sbuild (Debian sbuild) 0.86.3~bpo12+1 (03 November 2024) on debusine-worker-arm64-demeter-10.freexian.com
+==============================================================================+
| libobject-insideout-perl 4.05-2 (arm64) Sun, 17 Nov 2024 03:40:09 +0000 |
+==============================================================================+
Package: libobject-insideout-perl
Version: 4.05-2
Source Version: 4.05-2
Distribution: sid
Machine Architecture: arm64
Host Architecture: arm64
Build Architecture: arm64
Build Type: binary
I: No tarballs found in /var/lib/debusine/worker/.cache/sbuild
Unpacking /var/lib/debusine/worker/system-images/957781/system.tar.xz to /tmp/tmp.sbuild.BKOnNaUp0Y...
I: NOTICE: Log filtering will replace 'sbuild-unshare-dummy-location' with '<<CHROOT>>'
+------------------------------------------------------------------------------+
| Chroot Setup Commands |
+------------------------------------------------------------------------------+
rm -f /etc/resolv.conf
----------------------
I: Finished running 'rm -f /etc/resolv.conf'.
Finished processing commands.
--------------------------------------------------------------------------------
Copying /tmp/debusine-fetch-exec-upload-10ra1sgn/dpkg-dbgsym_1.22.12~1.gbp82cafd_arm64.deb to /<<CHROOT>>...
Copying /tmp/debusine-fetch-exec-upload-10ra1sgn/dpkg_1.22.12~1.gbp82cafd_arm64.deb to /<<CHROOT>>...
Copying /tmp/debusine-fetch-exec-upload-10ra1sgn/dselect-dbgsym_1.22.12~1.gbp82cafd_arm64.deb to /<<CHROOT>>...
Copying /tmp/debusine-fetch-exec-upload-10ra1sgn/dselect_1.22.12~1.gbp82cafd_arm64.deb to /<<CHROOT>>...
Copying /tmp/debusine-fetch-exec-upload-10ra1sgn/libdpkg-dev_1.22.12~1.gbp82cafd_arm64.deb to /<<CHROOT>>...
Copying /tmp/debusine-fetch-exec-upload-10ra1sgn/dpkg-dev_1.22.12~1.gbp82cafd_all.deb to /<<CHROOT>>...
Copying /tmp/debusine-fetch-exec-upload-10ra1sgn/libdpkg-perl_1.22.12~1.gbp82cafd_all.deb to /<<CHROOT>>...
I: NOTICE: Log filtering will replace 'build/libobject-insideout-perl-7fuUao/resolver-W0v5a7' with '<<RESOLVERDIR>>'
+------------------------------------------------------------------------------+
| Update chroot |
+------------------------------------------------------------------------------+
Get:1 file:/build/libobject-insideout-perl-7fuUao/resolver-bWOKjY/apt_archive ./ InRelease
Ign:1 file:/build/libobject-insideout-perl-7fuUao/resolver-bWOKjY/apt_archive ./ InRelease
Get:2 file:/build/libobject-insideout-perl-7fuUao/resolver-bWOKjY/apt_archive ./ Release [606 B]
Get:2 file:/build/libobject-insideout-perl-7fuUao/resolver-bWOKjY/apt_archive ./ Release [606 B]
Get:3 file:/build/libobject-insideout-perl-7fuUao/resolver-bWOKjY/apt_archive ./ Release.gpg
Ign:3 file:/build/libobject-insideout-perl-7fuUao/resolver-bWOKjY/apt_archive ./ Release.gpg
Get:4 file:/build/libobject-insideout-perl-7fuUao/resolver-bWOKjY/apt_archive ./ Packages [9246 B]
Get:5 http://deb.debian.org/debian sid InRelease [202 kB]
Get:6 http://deb.debian.org/debian sid/main arm64 Packages [9952 kB]
Get:7 http://deb.debian.org/debian sid/main arm64 Components [4907 kB]
Fetched 15.1 MB in 2s (6322 kB/s)
Reading package lists...
Reading package lists...
Building dependency tree...
Reading state information...
Calculating upgrade...
The following packages will be upgraded:
apt bsdextrautils bsdutils debianutils dpkg dpkg-dev libapt-pkg6.0t64
libaudit-common libaudit1 libblkid1 libbrotli1 libcap-ng0 libdpkg-perl
libglib2.0-0t64 libmarkdown2 libmount1 libpcre2-8-0 libseccomp2 libselinux1
libsemanage2 libsmartcols1 libsystemd0 libudev1 libuuid1 libxml2 login
login.defs mount passwd util-linux
30 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
Need to get 9274 kB/12.8 MB of archives.
After this operation, 603 kB disk space will be freed.
Get:1 file:/build/libobject-insideout-perl-7fuUao/resolver-bWOKjY/apt_archive ./ dpkg 1.22.12~1.gbp82cafd [1513 kB]
Get:2 http://deb.debian.org/debian sid/main arm64 bsdutils arm64 1:2.40.2-11 [104 kB]
Get:3 file:/build/libobject-insideout-perl-7fuUao/resolver-bWOKjY/apt_archive ./ dpkg-dev 1.22.12~1.gbp82cafd [1337 kB]
Get:4 http://deb.debian.org/debian sid/main arm64 debianutils arm64 5.21 [92.1 kB]
Get:5 http://deb.debian.org/debian sid/main arm64 libsystemd0 arm64 257~rc2-3 [416 kB]
Get:6 file:/build/libobject-insideout-perl-7fuUao/resolver-bWOKjY/apt_archive ./ libdpkg-perl 1.22.12~1.gbp82cafd [647 kB]
Get:7 http://deb.debian.org/debian sid/main arm64 libudev1 arm64 257~rc2-3 [139 kB]
Get:8 http://deb.debian.org/debian sid/main arm64 libapt-pkg6.0t64 arm64 2.9.11 [921 kB]
Get:9 http://deb.debian.org/debian sid/main arm64 bsdextrautils arm64 2.40.2-11 [91.2 kB]
Get:10 http://deb.debian.org/debian sid/main arm64 libblkid1 arm64 2.40.2-11 [162 kB]
Get:11 http://deb.debian.org/debian sid/main arm64 libmount1 arm64 2.40.2-11 [190 kB]
Get:12 http://deb.debian.org/debian sid/main arm64 libsmartcols1 arm64 2.40.2-11 [135 kB]
Get:13 http://deb.debian.org/debian sid/main arm64 mount arm64 2.40.2-11 [153 kB]
Get:14 http://deb.debian.org/debian sid/main arm64 libuuid1 arm64 2.40.2-11 [35.7 kB]
Get:15 http://deb.debian.org/debian sid/main arm64 util-linux arm64 2.40.2-11 [1170 kB]
Get:16 http://deb.debian.org/debian sid/main arm64 libpcre2-8-0 arm64 10.44-4 [243 kB]
Get:17 http://deb.debian.org/debian sid/main arm64 libselinux1 arm64 3.7-3+b1 [72.1 kB]
Get:18 http://deb.debian.org/debian sid/main arm64 libseccomp2 arm64 2.5.5-1+b3 [46.8 kB]
Get:19 http://deb.debian.org/debian sid/main arm64 apt arm64 2.9.11 [1287 kB]
Get:20 http://deb.debian.org/debian sid/main arm64 libaudit-common all 1:4.0.2-2 [12.7 kB]
Get:21 http://deb.debian.org/debian sid/main arm64 libcap-ng0 arm64 0.8.5-3+b1 [17.0 kB]
Get:22 http://deb.debian.org/debian sid/main arm64 libaudit1 arm64 1:4.0.2-2 [54.2 kB]
Get:23 http://deb.debian.org/debian sid/main arm64 login arm64 1:4.16.0-2+really2.40.2-11 [80.0 kB]
Get:24 http://deb.debian.org/debian sid/main arm64 login.defs all 1:4.16.0-5 [185 kB]
Get:25 http://deb.debian.org/debian sid/main arm64 libsemanage2 arm64 3.7-2+b1 [84.5 kB]
Get:26 http://deb.debian.org/debian sid/main arm64 passwd arm64 1:4.16.0-5 [1210 kB]
Get:27 http://deb.debian.org/debian sid/main arm64 libbrotli1 arm64 1.1.0-2+b6 [297 kB]
Get:28 http://deb.debian.org/debian sid/main arm64 libglib2.0-0t64 arm64 2.82.2-3 [1411 kB]
Get:29 http://deb.debian.org/debian sid/main arm64 libmarkdown2 arm64 2.2.7-2.1 [33.1 kB]
Get:30 http://deb.debian.org/debian sid/main arm64 libxml2 arm64 2.12.7+dfsg+really2.9.14-0.2+b1 [630 kB]
debconf: delaying package configuration, since apt-utils is not installed
Fetched 9274 kB in 0s (60.4 MB/s)
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 17129 files and directories currently installed.)
Preparing to unpack .../bsdutils_1%3a2.40.2-11_arm64.deb ...
Unpacking bsdutils (1:2.40.2-11) over (1:2.40.2-10) ...
Setting up bsdutils (1:2.40.2-11) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 17129 files and directories currently installed.)
Preparing to unpack .../debianutils_5.21_arm64.deb ...
Unpacking debianutils (5.21) over (5.20+b1) ...
Setting up debianutils (5.21) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 17128 files and directories currently installed.)
Preparing to unpack .../libsystemd0_257~rc2-3_arm64.deb ...
Unpacking libsystemd0:arm64 (257~rc2-3) over (257~rc1-4) ...
Setting up libsystemd0:arm64 (257~rc2-3) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 17128 files and directories currently installed.)
Preparing to unpack .../libudev1_257~rc2-3_arm64.deb ...
Unpacking libudev1:arm64 (257~rc2-3) over (257~rc1-4) ...
Setting up libudev1:arm64 (257~rc2-3) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 17128 files and directories currently installed.)
Preparing to unpack .../libapt-pkg6.0t64_2.9.11_arm64.deb ...
Unpacking libapt-pkg6.0t64:arm64 (2.9.11) over (2.9.10) ...
Setting up libapt-pkg6.0t64:arm64 (2.9.11) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 17128 files and directories currently installed.)
Preparing to unpack .../dpkg_1.22.12~1.gbp82cafd_arm64.deb ...
Unpacking dpkg (1.22.12~1.gbp82cafd) over (1.22.11) ...
Setting up dpkg (1.22.12~1.gbp82cafd) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 17127 files and directories currently installed.)
Preparing to unpack .../bsdextrautils_2.40.2-11_arm64.deb ...
Unpacking bsdextrautils (2.40.2-11) over (2.40.2-10) ...
Preparing to unpack .../libblkid1_2.40.2-11_arm64.deb ...
Unpacking libblkid1:arm64 (2.40.2-11) over (2.40.2-10) ...
Setting up libblkid1:arm64 (2.40.2-11) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 17123 files and directories currently installed.)
Preparing to unpack .../libmount1_2.40.2-11_arm64.deb ...
Unpacking libmount1:arm64 (2.40.2-11) over (2.40.2-10) ...
Setting up libmount1:arm64 (2.40.2-11) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 17123 files and directories currently installed.)
Preparing to unpack .../libsmartcols1_2.40.2-11_arm64.deb ...
Unpacking libsmartcols1:arm64 (2.40.2-11) over (2.40.2-10) ...
Setting up libsmartcols1:arm64 (2.40.2-11) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 17123 files and directories currently installed.)
Preparing to unpack .../mount_2.40.2-11_arm64.deb ...
Unpacking mount (2.40.2-11) over (2.40.2-10) ...
Preparing to unpack .../libuuid1_2.40.2-11_arm64.deb ...
Unpacking libuuid1:arm64 (2.40.2-11) over (2.40.2-10) ...
Setting up libuuid1:arm64 (2.40.2-11) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 17123 files and directories currently installed.)
Preparing to unpack .../util-linux_2.40.2-11_arm64.deb ...
Unpacking util-linux (2.40.2-11) over (2.40.2-10) ...
Setting up util-linux (2.40.2-11) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 17120 files and directories currently installed.)
Preparing to unpack .../libpcre2-8-0_10.44-4_arm64.deb ...
Unpacking libpcre2-8-0:arm64 (10.44-4) over (10.42-4+b2) ...
Setting up libpcre2-8-0:arm64 (10.44-4) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 17119 files and directories currently installed.)
Preparing to unpack .../libselinux1_3.7-3+b1_arm64.deb ...
Unpacking libselinux1:arm64 (3.7-3+b1) over (3.7-3) ...
Setting up libselinux1:arm64 (3.7-3+b1) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 17120 files and directories currently installed.)
Preparing to unpack .../libseccomp2_2.5.5-1+b3_arm64.deb ...
Unpacking libseccomp2:arm64 (2.5.5-1+b3) over (2.5.5-1+b2) ...
Setting up libseccomp2:arm64 (2.5.5-1+b3) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 17120 files and directories currently installed.)
Preparing to unpack .../archives/apt_2.9.11_arm64.deb ...
Unpacking apt (2.9.11) over (2.9.10) ...
Setting up apt (2.9.11) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 17117 files and directories currently installed.)
Preparing to unpack .../libaudit-common_1%3a4.0.2-2_all.deb ...
Unpacking libaudit-common (1:4.0.2-2) over (1:4.0.1-3) ...
Setting up libaudit-common (1:4.0.2-2) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 17117 files and directories currently installed.)
Preparing to unpack .../libcap-ng0_0.8.5-3+b1_arm64.deb ...
Unpacking libcap-ng0:arm64 (0.8.5-3+b1) over (0.8.5-3) ...
Setting up libcap-ng0:arm64 (0.8.5-3+b1) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 17118 files and directories currently installed.)
Preparing to unpack .../libaudit1_1%3a4.0.2-2_arm64.deb ...
Unpacking libaudit1:arm64 (1:4.0.2-2) over (1:4.0.1-3) ...
Setting up libaudit1:arm64 (1:4.0.2-2) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 17118 files and directories currently installed.)
Preparing to unpack .../0-login_1%3a4.16.0-2+really2.40.2-11_arm64.deb ...
Unpacking login (1:4.16.0-2+really2.40.2-11) over (1:4.16.0-2+really2.40.2-10) ...
Preparing to unpack .../1-login.defs_1%3a4.16.0-5_all.deb ...
Unpacking login.defs (1:4.16.0-5) over (1:4.16.0-4) ...
Preparing to unpack .../2-libsemanage2_3.7-2+b1_arm64.deb ...
Unpacking libsemanage2:arm64 (3.7-2+b1) over (3.7-2) ...
Preparing to unpack .../3-passwd_1%3a4.16.0-5_arm64.deb ...
Unpacking passwd (1:4.16.0-5) over (1:4.16.0-4) ...
Preparing to unpack .../4-dpkg-dev_1.22.12~1.gbp82cafd_all.deb ...
Unpacking dpkg-dev (1.22.12~1.gbp82cafd) over (1.22.11) ...
Preparing to unpack .../5-libdpkg-perl_1.22.12~1.gbp82cafd_all.deb ...
Unpacking libdpkg-perl (1.22.12~1.gbp82cafd) over (1.22.11) ...
Preparing to unpack .../6-libbrotli1_1.1.0-2+b6_arm64.deb ...
Unpacking libbrotli1:arm64 (1.1.0-2+b6) over (1.1.0-2+b5) ...
Preparing to unpack .../7-libglib2.0-0t64_2.82.2-3_arm64.deb ...
Unpacking libglib2.0-0t64:arm64 (2.82.2-3) over (2.82.2-2) ...
Preparing to unpack .../8-libmarkdown2_2.2.7-2.1_arm64.deb ...
Unpacking libmarkdown2:arm64 (2.2.7-2.1) over (2.2.7-2+b1) ...
Preparing to unpack .../9-libxml2_2.12.7+dfsg+really2.9.14-0.2+b1_arm64.deb ...
