[3]: Nothing to be done for 'install-exec-am'.
/usr/bin/mkdir -p '/<<PKGBUILDDIR>>/debian/tmp/usr/share/man/man3'
/usr/bin/install -c -m 644 ../../man/ffi.3 ../../man/ffi_call.3 ../../man/ffi_prep_cif.3 ../../man/ffi_prep_cif_var.3 '/<<PKGBUILDDIR>>/debian/tmp/usr/share/man/man3'
make[3]: Leaving directory '/<<PKGBUILDDIR>>/build/man'
make[2]: Leaving directory '/<<PKGBUILDDIR>>/build/man'
Making install in doc
make[2]: Entering directory '/<<PKGBUILDDIR>>/build/doc'
make[3]: Entering directory '/<<PKGBUILDDIR>>/build/doc'
make[3]: Nothing to be done for 'install-exec-am'.
/usr/bin/mkdir -p '/<<PKGBUILDDIR>>/debian/tmp/usr/share/info'
/usr/bin/install -c -m 644 ../../doc/libffi.info '/<<PKGBUILDDIR>>/debian/tmp/usr/share/info'
make[3]: Leaving directory '/<<PKGBUILDDIR>>/build/doc'
make[2]: Leaving directory '/<<PKGBUILDDIR>>/build/doc'
make[2]: Entering directory '/<<PKGBUILDDIR>>/build'
make[3]: Entering directory '/<<PKGBUILDDIR>>/build'
/usr/bin/mkdir -p '/<<PKGBUILDDIR>>/debian/tmp/usr/lib/../lib'
/bin/bash ./libtool --mode=install /usr/bin/install -c libffi.la '/<<PKGBUILDDIR>>/debian/tmp/usr/lib/../lib'
libtool: install: /usr/bin/install -c .libs/libffi.so.8.1.4 /<<PKGBUILDDIR>>/debian/tmp/usr/lib/../lib/libffi.so.8.1.4
libtool: install: (cd /<<PKGBUILDDIR>>/debian/tmp/usr/lib/../lib && { ln -s -f libffi.so.8.1.4 libffi.so.8 || { rm -f libffi.so.8 && ln -s libffi.so.8.1.4 libffi.so.8; }; })
libtool: install: (cd /<<PKGBUILDDIR>>/debian/tmp/usr/lib/../lib && { ln -s -f libffi.so.8.1.4 libffi.so || { rm -f libffi.so && ln -s libffi.so.8.1.4 libffi.so; }; })
libtool: install: /usr/bin/install -c .libs/libffi.lai /<<PKGBUILDDIR>>/debian/tmp/usr/lib/../lib/libffi.la
libtool: install: /usr/bin/install -c .libs/libffi.a /<<PKGBUILDDIR>>/debian/tmp/usr/lib/../lib/libffi.a
libtool: install: chmod 644 /<<PKGBUILDDIR>>/debian/tmp/usr/lib/../lib/libffi.a
libtool: install: aarch64-linux-gnu-ranlib /<<PKGBUILDDIR>>/debian/tmp/usr/lib/../lib/libffi.a
libtool: warning: remember to run 'libtool --finish /usr/lib/../lib'
/usr/bin/mkdir -p '/<<PKGBUILDDIR>>/debian/tmp/usr/lib/pkgconfig'
/usr/bin/install -c -m 644 libffi.pc '/<<PKGBUILDDIR>>/debian/tmp/usr/lib/pkgconfig'
make[3]: Leaving directory '/<<PKGBUILDDIR>>/build'
make[2]: Leaving directory '/<<PKGBUILDDIR>>/build'
make[1]: Leaving directory '/<<PKGBUILDDIR>>/build'
mkdir -p debian/tmp/usr/lib/aarch64-linux-gnu
mv debian/tmp/usr/lib/* debian/tmp/usr/lib/aarch64-linux-gnu/.
mv: cannot move 'debian/tmp/usr/lib/aarch64-linux-gnu' to a subdirectory of itself, 'debian/tmp/usr/lib/aarch64-linux-gnu/./aarch64-linux-gnu'
make: [debian/rules:102: install] Error 1 (ignored)
cp -p build/.libs/libffi_convenience.a \
debian/tmp/usr/lib/aarch64-linux-gnu/libffi_pic.a
mkdir -p debian/libffi-dev/usr/share/doc/libffi8
cp README.md debian/libffi-dev/usr/share/doc/libffi8/.
