sbuild (Debian sbuild) 0.86.3~bpo12+1 (03 November 2024) on debusine-worker-arm64-demeter-09.freexian.com
+==============================================================================+
| libforest-perl 0.10-2 (arm64) Sun, 17 Nov 2024 00:16:35 +0000 |
+==============================================================================+
Package: libforest-perl
Version: 0.10-2
Source Version: 0.10-2
Distribution: sid
Machine Architecture: arm64
Host Architecture: arm64
Build Architecture: arm64
Build Type: binary
I: No tarballs found in /var/lib/debusine/worker/.cache/sbuild
Unpacking /var/lib/debusine/worker/system-images/957781/system.tar.xz to /tmp/tmp.sbuild.xq4pDstSuB...
I: NOTICE: Log filtering will replace 'sbuild-unshare-dummy-location' with '<<CHROOT>>'
+------------------------------------------------------------------------------+
| Chroot Setup Commands |
+------------------------------------------------------------------------------+
rm -f /etc/resolv.conf
----------------------
I: Finished running 'rm -f /etc/resolv.conf'.
Finished processing commands.
--------------------------------------------------------------------------------
Copying /tmp/debusine-fetch-exec-upload-qo12yvuq/dpkg-dbgsym_1.22.12~1.gbp82cafd_arm64.deb to /<<CHROOT>>...
Copying /tmp/debusine-fetch-exec-upload-qo12yvuq/dpkg_1.22.12~1.gbp82cafd_arm64.deb to /<<CHROOT>>...
Copying /tmp/debusine-fetch-exec-upload-qo12yvuq/dselect-dbgsym_1.22.12~1.gbp82cafd_arm64.deb to /<<CHROOT>>...
Copying /tmp/debusine-fetch-exec-upload-qo12yvuq/dselect_1.22.12~1.gbp82cafd_arm64.deb to /<<CHROOT>>...
Copying /tmp/debusine-fetch-exec-upload-qo12yvuq/libdpkg-dev_1.22.12~1.gbp82cafd_arm64.deb to /<<CHROOT>>...
Copying /tmp/debusine-fetch-exec-upload-qo12yvuq/dpkg-dev_1.22.12~1.gbp82cafd_all.deb to /<<CHROOT>>...
Copying /tmp/debusine-fetch-exec-upload-qo12yvuq/libdpkg-perl_1.22.12~1.gbp82cafd_all.deb to /<<CHROOT>>...
I: NOTICE: Log filtering will replace 'build/libforest-perl-k3f6NQ/resolver-vzHOWp' with '<<RESOLVERDIR>>'
+------------------------------------------------------------------------------+
| Update chroot |
+------------------------------------------------------------------------------+
Get:1 file:/build/libforest-perl-k3f6NQ/resolver-MM0Mzo/apt_archive ./ InRelease
Ign:1 file:/build/libforest-perl-k3f6NQ/resolver-MM0Mzo/apt_archive ./ InRelease
Get:2 file:/build/libforest-perl-k3f6NQ/resolver-MM0Mzo/apt_archive ./ Release [606 B]
Get:3 http://deb.debian.org/debian sid InRelease [202 kB]
Get:2 file:/build/libforest-perl-k3f6NQ/resolver-MM0Mzo/apt_archive ./ Release [606 B]
Get:4 file:/build/libforest-perl-k3f6NQ/resolver-MM0Mzo/apt_archive ./ Release.gpg
Ign:4 file:/build/libforest-perl-k3f6NQ/resolver-MM0Mzo/apt_archive ./ Release.gpg
Get:5 file:/build/libforest-perl-k3f6NQ/resolver-MM0Mzo/apt_archive ./ Packages [9246 B]
Get:6 http://deb.debian.org/debian sid/main arm64 Packages [9952 kB]
Get:7 http://deb.debian.org/debian sid/main arm64 Components [4909 kB]
Fetched 15.1 MB in 2s (6343 kB/s)
Reading package lists...
Reading package lists...
Building dependency tree...
Reading state information...
Calculating upgrade...
The following packages will be upgraded:
apt bsdextrautils bsdutils debianutils dpkg dpkg-dev libapt-pkg6.0t64
libaudit-common libaudit1 libblkid1 libbrotli1 libcap-ng0 libdpkg-perl
libglib2.0-0t64 libmarkdown2 libmount1 libpcre2-8-0 libseccomp2 libselinux1
libsemanage2 libsmartcols1 libsystemd0 libudev1 libuuid1 libxml2 login
login.defs mount passwd util-linux
30 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
Need to get 9274 kB/12.8 MB of archives.
After this operation, 603 kB disk space will be freed.
Get:1 http://deb.debian.org/debian sid/main arm64 bsdutils arm64 1:2.40.2-11 [104 kB]
Get:2 file:/build/libforest-perl-k3f6NQ/resolver-MM0Mzo/apt_archive ./ dpkg 1.22.12~1.gbp82cafd [1513 kB]
Get:3 file:/build/libforest-perl-k3f6NQ/resolver-MM0Mzo/apt_archive ./ dpkg-dev 1.22.12~1.gbp82cafd [1337 kB]
Get:4 http://deb.debian.org/debian sid/main arm64 debianutils arm64 5.21 [92.1 kB]
Get:5 http://deb.debian.org/debian sid/main arm64 libsystemd0 arm64 257~rc2-3 [416 kB]
Get:6 file:/build/libforest-perl-k3f6NQ/resolver-MM0Mzo/apt_archive ./ libdpkg-perl 1.22.12~1.gbp82cafd [647 kB]
Get:7 http://deb.debian.org/debian sid/main arm64 libudev1 arm64 257~rc2-3 [139 kB]
Get:8 http://deb.debian.org/debian sid/main arm64 libapt-pkg6.0t64 arm64 2.9.11 [921 kB]
Get:9 http://deb.debian.org/debian sid/main arm64 bsdextrautils arm64 2.40.2-11 [91.2 kB]
Get:10 http://deb.debian.org/debian sid/main arm64 libblkid1 arm64 2.40.2-11 [162 kB]
Get:11 http://deb.debian.org/debian sid/main arm64 libmount1 arm64 2.40.2-11 [190 kB]
Get:12 http://deb.debian.org/debian sid/main arm64 libsmartcols1 arm64 2.40.2-11 [135 kB]
Get:13 http://deb.debian.org/debian sid/main arm64 mount arm64 2.40.2-11 [153 kB]
Get:14 http://deb.debian.org/debian sid/main arm64 libuuid1 arm64 2.40.2-11 [35.7 kB]
Get:15 http://deb.debian.org/debian sid/main arm64 util-linux arm64 2.40.2-11 [1170 kB]
Get:16 http://deb.debian.org/debian sid/main arm64 libpcre2-8-0 arm64 10.44-4 [243 kB]
Get:17 http://deb.debian.org/debian sid/main arm64 libselinux1 arm64 3.7-3+b1 [72.1 kB]
Get:18 http://deb.debian.org/debian sid/main arm64 libseccomp2 arm64 2.5.5-1+b3 [46.8 kB]
Get:19 http://deb.debian.org/debian sid/main arm64 apt arm64 2.9.11 [1287 kB]
Get:20 http://deb.debian.org/debian sid/main arm64 libaudit-common all 1:4.0.2-2 [12.7 kB]
Get:21 http://deb.debian.org/debian sid/main arm64 libcap-ng0 arm64 0.8.5-3+b1 [17.0 kB]
Get:22 http://deb.debian.org/debian sid/main arm64 libaudit1 arm64 1:4.0.2-2 [54.2 kB]
Get:23 http://deb.debian.org/debian sid/main arm64 login arm64 1:4.16.0-2+really2.40.2-11 [80.0 kB]
Get:24 http://deb.debian.org/debian sid/main arm64 login.defs all 1:4.16.0-5 [185 kB]
Get:25 http://deb.debian.org/debian sid/main arm64 libsemanage2 arm64 3.7-2+b1 [84.5 kB]
Get:26 http://deb.debian.org/debian sid/main arm64 passwd arm64 1:4.16.0-5 [1210 kB]
Get:27 http://deb.debian.org/debian sid/main arm64 libbrotli1 arm64 1.1.0-2+b6 [297 kB]
Get:28 http://deb.debian.org/debian sid/main arm64 libglib2.0-0t64 arm64 2.82.2-3 [1411 kB]
Get:29 http://deb.debian.org/debian sid/main arm64 libmarkdown2 arm64 2.2.7-2.1 [33.1 kB]
Get:30 http://deb.debian.org/debian sid/main arm64 libxml2 arm64 2.12.7+dfsg+really2.9.14-0.2+b1 [630 kB]
debconf: delaying package configuration, since apt-utils is not installed
Fetched 9274 kB in 0s (61.3 MB/s)
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 17129 files and directories currently installed.)
Preparing to unpack .../bsdutils_1%3a2.40.2-11_arm64.deb ...
Unpacking bsdutils (1:2.40.2-11) over (1:2.40.2-10) ...
Setting up bsdutils (1:2.40.2-11) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 17129 files and directories currently installed.)
Preparing to unpack .../debianutils_5.21_arm64.deb ...
Unpacking debianutils (5.21) over (5.20+b1) ...
Setting up debianutils (5.21) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 17128 files and directories currently installed.)
Preparing to unpack .../libsystemd0_257~rc2-3_arm64.deb ...
Unpacking libsystemd0:arm64 (257~rc2-3) over (257~rc1-4) ...
Setting up libsystemd0:arm64 (257~rc2-3) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 17128 files and directories currently installed.)
Preparing to unpack .../libudev1_257~rc2-3_arm64.deb ...
Unpacking libudev1:arm64 (257~rc2-3) over (257~rc1-4) ...
Setting up libudev1:arm64 (257~rc2-3) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 17128 files and directories currently installed.)
Preparing to unpack .../libapt-pkg6.0t64_2.9.11_arm64.deb ...
Unpacking libapt-pkg6.0t64:arm64 (2.9.11) over (2.9.10) ...
Setting up libapt-pkg6.0t64:arm64 (2.9.11) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 17128 files and directories currently installed.)
Preparing to unpack .../dpkg_1.22.12~1.gbp82cafd_arm64.deb ...
Unpacking dpkg (1.22.12~1.gbp82cafd) over (1.22.11) ...
Setting up dpkg (1.22.12~1.gbp82cafd) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 17127 files and directories currently installed.)
Preparing to unpack .../bsdextrautils_2.40.2-11_arm64.deb ...
Unpacking bsdextrautils (2.40.2-11) over (2.40.2-10) ...
Preparing to unpack .../libblkid1_2.40.2-11_arm64.deb ...
Unpacking libblkid1:arm64 (2.40.2-11) over (2.40.2-10) ...
Setting up libblkid1:arm64 (2.40.2-11) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 17123 files and directories currently installed.)
Preparing to unpack .../libmount1_2.40.2-11_arm64.deb ...
Unpacking libmount1:arm64 (2.40.2-11) over (2.40.2-10) ...
Setting up libmount1:arm64 (2.40.2-11) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 17123 files and directories currently installed.)
Preparing to unpack .../libsmartcols1_2.40.2-11_arm64.deb ...
Unpacking libsmartcols1:arm64 (2.40.2-11) over (2.40.2-10) ...
Setting up libsmartcols1:arm64 (2.40.2-11) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 17123 files and directories currently installed.)
Preparing to unpack .../mount_2.40.2-11_arm64.deb ...
Unpacking mount (2.40.2-11) over (2.40.2-10) ...
Preparing to unpack .../libuuid1_2.40.2-11_arm64.deb ...
Unpacking libuuid1:arm64 (2.40.2-11) over (2.40.2-10) ...
Setting up libuuid1:arm64 (2.40.2-11) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 17123 files and directories currently installed.)
Preparing to unpack .../util-linux_2.40.2-11_arm64.deb ...
Unpacking util-linux (2.40.2-11) over (2.40.2-10) ...
Setting up util-linux (2.40.2-11) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 17120 files and directories currently installed.)
Preparing to unpack .../libpcre2-8-0_10.44-4_arm64.deb ...
Unpacking libpcre2-8-0:arm64 (10.44-4) over (10.42-4+b2) ...
Setting up libpcre2-8-0:arm64 (10.44-4) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 17119 files and directories currently installed.)
Preparing to unpack .../libselinux1_3.7-3+b1_arm64.deb ...
Unpacking libselinux1:arm64 (3.7-3+b1) over (3.7-3) ...
Setting up libselinux1:arm64 (3.7-3+b1) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 17120 files and directories currently installed.)
Preparing to unpack .../libseccomp2_2.5.5-1+b3_arm64.deb ...
Unpacking libseccomp2:arm64 (2.5.5-1+b3) over (2.5.5-1+b2) ...
Setting up libseccomp2:arm64 (2.5.5-1+b3) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 17120 files and directories currently installed.)
Preparing to unpack .../archives/apt_2.9.11_arm64.deb ...
Unpacking apt (2.9.11) over (2.9.10) ...
Setting up apt (2.9.11) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 17117 files and directories currently installed.)
Preparing to unpack .../libaudit-common_1%3a4.0.2-2_all.deb ...
Unpacking libaudit-common (1:4.0.2-2) over (1:4.0.1-3) ...
Setting up libaudit-common (1:4.0.2-2) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 17117 files and directories currently installed.)
Preparing to unpack .../libcap-ng0_0.8.5-3+b1_arm64.deb ...
Unpacking libcap-ng0:arm64 (0.8.5-3+b1) over (0.8.5-3) ...
Setting up libcap-ng0:arm64 (0.8.5-3+b1) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 17118 files and directories currently installed.)
Preparing to unpack .../libaudit1_1%3a4.0.2-2_arm64.deb ...
Unpacking libaudit1:arm64 (1:4.0.2-2) over (1:4.0.1-3) ...
Setting up libaudit1:arm64 (1:4.0.2-2) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 17118 files and directories currently installed.)
Preparing to unpack .../0-login_1%3a4.16.0-2+really2.40.2-11_arm64.deb ...
Unpacking login (1:4.16.0-2+really2.40.2-11) over (1:4.16.0-2+really2.40.2-10) ...
Preparing to unpack .../1-login.defs_1%3a4.16.0-5_all.deb ...
Unpacking login.defs (1:4.16.0-5) over (1:4.16.0-4) ...
Preparing to unpack .../2-libsemanage2_3.7-2+b1_arm64.deb ...
Unpacking libsemanage2:arm64 (3.7-2+b1) over (3.7-2) ...
Preparing to unpack .../3-passwd_1%3a4.16.0-5_arm64.deb ...
Unpacking passwd (1:4.16.0-5) over (1:4.16.0-4) ...
Preparing to unpack .../4-dpkg-dev_1.22.12~1.gbp82cafd_all.deb ...
Unpacking dpkg-dev (1.22.12~1.gbp82cafd) over (1.22.11) ...
Preparing to unpack .../5-libdpkg-perl_1.22.12~1.gbp82cafd_all.deb ...
Unpacking libdpkg-perl (1.22.12~1.gbp82cafd) over (1.22.11) ...
Preparing to unpack .../6-libbrotli1_1.1.0-2+b6_arm64.deb ...
Unpacking libbrotli1:arm64 (1.1.0-2+b6) over (1.1.0-2+b5) ...
Preparing to unpack .../7-libglib2.0-0t64_2.82.2-3_arm64.deb ...
Unpacking libglib2.0-0t64:arm64 (2.82.2-3) over (2.82.2-2) ...
Preparing to unpack .../8-libmarkdown2_2.2.7-2.1_arm64.deb ...
Unpacking libmarkdown2:arm64 (2.2.7-2.1) over (2.2.7-2+b1) ...
Preparing to unpack .../9-libxml2_2.12.7+dfsg+really2.9.14-0.2+b1_arm64.deb ...
Unpacking libxml2:arm64 (2.12.7+dfsg+really2.9.14-0.2+b1) over (2.12.7+dfsg+really2.9.14-0.1) ...
Setting up bsdextrautils (2.40.2-11) ...
Setting up login.defs (1:4.16.0-5) ...
Installing new version of config file /etc/login.defs ...
Setting up libbrotli1:arm64 (1.1.0-2+b6) ...
Setting up libglib2.0-0t64:arm64 (2.82.2-3) ...
No schema files found: doing nothing.
Setting up libdpkg-perl (1.22.12~1.gbp82cafd) ...
Setting up mount (2.40.2-11) ...
Setting up libsemanage2:arm64 (3.7-2+b1) ...
Setting up libxml2:arm64 (2.12.7+dfsg+really2.9.14-0.2+b1) ...
Setting up libmarkdown2:arm64 (2.2.7-2.1) ...
Setting up login (1:4.16.0-2+really2.40.2-11) ...
Setting up dpkg-dev (1.22.12~1.gbp82cafd) ...
Setting up passwd (1:4.16.0-5) ...
Processing triggers for man-db (2.13.0-1) ...
Processing triggers for libc-bin (2.40-3) ...