Unpacking libxml2:arm64 (2.12.7+dfsg+really2.9.14-0.2+b1) over (2.12.7+dfsg+really2.9.14-0.1) ...
Setting up bsdextrautils (2.40.2-11) ...
Setting up login.defs (1:4.16.0-5) ...
Installing new version of config file /etc/login.defs ...
Setting up libbrotli1:arm64 (1.1.0-2+b6) ...
Setting up libglib2.0-0t64:arm64 (2.82.2-3) ...
No schema files found: doing nothing.
Setting up libdpkg-perl (1.22.12~1.gbp82cafd) ...
Setting up mount (2.40.2-11) ...
Setting up libsemanage2:arm64 (3.7-2+b1) ...
Setting up libxml2:arm64 (2.12.7+dfsg+really2.9.14-0.2+b1) ...
Setting up libmarkdown2:arm64 (2.2.7-2.1) ...
Setting up login (1:4.16.0-2+really2.40.2-11) ...
Setting up dpkg-dev (1.22.12~1.gbp82cafd) ...
Setting up passwd (1:4.16.0-5) ...
Processing triggers for man-db (2.13.0-1) ...
Processing triggers for libc-bin (2.40-3) ...
+------------------------------------------------------------------------------+
| Fetch source files |
+------------------------------------------------------------------------------+
Local sources
-------------
/tmp/debusine-fetch-exec-upload-10ra1sgn/libobject-insideout-perl_4.05-2.dsc exists in /tmp/debusine-fetch-exec-upload-10ra1sgn; copying to chroot
I: NOTICE: Log filtering will replace 'build/libobject-insideout-perl-7fuUao/libobject-insideout-perl-4.05' with '<<PKGBUILDDIR>>'
I: NOTICE: Log filtering will replace 'build/libobject-insideout-perl-7fuUao' with '<<BUILDDIR>>'
+------------------------------------------------------------------------------+
| Install package build dependencies |
+------------------------------------------------------------------------------+
Setup apt archive
-----------------
Merged Build-Depends: debhelper-compat (= 13), libmodule-build-perl, build-essential, fakeroot, libexception-class-perl, libwant-perl, perl
Filtered Build-Depends: debhelper-compat (= 13), libmodule-build-perl, build-essential, fakeroot, libexception-class-perl, libwant-perl, perl
dpkg-deb: warning: root directory has unusual owner or group 998:999.
Hint: either pass --root-owner-group, see dpkg-build-api(7) or add an explicit 'Rules-Requires-Root: no' in debian/control.
dpkg-deb: warning: ignoring 1 warning about the control file(s)
dpkg-deb: building package 'sbuild-build-depends-main-dummy' in '/<<RESOLVERDIR>>/apt_archive/sbuild-build-depends-main-dummy.deb'.
Ign:1 copy:/<<RESOLVERDIR>>/apt_archive ./ InRelease
Get:2 copy:/<<RESOLVERDIR>>/apt_archive ./ Release [609 B]
Ign:3 copy:/<<RESOLVERDIR>>/apt_archive ./ Release.gpg
Get:4 copy:/<<RESOLVERDIR>>/apt_archive ./ Sources [704 B]
Get:5 copy:/<<RESOLVERDIR>>/apt_archive ./ Packages [716 B]
Fetched 2029 B in 0s (169 kB/s)
Reading package lists...
Get:1 file:/<<BUILDDIR>>/resolver-bWOKjY/apt_archive ./ InRelease
Ign:1 file:/<<BUILDDIR>>/resolver-bWOKjY/apt_archive ./ InRelease
Get:2 file:/<<BUILDDIR>>/resolver-bWOKjY/apt_archive ./ Release [606 B]
Get:2 file:/<<BUILDDIR>>/resolver-bWOKjY/apt_archive ./ Release [606 B]
Get:3 file:/<<BUILDDIR>>/resolver-bWOKjY/apt_archive ./ Release.gpg
Ign:3 file:/<<BUILDDIR>>/resolver-bWOKjY/apt_archive ./ Release.gpg
Reading package lists...
Reading package lists...
Install main build dependencies (apt-based resolver)
----------------------------------------------------
Installing build dependencies
Reading package lists...
Building dependency tree...
Reading state information...
The following additional packages will be installed:
autoconf automake autopoint autotools-dev build-essential cpp cpp-14
cpp-14-aarch64-linux-gnu cpp-aarch64-linux-gnu debhelper dh-autoreconf
dh-strip-nondeterminism dwz fakeroot g++ g++-14 g++-14-aarch64-linux-gnu
g++-aarch64-linux-gnu gcc gcc-14 gcc-14-aarch64-linux-gnu
gcc-aarch64-linux-gnu libasan8 libc-dev-bin libc6-dev libcc1-0 libcrypt-dev
libdebhelper-perl libelf1t64 libfakeroot libfile-stripnondeterminism-perl
libgcc-14-dev libhwasan0 libisl23 libitm1 liblsan0 libmodule-build-perl
libmpc3 libmpfr6 libstdc++-14-dev libtool libtsan2 libubsan1 libwant-perl
linux-libc-dev m4 po-debconf rpcsvc-proto
Suggested packages:
autoconf-archive gnu-standards autoconf-doc cpp-doc gcc-14-locales
cpp-14-doc dh-make gcc-14-doc gcc-multilib manpages-dev flex bison gdb
gcc-doc gdb-aarch64-linux-gnu libc-devtools glibc-doc libstdc++-14-doc
libtool-doc gfortran | fortran95-compiler gcj-jdk m4-doc libmail-box-perl
Recommended packages:
manpages manpages-dev libarchive-cpio-perl libmodule-signature-perl
libpod-readme-perl libsoftware-license-perl libltdl-dev
libmail-sendmail-perl
The following NEW packages will be installed:
autoconf automake autopoint autotools-dev build-essential cpp cpp-14
cpp-14-aarch64-linux-gnu cpp-aarch64-linux-gnu debhelper dh-autoreconf
dh-strip-nondeterminism dwz fakeroot g++ g++-14 g++-14-aarch64-linux-gnu
g++-aarch64-linux-gnu gcc gcc-14 gcc-14-aarch64-linux-gnu
gcc-aarch64-linux-gnu libasan8 libc-dev-bin libc6-dev libcc1-0 libcrypt-dev
libdebhelper-perl libelf1t64 libfakeroot libfile-stripnondeterminism-perl
libgcc-14-dev libhwasan0 libisl23 libitm1 liblsan0 libmodule-build-perl
libmpc3 libmpfr6 libstdc++-14-dev libtool libtsan2 libubsan1 libwant-perl
linux-libc-dev m4 po-debconf rpcsvc-proto sbuild-build-depends-main-dummy
0 upgraded, 49 newly installed, 0 to remove and 0 not upgraded.
Need to get 61.2 MB of archives.
After this operation, 238 MB of additional disk space will be used.
Get:1 copy:/<<RESOLVERDIR>>/apt_archive ./ sbuild-build-depends-main-dummy 0.invalid.0 [916 B]
Get:2 http://deb.debian.org/debian sid/main arm64 m4 arm64 1.4.19-4 [277 kB]
Get:3 http://deb.debian.org/debian sid/main arm64 autoconf all 2.72-3 [493 kB]
Get:4 http://deb.debian.org/debian sid/main arm64 autotools-dev all 20220109.1 [51.6 kB]
Get:5 http://deb.debian.org/debian sid/main arm64 automake all 1:1.16.5-1.3 [823 kB]
Get:6 http://deb.debian.org/debian sid/main arm64 autopoint all 0.22.5-2 [723 kB]
Get:7 http://deb.debian.org/debian sid/main arm64 libc-dev-bin arm64 2.40-3 [50.9 kB]
Get:8 http://deb.debian.org/debian sid/main arm64 linux-libc-dev all 6.11.7-1 [2454 kB]
Get:9 http://deb.debian.org/debian sid/main arm64 libcrypt-dev arm64 1:4.4.36-5 [122 kB]
Get:10 http://deb.debian.org/debian sid/main arm64 rpcsvc-proto arm64 1.4.3-1+b1 [60.5 kB]
Get:11 http://deb.debian.org/debian sid/main arm64 libc6-dev arm64 2.40-3 [1591 kB]
Get:12 http://deb.debian.org/debian sid/main arm64 libisl23 arm64 0.27-1 [601 kB]
Get:13 http://deb.debian.org/debian sid/main arm64 libmpfr6 arm64 4.2.1-1+b2 [680 kB]
Get:14 http://deb.debian.org/debian sid/main arm64 libmpc3 arm64 1.3.1-1+b3 [50.5 kB]
Get:15 http://deb.debian.org/debian sid/main arm64 cpp-14-aarch64-linux-gnu arm64 14.2.0-8 [9166 kB]
Get:16 http://deb.debian.org/debian sid/main arm64 cpp-14 arm64 14.2.0-8 [1284 B]
Get:17 http://deb.debian.org/debian sid/main arm64 cpp-aarch64-linux-gnu arm64 4:14.2.0-1 [4832 B]
Get:18 http://deb.debian.org/debian sid/main arm64 cpp arm64 4:14.2.0-1 [1568 B]
Get:19 http://deb.debian.org/debian sid/main arm64 libcc1-0 arm64 14.2.0-8 [42.2 kB]
Get:20 http://deb.debian.org/debian sid/main arm64 libitm1 arm64 14.2.0-8 [24.2 kB]
Get:21 http://deb.debian.org/debian sid/main arm64 libasan8 arm64 14.2.0-8 [2579 kB]
Get:22 http://deb.debian.org/debian sid/main arm64 liblsan0 arm64 14.2.0-8 [1161 kB]
Get:23 http://deb.debian.org/debian sid/main arm64 libtsan2 arm64 14.2.0-8 [2386 kB]
Get:24 http://deb.debian.org/debian sid/main arm64 libubsan1 arm64 14.2.0-8 [1039 kB]
Get:25 http://deb.debian.org/debian sid/main arm64 libhwasan0 arm64 14.2.0-8 [1442 kB]
Get:26 http://deb.debian.org/debian sid/main arm64 libgcc-14-dev arm64 14.2.0-8 [2365 kB]
Get:27 http://deb.debian.org/debian sid/main arm64 gcc-14-aarch64-linux-gnu arm64 14.2.0-8 [17.7 MB]
Get:28 http://deb.debian.org/debian sid/main arm64 gcc-14 arm64 14.2.0-8 [519 kB]
Get:29 http://deb.debian.org/debian sid/main arm64 gcc-aarch64-linux-gnu arm64 4:14.2.0-1 [1440 B]
Get:30 http://deb.debian.org/debian sid/main arm64 gcc arm64 4:14.2.0-1 [5136 B]
Get:31 http://deb.debian.org/debian sid/main arm64 libstdc++-14-dev arm64 14.2.0-8 [2267 kB]
Get:32 http://deb.debian.org/debian sid/main arm64 g++-14-aarch64-linux-gnu arm64 14.2.0-8 [10.1 MB]
Get:33 http://deb.debian.org/debian sid/main arm64 g++-14 arm64 14.2.0-8 [20.2 kB]
Get:34 http://deb.debian.org/debian sid/main arm64 g++-aarch64-linux-gnu arm64 4:14.2.0-1 [1200 B]
Get:35 http://deb.debian.org/debian sid/main arm64 g++ arm64 4:14.2.0-1 [1332 B]
Get:36 http://deb.debian.org/debian sid/main arm64 build-essential arm64 12.12 [4624 B]
Get:37 http://deb.debian.org/debian sid/main arm64 libdebhelper-perl all 13.20 [89.7 kB]
Get:38 http://deb.debian.org/debian sid/main arm64 libtool all 2.4.7-8 [517 kB]
Get:39 http://deb.debian.org/debian sid/main arm64 dh-autoreconf all 20 [17.1 kB]
Get:40 http://deb.debian.org/debian sid/main arm64 libfile-stripnondeterminism-perl all 1.14.0-1 [19.5 kB]
Get:41 http://deb.debian.org/debian sid/main arm64 dh-strip-nondeterminism all 1.14.0-1 [8448 B]
Get:42 http://deb.debian.org/debian sid/main arm64 libelf1t64 arm64 0.192-4 [189 kB]
Get:43 http://deb.debian.org/debian sid/main arm64 dwz arm64 0.15-1+b1 [102 kB]
Get:44 http://deb.debian.org/debian sid/main arm64 po-debconf all 1.0.21+nmu1 [248 kB]
Get:45 http://deb.debian.org/debian sid/main arm64 debhelper all 13.20 [915 kB]
Get:46 http://deb.debian.org/debian sid/main arm64 libfakeroot arm64 1.36-1 [29.1 kB]
Get:47 http://deb.debian.org/debian sid/main arm64 fakeroot arm64 1.36-1 [74.4 kB]
Get:48 http://deb.debian.org/debian sid/main arm64 libmodule-build-perl all 0.423400-2 [252 kB]
Get:49 http://deb.debian.org/debian sid/main arm64 libwant-perl arm64 0.29-2+b4 [27.3 kB]
debconf: delaying package configuration, since apt-utils is not installed
Fetched 61.2 MB in 1s (105 MB/s)
Selecting previously unselected package m4.
(Reading database ... 17119 files and directories currently installed.)
Preparing to unpack .../00-m4_1.4.19-4_arm64.deb ...
Unpacking m4 (1.4.19-4) ...
Selecting previously unselected package autoconf.
Preparing to unpack .../01-autoconf_2.72-3_all.deb ...
Unpacking autoconf (2.72-3) ...
Selecting previously unselected package autotools-dev.
Preparing to unpack .../02-autotools-dev_20220109.1_all.deb ...
Unpacking autotools-dev (20220109.1) ...
Selecting previously unselected package automake.
Preparing to unpack .../03-automake_1%3a1.16.5-1.3_all.deb ...
Unpacking automake (1:1.16.5-1.3) ...
Selecting previously unselected package autopoint.
Preparing to unpack .../04-autopoint_0.22.5-2_all.deb ...
Unpacking autopoint (0.22.5-2) ...
Selecting previously unselected package libc-dev-bin.
Preparing to unpack .../05-libc-dev-bin_2.40-3_arm64.deb ...
Unpacking libc-dev-bin (2.40-3) ...
Selecting previously unselected package linux-libc-dev.
Preparing to unpack .../06-linux-libc-dev_6.11.7-1_all.deb ...
Unpacking linux-libc-dev (6.11.7-1) ...
Selecting previously unselected package libcrypt-dev:arm64.
Preparing to unpack .../07-libcrypt-dev_1%3a4.4.36-5_arm64.deb ...
Unpacking libcrypt-dev:arm64 (1:4.4.36-5) ...
Selecting previously unselected package rpcsvc-proto.
Preparing to unpack .../08-rpcsvc-proto_1.4.3-1+b1_arm64.deb ...
Unpacking rpcsvc-proto (1.4.3-1+b1) ...
Selecting previously unselected package libc6-dev:arm64.
Preparing to unpack .../09-libc6-dev_2.40-3_arm64.deb ...
Unpacking libc6-dev:arm64 (2.40-3) ...
Selecting previously unselected package libisl23:arm64.
Preparing to unpack .../10-libisl23_0.27-1_arm64.deb ...
Unpacking libisl23:arm64 (0.27-1) ...
Selecting previously unselected package libmpfr6:arm64.
Preparing to unpack .../11-libmpfr6_4.2.1-1+b2_arm64.deb ...
Unpacking libmpfr6:arm64 (4.2.1-1+b2) ...
Selecting previously unselected package libmpc3:arm64.
Preparing to unpack .../12-libmpc3_1.3.1-1+b3_arm64.deb ...
Unpacking libmpc3:arm64 (1.3.1-1+b3) ...
Selecting previously unselected package cpp-14-aarch64-linux-gnu.