cp -a build/doc/libffi.html debian/libffi-dev/usr/share/doc/libffi8/html
dh_install -a --sourcedir=debian/tmp
mkdir -p debian/libffi-dev/usr/include/aarch64-linux-gnu
mv debian/libffi-dev/usr/include/*.h \
debian/libffi-dev/usr/include/aarch64-linux-gnu/
dh_testdir
dh_testroot
dh_installchangelogs -a
rm -f debian/libffi8/usr/share/doc/libffi8/changelog
dh_installdocs -a
dh_installinfo -plibffi-dev doc/libffi.info
rm -f debian/libffi-dev/usr/share/info/dir*
rm -rf debian/libffi-dev/usr/share/doc/libffi-dev
ln -s libffi8 debian/libffi-dev/usr/share/doc/libffi-dev
dh_strip -a
dh_compress -a
dh_fixperms -a
dh_makeshlibs -plibffi8 --add-udeb=libffi8-udeb
dh_makeshlibs -a -Nlibffi8
dh_installdeb -a
dh_shlibdeps -a
dpkg-shlibdeps: warning: diversions involved - output may be incorrect
diversion by libc6 from: /lib/ld-linux-aarch64.so.1
dpkg-shlibdeps: warning: diversions involved - output may be incorrect
diversion by libc6 to: /lib/ld-linux-aarch64.so.1.usr-is-merged
dpkg-shlibdeps: warning: diversions involved - output may be incorrect
diversion by libc6 from: /lib/ld-linux-aarch64.so.1
dpkg-shlibdeps: warning: diversions involved - output may be incorrect
diversion by libc6 to: /lib/ld-linux-aarch64.so.1.usr-is-merged
dh_gencontrol -a
dh_md5sums -a
dh_builddeb -a
dpkg-deb: building package 'libffi-dev' in '../libffi-dev_3.4.6-1_arm64.deb'.
dpkg-deb: building package 'libffi8' in '../libffi8_3.4.6-1_arm64.deb'.
dpkg-deb: building package 'libffi8-dbgsym' in '../libffi8-dbgsym_3.4.6-1_arm64.deb'.
dpkg-deb: building package 'libffi8-udeb' in 'debian/.debhelper/scratch-space/build-libffi8-udeb/libffi8-udeb_3.4.6-1_arm64.deb'.
Renaming libffi8-udeb_3.4.6-1_arm64.deb to libffi8-udeb_3.4.6-1_arm64.udeb
dpkg-genbuildinfo --build=binary -O../libffi_3.4.6-1_arm64.buildinfo
dpkg-genchanges --build=binary -O../libffi_3.4.6-1_arm64.changes
dpkg-genchanges: info: binary-only upload (no source code included)
dpkg-source --after-build .
dpkg-buildpackage: info: binary-only upload (no source included)
--------------------------------------------------------------------------------
Build finished at 2024-11-17T00:08:20Z
Finished
--------
I: Built successfully
+------------------------------------------------------------------------------+
| Changes |
+------------------------------------------------------------------------------+
libffi_3.4.6-1_arm64.changes:
-----------------------------
Format: 1.8
Date: Wed, 21 Feb 2024 23:25:21 +0100
Source: libffi
Binary: libffi-dev libffi8 libffi8-dbgsym libffi8-udeb
Architecture: arm64
Version: 3.4.6-1
Distribution: sid
Urgency: medium
Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>
Changed-By: Matthias Klose <doko@debian.org>
Description:
libffi-dev - Foreign Function Interface library (development files)
libffi8 - Foreign Function Interface library runtime
libffi8-udeb - Foreign Function Interface library runtime (udeb)
Changes:
libffi (3.4.6-1) unstable; urgency=medium
.
* New upstream version.
- Add support for wasm32.
- Add support for aarch64 branch target identification (bti).
- Add support for ARCv3: ARC32 & ARC64.
- Add support for HPPA64, and many HPPA fixes.
- Add support for Haikuos on PowerPC.
- Fixes for AIX, loongson, MIPS, power, sparc64, and x86 Darwin.
* Update copyright dates.