+------------------------------------------------------------------------------+
| Fetch source files |
+------------------------------------------------------------------------------+
Local sources
-------------
/tmp/debusine-fetch-exec-upload-qo12yvuq/libforest-perl_0.10-2.dsc exists in /tmp/debusine-fetch-exec-upload-qo12yvuq; copying to chroot
I: NOTICE: Log filtering will replace 'build/libforest-perl-k3f6NQ/libforest-perl-0.10' with '<<PKGBUILDDIR>>'
I: NOTICE: Log filtering will replace 'build/libforest-perl-k3f6NQ' with '<<BUILDDIR>>'
+------------------------------------------------------------------------------+
| Install package build dependencies |
+------------------------------------------------------------------------------+
Setup apt archive
-----------------
Merged Build-Depends: debhelper-compat (= 13), libmodule-install-perl, build-essential, fakeroot, perl, libtest-exception-perl, libpath-class-perl, libmoose-perl, libtest-pod-perl, libmoosex-clone-perl
Filtered Build-Depends: debhelper-compat (= 13), libmodule-install-perl, build-essential, fakeroot, perl, libtest-exception-perl, libpath-class-perl, libmoose-perl, libtest-pod-perl, libmoosex-clone-perl
dpkg-deb: warning: root directory has unusual owner or group 998:999.
Hint: either pass --root-owner-group, see dpkg-build-api(7) or add an explicit 'Rules-Requires-Root: no' in debian/control.
dpkg-deb: warning: ignoring 1 warning about the control file(s)
dpkg-deb: building package 'sbuild-build-depends-main-dummy' in '/<<RESOLVERDIR>>/apt_archive/sbuild-build-depends-main-dummy.deb'.
Ign:1 copy:/<<RESOLVERDIR>>/apt_archive ./ InRelease
Get:2 copy:/<<RESOLVERDIR>>/apt_archive ./ Release [609 B]
Ign:3 copy:/<<RESOLVERDIR>>/apt_archive ./ Release.gpg
Get:4 copy:/<<RESOLVERDIR>>/apt_archive ./ Sources [766 B]
Get:5 copy:/<<RESOLVERDIR>>/apt_archive ./ Packages [778 B]
Fetched 2153 B in 0s (151 kB/s)
Reading package lists...
Get:1 file:/<<BUILDDIR>>/resolver-MM0Mzo/apt_archive ./ InRelease
Ign:1 file:/<<BUILDDIR>>/resolver-MM0Mzo/apt_archive ./ InRelease
Get:2 file:/<<BUILDDIR>>/resolver-MM0Mzo/apt_archive ./ Release [606 B]
Get:2 file:/<<BUILDDIR>>/resolver-MM0Mzo/apt_archive ./ Release [606 B]
Get:3 file:/<<BUILDDIR>>/resolver-MM0Mzo/apt_archive ./ Release.gpg
Ign:3 file:/<<BUILDDIR>>/resolver-MM0Mzo/apt_archive ./ Release.gpg
Reading package lists...
Reading package lists...
Install main build dependencies (apt-based resolver)
----------------------------------------------------
Installing build dependencies
Reading package lists...
Building dependency tree...
Reading state information...
The following additional packages will be installed:
autoconf automake autopoint autotools-dev build-essential cpp cpp-14
cpp-14-aarch64-linux-gnu cpp-aarch64-linux-gnu debhelper dh-autoreconf
dh-strip-nondeterminism dwz fakeroot g++ g++-14 g++-14-aarch64-linux-gnu
g++-aarch64-linux-gnu gcc gcc-14 gcc-14-aarch64-linux-gnu
gcc-aarch64-linux-gnu libalgorithm-c3-perl libasan8 libc-dev-bin libc6-dev
libcc1-0 libclass-c3-perl libclass-load-perl libclass-load-xs-perl
libcrypt-dev libdata-visitor-perl libdebhelper-perl
libdevel-globaldestruction-perl libdevel-overloadinfo-perl
libdist-checkconflicts-perl libelf1t64 libeval-closure-perl libfakeroot
libfile-remove-perl libfile-stripnondeterminism-perl libgcc-14-dev
libhwasan0 libisl23 libitm1 liblsan0 libmodule-install-perl
libmodule-runtime-conflicts-perl libmodule-scandeps-perl libmoose-perl
libmoosex-clone-perl libmpc3 libmpfr6 libmro-compat-perl
libnamespace-autoclean-perl libpackage-deprecationmanager-perl
libpackage-stash-xs-perl libpath-class-perl libstdc++-14-dev
libsub-uplevel-perl libtest-exception-perl libtest-pod-perl
libtie-toobject-perl libtool libtsan2 libubsan1 libyaml-tiny-perl
linux-libc-dev m4 po-debconf rpcsvc-proto
Suggested packages:
autoconf-archive gnu-standards autoconf-doc cpp-doc gcc-14-locales
cpp-14-doc dh-make gcc-14-doc gcc-multilib manpages-dev flex bison gdb
gcc-doc gdb-aarch64-linux-gnu libc-devtools glibc-doc libstdc++-14-doc
libtool-doc gfortran | fortran95-compiler gcj-jdk m4-doc libmail-box-perl
Recommended packages:
manpages manpages-dev libclass-c3-xs-perl libdevel-lexalias-perl
libarchive-cpio-perl libfile-homedir-perl libjson-perl libpar-dist-perl
libdevel-partialdump-perl libltdl-dev libmail-sendmail-perl
The following NEW packages will be installed:
autoconf automake autopoint autotools-dev build-essential cpp cpp-14
cpp-14-aarch64-linux-gnu cpp-aarch64-linux-gnu debhelper dh-autoreconf
dh-strip-nondeterminism dwz fakeroot g++ g++-14 g++-14-aarch64-linux-gnu
g++-aarch64-linux-gnu gcc gcc-14 gcc-14-aarch64-linux-gnu
gcc-aarch64-linux-gnu libalgorithm-c3-perl libasan8 libc-dev-bin libc6-dev
libcc1-0 libclass-c3-perl libclass-load-perl libclass-load-xs-perl
libcrypt-dev libdata-visitor-perl libdebhelper-perl
libdevel-globaldestruction-perl libdevel-overloadinfo-perl
libdist-checkconflicts-perl libelf1t64 libeval-closure-perl libfakeroot
libfile-remove-perl libfile-stripnondeterminism-perl libgcc-14-dev
libhwasan0 libisl23 libitm1 liblsan0 libmodule-install-perl
libmodule-runtime-conflicts-perl libmodule-scandeps-perl libmoose-perl
libmoosex-clone-perl libmpc3 libmpfr6 libmro-compat-perl
libnamespace-autoclean-perl libpackage-deprecationmanager-perl
libpackage-stash-xs-perl libpath-class-perl libstdc++-14-dev
libsub-uplevel-perl libtest-exception-perl libtest-pod-perl
libtie-toobject-perl libtool libtsan2 libubsan1 libyaml-tiny-perl
linux-libc-dev m4 po-debconf rpcsvc-proto sbuild-build-depends-main-dummy
0 upgraded, 72 newly installed, 0 to remove and 0 not upgraded.
Need to get 62.3 MB of archives.
After this operation, 242 MB of additional disk space will be used.
Get:1 copy:/<<RESOLVERDIR>>/apt_archive ./ sbuild-build-depends-main-dummy 0.invalid.0 [944 B]
Get:2 http://deb.debian.org/debian sid/main arm64 m4 arm64 1.4.19-4 [277 kB]
Get:3 http://deb.debian.org/debian sid/main arm64 autoconf all 2.72-3 [493 kB]
Get:4 http://deb.debian.org/debian sid/main arm64 autotools-dev all 20220109.1 [51.6 kB]
Get:5 http://deb.debian.org/debian sid/main arm64 automake all 1:1.16.5-1.3 [823 kB]
Get:6 http://deb.debian.org/debian sid/main arm64 autopoint all 0.22.5-2 [723 kB]
Get:7 http://deb.debian.org/debian sid/main arm64 libc-dev-bin arm64 2.40-3 [50.9 kB]
Get:8 http://deb.debian.org/debian sid/main arm64 linux-libc-dev all 6.11.7-1 [2454 kB]
Get:9 http://deb.debian.org/debian sid/main arm64 libcrypt-dev arm64 1:4.4.36-5 [122 kB]
Get:10 http://deb.debian.org/debian sid/main arm64 rpcsvc-proto arm64 1.4.3-1+b1 [60.5 kB]
Get:11 http://deb.debian.org/debian sid/main arm64 libc6-dev arm64 2.40-3 [1591 kB]
Get:12 http://deb.debian.org/debian sid/main arm64 libisl23 arm64 0.27-1 [601 kB]
Get:13 http://deb.debian.org/debian sid/main arm64 libmpfr6 arm64 4.2.1-1+b2 [680 kB]
Get:14 http://deb.debian.org/debian sid/main arm64 libmpc3 arm64 1.3.1-1+b3 [50.5 kB]
Get:15 http://deb.debian.org/debian sid/main arm64 cpp-14-aarch64-linux-gnu arm64 14.2.0-8 [9166 kB]
Get:16 http://deb.debian.org/debian sid/main arm64 cpp-14 arm64 14.2.0-8 [1284 B]
Get:17 http://deb.debian.org/debian sid/main arm64 cpp-aarch64-linux-gnu arm64 4:14.2.0-1 [4832 B]
Get:18 http://deb.debian.org/debian sid/main arm64 cpp arm64 4:14.2.0-1 [1568 B]
Get:19 http://deb.debian.org/debian sid/main arm64 libcc1-0 arm64 14.2.0-8 [42.2 kB]
Get:20 http://deb.debian.org/debian sid/main arm64 libitm1 arm64 14.2.0-8 [24.2 kB]
Get:21 http://deb.debian.org/debian sid/main arm64 libasan8 arm64 14.2.0-8 [2579 kB]
Get:22 http://deb.debian.org/debian sid/main arm64 liblsan0 arm64 14.2.0-8 [1161 kB]
Get:23 http://deb.debian.org/debian sid/main arm64 libtsan2 arm64 14.2.0-8 [2386 kB]
Get:24 http://deb.debian.org/debian sid/main arm64 libubsan1 arm64 14.2.0-8 [1039 kB]
Get:25 http://deb.debian.org/debian sid/main arm64 libhwasan0 arm64 14.2.0-8 [1442 kB]
Get:26 http://deb.debian.org/debian sid/main arm64 libgcc-14-dev arm64 14.2.0-8 [2365 kB]
Get:27 http://deb.debian.org/debian sid/main arm64 gcc-14-aarch64-linux-gnu arm64 14.2.0-8 [17.7 MB]
Get:28 http://deb.debian.org/debian sid/main arm64 gcc-14 arm64 14.2.0-8 [519 kB]
Get:29 http://deb.debian.org/debian sid/main arm64 gcc-aarch64-linux-gnu arm64 4:14.2.0-1 [1440 B]
Get:30 http://deb.debian.org/debian sid/main arm64 gcc arm64 4:14.2.0-1 [5136 B]
Get:31 http://deb.debian.org/debian sid/main arm64 libstdc++-14-dev arm64 14.2.0-8 [2267 kB]
Get:32 http://deb.debian.org/debian sid/main arm64 g++-14-aarch64-linux-gnu arm64 14.2.0-8 [10.1 MB]
Get:33 http://deb.debian.org/debian sid/main arm64 g++-14 arm64 14.2.0-8 [20.2 kB]
Get:34 http://deb.debian.org/debian sid/main arm64 g++-aarch64-linux-gnu arm64 4:14.2.0-1 [1200 B]
Get:35 http://deb.debian.org/debian sid/main arm64 g++ arm64 4:14.2.0-1 [1332 B]
Get:36 http://deb.debian.org/debian sid/main arm64 build-essential arm64 12.12 [4624 B]
Get:37 http://deb.debian.org/debian sid/main arm64 libdebhelper-perl all 13.20 [89.7 kB]
Get:38 http://deb.debian.org/debian sid/main arm64 libtool all 2.4.7-8 [517 kB]
Get:39 http://deb.debian.org/debian sid/main arm64 dh-autoreconf all 20 [17.1 kB]
Get:40 http://deb.debian.org/debian sid/main arm64 libfile-stripnondeterminism-perl all 1.14.0-1 [19.5 kB]
Get:41 http://deb.debian.org/debian sid/main arm64 dh-strip-nondeterminism all 1.14.0-1 [8448 B]
Get:42 http://deb.debian.org/debian sid/main arm64 libelf1t64 arm64 0.192-4 [189 kB]
Get:43 http://deb.debian.org/debian sid/main arm64 dwz arm64 0.15-1+b1 [102 kB]
Get:44 http://deb.debian.org/debian sid/main arm64 po-debconf all 1.0.21+nmu1 [248 kB]
Get:45 http://deb.debian.org/debian sid/main arm64 debhelper all 13.20 [915 kB]
Get:46 http://deb.debian.org/debian sid/main arm64 libfakeroot arm64 1.36-1 [29.1 kB]
Get:47 http://deb.debian.org/debian sid/main arm64 fakeroot arm64 1.36-1 [74.4 kB]
Get:48 http://deb.debian.org/debian sid/main arm64 libalgorithm-c3-perl all 0.11-2 [10.8 kB]
Get:49 http://deb.debian.org/debian sid/main arm64 libclass-c3-perl all 0.35-2 [21.0 kB]
Get:50 http://deb.debian.org/debian sid/main arm64 libclass-load-perl all 0.25-2 [15.3 kB]
Get:51 http://deb.debian.org/debian sid/main arm64 libclass-load-xs-perl arm64 0.10-2+b4 [14.3 kB]
Get:52 http://deb.debian.org/debian sid/main arm64 libdevel-globaldestruction-perl all 0.14-4 [7144 B]
Get:53 http://deb.debian.org/debian sid/main arm64 libmro-compat-perl all 0.15-2 [11.8 kB]
Get:54 http://deb.debian.org/debian sid/main arm64 libdevel-overloadinfo-perl all 0.007-1 [7896 B]
Get:55 http://deb.debian.org/debian sid/main arm64 libeval-closure-perl all 0.14-3 [11.2 kB]
Get:56 http://deb.debian.org/debian sid/main arm64 libdist-checkconflicts-perl all 0.11-2 [10.5 kB]
Get:57 http://deb.debian.org/debian sid/main arm64 libmodule-runtime-conflicts-perl all 0.003-2 [7356 B]
Get:58 http://deb.debian.org/debian sid/main arm64 libpackage-deprecationmanager-perl all 0.18-1 [17.6 kB]
Get:59 http://deb.debian.org/debian sid/main arm64 libpackage-stash-xs-perl arm64 0.30-1+b4 [19.0 kB]
Get:60 http://deb.debian.org/debian sid/main arm64 libmoose-perl arm64 2.2207-1+b2 [766 kB]
Get:61 http://deb.debian.org/debian sid/main arm64 libtie-toobject-perl all 0.03-6 [5268 B]
Get:62 http://deb.debian.org/debian sid/main arm64 libdata-visitor-perl all 0.32-1 [21.9 kB]
Get:63 http://deb.debian.org/debian sid/main arm64 libfile-remove-perl all 1.61-2 [16.1 kB]
Get:64 http://deb.debian.org/debian sid/main arm64 libmodule-scandeps-perl all 1.35-1 [43.7 kB]
Get:65 http://deb.debian.org/debian sid/main arm64 libyaml-tiny-perl all 1.74-1 [30.7 kB]
Get:66 http://deb.debian.org/debian sid/main arm64 libmodule-install-perl all 1.21-2 [139 kB]
Get:67 http://deb.debian.org/debian sid/main arm64 libnamespace-autoclean-perl all 0.31-1 [13.8 kB]
Get:68 http://deb.debian.org/debian sid/main arm64 libmoosex-clone-perl all 0.06-3 [23.7 kB]
Get:69 http://deb.debian.org/debian sid/main arm64 libpath-class-perl all 0.37-4 [42.7 kB]
Get:70 http://deb.debian.org/debian sid/main arm64 libsub-uplevel-perl all 0.2800-3 [14.0 kB]
Get:71 http://deb.debian.org/debian sid/main arm64 libtest-exception-perl all 0.43-3 [16.9 kB]
Get:72 http://deb.debian.org/debian sid/main arm64 libtest-pod-perl all 1.52-3 [12.6 kB]
debconf: delaying package configuration, since apt-utils is not installed
Fetched 62.3 MB in 1s (95.2 MB/s)
Selecting previously unselected package m4.
(Reading database ... 17119 files and directories currently installed.)
Preparing to unpack .../00-m4_1.4.19-4_arm64.deb ...
Unpacking m4 (1.4.19-4) ...
Selecting previously unselected package autoconf.
Preparing to unpack .../01-autoconf_2.72-3_all.deb ...
Unpacking autoconf (2.72-3) ...
Selecting previously unselected package autotools-dev.
Preparing to unpack .../02-autotools-dev_20220109.1_all.deb ...
Unpacking autotools-dev (20220109.1) ...
Selecting previously unselected package automake.
Preparing to unpack .../03-automake_1%3a1.16.5-1.3_all.deb ...
Unpacking automake (1:1.16.5-1.3) ...
Selecting previously unselected package autopoint.
Preparing to unpack .../04-autopoint_0.22.5-2_all.deb ...
Unpacking autopoint (0.22.5-2) ...
Selecting previously unselected package libc-dev-bin.
Preparing to unpack .../05-libc-dev-bin_2.40-3_arm64.deb ...
Unpacking libc-dev-bin (2.40-3) ...