Preparing to unpack .../13-cpp-14-aarch64-linux-gnu_14.2.0-8_arm64.deb ...
Unpacking cpp-14-aarch64-linux-gnu (14.2.0-8) ...
Selecting previously unselected package cpp-14.
Preparing to unpack .../14-cpp-14_14.2.0-8_arm64.deb ...
Unpacking cpp-14 (14.2.0-8) ...
Selecting previously unselected package cpp-aarch64-linux-gnu.
Preparing to unpack .../15-cpp-aarch64-linux-gnu_4%3a14.2.0-1_arm64.deb ...
Unpacking cpp-aarch64-linux-gnu (4:14.2.0-1) ...
Selecting previously unselected package cpp.
Preparing to unpack .../16-cpp_4%3a14.2.0-1_arm64.deb ...
Unpacking cpp (4:14.2.0-1) ...
Selecting previously unselected package libcc1-0:arm64.
Preparing to unpack .../17-libcc1-0_14.2.0-8_arm64.deb ...
Unpacking libcc1-0:arm64 (14.2.0-8) ...
Selecting previously unselected package libitm1:arm64.
Preparing to unpack .../18-libitm1_14.2.0-8_arm64.deb ...
Unpacking libitm1:arm64 (14.2.0-8) ...
Selecting previously unselected package libasan8:arm64.
Preparing to unpack .../19-libasan8_14.2.0-8_arm64.deb ...
Unpacking libasan8:arm64 (14.2.0-8) ...
Selecting previously unselected package liblsan0:arm64.
Preparing to unpack .../20-liblsan0_14.2.0-8_arm64.deb ...
Unpacking liblsan0:arm64 (14.2.0-8) ...
Selecting previously unselected package libtsan2:arm64.
Preparing to unpack .../21-libtsan2_14.2.0-8_arm64.deb ...
Unpacking libtsan2:arm64 (14.2.0-8) ...
Selecting previously unselected package libubsan1:arm64.
Preparing to unpack .../22-libubsan1_14.2.0-8_arm64.deb ...
Unpacking libubsan1:arm64 (14.2.0-8) ...
Selecting previously unselected package libhwasan0:arm64.
Preparing to unpack .../23-libhwasan0_14.2.0-8_arm64.deb ...
Unpacking libhwasan0:arm64 (14.2.0-8) ...
Selecting previously unselected package libgcc-14-dev:arm64.
Preparing to unpack .../24-libgcc-14-dev_14.2.0-8_arm64.deb ...
Unpacking libgcc-14-dev:arm64 (14.2.0-8) ...
Selecting previously unselected package gcc-14-aarch64-linux-gnu.
Preparing to unpack .../25-gcc-14-aarch64-linux-gnu_14.2.0-8_arm64.deb ...
Unpacking gcc-14-aarch64-linux-gnu (14.2.0-8) ...
Selecting previously unselected package gcc-14.
Preparing to unpack .../26-gcc-14_14.2.0-8_arm64.deb ...
Unpacking gcc-14 (14.2.0-8) ...
Selecting previously unselected package gcc-aarch64-linux-gnu.
Preparing to unpack .../27-gcc-aarch64-linux-gnu_4%3a14.2.0-1_arm64.deb ...
Unpacking gcc-aarch64-linux-gnu (4:14.2.0-1) ...
Selecting previously unselected package gcc.
Preparing to unpack .../28-gcc_4%3a14.2.0-1_arm64.deb ...
Unpacking gcc (4:14.2.0-1) ...
Selecting previously unselected package libstdc++-14-dev:arm64.
Preparing to unpack .../29-libstdc++-14-dev_14.2.0-8_arm64.deb ...
Unpacking libstdc++-14-dev:arm64 (14.2.0-8) ...
Selecting previously unselected package g++-14-aarch64-linux-gnu.
Preparing to unpack .../30-g++-14-aarch64-linux-gnu_14.2.0-8_arm64.deb ...
Unpacking g++-14-aarch64-linux-gnu (14.2.0-8) ...
Selecting previously unselected package g++-14.
Preparing to unpack .../31-g++-14_14.2.0-8_arm64.deb ...
Unpacking g++-14 (14.2.0-8) ...
Selecting previously unselected package g++-aarch64-linux-gnu.
Preparing to unpack .../32-g++-aarch64-linux-gnu_4%3a14.2.0-1_arm64.deb ...
Unpacking g++-aarch64-linux-gnu (4:14.2.0-1) ...
Selecting previously unselected package g++.
Preparing to unpack .../33-g++_4%3a14.2.0-1_arm64.deb ...
Unpacking g++ (4:14.2.0-1) ...
Selecting previously unselected package build-essential.
Preparing to unpack .../34-build-essential_12.12_arm64.deb ...
Unpacking build-essential (12.12) ...
Selecting previously unselected package libdebhelper-perl.
Preparing to unpack .../35-libdebhelper-perl_13.20_all.deb ...
Unpacking libdebhelper-perl (13.20) ...
Selecting previously unselected package libtool.
Preparing to unpack .../36-libtool_2.4.7-8_all.deb ...
Unpacking libtool (2.4.7-8) ...
Selecting previously unselected package dh-autoreconf.
Preparing to unpack .../37-dh-autoreconf_20_all.deb ...
Unpacking dh-autoreconf (20) ...
Selecting previously unselected package libfile-stripnondeterminism-perl.
Preparing to unpack .../38-libfile-stripnondeterminism-perl_1.14.0-1_all.deb ...
Unpacking libfile-stripnondeterminism-perl (1.14.0-1) ...
Selecting previously unselected package dh-strip-nondeterminism.
Preparing to unpack .../39-dh-strip-nondeterminism_1.14.0-1_all.deb ...
Unpacking dh-strip-nondeterminism (1.14.0-1) ...
Selecting previously unselected package libelf1t64:arm64.
Preparing to unpack .../40-libelf1t64_0.192-4_arm64.deb ...
Unpacking libelf1t64:arm64 (0.192-4) ...
Selecting previously unselected package dwz.
Preparing to unpack .../41-dwz_0.15-1+b1_arm64.deb ...
Unpacking dwz (0.15-1+b1) ...
Selecting previously unselected package po-debconf.
Preparing to unpack .../42-po-debconf_1.0.21+nmu1_all.deb ...
Unpacking po-debconf (1.0.21+nmu1) ...
Selecting previously unselected package debhelper.
Preparing to unpack .../43-debhelper_13.20_all.deb ...
Unpacking debhelper (13.20) ...
Selecting previously unselected package libfakeroot:arm64.
Preparing to unpack .../44-libfakeroot_1.36-1_arm64.deb ...
Unpacking libfakeroot:arm64 (1.36-1) ...
Selecting previously unselected package fakeroot.
Preparing to unpack .../45-fakeroot_1.36-1_arm64.deb ...
Unpacking fakeroot (1.36-1) ...
Selecting previously unselected package libmodule-build-perl.
Preparing to unpack .../46-libmodule-build-perl_0.423400-2_all.deb ...
Adding 'diversion of /usr/bin/config_data to /usr/bin/config_data.diverted by libmodule-build-perl'
Adding 'diversion of /usr/share/man/man1/config_data.1.gz to /usr/share/man/man1/config_data.diverted.1.gz by libmodule-build-perl'
Unpacking libmodule-build-perl (0.423400-2) ...
Selecting previously unselected package libwant-perl.
Preparing to unpack .../47-libwant-perl_0.29-2+b4_arm64.deb ...
Unpacking libwant-perl (0.29-2+b4) ...
Selecting previously unselected package sbuild-build-depends-main-dummy.
Preparing to unpack .../48-sbuild-build-depends-main-dummy_0.invalid.0_arm64.deb ...
Unpacking sbuild-build-depends-main-dummy (0.invalid.0) ...
Setting up libfile-stripnondeterminism-perl (1.14.0-1) ...
Setting up libwant-perl (0.29-2+b4) ...
Setting up po-debconf (1.0.21+nmu1) ...
Setting up libdebhelper-perl (13.20) ...
Setting up linux-libc-dev (6.11.7-1) ...
Setting up m4 (1.4.19-4) ...
Setting up libfakeroot:arm64 (1.36-1) ...
Setting up libelf1t64:arm64 (0.192-4) ...
Setting up libmodule-build-perl (0.423400-2) ...
Setting up fakeroot (1.36-1) ...
update-alternatives: using /usr/bin/fakeroot-sysv to provide /usr/bin/fakeroot (fakeroot) in auto mode
Setting up autotools-dev (20220109.1) ...
Setting up rpcsvc-proto (1.4.3-1+b1) ...
Setting up libmpfr6:arm64 (4.2.1-1+b2) ...
Setting up libmpc3:arm64 (1.3.1-1+b3) ...
Setting up autopoint (0.22.5-2) ...
Setting up autoconf (2.72-3) ...
Setting up libubsan1:arm64 (14.2.0-8) ...
Setting up dh-strip-nondeterminism (1.14.0-1) ...
Setting up dwz (0.15-1+b1) ...
Setting up libhwasan0:arm64 (14.2.0-8) ...
Setting up libcrypt-dev:arm64 (1:4.4.36-5) ...
Setting up libasan8:arm64 (14.2.0-8) ...
Setting up libtsan2:arm64 (14.2.0-8) ...
Setting up libisl23:arm64 (0.27-1) ...
Setting up libc-dev-bin (2.40-3) ...
Setting up libcc1-0:arm64 (14.2.0-8) ...
Setting up liblsan0:arm64 (14.2.0-8) ...
Setting up libitm1:arm64 (14.2.0-8) ...
Setting up automake (1:1.16.5-1.3) ...
update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode
Setting up cpp-14-aarch64-linux-gnu (14.2.0-8) ...
Setting up libc6-dev:arm64 (2.40-3) ...
Setting up libgcc-14-dev:arm64 (14.2.0-8) ...
Setting up libstdc++-14-dev:arm64 (14.2.0-8) ...
Setting up cpp-aarch64-linux-gnu (4:14.2.0-1) ...
Setting up cpp-14 (14.2.0-8) ...
Setting up cpp (4:14.2.0-1) ...
Setting up gcc-14-aarch64-linux-gnu (14.2.0-8) ...
Setting up gcc-aarch64-linux-gnu (4:14.2.0-1) ...
Setting up g++-14-aarch64-linux-gnu (14.2.0-8) ...
Setting up gcc-14 (14.2.0-8) ...
Setting up g++-aarch64-linux-gnu (4:14.2.0-1) ...
Setting up g++-14 (14.2.0-8) ...
Setting up libtool (2.4.7-8) ...
Setting up gcc (4:14.2.0-1) ...
Setting up dh-autoreconf (20) ...
Setting up g++ (4:14.2.0-1) ...
update-alternatives: using /usr/bin/g++ to provide /usr/bin/c++ (c++) in auto mode
Setting up build-essential (12.12) ...
Setting up debhelper (13.20) ...
Setting up sbuild-build-depends-main-dummy (0.invalid.0) ...
Processing triggers for man-db (2.13.0-1) ...
Processing triggers for libc-bin (2.40-3) ...
+------------------------------------------------------------------------------+
| Check architectures |
+------------------------------------------------------------------------------+
Arch check ok (arm64 included in all)
+------------------------------------------------------------------------------+
| Build environment |
+------------------------------------------------------------------------------+
Kernel: Linux 6.1.0-27-cloud-arm64 #1 SMP Debian 6.1.115-1 (2024-11-01) arm64 (aarch64)
Toolchain package versions: binutils_2.43.1-5 dpkg-dev_1.22.12~1.gbp82cafd g++-14_14.2.0-8 gcc-14_14.2.0-8 libc6-dev_2.40-3 libstdc++-14-dev_14.2.0-8 libstdc++6_14.2.0-8 linux-libc-dev_6.11.7-1
Package versions: appstream_1.0.3-1+b1 apt_2.9.11 autoconf_2.72-3 automake_1:1.16.5-1.3 autopoint_0.22.5-2 autotools-dev_20220109.1 base-files_13.5 base-passwd_3.6.5 bash_5.2.32-1+b2 binutils_2.43.1-5 binutils-aarch64-linux-gnu_2.43.1-5 binutils-common_2.43.1-5 bsdextrautils_2.40.2-11 bsdutils_1:2.40.2-11 build-essential_12.12 bzip2_1.0.8-6 ca-certificates_20240203 coreutils_9.5-1+b1 cpp_4:14.2.0-1 cpp-14_14.2.0-8 cpp-14-aarch64-linux-gnu_14.2.0-8 cpp-aarch64-linux-gnu_4:14.2.0-1 dash_0.5.12-9+b1 debconf_1.5.87 debhelper_13.20 debian-archive-keyring_2023.4 debianutils_5.21 dh-autoreconf_20 dh-strip-nondeterminism_1.14.0-1 diffstat_1.66-1+b1 diffutils_1:3.10-1+b1 dpkg_1.22.12~1.gbp82cafd dpkg-dev_1.22.12~1.gbp82cafd dwz_0.15-1+b1 e2fsprogs_1.47.1-1+b1 fakeroot_1.36-1 file_1:5.45-3+b1 findutils_4.10.0-3 g++_4:14.2.0-1 g++-14_14.2.0-8 g++-14-aarch64-linux-gnu_14.2.0-8 g++-aarch64-linux-gnu_4:14.2.0-1 gcc_4:14.2.0-1 gcc-14_14.2.0-8 gcc-14-aarch64-linux-gnu_14.2.0-8 gcc-14-base_14.2.0-8 gcc-aarch64-linux-gnu_4:14.2.0-1 gettext_0.22.5-2 gettext-base_0.22.5-2 gpg_2.2.45-2 gpgconf_2.2.45-2 gpgv_2.2.45-2 grep_3.11-4+b1 groff-base_1.23.0-5 gzip_1.12-1.1+b1 hostname_3.25 init-system-helpers_1.67 intltool-debian_0.35.0+20060710.6 iso-codes_4.17.0-1 libacl1_2.3.2-2+b1 libaliased-perl_0.34-3 libappstream5_1.0.3-1+b1 libapt-pkg-perl_0.1.40+b6 libapt-pkg6.0t64_2.9.11 libarchive-zip-perl_1.68-1 libasan8_14.2.0-8 libassuan9_3.0.1-2 libatomic1_14.2.0-8 libattr1_1:2.5.2-2 libaudit-common_1:4.0.2-2 libaudit1_1:4.0.2-2 libb-hooks-endofscope-perl_0.28-1 libb-hooks-op-check-perl_0.22-3+b2 libberkeleydb-perl_0.66-1 libbinutils_2.43.1-5 libblkid1_2.40.2-11 libbrotli1_1.1.0-2+b6 libbsd0_0.12.2-2 libbz2-1.0_1.0.8-6 libc-bin_2.40-3 libc-dev-bin_2.40-3 libc6_2.40-3 libc6-dev_2.40-3 libcap-ng0_0.8.5-3+b1 