sbuild (Debian sbuild) 0.86.3~bpo12+1 (03 November 2024) on debusine-worker-arm64-demeter-02.freexian.com
+==============================================================================+
| libfreehand 0.1.2-3 (arm64) Sun, 17 Nov 2024 00:19:33 +0000 |
+==============================================================================+
Package: libfreehand
Version: 0.1.2-3
Source Version: 0.1.2-3
Distribution: sid
Machine Architecture: arm64
Host Architecture: arm64
Build Architecture: arm64
Build Type: binary
I: No tarballs found in /var/lib/debusine/worker/.cache/sbuild
Unpacking /var/lib/debusine/worker/system-images/957781/system.tar.xz to /tmp/tmp.sbuild.nn2ZapuVKL...
I: NOTICE: Log filtering will replace 'sbuild-unshare-dummy-location' with '<<CHROOT>>'
+------------------------------------------------------------------------------+
| Chroot Setup Commands |
+------------------------------------------------------------------------------+
rm -f /etc/resolv.conf
----------------------
I: Finished running 'rm -f /etc/resolv.conf'.
Finished processing commands.
--------------------------------------------------------------------------------
Copying /tmp/debusine-fetch-exec-upload-8sx5319d/dpkg-dbgsym_1.22.12~1.gbp82cafd_arm64.deb to /<<CHROOT>>...
Copying /tmp/debusine-fetch-exec-upload-8sx5319d/dpkg_1.22.12~1.gbp82cafd_arm64.deb to /<<CHROOT>>...
Copying /tmp/debusine-fetch-exec-upload-8sx5319d/dselect-dbgsym_1.22.12~1.gbp82cafd_arm64.deb to /<<CHROOT>>...
Copying /tmp/debusine-fetch-exec-upload-8sx5319d/dselect_1.22.12~1.gbp82cafd_arm64.deb to /<<CHROOT>>...
Copying /tmp/debusine-fetch-exec-upload-8sx5319d/libdpkg-dev_1.22.12~1.gbp82cafd_arm64.deb to /<<CHROOT>>...
Copying /tmp/debusine-fetch-exec-upload-8sx5319d/dpkg-dev_1.22.12~1.gbp82cafd_all.deb to /<<CHROOT>>...
Copying /tmp/debusine-fetch-exec-upload-8sx5319d/libdpkg-perl_1.22.12~1.gbp82cafd_all.deb to /<<CHROOT>>...
I: NOTICE: Log filtering will replace 'build/libfreehand-kbrv4f/resolver-jPFZmg' with '<<RESOLVERDIR>>'
+------------------------------------------------------------------------------+
| Update chroot |
+------------------------------------------------------------------------------+
Get:1 file:/build/libfreehand-kbrv4f/resolver-8f6fXv/apt_archive ./ InRelease
Ign:1 file:/build/libfreehand-kbrv4f/resolver-8f6fXv/apt_archive ./ InRelease
Get:2 file:/build/libfreehand-kbrv4f/resolver-8f6fXv/apt_archive ./ Release [606 B]
Get:2 file:/build/libfreehand-kbrv4f/resolver-8f6fXv/apt_archive ./ Release [606 B]
Get:3 http://deb.debian.org/debian sid InRelease [202 kB]
Get:4 file:/build/libfreehand-kbrv4f/resolver-8f6fXv/apt_archive ./ Release.gpg
Ign:4 file:/build/libfreehand-kbrv4f/resolver-8f6fXv/apt_archive ./ Release.gpg
Get:5 file:/build/libfreehand-kbrv4f/resolver-8f6fXv/apt_archive ./ Packages [9246 B]
Get:6 http://deb.debian.org/debian sid/main arm64 Packages [9952 kB]
Get:7 http://deb.debian.org/debian sid/main arm64 Components [4909 kB]
Fetched 15.1 MB in 2s (6299 kB/s)
Reading package lists...
Reading package lists...
Building dependency tree...
Reading state information...
Calculating upgrade...
The following packages will be upgraded:
apt bsdextrautils bsdutils debianutils dpkg dpkg-dev libapt-pkg6.0t64
libaudit-common libaudit1 libblkid1 libbrotli1 libcap-ng0 libdpkg-perl
libglib2.0-0t64 libmarkdown2 libmount1 libpcre2-8-0 libseccomp2 libselinux1
libsemanage2 libsmartcols1 libsystemd0 libudev1 libuuid1 libxml2 login
login.defs mount passwd util-linux
30 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
Need to get 9274 kB/12.8 MB of archives.
After this operation, 603 kB disk space will be freed.
Get:1 http://deb.debian.org/debian sid/main arm64 bsdutils arm64 1:2.40.2-11 [104 kB]
Get:2 file:/build/libfreehand-kbrv4f/resolver-8f6fXv/apt_archive ./ dpkg 1.22.12~1.gbp82cafd [1513 kB]
Get:3 file:/build/libfreehand-kbrv4f/resolver-8f6fXv/apt_archive ./ dpkg-dev 1.22.12~1.gbp82cafd [1337 kB]
Get:4 http://deb.debian.org/debian sid/main arm64 debianutils arm64 5.21 [92.1 kB]
Get:5 http://deb.debian.org/debian sid/main arm64 libsystemd0 arm64 257~rc2-3 [416 kB]
Get:6 file:/build/libfreehand-kbrv4f/resolver-8f6fXv/apt_archive ./ libdpkg-perl 1.22.12~1.gbp82cafd [647 kB]
Get:7 http://deb.debian.org/debian sid/main arm64 libudev1 arm64 257~rc2-3 [139 kB]
Get:8 http://deb.debian.org/debian sid/main arm64 libapt-pkg6.0t64 arm64 2.9.11 [921 kB]
Get:9 http://deb.debian.org/debian sid/main arm64 bsdextrautils arm64 2.40.2-11 [91.2 kB]
Get:10 http://deb.debian.org/debian sid/main arm64 libblkid1 arm64 2.40.2-11 [162 kB]
Get:11 http://deb.debian.org/debian sid/main arm64 libmount1 arm64 2.40.2-11 [190 kB]
Get:12 http://deb.debian.org/debian sid/main arm64 libsmartcols1 arm64 2.40.2-11 [135 kB]
Get:13 http://deb.debian.org/debian sid/main arm64 mount arm64 2.40.2-11 [153 kB]
Get:14 http://deb.debian.org/debian sid/main arm64 libuuid1 arm64 2.40.2-11 [35.7 kB]
Get:15 http://deb.debian.org/debian sid/main arm64 util-linux arm64 2.40.2-11 [1170 kB]
Get:16 http://deb.debian.org/debian sid/main arm64 libpcre2-8-0 arm64 10.44-4 [243 kB]
Get:17 http://deb.debian.org/debian sid/main arm64 libselinux1 arm64 3.7-3+b1 [72.1 kB]
Get:18 http://deb.debian.org/debian sid/main arm64 libseccomp2 arm64 2.5.5-1+b3 [46.8 kB]
Get:19 http://deb.debian.org/debian sid/main arm64 apt arm64 2.9.11 [1287 kB]
Get:20 http://deb.debian.org/debian sid/main arm64 libaudit-common all 1:4.0.2-2 [12.7 kB]
Get:21 http://deb.debian.org/debian sid/main arm64 libcap-ng0 arm64 0.8.5-3+b1 [17.0 kB]
Get:22 http://deb.debian.org/debian sid/main arm64 libaudit1 arm64 1:4.0.2-2 [54.2 kB]
Get:23 http://deb.debian.org/debian sid/main arm64 login arm64 1:4.16.0-2+really2.40.2-11 [80.0 kB]
Get:24 http://deb.debian.org/debian sid/main arm64 login.defs all 1:4.16.0-5 [185 kB]
Get:25 http://deb.debian.org/debian sid/main arm64 libsemanage2 arm64 3.7-2+b1 [84.5 kB]
Get:26 http://deb.debian.org/debian sid/main arm64 passwd arm64 1:4.16.0-5 [1210 kB]
Get:27 http://deb.debian.org/debian sid/main arm64 libbrotli1 arm64 1.1.0-2+b6 [297 kB]
Get:28 http://deb.debian.org/debian sid/main arm64 libglib2.0-0t64 arm64 2.82.2-3 [1411 kB]
Get:29 http://deb.debian.org/debian sid/main arm64 libmarkdown2 arm64 2.2.7-2.1 [33.1 kB]
Get:30 http://deb.debian.org/debian sid/main arm64 libxml2 arm64 2.12.7+dfsg+really2.9.14-0.2+b1 [630 kB]
debconf: delaying package configuration, since apt-utils is not installed
Fetched 9274 kB in 0s (59.1 MB/s)
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 17129 files and directories currently installed.)
Preparing to unpack .../bsdutils_1%3a2.40.2-11_arm64.deb ...
Unpacking bsdutils (1:2.40.2-11) over (1:2.40.2-10) ...
Setting up bsdutils (1:2.40.2-11) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 17129 files and directories currently installed.)
Preparing to unpack .../debianutils_5.21_arm64.deb ...
Unpacking debianutils (5.21) over (5.20+b1) ...
Setting up debianutils (5.21) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 17128 files and directories currently installed.)
Preparing to unpack .../libsystemd0_257~rc2-3_arm64.deb ...
Unpacking libsystemd0:arm64 (257~rc2-3) over (257~rc1-4) ...
Setting up libsystemd0:arm64 (257~rc2-3) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 17128 files and directories currently installed.)
Preparing to unpack .../libudev1_257~rc2-3_arm64.deb ...
Unpacking libudev1:arm64 (257~rc2-3) over (257~rc1-4) ...
Setting up libudev1:arm64 (257~rc2-3) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 17128 files and directories currently installed.)
Preparing to unpack .../libapt-pkg6.0t64_2.9.11_arm64.deb ...
Unpacking libapt-pkg6.0t64:arm64 (2.9.11) over (2.9.10) ...
Setting up libapt-pkg6.0t64:arm64 (2.9.11) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 17128 files and directories currently installed.)
Preparing to unpack .../dpkg_1.22.12~1.gbp82cafd_arm64.deb ...
Unpacking dpkg (1.22.12~1.gbp82cafd) over (1.22.11) ...
Setting up dpkg (1.22.12~1.gbp82cafd) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 17127 files and directories currently installed.)
Preparing to unpack .../bsdextrautils_2.40.2-11_arm64.deb ...
Unpacking bsdextrautils (2.40.2-11) over (2.40.2-10) ...
Preparing to unpack .../libblkid1_2.40.2-11_arm64.deb ...
Unpacking libblkid1:arm64 (2.40.2-11) over (2.40.2-10) ...
Setting up libblkid1:arm64 (2.40.2-11) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 17123 files and directories currently installed.)
Preparing to unpack .../libmount1_2.40.2-11_arm64.deb ...
Unpacking libmount1:arm64 (2.40.2-11) over (2.40.2-10) ...
Setting up libmount1:arm64 (2.40.2-11) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 17123 files and directories currently installed.)
Preparing to unpack .../libsmartcols1_2.40.2-11_arm64.deb ...
Unpacking libsmartcols1:arm64 (2.40.2-11) over (2.40.2-10) ...
Setting up libsmartcols1:arm64 (2.40.2-11) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 17123 files and directories currently installed.)
Preparing to unpack .../mount_2.40.2-11_arm64.deb ...
Unpacking mount (2.40.2-11) over (2.40.2-10) ...
Preparing to unpack .../libuuid1_2.40.2-11_arm64.deb ...
Unpacking libuuid1:arm64 (2.40.2-11) over (2.40.2-10) ...
Setting up libuuid1:arm64 (2.40.2-11) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 17123 files and directories currently installed.)
Preparing to unpack .../util-linux_2.40.2-11_arm64.deb ...
Unpacking util-linux (2.40.2-11) over (2.40.2-10) ...
Setting up util-linux (2.40.2-11) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 17120 files and directories currently installed.)
Preparing to unpack .../libpcre2-8-0_10.44-4_arm64.deb ...
Unpacking libpcre2-8-0:arm64 (10.44-4) over (10.42-4+b2) ...
Setting up libpcre2-8-0:arm64 (10.44-4) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 17119 files and directories currently installed.)
Preparing to unpack .../libselinux1_3.7-3+b1_arm64.deb ...
Unpacking libselinux1:arm64 (3.7-3+b1) over (3.7-3) ...
Setting up libselinux1:arm64 (3.7-3+b1) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 17120 files and directories currently installed.)
Preparing to unpack .../libseccomp2_2.5.5-1+b3_arm64.deb ...
Unpacking libseccomp2:arm64 (2.5.5-1+b3) over (2.5.5-1+b2) ...
Setting up libseccomp2:arm64 (2.5.5-1+b3) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 17120 files and directories currently installed.)
Preparing to unpack .../archives/apt_2.9.11_arm64.deb ...
Unpacking apt (2.9.11) over (2.9.10) ...
Setting up apt (2.9.11) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 17117 files and directories currently installed.)
Preparing to unpack .../libaudit-common_1%3a4.0.2-2_all.deb ...
Unpacking libaudit-common (1:4.0.2-2) over (1:4.0.1-3) ...
Setting up libaudit-common (1:4.0.2-2) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 17117 files and directories currently installed.)
Preparing to unpack .../libcap-ng0_0.8.5-3+b1_arm64.deb ...
Unpacking libcap-ng0:arm64 (0.8.5-3+b1) over (0.8.5-3) ...
Setting up libcap-ng0:arm64 (0.8.5-3+b1) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 17118 files and directories currently installed.)
Preparing to unpack .../libaudit1_1%3a4.0.2-2_arm64.deb ...
Unpacking libaudit1:arm64 (1:4.0.2-2) over (1:4.0.1-3) ...
Setting up libaudit1:arm64 (1:4.0.2-2) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 17118 files and directories currently installed.)
Preparing to unpack .../0-login_1%3a4.16.0-2+really2.40.2-11_arm64.deb ...
Unpacking login (1:4.16.0-2+really2.40.2-11) over (1:4.16.0-2+really2.40.2-10) ...
Preparing to unpack .../1-login.defs_1%3a4.16.0-5_all.deb ...
Unpacking login.defs (1:4.16.0-5) over (1:4.16.0-4) ...
Preparing to unpack .../2-libsemanage2_3.7-2+b1_arm64.deb ...
Unpacking libsemanage2:arm64 (3.7-2+b1) over (3.7-2) ...
Preparing to unpack .../3-passwd_1%3a4.16.0-5_arm64.deb ...
Unpacking passwd (1:4.16.0-5) over (1:4.16.0-4) ...
Preparing to unpack .../4-dpkg-dev_1.22.12~1.gbp82cafd_all.deb ...
Unpacking dpkg-dev (1.22.12~1.gbp82cafd) over (1.22.11) ...
Preparing to unpack .../5-libdpkg-perl_1.22.12~1.gbp82cafd_all.deb ...
Unpacking libdpkg-perl (1.22.12~1.gbp82cafd) over (1.22.11) ...
Preparing to unpack .../6-libbrotli1_1.1.0-2+b6_arm64.deb ...
Unpacking libbrotli1:arm64 (1.1.0-2+b6) over (1.1.0-2+b5) ...
Preparing to unpack .../7-libglib2.0-0t64_2.82.2-3_arm64.deb ...
Unpacking libglib2.0-0t64:arm64 (2.82.2-3) over (2.82.2-2) ...
Preparing to unpack .../8-libmarkdown2_2.2.7-2.1_arm64.deb ...
Unpacking libmarkdown2:arm64 (2.2.7-2.1) over (2.2.7-2+b1) ...
Preparing to unpack .../9-libxml2_2.12.7+dfsg+really2.9.14-0.2+b1_arm64.deb ...
Unpacking libxml2:arm64 (2.12.7+dfsg+really2.9.14-0.2+b1) over (2.12.7+dfsg+really2.9.14-0.1) ...
Setting up bsdextrautils (2.40.2-11) ...
Setting up login.defs (1:4.16.0-5) ...
Installing new version of config file /etc/login.defs ...
Setting up libbrotli1:arm64 (1.1.0-2+b6) ...
Setting up libglib2.0-0t64:arm64 (2.82.2-3) ...
No schema files found: doing nothing.
Setting up libdpkg-perl (1.22.12~1.gbp82cafd) ...
Setting up mount (2.40.2-11) ...
Setting up libsemanage2:arm64 (3.7-2+b1) ...
Setting up libxml2:arm64 (2.12.7+dfsg+really2.9.14-0.2+b1) ...
Setting up libmarkdown2:arm64 (2.2.7-2.1) ...
Setting up login (1:4.16.0-2+really2.40.2-11) ...
Setting up dpkg-dev (1.22.12~1.gbp82cafd) ...
Setting up passwd (1:4.16.0-5) ...
Processing triggers for man-db (2.13.0-1) ...
Processing triggers for libc-bin (2.40-3) ...
+------------------------------------------------------------------------------+
| Fetch source files |
+------------------------------------------------------------------------------+
Local sources
-------------
/tmp/debusine-fetch-exec-upload-8sx5319d/libfreehand_0.1.2-3.dsc exists in /tmp/debusine-fetch-exec-upload-8sx5319d; copying to chroot
I: NOTICE: Log filtering will replace 'build/libfreehand-kbrv4f/libfreehand-0.1.2' with '<<PKGBUILDDIR>>'
I: NOTICE: Log filtering will replace 'build/libfreehand-kbrv4f' with '<<BUILDDIR>>'
+------------------------------------------------------------------------------+
| Install package build dependencies |
+------------------------------------------------------------------------------+
Setup apt archive
-----------------
Merged Build-Depends: autotools-dev, dh-autoreconf, debhelper (>= 10), gperf, libboost-dev, libcppunit-dev, libicu-dev, liblcms2-dev, librevenge-dev, pkg-config, zlib1g-dev, build-essential, fakeroot
Filtered Build-Depends: autotools-dev, dh-autoreconf, debhelper (>= 10), gperf, libboost-dev, libcppunit-dev, libicu-dev, liblcms2-dev, librevenge-dev, pkg-config, zlib1g-dev, build-essential, fakeroot
dpkg-deb: warning: root directory has unusual owner or group 998:999.