Checksums-Sha1:
66667107e634f635b0cc9cded1019d5b8a4dfb12 56948 libffi-dev_3.4.6-1_arm64.deb
e326861a810d6db052f9b6f7aa33df7398748ce3 53432 libffi8-dbgsym_3.4.6-1_arm64.deb
13d6f0b9dca4b25ae2642ad965b8a72d922a8358 15196 libffi8-udeb_3.4.6-1_arm64.udeb
31d28d088d997e55fc529a595af1662dd7f77849 20976 libffi8_3.4.6-1_arm64.deb
87f8a40710b6fee1f610101494ea17b06a738753 5888 libffi_3.4.6-1_arm64.buildinfo
Checksums-Sha256:
aa93560d6649d02af8ab528630e7bcf99e2eb0ce55ea3c90ee8ed56d289e383e 56948 libffi-dev_3.4.6-1_arm64.deb
88f7938bbe3b603be9aecb598726eb35448152eba6968fe726e89262d430820f 53432 libffi8-dbgsym_3.4.6-1_arm64.deb
d9e04585cc8df664d9ff272146bb9dd8ce7a3391d06efa7d11670999e0575bb4 15196 libffi8-udeb_3.4.6-1_arm64.udeb
2997a6776c3f6d0b66fc5bc1521c3767bb0da0fb65c0b629acf33d517409f871 20976 libffi8_3.4.6-1_arm64.deb
000d6be72566992ce66cb6deebb6dce6b83a1345444110b67231e935a9dec326 5888 libffi_3.4.6-1_arm64.buildinfo
Files:
8ac15c03534cc57177989b97be986445 56948 libdevel optional libffi-dev_3.4.6-1_arm64.deb
7b9206d909be34073e22ae9a22ef0320 53432 debug optional libffi8-dbgsym_3.4.6-1_arm64.deb
6316aedf1947c027774d290733e27692 15196 debian-installer optional libffi8-udeb_3.4.6-1_arm64.udeb
7b71842ce079c69e58e48cef53ba0d9e 20976 libs optional libffi8_3.4.6-1_arm64.deb
45ed774ad748dc610a14522b6ee788c1 5888 libs optional libffi_3.4.6-1_arm64.buildinfo
Package-Type: udeb
+------------------------------------------------------------------------------+
| Buildinfo |
+------------------------------------------------------------------------------+
Format: 1.0
Source: libffi
Binary: libffi-dev libffi8 libffi8-dbgsym libffi8-udeb
Architecture: arm64
Version: 3.4.6-1
Checksums-Md5:
8ac15c03534cc57177989b97be986445 56948 libffi-dev_3.4.6-1_arm64.deb
7b9206d909be34073e22ae9a22ef0320 53432 libffi8-dbgsym_3.4.6-1_arm64.deb
6316aedf1947c027774d290733e27692 15196 libffi8-udeb_3.4.6-1_arm64.udeb
7b71842ce079c69e58e48cef53ba0d9e 20976 libffi8_3.4.6-1_arm64.deb
Checksums-Sha1:
66667107e634f635b0cc9cded1019d5b8a4dfb12 56948 libffi-dev_3.4.6-1_arm64.deb
e326861a810d6db052f9b6f7aa33df7398748ce3 53432 libffi8-dbgsym_3.4.6-1_arm64.deb
13d6f0b9dca4b25ae2642ad965b8a72d922a8358 15196 libffi8-udeb_3.4.6-1_arm64.udeb
31d28d088d997e55fc529a595af1662dd7f77849 20976 libffi8_3.4.6-1_arm64.deb
Checksums-Sha256:
aa93560d6649d02af8ab528630e7bcf99e2eb0ce55ea3c90ee8ed56d289e383e 56948 libffi-dev_3.4.6-1_arm64.deb
88f7938bbe3b603be9aecb598726eb35448152eba6968fe726e89262d430820f 53432 libffi8-dbgsym_3.4.6-1_arm64.deb
d9e04585cc8df664d9ff272146bb9dd8ce7a3391d06efa7d11670999e0575bb4 15196 libffi8-udeb_3.4.6-1_arm64.udeb
2997a6776c3f6d0b66fc5bc1521c3767bb0da0fb65c0b629acf33d517409f871 20976 libffi8_3.4.6-1_arm64.deb
Build-Origin: Debian
Build-Architecture: arm64