libcap2_1:2.66-5+b1 libcapture-tiny-perl_0.48-2 libcc1-0_14.2.0-8 libcgi-pm-perl_4.66-1 libclass-data-inheritable-perl_0.10-1 libclass-inspector-perl_1.36-3 libclass-method-modifiers-perl_2.15-1 libclass-xsaccessor-perl_1.19-4+b4 libclone-perl_0.47-1+b1 libcom-err2_1.47.1-1+b1 libconfig-tiny-perl_2.30-1 libconst-fast-perl_0.014-2 libcpanel-json-xs-perl_4.38-1+b1 libcrypt-dev_1:4.4.36-5 libcrypt1_1:4.4.36-5 libctf-nobfd0_2.43.1-5 libctf0_2.43.1-5 libcurl3t64-gnutls_8.11.0-1 libdata-dpath-perl_0.60-1 libdata-messagepack-perl_1.02-1+b4 libdata-optlist-perl_0.114-1 libdata-validate-domain-perl_0.15-1 libdata-validate-ip-perl_0.31-1 libdata-validate-uri-perl_0.07-3 libdb5.3t64_5.3.28+dfsg2-9 libdebconfclient0_0.273 libdebhelper-perl_13.20 libdevel-callchecker-perl_0.009-1+b1 libdevel-size-perl_0.84-1+b1 libdevel-stacktrace-perl_2.0500-1 libdpkg-perl_1.22.12~1.gbp82cafd libdynaloader-functions-perl_0.004-1 libelf1t64_0.192-4 libemail-address-xs-perl_1.05-1+b4 libencode-locale-perl_1.05-3 libexception-class-perl_1.45-1 libext2fs2t64_1.47.1-1+b1 libfakeroot_1.36-1 libffi8_3.4.6-1 libfile-basedir-perl_0.09-2 libfile-find-rule-perl_0.34-3 libfile-listing-perl_6.16-1 libfile-sharedir-perl_1.118-3 libfile-stripnondeterminism-perl_1.14.0-1 libfont-ttf-perl_1.06-2 libgcc-14-dev_14.2.0-8 libgcc-s1_14.2.0-8 libgcrypt20_1.11.0-6 libgdbm-compat4t64_1.24-2 libgdbm6t64_1.24-2 libglib2.0-0t64_2.82.2-3 libgmp10_2:6.3.0+dfsg-2+b2 libgnutls30t64_3.8.8-2 libgomp1_14.2.0-8 libgpg-error0_1.50-4 libgprofng0_2.43.1-5 libgssapi-krb5-2_1.21.3-3 libhogweed6t64_3.10-1+b1 libhtml-form-perl_6.12-1 libhtml-html5-entities-perl_0.004-3 libhtml-parser-perl_3.83-1+b1 libhtml-tagset-perl_3.24-1 libhtml-tokeparser-simple-perl_3.16-4 libhtml-tree-perl_5.07-3 libhttp-cookies-perl_6.11-1 libhttp-date-perl_6.06-1 libhttp-message-perl_7.00-2 libhttp-negotiate-perl_6.01-2 libhwasan0_14.2.0-8 libicu72_72.1-5+b1 libidn2-0_2.3.7-2+b1 libimport-into-perl_1.002005-2 libio-html-perl_1.004-3 libio-interactive-perl_1.025-1 libio-socket-ssl-perl_2.089-1 libio-string-perl_1.08-4 libipc-run3-perl_0.049-1 libipc-system-simple-perl_1.30-2 libisl23_0.27-1 libiterator-perl_0.03+ds1-2 libiterator-util-perl_0.02+ds1-2 libitm1_14.2.0-8 libjansson4_2.14-2+b3 libjson-maybexs-perl_1.004008-1 libk5crypto3_1.21.3-3 libkeyutils1_1.6.3-4 libkrb5-3_1.21.3-3 libkrb5support0_1.21.3-3 libldap-2.5-0_2.5.18+dfsg-3+b1 liblist-compare-perl_0.55-2 liblist-someutils-perl_0.59-1 liblist-utilsby-perl_0.12-2 liblsan0_14.2.0-8 liblwp-mediatypes-perl_6.04-2 liblwp-protocol-https-perl_6.14-1 liblz1_1.15~pre2-1 liblz4-1_1.9.4-3+b1 liblzma5_5.6.3-1+b1 liblzo2-2_2.10-3+b1 libmagic-mgc_1:5.45-3+b1 libmagic1t64_1:5.45-3+b1 libmarkdown2_2.2.7-2.1 libmd0_1.1.0-2+b1 libmldbm-perl_2.05-4 libmodule-build-perl_0.423400-2 libmodule-implementation-perl_0.09-2 libmodule-runtime-perl_0.016-2 libmoo-perl_2.005005-1 libmoox-aliases-perl_0.001006-2 libmount1_2.40.2-11 libmouse-perl_2.5.11-1+b1 libmpc3_1.3.1-1+b3 libmpfr6_4.2.1-1+b2 libnamespace-clean-perl_0.27-2 libnet-domain-tld-perl_1.75-4 libnet-http-perl_6.23-1 libnet-ipv6addr-perl_1.02-1 libnet-netmask-perl_2.0002-2 libnet-ssleay-perl_1.94-2 libnetaddr-ip-perl_4.079+dfsg-2+b4 libnettle8t64_3.10-1+b1 libnghttp2-14_1.64.0-1 libnghttp3-9_1.4.0-1+b1 libngtcp2-16_1.6.0-1 libngtcp2-crypto-gnutls8_1.6.0-1 libnumber-compare-perl_0.03-3 libp11-kit0_0.25.5-2+b1 libpackage-stash-perl_0.40-1 libpam-modules_1.5.3-7+b1 libpam-modules-bin_1.5.3-7+b1 libpam-runtime_1.5.3-7 libpam0g_1.5.3-7+b1 libparams-classify-perl_0.015-2+b4 libparams-util-perl_1.102-3+b1 libpath-tiny-perl_0.146-1 libpcre2-8-0_10.44-4 libperl5.40_5.40.0-7 libperlio-gzip-perl_0.20-1+b4 libperlio-utf8-strict-perl_0.010-1+b3 libpipeline1_1.5.8-1 libproc-processtable-perl_0.636-1+b3 libpsl5t64_0.21.2-1.1+b1 libreadline8t64_8.2-5 libregexp-wildcards-perl_1.05-3 librole-tiny-perl_2.002004-1 librtmp1_2.4+20151223.gitfa8646d.1-2+b5 libsasl2-2_2.1.28+dfsg1-8 libsasl2-modules-db_2.1.28+dfsg1-8 libseccomp2_2.5.5-1+b3 libselinux1_3.7-3+b1 libsemanage-common_3.7-2 libsemanage2_3.7-2+b1 libsepol2_3.7-1 libsereal-decoder-perl_5.004+ds-1+b3 libsereal-encoder-perl_5.004+ds-1+b3 libsframe1_2.43.1-5 libsmartcols1_2.40.2-11 libsort-versions-perl_1.62-3 libsqlite3-0_3.46.1-1 libss2_1.47.1-1+b1 libssh2-1t64_1.11.1-1 libssl3t64_3.3.2-2 libstdc++-14-dev_14.2.0-8 libstdc++6_14.2.0-8 libstemmer0d_2.2.0-4+b2 libstrictures-perl_2.000006-1 libsub-exporter-perl_0.990-1 libsub-exporter-progressive-perl_0.001013-3 libsub-identify-perl_0.14-3+b3 libsub-install-perl_0.929-1 libsub-name-perl_0.27-1+b3 libsub-quote-perl_2.006008-1 libsyntax-keyword-try-perl_0.30-1+b1 libsystemd0_257~rc2-3 libtasn1-6_4.19.0-3+b3 libterm-readkey-perl_2.38-2+b4 libtext-glob-perl_0.11-3 libtext-levenshteinxs-perl_0.03-5+b4 libtext-markdown-discount-perl_0.16-1+b3 libtext-xslate-perl_3.5.9-2+b1 libtime-duration-perl_1.21-2 libtime-moment-perl_0.44-2+b4 libtimedate-perl_2.3300-2 libtinfo6_6.5-2+b1 libtool_2.4.7-8 libtry-tiny-perl_0.32-1 libtsan2_14.2.0-8 libubsan1_14.2.0-8 libuchardet0_0.0.8-1+b2 libudev1_257~rc2-3 libunicode-utf8-perl_0.62-2+b3 libunistring5_1.2-1+b1 liburi-perl_5.30-1 libuuid1_2.40.2-11 libvariable-magic-perl_0.64-1+b1 libwant-perl_0.29-2+b4 libwww-mechanize-perl_2.19-1 libwww-perl_6.77-1 libwww-robotrules-perl_6.02-1 libxml-libxml-perl_2.0207+dfsg+really+2.0134-5+b1 libxml-namespacesupport-perl_1.12-2 libxml-sax-base-perl_1.09-3 libxml-sax-perl_1.02+dfsg-3 libxml2_2.12.7+dfsg+really2.9.14-0.2+b1 libxmlb2_0.3.21-1 libxs-parse-keyword-perl_0.46-1+b1 libxxhash0_0.8.2-2+b2 libyaml-0-2_0.2.5-1+b2 libyaml-libyaml-perl_0.902.0+ds-2+b1 libzstd1_1.5.6+dfsg-1+b1 lintian_2.120.0 linux-libc-dev_6.11.7-1 login_1:4.16.0-2+really2.40.2-11 login.defs_1:4.16.0-5 logsave_1.47.1-1+b1 lzop_1.04-2+b1 m4_1.4.19-4 make_4.3-4.1+b1 man-db_2.13.0-1 mawk_1.3.4.20240905-1 mount_2.40.2-11 ncurses-base_6.5-2 ncurses-bin_6.5-2+b1 netbase_6.4 openssl_3.3.2-2 openssl-provider-legacy_3.3.2-2 passwd_1:4.16.0-5 patch_2.7.6-7+b1 patchutils_0.4.2-1+b1 perl_5.40.0-7 perl-base_5.40.0-7 perl-modules-5.40_5.40.0-7 perl-openssl-defaults_7+b2 plzip_1.11-2 po-debconf_1.0.21+nmu1 readline-common_8.2-5 rpcsvc-proto_1.4.3-1+b1 sbuild-build-depends-main-dummy_0.invalid.0 sed_4.9-2+b1 sensible-utils_0.0.24 shared-mime-info_2.4-5+b1 sysvinit-utils_3.11-1 t1utils_1.41-4+b1 tar_1.35+dfsg-3+b1 tzdata_2024b-3 ucf_3.0043+nmu1 unzip_6.0-28+b1 util-linux_2.40.2-11 xz-utils_5.6.3-1+b1 zlib1g_1:1.3.dfsg+really1.3.1-1+b1
+------------------------------------------------------------------------------+
| Build |
+------------------------------------------------------------------------------+
Unpack source
-------------
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA512
Format: 3.0 (quilt)
Source: libobject-insideout-perl
Binary: libobject-insideout-perl
Architecture: all
Version: 4.05-2
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Uploaders: gregor herrmann <gregoa@debian.org>, Salvatore Bonaccorso <carnil@debian.org>
Homepage: https://metacpan.org/release/Object-InsideOut
Standards-Version: 4.2.1
Vcs-Browser: https://salsa.debian.org/perl-team/modules/packages/libobject-insideout-perl
Vcs-Git: https://salsa.debian.org/perl-team/modules/packages/libobject-insideout-perl.git
Testsuite: autopkgtest-pkg-perl
Build-Depends: debhelper-compat (= 13), libmodule-build-perl
Build-Depends-Indep: libexception-class-perl, libwant-perl, perl
Package-List:
libobject-insideout-perl deb perl optional arch=all
Checksums-Sha1:
5f4f004a6bcde2cf59fb21d6ba9b8dc265ff6b2a 132319 libobject-insideout-perl_4.05.orig.tar.gz
5adb8750f551497e84dbadae6e7ea70a3a7a4203 3268 libobject-insideout-perl_4.05-2.debian.tar.xz
Checksums-Sha256:
9dfd6ca2822724347e0eb6759d00709425814703ad5c66bdb6214579868bcac4 132319 libobject-insideout-perl_4.05.orig.tar.gz
6f29dd93c94d6ab3a944820c9052ef838f058b0e7da2aad6ef314ce437a048db 3268 libobject-insideout-perl_4.05-2.debian.tar.xz
Files:
38edef7431609e67add48d3bdf70c076 132319 libobject-insideout-perl_4.05.orig.tar.gz
260a77e71949ca9371195b24def5d0ee 3268 libobject-insideout-perl_4.05-2.debian.tar.xz
-----BEGIN PGP SIGNATURE-----
iQIzBAEBCgAdFiEEsjhixBXWVlpOhsvXV5wWDUyeI+gFAmOGissACgkQV5wWDUye
I+h5axAArubMev+Q5xT2JrUEVsxtRL68A9mUzY51g0uKomJ3+qBIYnaiW0Pg018T
BtTiH+TB9YQWDh/ywSpwm0oTwf4eBMfX7Ly8P3eJF0QSkdbD+XhTR7uacHKGqTOt
VRYBeYuDFiUTRy/K4vzCKEHf0AL7i7pUDC5X/V0Hxd2tbJPbcECwv/pyyztNS/wR
M32B10oCCZS0GQv/ocBesQ47Ys1XpA5zQ3BAFl8XNqizdfHJpT5lEG86d5cIjalh
4IGY1ElU1RL/pBj4NOVDHyvsr+bPushOcStz1Rh+lm9YvEpF3AJD1ZJozkYyXFpI
LePHN+BMLZIdb759ODXW9l4K4AlDszeAhh5MKvDG0PqaGkTzbSadhqdl8Z/Ru3WF
eGW/LWOKDUSdLqUufoLRCSbbz2x99zuiRWHO3QYL1f0GhtWRH0py1EKzdqkUOtRu
QfHq3VkmAAG0mUPXEslv6/n5oDVnVkqQTfdhowjqTAmxIwVqVlcL0FDs9fYe7eBc
588r4Tc3kxE8W/T/ILEtVqHMRD3y2vl28Ok4jivKrkR1zVBmTVC26J36n6ns5ke0
5Acq3YNoQKbfk269qKvcemVCO7J5zEfH4d9iIZYfqU8+Y+SPk0Rj9VF60Oh/rQvC
EcXDu+P7fYGst47vHhSvXht+0eDYBztcAdQZfeXFleskLJPN7Xk=
=xNUx
-----END PGP SIGNATURE-----
gpgv: Signature made Tue Nov 29 22:42:19 2022 UTC
gpgv: using RSA key B23862C415D6565A4E86CBD7579C160D4C9E23E8
gpgv: Can't check signature: No public key
dpkg-source: warning: cannot verify inline signature for ./libobject-insideout-perl_4.05-2.dsc: no acceptable signature found
dpkg-source: info: extracting libobject-insideout-perl in /<<PKGBUILDDIR>>
dpkg-source: info: unpacking libobject-insideout-perl_4.05.orig.tar.gz
dpkg-source: info: unpacking libobject-insideout-perl_4.05-2.debian.tar.xz
Check disk space
----------------
Sufficient free space for build
User Environment
----------------
APT_CONFIG=/var/lib/sbuild/apt.conf
HOME=/sbuild-nonexistent
LANG=en_US.UTF-8
LC_ALL=C.UTF-8
LOGNAME=debusine-worker
PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games
SHELL=/bin/sh
USER=debusine-worker
dpkg-buildpackage
-----------------
Command: dpkg-buildpackage -us -uc -b -rfakeroot
dpkg-buildpackage: info: source package libobject-insideout-perl
dpkg-buildpackage: info: source version 4.05-2
dpkg-buildpackage: info: source distribution unstable
dpkg-buildpackage: info: source changed by Jelmer Vernooij <jelmer@debian.org>
dpkg-source --before-build .
dpkg-buildpackage: info: host architecture arm64
debian/rules clean
dh clean
dh_clean
debian/rules binary
dh binary
dh_update_autotools_config
dh_autoreconf
dh_auto_configure
/usr/bin/perl Build.PL --installdirs vendor --config "optimize=-g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wdate-time -D_FORTIFY_SOURCE=2" --config "ld=aarch64-linux-gnu-gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wl,-z,relro"
Checking prerequisites...
recommends:
* Math::Random::MT::Auto is not installed
* Test::Pod is not installed
* Test::Pod::Coverage is not installed
ERRORS/WARNINGS FOUND IN PREREQUISITES. You may wish to install the versions
of the modules indicated above before proceeding with this installation
Run 'Build installdeps' to install missing prerequisites.