Hint: either pass --root-owner-group, see dpkg-build-api(7) or add an explicit 'Rules-Requires-Root: no' in debian/control.
dpkg-deb: warning: ignoring 1 warning about the control file(s)
dpkg-deb: building package 'sbuild-build-depends-main-dummy' in '/<<RESOLVERDIR>>/apt_archive/sbuild-build-depends-main-dummy.deb'.
Ign:1 copy:/<<RESOLVERDIR>>/apt_archive ./ InRelease
Get:2 copy:/<<RESOLVERDIR>>/apt_archive ./ Release [609 B]
Ign:3 copy:/<<RESOLVERDIR>>/apt_archive ./ Release.gpg
Get:4 copy:/<<RESOLVERDIR>>/apt_archive ./ Sources [744 B]
Get:5 copy:/<<RESOLVERDIR>>/apt_archive ./ Packages [776 B]
Fetched 2129 B in 0s (177 kB/s)
Reading package lists...
Get:1 file:/<<BUILDDIR>>/resolver-8f6fXv/apt_archive ./ InRelease
Ign:1 file:/<<BUILDDIR>>/resolver-8f6fXv/apt_archive ./ InRelease
Get:2 file:/<<BUILDDIR>>/resolver-8f6fXv/apt_archive ./ Release [606 B]
Get:2 file:/<<BUILDDIR>>/resolver-8f6fXv/apt_archive ./ Release [606 B]
Get:3 file:/<<BUILDDIR>>/resolver-8f6fXv/apt_archive ./ Release.gpg
Ign:3 file:/<<BUILDDIR>>/resolver-8f6fXv/apt_archive ./ Release.gpg
Reading package lists...
Reading package lists...
Install main build dependencies (apt-based resolver)
----------------------------------------------------
Installing build dependencies
Reading package lists...
Building dependency tree...
Reading state information...
The following additional packages will be installed:
autoconf automake autopoint autotools-dev build-essential cpp cpp-14
cpp-14-aarch64-linux-gnu cpp-aarch64-linux-gnu debhelper dh-autoreconf
dh-strip-nondeterminism dwz fakeroot g++ g++-14 g++-14-aarch64-linux-gnu
g++-aarch64-linux-gnu gcc gcc-14 gcc-14-aarch64-linux-gnu
gcc-aarch64-linux-gnu gperf icu-devtools libasan8 libboost-dev
libboost1.83-dev libc-dev-bin libc6-dev libcc1-0 libcppunit-1.15-0
libcppunit-dev libcrypt-dev libdebhelper-perl libelf1t64 libfakeroot
libfile-stripnondeterminism-perl libgcc-14-dev libhwasan0 libicu-dev
libisl23 libitm1 liblcms2-2 liblcms2-dev liblsan0 libmpc3 libmpfr6
libpkgconf3 librevenge-0.0-0 librevenge-dev libstdc++-14-dev libtool
libtsan2 libubsan1 linux-libc-dev m4 pkg-config pkgconf pkgconf-bin
po-debconf rpcsvc-proto zlib1g-dev
Suggested packages:
autoconf-archive gnu-standards autoconf-doc cpp-doc gcc-14-locales
cpp-14-doc dh-make gcc-14-doc gcc-multilib manpages-dev flex bison gdb
gcc-doc gdb-aarch64-linux-gnu libboost-doc libboost1.83-doc
libboost-atomic1.83-dev libboost-chrono1.83-dev libboost-container1.83-dev
libboost-context1.83-dev libboost-contract1.83-dev
libboost-coroutine1.83-dev libboost-date-time1.83-dev
libboost-exception1.83-dev libboost-fiber1.83-dev
libboost-filesystem1.83-dev libboost-graph-parallel1.83-dev
libboost-graph1.83-dev libboost-iostreams1.83-dev libboost-json1.83-dev
libboost-locale1.83-dev libboost-log1.83-dev libboost-math1.83-dev
libboost-mpi-python1.83-dev libboost-mpi1.83-dev libboost-nowide1.83-dev
libboost-numpy1.83-dev libboost-program-options1.83-dev
libboost-python1.83-dev libboost-random1.83-dev libboost-regex1.83-dev
libboost-serialization1.83-dev libboost-stacktrace1.83-dev
libboost-system1.83-dev libboost-test1.83-dev libboost-thread1.83-dev
libboost-timer1.83-dev libboost-type-erasure1.83-dev libboost-url1.83-dev
libboost-wave1.83-dev libboost1.83-tools-dev libmpfrc++-dev libntl-dev
libc-devtools glibc-doc libcppunit-doc icu-doc liblcms2-utils
libstdc++-14-doc libtool-doc gfortran | fortran95-compiler gcj-jdk m4-doc
libmail-box-perl
Recommended packages:
manpages manpages-dev libarchive-cpio-perl libltdl-dev libmail-sendmail-perl
The following NEW packages will be installed:
autoconf automake autopoint autotools-dev build-essential cpp cpp-14
cpp-14-aarch64-linux-gnu cpp-aarch64-linux-gnu debhelper dh-autoreconf
dh-strip-nondeterminism dwz fakeroot g++ g++-14 g++-14-aarch64-linux-gnu
g++-aarch64-linux-gnu gcc gcc-14 gcc-14-aarch64-linux-gnu
gcc-aarch64-linux-gnu gperf icu-devtools libasan8 libboost-dev
libboost1.83-dev libc-dev-bin libc6-dev libcc1-0 libcppunit-1.15-0
libcppunit-dev libcrypt-dev libdebhelper-perl libelf1t64 libfakeroot
libfile-stripnondeterminism-perl libgcc-14-dev libhwasan0 libicu-dev
libisl23 libitm1 liblcms2-2 liblcms2-dev liblsan0 libmpc3 libmpfr6
libpkgconf3 librevenge-0.0-0 librevenge-dev libstdc++-14-dev libtool
libtsan2 libubsan1 linux-libc-dev m4 pkg-config pkgconf pkgconf-bin
po-debconf rpcsvc-proto sbuild-build-depends-main-dummy zlib1g-dev
0 upgraded, 63 newly installed, 0 to remove and 0 not upgraded.
Need to get 86.2 MB of archives.
After this operation, 458 MB of additional disk space will be used.
Get:1 copy:/<<RESOLVERDIR>>/apt_archive ./ sbuild-build-depends-main-dummy 0.invalid.0 [948 B]
Get:2 http://deb.debian.org/debian sid/main arm64 m4 arm64 1.4.19-4 [277 kB]
Get:3 http://deb.debian.org/debian sid/main arm64 autoconf all 2.72-3 [493 kB]
Get:4 http://deb.debian.org/debian sid/main arm64 autotools-dev all 20220109.1 [51.6 kB]
Get:5 http://deb.debian.org/debian sid/main arm64 automake all 1:1.16.5-1.3 [823 kB]
Get:6 http://deb.debian.org/debian sid/main arm64 autopoint all 0.22.5-2 [723 kB]
Get:7 http://deb.debian.org/debian sid/main arm64 libc-dev-bin arm64 2.40-3 [50.9 kB]
Get:8 http://deb.debian.org/debian sid/main arm64 linux-libc-dev all 6.11.7-1 [2454 kB]
Get:9 http://deb.debian.org/debian sid/main arm64 libcrypt-dev arm64 1:4.4.36-5 [122 kB]
Get:10 http://deb.debian.org/debian sid/main arm64 rpcsvc-proto arm64 1.4.3-1+b1 [60.5 kB]
Get:11 http://deb.debian.org/debian sid/main arm64 libc6-dev arm64 2.40-3 [1591 kB]
Get:12 http://deb.debian.org/debian sid/main arm64 libisl23 arm64 0.27-1 [601 kB]
Get:13 http://deb.debian.org/debian sid/main arm64 libmpfr6 arm64 4.2.1-1+b2 [680 kB]
Get:14 http://deb.debian.org/debian sid/main arm64 libmpc3 arm64 1.3.1-1+b3 [50.5 kB]
Get:15 http://deb.debian.org/debian sid/main arm64 cpp-14-aarch64-linux-gnu arm64 14.2.0-8 [9166 kB]
Get:16 http://deb.debian.org/debian sid/main arm64 cpp-14 arm64 14.2.0-8 [1284 B]
Get:17 http://deb.debian.org/debian sid/main arm64 cpp-aarch64-linux-gnu arm64 4:14.2.0-1 [4832 B]
Get:18 http://deb.debian.org/debian sid/main arm64 cpp arm64 4:14.2.0-1 [1568 B]
Get:19 http://deb.debian.org/debian sid/main arm64 libcc1-0 arm64 14.2.0-8 [42.2 kB]
Get:20 http://deb.debian.org/debian sid/main arm64 libitm1 arm64 14.2.0-8 [24.2 kB]
Get:21 http://deb.debian.org/debian sid/main arm64 libasan8 arm64 14.2.0-8 [2579 kB]
Get:22 http://deb.debian.org/debian sid/main arm64 liblsan0 arm64 14.2.0-8 [1161 kB]
Get:23 http://deb.debian.org/debian sid/main arm64 libtsan2 arm64 14.2.0-8 [2386 kB]
Get:24 http://deb.debian.org/debian sid/main arm64 libubsan1 arm64 14.2.0-8 [1039 kB]
Get:25 http://deb.debian.org/debian sid/main arm64 libhwasan0 arm64 14.2.0-8 [1442 kB]
Get:26 http://deb.debian.org/debian sid/main arm64 libgcc-14-dev arm64 14.2.0-8 [2365 kB]
Get:27 http://deb.debian.org/debian sid/main arm64 gcc-14-aarch64-linux-gnu arm64 14.2.0-8 [17.7 MB]
Get:28 http://deb.debian.org/debian sid/main arm64 gcc-14 arm64 14.2.0-8 [519 kB]
Get:29 http://deb.debian.org/debian sid/main arm64 gcc-aarch64-linux-gnu arm64 4:14.2.0-1 [1440 B]
Get:30 http://deb.debian.org/debian sid/main arm64 gcc arm64 4:14.2.0-1 [5136 B]
Get:31 http://deb.debian.org/debian sid/main arm64 libstdc++-14-dev arm64 14.2.0-8 [2267 kB]
Get:32 http://deb.debian.org/debian sid/main arm64 g++-14-aarch64-linux-gnu arm64 14.2.0-8 [10.1 MB]
Get:33 http://deb.debian.org/debian sid/main arm64 g++-14 arm64 14.2.0-8 [20.2 kB]
Get:34 http://deb.debian.org/debian sid/main arm64 g++-aarch64-linux-gnu arm64 4:14.2.0-1 [1200 B]
Get:35 http://deb.debian.org/debian sid/main arm64 g++ arm64 4:14.2.0-1 [1332 B]
Get:36 http://deb.debian.org/debian sid/main arm64 build-essential arm64 12.12 [4624 B]
Get:37 http://deb.debian.org/debian sid/main arm64 libdebhelper-perl all 13.20 [89.7 kB]
Get:38 http://deb.debian.org/debian sid/main arm64 libtool all 2.4.7-8 [517 kB]
Get:39 http://deb.debian.org/debian sid/main arm64 dh-autoreconf all 20 [17.1 kB]
Get:40 http://deb.debian.org/debian sid/main arm64 libfile-stripnondeterminism-perl all 1.14.0-1 [19.5 kB]
Get:41 http://deb.debian.org/debian sid/main arm64 dh-strip-nondeterminism all 1.14.0-1 [8448 B]
Get:42 http://deb.debian.org/debian sid/main arm64 libelf1t64 arm64 0.192-4 [189 kB]
Get:43 http://deb.debian.org/debian sid/main arm64 dwz arm64 0.15-1+b1 [102 kB]
Get:44 http://deb.debian.org/debian sid/main arm64 po-debconf all 1.0.21+nmu1 [248 kB]
Get:45 http://deb.debian.org/debian sid/main arm64 debhelper all 13.20 [915 kB]
Get:46 http://deb.debian.org/debian sid/main arm64 libfakeroot arm64 1.36-1 [29.1 kB]
Get:47 http://deb.debian.org/debian sid/main arm64 fakeroot arm64 1.36-1 [74.4 kB]
Get:48 http://deb.debian.org/debian sid/main arm64 gperf arm64 3.1-1+b1 [145 kB]
Get:49 http://deb.debian.org/debian sid/main arm64 icu-devtools arm64 72.1-5+b1 [195 kB]
Get:50 http://deb.debian.org/debian sid/main arm64 libboost1.83-dev arm64 1.83.0-3.2+b1 [10.6 MB]
Get:51 http://deb.debian.org/debian sid/main arm64 libboost-dev arm64 1.83.0.2+b2 [3828 B]
Get:52 http://deb.debian.org/debian sid/main arm64 libcppunit-1.15-0 arm64 1.15.1-4+b2 [141 kB]
Get:53 http://deb.debian.org/debian sid/main arm64 libcppunit-dev arm64 1.15.1-4+b2 [202 kB]
Get:54 http://deb.debian.org/debian sid/main arm64 libicu-dev arm64 72.1-5+b1 [10.3 MB]
Get:55 http://deb.debian.org/debian sid/main arm64 liblcms2-2 arm64 2.16-2 [151 kB]
Get:56 http://deb.debian.org/debian sid/main arm64 liblcms2-dev arm64 2.16-2 [2181 kB]
Get:57 http://deb.debian.org/debian sid/main arm64 libpkgconf3 arm64 1.8.1-4 [35.3 kB]
Get:58 http://deb.debian.org/debian sid/main arm64 librevenge-0.0-0 arm64 0.0.5-3+b2 [270 kB]
Get:59 http://deb.debian.org/debian sid/main arm64 librevenge-dev arm64 0.0.5-3+b2 [115 kB]
Get:60 http://deb.debian.org/debian sid/main arm64 pkgconf-bin arm64 1.8.1-4 [29.6 kB]
Get:61 http://deb.debian.org/debian sid/main arm64 pkgconf arm64 1.8.1-4 [26.1 kB]
Get:62 http://deb.debian.org/debian sid/main arm64 pkg-config arm64 1.8.1-4 [14.0 kB]
Get:63 http://deb.debian.org/debian sid/main arm64 zlib1g-dev arm64 1:1.3.dfsg+really1.3.1-1+b1 [917 kB]
debconf: delaying package configuration, since apt-utils is not installed
Fetched 86.2 MB in 1s (89.5 MB/s)
Selecting previously unselected package m4.
(Reading database ... 17119 files and directories currently installed.)
Preparing to unpack .../00-m4_1.4.19-4_arm64.deb ...
Unpacking m4 (1.4.19-4) ...
Selecting previously unselected package autoconf.
Preparing to unpack .../01-autoconf_2.72-3_all.deb ...
Unpacking autoconf (2.72-3) ...
Selecting previously unselected package autotools-dev.
Preparing to unpack .../02-autotools-dev_20220109.1_all.deb ...
Unpacking autotools-dev (20220109.1) ...
Selecting previously unselected package automake.
Preparing to unpack .../03-automake_1%3a1.16.5-1.3_all.deb ...
Unpacking automake (1:1.16.5-1.3) ...
Selecting previously unselected package autopoint.
Preparing to unpack .../04-autopoint_0.22.5-2_all.deb ...
Unpacking autopoint (0.22.5-2) ...
Selecting previously unselected package libc-dev-bin.
Preparing to unpack .../05-libc-dev-bin_2.40-3_arm64.deb ...
Unpacking libc-dev-bin (2.40-3) ...
Selecting previously unselected package linux-libc-dev.
Preparing to unpack .../06-linux-libc-dev_6.11.7-1_all.deb ...
Unpacking linux-libc-dev (6.11.7-1) ...
Selecting previously unselected package libcrypt-dev:arm64.
Preparing to unpack .../07-libcrypt-dev_1%3a4.4.36-5_arm64.deb ...
Unpacking libcrypt-dev:arm64 (1:4.4.36-5) ...
Selecting previously unselected package rpcsvc-proto.
Preparing to unpack .../08-rpcsvc-proto_1.4.3-1+b1_arm64.deb ...
Unpacking rpcsvc-proto (1.4.3-1+b1) ...
Selecting previously unselected package libc6-dev:arm64.
Preparing to unpack .../09-libc6-dev_2.40-3_arm64.deb ...
Unpacking libc6-dev:arm64 (2.40-3) ...
Selecting previously unselected package libisl23:arm64.
Preparing to unpack .../10-libisl23_0.27-1_arm64.deb ...
Unpacking libisl23:arm64 (0.27-1) ...
Selecting previously unselected package libmpfr6:arm64.
Preparing to unpack .../11-libmpfr6_4.2.1-1+b2_arm64.deb ...
Unpacking libmpfr6:arm64 (4.2.1-1+b2) ...
Selecting previously unselected package libmpc3:arm64.
Preparing to unpack .../12-libmpc3_1.3.1-1+b3_arm64.deb ...
Unpacking libmpc3:arm64 (1.3.1-1+b3) ...
Selecting previously unselected package cpp-14-aarch64-linux-gnu.
Preparing to unpack .../13-cpp-14-aarch64-linux-gnu_14.2.0-8_arm64.deb ...
Unpacking cpp-14-aarch64-linux-gnu (14.2.0-8) ...
Selecting previously unselected package cpp-14.
Preparing to unpack .../14-cpp-14_14.2.0-8_arm64.deb ...
Unpacking cpp-14 (14.2.0-8) ...
Selecting previously unselected package cpp-aarch64-linux-gnu.
Preparing to unpack .../15-cpp-aarch64-linux-gnu_4%3a14.2.0-1_arm64.deb ...