Selecting previously unselected package linux-libc-dev.
Preparing to unpack .../06-linux-libc-dev_6.11.7-1_all.deb ...
Unpacking linux-libc-dev (6.11.7-1) ...
Selecting previously unselected package libcrypt-dev:arm64.
Preparing to unpack .../07-libcrypt-dev_1%3a4.4.36-5_arm64.deb ...
Unpacking libcrypt-dev:arm64 (1:4.4.36-5) ...
Selecting previously unselected package rpcsvc-proto.
Preparing to unpack .../08-rpcsvc-proto_1.4.3-1+b1_arm64.deb ...
Unpacking rpcsvc-proto (1.4.3-1+b1) ...
Selecting previously unselected package libc6-dev:arm64.
Preparing to unpack .../09-libc6-dev_2.40-3_arm64.deb ...
Unpacking libc6-dev:arm64 (2.40-3) ...
Selecting previously unselected package libisl23:arm64.
Preparing to unpack .../10-libisl23_0.27-1_arm64.deb ...
Unpacking libisl23:arm64 (0.27-1) ...
Selecting previously unselected package libmpfr6:arm64.
Preparing to unpack .../11-libmpfr6_4.2.1-1+b2_arm64.deb ...
Unpacking libmpfr6:arm64 (4.2.1-1+b2) ...
Selecting previously unselected package libmpc3:arm64.
Preparing to unpack .../12-libmpc3_1.3.1-1+b3_arm64.deb ...
Unpacking libmpc3:arm64 (1.3.1-1+b3) ...
Selecting previously unselected package cpp-14-aarch64-linux-gnu.
Preparing to unpack .../13-cpp-14-aarch64-linux-gnu_14.2.0-8_arm64.deb ...
Unpacking cpp-14-aarch64-linux-gnu (14.2.0-8) ...
Selecting previously unselected package cpp-14.
Preparing to unpack .../14-cpp-14_14.2.0-8_arm64.deb ...
Unpacking cpp-14 (14.2.0-8) ...
Selecting previously unselected package cpp-aarch64-linux-gnu.
Preparing to unpack .../15-cpp-aarch64-linux-gnu_4%3a14.2.0-1_arm64.deb ...
Unpacking cpp-aarch64-linux-gnu (4:14.2.0-1) ...
Selecting previously unselected package cpp.
Preparing to unpack .../16-cpp_4%3a14.2.0-1_arm64.deb ...
Unpacking cpp (4:14.2.0-1) ...
Selecting previously unselected package libcc1-0:arm64.
Preparing to unpack .../17-libcc1-0_14.2.0-8_arm64.deb ...
Unpacking libcc1-0:arm64 (14.2.0-8) ...
Selecting previously unselected package libitm1:arm64.
Preparing to unpack .../18-libitm1_14.2.0-8_arm64.deb ...
Unpacking libitm1:arm64 (14.2.0-8) ...
Selecting previously unselected package libasan8:arm64.
Preparing to unpack .../19-libasan8_14.2.0-8_arm64.deb ...
Unpacking libasan8:arm64 (14.2.0-8) ...
Selecting previously unselected package liblsan0:arm64.
Preparing to unpack .../20-liblsan0_14.2.0-8_arm64.deb ...
Unpacking liblsan0:arm64 (14.2.0-8) ...
Selecting previously unselected package libtsan2:arm64.
Preparing to unpack .../21-libtsan2_14.2.0-8_arm64.deb ...
Unpacking libtsan2:arm64 (14.2.0-8) ...
Selecting previously unselected package libubsan1:arm64.
Preparing to unpack .../22-libubsan1_14.2.0-8_arm64.deb ...
Unpacking libubsan1:arm64 (14.2.0-8) ...
Selecting previously unselected package libhwasan0:arm64.
Preparing to unpack .../23-libhwasan0_14.2.0-8_arm64.deb ...
Unpacking libhwasan0:arm64 (14.2.0-8) ...
Selecting previously unselected package libgcc-14-dev:arm64.
Preparing to unpack .../24-libgcc-14-dev_14.2.0-8_arm64.deb ...
Unpacking libgcc-14-dev:arm64 (14.2.0-8) ...
Selecting previously unselected package gcc-14-aarch64-linux-gnu.
Preparing to unpack .../25-gcc-14-aarch64-linux-gnu_14.2.0-8_arm64.deb ...
Unpacking gcc-14-aarch64-linux-gnu (14.2.0-8) ...
Selecting previously unselected package gcc-14.
Preparing to unpack .../26-gcc-14_14.2.0-8_arm64.deb ...
Unpacking gcc-14 (14.2.0-8) ...
Selecting previously unselected package gcc-aarch64-linux-gnu.
Preparing to unpack .../27-gcc-aarch64-linux-gnu_4%3a14.2.0-1_arm64.deb ...
Unpacking gcc-aarch64-linux-gnu (4:14.2.0-1) ...
Selecting previously unselected package gcc.
Preparing to unpack .../28-gcc_4%3a14.2.0-1_arm64.deb ...
Unpacking gcc (4:14.2.0-1) ...
Selecting previously unselected package libstdc++-14-dev:arm64.
Preparing to unpack .../29-libstdc++-14-dev_14.2.0-8_arm64.deb ...
Unpacking libstdc++-14-dev:arm64 (14.2.0-8) ...
Selecting previously unselected package g++-14-aarch64-linux-gnu.
Preparing to unpack .../30-g++-14-aarch64-linux-gnu_14.2.0-8_arm64.deb ...
Unpacking g++-14-aarch64-linux-gnu (14.2.0-8) ...
Selecting previously unselected package g++-14.
Preparing to unpack .../31-g++-14_14.2.0-8_arm64.deb ...
Unpacking g++-14 (14.2.0-8) ...
Selecting previously unselected package g++-aarch64-linux-gnu.
Preparing to unpack .../32-g++-aarch64-linux-gnu_4%3a14.2.0-1_arm64.deb ...
Unpacking g++-aarch64-linux-gnu (4:14.2.0-1) ...
Selecting previously unselected package g++.
Preparing to unpack .../33-g++_4%3a14.2.0-1_arm64.deb ...
Unpacking g++ (4:14.2.0-1) ...
Selecting previously unselected package build-essential.
Preparing to unpack .../34-build-essential_12.12_arm64.deb ...
Unpacking build-essential (12.12) ...
Selecting previously unselected package libdebhelper-perl.
Preparing to unpack .../35-libdebhelper-perl_13.20_all.deb ...
Unpacking libdebhelper-perl (13.20) ...
Selecting previously unselected package libtool.
Preparing to unpack .../36-libtool_2.4.7-8_all.deb ...
Unpacking libtool (2.4.7-8) ...
Selecting previously unselected package dh-autoreconf.
Preparing to unpack .../37-dh-autoreconf_20_all.deb ...
Unpacking dh-autoreconf (20) ...
Selecting previously unselected package libfile-stripnondeterminism-perl.
Preparing to unpack .../38-libfile-stripnondeterminism-perl_1.14.0-1_all.deb ...
Unpacking libfile-stripnondeterminism-perl (1.14.0-1) ...
Selecting previously unselected package dh-strip-nondeterminism.
Preparing to unpack .../39-dh-strip-nondeterminism_1.14.0-1_all.deb ...
Unpacking dh-strip-nondeterminism (1.14.0-1) ...
Selecting previously unselected package libelf1t64:arm64.
Preparing to unpack .../40-libelf1t64_0.192-4_arm64.deb ...
Unpacking libelf1t64:arm64 (0.192-4) ...
Selecting previously unselected package dwz.
Preparing to unpack .../41-dwz_0.15-1+b1_arm64.deb ...
Unpacking dwz (0.15-1+b1) ...
Selecting previously unselected package po-debconf.
Preparing to unpack .../42-po-debconf_1.0.21+nmu1_all.deb ...
Unpacking po-debconf (1.0.21+nmu1) ...
Selecting previously unselected package debhelper.
Preparing to unpack .../43-debhelper_13.20_all.deb ...
Unpacking debhelper (13.20) ...
Selecting previously unselected package libfakeroot:arm64.
Preparing to unpack .../44-libfakeroot_1.36-1_arm64.deb ...
Unpacking libfakeroot:arm64 (1.36-1) ...
Selecting previously unselected package fakeroot.
Preparing to unpack .../45-fakeroot_1.36-1_arm64.deb ...
Unpacking fakeroot (1.36-1) ...
Selecting previously unselected package libalgorithm-c3-perl.
Preparing to unpack .../46-libalgorithm-c3-perl_0.11-2_all.deb ...
Unpacking libalgorithm-c3-perl (0.11-2) ...
Selecting previously unselected package libclass-c3-perl.
Preparing to unpack .../47-libclass-c3-perl_0.35-2_all.deb ...
Unpacking libclass-c3-perl (0.35-2) ...
Selecting previously unselected package libclass-load-perl.
Preparing to unpack .../48-libclass-load-perl_0.25-2_all.deb ...
Unpacking libclass-load-perl (0.25-2) ...
Selecting previously unselected package libclass-load-xs-perl.
Preparing to unpack .../49-libclass-load-xs-perl_0.10-2+b4_arm64.deb ...
Unpacking libclass-load-xs-perl (0.10-2+b4) ...
Selecting previously unselected package libdevel-globaldestruction-perl.
Preparing to unpack .../50-libdevel-globaldestruction-perl_0.14-4_all.deb ...
Unpacking libdevel-globaldestruction-perl (0.14-4) ...
Selecting previously unselected package libmro-compat-perl.
Preparing to unpack .../51-libmro-compat-perl_0.15-2_all.deb ...
Unpacking libmro-compat-perl (0.15-2) ...
Selecting previously unselected package libdevel-overloadinfo-perl.
Preparing to unpack .../52-libdevel-overloadinfo-perl_0.007-1_all.deb ...
Unpacking libdevel-overloadinfo-perl (0.007-1) ...
Selecting previously unselected package libeval-closure-perl.
Preparing to unpack .../53-libeval-closure-perl_0.14-3_all.deb ...
Unpacking libeval-closure-perl (0.14-3) ...
Selecting previously unselected package libdist-checkconflicts-perl.
Preparing to unpack .../54-libdist-checkconflicts-perl_0.11-2_all.deb ...
Unpacking libdist-checkconflicts-perl (0.11-2) ...
Selecting previously unselected package libmodule-runtime-conflicts-perl.
Preparing to unpack .../55-libmodule-runtime-conflicts-perl_0.003-2_all.deb ...
Unpacking libmodule-runtime-conflicts-perl (0.003-2) ...
Selecting previously unselected package libpackage-deprecationmanager-perl.
Preparing to unpack .../56-libpackage-deprecationmanager-perl_0.18-1_all.deb ...
Unpacking libpackage-deprecationmanager-perl (0.18-1) ...
Selecting previously unselected package libpackage-stash-xs-perl:arm64.
Preparing to unpack .../57-libpackage-stash-xs-perl_0.30-1+b4_arm64.deb ...
Unpacking libpackage-stash-xs-perl:arm64 (0.30-1+b4) ...
Selecting previously unselected package libmoose-perl:arm64.
Preparing to unpack .../58-libmoose-perl_2.2207-1+b2_arm64.deb ...
Unpacking libmoose-perl:arm64 (2.2207-1+b2) ...
Selecting previously unselected package libtie-toobject-perl.
Preparing to unpack .../59-libtie-toobject-perl_0.03-6_all.deb ...
Unpacking libtie-toobject-perl (0.03-6) ...
Selecting previously unselected package libdata-visitor-perl.
Preparing to unpack .../60-libdata-visitor-perl_0.32-1_all.deb ...
Unpacking libdata-visitor-perl (0.32-1) ...
Selecting previously unselected package libfile-remove-perl.
Preparing to unpack .../61-libfile-remove-perl_1.61-2_all.deb ...
Unpacking libfile-remove-perl (1.61-2) ...
Selecting previously unselected package libmodule-scandeps-perl.
Preparing to unpack .../62-libmodule-scandeps-perl_1.35-1_all.deb ...
Unpacking libmodule-scandeps-perl (1.35-1) ...
Selecting previously unselected package libyaml-tiny-perl.
Preparing to unpack .../63-libyaml-tiny-perl_1.74-1_all.deb ...
Unpacking libyaml-tiny-perl (1.74-1) ...
Selecting previously unselected package libmodule-install-perl.
Preparing to unpack .../64-libmodule-install-perl_1.21-2_all.deb ...
Unpacking libmodule-install-perl (1.21-2) ...
Selecting previously unselected package libnamespace-autoclean-perl.
Preparing to unpack .../65-libnamespace-autoclean-perl_0.31-1_all.deb ...
Unpacking libnamespace-autoclean-perl (0.31-1) ...
Selecting previously unselected package libmoosex-clone-perl.
Preparing to unpack .../66-libmoosex-clone-perl_0.06-3_all.deb ...
Unpacking libmoosex-clone-perl (0.06-3) ...
Selecting previously unselected package libpath-class-perl.
Preparing to unpack .../67-libpath-class-perl_0.37-4_all.deb ...
Unpacking libpath-class-perl (0.37-4) ...
Selecting previously unselected package libsub-uplevel-perl.
Preparing to unpack .../68-libsub-uplevel-perl_0.2800-3_all.deb ...
Unpacking libsub-uplevel-perl (0.2800-3) ...
Selecting previously unselected package libtest-exception-perl.
Preparing to unpack .../69-libtest-exception-perl_0.43-3_all.deb ...
Unpacking libtest-exception-perl (0.43-3) ...
Selecting previously unselected package libtest-pod-perl.
Preparing to unpack .../70-libtest-pod-perl_1.52-3_all.deb ...
Unpacking libtest-pod-perl (1.52-3) ...
Selecting previously unselected package sbuild-build-depends-main-dummy.
Preparing to unpack .../71-sbuild-build-depends-main-dummy_0.invalid.0_arm64.deb ...
Unpacking sbuild-build-depends-main-dummy (0.invalid.0) ...
Setting up libfile-remove-perl (1.61-2) ...
Setting up libfile-stripnondeterminism-perl (1.14.0-1) ...
Setting up libtie-toobject-perl (0.03-6) ...
Setting up libpath-class-perl (0.37-4) ...
Setting up po-debconf (1.0.21+nmu1) ...
Setting up libdebhelper-perl (13.20) ...
Setting up libtest-pod-perl (1.52-3) ...
Setting up linux-libc-dev (6.11.7-1) ...
Setting up m4 (1.4.19-4) ...
Setting up libyaml-tiny-perl (1.74-1) ...
Setting up libclass-load-perl (0.25-2) ...
Setting up libfakeroot:arm64 (1.36-1) ...
Setting up libelf1t64:arm64 (0.192-4) ...
Setting up fakeroot (1.36-1) ...
update-alternatives: using /usr/bin/fakeroot-sysv to provide /usr/bin/fakeroot (fakeroot) in auto mode
Setting up libpackage-stash-xs-perl:arm64 (0.30-1+b4) ...
Setting up autotools-dev (20220109.1) ...
Setting up libalgorithm-c3-perl (0.11-2) ...
Setting up rpcsvc-proto (1.4.3-1+b1) ...
Setting up libmpfr6:arm64 (4.2.1-1+b2) ...
Setting up libmpc3:arm64 (1.3.1-1+b3) ...
Setting up autopoint (0.22.5-2) ...
Setting up libdist-checkconflicts-perl (0.11-2) ...
Setting up autoconf (2.72-3) ...
Setting up libubsan1:arm64 (14.2.0-8) ...
Setting up dh-strip-nondeterminism (1.14.0-1) ...
Setting up dwz (0.15-1+b1) ...
Setting up libpackage-deprecationmanager-perl (0.18-1) ...
Setting up libhwasan0:arm64 (14.2.0-8) ...
Setting up libcrypt-dev:arm64 (1:4.4.36-5) ...
Setting up libasan8:arm64 (14.2.0-8) ...
Setting up libsub-uplevel-perl (0.2800-3) ...
Setting up libdevel-globaldestruction-perl (0.14-4) ...
Setting up libclass-load-xs-perl (0.10-2+b4) ...
Setting up libtsan2:arm64 (14.2.0-8) ...
Setting up libisl23:arm64 (0.27-1) ...
Setting up libnamespace-autoclean-perl (0.31-1) ...
Setting up libc-dev-bin (2.40-3) ...
Setting up libmodule-scandeps-perl (1.35-1) ...
Setting up libcc1-0:arm64 (14.2.0-8) ...
Setting up liblsan0:arm64 (14.2.0-8) ...
Setting up libitm1:arm64 (14.2.0-8) ...
Setting up libeval-closure-perl (0.14-3) ...
Setting up automake (1:1.16.5-1.3) ...
update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode
Setting up libmodule-runtime-conflicts-perl (0.003-2) ...
Setting up libclass-c3-perl (0.35-2) ...
Setting up libtest-exception-perl (0.43-3) ...
Setting up libmodule-install-perl (1.21-2) ...
Setting up cpp-14-aarch64-linux-gnu (14.2.0-8) ...
Setting up libc6-dev:arm64 (2.40-3) ...
Setting up libmro-compat-perl (0.15-2) ...
Setting up libgcc-14-dev:arm64 (14.2.0-8) ...