Build-Date: Sun, 17 Nov 2024 00:08:20 +0000
Build-Path: /<<PKGBUILDDIR>>
Build-Tainted-By:
merged-usr-via-aliased-dirs
Installed-Build-Depends:
autoconf (= 2.72-3),
automake (= 1:1.16.5-1.3),
autopoint (= 0.22.5-2),
autotools-dev (= 20220109.1),
base-files (= 13.5),
base-passwd (= 3.6.5),
bash (= 5.2.32-1+b2),
binutils (= 2.43.1-5),
binutils-aarch64-linux-gnu (= 2.43.1-5),
binutils-common (= 2.43.1-5),
bsdextrautils (= 2.40.2-11),
bsdutils (= 1:2.40.2-11),
build-essential (= 12.12),
bzip2 (= 1.0.8-6),
coreutils (= 9.5-1+b1),
cpp (= 4:14.2.0-1),
cpp-14 (= 14.2.0-8),
cpp-14-aarch64-linux-gnu (= 14.2.0-8),
cpp-aarch64-linux-gnu (= 4:14.2.0-1),
dash (= 0.5.12-9+b1),
debconf (= 1.5.87),
debhelper (= 13.20),
debianutils (= 5.21),
dejagnu (= 1.6.3-1),
dh-autoreconf (= 20),
dh-strip-nondeterminism (= 1.14.0-1),
diffutils (= 1:3.10-1+b1),
dpkg (= 1.22.12~1.gbp82cafd),
dpkg-dev (= 1.22.12~1.gbp82cafd),
dwz (= 0.15-1+b1),
expect (= 5.45.4-3+b1),
file (= 1:5.45-3+b1),
findutils (= 4.10.0-3),
g++ (= 4:14.2.0-1),
g++-14 (= 14.2.0-8),
g++-14-aarch64-linux-gnu (= 14.2.0-8),
g++-aarch64-linux-gnu (= 4:14.2.0-1),
gcc (= 4:14.2.0-1),
gcc-14 (= 14.2.0-8),
gcc-14-aarch64-linux-gnu (= 14.2.0-8),
gcc-14-base (= 14.2.0-8),
gcc-aarch64-linux-gnu (= 4:14.2.0-1),
gettext (= 0.22.5-2),
gettext-base (= 0.22.5-2),
grep (= 3.11-4+b1),
groff-base (= 1.23.0-5),
gzip (= 1.12-1.1+b1),
hostname (= 3.25),
init-system-helpers (= 1.67),
intltool-debian (= 0.35.0+20060710.6),
libacl1 (= 2.3.2-2+b1),
libarchive-zip-perl (= 1.68-1),
libasan8 (= 14.2.0-8),
libatomic1 (= 14.2.0-8),
libattr1 (= 1:2.5.2-2),
libaudit-common (= 1:4.0.2-2),
libaudit1 (= 1:4.0.2-2),
libbinutils (= 2.43.1-5),
libblkid1 (= 2.40.2-11),
libbz2-1.0 (= 1.0.8-6),
libc-bin (= 2.40-3),
libc-dev-bin (= 2.40-3),
libc6 (= 2.40-3),
libc6-dev (= 2.40-3),
libcap-ng0 (= 0.8.5-3+b1),
libcap2 (= 1:2.66-5+b1),
libcc1-0 (= 14.2.0-8),
libcrypt-dev (= 1:4.4.36-5),
libcrypt1 (= 1:4.4.36-5),
libctf-nobfd0 (= 2.43.1-5),
libctf0 (= 2.43.1-5),
libdb5.3t64 (= 5.3.28+dfsg2-9),
libdebconfclient0 (= 0.273),
libdebhelper-perl (= 13.20),
libdpkg-perl (= 1.22.12~1.gbp82cafd),
libelf1t64 (= 0.192-4),
libfile-stripnondeterminism-perl (= 1.14.0-1),
libgcc-14-dev (= 14.2.0-8),
libgcc-s1 (= 14.2.0-8),
libgdbm-compat4t64 (= 1.24-2),
libgdbm6t64 (= 1.24-2),
libgmp10 (= 2:6.3.0+dfsg-2+b2),
libgomp1 (= 14.2.0-8),
libgprofng0 (= 2.43.1-5),
libhwasan0 (= 14.2.0-8),
libicu72 (= 72.1-5+b1),
libisl23 (= 0.27-1),
libitm1 (= 14.2.0-8),
libjansson4 (= 2.14-2+b3),
liblsan0 (= 14.2.0-8),
libltdl-dev (= 2.4.7-8),
libltdl7 (= 2.4.7-8),
liblzma5 (= 5.6.3-1+b1),
libmagic-mgc (= 1:5.45-3+b1),
libmagic1t64 (= 1:5.45-3+b1),
libmd0 (= 1.1.0-2+b1),
libmount1 (= 2.40.2-11),
libmpc3 (= 1.3.1-1+b3),
libmpfr6 (= 4.2.1-1+b2),