Unpacking cpp-aarch64-linux-gnu (4:14.2.0-1) ...
Selecting previously unselected package cpp.
Preparing to unpack .../16-cpp_4%3a14.2.0-1_arm64.deb ...
Unpacking cpp (4:14.2.0-1) ...
Selecting previously unselected package libcc1-0:arm64.
Preparing to unpack .../17-libcc1-0_14.2.0-8_arm64.deb ...
Unpacking libcc1-0:arm64 (14.2.0-8) ...
Selecting previously unselected package libitm1:arm64.
Preparing to unpack .../18-libitm1_14.2.0-8_arm64.deb ...
Unpacking libitm1:arm64 (14.2.0-8) ...
Selecting previously unselected package libasan8:arm64.
Preparing to unpack .../19-libasan8_14.2.0-8_arm64.deb ...
Unpacking libasan8:arm64 (14.2.0-8) ...
Selecting previously unselected package liblsan0:arm64.
Preparing to unpack .../20-liblsan0_14.2.0-8_arm64.deb ...
Unpacking liblsan0:arm64 (14.2.0-8) ...
Selecting previously unselected package libtsan2:arm64.
Preparing to unpack .../21-libtsan2_14.2.0-8_arm64.deb ...
Unpacking libtsan2:arm64 (14.2.0-8) ...
Selecting previously unselected package libubsan1:arm64.
Preparing to unpack .../22-libubsan1_14.2.0-8_arm64.deb ...
Unpacking libubsan1:arm64 (14.2.0-8) ...
Selecting previously unselected package libhwasan0:arm64.
Preparing to unpack .../23-libhwasan0_14.2.0-8_arm64.deb ...
Unpacking libhwasan0:arm64 (14.2.0-8) ...
Selecting previously unselected package libgcc-14-dev:arm64.
Preparing to unpack .../24-libgcc-14-dev_14.2.0-8_arm64.deb ...
Unpacking libgcc-14-dev:arm64 (14.2.0-8) ...
Selecting previously unselected package gcc-14-aarch64-linux-gnu.
Preparing to unpack .../25-gcc-14-aarch64-linux-gnu_14.2.0-8_arm64.deb ...
Unpacking gcc-14-aarch64-linux-gnu (14.2.0-8) ...
Selecting previously unselected package gcc-14.
Preparing to unpack .../26-gcc-14_14.2.0-8_arm64.deb ...
Unpacking gcc-14 (14.2.0-8) ...
Selecting previously unselected package gcc-aarch64-linux-gnu.
Preparing to unpack .../27-gcc-aarch64-linux-gnu_4%3a14.2.0-1_arm64.deb ...
Unpacking gcc-aarch64-linux-gnu (4:14.2.0-1) ...
Selecting previously unselected package gcc.
Preparing to unpack .../28-gcc_4%3a14.2.0-1_arm64.deb ...
Unpacking gcc (4:14.2.0-1) ...
Selecting previously unselected package libstdc++-14-dev:arm64.
Preparing to unpack .../29-libstdc++-14-dev_14.2.0-8_arm64.deb ...
Unpacking libstdc++-14-dev:arm64 (14.2.0-8) ...
Selecting previously unselected package g++-14-aarch64-linux-gnu.
Preparing to unpack .../30-g++-14-aarch64-linux-gnu_14.2.0-8_arm64.deb ...
Unpacking g++-14-aarch64-linux-gnu (14.2.0-8) ...
Selecting previously unselected package g++-14.
Preparing to unpack .../31-g++-14_14.2.0-8_arm64.deb ...
Unpacking g++-14 (14.2.0-8) ...
Selecting previously unselected package g++-aarch64-linux-gnu.
Preparing to unpack .../32-g++-aarch64-linux-gnu_4%3a14.2.0-1_arm64.deb ...
Unpacking g++-aarch64-linux-gnu (4:14.2.0-1) ...
Selecting previously unselected package g++.
Preparing to unpack .../33-g++_4%3a14.2.0-1_arm64.deb ...
Unpacking g++ (4:14.2.0-1) ...
Selecting previously unselected package build-essential.
Preparing to unpack .../34-build-essential_12.12_arm64.deb ...
Unpacking build-essential (12.12) ...
Selecting previously unselected package libdebhelper-perl.
Preparing to unpack .../35-libdebhelper-perl_13.20_all.deb ...
Unpacking libdebhelper-perl (13.20) ...
Selecting previously unselected package libtool.
Preparing to unpack .../36-libtool_2.4.7-8_all.deb ...
Unpacking libtool (2.4.7-8) ...
Selecting previously unselected package dh-autoreconf.
Preparing to unpack .../37-dh-autoreconf_20_all.deb ...
Unpacking dh-autoreconf (20) ...
Selecting previously unselected package libfile-stripnondeterminism-perl.
Preparing to unpack .../38-libfile-stripnondeterminism-perl_1.14.0-1_all.deb ...
Unpacking libfile-stripnondeterminism-perl (1.14.0-1) ...
Selecting previously unselected package dh-strip-nondeterminism.
Preparing to unpack .../39-dh-strip-nondeterminism_1.14.0-1_all.deb ...
Unpacking dh-strip-nondeterminism (1.14.0-1) ...
Selecting previously unselected package libelf1t64:arm64.
Preparing to unpack .../40-libelf1t64_0.192-4_arm64.deb ...
Unpacking libelf1t64:arm64 (0.192-4) ...
Selecting previously unselected package dwz.
Preparing to unpack .../41-dwz_0.15-1+b1_arm64.deb ...
Unpacking dwz (0.15-1+b1) ...
Selecting previously unselected package po-debconf.
Preparing to unpack .../42-po-debconf_1.0.21+nmu1_all.deb ...
Unpacking po-debconf (1.0.21+nmu1) ...
Selecting previously unselected package debhelper.
Preparing to unpack .../43-debhelper_13.20_all.deb ...
Unpacking debhelper (13.20) ...
Selecting previously unselected package libfakeroot:arm64.
Preparing to unpack .../44-libfakeroot_1.36-1_arm64.deb ...
Unpacking libfakeroot:arm64 (1.36-1) ...
Selecting previously unselected package fakeroot.
Preparing to unpack .../45-fakeroot_1.36-1_arm64.deb ...
Unpacking fakeroot (1.36-1) ...
Selecting previously unselected package gperf.
Preparing to unpack .../46-gperf_3.1-1+b1_arm64.deb ...
Unpacking gperf (3.1-1+b1) ...
Selecting previously unselected package icu-devtools.
Preparing to unpack .../47-icu-devtools_72.1-5+b1_arm64.deb ...
Unpacking icu-devtools (72.1-5+b1) ...
Selecting previously unselected package libboost1.83-dev:arm64.
Preparing to unpack .../48-libboost1.83-dev_1.83.0-3.2+b1_arm64.deb ...
Unpacking libboost1.83-dev:arm64 (1.83.0-3.2+b1) ...
Selecting previously unselected package libboost-dev:arm64.
Preparing to unpack .../49-libboost-dev_1.83.0.2+b2_arm64.deb ...
Unpacking libboost-dev:arm64 (1.83.0.2+b2) ...
Selecting previously unselected package libcppunit-1.15-0:arm64.
Preparing to unpack .../50-libcppunit-1.15-0_1.15.1-4+b2_arm64.deb ...
Unpacking libcppunit-1.15-0:arm64 (1.15.1-4+b2) ...
Selecting previously unselected package libcppunit-dev:arm64.
Preparing to unpack .../51-libcppunit-dev_1.15.1-4+b2_arm64.deb ...
Unpacking libcppunit-dev:arm64 (1.15.1-4+b2) ...
Selecting previously unselected package libicu-dev:arm64.
Preparing to unpack .../52-libicu-dev_72.1-5+b1_arm64.deb ...
Unpacking libicu-dev:arm64 (72.1-5+b1) ...
Selecting previously unselected package liblcms2-2:arm64.
Preparing to unpack .../53-liblcms2-2_2.16-2_arm64.deb ...
Unpacking liblcms2-2:arm64 (2.16-2) ...
Selecting previously unselected package liblcms2-dev:arm64.
Preparing to unpack .../54-liblcms2-dev_2.16-2_arm64.deb ...
Unpacking liblcms2-dev:arm64 (2.16-2) ...
Selecting previously unselected package libpkgconf3:arm64.
Preparing to unpack .../55-libpkgconf3_1.8.1-4_arm64.deb ...
Unpacking libpkgconf3:arm64 (1.8.1-4) ...
Selecting previously unselected package librevenge-0.0-0:arm64.
Preparing to unpack .../56-librevenge-0.0-0_0.0.5-3+b2_arm64.deb ...
Unpacking librevenge-0.0-0:arm64 (0.0.5-3+b2) ...
Selecting previously unselected package librevenge-dev:arm64.
Preparing to unpack .../57-librevenge-dev_0.0.5-3+b2_arm64.deb ...
Unpacking librevenge-dev:arm64 (0.0.5-3+b2) ...
Selecting previously unselected package pkgconf-bin.
Preparing to unpack .../58-pkgconf-bin_1.8.1-4_arm64.deb ...
Unpacking pkgconf-bin (1.8.1-4) ...
Selecting previously unselected package pkgconf:arm64.
Preparing to unpack .../59-pkgconf_1.8.1-4_arm64.deb ...
Unpacking pkgconf:arm64 (1.8.1-4) ...
Selecting previously unselected package pkg-config:arm64.
Preparing to unpack .../60-pkg-config_1.8.1-4_arm64.deb ...
Unpacking pkg-config:arm64 (1.8.1-4) ...
Selecting previously unselected package zlib1g-dev:arm64.
Preparing to unpack .../61-zlib1g-dev_1%3a1.3.dfsg+really1.3.1-1+b1_arm64.deb ...
Unpacking zlib1g-dev:arm64 (1:1.3.dfsg+really1.3.1-1+b1) ...
Selecting previously unselected package sbuild-build-depends-main-dummy.
Preparing to unpack .../62-sbuild-build-depends-main-dummy_0.invalid.0_arm64.deb ...
Unpacking sbuild-build-depends-main-dummy (0.invalid.0) ...
Setting up libfile-stripnondeterminism-perl (1.14.0-1) ...
Setting up liblcms2-2:arm64 (2.16-2) ...
Setting up libcppunit-1.15-0:arm64 (1.15.1-4+b2) ...
Setting up po-debconf (1.0.21+nmu1) ...
Setting up libdebhelper-perl (13.20) ...
Setting up linux-libc-dev (6.11.7-1) ...
Setting up m4 (1.4.19-4) ...
Setting up gperf (3.1-1+b1) ...
Setting up librevenge-0.0-0:arm64 (0.0.5-3+b2) ...
Setting up libfakeroot:arm64 (1.36-1) ...
Setting up libelf1t64:arm64 (0.192-4) ...
Setting up fakeroot (1.36-1) ...
update-alternatives: using /usr/bin/fakeroot-sysv to provide /usr/bin/fakeroot (fakeroot) in auto mode
Setting up librevenge-dev:arm64 (0.0.5-3+b2) ...
Setting up autotools-dev (20220109.1) ...
Setting up libpkgconf3:arm64 (1.8.1-4) ...
Setting up rpcsvc-proto (1.4.3-1+b1) ...
Setting up libmpfr6:arm64 (4.2.1-1+b2) ...
Setting up libmpc3:arm64 (1.3.1-1+b3) ...
Setting up autopoint (0.22.5-2) ...
Setting up icu-devtools (72.1-5+b1) ...
Setting up pkgconf-bin (1.8.1-4) ...
Setting up autoconf (2.72-3) ...
Setting up liblcms2-dev:arm64 (2.16-2) ...
Setting up libubsan1:arm64 (14.2.0-8) ...
Setting up dh-strip-nondeterminism (1.14.0-1) ...
Setting up dwz (0.15-1+b1) ...
Setting up libhwasan0:arm64 (14.2.0-8) ...
Setting up libcrypt-dev:arm64 (1:4.4.36-5) ...
Setting up libasan8:arm64 (14.2.0-8) ...
Setting up libtsan2:arm64 (14.2.0-8) ...
Setting up libisl23:arm64 (0.27-1) ...
Setting up libcppunit-dev:arm64 (1.15.1-4+b2) ...
Setting up libc-dev-bin (2.40-3) ...
Setting up libcc1-0:arm64 (14.2.0-8) ...
Setting up liblsan0:arm64 (14.2.0-8) ...
Setting up libitm1:arm64 (14.2.0-8) ...
Setting up automake (1:1.16.5-1.3) ...
update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode
Setting up pkgconf:arm64 (1.8.1-4) ...
Setting up pkg-config:arm64 (1.8.1-4) ...
Setting up cpp-14-aarch64-linux-gnu (14.2.0-8) ...
Setting up libc6-dev:arm64 (2.40-3) ...
Setting up libgcc-14-dev:arm64 (14.2.0-8) ...
Setting up libstdc++-14-dev:arm64 (14.2.0-8) ...
Setting up libicu-dev:arm64 (72.1-5+b1) ...
Setting up libboost1.83-dev:arm64 (1.83.0-3.2+b1) ...
Setting up cpp-aarch64-linux-gnu (4:14.2.0-1) ...
Setting up cpp-14 (14.2.0-8) ...
Setting up zlib1g-dev:arm64 (1:1.3.dfsg+really1.3.1-1+b1) ...
Setting up cpp (4:14.2.0-1) ...
Setting up libboost-dev:arm64 (1.83.0.2+b2) ...
Setting up gcc-14-aarch64-linux-gnu (14.2.0-8) ...
Setting up gcc-aarch64-linux-gnu (4:14.2.0-1) ...
Setting up g++-14-aarch64-linux-gnu (14.2.0-8) ...
Setting up gcc-14 (14.2.0-8) ...
Setting up g++-aarch64-linux-gnu (4:14.2.0-1) ...
Setting up g++-14 (14.2.0-8) ...
Setting up libtool (2.4.7-8) ...
Setting up gcc (4:14.2.0-1) ...
Setting up dh-autoreconf (20) ...
Setting up g++ (4:14.2.0-1) ...
update-alternatives: using /usr/bin/g++ to provide /usr/bin/c++ (c++) in auto mode
Setting up build-essential (12.12) ...
Setting up debhelper (13.20) ...
Setting up sbuild-build-depends-main-dummy (0.invalid.0) ...
Processing triggers for man-db (2.13.0-1) ...
Processing triggers for libc-bin (2.40-3) ...