Setting up libstdc++-14-dev:arm64 (14.2.0-8) ...
Setting up cpp-aarch64-linux-gnu (4:14.2.0-1) ...
Setting up cpp-14 (14.2.0-8) ...
Setting up cpp (4:14.2.0-1) ...
Setting up libdevel-overloadinfo-perl (0.007-1) ...
Setting up gcc-14-aarch64-linux-gnu (14.2.0-8) ...
Setting up gcc-aarch64-linux-gnu (4:14.2.0-1) ...
Setting up g++-14-aarch64-linux-gnu (14.2.0-8) ...
Setting up libmoose-perl:arm64 (2.2207-1+b2) ...
Setting up gcc-14 (14.2.0-8) ...
Setting up g++-aarch64-linux-gnu (4:14.2.0-1) ...
Setting up libdata-visitor-perl (0.32-1) ...
Setting up g++-14 (14.2.0-8) ...
Setting up libtool (2.4.7-8) ...
Setting up libmoosex-clone-perl (0.06-3) ...
Setting up gcc (4:14.2.0-1) ...
Setting up dh-autoreconf (20) ...
Setting up g++ (4:14.2.0-1) ...
update-alternatives: using /usr/bin/g++ to provide /usr/bin/c++ (c++) in auto mode
Setting up build-essential (12.12) ...
Setting up debhelper (13.20) ...
Setting up sbuild-build-depends-main-dummy (0.invalid.0) ...
Processing triggers for man-db (2.13.0-1) ...
Processing triggers for libc-bin (2.40-3) ...
+------------------------------------------------------------------------------+
| Check architectures |
+------------------------------------------------------------------------------+
Arch check ok (arm64 included in all)
+------------------------------------------------------------------------------+
| Build environment |
+------------------------------------------------------------------------------+
Kernel: Linux 6.1.0-27-cloud-arm64 #1 SMP Debian 6.1.115-1 (2024-11-01) arm64 (aarch64)
Toolchain package versions: binutils_2.43.1-5 dpkg-dev_1.22.12~1.gbp82cafd g++-14_14.2.0-8 gcc-14_14.2.0-8 libc6-dev_2.40-3 libstdc++-14-dev_14.2.0-8 libstdc++6_14.2.0-8 linux-libc-dev_6.11.7-1
Package versions: appstream_1.0.3-1+b1 apt_2.9.11 autoconf_2.72-3 automake_1:1.16.5-1.3 autopoint_0.22.5-2 autotools-dev_20220109.1 base-files_13.5 base-passwd_3.6.5 bash_5.2.32-1+b2 binutils_2.43.1-5 binutils-aarch64-linux-gnu_2.43.1-5 binutils-common_2.43.1-5 bsdextrautils_2.40.2-11 bsdutils_1:2.40.2-11 build-essential_12.12 bzip2_1.0.8-6 ca-certificates_20240203 coreutils_9.5-1+b1 cpp_4:14.2.0-1 cpp-14_14.2.0-8 cpp-14-aarch64-linux-gnu_14.2.0-8 cpp-aarch64-linux-gnu_4:14.2.0-1 dash_0.5.12-9+b1 debconf_1.5.87 debhelper_13.20 debian-archive-keyring_2023.4 debianutils_5.21 dh-autoreconf_20 dh-strip-nondeterminism_1.14.0-1 diffstat_1.66-1+b1 diffutils_1:3.10-1+b1 dpkg_1.22.12~1.gbp82cafd dpkg-dev_1.22.12~1.gbp82cafd dwz_0.15-1+b1 e2fsprogs_1.47.1-1+b1 fakeroot_1.36-1 file_1:5.45-3+b1 findutils_4.10.0-3 g++_4:14.2.0-1 g++-14_14.2.0-8 g++-14-aarch64-linux-gnu_14.2.0-8 g++-aarch64-linux-gnu_4:14.2.0-1 gcc_4:14.2.0-1 gcc-14_14.2.0-8 gcc-14-aarch64-linux-gnu_14.2.0-8 gcc-14-base_14.2.0-8 gcc-aarch64-linux-gnu_4:14.2.0-1 gettext_0.22.5-2 gettext-base_0.22.5-2 gpg_2.2.45-2 gpgconf_2.2.45-2 gpgv_2.2.45-2 grep_3.11-4+b1 groff-base_1.23.0-5 gzip_1.12-1.1+b1 hostname_3.25 init-system-helpers_1.67 intltool-debian_0.35.0+20060710.6 iso-codes_4.17.0-1 libacl1_2.3.2-2+b1 libalgorithm-c3-perl_0.11-2 libaliased-perl_0.34-3 libappstream5_1.0.3-1+b1 libapt-pkg-perl_0.1.40+b6 libapt-pkg6.0t64_2.9.11 libarchive-zip-perl_1.68-1 libasan8_14.2.0-8 libassuan9_3.0.1-2 libatomic1_14.2.0-8 libattr1_1:2.5.2-2 libaudit-common_1:4.0.2-2 libaudit1_1:4.0.2-2 libb-hooks-endofscope-perl_0.28-1 libb-hooks-op-check-perl_0.22-3+b2 libberkeleydb-perl_0.66-1 libbinutils_2.43.1-5 libblkid1_2.40.2-11 libbrotli1_1.1.0-2+b6 libbsd0_0.12.2-2 libbz2-1.0_1.0.8-6 libc-bin_2.40-3 libc-dev-bin_2.40-3 libc6_2.40-3 libc6-dev_2.40-3 libcap-ng0_0.8.5-3+b1 libcap2_1:2.66-5+b1 libcapture-tiny-perl_0.48-2 libcc1-0_14.2.0-8 libcgi-pm-perl_4.66-1 libclass-c3-perl_0.35-2 libclass-data-inheritable-perl_0.10-1 libclass-inspector-perl_1.36-3 libclass-load-perl_0.25-2 libclass-load-xs-perl_0.10-2+b4 libclass-method-modifiers-perl_2.15-1 libclass-xsaccessor-perl_1.19-4+b4 libclone-perl_0.47-1+b1 libcom-err2_1.47.1-1+b1 libconfig-tiny-perl_2.30-1 libconst-fast-perl_0.014-2 libcpanel-json-xs-perl_4.38-1+b1 libcrypt-dev_1:4.4.36-5 libcrypt1_1:4.4.36-5 libctf-nobfd0_2.43.1-5 libctf0_2.43.1-5 libcurl3t64-gnutls_8.11.0-1 libdata-dpath-perl_0.60-1 libdata-messagepack-perl_1.02-1+b4 libdata-optlist-perl_0.114-1 libdata-validate-domain-perl_0.15-1 libdata-validate-ip-perl_0.31-1 libdata-validate-uri-perl_0.07-3 libdata-visitor-perl_0.32-1 libdb5.3t64_5.3.28+dfsg2-9 libdebconfclient0_0.273 libdebhelper-perl_13.20 libdevel-callchecker-perl_0.009-1+b1 libdevel-globaldestruction-perl_0.14-4 libdevel-overloadinfo-perl_0.007-1 libdevel-size-perl_0.84-1+b1 libdevel-stacktrace-perl_2.0500-1 libdist-checkconflicts-perl_0.11-2 libdpkg-perl_1.22.12~1.gbp82cafd libdynaloader-functions-perl_0.004-1 libelf1t64_0.192-4 libemail-address-xs-perl_1.05-1+b4 libencode-locale-perl_1.05-3 libeval-closure-perl_0.14-3 libexception-class-perl_1.45-1 libext2fs2t64_1.47.1-1+b1 libfakeroot_1.36-1 libffi8_3.4.6-1 libfile-basedir-perl_0.09-2 libfile-find-rule-perl_0.34-3 libfile-listing-perl_6.16-1 libfile-remove-perl_1.61-2 libfile-sharedir-perl_1.118-3 libfile-stripnondeterminism-perl_1.14.0-1 libfont-ttf-perl_1.06-2 libgcc-14-dev_14.2.0-8 libgcc-s1_14.2.0-8 libgcrypt20_1.11.0-6 libgdbm-compat4t64_1.24-2 libgdbm6t64_1.24-2 libglib2.0-0t64_2.82.2-3 libgmp10_2:6.3.0+dfsg-2+b2 libgnutls30t64_3.8.8-2 libgomp1_14.2.0-8 libgpg-error0_1.50-4 libgprofng0_2.43.1-5 libgssapi-krb5-2_1.21.3-3 libhogweed6t64_3.10-1+b1 libhtml-form-perl_6.12-1 libhtml-html5-entities-perl_0.004-3 libhtml-parser-perl_3.83-1+b1 libhtml-tagset-perl_3.24-1 libhtml-tokeparser-simple-perl_3.16-4 libhtml-tree-perl_5.07-3 libhttp-cookies-perl_6.11-1 libhttp-date-perl_6.06-1 libhttp-message-perl_7.00-2 libhttp-negotiate-perl_6.01-2 libhwasan0_14.2.0-8 libicu72_72.1-5+b1 libidn2-0_2.3.7-2+b1 libimport-into-perl_1.002005-2 libio-html-perl_1.004-3 libio-interactive-perl_1.025-1 libio-socket-ssl-perl_2.089-1 libio-string-perl_1.08-4 libipc-run3-perl_0.049-1 libipc-system-simple-perl_1.30-2 libisl23_0.27-1 libiterator-perl_0.03+ds1-2 libiterator-util-perl_0.02+ds1-2 libitm1_14.2.0-8 libjansson4_2.14-2+b3 libjson-maybexs-perl_1.004008-1 libk5crypto3_1.21.3-3 libkeyutils1_1.6.3-4 libkrb5-3_1.21.3-3 libkrb5support0_1.21.3-3 libldap-2.5-0_2.5.18+dfsg-3+b1 liblist-compare-perl_0.55-2 liblist-someutils-perl_0.59-1 liblist-utilsby-perl_0.12-2 liblsan0_14.2.0-8 liblwp-mediatypes-perl_6.04-2 liblwp-protocol-https-perl_6.14-1 liblz1_1.15~pre2-1 liblz4-1_1.9.4-3+b1 liblzma5_5.6.3-1+b1 liblzo2-2_2.10-3+b1 libmagic-mgc_1:5.45-3+b1 libmagic1t64_1:5.45-3+b1 libmarkdown2_2.2.7-2.1 libmd0_1.1.0-2+b1 libmldbm-perl_2.05-4 libmodule-implementation-perl_0.09-2 libmodule-install-perl_1.21-2 libmodule-runtime-conflicts-perl_0.003-2 libmodule-runtime-perl_0.016-2 libmodule-scandeps-perl_1.35-1 libmoo-perl_2.005005-1 libmoose-perl_2.2207-1+b2 libmoosex-clone-perl_0.06-3 libmoox-aliases-perl_0.001006-2 libmount1_2.40.2-11 libmouse-perl_2.5.11-1+b1 libmpc3_1.3.1-1+b3 libmpfr6_4.2.1-1+b2 libmro-compat-perl_0.15-2 libnamespace-autoclean-perl_0.31-1 libnamespace-clean-perl_0.27-2 libnet-domain-tld-perl_1.75-4 libnet-http-perl_6.23-1 libnet-ipv6addr-perl_1.02-1 libnet-netmask-perl_2.0002-2 libnet-ssleay-perl_1.94-2 libnetaddr-ip-perl_4.079+dfsg-2+b4 libnettle8t64_3.10-1+b1 libnghttp2-14_1.64.0-1 libnghttp3-9_1.4.0-1+b1 libngtcp2-16_1.6.0-1 libngtcp2-crypto-gnutls8_1.6.0-1 libnumber-compare-perl_0.03-3 libp11-kit0_0.25.5-2+b1 libpackage-deprecationmanager-perl_0.18-1 libpackage-stash-perl_0.40-1 libpackage-stash-xs-perl_0.30-1+b4 libpam-modules_1.5.3-7+b1 libpam-modules-bin_1.5.3-7+b1 libpam-runtime_1.5.3-7 libpam0g_1.5.3-7+b1 libparams-classify-perl_0.015-2+b4 libparams-util-perl_1.102-3+b1 libpath-class-perl_0.37-4 libpath-tiny-perl_0.146-1 libpcre2-8-0_10.44-4 libperl5.40_5.40.0-7 libperlio-gzip-perl_0.20-1+b4 libperlio-utf8-strict-perl_0.010-1+b3 libpipeline1_1.5.8-1 libproc-processtable-perl_0.636-1+b3 libpsl5t64_0.21.2-1.1+b1 libreadline8t64_8.2-5 libregexp-wildcards-perl_1.05-3 librole-tiny-perl_2.002004-1 librtmp1_2.4+20151223.gitfa8646d.1-2+b5 libsasl2-2_2.1.28+dfsg1-8 libsasl2-modules-db_2.1.28+dfsg1-8 libseccomp2_2.5.5-1+b3 libselinux1_3.7-3+b1 libsemanage-common_3.7-2 libsemanage2_3.7-2+b1 libsepol2_3.7-1 libsereal-decoder-perl_5.004+ds-1+b3 libsereal-encoder-perl_5.004+ds-1+b3 libsframe1_2.43.1-5 libsmartcols1_2.40.2-11 libsort-versions-perl_1.62-3 libsqlite3-0_3.46.1-1 libss2_1.47.1-1+b1 libssh2-1t64_1.11.1-1 libssl3t64_3.3.2-2 libstdc++-14-dev_14.2.0-8 libstdc++6_14.2.0-8 libstemmer0d_2.2.0-4+b2 libstrictures-perl_2.000006-1 libsub-exporter-perl_0.990-1 libsub-exporter-progressive-perl_0.001013-3 libsub-identify-perl_0.14-3+b3 libsub-install-perl_0.929-1 libsub-name-perl_0.27-1+b3 libsub-quote-perl_2.006008-1 libsub-uplevel-perl_0.2800-3 libsyntax-keyword-try-perl_0.30-1+b1 libsystemd0_257~rc2-3 libtasn1-6_4.19.0-3+b3 libterm-readkey-perl_2.38-2+b4 libtest-exception-perl_0.43-3 libtest-pod-perl_1.52-3 libtext-glob-perl_0.11-3 libtext-levenshteinxs-perl_0.03-5+b4 libtext-markdown-discount-perl_0.16-1+b3 libtext-xslate-perl_3.5.9-2+b1 libtie-toobject-perl_0.03-6 libtime-duration-perl_1.21-2 libtime-moment-perl_0.44-2+b4 libtimedate-perl_2.3300-2 libtinfo6_6.5-2+b1 libtool_2.4.7-8 libtry-tiny-perl_0.32-1 libtsan2_14.2.0-8 libubsan1_14.2.0-8 libuchardet0_0.0.8-1+b2 libudev1_257~rc2-3 libunicode-utf8-perl_0.62-2+b3 libunistring5_1.2-1+b1 liburi-perl_5.30-1 libuuid1_2.40.2-11 libvariable-magic-perl_0.64-1+b1 libwww-mechanize-perl_2.19-1 libwww-perl_6.77-1 libwww-robotrules-perl_6.02-1 libxml-libxml-perl_2.0207+dfsg+really+2.0134-5+b1 libxml-namespacesupport-perl_1.12-2 libxml-sax-base-perl_1.09-3 libxml-sax-perl_1.02+dfsg-3 libxml2_2.12.7+dfsg+really2.9.14-0.2+b1 libxmlb2_0.3.21-1 libxs-parse-keyword-perl_0.46-1+b1 libxxhash0_0.8.2-2+b2 libyaml-0-2_0.2.5-1+b2 libyaml-libyaml-perl_0.902.0+ds-2+b1 libyaml-tiny-perl_1.74-1 libzstd1_1.5.6+dfsg-1+b1 lintian_2.120.0 linux-libc-dev_6.11.7-1 login_1:4.16.0-2+really2.40.2-11 login.defs_1:4.16.0-5 logsave_1.47.1-1+b1 lzop_1.04-2+b1 m4_1.4.19-4 make_4.3-4.1+b1 man-db_2.13.0-1 mawk_1.3.4.20240905-1 mount_2.40.2-11 ncurses-base_6.5-2 ncurses-bin_6.5-2+b1 netbase_6.4 openssl_3.3.2-2 openssl-provider-legacy_3.3.2-2 passwd_1:4.16.0-5 patch_2.7.6-7+b1 patchutils_0.4.2-1+b1 perl_5.40.0-7 perl-base_5.40.0-7 perl-modules-5.40_5.40.0-7 perl-openssl-defaults_7+b2 plzip_1.11-2 po-debconf_1.0.21+nmu1 readline-common_8.2-5 rpcsvc-proto_1.4.3-1+b1 sbuild-build-depends-main-dummy_0.invalid.0 sed_4.9-2+b1 sensible-utils_0.0.24 shared-mime-info_2.4-5+b1 sysvinit-utils_3.11-1 t1utils_1.41-4+b1 tar_1.35+dfsg-3+b1 tzdata_2024b-3 ucf_3.0043+nmu1 unzip_6.0-28+b1 util-linux_2.40.2-11 xz-utils_5.6.3-1+b1 zlib1g_1:1.3.dfsg+really1.3.1-1+b1
+------------------------------------------------------------------------------+
| Build |
+------------------------------------------------------------------------------+
Unpack source
-------------
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA512
Format: 3.0 (quilt)
Source: libforest-perl
Binary: libforest-perl
Architecture: all
Version: 0.10-2
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Uploaders: Salvatore Bonaccorso <carnil@debian.org>
Homepage: https://metacpan.org/release/Forest
Standards-Version: 3.9.5
Vcs-Browser: https://salsa.debian.org/perl-team/modules/packages/libforest-perl
Vcs-Git: https://salsa.debian.org/perl-team/modules/packages/libforest-perl.git
Testsuite: autopkgtest-pkg-perl
Build-Depends: debhelper-compat (= 13), libmodule-install-perl
Build-Depends-Indep: perl, libtest-exception-perl, libpath-class-perl, libmoose-perl, libtest-pod-perl, libmoosex-clone-perl
Package-List:
libforest-perl deb perl optional arch=all
Checksums-Sha1:
dc61ab17b749bc63c2fb74cb2e4a34bb999ac97b 37166 libforest-perl_0.10.orig.tar.gz
ab9568ad60dd1673dbc9e04ef2f9a72b78ad9747 3192 libforest-perl_0.10-2.debian.tar.xz
Checksums-Sha256:
f8cc11607cfa88d1e25e26157e05803635449794be53682bd2cb6be7afbfe810 37166 libforest-perl_0.10.orig.tar.gz
149e8a7643bf26d07563968bddf0f6e88d0d182638045490ad429d6a2fde4dee 3192 libforest-perl_0.10-2.debian.tar.xz
Files:
455702ed7391a8482beae37ef2d1cbae 37166 libforest-perl_0.10.orig.tar.gz
23dd8f0a4a6e7edf51129b3abd1bc42a 3192 libforest-perl_0.10-2.debian.tar.xz
-----BEGIN PGP SIGNATURE-----
iQIzBAEBCgAdFiEEsjhixBXWVlpOhsvXV5wWDUyeI+gFAmKo8SgACgkQV5wWDUye
I+jj2g/8DbEM0L8gw2omReD+XfBsY/a988k/I9QmcHNSzJJ8vXStq7CGE+7KG0cf
/anDvw9Xy+/Z2AgnA3adRnXY8wuHvlUKS6eN0yBQH6/XiDuW4YmBhgbwGulGPvUT
bRWhrxOAeOgVZyBRcoLccM7bvFSp4EXg4Cq53aK4TNqVIoKgjIrDQSvxrIII8ggS
vjw4sxpN3GGkZCiJRzINuiPumvvmYghI6uxiJdrUQk66mhef+65ISCZgxwmSrXux
9MBOUoU7S+n4V9W+dBkzevZcQOspFKgyRq7No6/4B0ymB1tTb//xXeIFEPxwOHK/
N9E0DbhgkJhiRVjqGM4dQbdb2fhjEtFRD1TQM92AGoQw7rWbjLKArRJ1t0dTu1Qt
casQCXS/tJ92VhHg/6sU38YY9/iUCFK+RvBcIEmpfm1jlFmcNNFYg91wHZKP7sY5
bmOquAacPbtg9qY/KW5pRnChhlG8qFRJcFJmDVNc5wucT9daphsROjc6zjnqJW5G
AMfZbUIlqTT/g4W+26+8kdXqqmbH1Hl8/H6MtCHuZd3FXGSAi3+rEtwwc5btRsfj
+Xd9mKqecly7sxW10MC9/ZQs4D54rf5a7CEtVUCQaJl6BFfWRCwjz2v6KLm3nCWa
gT7CIerzGpygrag/zUD91sE7cC8VZcUxgtRH5fb1BapqEeVmxjw=
=baw0
-----END PGP SIGNATURE-----
gpgv: Signature made Tue Jun 14 20:35:52 2022 UTC
gpgv: using RSA key B23862C415D6565A4E86CBD7579C160D4C9E23E8
gpgv: Can't check signature: No public key
dpkg-source: warning: cannot verify inline signature for ./libforest-perl_0.10-2.dsc: no acceptable signature found
dpkg-source: info: extracting libforest-perl in /<<PKGBUILDDIR>>
dpkg-source: info: unpacking libforest-perl_0.10.orig.tar.gz
dpkg-source: info: unpacking libforest-perl_0.10-2.debian.tar.xz
dpkg-source: info: using patch list from debian/patches/series
dpkg-source: info: applying fix-pod-spelling.patch
Check disk space
----------------
Sufficient free space for build
User Environment
----------------
APT_CONFIG=/var/lib/sbuild/apt.conf
HOME=/sbuild-nonexistent
LANG=en_US.UTF-8
LC_ALL=C.UTF-8
LOGNAME=debusine-worker
PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games
SHELL=/bin/sh
USER=debusine-worker
dpkg-buildpackage
-----------------
Command: dpkg-buildpackage -us -uc -b -rfakeroot
dpkg-buildpackage: info: source package libforest-perl
dpkg-buildpackage: info: source version 0.10-2
dpkg-buildpackage: info: source distribution unstable
dpkg-buildpackage: info: source changed by Jelmer Vernooij <jelmer@debian.org>
dpkg-source --before-build .