Created MYMETA.yml and MYMETA.json
Creating new 'Build' script for 'Object-InsideOut' version '4.05'
dh_auto_build
/usr/bin/perl Build
Building Object-InsideOut
dh_auto_test
/usr/bin/perl Build test --verbose 1
# Testing Object::InsideOut 4.05
t/00-load.t .................
1..1
ok 1 - use Object::InsideOut;
ok
t/01-basic.t ................
1..39
ok 1 - Args passed to MyBase::init in hash-ref
ok 2 - MyBase priv arg unpacked correctly
ok 3 - MyBase snum arg unpacked correctly
ok 4 - MyBase->can(...)
ok 5 - MyBase::name initialized
ok 6 - MyBase::rank initialized
ok 7 - MyBase::snum initialized
ok 8 - MyBase::name initialized
ok 9 - MyBase::def initialized
ok 10 - MyBase combined accessor
ok 11 - Args passed to MyBase::init in hash-ref
ok 12 - MyBase priv arg unpacked correctly
ok 13 - MyBase snum arg unpacked correctly
ok 14 - Args passed to Der::init in hash-ref
ok 15 - Der->can(...)
ok 16 - MyBase::name initialized
ok 17 - MyBase::rank initialized
ok 18 - MyBase::snum initialized
ok 19 - MyBase::name initialized
ok 20 - MyBase::def initialized
ok 21 - Der::name initialized
ok 22 - Der::rank initialized
ok 23 - Der::snum initialized
ok 24 - Der::name initialized
ok 25 - Der::def initialized
ok 26 - Der name read accessor
ok 27 - Der rank read accessor
ok 28 - Der rank read accessor
ok 29 - Der priv read accessor
ok 30 - Der rank write accessor
ok 31 - Read only name attribute
ok 32 - Args passed to MyBase::init in hash-ref
ok 33 - MyBase priv arg unpacked correctly
ok 34 - MyBase snum arg unpacked correctly
ok 35 - Args passed to Der::init in hash-ref
ok 36 - undef values processes as initializers
ok 37 - False values allowable as initializers
ok 38 - False values allowable as initializers
ok 39 - Missing mandatory initializer caught
ok
t/01a-basic.t ...............
1..39
ok 1 - Args passed to MyBase::init in hash-ref
ok 2 - MyBase priv arg unpacked correctly
ok 3 - MyBase snum arg unpacked correctly
ok 4 - MyBase->can(...)
ok 5 - MyBase::name initialized
ok 6 - MyBase::rank initialized
ok 7 - MyBase::snum initialized
ok 8 - MyBase::name initialized
ok 9 - MyBase::def initialized
ok 10 - MyBase combined accessor
ok 11 - Args passed to MyBase::init in hash-ref
ok 12 - MyBase priv arg unpacked correctly
ok 13 - MyBase snum arg unpacked correctly
ok 14 - Args passed to Der::init in hash-ref
ok 15 - Der->can(...)
ok 16 - MyBase::name initialized
ok 17 - MyBase::rank initialized
ok 18 - MyBase::snum initialized
ok 19 - MyBase::name initialized
ok 20 - MyBase::def initialized
ok 21 - Der::name initialized
ok 22 - Der::rank initialized
ok 23 - Der::snum initialized
ok 24 - Der::name initialized
ok 25 - Der::def initialized
ok 26 - Der name read accessor
ok 27 - Der rank read accessor
ok 28 - Der rank read accessor
ok 29 - Der priv read accessor
ok 30 - Der rank write accessor
ok 31 - Read only name attribute
ok 32 - Args passed to MyBase::init in hash-ref
ok 33 - MyBase priv arg unpacked correctly
ok 34 - MyBase snum arg unpacked correctly
ok 35 - Args passed to Der::init in hash-ref
ok 36 - undef values processes as initializers
ok 37 - False values allowable as initializers
ok 38 - False values allowable as initializers
ok 39 - Missing mandatory initializer caught
ok
t/02-auto.t .................
1..37
ok 1 - My::Class->foo()
ok 2 - Direct My::Class->foo()
ok 3 - Indirect My::Class->foo()
ok 4 - My::Sub->foo()
ok 5 - Direct My::Sub->foo()
ok 6 - Indirect My::Sub->foo()
ok 7 - My::Sub->bar()
ok 8 - Direct My::Sub->bar()
ok 9 - Indirect My::Sub->bar()
ok 10 - My::Bar can foo()
ok 11 - Direct My::Bar->foo()
ok 12 - Indirect My::Bar->foo()
ok 13 - My::Bar can bar()
ok 14 - Direct My::Bar->bar()
ok 15 - Indirect My::Bar->bar()
ok 16 - My::Baz can foo()
ok 17 - Direct My::Baz->foo()
ok 18 - Indirect My::Baz->foo()
ok 19 - My::Baz can bar()
ok 20 - Direct My::Baz->bar()
ok 21 - Indirect My::Baz->bar()
ok 22 - My::MT no can foo()
ok 23 - No My::MT foo()
ok 24 - Class cumulative
ok 25 - Subclass cumulative
ok 26 - Class automethod
ok 27 - Sublass automethod
ok 28 - Class can+automethod
ok 29 - Sublass can+automethod
ok 30 - Inherited cumulative
ok 31 - Object automethod
ok 32 - Object automethod
ok 33 - class::SUPER::method
ok 34 - class::SUPER::method
ok 35 - SUPER::method
ok 36 - class::method
ok 37 - Defective :Automethod
ok
t/03-threads.t ..............
1..12
ok 1 - Class set data
ok 2 - Subclass set data
ok 3 - Subclass set data
ok 4 - Thread class data
ok 5 - Thread subclass data
ok 6 - Thread subclass data
ok 7 - Thread class data
ok 8 - Thread subclass data
ok 9 - Thread subclass data
ok 10 - Class data unchanged
ok 11 - Subclass data unchanged
ok 12 - Subclass data unchanged
ok
t/03a-threads.t .............
1..12
ok 1 - Class set data
ok 2 - Subclass set data
ok 3 - Subclass set data
ok 4 - Thread class data
ok 5 - Thread subclass data
ok 6 - Thread subclass data
ok 7 - Thread class data
ok 8 - Thread subclass data
ok 9 - Thread subclass data
ok 10 - Class data unchanged
ok 11 - Subclass data unchanged
ok 12 - Subclass data unchanged
ok
t/04-shared.t ...............
1..16
ok 1 - Obj data is TID in thread
ok 2 - Obj data is TID in thread
ok 3 - Obj data is TID in main
ok 4 - Obj data is TID in main
ok 5 - Class set data
ok 6 - Subclass set data
ok 7 - Subclass set data
ok 8 - Thread class data
ok 9 - Thread subclass data
ok 10 - Thread subclass data
ok 11 - Thread class data
ok 12 - Thread subclass data
ok 13 - Thread subclass data
ok 14 - Thread class data
ok 15 - Thread subclass data
ok 16 - Thread subclass data
ok
t/04a-shared.t ..............
1..16
ok 1 - Obj data is TID in thread
ok 2 - Obj data is TID in thread
ok 3 - Obj data is TID in main
ok 4 - Obj data is TID in main
ok 5 - Class set data
ok 6 - Subclass set data
ok 7 - Subclass set data
ok 8 - Thread class data
ok 9 - Thread subclass data
ok 10 - Thread subclass data
ok 11 - Thread class data
ok 12 - Thread subclass data
ok 13 - Thread subclass data
ok 14 - Thread class data
ok 15 - Thread subclass data
ok 16 - Thread subclass data
ok
t/05-require.t ..............
1..24
ok 1 - require
ok 2 - ->new()
ok 3 - t::AA->can(...)
ok 4 - Object ID: 1
ok 5 - No default
ok 6 - Set ->aa()
ok 7 - Get ->aa() == 42
ok 8 - t::BB->can(...)
ok 9 - ->new()
ok 10 - Object ID: 2
ok 11 - Default: def
ok 12 - Set ->set_bb()
ok 13 - Get ->bb() eq foo
ok 14 - ->new()
ok 15 - Object ID: 3
ok 16 - Init: baz
ok 17 - Set ->set_bb()
ok 18 - Get ->bb() eq foo
ok 19 - t::AB->can(...)
ok 20 - ->new()
ok 21 - Object ID: 4
ok 22 - Default: def
ok 23 - Set ->set_bb()
ok 24 - Get ->bb() eq foo
ok
t/05a-require.t .............
1..24
ok 1 - require
ok 2 - ->new()
ok 3 - t::AA->can(...)
ok 4 - Object ID: 1
ok 5 - No default
ok 6 - Set ->aa()
ok 7 - Get ->aa()
ok 8 - t::BB->can(...)
ok 9 - ->new()
ok 10 - Object ID: 2
ok 11 - Default: def
ok 12 - Set ->set_bb()
ok 13 - Get ->bb() eq foo
ok 14 - ->new()
ok 15 - Object ID: 1
ok 16 - Init: baz
ok 17 - Set ->set_bb()
ok 18 - Get ->bb() eq foo
ok 19 - t::AB->can(...)
ok 20 - ->new()
ok 21 - Object ID: 2
ok 22 - Default: def
ok 23 - Set ->set_bb()
ok 24 - Get ->bb() eq foo
ok
t/06-id.t ...................
1..36
ok 1 - ->new()
ok 2 - AA->can(...)
ok 3 - Object ID: 1
ok 4 - No default
ok 5 - Set ->aa()
ok 6 - Get ->aa() == 42
ok 7 - BB->can(...)
ok 8 - ->new()
ok 9 - Object ID: 2
ok 10 - Default: def
ok 11 - Set ->set_bb()
ok 12 - Get ->bb() eq foo
ok 13 - ->new()
ok 14 - Object ID: 3
ok 15 - Init: baz
ok 16 - Set ->set_bb()
ok 17 - Get ->bb() eq foo
ok 18 - AB->can(...)
ok 19 - ->new()
ok 20 - Object ID: 4
ok 21 - Default: def
ok 22 - Set ->set_bb()
ok 23 - Get ->bb() eq foo
ok 24 - Get ->bb() eq foo
ok 25 - ->info_get() eq
ok 26 - Set: ->info_get() eq test
ok 27 - ID reclaimed
ok 28 - ID reclaimed
ok 29 - ID reclaimed
ok 30 - ID reclaimed
ok 31 - ID reclaimed
ok 32 - ID reclaimed
ok 33 - ID reclaimed
ok 34 - ID reclaimed
ok 35 - ID reclaimed
ok 36 - ID reclaimed
ok
t/07-dump.t .................
1..15
ok 1 - Representation is valid
ok 2 - Representation is valid
ok 3 - Class
ok 4 - Public base attribute
ok 5 - Private base attribute
ok 6 - Public derived attribute
ok 7 - Private derived attribute
ok 8 - Hidden derived attribute
ok 9 - Hidden derived attribute
ok 10 - String dump
ok 11 - eval is valid
ok 12 - eval is valid
ok 13 - Dumps are equal
ok 14 - Unnamed field
ok 15 - Dump string contents verified
ok
t/07a-dump.t ................
1..12
ok 1 - Representation is valid
ok 2 - Representation is valid
ok 3 - Class
ok 4 - Public base attribute
ok 5 - Private base attribute
ok 6 - Public derived attribute
ok 7 - Private derived attribute
ok 8 - Hidden derived attribute
ok 9 - String dump
ok 10 - eval is valid
ok 11 - eval is valid
ok 12 - Dumps are equal
ok
t/08-access.t ...............
1..20
ok 1 - Called everyone
ok 2 - Called family
ok 3 - Called personal
ok 4 - Called everyone
ok 5 - Called family
ok 6 - Derived call failed
ok 7 - ...with correct error message
ok 8 - External everyone succeeded
ok 9 - External family failed as expected
ok 10 - ...with correct error message
ok 11 - External personal failed as expected
ok 12 - ...with correct error message
ok 13 - External derived everyone succeeded
ok 14 - External derived family failed as expected
ok 15 - ...with correct error message
ok 16 - External derived personal failed as expected
ok 17 - ...with correct error message
ok 18 - :Restricted
ok 19 - :Restricted exception
ok 20 - :Private exception
ok
t/09-chained.t ..............
1..2
ok 1 - List chained down
ok 2 - List chained up
ok
t/09a-chained.t .............
1..1
ok 1 - Chained methods with merged args
ok
t/09b-chained.t .............
1..3
ok 1 - :Restricted + :Chained
ok 2 - Chained methods with merged args
ok 3 - Chained methods with merged args
ok
t/10-cumulative.t ...........
1..62
ok 1 - List chained down
ok 2 - List chained up
ok 3 - Numeric chained up
ok 4 - Numeric chained down
ok 5 - String chained up
ok 6 - String chained down
ok 7 - Valid up hash key (Der1)
ok 8 - Valid up hash value (Der1)
ok 9 - Valid up hash key (Base1)
ok 10 - Valid up hash value (Base1)
ok 11 - Valid up hash key (Base3)
ok 12 - Valid up hash value (Base3)
ok 13 - Valid up hash key (Der2)
ok 14 - Valid up hash value (Der2)
ok 15 - Valid up hash key (Reder1)
ok 16 - Valid up hash value (Reder1)
ok 17 - Valid up hash key (Base2)
ok 18 - Valid up hash value (Base2)
ok 19 - Valid down hash key (Reder1)
ok 20 - Valid down hash value (Reder1)
ok 21 - Valid down hash key (Der2)
ok 22 - Valid down hash value (Der2)
ok 23 - Valid down hash key (Base2)
ok 24 - Valid down hash value (Base2)
ok 25 - Valid down hash key (Base3)
ok 26 - Valid down hash value (Base3)
ok 27 - Valid down hash key (Base1)
ok 28 - Valid down hash value (Base1)
ok 29 - Valid down hash key (Der1)
ok 30 - Valid down hash value (Der1)
ok 31 - shift(@_) used in method
ok 32 - List chained down
ok 33 - List chained up
ok 34 - Numeric chained up
ok 35 - Numeric chained down
ok 36 - String chained up
ok 37 - String chained down
ok 38 - Valid up hash key (Der2)
ok 39 - Valid up hash value (Der2)
ok 40 - Valid up hash key (Reder1)
ok 41 - Valid up hash value (Reder1)
ok 42 - Valid up hash key (Base2)
ok 43 - Valid up hash value (Base2)
ok 44 - Valid up hash key (Base1)
ok 45 - Valid up hash value (Base1)
ok 46 - Valid up hash key (Der1)
ok 47 - Valid up hash value (Der1)
ok 48 - Valid up hash key (Base3)
ok 49 - Valid up hash value (Base3)
ok 50 - Valid down hash key (Base3)
ok 51 - Valid down hash value (Base3)
ok 52 - Valid down hash key (Base2)
ok 53 - Valid down hash value (Base2)
ok 54 - Valid down hash key (Der1)
ok 55 - Valid down hash value (Der1)
ok 56 - Valid down hash key (Base1)
ok 57 - Valid down hash value (Base1)
ok 58 - Valid down hash key (Reder1)
ok 59 - Valid down hash value (Reder1)
ok 60 - Valid down hash key (Der2)
ok 61 - Valid down hash value (Der2)
ok 62 - shift(@_) used in method
ok
t/10a-cumulative.t ..........
1..1
ok 1 - Cumulative methods with merged args
ok
t/10b-cumulative.t ..........
1..3
ok 1 - :Restricted + :Cumulative
ok 2 - Cumulative methods with merged args
ok 3 - Cumulative methods with merged args
ok
t/11-coercion.t .............