+------------------------------------------------------------------------------+
| Check architectures |
+------------------------------------------------------------------------------+
Arch check ok (arm64 included in any)
+------------------------------------------------------------------------------+
| Build environment |
+------------------------------------------------------------------------------+
Kernel: Linux 6.1.0-27-cloud-arm64 #1 SMP Debian 6.1.115-1 (2024-11-01) arm64 (aarch64)
Toolchain package versions: binutils_2.43.1-5 dpkg-dev_1.22.12~1.gbp82cafd g++-14_14.2.0-8 gcc-14_14.2.0-8 libc6-dev_2.40-3 libstdc++-14-dev_14.2.0-8 libstdc++6_14.2.0-8 linux-libc-dev_6.11.7-1
Package versions: appstream_1.0.3-1+b1 apt_2.9.11 autoconf_2.72-3 automake_1:1.16.5-1.3 autopoint_0.22.5-2 autotools-dev_20220109.1 base-files_13.5 base-passwd_3.6.5 bash_5.2.32-1+b2 binutils_2.43.1-5 binutils-aarch64-linux-gnu_2.43.1-5 binutils-common_2.43.1-5 bsdextrautils_2.40.2-11 bsdutils_1:2.40.2-11 build-essential_12.12 bzip2_1.0.8-6 ca-certificates_20240203 coreutils_9.5-1+b1 cpp_4:14.2.0-1 cpp-14_14.2.0-8 cpp-14-aarch64-linux-gnu_14.2.0-8 cpp-aarch64-linux-gnu_4:14.2.0-1 dash_0.5.12-9+b1 debconf_1.5.87 debhelper_13.20 debian-archive-keyring_2023.4 debianutils_5.21 dh-autoreconf_20 dh-strip-nondeterminism_1.14.0-1 diffstat_1.66-1+b1 diffutils_1:3.10-1+b1 dpkg_1.22.12~1.gbp82cafd dpkg-dev_1.22.12~1.gbp82cafd dwz_0.15-1+b1 e2fsprogs_1.47.1-1+b1 fakeroot_1.36-1 file_1:5.45-3+b1 findutils_4.10.0-3 g++_4:14.2.0-1 g++-14_14.2.0-8 g++-14-aarch64-linux-gnu_14.2.0-8 g++-aarch64-linux-gnu_4:14.2.0-1 gcc_4:14.2.0-1 gcc-14_14.2.0-8 gcc-14-aarch64-linux-gnu_14.2.0-8 gcc-14-base_14.2.0-8 gcc-aarch64-linux-gnu_4:14.2.0-1 gettext_0.22.5-2 gettext-base_0.22.5-2 gperf_3.1-1+b1 gpg_2.2.45-2 gpgconf_2.2.45-2 gpgv_2.2.45-2 grep_3.11-4+b1 groff-base_1.23.0-5 gzip_1.12-1.1+b1 hostname_3.25 icu-devtools_72.1-5+b1 init-system-helpers_1.67 intltool-debian_0.35.0+20060710.6 iso-codes_4.17.0-1 libacl1_2.3.2-2+b1 libaliased-perl_0.34-3 libappstream5_1.0.3-1+b1 libapt-pkg-perl_0.1.40+b6 libapt-pkg6.0t64_2.9.11 libarchive-zip-perl_1.68-1 libasan8_14.2.0-8 libassuan9_3.0.1-2 libatomic1_14.2.0-8 libattr1_1:2.5.2-2 libaudit-common_1:4.0.2-2 libaudit1_1:4.0.2-2 libb-hooks-endofscope-perl_0.28-1 libb-hooks-op-check-perl_0.22-3+b2 libberkeleydb-perl_0.66-1 libbinutils_2.43.1-5 libblkid1_2.40.2-11 libboost-dev_1.83.0.2+b2 libboost1.83-dev_1.83.0-3.2+b1 libbrotli1_1.1.0-2+b6 libbsd0_0.12.2-2 libbz2-1.0_1.0.8-6 libc-bin_2.40-3 libc-dev-bin_2.40-3 libc6_2.40-3 libc6-dev_2.40-3 libcap-ng0_0.8.5-3+b1 libcap2_1:2.66-5+b1 libcapture-tiny-perl_0.48-2 libcc1-0_14.2.0-8 libcgi-pm-perl_4.66-1 libclass-data-inheritable-perl_0.10-1 libclass-inspector-perl_1.36-3 libclass-method-modifiers-perl_2.15-1 libclass-xsaccessor-perl_1.19-4+b4 libclone-perl_0.47-1+b1 libcom-err2_1.47.1-1+b1 libconfig-tiny-perl_2.30-1 libconst-fast-perl_0.014-2 libcpanel-json-xs-perl_4.38-1+b1 libcppunit-1.15-0_1.15.1-4+b2 libcppunit-dev_1.15.1-4+b2 libcrypt-dev_1:4.4.36-5 libcrypt1_1:4.4.36-5 libctf-nobfd0_2.43.1-5 libctf0_2.43.1-5 libcurl3t64-gnutls_8.11.0-1 libdata-dpath-perl_0.60-1 libdata-messagepack-perl_1.02-1+b4 libdata-optlist-perl_0.114-1 libdata-validate-domain-perl_0.15-1 libdata-validate-ip-perl_0.31-1 libdata-validate-uri-perl_0.07-3 libdb5.3t64_5.3.28+dfsg2-9 libdebconfclient0_0.273 libdebhelper-perl_13.20 libdevel-callchecker-perl_0.009-1+b1 libdevel-size-perl_0.84-1+b1 libdevel-stacktrace-perl_2.0500-1 libdpkg-perl_1.22.12~1.gbp82cafd libdynaloader-functions-perl_0.004-1 libelf1t64_0.192-4 libemail-address-xs-perl_1.05-1+b4 libencode-locale-perl_1.05-3 libexception-class-perl_1.45-1 libext2fs2t64_1.47.1-1+b1 libfakeroot_1.36-1 libffi8_3.4.6-1 libfile-basedir-perl_0.09-2 libfile-find-rule-perl_0.34-3 libfile-listing-perl_6.16-1 libfile-sharedir-perl_1.118-3 libfile-stripnondeterminism-perl_1.14.0-1 libfont-ttf-perl_1.06-2 libgcc-14-dev_14.2.0-8 libgcc-s1_14.2.0-8 libgcrypt20_1.11.0-6 libgdbm-compat4t64_1.24-2 libgdbm6t64_1.24-2 libglib2.0-0t64_2.82.2-3 libgmp10_2:6.3.0+dfsg-2+b2 libgnutls30t64_3.8.8-2 libgomp1_14.2.0-8 libgpg-error0_1.50-4 libgprofng0_2.43.1-5 libgssapi-krb5-2_1.21.3-3 libhogweed6t64_3.10-1+b1 libhtml-form-perl_6.12-1 libhtml-html5-entities-perl_0.004-3 libhtml-parser-perl_3.83-1+b1 libhtml-tagset-perl_3.24-1 libhtml-tokeparser-simple-perl_3.16-4 libhtml-tree-perl_5.07-3 libhttp-cookies-perl_6.11-1 libhttp-date-perl_6.06-1 libhttp-message-perl_7.00-2 libhttp-negotiate-perl_6.01-2 libhwasan0_14.2.0-8 libicu-dev_72.1-5+b1 libicu72_72.1-5+b1 libidn2-0_2.3.7-2+b1 libimport-into-perl_1.002005-2 libio-html-perl_1.004-3 libio-interactive-perl_1.025-1 libio-socket-ssl-perl_2.089-1 libio-string-perl_1.08-4 libipc-run3-perl_0.049-1 libipc-system-simple-perl_1.30-2 libisl23_0.27-1 libiterator-perl_0.03+ds1-2 libiterator-util-perl_0.02+ds1-2 libitm1_14.2.0-8 libjansson4_2.14-2+b3 libjson-maybexs-perl_1.004008-1 libk5crypto3_1.21.3-3 libkeyutils1_1.6.3-4 libkrb5-3_1.21.3-3 libkrb5support0_1.21.3-3 liblcms2-2_2.16-2 liblcms2-dev_2.16-2 libldap-2.5-0_2.5.18+dfsg-3+b1 liblist-compare-perl_0.55-2 liblist-someutils-perl_0.59-1 liblist-utilsby-perl_0.12-2 liblsan0_14.2.0-8 liblwp-mediatypes-perl_6.04-2 liblwp-protocol-https-perl_6.14-1 liblz1_1.15~pre2-1 liblz4-1_1.9.4-3+b1 liblzma5_5.6.3-1+b1 liblzo2-2_2.10-3+b1 libmagic-mgc_1:5.45-3+b1 libmagic1t64_1:5.45-3+b1 libmarkdown2_2.2.7-2.1 libmd0_1.1.0-2+b1 libmldbm-perl_2.05-4 libmodule-implementation-perl_0.09-2 libmodule-runtime-perl_0.016-2 libmoo-perl_2.005005-1 libmoox-aliases-perl_0.001006-2 libmount1_2.40.2-11 libmouse-perl_2.5.11-1+b1 libmpc3_1.3.1-1+b3 libmpfr6_4.2.1-1+b2 libnamespace-clean-perl_0.27-2 libnet-domain-tld-perl_1.75-4 libnet-http-perl_6.23-1 libnet-ipv6addr-perl_1.02-1 libnet-netmask-perl_2.0002-2 libnet-ssleay-perl_1.94-2 libnetaddr-ip-perl_4.079+dfsg-2+b4 libnettle8t64_3.10-1+b1 libnghttp2-14_1.64.0-1 libnghttp3-9_1.4.0-1+b1 libngtcp2-16_1.6.0-1 libngtcp2-crypto-gnutls8_1.6.0-1 libnumber-compare-perl_0.03-3 libp11-kit0_0.25.5-2+b1 libpackage-stash-perl_0.40-1 libpam-modules_1.5.3-7+b1 libpam-modules-bin_1.5.3-7+b1 libpam-runtime_1.5.3-7 libpam0g_1.5.3-7+b1 libparams-classify-perl_0.015-2+b4 libparams-util-perl_1.102-3+b1 libpath-tiny-perl_0.146-1 libpcre2-8-0_10.44-4 libperl5.40_5.40.0-7 libperlio-gzip-perl_0.20-1+b4 libperlio-utf8-strict-perl_0.010-1+b3 libpipeline1_1.5.8-1 libpkgconf3_1.8.1-4 libproc-processtable-perl_0.636-1+b3 libpsl5t64_0.21.2-1.1+b1 libreadline8t64_8.2-5 libregexp-wildcards-perl_1.05-3 librevenge-0.0-0_0.0.5-3+b2 librevenge-dev_0.0.5-3+b2 librole-tiny-perl_2.002004-1 librtmp1_2.4+20151223.gitfa8646d.1-2+b5 libsasl2-2_2.1.28+dfsg1-8 libsasl2-modules-db_2.1.28+dfsg1-8 libseccomp2_2.5.5-1+b3 libselinux1_3.7-3+b1 libsemanage-common_3.7-2 libsemanage2_3.7-2+b1 libsepol2_3.7-1 libsereal-decoder-perl_5.004+ds-1+b3 libsereal-encoder-perl_5.004+ds-1+b3 libsframe1_2.43.1-5 libsmartcols1_2.40.2-11 libsort-versions-perl_1.62-3 libsqlite3-0_3.46.1-1 libss2_1.47.1-1+b1 libssh2-1t64_1.11.1-1 libssl3t64_3.3.2-2 libstdc++-14-dev_14.2.0-8 libstdc++6_14.2.0-8 libstemmer0d_2.2.0-4+b2 libstrictures-perl_2.000006-1 libsub-exporter-perl_0.990-1 libsub-exporter-progressive-perl_0.001013-3 libsub-identify-perl_0.14-3+b3 libsub-install-perl_0.929-1 libsub-name-perl_0.27-1+b3 libsub-quote-perl_2.006008-1 libsyntax-keyword-try-perl_0.30-1+b1 libsystemd0_257~rc2-3 libtasn1-6_4.19.0-3+b3 libterm-readkey-perl_2.38-2+b4 libtext-glob-perl_0.11-3 libtext-levenshteinxs-perl_0.03-5+b4 libtext-markdown-discount-perl_0.16-1+b3 libtext-xslate-perl_3.5.9-2+b1 libtime-duration-perl_1.21-2 libtime-moment-perl_0.44-2+b4 libtimedate-perl_2.3300-2 libtinfo6_6.5-2+b1 libtool_2.4.7-8 libtry-tiny-perl_0.32-1 libtsan2_14.2.0-8 libubsan1_14.2.0-8 libuchardet0_0.0.8-1+b2 libudev1_257~rc2-3 libunicode-utf8-perl_0.62-2+b3 libunistring5_1.2-1+b1 liburi-perl_5.30-1 libuuid1_2.40.2-11 libvariable-magic-perl_0.64-1+b1 libwww-mechanize-perl_2.19-1 libwww-perl_6.77-1 libwww-robotrules-perl_6.02-1 libxml-libxml-perl_2.0207+dfsg+really+2.0134-5+b1 libxml-namespacesupport-perl_1.12-2 libxml-sax-base-perl_1.09-3 libxml-sax-perl_1.02+dfsg-3 libxml2_2.12.7+dfsg+really2.9.14-0.2+b1 libxmlb2_0.3.21-1 libxs-parse-keyword-perl_0.46-1+b1 libxxhash0_0.8.2-2+b2 libyaml-0-2_0.2.5-1+b2 libyaml-libyaml-perl_0.902.0+ds-2+b1 libzstd1_1.5.6+dfsg-1+b1 lintian_2.120.0 linux-libc-dev_6.11.7-1 login_1:4.16.0-2+really2.40.2-11 login.defs_1:4.16.0-5 logsave_1.47.1-1+b1 lzop_1.04-2+b1 m4_1.4.19-4 make_4.3-4.1+b1 man-db_2.13.0-1 mawk_1.3.4.20240905-1 mount_2.40.2-11 ncurses-base_6.5-2 ncurses-bin_6.5-2+b1 netbase_6.4 openssl_3.3.2-2 openssl-provider-legacy_3.3.2-2 passwd_1:4.16.0-5 patch_2.7.6-7+b1 patchutils_0.4.2-1+b1 perl_5.40.0-7 perl-base_5.40.0-7 perl-modules-5.40_5.40.0-7 perl-openssl-defaults_7+b2 pkg-config_1.8.1-4 pkgconf_1.8.1-4 pkgconf-bin_1.8.1-4 plzip_1.11-2 po-debconf_1.0.21+nmu1 readline-common_8.2-5 rpcsvc-proto_1.4.3-1+b1 sbuild-build-depends-main-dummy_0.invalid.0 sed_4.9-2+b1 sensible-utils_0.0.24 shared-mime-info_2.4-5+b1 sysvinit-utils_3.11-1 t1utils_1.41-4+b1 tar_1.35+dfsg-3+b1 tzdata_2024b-3 ucf_3.0043+nmu1 unzip_6.0-28+b1 util-linux_2.40.2-11 xz-utils_5.6.3-1+b1 zlib1g_1:1.3.dfsg+really1.3.1-1+b1 zlib1g-dev_1:1.3.dfsg+really1.3.1-1+b1
+------------------------------------------------------------------------------+
| Build |
+------------------------------------------------------------------------------+
Unpack source
-------------
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA512
Format: 3.0 (quilt)
Source: libfreehand
Binary: libfreehand-dev, libfreehand-0.1-1
Architecture: any
Version: 0.1.2-3
Maintainer: Debian LibreOffice Maintainers <debian-openoffice@lists.debian.org>
Uploaders: Rene Engelhard <rene@debian.org>
Homepage: http://freedesktop.org/wiki/Software/libfreehand
Standards-Version: 3.9.4
Build-Depends: autotools-dev, dh-autoreconf, debhelper (>= 10), gperf, libboost-dev, libcppunit-dev, libicu-dev, liblcms2-dev, librevenge-dev, pkg-config, zlib1g-dev
Package-List:
libfreehand-0.1-1 deb libs optional arch=any
libfreehand-dev deb libdevel optional arch=any
Checksums-Sha1:
f945b23b7801a3601998973028a054ee379967cb 516132 libfreehand_0.1.2.orig.tar.xz
2dd4c0d76b1a5de436a300e9094484881db63eba 13488 libfreehand_0.1.2-3.debian.tar.xz
Checksums-Sha256:
0e422d1564a6dbf22a9af598535425271e583514c0f7ba7d9091676420de34ac 516132 libfreehand_0.1.2.orig.tar.xz
c54b337919ad5f0e748d1e21710d8cd310becef1ce4be4d04bd406f956435bb6 13488 libfreehand_0.1.2-3.debian.tar.xz
Files:
c3788f5686839fd097bd77d8f51c3d04 516132 libfreehand_0.1.2.orig.tar.xz
df7d14263cba37b1c54320aaef968f71 13488 libfreehand_0.1.2-3.debian.tar.xz
-----BEGIN PGP SIGNATURE-----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=gMDI
-----END PGP SIGNATURE-----
gpgv: Signature made Mon Jun 22 16:49:25 2020 UTC
gpgv: using RSA key E12DEA46750670CFA960801D0AA04571D03E3E70
gpgv: issuer "rene@debian.org"
gpgv: Can't check signature: No public key
dpkg-source: warning: cannot verify inline signature for ./libfreehand_0.1.2-3.dsc: no acceptable signature found
dpkg-source: info: extracting libfreehand in /<<PKGBUILDDIR>>
dpkg-source: info: unpacking libfreehand_0.1.2.orig.tar.xz
dpkg-source: info: unpacking libfreehand_0.1.2-3.debian.tar.xz
dpkg-source: info: using patch list from debian/patches/series
dpkg-source: info: applying icu-65-api-macros-with-semicolon.patch.1
Check disk space
----------------
Sufficient free space for build
User Environment
----------------
APT_CONFIG=/var/lib/sbuild/apt.conf
HOME=/sbuild-nonexistent
LANG=en_US.UTF-8
LC_ALL=C.UTF-8
LOGNAME=debusine-worker
PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games
SHELL=/bin/sh
USER=debusine-worker
dpkg-buildpackage
-----------------
Command: dpkg-buildpackage -us -uc -b -rfakeroot
dpkg-buildpackage: info: source package libfreehand
dpkg-buildpackage: info: source version 0.1.2-3
dpkg-buildpackage: info: source distribution unstable
dpkg-buildpackage: info: source changed by Rene Engelhard <rene@debian.org>
dpkg-source --before-build .
dpkg-buildpackage: info: host architecture arm64
debian/rules clean
dh clean --with autoreconf
dh_clean
debian/rules binary
dh binary --with autoreconf
dh_update_autotools_config
dh_autoreconf
libtoolize: putting auxiliary files in '.'.
libtoolize: copying file './ltmain.sh'
libtoolize: putting macros in AC_CONFIG_MACRO_DIRS, 'm4'.
libtoolize: copying file 'm4/libtool.m4'
libtoolize: copying file 'm4/ltoptions.m4'
libtoolize: copying file 'm4/ltsugar.m4'
libtoolize: copying file 'm4/ltversion.m4'
libtoolize: copying file 'm4/lt~obsolete.m4'
configure.ac:18: warning: The macro 'AC_CONFIG_HEADER' is obsolete.
configure.ac:18: You should run autoupdate.
./lib/autoconf/status.m4:719: AC_CONFIG_HEADER is expanded from...
configure.ac:18: the top level
configure.ac:181: warning: The macro 'AC_TRY_COMPILE' is obsolete.
configure.ac:181: You should run autoupdate.