dpkg-buildpackage: info: host architecture arm64
debian/rules clean
dh clean
dh_clean
debian/rules binary
dh binary
dh_update_autotools_config
dh_autoreconf
dh_auto_configure
/usr/bin/perl Makefile.PL INSTALLDIRS=vendor "OPTIMIZE=-g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wdate-time -D_FORTIFY_SOURCE=2" "LD=aarch64-linux-gnu-gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wl,-z,relro"
Cannot determine perl version info from lib/Forest.pm
Checking if your kit is complete...
Looks good
Generating a Unix-style Makefile
Writing Makefile for Forest
Writing MYMETA.yml and MYMETA.json
dh_auto_build
make -j4
make[1]: Entering directory '/<<PKGBUILDDIR>>'
cp lib/Forest/Tree/Writer/SimpleASCII.pm blib/lib/Forest/Tree/Writer/SimpleASCII.pm
cp lib/Forest/Tree/Writer/SimpleHTML.pm blib/lib/Forest/Tree/Writer/SimpleHTML.pm
cp lib/Forest/Tree/Loader.pm blib/lib/Forest/Tree/Loader.pm
cp lib/Forest/Tree/Indexer/SimpleUIDIndexer.pm blib/lib/Forest/Tree/Indexer/SimpleUIDIndexer.pm
cp lib/Forest.pm blib/lib/Forest.pm
cp lib/Forest/Tree.pm blib/lib/Forest/Tree.pm
cp lib/Forest/Tree/Constructor.pm blib/lib/Forest/Tree/Constructor.pm
cp lib/Forest/Tree/Writer/ASCIIWithBranches.pm blib/lib/Forest/Tree/Writer/ASCIIWithBranches.pm
cp lib/Forest/Tree/Builder.pm blib/lib/Forest/Tree/Builder.pm
cp lib/Forest/Tree/Reader/SimpleTextFile.pm blib/lib/Forest/Tree/Reader/SimpleTextFile.pm
cp lib/Forest/Tree/Loader/SimpleUIDLoader.pm blib/lib/Forest/Tree/Loader/SimpleUIDLoader.pm
cp lib/Forest/Tree/Reader.pm blib/lib/Forest/Tree/Reader.pm
cp lib/Forest/Tree/Roles/LoadWithMetaData.pm blib/lib/Forest/Tree/Roles/LoadWithMetaData.pm
cp lib/Forest/Tree/Roles/MetaData.pm blib/lib/Forest/Tree/Roles/MetaData.pm
cp lib/Forest/Tree/Indexer.pm blib/lib/Forest/Tree/Indexer.pm
cp lib/Forest/Tree/Roles/HasNodeFormatter.pm blib/lib/Forest/Tree/Roles/HasNodeFormatter.pm
cp lib/Forest/Tree/Pure.pm blib/lib/Forest/Tree/Pure.pm
cp lib/Forest/Tree/Builder/SimpleTextFile.pm blib/lib/Forest/Tree/Builder/SimpleTextFile.pm
cp lib/Forest/Tree/Builder/Callback.pm blib/lib/Forest/Tree/Builder/Callback.pm
cp lib/Forest/Tree/Writer.pm blib/lib/Forest/Tree/Writer.pm
cp lib/Forest/Tree/Roles/JSONable.pm blib/lib/Forest/Tree/Roles/JSONable.pm
Manifying 21 pod documents
make[1]: Leaving directory '/<<PKGBUILDDIR>>'
dh_auto_test
make -j4 test TEST_VERBOSE=1
make[1]: Entering directory '/<<PKGBUILDDIR>>'
PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'inc', 'blib/lib', 'blib/arch')" t/*.t
t/000_load.t ...........................
1..15
ok 1 - use Forest;
ok 2 - use Forest::Tree;
ok 3 - use Forest::Tree::Reader;
ok 4 - use Forest::Tree::Reader::SimpleTextFile;
ok 5 - use Forest::Tree::Writer;
ok 6 - use Forest::Tree::Writer::SimpleASCII;
ok 7 - use Forest::Tree::Writer::ASCIIWithBranches;
ok 8 - use Forest::Tree::Writer::SimpleHTML;
ok 9 - use Forest::Tree::Indexer;
ok 10 - use Forest::Tree::Indexer::SimpleUIDIndexer;
ok 11 - use Forest::Tree::Loader;
ok 12 - use Forest::Tree::Loader::SimpleUIDLoader;
ok 13 - use Forest::Tree::Roles::JSONable;
ok 14 - use Forest::Tree::Roles::HasNodeFormatter;
ok 15 - use Forest::Tree::Roles::MetaData;
ok
t/010_Tree.t ...........................
1..89
ok 1 - use Forest::Tree;
ok 2 - An object of class 'Forest::Tree' isa 'Forest::Tree'
ok 3 - ... this is the tree root
ok 4 - ... this is the leaf
ok 5 - ... no parent
ok 6 - ... no parent
ok 7 - ... no node value
ok 8 - ... no children
ok 9 - ... the root has a depth of -1
ok 10 - ... the root has a height of 0
ok 11 - ... the root has a size of 1
ok 12 - An object of class 'Forest::Tree' isa 'Forest::Tree'
ok 13 - ... no parent
ok 14 - ... no parent
ok 15 - ... this is a leaf
ok 16 - ... this is a root
ok 17 - ... got the right node value
ok 18 - ... the child has a depth of -1
ok 19 - ... no children
ok 20 - ... this is no longer leaf
ok 21 - ... 1 child
ok 22 - ... the root still has a depth of -1
ok 23 - ... the root now has a height of 1
ok 24 - ... the root now has a size of 2
ok 25 - ... got the right child
ok 26 - ... this is no longer a root
ok 27 - ... but this is still a leaf
ok 28 - ... has parent now
ok 29 - ... has parent now
ok 30 - An object of class 'Forest::Tree' isa 'Forest::Tree'
ok 31 - ... its parent is tree
ok 32 - ... the child now has a depth of 0
ok 33 - ... There are no siblings
ok 34 - An object of class 'Forest::Tree' isa 'Forest::Tree'
ok 35 - ... no parent
ok 36 - ... no parent
ok 37 - ... this is a leaf
ok 38 - ... this is a root
ok 39 - ... got the right node value
ok 40 - ... the child has a depth of -1
ok 41 - ... no children
ok 42 - ... one child
ok 43 - ... this is no longer a leaf
ok 44 - ... the child still has a depth of 0
ok 45 - ... this is no longer a root
ok 46 - ... but this is still a leaf
ok 47 - ... has parent now
ok 48 - ... has parent now
ok 49 - An object of class 'Forest::Tree' isa 'Forest::Tree'
ok 50 - ... its parent is tree
ok 51 - ... the child now has a depth of 1
ok 52 - ... the root now has a height of 2
ok 53 - ... the root now has a size of 3
ok 54 - An object of class 'Forest::Tree' isa 'Forest::Tree'
ok 55 - An object of class 'Forest::Tree' isa 'Forest::Tree'
ok 56 - An object of class 'Forest::Tree' isa 'Forest::Tree'
ok 57 - ... There are no siblings
ok 58 - ... 2 children
ok 59 - ... this is no longer a root
ok 60 - ... but this is still a leaf
ok 61 - ... its parent is tree
ok 62 - ... the child now has a depth of 1
ok 63 - ... 3 children
ok 64 - ... this is no longer a root
ok 65 - ... but this is still a leaf
ok 66 - ... its parent is tree
ok 67 - ... the child now has a depth of 1
ok 68 - ... 4 children
ok 69 - ... this is no longer a root
ok 70 - ... but this is still a leaf
ok 71 - ... its parent is tree
ok 72 - ... the child now has a depth of 1
ok 73 - ... the root now has a height of 2
ok 74 - ... the root now has a size of 6
ok 75 - ... removing child 1
ok 76 - ... the root now has a height of 1
ok 77 - ... the root now has a size of 4
ok 78 - ... removing child 1
ok 79 - ... the root now has a height of 1
ok 80 - ... the root now has a size of 3
ok 81 - ... the root now has a height of 1
ok 82 - ... the root now has a size of 3
ok 83 - locate new child
ok 84 - ... the root now has a height of 1
ok 85 - ... the root now has a size of 3
ok 86 - correct node
ok 87 - ... the root now has a height of 1
ok 88 - ... the root now has a size of 3
ok 89 - correct node
ok
t/011_Tree_MetaData.t ..................
1..34
ok 1 - use Forest::Tree;
ok 2 - use Forest::Tree::Reader::SimpleTextFile;
ok 3 - use Forest::Tree::Indexer;
ok 4 - use Forest::Tree::Indexer::SimpleUIDIndexer;
ok 5 - use Forest::Tree::Roles::MetaData;
ok 6 - ... My::Tree isa Forest::Tree
ok 7 - ... My::Tree isa Forest::Tree::Pure
ok 8 - ... My::Tree does Forest::Tree::Roles::MetaData
ok 9 - An object of class 'My::Tree::Reader' isa 'My::Tree::Reader'
ok 10 - An object of class 'My::Tree::Reader' isa 'Forest::Tree::Reader::SimpleTextFile'
ok 11 - An object of class 'My::Tree' isa 'My::Tree'
ok 12 - An object of class 'My::Tree' isa 'Forest::Tree'
ok 13 - ... our tree does Forest::Tree::Roles::MetaData
ok 14 - ... got the right root node
ok 15 - ... got the right metadata hash
ok 16 - ... got the right root node metadata
ok 17 - ... got the right root node metadata
ok 18 - ... got the right root node
ok 19 - ... got the right metadata hash
ok 20 - ... got the right metadata hash
ok 21 - ... got the right root node metadata
ok 22 - ... got the right root node metadata
ok 23 - ... got the right root node
ok 24 - ... got the right root node metadata
ok 25 - ... got the right root node metadata
ok 26 - ... got the right root node
ok 27 - ... got the right root node metadata
ok 28 - ... got the right root node metadata
ok 29 - ... got the right root node
ok 30 - ... got the right root node metadata
ok 31 - ... got the right root node metadata
ok 32 - ... got the right root node
ok 33 - ... got the right root node metadata
ok 34 - ... got the right root node metadata
ok
t/012_Tree_errors.t ....................
1..10
ok 1 - use Forest::Tree;
ok 2 - An object of class 'Forest::Tree' isa 'Forest::Tree'
ok 3 - ... throws exception
ok 4 - ... throws exception
ok 5 - ... throws exception
ok 6 - ... throws exception
ok 7 - ... throws exception
ok 8 - ... throws exception
ok 9 - ... throws exception
ok 10 - ... throws exception
ok
t/013_Tree_build_with_constructor.t ....
1..17
ok 1 - use Forest::Tree;
ok 2 - An object of class 'Forest::Tree' isa 'Forest::Tree'
ok 3 - An object of class 'Forest::Tree' isa 'Forest::Tree'
ok 4 - ... got a parent node
ok 5 - An object of class 'Forest::Tree' isa 'Forest::Tree'
ok 6 - ... got a parent node
ok 7 - An object of class 'Forest::Tree' isa 'Forest::Tree'
ok 8 - ... got a parent node
ok 9 - An object of class 'Forest::Tree' isa 'Forest::Tree'
ok 10 - ... got a parent node
ok 11 - An object of class 'Forest::Tree' isa 'Forest::Tree'
ok 12 - ... got a parent node
ok 13 - An object of class 'Forest::Tree' isa 'Forest::Tree'
ok 14 - ... got a parent node
ok 15 - An object of class 'Forest::Tree' isa 'Forest::Tree'
ok 16 - ... got a parent node
ok 17 - ... the tree was properly initialized
ok
t/014_Pure.t ...........................