1..35
ok 1 - Base Boolean coercion
ok 2 - Base Numeric coercion
ok 3 - Base String coercion
ok 4 - Base Code coercion
ok 5 - Base Glob coercion
ok 6 - Base Hash coercion
ok 7 - Base Array coercion
ok 8 - Der Boolean coercion
ok 9 - Der Numeric coercion
ok 10 - Der String coercion
ok 11 - Der Code coercion
ok 12 - Der Glob coercion
ok 13 - Der Hash coercion
ok 14 - Der Array coercion
ok 15 - Der2 Boolean coercion
ok 16 - Der2 Numeric coercion
ok 17 - Der2 String coercion
ok 18 - Der2 Code coercion
ok 19 - Der2 Glob coercion
ok 20 - Der2 Hash coercion
ok 21 - Der2 Array coercion
ok 22 - Der3 Boolean coercion
ok 23 - Der3 Numeric coercion
ok 24 - Der3 String coercion
ok 25 - Der3 Code coercion
ok 26 - Der3 Glob coercion
ok 27 - Der3 Hash coercion
ok 28 - Der3 Array coercion
ok 29 - Der4 Boolean coercion
ok 30 - Der4 Numeric coercion
ok 31 - Der4 String coercion
ok 32 - Der4 Code coercion
ok 33 - Der4 Glob coercion
ok 34 - Der4 Hash coercion
ok 35 - Der4 Array coercion
ok
t/12-super.t ................
1..22
ok 1 - ->can('method')
ok 2 - ->can('method')
ok 3 - ->can('method')
ok 4 - ->can('method')
ok 5 - No can do
ok 6 - ->can('class::method')
ok 7 - ->can('class::method')
ok 8 - ->can('class::SUPER::method')
ok 9 - ->can('class::SUPER::method')
ok 10 - ->can('class::SUPER::method')
ok 11 - ->can('SUPER::method')
ok 12 - ->can('SUPER::method')
ok 13 - ->can('method')
ok 14 - ->can('method')
ok 15 - ->can('method')
ok 16 - No can do
ok 17 - ->can('class::method')
ok 18 - ->can('class::method')
ok 19 - ->can('class::SUPER::method')
ok 20 - ->can('class::SUPER::method')
ok 21 - ->can('SUPER::method')
ok 22 - ->can('SUPER::method')
ok
t/13-pump.t .................
1..19
ok 1 - Representation is valid
ok 2 - Representation is valid
ok 3 - Class
ok 4 - Public base attribute
ok 5 - Private base attribute
ok 6 - Public derived attribute
ok 7 - Private derived attribute
ok 8 - Hidden derived attribute
ok 9 - Dumper gave value
ok 10 - String dump
ok 11 - eval is valid
ok 12 - eval is valid
ok 13 - Dumps are equal
ok 14 - Pumper got data
ok 15 - Pump in hash
ok 16 - Redump equals dump
ok 17 - Pumper got data
ok 18 - Pump in string
ok 19 - Redump equals dump
ok
t/14-auto_cc.t ..............
1..6
ok 1 - Accumulation 1
ok 2 - Accumulation 2
ok 3 - Accumulation 3
ok 4 - Chained 1
ok 5 - Chained 2
ok 6 - Chained 3
ok
t/15-type.t .................
1..34
ok 1 - Array single value
ok 2 - Array multiple values
ok 3 - Array ref value
ok 4 - Array single class
ok 5 - Array multiple class
ok 6 - Array ref class
ok 7 - Not array ref
ok 8 - Array ref
ok 9 - Type sub
ok 10 - Type failure
ok 11 - Type sub failure
ok 12 - Hash single pair
ok 13 - Hash multiple pairs
ok 14 - Hash ref value
ok 15 - Not hash ref
ok 16 - Hash ref
ok 17 - 'Object' isa 'My::Class'
ok 18 - Objects equal
ok 19 - Not object
ok 20 - Numeric
ok 21 - Numeric failure
ok 22 - Scalar
ok 23 - Scalar failure
ok 24 - Scalar
ok 25 - Scalar
ok 26 - Scalar failure
ok 27 - Not scalar ref
ok 28 - Scalar ref
ok 29 - Scalar ref value
ok 30 - Type failure
ok 31 - Type failure
ok 32 - Scalar failure
ok 33 - Type sub failure
ok 34 - isa works
ok
t/15a-type.t ................
1..32
ok 1 - Array single value
ok 2 - Array multiple values
ok 3 - Array ref value
ok 4 - Not array ref
ok 5 - Array ref
ok 6 - Type sub
ok 7 - Type failure
ok 8 - Type sub failure
ok 9 - Hash single pair
ok 10 - Hash multiple pairs
ok 11 - Hash ref value
ok 12 - Not hash ref
ok 13 - Hash ref
ok 14 - 'Object' isa 'My::Class'
ok 15 - Objects equal
ok 16 - Not object
ok 17 - Numeric
ok 18 - Numeric failure
ok 19 - Array single num
ok 20 - Array multiple num
ok 21 - Array ref num
ok 22 - Scalar
ok 23 - Scalar failure
ok 24 - Not scalar ref
ok 25 - Scalar ref
ok 26 - Scalar ref value
ok 27 - Type failure
ok 28 - Type failure
ok 29 - Type sub failure
ok 30 - InitArgs type arrayref(UNIV)
ok 31 - InitArgs type arrayref(numeric)
ok 32 - Set arrayref(numeric)
ok
t/16-return.t ...............
1..10
ok 1 - undef on old
ok 2 - Get okay
ok 3 - Old return value
ok 4 - Get okay
ok 5 - New return value
ok 6 - Get okay
ok 7 - Self return value
ok 8 - Get okay
ok 9 - Default return value
ok 10 - Get okay
ok
t/17-dynamic.t ..............
1..6
ok 1 - My::Sub->can(...)
ok 2 - Method works
ok 3 - My::Sub->can(...)
ok 4 - Not munged
ok 5 - My::Sub->can(...)
ok 6 - Dynamic foo
ok
t/18-inherit.t ..............
1..12
ok 1 - Borg->can(...)
ok 2 - Foo isa Borg
ok 3 - Foo->can(...)
ok 4 - Class method inheritance
ok 5 - isa Foo
ok 6 - isa Borg
ok 7 - Baz->can(...)
ok 8 - get from Borg
ok 9 - Changed Borg
ok 10 - isa Borg
ok 11 - Retrieved object
ok 12 - isa works
ok
t/18a-inherit.t .............
1..1
ok 1 - Created object with overloaded bool operation
ok
t/19-storable.t .............
1..8
ok 1 - 'Baz->new()' isa 'Baz'
ok 2 - Storable works
ok 3 - Stored object
ok 4 - Storable works
ok 5 - Circular reference
ok 6 - Storable works
ok 7 - Unnamed field
ok 8 - thaw failed
ok
t/20-clone.t ................
1..9
ok 1 - Clone equal
ok 2 - Deep field copy
ok 3 - Shared data
ok 4 - Shared data
ok 5 - Clone equal
ok 6 - Deep object clone
ok 7 - Deep object clone
ok 8 - Internal object
ok 9 - Deep internal object
ok
t/21-import.t ...............
1..7
ok 1 - @main::ISA result=
ok 2 - @t::A::ISA result=Object::InsideOut
ok 3 - @t::AA::ISA result=t::A
ok 4 - @t::AAA::ISA result=t::AA
ok 5 - @t::AA::ISA result=t::A
ok 6 - @t::A_also::ISA result=t::A
ok 7 - @t::AB::ISA result=t::A, t::B
ok
t/22-import.t ...............
1..10
ok 1 - Correctly fails on syntax error in parent
ok 2 - Correctly fails on missing parent
ok 3 - Correctly fails on missing parent
ok 4 - Correctly fails on empty parent
ok 5 - Correctly fails on empty parent
ok 6 - Correctly fails on empty parent
ok 7 - Correctly fails on empty parent
ok 8 - An object of class 't::Parent::Child' isa 't::Parent::Child'
ok 9 - An object of class 't::Parent::Child' isa 't::Parent'
ok 10 - child->parent_func()
ok
t/23-weak.t .................
1..10
ok 1 - Stored object
ok 2 - Object in clone
ok 3 - Object in pump
ok 4 - Object in initargs
ok 5 - Object in set
ok 6 - Data gone
ok 7 - Data gone in clone
ok 8 - Data gone in pump
ok 9 - Data gone in initargs
ok 10 - Data gone in set
ok
t/24-preproc.t ..............
1..6
ok 1 - Correct class
ok 2 - Correct class
ok 3 - Correct class
ok 4 - Preprocessing - default
ok 5 - Preprocessing - deleted
ok 6 - Preprocessing - overridden
ok
t/25-access.t ...............
1..9
ok 1 - Private set method
ok 2 - Private get method
ok 3 - Restricted method
ok 4 - Private get method
ok 5 - Restricted set
ok 6 - Restricted get
ok 7 - Restricted method
ok 8 - Exempt restricted set
ok 9 - Exempt restricted get
ok
t/26-preinit.t ..............
1..8
ok 1 - Object okay
ok 2 - Object data from main
ok 3 - Object okay
ok 4 - Object data from bar
ok 5 - Object okay
ok 6 - Object data from main
ok 7 - Object okay
ok 8 - Object data from bar
ok
t/27-exception.t ............
1..19
ok 1 - 'Object' isa 'Foo'
ok 2 - No warnings
ok 3 - No object
ok 4 - Die in init
ok 5 - No warnings
ok 6 - Have object
ok 7 - No destroy exception
ok 8 - pass
ok 9 - Die in destroy warning
ok 10 - No object
ok 11 - Die in init
ok 12 - Combined errors
ok 13 - No warnings
ok 14 - No object
ok 15 - Aborted
ok 16 - No warnings
ok 17 - No object
ok 18 - Aborted
ok 19 - Die in destroy warning
ok
t/28-lvalue.t ...............
1..182
ok 1 - Objects created
ok 2 - Foo->can(...)
ok 3 - rvalue set needs arg
ok 4 - rvalue set void
ok 5 - rvalue get void
ok 6 - rvalue set returns new
ok 7 - rvalue get
ok 8 - lvalue assign
ok 9 - lvalue assign (arg ignored)
ok 10 - lvalue re
ok 11 - lvalue
ok 12 - Checked
ok 13 - lvalue + arg new
ok 14 - Checked
ok 15 - chain set needs arg
ok 16 - chain self
ok 17 - chain new object
ok 18 - rvalue set needs arg
ok 19 - rvalue set void
ok 20 - rvalue get void
ok 21 - rvalue set returns old
ok 22 - rvalue get
ok 23 - lvalue assign
ok 24 - lvalue assign (arg ignored)
ok 25 - lvalue re
ok 26 - lvalue
ok 27 - Checked
ok 28 - lvalue + arg old
ok 29 - Checked
ok 30 - chain set needs arg
ok 31 - chain self
ok 32 - chain old object
ok 33 - rvalue set needs arg
ok 34 - rvalue set void
ok 35 - rvalue get void
ok 36 - rvalue set returns self
ok 37 - rvalue get
ok 38 - lvalue assign
ok 39 - lvalue assign (arg ignored)
ok 40 - lvalue re
ok 41 - lvalue
ok 42 - Checked
ok 43 - lvalue + arg self
ok 44 - Change did set
ok 45 - Checked
ok 46 - Check did set
ok 47 - chain set needs arg
ok 48 - chain self
ok 49 - chain self
ok 50 - rvalue set void
ok 51 - rvalue get void
ok 52 - rvalue set returns new
ok 53 - rvalue get
ok 54 - lvalue assign
ok 55 - lvalue assign (arg ignored)
ok 56 - lvalue re
ok 57 - lvalue
ok 58 - Checked
ok 59 - lvalue + arg new
ok 60 - Checked
ok 61 - chain get
ok 62 - chain self
ok 63 - chain new object
ok 64 - rvalue set void
ok 65 - rvalue get void
ok 66 - rvalue set returns old
ok 67 - rvalue get
ok 68 - lvalue assign
ok 69 - lvalue assign (arg ignored)
ok 70 - lvalue re
ok 71 - lvalue
ok 72 - Checked
ok 73 - lvalue + arg old
ok 74 - Checked
ok 75 - chain get
ok 76 - chain self
ok 77 - chain old object
ok 78 - rvalue set void
ok 79 - rvalue get void
ok 80 - rvalue set returns self
ok 81 - rvalue get
ok 82 - lvalue assign
ok 83 - lvalue assign (arg ignored)
ok 84 - lvalue re
ok 85 - lvalue
ok 86 - Checked
ok 87 - lvalue + arg self
ok 88 - Change did set
ok 89 - Checked
ok 90 - Check did set
ok 91 - chain get
ok 92 - chain self
ok 93 - chain self
ok 94 - rvalue set void
ok 95 - rvalue set void - bad
ok 96 - rvalue get void
ok 97 - rvalue set returns new
ok 98 - rvalue get
ok 99 - lvalue assign
ok 100 - lvalue assign - bad
ok 101 - lvalue assign (arg ignored)
ok 102 - lvalue re
ok 103 - lvalue re
ok 104 - lvalue - no type check
ok 105 - Checked
ok 106 - lvalue + arg new - no type check
ok 107 - Checked
ok 108 - chain get
ok 109 - chain new object
ok 110 - rvalue set void
ok 111 - rvalue get void
ok 112 - rvalue set returns old
ok 113 - rvalue get
ok 114 - lvalue assign
ok 115 - lvalue assign (arg ignored)
ok 116 - lvalue - no type check
ok 117 - Checked
ok 118 - lvalue + arg old
ok 119 - Checked
ok 120 - chain get
ok 121 - chain old object
ok 122 - rvalue set void
ok 123 - rvalue get void
ok 124 - rvalue set returns self
ok 125 - rvalue get
ok 126 - lvalue assign
ok 127 - lvalue assign (arg ignored)
ok 128 - lvalue - no type check
ok 129 - Checked
ok 130 - lvalue + arg self - no type check
ok 131 - Change did set
ok 132 - Checked
ok 133 - Check did set
ok 134 - chain get
ok 135 - chain self
ok 136 - rvalue set void
ok 137 - rvalue set void - bad
ok 138 - rvalue get void
ok 139 - rvalue set returns new
ok 140 - rvalue get
ok 141 - lvalue assign
ok 142 - lvalue assign - bad
ok 143 - lvalue assign (arg ignored)
ok 144 - lvalue re
ok 145 - lvalue - no type check
ok 146 - Checked
ok 147 - lvalue + arg new - no type check
ok 148 - Checked
ok 149 - chain get needs object
ok 150 - chain self
ok 151 - chain set
ok 152 - rvalue set void
ok 153 - rvalue get void
ok 154 - rvalue set returns old
ok 155 - rvalue get
ok 156 - lvalue assign
ok 157 - lvalue assign (arg ignored)
ok 158 - lvalue - no type check
ok 159 - Checked
ok 160 - lvalue + arg old
ok 161 - Checked
ok 162 - chain self
ok 163 - chain set
ok 164 - rvalue set void
ok 165 - rvalue get void
ok 166 - rvalue set returns self
ok 167 - rvalue set
ok 168 - rvalue get
ok 169 - lvalue assign
ok 170 - lvalue assign (arg ignored)
ok 171 - lvalue - no type check
ok 172 - Checked
ok 173 - lvalue + arg self - no type check
ok 174 - Change did set
ok 175 - Checked
ok 176 - Check did set
ok 177 - chain get needs object
ok 178 - chain self
ok 179 - chain set
ok 180 - lv array_ref subtype=hash
ok 181 - lv scalar_ref
ok 182 - lv scalar_ref value
ok
t/29-non_lvalue.t ...........