./lib/autoconf/general.m4:2845: AC_TRY_COMPILE is expanded from...
lib/m4sugar/m4sh.m4:690: _AS_IF_ELSE is expanded from...
lib/m4sugar/m4sh.m4:697: AS_IF is expanded from...
configure.ac:181: the top level
configure.ac:26: installing './compile'
configure.ac:19: installing './missing'
src/conv/raw/Makefile.am: installing './depcomp'
debian/rules override_dh_auto_configure
make[1]: Entering directory '/<<PKGBUILDDIR>>'
dh_auto_configure -- --disable-werror
./configure --build=aarch64-linux-gnu --prefix=/usr --includedir=\${prefix}/include --mandir=\${prefix}/share/man --infodir=\${prefix}/share/info --sysconfdir=/etc --localstatedir=/var --disable-option-checking --disable-silent-rules --libdir=\${prefix}/lib/aarch64-linux-gnu --libexecdir=\${prefix}/lib/aarch64-linux-gnu --disable-maintainer-mode --disable-dependency-tracking --disable-werror
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a race-free mkdir -p... /usr/bin/mkdir -p
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking whether make supports nested variables... yes
checking whether make supports nested variables... (cached) yes
checking whether make supports the include directive... yes (GNU style)
checking for gcc... gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether the compiler supports GNU C... yes
checking whether gcc accepts -g... yes
checking for gcc option to enable C11 features... none needed
checking whether gcc understands -c and -o together... yes
checking dependency style of gcc... none
checking for ar... ar
checking the archiver (ar) interface... ar
checking for gcc... (cached) gcc
checking whether the compiler supports GNU C... (cached) yes
checking whether gcc accepts -g... (cached) yes
checking for gcc option to enable C11 features... (cached) none needed
checking whether gcc understands -c and -o together... (cached) yes
checking dependency style of gcc... (cached) none
checking how to run the C preprocessor... gcc -E
checking for g++... g++
checking whether the compiler supports GNU C++... yes
checking whether g++ accepts -g... yes
checking for g++ option to enable C++11 features... none needed
checking dependency style of g++... none
checking whether ln -s works... yes
checking whether make sets $(MAKE)... (cached) yes
checking build system type... aarch64-unknown-linux-gnu
checking host system type... aarch64-unknown-linux-gnu
checking how to print strings... printf
checking for a sed that does not truncate output... /usr/bin/sed
checking for grep that handles long lines and -e... /usr/bin/grep
checking for egrep... /usr/bin/grep -E
checking for fgrep... /usr/bin/grep -F
checking for ld used by gcc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B
checking the name lister (/usr/bin/nm -B) interface... BSD nm
checking the maximum length of command line arguments... 1572864
checking how to convert aarch64-unknown-linux-gnu file names to aarch64-unknown-linux-gnu format... func_convert_file_noop
checking how to convert aarch64-unknown-linux-gnu file names to toolchain format... func_convert_file_noop
checking for /usr/bin/ld option to reload object files... -r
checking for file... file
checking for objdump... objdump
checking how to recognize dependent libraries... pass_all
checking for dlltool... no
checking how to associate runtime and link libraries... printf %s\n
checking for archiver @FILE support... @
checking for strip... strip
checking for ranlib... ranlib
checking command to parse /usr/bin/nm -B output from gcc object... ok
checking for sysroot... no
checking for a working dd... /usr/bin/dd
checking how to truncate binary pipes... /usr/bin/dd bs=4096 count=1
checking for mt... no
checking if : is a manifest tool... no
checking for stdio.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for strings.h... yes
checking for sys/stat.h... yes
checking for sys/types.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if gcc supports -fno-rtti -fno-exceptions... no
checking for gcc option to produce PIC... -fPIC -DPIC
checking if gcc PIC flag -fPIC -DPIC works... yes
checking if gcc static flag -static works... yes
checking if gcc supports -c -o file.o... yes
checking if gcc supports -c -o file.o... (cached) yes
checking whether the gcc linker (/usr/bin/ld) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... no
checking how to run the C++ preprocessor... g++ -E
checking for ld used by g++... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking whether the g++ linker (/usr/bin/ld) supports shared libraries... yes
checking for g++ option to produce PIC... -fPIC -DPIC
checking if g++ PIC flag -fPIC -DPIC works... yes
checking if g++ static flag -static works... yes
checking if g++ supports -c -o file.o... yes
checking if g++ supports -c -o file.o... (cached) yes
checking whether the g++ linker (/usr/bin/ld) supports shared libraries... yes
checking dynamic linker characteristics... (cached) GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether g++ supports C++11 features by default... yes
checking for __attribute__((format))... yes
checking for pkg-config... /usr/bin/pkg-config
checking pkg-config is at least version 0.20... yes
checking for egrep... (cached) /usr/bin/grep -E
checking for a sed that does not truncate output... (cached) /usr/bin/sed
checking for
librevenge-0.0
... yes
checking for
librevenge-stream-0.0
... yes
checking for
librevenge-generators-0.0
... yes
checking for zlib... yes
checking for icu-uc... yes
checking for
lcms2
... yes
checking for boost/cstdint.hpp... yes
checking for native Win32... no
checking for Win32 platform in general... no
checking for -fvisibility=hidden compiler flag... yes
checking for cppunit... yes
checking for doxygen... no
configure: WARNING: *** Could not find doxygen in your PATH.
configure: WARNING: *** The documentation will not be built.
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating Makefile
config.status: creating src/Makefile
config.status: creating src/conv/Makefile
config.status: creating src/conv/raw/Makefile
config.status: creating src/conv/raw/fh2raw.rc
config.status: creating src/conv/svg/Makefile
config.status: creating src/conv/svg/fh2svg.rc
config.status: creating src/conv/text/Makefile
config.status: creating src/conv/text/fh2text.rc
config.status: creating src/fuzz/Makefile
config.status: creating src/lib/Makefile
config.status: creating src/lib/libfreehand.rc
config.status: creating src/test/Makefile
config.status: creating inc/Makefile
config.status: creating inc/libfreehand/Makefile
config.status: creating build/Makefile
config.status: creating build/win32/Makefile
config.status: creating docs/Makefile
config.status: creating docs/doxygen/Makefile
config.status: creating libfreehand-0.1.pc
config.status: creating config.h
config.status: executing depfiles commands
config.status: executing libtool commands
configure:
==============================================================================
Build configuration:
debug: no
docs: no
fuzzers: no
tests: yes
tools: yes
werror: no
==============================================================================
make[1]: Leaving directory '/<<PKGBUILDDIR>>'
dh_auto_build
make -j16
make[1]: Entering directory '/<<PKGBUILDDIR>>'
make all-recursive
make[2]: Entering directory '/<<PKGBUILDDIR>>'
Making all in build
make[3]: Entering directory '/<<PKGBUILDDIR>>/build'
Making all in win32
make[4]: Entering directory '/<<PKGBUILDDIR>>/build/win32'
make[4]: Nothing to be done for 'all'.
make[4]: Leaving directory '/<<PKGBUILDDIR>>/build/win32'
make[4]: Entering directory '/<<PKGBUILDDIR>>/build'
make[4]: Nothing to be done for 'all-am'.
make[4]: Leaving directory '/<<PKGBUILDDIR>>/build'
make[3]: Leaving directory '/<<PKGBUILDDIR>>/build'
Making all in inc
make[3]: Entering directory '/<<PKGBUILDDIR>>/inc'
Making all in libfreehand
make[4]: Entering directory '/<<PKGBUILDDIR>>/inc/libfreehand'
make[4]: Nothing to be done for 'all'.
make[4]: Leaving directory '/<<PKGBUILDDIR>>/inc/libfreehand'
make[4]: Entering directory '/<<PKGBUILDDIR>>/inc'
make[4]: Nothing to be done for 'all-am'.
make[4]: Leaving directory '/<<PKGBUILDDIR>>/inc'
make[3]: Leaving directory '/<<PKGBUILDDIR>>/inc'
Making all in src
make[3]: Entering directory '/<<PKGBUILDDIR>>/src'
Making all in lib
make[4]: Entering directory '/<<PKGBUILDDIR>>/src/lib'
/bin/bash '/<<PKGBUILDDIR>>/missing' perl ../../src/lib/gentoken.pl ../../src/lib/tokens.txt \
tokens.h tokens.gperf
/bin/bash '/<<PKGBUILDDIR>>/missing' gperf --compare-strncmp -C -m 20 tokens.gperf \
| /usr/bin/sed -e 's/(char\*)0/(char\*)0, 0/g' -e 's/register //g' > tokenhash.h
make all-am
make[5]: Entering directory '/<<PKGBUILDDIR>>/src/lib'
/bin/bash ../../libtool --tag=CXX --mode=compile g++ -DHAVE_CONFIG_H -I. -I../.. -Wdate-time -D_FORTIFY_SOURCE=2 -DLIBFREEHAND_BUILD=1 -I../../inc -I/usr/include/librevenge-0.0 -pthread -DNDEBUG -g -O2 -ffile-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -fvisibility=hidden -DLIBFREEHAND_VISIBILITY -Wall -Wextra -Wshadow -pedantic -c -o FreeHandDocument.lo FreeHandDocument.cpp
/bin/bash ../../libtool --tag=CXX --mode=compile g++ -DHAVE_CONFIG_H -I. -I../.. -Wdate-time -D_FORTIFY_SOURCE=2 -DLIBFREEHAND_BUILD=1 -I../../inc -I/usr/include/librevenge-0.0 -pthread -DNDEBUG -g -O2 -ffile-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -fvisibility=hidden -DLIBFREEHAND_VISIBILITY -Wall -Wextra -Wshadow -pedantic -c -o FHCollector.lo FHCollector.cpp
/bin/bash ../../libtool --tag=CXX --mode=compile g++ -DHAVE_CONFIG_H -I. -I../.. -Wdate-time -D_FORTIFY_SOURCE=2 -DLIBFREEHAND_BUILD=1 -I../../inc -I/usr/include/librevenge-0.0 -pthread -DNDEBUG -g -O2 -ffile-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -fvisibility=hidden -DLIBFREEHAND_VISIBILITY -Wall -Wextra -Wshadow -pedantic -c -o FHInternalStream.lo FHInternalStream.cpp
/bin/bash ../../libtool --tag=CXX --mode=compile g++ -DHAVE_CONFIG_H -I. -I../.. -Wdate-time -D_FORTIFY_SOURCE=2 -DLIBFREEHAND_BUILD=1 -I../../inc -I/usr/include/librevenge-0.0 -pthread -DNDEBUG -g -O2 -ffile-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -fvisibility=hidden -DLIBFREEHAND_VISIBILITY -Wall -Wextra -Wshadow -pedantic -c -o FHParser.lo FHParser.cpp
/bin/bash ../../libtool --tag=CXX --mode=compile g++ -DHAVE_CONFIG_H -I. -I../.. -Wdate-time -D_FORTIFY_SOURCE=2 -DLIBFREEHAND_BUILD=1 -I../../inc -I/usr/include/librevenge-0.0 -pthread -DNDEBUG -g -O2 -ffile-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -fvisibility=hidden -DLIBFREEHAND_VISIBILITY -Wall -Wextra -Wshadow -pedantic -c -o FHPath.lo FHPath.cpp
/bin/bash ../../libtool --tag=CXX --mode=compile g++ -DHAVE_CONFIG_H -I. -I../.. -Wdate-time -D_FORTIFY_SOURCE=2 -DLIBFREEHAND_BUILD=1 -I../../inc -I/usr/include/librevenge-0.0 -pthread -DNDEBUG -g -O2 -ffile-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -fvisibility=hidden -DLIBFREEHAND_VISIBILITY -Wall -Wextra -Wshadow -pedantic -c -o FHTransform.lo FHTransform.cpp
/bin/bash ../../libtool --tag=CXX --mode=compile g++ -DHAVE_CONFIG_H -I. -I../.. -Wdate-time -D_FORTIFY_SOURCE=2 -DLIBFREEHAND_BUILD=1 -I../../inc -I/usr/include/librevenge-0.0 -pthread -DNDEBUG -g -O2 -ffile-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -fvisibility=hidden -DLIBFREEHAND_VISIBILITY -Wall -Wextra -Wshadow -pedantic -c -o libfreehand_utils.lo libfreehand_utils.cpp
libtool: compile: g++ -DHAVE_CONFIG_H -I. -I../.. -Wdate-time -D_FORTIFY_SOURCE=2 -DLIBFREEHAND_BUILD=1 -I../../inc -I/usr/include/librevenge-0.0 -pthread -DNDEBUG -g -O2 -ffile-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -fvisibility=hidden -DLIBFREEHAND_VISIBILITY -Wall -Wextra -Wshadow -pedantic -c FreeHandDocument.cpp -fPIC -DPIC -o .libs/FreeHandDocument.o
libtool: compile: g++ -DHAVE_CONFIG_H -I. -I../.. -Wdate-time -D_FORTIFY_SOURCE=2 -DLIBFREEHAND_BUILD=1 -I../../inc -I/usr/include/librevenge-0.0 -pthread -DNDEBUG -g -O2 -ffile-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -fvisibility=hidden -DLIBFREEHAND_VISIBILITY -Wall -Wextra -Wshadow -pedantic -c FHCollector.cpp -fPIC -DPIC -o .libs/FHCollector.o
libtool: compile: g++ -DHAVE_CONFIG_H -I. -I../.. -Wdate-time -D_FORTIFY_SOURCE=2 -DLIBFREEHAND_BUILD=1 -I../../inc -I/usr/include/librevenge-0.0 -pthread -DNDEBUG -g -O2 -ffile-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -fvisibility=hidden -DLIBFREEHAND_VISIBILITY -Wall -Wextra -Wshadow -pedantic -c FHPath.cpp -fPIC -DPIC -o .libs/FHPath.o
libtool: compile: g++ -DHAVE_CONFIG_H -I. -I../.. -Wdate-time -D_FORTIFY_SOURCE=2 -DLIBFREEHAND_BUILD=1 -I../../inc -I/usr/include/librevenge-0.0 -pthread -DNDEBUG -g -O2 -ffile-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -fvisibility=hidden -DLIBFREEHAND_VISIBILITY -Wall -Wextra -Wshadow -pedantic -c FHParser.cpp -fPIC -DPIC -o .libs/FHParser.o
libtool: compile: g++ -DHAVE_CONFIG_H -I. -I../.. -Wdate-time -D_FORTIFY_SOURCE=2 -DLIBFREEHAND_BUILD=1 -I../../inc -I/usr/include/librevenge-0.0 -pthread -DNDEBUG -g -O2 -ffile-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -fvisibility=hidden -DLIBFREEHAND_VISIBILITY -Wall -Wextra -Wshadow -pedantic -c libfreehand_utils.cpp -fPIC -DPIC -o .libs/libfreehand_utils.o
libtool: compile: g++ -DHAVE_CONFIG_H -I. -I../.. -Wdate-time -D_FORTIFY_SOURCE=2 -DLIBFREEHAND_BUILD=1 -I../../inc -I/usr/include/librevenge-0.0 -pthread -DNDEBUG -g -O2 -ffile-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -fvisibility=hidden -DLIBFREEHAND_VISIBILITY -Wall -Wextra -Wshadow -pedantic -c FHInternalStream.cpp -fPIC -DPIC -o .libs/FHInternalStream.o
libtool: compile: g++ -DHAVE_CONFIG_H -I. -I../.. -Wdate-time -D_FORTIFY_SOURCE=2 -DLIBFREEHAND_BUILD=1 -I../../inc -I/usr/include/librevenge-0.0 -pthread -DNDEBUG -g -O2 -ffile-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -fvisibility=hidden -DLIBFREEHAND_VISIBILITY -Wall -Wextra -Wshadow -pedantic -c FHTransform.cpp -fPIC -DPIC -o .libs/FHTransform.o
FHCollector.cpp: In member function ‘void libfreehand::FHCollector::collectXform(unsigned int, double, double, double, double, double, double)’:
FHCollector.cpp:285:68: warning: implicitly-declared ‘constexpr libfreehand::FHTransform& libfreehand::FHTransform::operator=(const libfreehand::FHTransform&)’ is deprecated [-Wdeprecated-copy]
285 | m_transforms[recordId] = FHTransform(m11, m21, m12, m22, m13, m23);
| ^
In file included from FHCollector.h:18,
from FHCollector.cpp:14:
FHTransform.h:22:3: note: because ‘libfreehand::FHTransform’ has user-provided ‘libfreehand::FHTransform::FHTransform(const libfreehand::FHTransform&)’
22 | FHTransform(const FHTransform &trafo);
| ^~~~~~~~~~~
FHCollector.cpp: In member function ‘void libfreehand::FHCollector::_outputDisplayText(const libfreehand::FHDisplayText*, librevenge::RVNGDrawingInterface*)’:
FHCollector.cpp:1910:17: warning: unnecessary parentheses in declaration of ‘padding’ [-Wparentheses]
1910 | char const *(padding[])= {"fo:padding-left","fo:padding-right","fo:padding-top","fo:padding-bottom"};
| ^~~~~~~~~~~
FHCollector.cpp:1910:17: note: remove parentheses
1910 | char const *(padding[])= {"fo:padding-left","fo:padding-right","fo:padding-top","fo:padding-bottom"};
| ^~~~~~~~~~~
| - -
In file included from /usr/include/c++/14/bits/stl_algobase.h:64,
from /usr/include/c++/14/algorithm:60,