libpam-modules (= 1.5.3-7+b1),
libpam-modules-bin (= 1.5.3-7+b1),
libpam-runtime (= 1.5.3-7),
libpam0g (= 1.5.3-7+b1),
libpcre2-8-0 (= 10.44-4),
libperl5.40 (= 5.40.0-7),
libpipeline1 (= 1.5.8-1),
libseccomp2 (= 2.5.5-1+b3),
libselinux1 (= 3.7-3+b1),
libsframe1 (= 2.43.1-5),
libsmartcols1 (= 2.40.2-11),
libssl3t64 (= 3.3.2-2),
libstdc++-14-dev (= 14.2.0-8),
libstdc++6 (= 14.2.0-8),
libsystemd0 (= 257~rc2-3),
libtcl8.6 (= 8.6.15+dfsg-2),
libtext-unidecode-perl (= 1.30-3),
libtinfo6 (= 6.5-2+b1),
libtool (= 2.4.7-8),
libtsan2 (= 14.2.0-8),
libubsan1 (= 14.2.0-8),
libuchardet0 (= 0.0.8-1+b2),
libudev1 (= 257~rc2-3),
libunistring5 (= 1.2-1+b1),
libuuid1 (= 2.40.2-11),
libxml-libxml-perl (= 2.0207+dfsg+really+2.0134-5+b1),
libxml-namespacesupport-perl (= 1.12-2),
libxml-sax-base-perl (= 1.09-3),
libxml-sax-perl (= 1.02+dfsg-3),
libxml2 (= 2.12.7+dfsg+really2.9.14-0.2+b1),
libzstd1 (= 1.5.6+dfsg-1+b1),
linux-libc-dev (= 6.11.7-1),
m4 (= 1.4.19-4),
make (= 4.3-4.1+b1),
man-db (= 2.13.0-1),
mawk (= 1.3.4.20240905-1),
ncurses-base (= 6.5-2),
ncurses-bin (= 6.5-2+b1),
openssl-provider-legacy (= 3.3.2-2),
patch (= 2.7.6-7+b1),
perl (= 5.40.0-7),
perl-base (= 5.40.0-7),
perl-modules-5.40 (= 5.40.0-7),
po-debconf (= 1.0.21+nmu1),
rpcsvc-proto (= 1.4.3-1+b1),
sed (= 4.9-2+b1),
sensible-utils (= 0.0.24),
sgml-base (= 1.31),
sysvinit-utils (= 3.11-1),
tar (= 1.35+dfsg-3+b1),
tcl-expect (= 5.45.4-3+b1),
tcl8.6 (= 8.6.15+dfsg-2),
tex-common (= 6.18),
texinfo (= 7.1.1-1),
texinfo-lib (= 7.1.1-1+b1),
tzdata (= 2024b-3),
ucf (= 3.0043+nmu1),
util-linux (= 2.40.2-11),
xz-utils (= 5.6.3-1+b1),
zlib1g (= 1:1.3.dfsg+really1.3.1-1+b1)
Environment:
DEB_BUILD_OPTIONS="parallel=8"
LANG="en_US.UTF-8"
LC_ALL="C.UTF-8"
SOURCE_DATE_EPOCH="1708554321"
+------------------------------------------------------------------------------+
| Package contents |
+------------------------------------------------------------------------------+
libffi-dev_3.4.6-1_arm64.deb
----------------------------
new Debian package, version 2.0.
size 56948 bytes: control archive=1628 bytes.
639 bytes, 19 lines control
2435 bytes, 32 lines md5sums
Package: libffi-dev
Source: libffi
Version: 3.4.6-1
Architecture: arm64
Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>
Installed-Size: 293
Depends: libffi8 (= 3.4.6-1)
Conflicts: libffi4-dev
Section: libdevel
Priority: optional
Multi-Arch: same
Homepage: https://sourceware.org/libffi/
Description: Foreign Function Interface library (development files)
This package contains the headers and static library files necessary for
building programs which use libffi.
.
A foreign function interface is the popular name for the interface that
allows code written in one language to call code written in another
language.