1..52
ok 1 - use Forest::Tree::Pure;
ok 2 - An object of class 'Forest::Tree::Pure' isa 'Forest::Tree::Pure'
ok 3 - ... this is the leaf
ok 4 - ... no node value
ok 5 - ... no children
ok 6 - ... the root has a height of 0
ok 7 - ... the root has a size of 1
ok 8 - An object of class 'Forest::Tree::Pure' isa 'Forest::Tree::Pure'
ok 9 - ... this is a leaf
ok 10 - ... got the right node value
ok 11 - ... no children
ok 12 - ... original unmodified
ok 13 - ... no node value
ok 14 - ... no children
ok 15 - ... the root has a height of 0
ok 16 - ... the root has a size of 1
ok 17 - ... this is no longer leaf
ok 18 - ... 1 child
ok 19 - ... the root now has a height of 1
ok 20 - ... the root now has a size of 2
ok 21 - ... got the right child
ok 22 - ... child is still a leaf
ok 23 - An object of class 'Forest::Tree::Pure' isa 'Forest::Tree::Pure'
ok 24 - ... this is a leaf
ok 25 - ... got the right node value
ok 26 - ... no children
ok 27 - ... one child
ok 28 - ... this is no longer a leaf
ok 29 - ... but this is still a leaf
ok 30 - ... the root now has a height of 2
ok 31 - ... the root now has a size of 3
ok 32 - An object of class 'Forest::Tree::Pure' isa 'Forest::Tree::Pure'
ok 33 - An object of class 'Forest::Tree::Pure' isa 'Forest::Tree::Pure'
ok 34 - An object of class 'Forest::Tree::Pure' isa 'Forest::Tree::Pure'
ok 35 - ... 2 children
ok 36 - ... 3 children
ok 37 - ... 4 children
ok 38 - ... the root now has a height of 2
ok 39 - ... the root now has a size of 6
ok 40 - ... the root now has a height of 1
ok 41 - ... the root now has a size of 4
ok 42 - ... the root now has a height of 1
ok 43 - ... the root now has a size of 3
ok 44 - ... the root now has a height of 1
ok 45 - ... the root now has a size of 3
ok 46 - locate new child
ok 47 - ... the root now has a height of 1
ok 48 - ... the root now has a size of 3
ok 49 - locate new child
ok 50 - ... the root now has a height of 1
ok 51 - ... the root now has a size of 3
ok 52 - correct node
ok
t/020_Tree_Reader.t ....................
1..23
ok 1 - use Forest::Tree;
ok 2 - use Forest::Tree::Reader;
ok 3 - use Forest::Tree::Reader::SimpleTextFile;
ok 4 - An object of class 'Forest::Tree::Reader::SimpleTextFile' isa 'Forest::Tree::Reader::SimpleTextFile'
ok 5 - ... loader does Forest::Tree::Reader
ok 6 - An object of class 'Forest::Tree' isa 'Forest::Tree'
ok 7 - ... tree is a root
ok 8 - ... tree is a leaf
ok 9 - ... tree has no children
ok 10 - ... loaded the tree
ok 11 - ... tree is a root
ok 12 - ... tree is not a leaf
ok 13 - ... tree has 4 children
ok 14 - ... got the right node
ok 15 - ... got the right node
ok 16 - ... got the right node
ok 17 - ... got the right node
ok 18 - ... got the right node
ok 19 - ... got the right node
ok 20 - ... got the right node
ok 21 - ... got the right node
ok 22 - ... got the right node
ok 23 - ... got the right node
ok
t/021_Tree_Reader_using_load.t .........
1..23
ok 1 - use Forest::Tree;
ok 2 - use Forest::Tree::Reader;
ok 3 - use Forest::Tree::Reader::SimpleTextFile;
ok 4 - An object of class 'Forest::Tree::Reader::SimpleTextFile' isa 'Forest::Tree::Reader::SimpleTextFile'
ok 5 - ... loader does Forest::Tree::Reader
ok 6 - An object of class 'Forest::Tree' isa 'Forest::Tree'
ok 7 - ... tree is a root
ok 8 - ... tree is a leaf
ok 9 - ... tree has no children
ok 10 - ... loaded the tree
ok 11 - ... tree is a root
ok 12 - ... tree is not a leaf
ok 13 - ... tree has 4 children
ok 14 - ... got the right node
ok 15 - ... got the right node
ok 16 - ... got the right node
ok 17 - ... got the right node
ok 18 - ... got the right node
ok 19 - ... got the right node
ok 20 - ... got the right node
ok 21 - ... got the right node
ok 22 - ... got the right node
ok 23 - ... got the right node
ok
t/030_Tree_Writer.t ....................
1..29
ok 1 - use Forest::Tree;
ok 2 - use Forest::Tree::Reader::SimpleTextFile;
ok 3 - use Forest::Tree::Writer;
ok 4 - use Forest::Tree::Writer::SimpleASCII;
ok 5 - use Forest::Tree::Writer::SimpleHTML;
ok 6 - An object of class 'Forest::Tree::Writer::SimpleASCII' isa 'Forest::Tree::Writer::SimpleASCII'
ok 7 - An object of class 'Forest::Tree' isa 'Forest::Tree::Pure'
ok 8 - .... got the right output
ok 9 - An object of class 'Forest::Tree::Writer::SimpleASCII' isa 'Forest::Tree::Writer::SimpleASCII'
ok 10 - An object of class 'Forest::Tree::Pure' isa 'Forest::Tree::Pure'
ok 11 - .... got the right output
ok 12 - An object of class 'Forest::Tree::Writer::SimpleASCII' isa 'Forest::Tree::Writer::SimpleASCII'
ok 13 - An object of class 'Forest::Tree' isa 'Forest::Tree::Pure'
ok 14 - .... got the right output
ok 15 - An object of class 'Forest::Tree::Writer::SimpleASCII' isa 'Forest::Tree::Writer::SimpleASCII'
ok 16 - An object of class 'Forest::Tree::Pure' isa 'Forest::Tree::Pure'
ok 17 - .... got the right output
ok 18 - An object of class 'Forest::Tree::Writer::SimpleHTML' isa 'Forest::Tree::Writer::SimpleHTML'
ok 19 - An object of class 'Forest::Tree' isa 'Forest::Tree::Pure'
ok 20 - .... got the right output
ok 21 - An object of class 'Forest::Tree::Writer::SimpleHTML' isa 'Forest::Tree::Writer::SimpleHTML'
ok 22 - An object of class 'Forest::Tree::Pure' isa 'Forest::Tree::Pure'
ok 23 - .... got the right output
ok 24 - An object of class 'Forest::Tree::Writer::SimpleHTML' isa 'Forest::Tree::Writer::SimpleHTML'
ok 25 - An object of class 'Forest::Tree' isa 'Forest::Tree::Pure'
ok 26 - .... got the right output
ok 27 - An object of class 'Forest::Tree::Writer::SimpleHTML' isa 'Forest::Tree::Writer::SimpleHTML'
ok 28 - An object of class 'Forest::Tree::Pure' isa 'Forest::Tree::Pure'
ok 29 - .... got the right output
ok
t/031_Tree_Writer_to_disk.t ............
1..11
ok 1 - use Forest::Tree;
ok 2 - use Forest::Tree::Reader::SimpleTextFile;
ok 3 - use Forest::Tree::Writer;
ok 4 - use Forest::Tree::Writer::SimpleASCII;
ok 5 - use Forest::Tree::Writer::SimpleHTML;
ok 6 - An object of class 'Forest::Tree::Writer::SimpleASCII' isa 'Forest::Tree::Writer::SimpleASCII'
ok 7 - An object of class 'Forest::Tree' isa 'Forest::Tree'
ok 8 - .... got the right output
ok 9 - An object of class 'Forest::Tree::Writer::SimpleHTML' isa 'Forest::Tree::Writer::SimpleHTML'
ok 10 - An object of class 'Forest::Tree' isa 'Forest::Tree'
ok 11 - .... got the right output
ok
t/032_Tree_Writer_complex_ASCII.t ......
1..9
ok 1 - use Forest::Tree;
ok 2 - use Forest::Tree::Reader::SimpleTextFile;
ok 3 - use Forest::Tree::Writer;
ok 4 - use Forest::Tree::Writer::ASCIIWithBranches;
ok 5 - An object of class 'Forest::Tree::Writer::ASCIIWithBranches' isa 'Forest::Tree::Writer::ASCIIWithBranches'
ok 6 - An object of class 'Forest::Tree' isa 'Forest::Tree'
ok 7 - .... got the right output
ok 8 - An object of class 'Forest::Tree::Writer::ASCIIWithBranches' isa 'Forest::Tree::Writer::ASCIIWithBranches'
ok 9 - .... got the right output
ok
t/033_Tree_Writer_incremental_build.t ..
1..21
ok 1 - use Forest::Tree;
ok 2 - use Forest::Tree::Reader::SimpleTextFile;
ok 3 - use Forest::Tree::Writer;
ok 4 - use Forest::Tree::Writer::SimpleASCII;
ok 5 - use Forest::Tree::Writer::SimpleHTML;
ok 6 - ... correct parental relations
ok 7 - ... correct parental relations
ok 8 - An object of class 'Forest::Tree::Writer::SimpleASCII' isa 'Forest::Tree::Writer::SimpleASCII'
ok 9 - .... got the right output
ok 10 - An object of class 'Forest::Tree::Writer::SimpleASCII' isa 'Forest::Tree::Writer::SimpleASCII'
ok 11 - .... got the right output
ok 12 - An object of class 'Forest::Tree::Writer::SimpleASCII' isa 'Forest::Tree::Writer::SimpleASCII'
ok 13 - .... got the right output
ok 14 - An object of class 'Forest::Tree::Writer::SimpleASCII' isa 'Forest::Tree::Writer::SimpleASCII'
ok 15 - .... got the right output
ok 16 - An object of class 'Forest::Tree::Writer::SimpleASCII' isa 'Forest::Tree::Writer::SimpleASCII'
ok 17 - .... got the right output
ok 18 - An object of class 'Forest::Tree::Writer::SimpleASCII' isa 'Forest::Tree::Writer::SimpleASCII'
ok 19 - .... got the right output
ok 20 - An object of class 'Forest::Tree::Writer::SimpleASCII' isa 'Forest::Tree::Writer::SimpleASCII'
ok 21 - .... got the right output
ok
t/040_Tree_Indexer.t ...................
1..36
ok 1 - use Forest::Tree::Pure;
ok 2 - use Forest::Tree;
ok 3 - use Forest::Tree::Reader::SimpleTextFile;
ok 4 - use Forest::Tree::Indexer;
ok 5 - use Forest::Tree::Indexer::SimpleUIDIndexer;
ok 6 - An object of class 'Forest::Tree::Indexer::SimpleUIDIndexer' isa 'Forest::Tree::Indexer::SimpleUIDIndexer'
ok 7 - ... got the right keys
ok 8 - An object of class 'Forest::Tree::Pure' isa 'Forest::Tree::Pure'
ok 9 - ... indexed by uid
ok 10 - An object of class 'Forest::Tree::Pure' isa 'Forest::Tree::Pure'
ok 11 - ... indexed by uid
ok 12 - An object of class 'Forest::Tree::Reader::SimpleTextFile' isa 'Forest::Tree::Reader::SimpleTextFile'
ok 13 - An object of class 'Forest::Tree::Indexer::SimpleUIDIndexer' isa 'Forest::Tree::Indexer::SimpleUIDIndexer'
ok 14 - ... got the right amount of keys
ok 15 - An object of class 'Forest::Tree' isa 'Forest::Tree'
ok 16 - ... indexed by uid
ok 17 - An object of class 'Forest::Tree' isa 'Forest::Tree'
ok 18 - ... indexed by uid
ok 19 - An object of class 'Forest::Tree' isa 'Forest::Tree'
ok 20 - ... indexed by uid
ok 21 - An object of class 'Forest::Tree' isa 'Forest::Tree'
ok 22 - ... indexed by uid
ok 23 - An object of class 'Forest::Tree' isa 'Forest::Tree'
ok 24 - ... indexed by uid
ok 25 - An object of class 'Forest::Tree' isa 'Forest::Tree'
ok 26 - ... indexed by uid
ok 27 - An object of class 'Forest::Tree' isa 'Forest::Tree'
ok 28 - ... indexed by uid
ok 29 - An object of class 'Forest::Tree' isa 'Forest::Tree'
ok 30 - ... indexed by uid
ok 31 - An object of class 'Forest::Tree' isa 'Forest::Tree'
ok 32 - ... indexed by uid
ok 33 - An object of class 'Forest::Tree' isa 'Forest::Tree'
ok 34 - ... indexed by uid
ok 35 - An object of class 'Forest::Tree' isa 'Forest::Tree'
ok 36 - ... indexed by uid
ok
t/041_Tree_Indexer_w_custom_reader.t ...
1..29
ok 1 - use Forest::Tree;
ok 2 - use Forest::Tree::Reader::SimpleTextFile;
ok 3 - use Forest::Tree::Indexer;
ok 4 - use Forest::Tree::Indexer::SimpleUIDIndexer;
ok 5 - An object of class 'My::Tree::Reader' isa 'My::Tree::Reader'
ok 6 - An object of class 'My::Tree::Reader' isa 'Forest::Tree::Reader::SimpleTextFile'
ok 7 - An object of class 'Forest::Tree::Indexer::SimpleUIDIndexer' isa 'Forest::Tree::Indexer::SimpleUIDIndexer'
ok 8 - ... got the right amount of keys
ok 9 - An object of class 'Forest::Tree' isa 'Forest::Tree'
ok 10 - ... got the right key match
ok 11 - An object of class 'Forest::Tree' isa 'Forest::Tree'
ok 12 - An object of class 'Forest::Tree' isa 'Forest::Tree'
ok 13 - ... got the right key match
ok 14 - An object of class 'Forest::Tree' isa 'Forest::Tree'
ok 15 - ... got the right key match
ok 16 - An object of class 'Forest::Tree' isa 'Forest::Tree'
ok 17 - ... got the right key match
ok 18 - An object of class 'Forest::Tree' isa 'Forest::Tree'
ok 19 - ... got the right key match
ok 20 - An object of class 'Forest::Tree' isa 'Forest::Tree'
ok 21 - ... got the right key match
ok 22 - An object of class 'Forest::Tree' isa 'Forest::Tree'
ok 23 - ... got the right key match
ok 24 - An object of class 'Forest::Tree' isa 'Forest::Tree'
ok 25 - ... got the right key match
ok 26 - An object of class 'Forest::Tree' isa 'Forest::Tree'
ok 27 - ... got the right key match
ok 28 - An object of class 'Forest::Tree' isa 'Forest::Tree'
ok 29 - ... got the right key match
ok
t/060_Tree_Loader.t ....................
1..23
ok 1 - use Forest::Tree;
ok 2 - use Forest::Tree::Loader;
ok 3 - use Forest::Tree::Loader::SimpleUIDLoader;
ok 4 - An object of class 'Forest::Tree::Loader::SimpleUIDLoader' isa 'Forest::Tree::Loader::SimpleUIDLoader'
ok 5 - ... loader does Forest::Tree::Loader
ok 6 - An object of class 'Forest::Tree' isa 'Forest::Tree'
ok 7 - ... tree is a root
ok 8 - ... tree is a leaf
ok 9 - ... tree has no children
ok 10 - ... loaded the tree
ok 11 - ... tree is a root
ok 12 - ... tree is not a leaf
ok 13 - ... tree has 4 children
ok 14 - ... got the right node
ok 15 - ... got the right node
ok 16 - ... got the right node
ok 17 - ... got the right node
ok 18 - ... got the right node
ok 19 - ... got the right node
ok 20 - ... got the right node
ok 21 - ... got the right node
ok 22 - ... got the right node
ok 23 - ... got the right node
ok
t/061_Tree_Loader_with_metadata.t ......
1..30
ok 1 - use Forest::Tree;
ok 2 - use Forest::Tree::Loader;
ok 3 - use Forest::Tree::Loader::SimpleUIDLoader;
ok 4 - An object of class 'My::Tree::Loader::WithMetaData' isa 'My::Tree::Loader::WithMetaData'
ok 5 - An object of class 'My::Tree::Loader::WithMetaData' isa 'Forest::Tree::Loader::SimpleUIDLoader'
ok 6 - ... loader does Forest::Tree::Loader
ok 7 - ... loader does LoadWithMetaData
ok 8 - An object of class 'My::Tree' isa 'My::Tree'
ok 9 - An object of class 'My::Tree' isa 'Forest::Tree'
ok 10 - ... tree is a root
ok 11 - ... tree is a leaf
ok 12 - ... tree has no children
ok 13 - ... loaded the tree
ok 14 - ... tree is a root
ok 15 - ... tree is not a leaf
ok 16 - ... tree has 4 children
ok 17 - ... got the right node
ok 18 - ... got the right metadata
ok 19 - ... got the right node
ok 20 - ... got the right node
ok 21 - ... got the right node
ok 22 - ... got the right node
ok 23 - ... got the right metadata
ok 24 - ... got the right node
ok 25 - ... got the right node
ok 26 - ... got the right metadata
ok 27 - ... got the right node
ok 28 - ... got the right metadata
ok 29 - ... got the right node
ok 30 - ... got the right node
ok
t/pod.t ................................