from FHParser.cpp:10:
/usr/include/c++/14/bits/stl_pair.h: In instantiation of ‘constexpr std::pair<typename std::__strip_reference_wrapper<typename std::decay<_Tp>::type>::__type, typename std::__strip_reference_wrapper<typename std::decay<_Tp2>::type>::__type> std::make_pair(_T1&&, _T2&&) [with _T1 = double&; _T2 = double&; typename __strip_reference_wrapper<typename decay<_Tp>::type>::__type = double; typename decay<_Tp>::type = double; typename __strip_reference_wrapper<typename decay<_Tp2>::type>::__type = double; typename decay<_Tp2>::type = double]’:
FHParser.cpp:1677:60: required from here
1677 | std::pair<double, double> tmpPoint = std::make_pair(x, y);
| ~~~~~~~~~~~~~~^~~~~~
/usr/include/c++/14/bits/stl_pair.h:1132:5: note: parameter passing for argument of type ‘std::pair<double, double>’ when C++17 is enabled changed to match C++14 in GCC 10.1
1132 | make_pair(_T1&& __x, _T2&& __y)
| ^~~~~~~~~
/bin/bash ../../libtool --tag=CXX --mode=link g++ -DLIBFREEHAND_BUILD=1 -I../../inc -I/usr/include/librevenge-0.0 -pthread -DNDEBUG -g -O2 -ffile-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -fvisibility=hidden -DLIBFREEHAND_VISIBILITY -Wall -Wextra -Wshadow -pedantic -Wl,-z,relro -o libfreehand-internal.la FHCollector.lo FHInternalStream.lo FHParser.lo FHPath.lo FHTransform.lo libfreehand_utils.lo
libtool: link: ar cr .libs/libfreehand-internal.a .libs/FHCollector.o .libs/FHInternalStream.o .libs/FHParser.o .libs/FHPath.o .libs/FHTransform.o .libs/libfreehand_utils.o
libtool: link: ranlib .libs/libfreehand-internal.a
libtool: link: ( cd ".libs" && rm -f "libfreehand-internal.la" && ln -s "../libfreehand-internal.la" "libfreehand-internal.la" )
/bin/bash ../../libtool --tag=CXX --mode=link g++ -DLIBFREEHAND_BUILD=1 -I../../inc -I/usr/include/librevenge-0.0 -pthread -DNDEBUG -g -O2 -ffile-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -fvisibility=hidden -DLIBFREEHAND_VISIBILITY -Wall -Wextra -Wshadow -pedantic -version-info 1:2:0 -export-dynamic -no-undefined -Wl,-z,relro -o libfreehand-0.1.la -rpath /usr/lib/aarch64-linux-gnu FreeHandDocument.lo libfreehand-internal.la -lrevenge-0.0 -lz -llcms2 -llcms2_fast_float -llcms2_threaded -pthread -lm
libtool: link: g++ -fPIC -DPIC -shared -nostdlib /usr/lib/gcc/aarch64-linux-gnu/14/../../../aarch64-linux-gnu/crti.o /usr/lib/gcc/aarch64-linux-gnu/14/crtbeginS.o .libs/FreeHandDocument.o -Wl,--whole-archive ./.libs/libfreehand-internal.a -Wl,--no-whole-archive -lrevenge-0.0 -lz -llcms2 -llcms2_fast_float -llcms2_threaded -L/usr/lib/gcc/aarch64-linux-gnu/14 -L/usr/lib/gcc/aarch64-linux-gnu/14/../../../aarch64-linux-gnu -L/usr/lib/gcc/aarch64-linux-gnu/14/../../../../lib -L/lib/aarch64-linux-gnu -L/lib/../lib -L/usr/lib/aarch64-linux-gnu -L/usr/lib/../lib -L/usr/lib/gcc/aarch64-linux-gnu/14/../../.. -lstdc++ -lm -lc -lgcc_s /usr/lib/gcc/aarch64-linux-gnu/14/crtendS.o /usr/lib/gcc/aarch64-linux-gnu/14/../../../aarch64-linux-gnu/crtn.o -g -O2 -fstack-protector-strong -mbranch-protection=standard -Wl,-z -Wl,relro -pthread -Wl,-soname -Wl,libfreehand-0.1.so.1 -o .libs/libfreehand-0.1.so.1.0.2
libtool: link: (cd ".libs" && rm -f "libfreehand-0.1.so.1" && ln -s "libfreehand-0.1.so.1.0.2" "libfreehand-0.1.so.1")
libtool: link: (cd ".libs" && rm -f "libfreehand-0.1.so" && ln -s "libfreehand-0.1.so.1.0.2" "libfreehand-0.1.so")
libtool: link: ( cd ".libs" && rm -f "libfreehand-0.1.la" && ln -s "../libfreehand-0.1.la" "libfreehand-0.1.la" )
make[5]: Leaving directory '/<<PKGBUILDDIR>>/src/lib'
make[4]: Leaving directory '/<<PKGBUILDDIR>>/src/lib'
Making all in conv
make[4]: Entering directory '/<<PKGBUILDDIR>>/src/conv'
Making all in raw
make[5]: Entering directory '/<<PKGBUILDDIR>>/src/conv/raw'
g++ -DHAVE_CONFIG_H -I. -I../../.. -Wdate-time -D_FORTIFY_SOURCE=2 -I../../../inc -I/usr/include/librevenge-0.0 -I/usr/include/librevenge-0.0 -I/usr/include/librevenge-0.0 -DNDEBUG -g -O2 -ffile-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -fvisibility=hidden -DLIBFREEHAND_VISIBILITY -Wall -Wextra -Wshadow -pedantic -c -o fh2raw.o fh2raw.cpp
/bin/bash ../../../libtool --tag=CXX --mode=link g++ -I../../../inc -I/usr/include/librevenge-0.0 -I/usr/include/librevenge-0.0 -I/usr/include/librevenge-0.0 -DNDEBUG -g -O2 -ffile-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -fvisibility=hidden -DLIBFREEHAND_VISIBILITY -Wall -Wextra -Wshadow -pedantic -Wl,-z,relro -o fh2raw fh2raw.o ../../lib/libfreehand-0.1.la -lrevenge-generators-0.0 -lrevenge-0.0 -lrevenge-0.0 -lrevenge-stream-0.0
libtool: link: g++ -I../../../inc -I/usr/include/librevenge-0.0 -I/usr/include/librevenge-0.0 -I/usr/include/librevenge-0.0 -DNDEBUG -g -O2 -ffile-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -fvisibility=hidden -DLIBFREEHAND_VISIBILITY -Wall -Wextra -Wshadow -pedantic -Wl,-z -Wl,relro -o .libs/fh2raw fh2raw.o ../../lib/.libs/libfreehand-0.1.so -lrevenge-generators-0.0 -lrevenge-0.0 -lrevenge-stream-0.0 -pthread
make[5]: Leaving directory '/<<PKGBUILDDIR>>/src/conv/raw'
Making all in svg
make[5]: Entering directory '/<<PKGBUILDDIR>>/src/conv/svg'
g++ -DHAVE_CONFIG_H -I. -I../../.. -Wdate-time -D_FORTIFY_SOURCE=2 -I../../../inc -I/usr/include/librevenge-0.0 -I/usr/include/librevenge-0.0 -DNDEBUG -g -O2 -ffile-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -fvisibility=hidden -DLIBFREEHAND_VISIBILITY -Wall -Wextra -Wshadow -pedantic -c -o fh2svg.o fh2svg.cpp
/bin/bash ../../../libtool --tag=CXX --mode=link g++ -I../../../inc -I/usr/include/librevenge-0.0 -I/usr/include/librevenge-0.0 -DNDEBUG -g -O2 -ffile-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -fvisibility=hidden -DLIBFREEHAND_VISIBILITY -Wall -Wextra -Wshadow -pedantic -Wl,-z,relro -o fh2svg fh2svg.o ../../lib/libfreehand-0.1.la -lrevenge-0.0 -lrevenge-stream-0.0
libtool: link: g++ -I../../../inc -I/usr/include/librevenge-0.0 -I/usr/include/librevenge-0.0 -DNDEBUG -g -O2 -ffile-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -fvisibility=hidden -DLIBFREEHAND_VISIBILITY -Wall -Wextra -Wshadow -pedantic -Wl,-z -Wl,relro -o .libs/fh2svg fh2svg.o ../../lib/.libs/libfreehand-0.1.so -lrevenge-0.0 -lrevenge-stream-0.0 -pthread
make[5]: Leaving directory '/<<PKGBUILDDIR>>/src/conv/svg'
Making all in text
make[5]: Entering directory '/<<PKGBUILDDIR>>/src/conv/text'
g++ -DHAVE_CONFIG_H -I. -I../../.. -Wdate-time -D_FORTIFY_SOURCE=2 -I../../../inc -I/usr/include/librevenge-0.0 -I/usr/include/librevenge-0.0 -DNDEBUG -g -O2 -ffile-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -fvisibility=hidden -DLIBFREEHAND_VISIBILITY -Wall -Wextra -Wshadow -pedantic -c -o fh2text.o fh2text.cpp
/bin/bash ../../../libtool --tag=CXX --mode=link g++ -I../../../inc -I/usr/include/librevenge-0.0 -I/usr/include/librevenge-0.0 -DNDEBUG -g -O2 -ffile-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -fvisibility=hidden -DLIBFREEHAND_VISIBILITY -Wall -Wextra -Wshadow -pedantic -Wl,-z,relro -o fh2text fh2text.o ../../lib/libfreehand-0.1.la -lrevenge-generators-0.0 -lrevenge-0.0 -lrevenge-stream-0.0
libtool: link: g++ -I../../../inc -I/usr/include/librevenge-0.0 -I/usr/include/librevenge-0.0 -DNDEBUG -g -O2 -ffile-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -fvisibility=hidden -DLIBFREEHAND_VISIBILITY -Wall -Wextra -Wshadow -pedantic -Wl,-z -Wl,relro -o .libs/fh2text fh2text.o ../../lib/.libs/libfreehand-0.1.so -lrevenge-generators-0.0 -lrevenge-0.0 -lrevenge-stream-0.0 -pthread
make[5]: Leaving directory '/<<PKGBUILDDIR>>/src/conv/text'
make[5]: Entering directory '/<<PKGBUILDDIR>>/src/conv'
make[5]: Nothing to be done for 'all-am'.
make[5]: Leaving directory '/<<PKGBUILDDIR>>/src/conv'
make[4]: Leaving directory '/<<PKGBUILDDIR>>/src/conv'
Making all in test
make[4]: Entering directory '/<<PKGBUILDDIR>>/src/test'
make[4]: Nothing to be done for 'all'.
make[4]: Leaving directory '/<<PKGBUILDDIR>>/src/test'
make[4]: Entering directory '/<<PKGBUILDDIR>>/src'
make[4]: Nothing to be done for 'all-am'.
make[4]: Leaving directory '/<<PKGBUILDDIR>>/src'
make[3]: Leaving directory '/<<PKGBUILDDIR>>/src'
Making all in docs
make[3]: Entering directory '/<<PKGBUILDDIR>>/docs'
Making all in doxygen
make[4]: Entering directory '/<<PKGBUILDDIR>>/docs/doxygen'
make[4]: Nothing to be done for 'all'.
make[4]: Leaving directory '/<<PKGBUILDDIR>>/docs/doxygen'
make[4]: Entering directory '/<<PKGBUILDDIR>>/docs'
make[4]: Nothing to be done for 'all-am'.
make[4]: Leaving directory '/<<PKGBUILDDIR>>/docs'
make[3]: Leaving directory '/<<PKGBUILDDIR>>/docs'
make[3]: Entering directory '/<<PKGBUILDDIR>>'
make[3]: Leaving directory '/<<PKGBUILDDIR>>'
make[2]: Leaving directory '/<<PKGBUILDDIR>>'
make[1]: Leaving directory '/<<PKGBUILDDIR>>'
dh_auto_test
make -j16 check "TESTSUITEFLAGS=-j16 --verbose" VERBOSE=1
make[1]: Entering directory '/<<PKGBUILDDIR>>'
Making check in build
make[2]: Entering directory '/<<PKGBUILDDIR>>/build'
Making check in win32
make[3]: Entering directory '/<<PKGBUILDDIR>>/build/win32'
make[3]: Nothing to be done for 'check'.
make[3]: Leaving directory '/<<PKGBUILDDIR>>/build/win32'
make[3]: Entering directory '/<<PKGBUILDDIR>>/build'
make[3]: Nothing to be done for 'check-am'.
make[3]: Leaving directory '/<<PKGBUILDDIR>>/build'
make[2]: Leaving directory '/<<PKGBUILDDIR>>/build'
Making check in inc
make[2]: Entering directory '/<<PKGBUILDDIR>>/inc'
Making check in libfreehand
make[3]: Entering directory '/<<PKGBUILDDIR>>/inc/libfreehand'
make[3]: Nothing to be done for 'check'.
make[3]: Leaving directory '/<<PKGBUILDDIR>>/inc/libfreehand'
make[3]: Entering directory '/<<PKGBUILDDIR>>/inc'
make[3]: Nothing to be done for 'check-am'.
make[3]: Leaving directory '/<<PKGBUILDDIR>>/inc'
make[2]: Leaving directory '/<<PKGBUILDDIR>>/inc'
Making check in src
make[2]: Entering directory '/<<PKGBUILDDIR>>/src'
Making check in lib
make[3]: Entering directory '/<<PKGBUILDDIR>>/src/lib'
make check-am
make[4]: Entering directory '/<<PKGBUILDDIR>>/src/lib'
make[4]: Nothing to be done for 'check-am'.
make[4]: Leaving directory '/<<PKGBUILDDIR>>/src/lib'
make[3]: Leaving directory '/<<PKGBUILDDIR>>/src/lib'
Making check in conv
make[3]: Entering directory '/<<PKGBUILDDIR>>/src/conv'
Making check in raw
make[4]: Entering directory '/<<PKGBUILDDIR>>/src/conv/raw'
make[4]: Nothing to be done for 'check'.
make[4]: Leaving directory '/<<PKGBUILDDIR>>/src/conv/raw'
Making check in svg
make[4]: Entering directory '/<<PKGBUILDDIR>>/src/conv/svg'
make[4]: Nothing to be done for 'check'.
make[4]: Leaving directory '/<<PKGBUILDDIR>>/src/conv/svg'
Making check in text
make[4]: Entering directory '/<<PKGBUILDDIR>>/src/conv/text'
make[4]: Nothing to be done for 'check'.
make[4]: Leaving directory '/<<PKGBUILDDIR>>/src/conv/text'
make[4]: Entering directory '/<<PKGBUILDDIR>>/src/conv'
make[4]: Nothing to be done for 'check-am'.
make[4]: Leaving directory '/<<PKGBUILDDIR>>/src/conv'
make[3]: Leaving directory '/<<PKGBUILDDIR>>/src/conv'
Making check in test
make[3]: Entering directory '/<<PKGBUILDDIR>>/src/test'
make test
make[4]: Entering directory '/<<PKGBUILDDIR>>/src/test'
g++ -DHAVE_CONFIG_H -I. -I../.. -Wdate-time -D_FORTIFY_SOURCE=2 -I../../inc -I../../src/lib -I/usr/include/librevenge-0.0 -DNDEBUG -g -O2 -ffile-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -fvisibility=hidden -DLIBFREEHAND_VISIBILITY -Wall -Wextra -Wshadow -pedantic -c -o FHInternalStreamTest.o FHInternalStreamTest.cpp
g++ -DHAVE_CONFIG_H -I. -I../.. -Wdate-time -D_FORTIFY_SOURCE=2 -I../../inc -I../../src/lib -I/usr/include/librevenge-0.0 -DNDEBUG -g -O2 -ffile-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -fvisibility=hidden -DLIBFREEHAND_VISIBILITY -Wall -Wextra -Wshadow -pedantic -c -o test.o test.cpp
/bin/bash ../../libtool --tag=CXX --mode=link g++ -I../../inc -I../../src/lib -I/usr/include/librevenge-0.0 -DNDEBUG -g -O2 -ffile-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -fvisibility=hidden -DLIBFREEHAND_VISIBILITY -Wall -Wextra -Wshadow -pedantic -L../../src/lib -Wl,-z,relro -o test FHInternalStreamTest.o test.o ../../src/lib/libfreehand-internal.la -lcppunit -lrevenge-0.0 -lz
libtool: link: g++ -I../../inc -I../../src/lib -I/usr/include/librevenge-0.0 -DNDEBUG -g -O2 -ffile-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -fvisibility=hidden -DLIBFREEHAND_VISIBILITY -Wall -Wextra -Wshadow -pedantic -Wl,-z -Wl,relro -o test FHInternalStreamTest.o test.o -L../../src/lib ../../src/lib/.libs/libfreehand-internal.a -lcppunit -lrevenge-0.0 -lz -pthread
make[4]: Leaving directory '/<<PKGBUILDDIR>>/src/test'
make check-TESTS
make[4]: Entering directory '/<<PKGBUILDDIR>>/src/test'
make[5]: Entering directory '/<<PKGBUILDDIR>>/src/test'
PASS: test
============================================================================
Testsuite summary for libfreehand 0.1.2
============================================================================
# TOTAL: 1
# PASS: 1
# SKIP: 0
# XFAIL: 0
# FAIL: 0
# XPASS: 0
# ERROR: 0
============================================================================
make[5]: Leaving directory '/<<PKGBUILDDIR>>/src/test'
make[4]: Leaving directory '/<<PKGBUILDDIR>>/src/test'
make[3]: Leaving directory '/<<PKGBUILDDIR>>/src/test'
make[3]: Entering directory '/<<PKGBUILDDIR>>/src'
make[3]: Nothing to be done for 'check-am'.
make[3]: Leaving directory '/<<PKGBUILDDIR>>/src'
make[2]: Leaving directory '/<<PKGBUILDDIR>>/src'
Making check in docs
make[2]: Entering directory '/<<PKGBUILDDIR>>/docs'
Making check in doxygen
make[3]: Entering directory '/<<PKGBUILDDIR>>/docs/doxygen'
make[3]: Nothing to be done for 'check'.
make[3]: Leaving directory '/<<PKGBUILDDIR>>/docs/doxygen'
make[3]: Entering directory '/<<PKGBUILDDIR>>/docs'
make[3]: Nothing to be done for 'check-am'.
make[3]: Leaving directory '/<<PKGBUILDDIR>>/docs'
make[2]: Leaving directory '/<<PKGBUILDDIR>>/docs'
make[2]: Entering directory '/<<PKGBUILDDIR>>'
make[2]: Leaving directory '/<<PKGBUILDDIR>>'
make[1]: Leaving directory '/<<PKGBUILDDIR>>'
create-stamp debian/debhelper-build-stamp
dh_prep
dh_installdirs
dh_auto_install
make -j1 install DESTDIR=/<<PKGBUILDDIR>>/debian/tmp AM_UPDATE_INFO_DIR=no
make[1]: Entering directory '/<<PKGBUILDDIR>>'
Making install in build
make[2]: Entering directory '/<<PKGBUILDDIR>>/build'
Making install in win32
make[3]: Entering directory '/<<PKGBUILDDIR>>/build/win32'
make[4]: Entering directory '/<<PKGBUILDDIR>>/build/win32'
make[4]: Nothing to be done for 'install-exec-am'.
make[4]: Nothing to be done for 'install-data-am'.
make[4]: Leaving directory '/<<PKGBUILDDIR>>/build/win32'
make[3]: Leaving directory '/<<PKGBUILDDIR>>/build/win32'
make[3]: Entering directory '/<<PKGBUILDDIR>>/build'
make[4]: Entering directory '/<<PKGBUILDDIR>>/build'
make[4]: Nothing to be done for 'install-exec-am'.
make[4]: Nothing to be done for 'install-data-am'.
make[4]: Leaving directory '/<<PKGBUILDDIR>>/build'
make[3]: Leaving directory '/<<PKGBUILDDIR>>/build'
make[2]: Leaving directory '/<<PKGBUILDDIR>>/build'
Making install in inc
make[2]: Entering directory '/<<PKGBUILDDIR>>/inc'
Making install in libfreehand
make[3]: Entering directory '/<<PKGBUILDDIR>>/inc/libfreehand'
make[4]: Entering directory '/<<PKGBUILDDIR>>/inc/libfreehand'
make[4]: Nothing to be done for 'install-exec-am'.