drwxr-xr-x root/root 0 2024-02-21 22:25 ./
drwxr-xr-x root/root 0 2024-02-21 22:25 ./usr/
drwxr-xr-x root/root 0 2024-02-21 22:25 ./usr/include/
drwxr-xr-x root/root 0 2024-02-21 22:25 ./usr/include/aarch64-linux-gnu/
-rw-r--r-- root/root 14041 2024-02-21 22:25 ./usr/include/aarch64-linux-gnu/ffi.h
-rw-r--r-- root/root 2748 2024-02-21 22:25 ./usr/include/aarch64-linux-gnu/ffitarget.h
drwxr-xr-x root/root 0 2024-02-21 22:25 ./usr/lib/
drwxr-xr-x root/root 0 2024-02-21 22:25 ./usr/lib/aarch64-linux-gnu/
-rw-r--r-- root/root 52990 2024-02-21 22:25 ./usr/lib/aarch64-linux-gnu/libffi.a
lrwxrwxrwx root/root 0 2024-02-21 22:25 ./usr/lib/aarch64-linux-gnu/libffi.so -> libffi.so.8.1.4
-rw-r--r-- root/root 52686 2024-02-21 22:25 ./usr/lib/aarch64-linux-gnu/libffi_pic.a
drwxr-xr-x root/root 0 2024-02-21 22:25 ./usr/lib/aarch64-linux-gnu/pkgconfig/
-rw-r--r-- root/root 214 2024-02-21 22:25 ./usr/lib/aarch64-linux-gnu/pkgconfig/libffi.pc
drwxr-xr-x root/root 0 2024-02-21 22:25 ./usr/share/
drwxr-xr-x root/root 0 2024-02-21 22:25 ./usr/share/doc-base/
-rw-r--r-- root/root 863 2021-10-11 12:12 ./usr/share/doc-base/libffi-dev.libffi
drwxr-xr-x root/root 0 2024-02-21 22:25 ./usr/share/doc/
lrwxrwxrwx root/root 0 2024-02-21 22:25 ./usr/share/doc/libffi-dev -> libffi8
drwxr-xr-x root/root 0 2024-02-21 22:25 ./usr/share/doc/libffi8/
-rw-r--r-- root/root 7150 2024-02-21 22:25 ./usr/share/doc/libffi8/README.md.gz
drwxr-xr-x root/root 0 2024-02-21 22:25 ./usr/share/doc/libffi8/html/
-rw-r--r-- root/root 7183 2024-02-21 22:25 ./usr/share/doc/libffi8/html/Arrays-Unions-Enums.html
-rw-r--r-- root/root 4428 2024-02-21 22:25 ./usr/share/doc/libffi8/html/Closure-Example.html
-rw-r--r-- root/root 5617 2024-02-21 22:25 ./usr/share/doc/libffi8/html/Complex-Type-Example.html
-rw-r--r-- root/root 5205 2024-02-21 22:25 ./usr/share/doc/libffi8/html/Complex.html
-rw-r--r-- root/root 16494 2024-02-21 22:25 ./usr/share/doc/libffi8/html/Index.html
-rw-r--r-- root/root 5081 2024-02-21 22:25 ./usr/share/doc/libffi8/html/Introduction.html
-rw-r--r-- root/root 4423 2024-02-21 22:25 ./usr/share/doc/libffi8/html/Memory-Usage.html
-rw-r--r-- root/root 3223 2024-02-21 22:25 ./usr/share/doc/libffi8/html/Missing-Features.html
-rw-r--r-- root/root 3219 2024-02-21 22:25 ./usr/share/doc/libffi8/html/Multiple-ABIs.html
-rw-r--r-- root/root 9755 2024-02-21 22:25 ./usr/share/doc/libffi8/html/Primitive-Types.html
-rw-r--r-- root/root 3819 2024-02-21 22:25 ./usr/share/doc/libffi8/html/Simple-Example.html
-rw-r--r-- root/root 6394 2024-02-21 22:25 ./usr/share/doc/libffi8/html/Size-and-Alignment.html
-rw-r--r-- root/root 4654 2024-02-21 22:25 ./usr/share/doc/libffi8/html/Structures.html
-rw-r--r-- root/root 10992 2024-02-21 22:25 ./usr/share/doc/libffi8/html/The-Basics.html
-rw-r--r-- root/root 9331 2024-02-21 22:25 ./usr/share/doc/libffi8/html/The-Closure-API.html
-rw-r--r-- root/root 3672 2024-02-21 22:25 ./usr/share/doc/libffi8/html/Thread-Safety.html
-rw-r--r-- root/root 4205 2024-02-21 22:25 ./usr/share/doc/libffi8/html/Type-Example.html
-rw-r--r-- root/root 3403 2024-02-21 22:25 ./usr/share/doc/libffi8/html/Types.html
-rw-r--r-- root/root 3362 2024-02-21 22:25 ./usr/share/doc/libffi8/html/Using-libffi.html
-rw-r--r-- root/root 4318 2024-02-21 22:25 ./usr/share/doc/libffi8/html/index.html
drwxr-xr-x root/root 0 2024-02-21 22:25 ./usr/share/info/
-rw-r--r-- root/root 10803 2024-02-21 22:25 ./usr/share/info/libffi.info.gz
drwxr-xr-x root/root 0 2024-02-21 22:25 ./usr/share/man/
drwxr-xr-x root/root 0 2024-02-21 22:25 ./usr/share/man/man3/
-rw-r--r-- root/root 409 2024-02-21 22:25 ./usr/share/man/man3/ffi.3.gz
-rw-r--r-- root/root 1082 2024-02-21 22:25 ./usr/share/man/man3/ffi_call.3.gz
-rw-r--r-- root/root 577 2024-02-21 22:25 ./usr/share/man/man3/ffi_prep_cif.3.gz
-rw-r--r-- root/root 621 2024-02-21 22:25 ./usr/share/man/man3/ffi_prep_cif_var.3.gz
libffi8-dbgsym_3.4.6-1_arm64.deb
--------------------------------
new Debian package, version 2.0.
size 53432 bytes: control archive=536 bytes.