1..163
ok 1 - Objects created
ok 2 - Foo->can(...)
ok 3 - rvalue set needs arg
ok 4 - rvalue set void
ok 5 - rvalue get void
ok 6 - rvalue set returns new
ok 7 - rvalue get
ok 8 - not lvalue
ok 9 - lvalue does not work
ok 10 - Checked
ok 11 - chain set needs arg
ok 12 - chain self
ok 13 - chain new object
ok 14 - rvalue set needs arg
ok 15 - rvalue set void
ok 16 - rvalue get void
ok 17 - rvalue set returns old
ok 18 - rvalue get
ok 19 - not lvalue
ok 20 - not lvalue
ok 21 - lvalue does not work
ok 22 - Checked
ok 23 - chain set needs arg
ok 24 - chain self
ok 25 - chain set
ok 26 - chain old object
ok 27 - chain set
ok 28 - rvalue set needs arg
ok 29 - rvalue set void
ok 30 - rvalue get void
ok 31 - rvalue set returns self
ok 32 - rvalue get
ok 33 - not lvalue
ok 34 - lvalue does not work
ok 35 - Change did set
ok 36 - Checked
ok 37 - Check did set
ok 38 - chain get
ok 39 - chain set needs arg
ok 40 - chain self
ok 41 - chain set
ok 42 - chain self
ok 43 - chain set
ok 44 - rvalue set void
ok 45 - rvalue get void
ok 46 - rvalue set returns new
ok 47 - rvalue get
ok 48 - not lvalue
ok 49 - not lvalue
ok 50 - lvalue does not work
ok 51 - Checked
ok 52 - lvalue does not work
ok 53 - Checked
ok 54 - set
ok 55 - chain get
ok 56 - chain self
ok 57 - chain set
ok 58 - chain new object
ok 59 - chain set
ok 60 - rvalue set void
ok 61 - rvalue get void
ok 62 - rvalue set returns old
ok 63 - rvalue get
ok 64 - not lvalue
ok 65 - lvalue does not work
ok 66 - Checked
ok 67 - lvalue probably does not work
ok 68 - Checked
ok 69 - set
ok 70 - chain get
ok 71 - chain self
ok 72 - chain set
ok 73 - chain old object
ok 74 - chain set
ok 75 - rvalue set void
ok 76 - rvalue get void
ok 77 - rvalue set returns self
ok 78 - rvalue get
ok 79 - lvalue does not work
ok 80 - Checked
ok 81 - lvalue does not work
ok 82 - Change did set
ok 83 - Checked
ok 84 - Check did set
ok 85 - set
ok 86 - chain get
ok 87 - chain self
ok 88 - chain set
ok 89 - chain self
ok 90 - chain set
ok 91 - rvalue set void
ok 92 - rvalue set void - bad
ok 93 - rvalue get void
ok 94 - rvalue set returns new
ok 95 - rvalue get
ok 96 - not lvalue
ok 97 - not lvalue
ok 98 - not changed
ok 99 - not lvalue
ok 100 - not changed
ok 101 - lvalue does not work
ok 102 - Checked
ok 103 - lvalue does not work
ok 104 - Checked
ok 105 - chain get
ok 106 - chain new object
ok 107 - chain set
ok 108 - rvalue set void
ok 109 - rvalue get void
ok 110 - rvalue set returns old
ok 111 - rvalue get
ok 112 - lvalue does not work
ok 113 - Checked
ok 114 - lvalue does not work
ok 115 - Checked
ok 116 - set
ok 117 - chain get
ok 118 - chain old object
ok 119 - chain set
ok 120 - rvalue set void
ok 121 - rvalue get void
ok 122 - rvalue set returns self
ok 123 - rvalue get
ok 124 - lvalue does not work
ok 125 - Checked
ok 126 - lvalue does not work
ok 127 - Checked
ok 128 - Check did set
ok 129 - chain get
ok 130 - chain self
ok 131 - chain set
ok 132 - rvalue set void
ok 133 - rvalue set void - bad
ok 134 - rvalue get void
ok 135 - rvalue set returns new
ok 136 - rvalue get
ok 137 - not lvalue
ok 138 - lvalue does not work
ok 139 - Checked
ok 140 - lvalue does not work
ok 141 - Checked
ok 142 - chain get needs object
ok 143 - chain self
ok 144 - chain set
ok 145 - rvalue set void
ok 146 - rvalue get void
ok 147 - rvalue set returns old
ok 148 - rvalue get
ok 149 - lvalue does not work
ok 150 - Checked
ok 151 - chain self
ok 152 - chain set
ok 153 - rvalue set void
ok 154 - rvalue get void
ok 155 - rvalue set returns self
ok 156 - rvalue set
ok 157 - rvalue get
ok 158 - lvalue does not work
ok 159 - Checked
ok 160 - Check did set
ok 161 - chain get needs object
ok 162 - chain self
ok 163 - chain set
ok
t/30-all.t ..................
1..11
ok 1 - default assigned before :Init
ok 2 - Object created
ok 3 - num field
ok 4 - scalar field
ok 5 - int field
ok 6 - list field
ok 7 - hash field
ok 8 - default
ok 9 - Type check
ok 10 - Type check
ok 11 - Type check
ok
t/31-attr.t .................
1..5
ok 1 - Foo: D(ima_foo)
ok 2 - Bork: Test
ok 3 - Scalar default
ok 4 - Bar->can(...)
ok 5 - Fetch attr
ok
t/32-meta.t .................
1..43
ok 1 - Bar->can('meta')
ok 2 - Meta classes
ok 3 - Meta classes (ref)
ok 4 - ->isa() classes
ok 5 - ->isa() classes (ref)
ok 6 - Bar args
ok 7 - Bar args (ref)
ok 8 - Bar methods
ok 9 - Meta classes
ok 10 - Meta classes (ref)
ok 11 - ->isa() classes
ok 12 - ->isa() classes (ref)
ok 13 - Bar args
ok 14 - Bar args (ref)
ok 15 - Bar methods
ok 16 - An object of class 'Object::InsideOut::Metadata' isa 'Object::InsideOut::Metadata'
ok 17 - no subclasses
ok 18 - no subclasses (ref)
ok 19 - Meta args
ok 20 - Meta args (ref)
ok 21 - Meta methods
ok 22 - Meta methods (ref)
ok 23 - ->can() methods
ok 24 - ->can() methods (ref)
ok 25 - meta meta
ok 26 - An object of class 'Object::InsideOut::Metadata' isa 'Object::InsideOut::Metadata'
ok 27 - no subclasses
ok 28 - no subclasses (ref)
ok 29 - Meta args
ok 30 - Meta args (ref)
ok 31 - Meta methods
ok 32 - Meta methods (ref)
ok 33 - ->can() methods
ok 34 - ->can() methods (ref)
ok 35 - meta meta
ok 36 - cumulative results
ok 37 - no subclasses
ok 38 - no subclasses (ref)
ok 39 - Meta args
ok 40 - Meta args (ref)
ok 41 - Meta methods
ok 42 - Meta methods (ref)
ok 43 - No OIO meta
ok
t/33-hash_only.t ............
1..3
ok 1 - Get data
ok 2 - Get info
ok 3 - Hash only
ok
t/34-secure.t ............... skipped: Math::Random::MT::Auto not available
t/34a-secure.t .............. skipped: Math::Random::MT::Auto not available
t/35-add_class.t ............
1..7
ok 1 - Get data
ok 2 - Get info
ok 3 - Bar->can('is_selected')
ok 4 - Returns self
ok 5 - Selected
ok 6 - Get data
ok 7 - Get info
ok
t/36-require.t ..............
1..8
ok 1 - eval ok
ok 2 - field value for $n
ok 3 - field value for $m
ok 4 - eval ok
ok 5 - field value for $n
ok 6 - field value for $m
ok 7 - field value for $n
ok 8 - field value for $m
ok
t/37-class_perm.t ...........
1..12
ok 1 - 'Public class' isa 'Foo'
ok 2 - Restricted class
ok 3 - Private class
ok 4 - 'Restricted class in hierarchy' isa 'Bar'
ok 5 - 'Private class in class' isa 'Baz'
ok 6 - 'Restricted class exemption' isa 'Bar'
ok 7 - 'Private class exemption' isa 'Baz'
ok 8 - 'Public class' isa 'Ork'
ok 9 - Restricted class
ok 10 - 'Public class' isa 'Asker'
ok 11 - Data in public class
ok 12 - Access to restricted class
ok
t/38-combined.t .............
1..4
ok 1 - whoami
ok 2 - we_are
ok 3 - izza
ok 4 - bork
ok
t/39-fork.t ................. skipped: Not using pseudo-forks
t/40-normalize.t ............
1..6
ok 1 - Default for 'foo'
ok 2 - 'bar' not set
ok 3 - Default for 'foo'
ok 4 - 'bar' not set
ok 5 - Default for 'foo'
ok 6 - Default for 'bar'
ok
t/41-def.t ..................
1..4
ok 1
ok 2
ok 3
ok 4
ok
t/42-sh_obj.t ...............
1..29
ok 1 - Have cookie
ok 2 - Still have cookie
ok 3 - Still have cookie
ok 4 - Still have cookie
ok 5 - Have cookie in thread
ok 6 - Still have cookie in thread
ok 7 - Still have cookie in thread
ok 8 - Added cookie in thread
ok 9 - Still have original cookie after thread
ok 10 - Still have added cookie after thread
ok 11 - Fetched cookie from jar
ok 12 - Cookie still in jar
ok 13 - Fetched cookie from jar
ok 14 - New cookie in jar
ok 15 - Have cookie
ok 16 - Have cookie in thread
ok 17 - Change cookie in thread
ok 18 - Still have cookie in jar
ok 19 - Have changed cookie after thread
ok 20 - Still have cookie in jar
ok 21 - Still have cookie in jar
ok 22 - Fetched cookie from jar
ok 23 - Cookie in baggie in jar
ok 24 - Cookie foo in thread
ok 25 - Cookie in baggie in jar
ok 26 - Cookie foo in thread
ok 27 - Cookie foo in thread
ok 28 - Have changed cookie after thread
ok 29 - Wow
ok
t/43-overload.t .............
1..8
ok 1 - Shared objects are not the same
ok 2 - However, they equate
ok 3 - Different objects don't equate
ok 4 - Even if they have the same ID
ok 5 - Non-shared objects are the same
ok 6 - And they equate
ok 7 - ++ worked
ok 8 - Copy constuctor worked
ok
t/44-data.t .................
1..4
ok 1 - scalar
ok 2 - array
ok 3 - hash
ok 4 - ref
ok
t/45-unused.t ...............
1..16
ok 1 - Misspelled param
ok 2 - Misspelled param
ok 3 - :InitArg with no :Init
ok 4 - :InitArg with no :Init
ok 5 - Regex matches
ok 6 - No params
ok 7 - No :InitArg and no :Init
ok 8 - No :InitArg and no :Init
ok 9 - :Init with param
ok 10 - :Init with param
ok 11 - :Init with misspelled param
ok 12 - :Init with misspelled param
ok 13 - :Init and :InitArgs
ok 14 - :Init and :InitArgs
ok 15 - :InitArg and :Init with typo
ok 16 - :InitArg and :Init with typo
ok
t/46-singleton.t ............
1..1
ok 1 - Singleton fetch
ok
t/46a-singleton.t ...........
1..1
ok 1 - Singleton fetch
ok
t/47-sh_reuse.t .............
1..25
ok 1 - _init
ok 2 - main
ok 3 - _destroy
ok 4 - thread
ok 5 - returned
ok 6 - _init
ok 7 - main
ok 8 - _destroy
ok 9 - thread
ok 10 - returned
ok 11 - _init
ok 12 - main
ok 13 - _destroy
ok 14 - thread
ok 15 - returned
ok 16 - _init
ok 17 - main
ok 18 - _destroy
ok 19 - thread
ok 20 - returned
ok 21 - _init
ok 22 - main
ok 23 - _destroy
ok 24 - thread
ok 25 - returned
ok
t/48-not_shared.t ...........
1..4
ok 1
ok 2
ok 3
ok 4
ok
t/49-delegators.t ...........
1..11
ok 1 - engulf delegated to Borg->assimilate
ok 2 - admonish delegated to Federation
ok 3 - advise delegated to Federation
ok 4 - answer did not delegate
ok 5 - first :Handle works
ok 6 - second :Handle works
ok 7 - assimilate delegated to Borg
ok 8 - admonish delegated to Borg
ok 9 - advise delegated to Borg
ok 10 - assist delegated to Federation
ok 11 - answer did not delegate
ok
t/49a-delegators-non-OIO.t ..
1..4
ok 1 - Direct call to baz() works
ok 2 - Delegated bar() call works
ok 3 - Delegated foo() call works
ok 4 - Delegated other() call works
ok
t/50-active_defs.t ..........
1..58
ok 1 - First ID in sequence
ok 2 - Second ID in sequence
ok 3 - Third ID in sequence
ok 4 - Fourth rating in sequence
ok 5 - Fifth rating in sequence
ok 6 - Sixth rating in sequence
ok 7 - Seventh CCV in sequence
ok 8 - Eighth CCV in sequence
ok 9 - Ninth CCV in sequence
ok 10 - Seven is 7
ok 11 - Seven still 7
ok 12 - Seven always 7
ok 13 - Default via $self
ok 14 - Separate hashes
ok 15 - Separate hashes
ok 16 - Separate hashes
ok 17 - Default override
ok 18 - Separate hashes
ok 19 - Default override
ok 20 - Separate hashes
ok 21 - Default override
ok 22 - R1 for o1 is random
ok 23 - R1 for o2 is random
ok 24 - Rands are different
ok 25 - Default override
ok 26 - R2 for o2 is random
ok 27 - R2 for o3 is random
ok 28 - Rands are different
ok 29 - R3 for o1 is random
ok 30 - Default override
ok 31 - R3 for o3 is random
ok 32 - Rands are different
ok 33 - R4 for o1 is random
ok 34 - R4 for o2 is random
ok 35 - Default override
ok 36 - Rands are different
ok 37 - Private method access
ok 38 - Default override
ok 39 - Private method access
ok 40 - Private method access
ok 41 - Default override
ok 42 - Default override
ok 43 - Class method access
ok 44 - Class method access
ok 45 - Class method access
ok 46 - Class method access
ok 47 - Default code
ok 48 - Default code
ok 49 - Default code
ok 50 - Default override
ok 51 - Default code
ok 52 - Default code
ok 53 - Default code
ok 54 - Default override
ok 55 - Default code
ok 56 - Default code
ok 57 - Default code
ok 58 - Default override
ok
t/51-readonly.t .............
1..19
ok 1 - default assigned before :Init
ok 2 - Object created
ok 3 - num field
ok 4 - scalar field
ok 5 - int field
ok 6 - list field
ok 7 - hash field
ok 8 - default
ok 9 - no data setter
ok 10 - data value unchanged
ok 11 - no set_foo
ok 12 - no change in foo
ok 13 - no bar() setter
ok 14 - list field unchanged
ok 15 - no baz() setter
ok 16 - hash field unchanged
ok 17 - Type check
ok 18 - Type check
ok 19 - Type check
ok
t/99-pod.t .................. skipped: Module maintainer tests
All tests successful.