/usr/bin/mkdir -p '/<<PKGBUILDDIR>>/debian/tmp/usr/include/libfreehand-0.1/libfreehand'
/usr/bin/install -c -m 644 libfreehand.h FreeHandDocument.h '/<<PKGBUILDDIR>>/debian/tmp/usr/include/libfreehand-0.1/libfreehand'
make[4]: Leaving directory '/<<PKGBUILDDIR>>/inc/libfreehand'
make[3]: Leaving directory '/<<PKGBUILDDIR>>/inc/libfreehand'
make[3]: Entering directory '/<<PKGBUILDDIR>>/inc'
make[4]: Entering directory '/<<PKGBUILDDIR>>/inc'
make[4]: Nothing to be done for 'install-exec-am'.
make[4]: Nothing to be done for 'install-data-am'.
make[4]: Leaving directory '/<<PKGBUILDDIR>>/inc'
make[3]: Leaving directory '/<<PKGBUILDDIR>>/inc'
make[2]: Leaving directory '/<<PKGBUILDDIR>>/inc'
Making install in src
make[2]: Entering directory '/<<PKGBUILDDIR>>/src'
Making install in lib
make[3]: Entering directory '/<<PKGBUILDDIR>>/src/lib'
make install-am
make[4]: Entering directory '/<<PKGBUILDDIR>>/src/lib'
make[5]: Entering directory '/<<PKGBUILDDIR>>/src/lib'
/usr/bin/mkdir -p '/<<PKGBUILDDIR>>/debian/tmp/usr/lib/aarch64-linux-gnu'
/bin/bash ../../libtool --mode=install /usr/bin/install -c libfreehand-0.1.la '/<<PKGBUILDDIR>>/debian/tmp/usr/lib/aarch64-linux-gnu'
libtool: install: /usr/bin/install -c .libs/libfreehand-0.1.so.1.0.2 /<<PKGBUILDDIR>>/debian/tmp/usr/lib/aarch64-linux-gnu/libfreehand-0.1.so.1.0.2
libtool: install: (cd /<<PKGBUILDDIR>>/debian/tmp/usr/lib/aarch64-linux-gnu && { ln -s -f libfreehand-0.1.so.1.0.2 libfreehand-0.1.so.1 || { rm -f libfreehand-0.1.so.1 && ln -s libfreehand-0.1.so.1.0.2 libfreehand-0.1.so.1; }; })
libtool: install: (cd /<<PKGBUILDDIR>>/debian/tmp/usr/lib/aarch64-linux-gnu && { ln -s -f libfreehand-0.1.so.1.0.2 libfreehand-0.1.so || { rm -f libfreehand-0.1.so && ln -s libfreehand-0.1.so.1.0.2 libfreehand-0.1.so; }; })
libtool: install: /usr/bin/install -c .libs/libfreehand-0.1.lai /<<PKGBUILDDIR>>/debian/tmp/usr/lib/aarch64-linux-gnu/libfreehand-0.1.la
libtool: warning: remember to run 'libtool --finish /usr/lib/aarch64-linux-gnu'
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '/<<PKGBUILDDIR>>/src/lib'
make[4]: Leaving directory '/<<PKGBUILDDIR>>/src/lib'
make[3]: Leaving directory '/<<PKGBUILDDIR>>/src/lib'
Making install in conv
make[3]: Entering directory '/<<PKGBUILDDIR>>/src/conv'
Making install in raw
make[4]: Entering directory '/<<PKGBUILDDIR>>/src/conv/raw'
make[5]: Entering directory '/<<PKGBUILDDIR>>/src/conv/raw'
/usr/bin/mkdir -p '/<<PKGBUILDDIR>>/debian/tmp/usr/bin'
/bin/bash ../../../libtool --mode=install /usr/bin/install -c fh2raw '/<<PKGBUILDDIR>>/debian/tmp/usr/bin'
libtool: warning: '../../lib/libfreehand-0.1.la' has not been installed in '/usr/lib/aarch64-linux-gnu'
libtool: install: /usr/bin/install -c .libs/fh2raw /<<PKGBUILDDIR>>/debian/tmp/usr/bin/fh2raw
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '/<<PKGBUILDDIR>>/src/conv/raw'
make[4]: Leaving directory '/<<PKGBUILDDIR>>/src/conv/raw'
Making install in svg
make[4]: Entering directory '/<<PKGBUILDDIR>>/src/conv/svg'
make[5]: Entering directory '/<<PKGBUILDDIR>>/src/conv/svg'
/usr/bin/mkdir -p '/<<PKGBUILDDIR>>/debian/tmp/usr/bin'
/bin/bash ../../../libtool --mode=install /usr/bin/install -c fh2svg '/<<PKGBUILDDIR>>/debian/tmp/usr/bin'
libtool: warning: '../../lib/libfreehand-0.1.la' has not been installed in '/usr/lib/aarch64-linux-gnu'
libtool: install: /usr/bin/install -c .libs/fh2svg /<<PKGBUILDDIR>>/debian/tmp/usr/bin/fh2svg
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '/<<PKGBUILDDIR>>/src/conv/svg'
make[4]: Leaving directory '/<<PKGBUILDDIR>>/src/conv/svg'
Making install in text
make[4]: Entering directory '/<<PKGBUILDDIR>>/src/conv/text'
make[5]: Entering directory '/<<PKGBUILDDIR>>/src/conv/text'
/usr/bin/mkdir -p '/<<PKGBUILDDIR>>/debian/tmp/usr/bin'
/bin/bash ../../../libtool --mode=install /usr/bin/install -c fh2text '/<<PKGBUILDDIR>>/debian/tmp/usr/bin'
libtool: warning: '../../lib/libfreehand-0.1.la' has not been installed in '/usr/lib/aarch64-linux-gnu'
libtool: install: /usr/bin/install -c .libs/fh2text /<<PKGBUILDDIR>>/debian/tmp/usr/bin/fh2text
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '/<<PKGBUILDDIR>>/src/conv/text'
make[4]: Leaving directory '/<<PKGBUILDDIR>>/src/conv/text'
make[4]: Entering directory '/<<PKGBUILDDIR>>/src/conv'
make[5]: Entering directory '/<<PKGBUILDDIR>>/src/conv'
make[5]: Nothing to be done for 'install-exec-am'.
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '/<<PKGBUILDDIR>>/src/conv'
make[4]: Leaving directory '/<<PKGBUILDDIR>>/src/conv'
make[3]: Leaving directory '/<<PKGBUILDDIR>>/src/conv'
Making install in test
make[3]: Entering directory '/<<PKGBUILDDIR>>/src/test'
make[4]: Entering directory '/<<PKGBUILDDIR>>/src/test'
make[4]: Nothing to be done for 'install-exec-am'.
make[4]: Nothing to be done for 'install-data-am'.
make[4]: Leaving directory '/<<PKGBUILDDIR>>/src/test'
make[3]: Leaving directory '/<<PKGBUILDDIR>>/src/test'
make[3]: Entering directory '/<<PKGBUILDDIR>>/src'
make[4]: Entering directory '/<<PKGBUILDDIR>>/src'
make[4]: Nothing to be done for 'install-exec-am'.
make[4]: Nothing to be done for 'install-data-am'.
make[4]: Leaving directory '/<<PKGBUILDDIR>>/src'
make[3]: Leaving directory '/<<PKGBUILDDIR>>/src'
make[2]: Leaving directory '/<<PKGBUILDDIR>>/src'
Making install in docs
make[2]: Entering directory '/<<PKGBUILDDIR>>/docs'
Making install in doxygen
make[3]: Entering directory '/<<PKGBUILDDIR>>/docs/doxygen'
make[4]: Entering directory '/<<PKGBUILDDIR>>/docs/doxygen'
make[4]: Nothing to be done for 'install-exec-am'.
make[4]: Nothing to be done for 'install-data-am'.
make[4]: Leaving directory '/<<PKGBUILDDIR>>/docs/doxygen'
make[3]: Leaving directory '/<<PKGBUILDDIR>>/docs/doxygen'
make[3]: Entering directory '/<<PKGBUILDDIR>>/docs'
make[4]: Entering directory '/<<PKGBUILDDIR>>/docs'
make[4]: Nothing to be done for 'install-exec-am'.
make[4]: Nothing to be done for 'install-data-am'.
make[4]: Leaving directory '/<<PKGBUILDDIR>>/docs'
make[3]: Leaving directory '/<<PKGBUILDDIR>>/docs'
make[2]: Leaving directory '/<<PKGBUILDDIR>>/docs'
make[2]: Entering directory '/<<PKGBUILDDIR>>'
make[3]: Entering directory '/<<PKGBUILDDIR>>'
make[3]: Nothing to be done for 'install-exec-am'.
/usr/bin/mkdir -p '/<<PKGBUILDDIR>>/debian/tmp/usr/lib/aarch64-linux-gnu/pkgconfig'
/usr/bin/install -c -m 644 libfreehand-0.1.pc '/<<PKGBUILDDIR>>/debian/tmp/usr/lib/aarch64-linux-gnu/pkgconfig'
make[3]: Leaving directory '/<<PKGBUILDDIR>>'
make[2]: Leaving directory '/<<PKGBUILDDIR>>'
make[1]: Leaving directory '/<<PKGBUILDDIR>>'
dh_install
dh_installdocs
dh_installchangelogs
dh_perl
dh_link
dh_strip_nondeterminism
dh_compress
dh_fixperms
dh_missing
dh_strip
dh_makeshlibs
dh_shlibdeps
dpkg-shlibdeps: warning: diversions involved - output may be incorrect
diversion by libc6 from: /lib/ld-linux-aarch64.so.1
dpkg-shlibdeps: warning: diversions involved - output may be incorrect
diversion by libc6 to: /lib/ld-linux-aarch64.so.1.usr-is-merged
dh_installdeb
dh_gencontrol
dh_md5sums
dh_builddeb
dpkg-deb: building package 'libfreehand-dev' in '../libfreehand-dev_0.1.2-3_arm64.deb'.
dpkg-deb: building package 'libfreehand-0.1-1' in '../libfreehand-0.1-1_0.1.2-3_arm64.deb'.
dpkg-deb: building package 'libfreehand-0.1-1-dbgsym' in '../libfreehand-0.1-1-dbgsym_0.1.2-3_arm64.deb'.
dpkg-genbuildinfo --build=binary -O../libfreehand_0.1.2-3_arm64.buildinfo
dpkg-genchanges --build=binary -O../libfreehand_0.1.2-3_arm64.changes
dpkg-genchanges: info: binary-only upload (no source code included)
dpkg-source --after-build .
dpkg-buildpackage: info: binary-only upload (no source included)
--------------------------------------------------------------------------------
Build finished at 2024-11-17T00:21:16Z
Finished
--------
I: Built successfully
+------------------------------------------------------------------------------+
| Changes |
+------------------------------------------------------------------------------+
libfreehand_0.1.2-3_arm64.changes:
----------------------------------
Format: 1.8
Date: Mon, 22 Jun 2020 18:46:32 +0200
Source: libfreehand
Binary: libfreehand-0.1-1 libfreehand-0.1-1-dbgsym libfreehand-dev
Architecture: arm64
Version: 0.1.2-3
Distribution: sid
Urgency: medium
Maintainer: Debian LibreOffice Maintainers <debian-openoffice@lists.debian.org>
Changed-By: Rene Engelhard <rene@debian.org>
Description:
libfreehand-0.1-1 - Library for parsing the FreeHand file format structure
libfreehand-dev - Library for parsing the FreeHand file format structure -- develop
Closes: 963285
Changes:
libfreehand (0.1.2-3) unstable; urgency=medium
.
* debian/patches/icu-65-api-macros-with-semicolon.patch.1: import from
LO master, fix build with ICU >= 65 (closes: #963285)
Checksums-Sha1:
15cfa4934a27b18e78080d8aeb3f372c13fe880c 1476004 libfreehand-0.1-1-dbgsym_0.1.2-3_arm64.deb
8c9f7df941338b552cf7569e8f3c34e95b6b949d 267900 libfreehand-0.1-1_0.1.2-3_arm64.deb
ece3ac99cefdf0b4edeb1e7afb7605d83587f378 36020 libfreehand-dev_0.1.2-3_arm64.deb
c9932359043a7c7f17b1ddcaae6f712f56442c75 5697 libfreehand_0.1.2-3_arm64.buildinfo
Checksums-Sha256:
07a1652e566f3e697e2f1edde6b50c7cbd31d76c45009e412093f995e1742032 1476004 libfreehand-0.1-1-dbgsym_0.1.2-3_arm64.deb
8c3c3978472b03f10d8f9282976972ee947d07e51da30266e6b752d2633e9513 267900 libfreehand-0.1-1_0.1.2-3_arm64.deb
c1ebe876f26c73f1c7ba19728366bf58ae115bd478dd0ea86d679140fc32f7f1 36020 libfreehand-dev_0.1.2-3_arm64.deb
81446059e1f3663a3a397d53523aed042153bacadf19f8298f04a093e95a4fb1 5697 libfreehand_0.1.2-3_arm64.buildinfo
Files:
d2db84af04618078b8698123f5740953 1476004 debug optional libfreehand-0.1-1-dbgsym_0.1.2-3_arm64.deb
b03073f87410924b7af15a7a1d462a9a 267900 libs optional libfreehand-0.1-1_0.1.2-3_arm64.deb
808c09ecaccc6272ee7dd7d3cf9adc4e 36020 libdevel optional libfreehand-dev_0.1.2-3_arm64.deb
bb1d4300453b03d9b68cf0e8c28b7c9f 5697 libs optional libfreehand_0.1.2-3_arm64.buildinfo
+------------------------------------------------------------------------------+
| Buildinfo |
+------------------------------------------------------------------------------+
Format: 1.0
Source: libfreehand
Binary: libfreehand-0.1-1 libfreehand-0.1-1-dbgsym libfreehand-dev
Architecture: arm64
Version: 0.1.2-3
Checksums-Md5:
d2db84af04618078b8698123f5740953 1476004 libfreehand-0.1-1-dbgsym_0.1.2-3_arm64.deb
b03073f87410924b7af15a7a1d462a9a 267900 libfreehand-0.1-1_0.1.2-3_arm64.deb
808c09ecaccc6272ee7dd7d3cf9adc4e 36020 libfreehand-dev_0.1.2-3_arm64.deb
Checksums-Sha1:
15cfa4934a27b18e78080d8aeb3f372c13fe880c 1476004 libfreehand-0.1-1-dbgsym_0.1.2-3_arm64.deb
8c9f7df941338b552cf7569e8f3c34e95b6b949d 267900 libfreehand-0.1-1_0.1.2-3_arm64.deb
ece3ac99cefdf0b4edeb1e7afb7605d83587f378 36020 libfreehand-dev_0.1.2-3_arm64.deb
Checksums-Sha256:
07a1652e566f3e697e2f1edde6b50c7cbd31d76c45009e412093f995e1742032 1476004 libfreehand-0.1-1-dbgsym_0.1.2-3_arm64.deb
8c3c3978472b03f10d8f9282976972ee947d07e51da30266e6b752d2633e9513 267900 libfreehand-0.1-1_0.1.2-3_arm64.deb
c1ebe876f26c73f1c7ba19728366bf58ae115bd478dd0ea86d679140fc32f7f1 36020 libfreehand-dev_0.1.2-3_arm64.deb
Build-Origin: Debian
Build-Architecture: arm64
Build-Date: Sun, 17 Nov 2024 00:21:16 +0000
Build-Path: /<<PKGBUILDDIR>>
Build-Tainted-By:
merged-usr-via-aliased-dirs
Installed-Build-Depends:
autoconf (= 2.72-3),
automake (= 1:1.16.5-1.3),
autopoint (= 0.22.5-2),
autotools-dev (= 20220109.1),
base-files (= 13.5),
base-passwd (= 3.6.5),
bash (= 5.2.32-1+b2),
binutils (= 2.43.1-5),
binutils-aarch64-linux-gnu (= 2.43.1-5),
binutils-common (= 2.43.1-5),
bsdextrautils (= 2.40.2-11),
bsdutils (= 1:2.40.2-11),
build-essential (= 12.12),
bzip2 (= 1.0.8-6),
coreutils (= 9.5-1+b1),
cpp (= 4:14.2.0-1),
cpp-14 (= 14.2.0-8),
cpp-14-aarch64-linux-gnu (= 14.2.0-8),
cpp-aarch64-linux-gnu (= 4:14.2.0-1),
dash (= 0.5.12-9+b1),
debconf (= 1.5.87),
debhelper (= 13.20),
debianutils (= 5.21),
dh-autoreconf (= 20),
dh-strip-nondeterminism (= 1.14.0-1),
diffutils (= 1:3.10-1+b1),
dpkg (= 1.22.12~1.gbp82cafd),
dpkg-dev (= 1.22.12~1.gbp82cafd),
dwz (= 0.15-1+b1),
file (= 1:5.45-3+b1),
findutils (= 4.10.0-3),
g++ (= 4:14.2.0-1),
g++-14 (= 14.2.0-8),
g++-14-aarch64-linux-gnu (= 14.2.0-8),
g++-aarch64-linux-gnu (= 4:14.2.0-1),
gcc (= 4:14.2.0-1),
gcc-14 (= 14.2.0-8),
gcc-14-aarch64-linux-gnu (= 14.2.0-8),
gcc-14-base (= 14.2.0-8),
gcc-aarch64-linux-gnu (= 4:14.2.0-1),
gettext (= 0.22.5-2),
gettext-base (= 0.22.5-2),
gperf (= 3.1-1+b1),
grep (= 3.11-4+b1),
groff-base (= 1.23.0-5),
gzip (= 1.12-1.1+b1),
hostname (= 3.25),
icu-devtools (= 72.1-5+b1),
init-system-helpers (= 1.67),