365 bytes, 13 lines control
106 bytes, 1 lines md5sums
Package: libffi8-dbgsym
Source: libffi
Version: 3.4.6-1
Auto-Built-Package: debug-symbols
Architecture: arm64
Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>
Installed-Size: 70
Depends: libffi8 (= 3.4.6-1)
Section: debug
Priority: optional
Multi-Arch: same
Description: debug symbols for libffi8
Build-Ids: 1c121c4c2ef363e0f70cb44c08de3196d305c0a5
drwxr-xr-x root/root 0 2024-02-21 22:25 ./
drwxr-xr-x root/root 0 2024-02-21 22:25 ./usr/
drwxr-xr-x root/root 0 2024-02-21 22:25 ./usr/lib/
drwxr-xr-x root/root 0 2024-02-21 22:25 ./usr/lib/debug/
drwxr-xr-x root/root 0 2024-02-21 22:25 ./usr/lib/debug/.build-id/
drwxr-xr-x root/root 0 2024-02-21 22:25 ./usr/lib/debug/.build-id/1c/
-rw-r--r-- root/root 61392 2024-02-21 22:25 ./usr/lib/debug/.build-id/1c/121c4c2ef363e0f70cb44c08de3196d305c0a5.debug
drwxr-xr-x root/root 0 2024-02-21 22:25 ./usr/share/
drwxr-xr-x root/root 0 2024-02-21 22:25 ./usr/share/doc/
lrwxrwxrwx root/root 0 2024-02-21 22:25 ./usr/share/doc/libffi8-dbgsym -> libffi8
libffi8-udeb_3.4.6-1_arm64.udeb
-------------------------------
new Debian package, version 2.0.
size 15196 bytes: control archive=484 bytes.
442 bytes, 13 lines control
Package: libffi8-udeb
Source: libffi
Version: 3.4.6-1
Architecture: arm64
Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>
Installed-Size: 72
Depends: libc6-udeb (>= 2.40)
Section: debian-installer
Priority: optional
Description: Foreign Function Interface library runtime
A foreign function interface is the popular name for the interface that
allows code written in one language to call code written in another
language.
drwxr-xr-x root/root 0 2024-02-21 22:25 ./
drwxr-xr-x root/root 0 2024-02-21 22:25 ./usr/
drwxr-xr-x root/root 0 2024-02-21 22:25 ./usr/lib/
lrwxrwxrwx root/root 0 2024-02-21 22:25 ./usr/lib/libffi.so.8 -> libffi.so.8.1.4
-rw-r--r-- root/root 67952 2024-02-21 22:25 ./usr/lib/libffi.so.8.1.4
libffi8_3.4.6-1_arm64.deb
-------------------------
new Debian package, version 2.0.
size 20976 bytes: control archive=1132 bytes.
589 bytes, 18 lines control
218 bytes, 3 lines md5sums
45 bytes, 2 lines shlibs
1748 bytes, 43 lines symbols
66 bytes, 2 lines triggers
Package: libffi8
Source: libffi
Version: 3.4.6-1
Architecture: arm64
Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>
Installed-Size: 92
Depends: libc6 (>= 2.34)
Breaks: libffi8ubuntu1 (<< 3.4.2-1)
Replaces: libffi8ubuntu1 (<< 3.4.2-1)
Provides: libffi8ubuntu1 (= 3.4.6-1)
Section: libs
Priority: optional
Multi-Arch: same
Homepage: https://sourceware.org/libffi/
Description: Foreign Function Interface library runtime
A foreign function interface is the popular name for the interface that
allows code written in one language to call code written in another
language.
drwxr-xr-x root/root 0 2024-02-21 22:25 ./
drwxr-xr-x root/root 0 2024-02-21 22:25 ./usr/
drwxr-xr-x root/root 0 2024-02-21 22:25 ./usr/lib/
drwxr-xr-x root/root 0 2024-02-21 22:25 ./usr/lib/aarch64-linux-gnu/
lrwxrwxrwx root/root 0 2024-02-21 22:25 ./usr/lib/aarch64-linux-gnu/libffi.so.8 -> libffi.so.8.1.4
-rw-r--r-- root/root 68088 2024-02-21 22:25 ./usr/lib/aarch64-linux-gnu/libffi.so.8.1.4
drwxr-xr-x root/root 0 2024-02-21 22:25 ./usr/share/
drwxr-xr-x root/root 0 2024-02-21 22:25 ./usr/share/doc/
drwxr-xr-x root/root 0 2024-02-21 22:25 ./usr/share/doc/libffi8/
-rw-r--r-- root/root 1479 2024-02-21 22:25 ./usr/share/doc/libffi8/changelog.Debian.gz
-rw-r--r-- root/root 10165 2024-02-21 22:25 ./usr/share/doc/libffi8/copyright
lintian
-------
Setup apt archive
-----------------
Merged Build-Depends: lintian
Filtered Build-Depends: lintian
dpkg-deb: warning: root directory has unusual owner or group 998:999.