1..21
ok 1 - POD test for blib/lib/Forest.pm
ok 2 - POD test for blib/lib/Forest/Tree.pm
ok 3 - POD test for blib/lib/Forest/Tree/Loader.pm
ok 4 - POD test for blib/lib/Forest/Tree/Writer.pm
ok 5 - POD test for blib/lib/Forest/Tree/Indexer.pm
ok 6 - POD test for blib/lib/Forest/Tree/Pure.pm
ok 7 - POD test for blib/lib/Forest/Tree/Constructor.pm
ok 8 - POD test for blib/lib/Forest/Tree/Reader.pm
ok 9 - POD test for blib/lib/Forest/Tree/Builder.pm
ok 10 - POD test for blib/lib/Forest/Tree/Builder/Callback.pm
ok 11 - POD test for blib/lib/Forest/Tree/Builder/SimpleTextFile.pm
ok 12 - POD test for blib/lib/Forest/Tree/Roles/JSONable.pm
ok 13 - POD test for blib/lib/Forest/Tree/Roles/LoadWithMetaData.pm
ok 14 - POD test for blib/lib/Forest/Tree/Roles/HasNodeFormatter.pm
ok 15 - POD test for blib/lib/Forest/Tree/Roles/MetaData.pm
ok 16 - POD test for blib/lib/Forest/Tree/Indexer/SimpleUIDIndexer.pm
ok 17 - POD test for blib/lib/Forest/Tree/Loader/SimpleUIDLoader.pm
ok 18 - POD test for blib/lib/Forest/Tree/Reader/SimpleTextFile.pm
ok 19 - POD test for blib/lib/Forest/Tree/Writer/ASCIIWithBranches.pm
ok 20 - POD test for blib/lib/Forest/Tree/Writer/SimpleHTML.pm
ok 21 - POD test for blib/lib/Forest/Tree/Writer/SimpleASCII.pm
ok
All tests successful.
Files=17, Tests=472, 5 wallclock secs ( 0.20 usr 0.04 sys + 4.36 cusr 0.44 csys = 5.04 CPU)
Result: PASS
make[1]: Leaving directory '/<<PKGBUILDDIR>>'
create-stamp debian/debhelper-build-stamp
dh_prep
dh_auto_install --destdir=debian/libforest-perl/
make -j4 install DESTDIR=/<<PKGBUILDDIR>>/debian/libforest-perl AM_UPDATE_INFO_DIR=no PREFIX=/usr
make[1]: Entering directory '/<<PKGBUILDDIR>>'
Manifying 21 pod documents
Installing /<<PKGBUILDDIR>>/debian/libforest-perl/usr/share/perl5/Forest.pm
Installing /<<PKGBUILDDIR>>/debian/libforest-perl/usr/share/perl5/Forest/Tree.pm
Installing /<<PKGBUILDDIR>>/debian/libforest-perl/usr/share/perl5/Forest/Tree/Loader.pm
Installing /<<PKGBUILDDIR>>/debian/libforest-perl/usr/share/perl5/Forest/Tree/Writer.pm
Installing /<<PKGBUILDDIR>>/debian/libforest-perl/usr/share/perl5/Forest/Tree/Indexer.pm
Installing /<<PKGBUILDDIR>>/debian/libforest-perl/usr/share/perl5/Forest/Tree/Pure.pm
Installing /<<PKGBUILDDIR>>/debian/libforest-perl/usr/share/perl5/Forest/Tree/Constructor.pm
Installing /<<PKGBUILDDIR>>/debian/libforest-perl/usr/share/perl5/Forest/Tree/Reader.pm
Installing /<<PKGBUILDDIR>>/debian/libforest-perl/usr/share/perl5/Forest/Tree/Builder.pm
Installing /<<PKGBUILDDIR>>/debian/libforest-perl/usr/share/perl5/Forest/Tree/Builder/Callback.pm
Installing /<<PKGBUILDDIR>>/debian/libforest-perl/usr/share/perl5/Forest/Tree/Builder/SimpleTextFile.pm
Installing /<<PKGBUILDDIR>>/debian/libforest-perl/usr/share/perl5/Forest/Tree/Roles/JSONable.pm
Installing /<<PKGBUILDDIR>>/debian/libforest-perl/usr/share/perl5/Forest/Tree/Roles/LoadWithMetaData.pm
Installing /<<PKGBUILDDIR>>/debian/libforest-perl/usr/share/perl5/Forest/Tree/Roles/HasNodeFormatter.pm
Installing /<<PKGBUILDDIR>>/debian/libforest-perl/usr/share/perl5/Forest/Tree/Roles/MetaData.pm
Installing /<<PKGBUILDDIR>>/debian/libforest-perl/usr/share/perl5/Forest/Tree/Indexer/SimpleUIDIndexer.pm
Installing /<<PKGBUILDDIR>>/debian/libforest-perl/usr/share/perl5/Forest/Tree/Loader/SimpleUIDLoader.pm
Installing /<<PKGBUILDDIR>>/debian/libforest-perl/usr/share/perl5/Forest/Tree/Reader/SimpleTextFile.pm
Installing /<<PKGBUILDDIR>>/debian/libforest-perl/usr/share/perl5/Forest/Tree/Writer/ASCIIWithBranches.pm
Installing /<<PKGBUILDDIR>>/debian/libforest-perl/usr/share/perl5/Forest/Tree/Writer/SimpleHTML.pm
Installing /<<PKGBUILDDIR>>/debian/libforest-perl/usr/share/perl5/Forest/Tree/Writer/SimpleASCII.pm
Installing /<<PKGBUILDDIR>>/debian/libforest-perl/usr/share/man/man3/Forest::Tree::Roles::LoadWithMetaData.3pm
Installing /<<PKGBUILDDIR>>/debian/libforest-perl/usr/share/man/man3/Forest::Tree::Roles::MetaData.3pm
Installing /<<PKGBUILDDIR>>/debian/libforest-perl/usr/share/man/man3/Forest::Tree::Writer::ASCIIWithBranches.3pm
Installing /<<PKGBUILDDIR>>/debian/libforest-perl/usr/share/man/man3/Forest.3pm
Installing /<<PKGBUILDDIR>>/debian/libforest-perl/usr/share/man/man3/Forest::Tree::Writer::SimpleASCII.3pm
Installing /<<PKGBUILDDIR>>/debian/libforest-perl/usr/share/man/man3/Forest::Tree::Reader::SimpleTextFile.3pm
Installing /<<PKGBUILDDIR>>/debian/libforest-perl/usr/share/man/man3/Forest::Tree::Roles::JSONable.3pm
Installing /<<PKGBUILDDIR>>/debian/libforest-perl/usr/share/man/man3/Forest::Tree::Loader.3pm
Installing /<<PKGBUILDDIR>>/debian/libforest-perl/usr/share/man/man3/Forest::Tree::Constructor.3pm
Installing /<<PKGBUILDDIR>>/debian/libforest-perl/usr/share/man/man3/Forest::Tree::Indexer::SimpleUIDIndexer.3pm
Installing /<<PKGBUILDDIR>>/debian/libforest-perl/usr/share/man/man3/Forest::Tree::Writer::SimpleHTML.3pm
Installing /<<PKGBUILDDIR>>/debian/libforest-perl/usr/share/man/man3/Forest::Tree::Roles::HasNodeFormatter.3pm
Installing /<<PKGBUILDDIR>>/debian/libforest-perl/usr/share/man/man3/Forest::Tree::Indexer.3pm
Installing /<<PKGBUILDDIR>>/debian/libforest-perl/usr/share/man/man3/Forest::Tree::Writer.3pm
Installing /<<PKGBUILDDIR>>/debian/libforest-perl/usr/share/man/man3/Forest::Tree::Pure.3pm
Installing /<<PKGBUILDDIR>>/debian/libforest-perl/usr/share/man/man3/Forest::Tree::Builder::SimpleTextFile.3pm
Installing /<<PKGBUILDDIR>>/debian/libforest-perl/usr/share/man/man3/Forest::Tree::Reader.3pm
Installing /<<PKGBUILDDIR>>/debian/libforest-perl/usr/share/man/man3/Forest::Tree::Builder::Callback.3pm
Installing /<<PKGBUILDDIR>>/debian/libforest-perl/usr/share/man/man3/Forest::Tree::Builder.3pm
Installing /<<PKGBUILDDIR>>/debian/libforest-perl/usr/share/man/man3/Forest::Tree.3pm
Installing /<<PKGBUILDDIR>>/debian/libforest-perl/usr/share/man/man3/Forest::Tree::Loader::SimpleUIDLoader.3pm
make[1]: Leaving directory '/<<PKGBUILDDIR>>'
dh_installdocs
dh_installchangelogs
dh_installman
dh_perl
dh_link
dh_strip_nondeterminism
dh_compress
dh_fixperms
dh_missing
dh_installdeb
dh_gencontrol
dh_md5sums
dh_builddeb
dpkg-deb: building package 'libforest-perl' in '../libforest-perl_0.10-2_all.deb'.
dpkg-genbuildinfo --build=binary -O../libforest-perl_0.10-2_arm64.buildinfo
dpkg-genchanges --build=binary -O../libforest-perl_0.10-2_arm64.changes
dpkg-genchanges: info: binary-only upload (no source code included)
dpkg-source --after-build .
dpkg-buildpackage: info: binary-only upload (no source included)
--------------------------------------------------------------------------------
Build finished at 2024-11-17T00:17:40Z
Finished
--------
I: Built successfully
+------------------------------------------------------------------------------+
| Changes |
+------------------------------------------------------------------------------+
libforest-perl_0.10-2_arm64.changes:
------------------------------------
Format: 1.8
Date: Tue, 14 Jun 2022 21:35:18 +0100
Source: libforest-perl
Binary: libforest-perl
Architecture: all
Version: 0.10-2
Distribution: sid
Urgency: medium
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Changed-By: Jelmer Vernooij <jelmer@debian.org>
Description:
libforest-perl - collection of N-ary tree related modules
Changes:
libforest-perl (0.10-2) unstable; urgency=medium
.
[ gregor herrmann ]
* Strip trailing slash from metacpan URLs.
.
[ Salvatore Bonaccorso ]
* Update Vcs-Browser URL to cgit web frontend
* debian/control: Use HTTPS transport protocol for Vcs-Git URI
.
[ gregor herrmann ]
* debian/copyright: change Copyright-Format 1.0 URL to HTTPS.
* Remove Jonathan Yu from Uploaders. Thanks for your work!
.
[ Salvatore Bonaccorso ]
* Update Vcs-* headers for switch to salsa.debian.org
.
[ Laurent Baillet ]
* fix lintian file-contains-trailing-whitespace warning
.
[ Debian Janitor ]
* Trim trailing whitespace.
* Bump debhelper from deprecated 8 to 12.
* Set debhelper-compat version in Build-Depends.
* Add missing build dependency on libmodule-install-perl.
.
[ gregor herrmann ]
* debian/watch: use uscan version 4.
Checksums-Sha1:
2b9d666ae337653437504bc7f571a4d49f0f1910 47740 libforest-perl_0.10-2_all.deb
f468908bbad7f3ed455d7f99337daa2d57235674 6243 libforest-perl_0.10-2_arm64.buildinfo
Checksums-Sha256:
224cf31ac259495732b6cd8a533539f9d89bdd9dd94526415fa1fb94bff8eda5 47740 libforest-perl_0.10-2_all.deb
c378c5425f24f9affde408fcdb2ddd633eceb47c467d44bdbcdd74d6336017c7 6243 libforest-perl_0.10-2_arm64.buildinfo
Files:
5b23145edff1fbd93f1d16556995ddaf 47740 perl optional libforest-perl_0.10-2_all.deb
6e6a33eb5f7e1e6e629199ac89643e36 6243 perl optional libforest-perl_0.10-2_arm64.buildinfo
+------------------------------------------------------------------------------+
| Buildinfo |
+------------------------------------------------------------------------------+
Format: 1.0
Source: libforest-perl
Binary: libforest-perl
Architecture: all
Version: 0.10-2
Checksums-Md5:
5b23145edff1fbd93f1d16556995ddaf 47740 libforest-perl_0.10-2_all.deb
Checksums-Sha1:
2b9d666ae337653437504bc7f571a4d49f0f1910 47740 libforest-perl_0.10-2_all.deb
Checksums-Sha256:
224cf31ac259495732b6cd8a533539f9d89bdd9dd94526415fa1fb94bff8eda5 47740 libforest-perl_0.10-2_all.deb
Build-Origin: Debian
Build-Architecture: arm64
Build-Date: Sun, 17 Nov 2024 00:17:39 +0000
Build-Path: /<<PKGBUILDDIR>>
Build-Tainted-By:
merged-usr-via-aliased-dirs
Installed-Build-Depends:
autoconf (= 2.72-3),
automake (= 1:1.16.5-1.3),
autopoint (= 0.22.5-2),
autotools-dev (= 20220109.1),
base-files (= 13.5),
base-passwd (= 3.6.5),
bash (= 5.2.32-1+b2),
binutils (= 2.43.1-5),
binutils-aarch64-linux-gnu (= 2.43.1-5),
binutils-common (= 2.43.1-5),
bsdextrautils (= 2.40.2-11),
bsdutils (= 1:2.40.2-11),
build-essential (= 12.12),
bzip2 (= 1.0.8-6),
coreutils (= 9.5-1+b1),
cpp (= 4:14.2.0-1),
cpp-14 (= 14.2.0-8),
cpp-14-aarch64-linux-gnu (= 14.2.0-8),
cpp-aarch64-linux-gnu (= 4:14.2.0-1),
dash (= 0.5.12-9+b1),
debconf (= 1.5.87),
debhelper (= 13.20),
debianutils (= 5.21),
dh-autoreconf (= 20),
dh-strip-nondeterminism (= 1.14.0-1),
diffutils (= 1:3.10-1+b1),
dpkg (= 1.22.12~1.gbp82cafd),
dpkg-dev (= 1.22.12~1.gbp82cafd),
dwz (= 0.15-1+b1),
file (= 1:5.45-3+b1),
findutils (= 4.10.0-3),
g++ (= 4:14.2.0-1),
g++-14 (= 14.2.0-8),
g++-14-aarch64-linux-gnu (= 14.2.0-8),
g++-aarch64-linux-gnu (= 4:14.2.0-1),
gcc (= 4:14.2.0-1),
gcc-14 (= 14.2.0-8),
gcc-14-aarch64-linux-gnu (= 14.2.0-8),
gcc-14-base (= 14.2.0-8),
gcc-aarch64-linux-gnu (= 4:14.2.0-1),
gettext (= 0.22.5-2),
gettext-base (= 0.22.5-2),
grep (= 3.11-4+b1),
groff-base (= 1.23.0-5),
gzip (= 1.12-1.1+b1),
hostname (= 3.25),
init-system-helpers (= 1.67),
intltool-debian (= 0.35.0+20060710.6),
libacl1 (= 2.3.2-2+b1),
libalgorithm-c3-perl (= 0.11-2),
libarchive-zip-perl (= 1.68-1),
libasan8 (= 14.2.0-8),
libatomic1 (= 14.2.0-8),
libattr1 (= 1:2.5.2-2),
libaudit-common (= 1:4.0.2-2),
libaudit1 (= 1:4.0.2-2),
libb-hooks-endofscope-perl (= 0.28-1),
libb-hooks-op-check-perl (= 0.22-3+b2),
libbinutils (= 2.43.1-5),
libblkid1 (= 2.40.2-11),
libbz2-1.0 (= 1.0.8-6),
libc-bin (= 2.40-3),
libc-dev-bin (= 2.40-3),
libc6 (= 2.40-3),
libc6-dev (= 2.40-3),
libcap-ng0 (= 0.8.5-3+b1),
libcap2 (= 1:2.66-5+b1),
libcc1-0 (= 14.2.0-8),
libclass-c3-perl (= 0.35-2),
libclass-load-perl (= 0.25-2),
libclass-load-xs-perl (= 0.10-2+b4),
libcrypt-dev (= 1:4.4.36-5),
libcrypt1 (= 1:4.4.36-5),
libctf-nobfd0 (= 2.43.1-5),
libctf0 (= 2.43.1-5),
libdata-optlist-perl (= 0.114-1),
libdata-visitor-perl (= 0.32-1),
libdb5.3t64 (= 5.3.28+dfsg2-9),
libdebconfclient0 (= 0.273),
libdebhelper-perl (= 13.20),
libdevel-callchecker-perl (= 0.009-1+b1),
libdevel-globaldestruction-perl (= 0.14-4),
libdevel-overloadinfo-perl (= 0.007-1),
libdevel-stacktrace-perl (= 2.0500-1),
libdist-checkconflicts-perl (= 0.11-2),
libdpkg-perl (= 1.22.12~1.gbp82cafd),
libdynaloader-functions-perl (= 0.004-1),
libelf1t64 (= 0.192-4),
libeval-closure-perl (= 0.14-3),
libfile-remove-perl (= 1.61-2),
libfile-stripnondeterminism-perl (= 1.14.0-1),
libgcc-14-dev (= 14.2.0-8),
libgcc-s1 (= 14.2.0-8),
libgdbm-compat4t64 (= 1.24-2),
libgdbm6t64 (= 1.24-2),
libgmp10 (= 2:6.3.0+dfsg-2+b2),
libgomp1 (= 14.2.0-8),
libgprofng0 (= 2.43.1-5),
libhwasan0 (= 14.2.0-8),
libicu72 (= 72.1-5+b1),
libisl23 (= 0.27-1),
libitm1 (= 14.2.0-8),
libjansson4 (= 2.14-2+b3),
liblsan0 (= 14.2.0-8),
liblzma5 (= 5.6.3-1+b1),
libmagic-mgc (= 1:5.45-3+b1),
libmagic1t64 (= 1:5.45-3+b1),
libmd0 (= 1.1.0-2+b1),
libmodule-implementation-perl (= 0.09-2),
libmodule-install-perl (= 1.21-2),
libmodule-runtime-conflicts-perl (= 0.003-2),
libmodule-runtime-perl (= 0.016-2),
libmodule-scandeps-perl (= 1.35-1),
libmoose-perl (= 2.2207-1+b2),
libmoosex-clone-perl (= 0.06-3),
libmount1 (= 2.40.2-11),
libmpc3 (= 1.3.1-1+b3),
libmpfr6 (= 4.2.1-1+b2),
libmro-compat-perl (= 0.15-2),
libnamespace-autoclean-perl (= 0.31-1),
libnamespace-clean-perl (= 0.27-2),
libpackage-deprecationmanager-perl (= 0.18-1),
libpackage-stash-perl (= 0.40-1),
libpackage-stash-xs-perl (= 0.30-1+b4),
libpam-modules (= 1.5.3-7+b1),
libpam-modules-bin (= 1.5.3-7+b1),
libpam-runtime (= 1.5.3-7),
libpam0g (= 1.5.3-7+b1),
libparams-classify-perl (= 0.015-2+b4),
libparams-util-perl (= 1.102-3+b1),
libpath-class-perl (= 0.37-4),
libpcre2-8-0 (= 10.44-4),
libperl5.40 (= 5.40.0-7),
libpipeline1 (= 1.5.8-1),
libseccomp2 (= 2.5.5-1+b3),
libselinux1 (= 3.7-3+b1),
libsframe1 (= 2.43.1-5),
libsmartcols1 (= 2.40.2-11),
libssl3t64 (= 3.3.2-2),
libstdc++-14-dev (= 14.2.0-8),
libstdc++6 (= 14.2.0-8),
libsub-exporter-perl (= 0.990-1),
libsub-exporter-progressive-perl (= 0.001013-3),
libsub-identify-perl (= 0.14-3+b3),
libsub-install-perl (= 0.929-1),
libsub-name-perl (= 0.27-1+b3),
libsub-uplevel-perl (= 0.2800-3),
libsystemd0 (= 257~rc2-3),
libtest-exception-perl (= 0.43-3),
libtest-pod-perl (= 1.52-3),
libtie-toobject-perl (= 0.03-6),
libtinfo6 (= 6.5-2+b1),
libtool (= 2.4.7-8),
libtry-tiny-perl (= 0.32-1),
libtsan2 (= 14.2.0-8),
libubsan1 (= 14.2.0-8),
libuchardet0 (= 0.0.8-1+b2),
libudev1 (= 257~rc2-3),
libunistring5 (= 1.2-1+b1),
libuuid1 (= 2.40.2-11),
libvariable-magic-perl (= 0.64-1+b1),
libxml2 (= 2.12.7+dfsg+really2.9.14-0.2+b1),
libyaml-tiny-perl (= 1.74-1),
libzstd1 (= 1.5.6+dfsg-1+b1),
linux-libc-dev (= 6.11.7-1),
m4 (= 1.4.19-4),
make (= 4.3-4.1+b1),
man-db (= 2.13.0-1),
mawk (= 1.3.4.20240905-1),
ncurses-base (= 6.5-2),
ncurses-bin (= 6.5-2+b1),
openssl-provider-legacy (= 3.3.2-2),
patch (= 2.7.6-7+b1),
perl (= 5.40.0-7),
perl-base (= 5.40.0-7),
perl-modules-5.40 (= 5.40.0-7),
po-debconf (= 1.0.21+nmu1),
rpcsvc-proto (= 1.4.3-1+b1),
sed (= 4.9-2+b1),
sensible-utils (= 0.0.24),
sysvinit-utils (= 3.11-1),
tar (= 1.35+dfsg-3+b1),
util-linux (= 2.40.2-11),
xz-utils (= 5.6.3-1+b1),
zlib1g (= 1:1.3.dfsg+really1.3.1-1+b1)
Environment:
DEB_BUILD_OPTIONS="parallel=4"
LANG="en_US.UTF-8"
LC_ALL="C.UTF-8"
SOURCE_DATE_EPOCH="1655238918"
+------------------------------------------------------------------------------+
| Package contents |
+------------------------------------------------------------------------------+
libforest-perl_0.10-2_all.deb
-----------------------------
new Debian package, version 2.0.