intltool-debian (= 0.35.0+20060710.6),
libacl1 (= 2.3.2-2+b1),
libarchive-zip-perl (= 1.68-1),
libasan8 (= 14.2.0-8),
libatomic1 (= 14.2.0-8),
libattr1 (= 1:2.5.2-2),
libaudit-common (= 1:4.0.2-2),
libaudit1 (= 1:4.0.2-2),
libbinutils (= 2.43.1-5),
libblkid1 (= 2.40.2-11),
libboost-dev (= 1.83.0.2+b2),
libboost1.83-dev (= 1.83.0-3.2+b1),
libbz2-1.0 (= 1.0.8-6),
libc-bin (= 2.40-3),
libc-dev-bin (= 2.40-3),
libc6 (= 2.40-3),
libc6-dev (= 2.40-3),
libcap-ng0 (= 0.8.5-3+b1),
libcap2 (= 1:2.66-5+b1),
libcc1-0 (= 14.2.0-8),
libcppunit-1.15-0 (= 1.15.1-4+b2),
libcppunit-dev (= 1.15.1-4+b2),
libcrypt-dev (= 1:4.4.36-5),
libcrypt1 (= 1:4.4.36-5),
libctf-nobfd0 (= 2.43.1-5),
libctf0 (= 2.43.1-5),
libdb5.3t64 (= 5.3.28+dfsg2-9),
libdebconfclient0 (= 0.273),
libdebhelper-perl (= 13.20),
libdpkg-perl (= 1.22.12~1.gbp82cafd),
libelf1t64 (= 0.192-4),
libfile-stripnondeterminism-perl (= 1.14.0-1),
libgcc-14-dev (= 14.2.0-8),
libgcc-s1 (= 14.2.0-8),
libgdbm-compat4t64 (= 1.24-2),
libgdbm6t64 (= 1.24-2),
libgmp10 (= 2:6.3.0+dfsg-2+b2),
libgomp1 (= 14.2.0-8),
libgprofng0 (= 2.43.1-5),
libhwasan0 (= 14.2.0-8),
libicu-dev (= 72.1-5+b1),
libicu72 (= 72.1-5+b1),
libisl23 (= 0.27-1),
libitm1 (= 14.2.0-8),
libjansson4 (= 2.14-2+b3),
liblcms2-2 (= 2.16-2),
liblcms2-dev (= 2.16-2),
liblsan0 (= 14.2.0-8),
liblzma5 (= 5.6.3-1+b1),
libmagic-mgc (= 1:5.45-3+b1),
libmagic1t64 (= 1:5.45-3+b1),
libmd0 (= 1.1.0-2+b1),
libmount1 (= 2.40.2-11),
libmpc3 (= 1.3.1-1+b3),
libmpfr6 (= 4.2.1-1+b2),
libpam-modules (= 1.5.3-7+b1),
libpam-modules-bin (= 1.5.3-7+b1),
libpam-runtime (= 1.5.3-7),
libpam0g (= 1.5.3-7+b1),
libpcre2-8-0 (= 10.44-4),
libperl5.40 (= 5.40.0-7),
libpipeline1 (= 1.5.8-1),
libpkgconf3 (= 1.8.1-4),
librevenge-0.0-0 (= 0.0.5-3+b2),
librevenge-dev (= 0.0.5-3+b2),
libseccomp2 (= 2.5.5-1+b3),
libselinux1 (= 3.7-3+b1),
libsframe1 (= 2.43.1-5),
libsmartcols1 (= 2.40.2-11),
libssl3t64 (= 3.3.2-2),
libstdc++-14-dev (= 14.2.0-8),
libstdc++6 (= 14.2.0-8),
libsystemd0 (= 257~rc2-3),
libtinfo6 (= 6.5-2+b1),
libtool (= 2.4.7-8),
libtsan2 (= 14.2.0-8),
libubsan1 (= 14.2.0-8),
libuchardet0 (= 0.0.8-1+b2),
libudev1 (= 257~rc2-3),
libunistring5 (= 1.2-1+b1),
libuuid1 (= 2.40.2-11),
libxml2 (= 2.12.7+dfsg+really2.9.14-0.2+b1),
libzstd1 (= 1.5.6+dfsg-1+b1),
linux-libc-dev (= 6.11.7-1),
m4 (= 1.4.19-4),
make (= 4.3-4.1+b1),
man-db (= 2.13.0-1),
mawk (= 1.3.4.20240905-1),
ncurses-base (= 6.5-2),
ncurses-bin (= 6.5-2+b1),
openssl-provider-legacy (= 3.3.2-2),
patch (= 2.7.6-7+b1),
perl (= 5.40.0-7),
perl-base (= 5.40.0-7),
perl-modules-5.40 (= 5.40.0-7),
pkg-config (= 1.8.1-4),
pkgconf (= 1.8.1-4),
pkgconf-bin (= 1.8.1-4),
po-debconf (= 1.0.21+nmu1),
rpcsvc-proto (= 1.4.3-1+b1),
sed (= 4.9-2+b1),
sensible-utils (= 0.0.24),
sysvinit-utils (= 3.11-1),
tar (= 1.35+dfsg-3+b1),
util-linux (= 2.40.2-11),
xz-utils (= 5.6.3-1+b1),
zlib1g (= 1:1.3.dfsg+really1.3.1-1+b1),
zlib1g-dev (= 1:1.3.dfsg+really1.3.1-1+b1)
Environment:
DEB_BUILD_OPTIONS="parallel=16"
LANG="en_US.UTF-8"
LC_ALL="C.UTF-8"
SOURCE_DATE_EPOCH="1592844392"
+------------------------------------------------------------------------------+
| Package contents |
+------------------------------------------------------------------------------+
libfreehand-0.1-1-dbgsym_0.1.2-3_arm64.deb
------------------------------------------
new Debian package, version 2.0.
size 1476004 bytes: control archive=540 bytes.
400 bytes, 12 lines control
106 bytes, 1 lines md5sums
Package: libfreehand-0.1-1-dbgsym
Source: libfreehand
Version: 0.1.2-3
Auto-Built-Package: debug-symbols
Architecture: arm64
Maintainer: Debian LibreOffice Maintainers <debian-openoffice@lists.debian.org>
Installed-Size: 1539
Depends: libfreehand-0.1-1 (= 0.1.2-3)
Section: debug
Priority: optional
Description: debug symbols for libfreehand-0.1-1
Build-Ids: 982c543f168a53174378f3860844cb35ef0bb58f
drwxr-xr-x root/root 0 2020-06-22 16:46 ./
drwxr-xr-x root/root 0 2020-06-22 16:46 ./usr/
drwxr-xr-x root/root 0 2020-06-22 16:46 ./usr/lib/
drwxr-xr-x root/root 0 2020-06-22 16:46 ./usr/lib/debug/
drwxr-xr-x root/root 0 2020-06-22 16:46 ./usr/lib/debug/.build-id/
drwxr-xr-x root/root 0 2020-06-22 16:46 ./usr/lib/debug/.build-id/98/
-rw-r--r-- root/root 1565400 2020-06-22 16:46 ./usr/lib/debug/.build-id/98/2c543f168a53174378f3860844cb35ef0bb58f.debug
drwxr-xr-x root/root 0 2020-06-22 16:46 ./usr/share/
drwxr-xr-x root/root 0 2020-06-22 16:46 ./usr/share/doc/
lrwxrwxrwx root/root 0 2020-06-22 16:46 ./usr/share/doc/libfreehand-0.1-1-dbgsym -> libfreehand-0.1-1
libfreehand-0.1-1_0.1.2-3_arm64.deb
-----------------------------------
new Debian package, version 2.0.
size 267900 bytes: control archive=900 bytes.
601 bytes, 13 lines control
326 bytes, 4 lines md5sums
36 bytes, 1 lines shlibs
66 bytes, 2 lines triggers
Package: libfreehand-0.1-1
Source: libfreehand
Version: 0.1.2-3
Architecture: arm64
Maintainer: Debian LibreOffice Maintainers <debian-openoffice@lists.debian.org>
Installed-Size: 528
Depends: libc6 (>= 2.38), libgcc-s1 (>= 3.0), liblcms2-2 (>= 2.2+git20110628), librevenge-0.0-0, libstdc++6 (>= 11), zlib1g (>= 1:1.1.4)
Section: libs
Priority: optional
Homepage: http://freedesktop.org/wiki/Software/libfreehand
Description: Library for parsing the FreeHand file format structure
Libfreehand is library providing ability to interpret and import
Adobe/Macromedia drawings into various applications.
drwxr-xr-x root/root 0 2020-06-22 16:46 ./
drwxr-xr-x root/root 0 2020-06-22 16:46 ./usr/
drwxr-xr-x root/root 0 2020-06-22 16:46 ./usr/lib/
drwxr-xr-x root/root 0 2020-06-22 16:46 ./usr/lib/aarch64-linux-gnu/
lrwxrwxrwx root/root 0 2020-06-22 16:46 ./usr/lib/aarch64-linux-gnu/libfreehand-0.1.so.1 -> libfreehand-0.1.so.1.0.2
-rw-r--r-- root/root 461952 2020-06-22 16:46 ./usr/lib/aarch64-linux-gnu/libfreehand-0.1.so.1.0.2
drwxr-xr-x root/root 0 2020-06-22 16:46 ./usr/share/
drwxr-xr-x root/root 0 2020-06-22 16:46 ./usr/share/doc/
drwxr-xr-x root/root 0 2020-06-22 16:46 ./usr/share/doc/libfreehand-0.1-1/
-rw-r--r-- root/root 487 2020-06-22 16:46 ./usr/share/doc/libfreehand-0.1-1/changelog.Debian.gz
-rw-r--r-- root/root 21201 2017-09-16 11:17 ./usr/share/doc/libfreehand-0.1-1/changelog.gz
-rw-r--r-- root/root 43719 2017-09-17 10:27 ./usr/share/doc/libfreehand-0.1-1/copyright
libfreehand-dev_0.1.2-3_arm64.deb
---------------------------------
new Debian package, version 2.0.
size 36020 bytes: control archive=888 bytes.
598 bytes, 15 lines control
577 bytes, 7 lines md5sums
Package: libfreehand-dev
Source: libfreehand
Version: 0.1.2-3
Architecture: arm64
Maintainer: Debian LibreOffice Maintainers <debian-openoffice@lists.debian.org>
Installed-Size: 83
Depends: libfreehand-0.1-1 (= 0.1.2-3), librevenge-dev
Section: libdevel
Priority: optional
Homepage: http://freedesktop.org/wiki/Software/libfreehand
Description: Library for parsing the FreeHand file format structure -- development
Libfreehand is library providing ability to interpret and import
Adobe/Macromedia drawings into various applications.
.
This package contains the development files (headers, ...)
drwxr-xr-x root/root 0 2020-06-22 16:46 ./
drwxr-xr-x root/root 0 2020-06-22 16:46 ./usr/
drwxr-xr-x root/root 0 2020-06-22 16:46 ./usr/include/
drwxr-xr-x root/root 0 2020-06-22 16:46 ./usr/include/libfreehand-0.1/
drwxr-xr-x root/root 0 2020-06-22 16:46 ./usr/include/libfreehand-0.1/libfreehand/
-rw-r--r-- root/root 1053 2020-06-22 16:46 ./usr/include/libfreehand-0.1/libfreehand/FreeHandDocument.h
-rw-r--r-- root/root 485 2020-06-22 16:46 ./usr/include/libfreehand-0.1/libfreehand/libfreehand.h
drwxr-xr-x root/root 0 2020-06-22 16:46 ./usr/lib/
drwxr-xr-x root/root 0 2020-06-22 16:46 ./usr/lib/aarch64-linux-gnu/
lrwxrwxrwx root/root 0 2020-06-22 16:46 ./usr/lib/aarch64-linux-gnu/libfreehand-0.1.so -> libfreehand-0.1.so.1.0.2
drwxr-xr-x root/root 0 2020-06-22 16:46 ./usr/lib/aarch64-linux-gnu/pkgconfig/
-rw-r--r-- root/root 401 2020-06-22 16:46 ./usr/lib/aarch64-linux-gnu/pkgconfig/libfreehand-0.1.pc
drwxr-xr-x root/root 0 2020-06-22 16:46 ./usr/share/
drwxr-xr-x root/root 0 2020-06-22 16:46 ./usr/share/doc/
drwxr-xr-x root/root 0 2020-06-22 16:46 ./usr/share/doc/libfreehand-dev/
-rw-r--r-- root/root 470 2017-09-16 10:47 ./usr/share/doc/libfreehand-dev/NEWS.gz
-rw-r--r-- root/root 485 2020-06-22 16:46 ./usr/share/doc/libfreehand-dev/changelog.Debian.gz
-rw-r--r-- root/root 21201 2017-09-16 11:17 ./usr/share/doc/libfreehand-dev/changelog.gz
-rw-r--r-- root/root 43719 2017-09-17 10:27 ./usr/share/doc/libfreehand-dev/copyright
lintian
-------
Setup apt archive
-----------------
Merged Build-Depends: lintian
Filtered Build-Depends: lintian
dpkg-deb: warning: root directory has unusual owner or group 998:999.
Hint: either pass --root-owner-group, see dpkg-build-api(7) or add an explicit 'Rules-Requires-Root: no' in debian/control.
dpkg-deb: warning: ignoring 1 warning about the control file(s)
dpkg-deb: building package 'sbuild-build-depends-lintian-dummy' in '/<<RESOLVERDIR>>/apt_archive/sbuild-build-depends-lintian-dummy.deb'.
Ign:1 copy:/<<RESOLVERDIR>>/apt_archive ./ InRelease
Get:2 copy:/<<RESOLVERDIR>>/apt_archive ./ Release [615 B]
Ign:3 copy:/<<RESOLVERDIR>>/apt_archive ./ Release.gpg
Get:4 copy:/<<RESOLVERDIR>>/apt_archive ./ Sources [1326 B]
Get:5 copy:/<<RESOLVERDIR>>/apt_archive ./ Packages [1388 B]
Fetched 3329 B in 0s (299 kB/s)
Reading package lists...
Get:1 file:/<<BUILDDIR>>/resolver-8f6fXv/apt_archive ./ InRelease
Ign:1 file:/<<BUILDDIR>>/resolver-8f6fXv/apt_archive ./ InRelease
Get:2 file:/<<BUILDDIR>>/resolver-8f6fXv/apt_archive ./ Release [606 B]
Get:2 file:/<<BUILDDIR>>/resolver-8f6fXv/apt_archive ./ Release [606 B]
Get:3 file:/<<BUILDDIR>>/resolver-8f6fXv/apt_archive ./ Release.gpg
Ign:3 file:/<<BUILDDIR>>/resolver-8f6fXv/apt_archive ./ Release.gpg
Reading package lists...
Reading package lists...
Install lintian build dependencies (apt-based resolver)
-------------------------------------------------------
Installing build dependencies
Reading package lists...
Building dependency tree...
Reading state information...
The following NEW packages will be installed:
sbuild-build-depends-lintian-dummy
0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded.
Need to get 856 B of archives.
After this operation, 0 B of additional disk space will be used.
Get:1 copy:/<<RESOLVERDIR>>/apt_archive ./ sbuild-build-depends-lintian-dummy 0.invalid.0 [856 B]
debconf: delaying package configuration, since apt-utils is not installed
Fetched 856 B in 0s (0 B/s)
Selecting previously unselected package sbuild-build-depends-lintian-dummy.
(Reading database ... 40031 files and directories currently installed.)
Preparing to unpack .../sbuild-build-depends-lintian-dummy_0.invalid.0_arm64.deb ...
Unpacking sbuild-build-depends-lintian-dummy (0.invalid.0) ...
Setting up sbuild-build-depends-lintian-dummy (0.invalid.0) ...
Running lintian...
W: libfreehand source: build-depends-on-obsolete-package Build-Depends: pkg-config => pkgconf
W: libfreehand changes: distribution-and-changes-mismatch sid unstable
W: libfreehand source: pipe-symbol-used-as-license-disjunction mpl-1.1 | gpl-3+ | lgpl-3+ [debian/copyright:377]
W: libfreehand source: space-in-std-shortname-in-dep5-copyright mpl-1.1 | gpl-3+ | lgpl-3+ [debian/copyright:377]
W: libfreehand source: useless-autoreconf-build-depends (does not need to satisfy autotools-dev:any)
W: libfreehand source: useless-autoreconf-build-depends (does not need to satisfy dh-autoreconf:any)
I: Lintian run was successful.
+------------------------------------------------------------------------------+
| Post Build |
+------------------------------------------------------------------------------+
+------------------------------------------------------------------------------+
| Cleanup |
+------------------------------------------------------------------------------+
Purging /<<BUILDDIR>>
Not cleaning session: cloned chroot in use
+------------------------------------------------------------------------------+
| Summary |
+------------------------------------------------------------------------------+
Build Architecture: arm64
Build Type: binary
Build-Space: 47236
Build-Time: 42
Distribution: sid
Host Architecture: arm64
Install-Time: 25
Job: /tmp/debusine-fetch-exec-upload-8sx5319d/libfreehand_0.1.2-3.dsc
Lintian: warn
Machine Architecture: arm64
Package: libfreehand
Package-Time: 103
Source-Version: 0.1.2-3
Space: 47236
Status: successful
Version: 0.1.2-3
--------------------------------------------------------------------------------
Finished at 2024-11-17T00:21:16Z
Build needed 00:01:43, 47236k disk space