Hint: either pass --root-owner-group, see dpkg-build-api(7) or add an explicit 'Rules-Requires-Root: no' in debian/control.
dpkg-deb: warning: ignoring 1 warning about the control file(s)
dpkg-deb: building package 'sbuild-build-depends-lintian-dummy' in '/<<RESOLVERDIR>>/apt_archive/sbuild-build-depends-lintian-dummy.deb'.
Ign:1 copy:/<<RESOLVERDIR>>/apt_archive ./ InRelease
Get:2 copy:/<<RESOLVERDIR>>/apt_archive ./ Release [615 B]
Ign:3 copy:/<<RESOLVERDIR>>/apt_archive ./ Release.gpg
Get:4 copy:/<<RESOLVERDIR>>/apt_archive ./ Sources [1224 B]
Get:5 copy:/<<RESOLVERDIR>>/apt_archive ./ Packages [1286 B]
Fetched 3125 B in 0s (278 kB/s)
Reading package lists...
Get:1 file:/<<BUILDDIR>>/resolver-lBbbJx/apt_archive ./ InRelease
Ign:1 file:/<<BUILDDIR>>/resolver-lBbbJx/apt_archive ./ InRelease
Get:2 file:/<<BUILDDIR>>/resolver-lBbbJx/apt_archive ./ Release [606 B]
Get:2 file:/<<BUILDDIR>>/resolver-lBbbJx/apt_archive ./ Release [606 B]
Get:3 file:/<<BUILDDIR>>/resolver-lBbbJx/apt_archive ./ Release.gpg
Ign:3 file:/<<BUILDDIR>>/resolver-lBbbJx/apt_archive ./ Release.gpg
Reading package lists...
Reading package lists...
Install lintian build dependencies (apt-based resolver)
-------------------------------------------------------
Installing build dependencies
Reading package lists...
Building dependency tree...
Reading state information...
The following NEW packages will be installed:
sbuild-build-depends-lintian-dummy
0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded.
Need to get 856 B of archives.
After this operation, 0 B of additional disk space will be used.
Get:1 copy:/<<RESOLVERDIR>>/apt_archive ./ sbuild-build-depends-lintian-dummy 0.invalid.0 [856 B]
debconf: delaying package configuration, since apt-utils is not installed
Fetched 856 B in 0s (0 B/s)
Selecting previously unselected package sbuild-build-depends-lintian-dummy.
(Reading database ... 23998 files and directories currently installed.)
Preparing to unpack .../sbuild-build-depends-lintian-dummy_0.invalid.0_arm64.deb ...
Unpacking sbuild-build-depends-lintian-dummy (0.invalid.0) ...
Setting up sbuild-build-depends-lintian-dummy (0.invalid.0) ...
Running lintian...
W: libffi changes: distribution-and-changes-mismatch sid unstable
W: libffi source: patch-file-present-but-not-mentioned-in-series [debian/patches/git-updates.diff]
W: libffi source: superfluous-file-pattern install-sh [debian/copyright:72]
I: Lintian run was successful.
+------------------------------------------------------------------------------+
| Post Build |
+------------------------------------------------------------------------------+
+------------------------------------------------------------------------------+
| Cleanup |
+------------------------------------------------------------------------------+
Purging /<<BUILDDIR>>
Not cleaning session: cloned chroot in use
+------------------------------------------------------------------------------+
| Summary |
+------------------------------------------------------------------------------+
Build Architecture: arm64
Build Type: binary
Build-Space: 15832
Build-Time: 258
Distribution: sid
Host Architecture: arm64
Install-Time: 19
Job: /tmp/debusine-fetch-exec-upload-gjk12ir6/libffi_3.4.6-1.dsc
Lintian: warn
Machine Architecture: arm64
Package: libffi
Package-Time: 312
Source-Version: 3.4.6-1
Space: 15832
Status: successful
Version: 3.4.6-1
--------------------------------------------------------------------------------
Finished at 2024-11-17T00:08:20Z
Build needed 00:05:12, 15832k disk space