size 47740 bytes: control archive=1860 bytes.
620 bytes, 14 lines control
3754 bytes, 45 lines md5sums
Package: libforest-perl
Version: 0.10-2
Architecture: all
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Installed-Size: 133
Depends: perl:any, libmoose-perl, libmoosex-clone-perl
Section: perl
Priority: optional
Homepage: https://metacpan.org/release/Forest
Description: collection of N-ary tree related modules
Forest is a collection of Perl modules implementing a generalized N-ary tree
data structure. It also includes several modules useful for manipulating this
data, including loading data from file, indexing it in memory, and writing it
back out to files (in various formats).
drwxr-xr-x root/root 0 2022-06-14 20:35 ./
drwxr-xr-x root/root 0 2022-06-14 20:35 ./usr/
drwxr-xr-x root/root 0 2022-06-14 20:35 ./usr/share/
drwxr-xr-x root/root 0 2022-06-14 20:35 ./usr/share/doc/
drwxr-xr-x root/root 0 2022-06-14 20:35 ./usr/share/doc/libforest-perl/
-rw-r--r-- root/root 1373 2022-06-14 20:35 ./usr/share/doc/libforest-perl/changelog.Debian.gz
-rw-r--r-- root/root 1270 2013-12-18 13:16 ./usr/share/doc/libforest-perl/changelog.gz
-rw-r--r-- root/root 1301 2022-06-14 20:35 ./usr/share/doc/libforest-perl/copyright
drwxr-xr-x root/root 0 2022-06-14 20:35 ./usr/share/man/
drwxr-xr-x root/root 0 2022-06-14 20:35 ./usr/share/man/man3/
-rw-r--r-- root/root 1905 2022-06-14 20:35 ./usr/share/man/man3/Forest.3pm.gz
-rw-r--r-- root/root 2304 2022-06-14 20:35 ./usr/share/man/man3/Forest::Tree.3pm.gz
-rw-r--r-- root/root 1722 2022-06-14 20:35 ./usr/share/man/man3/Forest::Tree::Builder.3pm.gz
-rw-r--r-- root/root 1165 2022-06-14 20:35 ./usr/share/man/man3/Forest::Tree::Builder::Callback.3pm.gz
-rw-r--r-- root/root 1516 2022-06-14 20:35 ./usr/share/man/man3/Forest::Tree::Builder::SimpleTextFile.3pm.gz
-rw-r--r-- root/root 1318 2022-06-14 20:35 ./usr/share/man/man3/Forest::Tree::Constructor.3pm.gz
-rw-r--r-- root/root 1328 2022-06-14 20:35 ./usr/share/man/man3/Forest::Tree::Indexer.3pm.gz
-rw-r--r-- root/root 1230 2022-06-14 20:35 ./usr/share/man/man3/Forest::Tree::Indexer::SimpleUIDIndexer.3pm.gz
-rw-r--r-- root/root 1248 2022-06-14 20:35 ./usr/share/man/man3/Forest::Tree::Loader.3pm.gz
-rw-r--r-- root/root 1185 2022-06-14 20:35 ./usr/share/man/man3/Forest::Tree::Loader::SimpleUIDLoader.3pm.gz
-rw-r--r-- root/root 3351 2022-06-14 20:35 ./usr/share/man/man3/Forest::Tree::Pure.3pm.gz
-rw-r--r-- root/root 1361 2022-06-14 20:35 ./usr/share/man/man3/Forest::Tree::Reader.3pm.gz
-rw-r--r-- root/root 1368 2022-06-14 20:35 ./usr/share/man/man3/Forest::Tree::Reader::SimpleTextFile.3pm.gz
-rw-r--r-- root/root 1174 2022-06-14 20:35 ./usr/share/man/man3/Forest::Tree::Roles::HasNodeFormatter.3pm.gz
-rw-r--r-- root/root 1310 2022-06-14 20:35 ./usr/share/man/man3/Forest::Tree::Roles::JSONable.3pm.gz
-rw-r--r-- root/root 1223 2022-06-14 20:35 ./usr/share/man/man3/Forest::Tree::Roles::LoadWithMetaData.3pm.gz
-rw-r--r-- root/root 1415 2022-06-14 20:35 ./usr/share/man/man3/Forest::Tree::Roles::MetaData.3pm.gz
-rw-r--r-- root/root 1260 2022-06-14 20:35 ./usr/share/man/man3/Forest::Tree::Writer.3pm.gz
-rw-r--r-- root/root 1327 2022-06-14 20:35 ./usr/share/man/man3/Forest::Tree::Writer::ASCIIWithBranches.3pm.gz
-rw-r--r-- root/root 1225 2022-06-14 20:35 ./usr/share/man/man3/Forest::Tree::Writer::SimpleASCII.3pm.gz
-rw-r--r-- root/root 1234 2022-06-14 20:35 ./usr/share/man/man3/Forest::Tree::Writer::SimpleHTML.3pm.gz
drwxr-xr-x root/root 0 2022-06-14 20:35 ./usr/share/perl5/
-rw-r--r-- root/root 2211 2022-06-14 20:35 ./usr/share/perl5/Forest.pm
drwxr-xr-x root/root 0 2022-06-14 20:35 ./usr/share/perl5/Forest/
-rw-r--r-- root/root 7577 2013-12-18 13:18 ./usr/share/perl5/Forest/Tree.pm
drwxr-xr-x root/root 0 2022-06-14 20:35 ./usr/share/perl5/Forest/Tree/
-rw-r--r-- root/root 2604 2013-12-18 13:18 ./usr/share/perl5/Forest/Tree/Builder.pm
drwxr-xr-x root/root 0 2022-06-14 20:35 ./usr/share/perl5/Forest/Tree/Builder/
-rw-r--r-- root/root 1072 2013-12-18 13:18 ./usr/share/perl5/Forest/Tree/Builder/Callback.pm
-rw-r--r-- root/root 3376 2013-12-18 13:18 ./usr/share/perl5/Forest/Tree/Builder/SimpleTextFile.pm
-rw-r--r-- root/root 2504 2013-12-18 13:18 ./usr/share/perl5/Forest/Tree/Constructor.pm
-rw-r--r-- root/root 1466 2013-12-18 13:18 ./usr/share/perl5/Forest/Tree/Indexer.pm
drwxr-xr-x root/root 0 2022-06-14 20:35 ./usr/share/perl5/Forest/Tree/Indexer/
-rw-r--r-- root/root 1391 2013-12-18 13:18 ./usr/share/perl5/Forest/Tree/Indexer/SimpleUIDIndexer.pm
-rw-r--r-- root/root 1658 2013-12-18 13:18 ./usr/share/perl5/Forest/Tree/Loader.pm
drwxr-xr-x root/root 0 2022-06-14 20:35 ./usr/share/perl5/Forest/Tree/Loader/
-rw-r--r-- root/root 2070 2013-12-18 13:18 ./usr/share/perl5/Forest/Tree/Loader/SimpleUIDLoader.pm
-rw-r--r-- root/root 11734 2022-06-14 20:35 ./usr/share/perl5/Forest/Tree/Pure.pm
-rw-r--r-- root/root 1300 2013-12-18 13:18 ./usr/share/perl5/Forest/Tree/Reader.pm
drwxr-xr-x root/root 0 2022-06-14 20:35 ./usr/share/perl5/Forest/Tree/Reader/
-rw-r--r-- root/root 2605 2013-12-18 13:18 ./usr/share/perl5/Forest/Tree/Reader/SimpleTextFile.pm
drwxr-xr-x root/root 0 2022-06-14 20:35 ./usr/share/perl5/Forest/Tree/Roles/
-rw-r--r-- root/root 1068 2013-12-18 13:18 ./usr/share/perl5/Forest/Tree/Roles/HasNodeFormatter.pm
-rw-r--r-- root/root 999 2013-12-18 13:18 ./usr/share/perl5/Forest/Tree/Roles/JSONable.pm
-rw-r--r-- root/root 1418 2013-12-18 13:18 ./usr/share/perl5/Forest/Tree/Roles/LoadWithMetaData.pm
-rw-r--r-- root/root 1860 2013-12-18 13:18 ./usr/share/perl5/Forest/Tree/Roles/MetaData.pm
-rw-r--r-- root/root 1102 2013-12-18 13:18 ./usr/share/perl5/Forest/Tree/Writer.pm
drwxr-xr-x root/root 0 2022-06-14 20:35 ./usr/share/perl5/Forest/Tree/Writer/
-rw-r--r-- root/root 2091 2013-12-18 13:18 ./usr/share/perl5/Forest/Tree/Writer/ASCIIWithBranches.pm
-rw-r--r-- root/root 1366 2013-12-18 13:18 ./usr/share/perl5/Forest/Tree/Writer/SimpleASCII.pm
-rw-r--r-- root/root 1356 2013-12-18 13:18 ./usr/share/perl5/Forest/Tree/Writer/SimpleHTML.pm
lintian
-------
Setup apt archive
-----------------
Merged Build-Depends: lintian
Filtered Build-Depends: lintian
dpkg-deb: warning: root directory has unusual owner or group 998:999.
Hint: either pass --root-owner-group, see dpkg-build-api(7) or add an explicit 'Rules-Requires-Root: no' in debian/control.
dpkg-deb: warning: ignoring 1 warning about the control file(s)
dpkg-deb: building package 'sbuild-build-depends-lintian-dummy' in '/<<RESOLVERDIR>>/apt_archive/sbuild-build-depends-lintian-dummy.deb'.
Ign:1 copy:/<<RESOLVERDIR>>/apt_archive ./ InRelease
Get:2 copy:/<<RESOLVERDIR>>/apt_archive ./ Release [615 B]
Ign:3 copy:/<<RESOLVERDIR>>/apt_archive ./ Release.gpg
Get:4 copy:/<<RESOLVERDIR>>/apt_archive ./ Sources [1348 B]
Get:5 copy:/<<RESOLVERDIR>>/apt_archive ./ Packages [1390 B]
Fetched 3353 B in 0s (260 kB/s)
Reading package lists...
Get:1 file:/<<BUILDDIR>>/resolver-MM0Mzo/apt_archive ./ InRelease
Ign:1 file:/<<BUILDDIR>>/resolver-MM0Mzo/apt_archive ./ InRelease
Get:2 file:/<<BUILDDIR>>/resolver-MM0Mzo/apt_archive ./ Release [606 B]
Get:2 file:/<<BUILDDIR>>/resolver-MM0Mzo/apt_archive ./ Release [606 B]
Get:3 file:/<<BUILDDIR>>/resolver-MM0Mzo/apt_archive ./ Release.gpg
Ign:3 file:/<<BUILDDIR>>/resolver-MM0Mzo/apt_archive ./ Release.gpg
Reading package lists...
Reading package lists...
Install lintian build dependencies (apt-based resolver)
-------------------------------------------------------
Installing build dependencies
Reading package lists...
Building dependency tree...
Reading state information...
The following NEW packages will be installed:
sbuild-build-depends-lintian-dummy
0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded.
Need to get 856 B of archives.
After this operation, 0 B of additional disk space will be used.
Get:1 copy:/<<RESOLVERDIR>>/apt_archive ./ sbuild-build-depends-lintian-dummy 0.invalid.0 [856 B]
debconf: delaying package configuration, since apt-utils is not installed
Fetched 856 B in 0s (0 B/s)
Selecting previously unselected package sbuild-build-depends-lintian-dummy.
(Reading database ... 23434 files and directories currently installed.)
Preparing to unpack .../sbuild-build-depends-lintian-dummy_0.invalid.0_arm64.deb ...
Unpacking sbuild-build-depends-lintian-dummy (0.invalid.0) ...
Setting up sbuild-build-depends-lintian-dummy (0.invalid.0) ...
Running lintian...
W: libforest-perl changes: distribution-and-changes-mismatch sid unstable
W: libforest-perl source: no-nmu-in-changelog [debian/changelog:1]
W: libforest-perl source: source-nmu-has-incorrect-version-number 0.10-2 [debian/changelog:1]
I: Lintian run was successful.
+------------------------------------------------------------------------------+
| Post Build |
+------------------------------------------------------------------------------+
+------------------------------------------------------------------------------+
| Cleanup |
+------------------------------------------------------------------------------+
Purging /<<BUILDDIR>>
Not cleaning session: cloned chroot in use
+------------------------------------------------------------------------------+
| Summary |
+------------------------------------------------------------------------------+
Build Architecture: arm64
Build Type: binary
Build-Space: 1080
Build-Time: 11
Distribution: sid
Host Architecture: arm64
Install-Time: 19
Job: /tmp/debusine-fetch-exec-upload-qo12yvuq/libforest-perl_0.10-2.dsc
Lintian: warn
Machine Architecture: arm64
Package: libforest-perl
Package-Time: 65
Source-Version: 0.10-2
Space: 1080
Status: successful
Version: 0.10-2
--------------------------------------------------------------------------------
Finished at 2024-11-17T00:17:40Z
Build needed 00:01:05, 1080k disk space