Files=67, Tests=1266, 8 wallclock secs ( 0.36 usr 0.16 sys + 6.64 cusr 1.04 csys = 8.20 CPU)
Result: PASS
create-stamp debian/debhelper-build-stamp
dh_prep
dh_auto_install --destdir=debian/libobject-insideout-perl/
/usr/bin/perl Build install --destdir /<<PKGBUILDDIR>>/debian/libobject-insideout-perl --create_packlist 0
Building Object-InsideOut
Installing /<<PKGBUILDDIR>>/debian/libobject-insideout-perl/usr/share/perl5/Bundle/Object/InsideOut.pm
Installing /<<PKGBUILDDIR>>/debian/libobject-insideout-perl/usr/share/perl5/Object/InsideOut.pm
Installing /<<PKGBUILDDIR>>/debian/libobject-insideout-perl/usr/share/perl5/Object/InsideOut.pod
Installing /<<PKGBUILDDIR>>/debian/libobject-insideout-perl/usr/share/perl5/Object/InsideOut/lvalue.pm
Installing /<<PKGBUILDDIR>>/debian/libobject-insideout-perl/usr/share/perl5/Object/InsideOut/Metadata.pm
Installing /<<PKGBUILDDIR>>/debian/libobject-insideout-perl/usr/share/perl5/Object/InsideOut/Exception.pm
Installing /<<PKGBUILDDIR>>/debian/libobject-insideout-perl/usr/share/perl5/Object/InsideOut/Autoload.pm
Installing /<<PKGBUILDDIR>>/debian/libobject-insideout-perl/usr/share/perl5/Object/InsideOut/Chained.pm
Installing /<<PKGBUILDDIR>>/debian/libobject-insideout-perl/usr/share/perl5/Object/InsideOut/Dump.pm
Installing /<<PKGBUILDDIR>>/debian/libobject-insideout-perl/usr/share/perl5/Object/InsideOut/Foreign.pm
Installing /<<PKGBUILDDIR>>/debian/libobject-insideout-perl/usr/share/perl5/Object/InsideOut/Cumulative.pm
Installing /<<PKGBUILDDIR>>/debian/libobject-insideout-perl/usr/share/perl5/Object/InsideOut/Dynamic.pm
Installing /<<PKGBUILDDIR>>/debian/libobject-insideout-perl/usr/share/perl5/Object/InsideOut/Secure.pm
Installing /<<PKGBUILDDIR>>/debian/libobject-insideout-perl/usr/share/perl5/Object/InsideOut/Util.pm
Installing /<<PKGBUILDDIR>>/debian/libobject-insideout-perl/usr/share/perl5/Object/InsideOut/Universal.pm
Installing /<<PKGBUILDDIR>>/debian/libobject-insideout-perl/usr/share/perl5/Object/InsideOut/Overload.pm
Installing /<<PKGBUILDDIR>>/debian/libobject-insideout-perl/usr/share/perl5/Object/InsideOut/attributes.pm
Installing /<<PKGBUILDDIR>>/debian/libobject-insideout-perl/usr/share/man/man3/Object::InsideOut::Metadata.3pm
Installing /<<PKGBUILDDIR>>/debian/libobject-insideout-perl/usr/share/man/man3/Object::InsideOut.3pm
Installing /<<PKGBUILDDIR>>/debian/libobject-insideout-perl/usr/share/man/man3/Bundle::Object::InsideOut.3pm
dh_installdocs
dh_installchangelogs
dh_installexamples
dh_installman
dh_perl
dh_link
dh_strip_nondeterminism
dh_compress
dh_fixperms
dh_missing
dh_installdeb
dh_gencontrol
dh_md5sums
dh_builddeb
dpkg-deb: building package 'libobject-insideout-perl' in '../libobject-insideout-perl_4.05-2_all.deb'.
dpkg-genbuildinfo --build=binary -O../libobject-insideout-perl_4.05-2_arm64.buildinfo
dpkg-genchanges --build=binary -O../libobject-insideout-perl_4.05-2_arm64.changes
dpkg-genchanges: info: binary-only upload (no source code included)
dpkg-source --after-build .
dpkg-buildpackage: info: binary-only upload (no source included)
--------------------------------------------------------------------------------
Build finished at 2024-11-17T03:41:15Z
Finished
--------
I: Built successfully
+------------------------------------------------------------------------------+
| Changes |
+------------------------------------------------------------------------------+
libobject-insideout-perl_4.05-2_arm64.changes:
----------------------------------------------
Format: 1.8
Date: Tue, 29 Nov 2022 22:41:28 +0000
Source: libobject-insideout-perl
Binary: libobject-insideout-perl
Architecture: all
Version: 4.05-2
Distribution: sid
Urgency: medium
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Changed-By: Jelmer Vernooij <jelmer@debian.org>
Description:
libobject-insideout-perl - comprehensive inside-out object construction kit
Changes:
libobject-insideout-perl (4.05-2) unstable; urgency=medium
.
[ gregor herrmann ]
* debian/watch: use uscan version 4.
.
[ Debian Janitor ]
* Remove constraints unnecessary since stretch:
+ Build-Depends-Indep: Drop versioned constraint on perl.
+ libobject-insideout-perl: Drop versioned constraint on perl in Depends.
* Bump debhelper from old 12 to 13.
Checksums-Sha1:
a61e66c3578537f7d716ab62faf2147e5af1aa67 125492 libobject-insideout-perl_4.05-2_all.deb
d863d4c6ce1409f65ec05ab9f83ed0e6bb853b59 4866 libobject-insideout-perl_4.05-2_arm64.buildinfo
Checksums-Sha256:
ecbe84878e7b1f7e396c62872bd00c762589942a9481f06ec3ce881b9e8b05b7 125492 libobject-insideout-perl_4.05-2_all.deb
2ff9dddf4f3fd5e980d5ef4a619c590ed2a5d9c693429f23ae26201d8b5caa01 4866 libobject-insideout-perl_4.05-2_arm64.buildinfo
Files:
18bee3ecbc3fea1aa68f6cf4fdeb9b37 125492 perl optional libobject-insideout-perl_4.05-2_all.deb
d868408481e22a511a5ecfc4e10d5b29 4866 perl optional libobject-insideout-perl_4.05-2_arm64.buildinfo
+------------------------------------------------------------------------------+
| Buildinfo |
+------------------------------------------------------------------------------+
Format: 1.0
Source: libobject-insideout-perl
Binary: libobject-insideout-perl
Architecture: all
Version: 4.05-2
Checksums-Md5:
18bee3ecbc3fea1aa68f6cf4fdeb9b37 125492 libobject-insideout-perl_4.05-2_all.deb
Checksums-Sha1:
a61e66c3578537f7d716ab62faf2147e5af1aa67 125492 libobject-insideout-perl_4.05-2_all.deb
Checksums-Sha256:
ecbe84878e7b1f7e396c62872bd00c762589942a9481f06ec3ce881b9e8b05b7 125492 libobject-insideout-perl_4.05-2_all.deb
Build-Origin: Debian
Build-Architecture: arm64
Build-Date: Sun, 17 Nov 2024 03:41:14 +0000
Build-Path: /<<PKGBUILDDIR>>
Build-Tainted-By:
merged-usr-via-aliased-dirs
Installed-Build-Depends:
autoconf (= 2.72-3),
automake (= 1:1.16.5-1.3),
autopoint (= 0.22.5-2),
autotools-dev (= 20220109.1),
base-files (= 13.5),
base-passwd (= 3.6.5),
bash (= 5.2.32-1+b2),
binutils (= 2.43.1-5),
binutils-aarch64-linux-gnu (= 2.43.1-5),
binutils-common (= 2.43.1-5),
bsdextrautils (= 2.40.2-11),
bsdutils (= 1:2.40.2-11),
build-essential (= 12.12),
bzip2 (= 1.0.8-6),
coreutils (= 9.5-1+b1),
cpp (= 4:14.2.0-1),
cpp-14 (= 14.2.0-8),
cpp-14-aarch64-linux-gnu (= 14.2.0-8),
cpp-aarch64-linux-gnu (= 4:14.2.0-1),
dash (= 0.5.12-9+b1),
debconf (= 1.5.87),
debhelper (= 13.20),
debianutils (= 5.21),
dh-autoreconf (= 20),
dh-strip-nondeterminism (= 1.14.0-1),
diffutils (= 1:3.10-1+b1),
dpkg (= 1.22.12~1.gbp82cafd),
dpkg-dev (= 1.22.12~1.gbp82cafd),
dwz (= 0.15-1+b1),
file (= 1:5.45-3+b1),
findutils (= 4.10.0-3),
g++ (= 4:14.2.0-1),
g++-14 (= 14.2.0-8),
g++-14-aarch64-linux-gnu (= 14.2.0-8),
g++-aarch64-linux-gnu (= 4:14.2.0-1),
gcc (= 4:14.2.0-1),
gcc-14 (= 14.2.0-8),
gcc-14-aarch64-linux-gnu (= 14.2.0-8),
gcc-14-base (= 14.2.0-8),
gcc-aarch64-linux-gnu (= 4:14.2.0-1),
gettext (= 0.22.5-2),
gettext-base (= 0.22.5-2),
grep (= 3.11-4+b1),
groff-base (= 1.23.0-5),
gzip (= 1.12-1.1+b1),
hostname (= 3.25),
init-system-helpers (= 1.67),
intltool-debian (= 0.35.0+20060710.6),
libacl1 (= 2.3.2-2+b1),
libarchive-zip-perl (= 1.68-1),
libasan8 (= 14.2.0-8),
libatomic1 (= 14.2.0-8),
libattr1 (= 1:2.5.2-2),
libaudit-common (= 1:4.0.2-2),
libaudit1 (= 1:4.0.2-2),
libbinutils (= 2.43.1-5),
libblkid1 (= 2.40.2-11),
libbz2-1.0 (= 1.0.8-6),
libc-bin (= 2.40-3),
libc-dev-bin (= 2.40-3),
libc6 (= 2.40-3),
libc6-dev (= 2.40-3),
libcap-ng0 (= 0.8.5-3+b1),
libcap2 (= 1:2.66-5+b1),
libcc1-0 (= 14.2.0-8),
libclass-data-inheritable-perl (= 0.10-1),
libcrypt-dev (= 1:4.4.36-5),
libcrypt1 (= 1:4.4.36-5),
libctf-nobfd0 (= 2.43.1-5),
libctf0 (= 2.43.1-5),
libdb5.3t64 (= 5.3.28+dfsg2-9),
libdebconfclient0 (= 0.273),
libdebhelper-perl (= 13.20),
libdevel-stacktrace-perl (= 2.0500-1),
libdpkg-perl (= 1.22.12~1.gbp82cafd),
libelf1t64 (= 0.192-4),
libexception-class-perl (= 1.45-1),
libfile-stripnondeterminism-perl (= 1.14.0-1),
libgcc-14-dev (= 14.2.0-8),
libgcc-s1 (= 14.2.0-8),
libgdbm-compat4t64 (= 1.24-2),
libgdbm6t64 (= 1.24-2),
libgmp10 (= 2:6.3.0+dfsg-2+b2),
libgomp1 (= 14.2.0-8),
libgprofng0 (= 2.43.1-5),
libhwasan0 (= 14.2.0-8),
libicu72 (= 72.1-5+b1),
libisl23 (= 0.27-1),
libitm1 (= 14.2.0-8),
libjansson4 (= 2.14-2+b3),
liblsan0 (= 14.2.0-8),
liblzma5 (= 5.6.3-1+b1),
libmagic-mgc (= 1:5.45-3+b1),
libmagic1t64 (= 1:5.45-3+b1),
libmd0 (= 1.1.0-2+b1),
libmodule-build-perl (= 0.423400-2),
libmount1 (= 2.40.2-11),
libmpc3 (= 1.3.1-1+b3),
libmpfr6 (= 4.2.1-1+b2),
libpam-modules (= 1.5.3-7+b1),
libpam-modules-bin (= 1.5.3-7+b1),
libpam-runtime (= 1.5.3-7),
libpam0g (= 1.5.3-7+b1),
libpcre2-8-0 (= 10.44-4),
libperl5.40 (= 5.40.0-7),
libpipeline1 (= 1.5.8-1),
libseccomp2 (= 2.5.5-1+b3),
libselinux1 (= 3.7-3+b1),
libsframe1 (= 2.43.1-5),
libsmartcols1 (= 2.40.2-11),
libssl3t64 (= 3.3.2-2),
libstdc++-14-dev (= 14.2.0-8),
libstdc++6 (= 14.2.0-8),
libsystemd0 (= 257~rc2-3),
libtinfo6 (= 6.5-2+b1),
libtool (= 2.4.7-8),
libtsan2 (= 14.2.0-8),
libubsan1 (= 14.2.0-8),
libuchardet0 (= 0.0.8-1+b2),
libudev1 (= 257~rc2-3),
libunistring5 (= 1.2-1+b1),
libuuid1 (= 2.40.2-11),
libwant-perl (= 0.29-2+b4),
libxml2 (= 2.12.7+dfsg+really2.9.14-0.2+b1),
libzstd1 (= 1.5.6+dfsg-1+b1),
linux-libc-dev (= 6.11.7-1),
m4 (= 1.4.19-4),
make (= 4.3-4.1+b1),
man-db (= 2.13.0-1),
mawk (= 1.3.4.20240905-1),
ncurses-base (= 6.5-2),
ncurses-bin (= 6.5-2+b1),
openssl-provider-legacy (= 3.3.2-2),
patch (= 2.7.6-7+b1),
perl (= 5.40.0-7),
perl-base (= 5.40.0-7),
perl-modules-5.40 (= 5.40.0-7),
po-debconf (= 1.0.21+nmu1),
rpcsvc-proto (= 1.4.3-1+b1),
sed (= 4.9-2+b1),
sensible-utils (= 0.0.24),
sysvinit-utils (= 3.11-1),
tar (= 1.35+dfsg-3+b1),
util-linux (= 2.40.2-11),
xz-utils (= 5.6.3-1+b1),
zlib1g (= 1:1.3.dfsg+really1.3.1-1+b1)
Environment:
DEB_BUILD_OPTIONS="parallel=4"
LANG="en_US.UTF-8"
LC_ALL="C.UTF-8"
SOURCE_DATE_EPOCH="1669761688"
+------------------------------------------------------------------------------+
| Package contents |
+------------------------------------------------------------------------------+
libobject-insideout-perl_4.05-2_all.deb
---------------------------------------
new Debian package, version 2.0.
size 125492 bytes: control archive=1460 bytes.
839 bytes, 17 lines control
1919 bytes, 24 lines md5sums
Package: libobject-insideout-perl
Version: 4.05-2
Architecture: all
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Installed-Size: 416
Depends: perl:any, libexception-class-perl, perl
Suggests: libwant-perl
Section: perl
Priority: optional
Homepage: https://metacpan.org/release/Object-InsideOut
Description: comprehensive inside-out object construction kit
Object::InsideOut is a Perl module that implements inside-out objects as
anonymous scalar references that are blessed into a class with the scalar
containing the ID for the object (usually a sequence number). The scalar
reference is set as read-only to prevent accidental modifications to the ID.
Object data (such as fields) are stored within the class's package in either
arrays indexed by the object's ID, or hashes keyed to the object's ID.
drwxr-xr-x root/root 0 2022-11-29 22:41 ./
drwxr-xr-x root/root 0 2022-11-29 22:41 ./usr/
drwxr-xr-x root/root 0 2022-11-29 22:41 ./usr/share/
drwxr-xr-x root/root 0 2022-11-29 22:41 ./usr/share/doc/
drwxr-xr-x root/root 0 2022-11-29 22:41 ./usr/share/doc/libobject-insideout-perl/
-rw-r--r-- root/root 859 2022-11-29 22:41 ./usr/share/doc/libobject-insideout-perl/changelog.Debian.gz
-rw-r--r-- root/root 6171 2018-11-27 03:42 ./usr/share/doc/libobject-insideout-perl/changelog.gz
-rw-r--r-- root/root 1174 2022-11-29 22:41 ./usr/share/doc/libobject-insideout-perl/copyright
drwxr-xr-x root/root 0 2022-11-29 22:41 ./usr/share/doc/libobject-insideout-perl/examples/
-rw-r--r-- root/root 15597 2018-11-27 03:42 ./usr/share/doc/libobject-insideout-perl/examples/YAPI.pm
drwxr-xr-x root/root 0 2022-11-29 22:41 ./usr/share/man/
drwxr-xr-x root/root 0 2022-11-29 22:41 ./usr/share/man/man3/
-rw-r--r-- root/root 1791 2022-11-29 22:41 ./usr/share/man/man3/Bundle::Object::InsideOut.3pm.gz
-rw-r--r-- root/root 38046 2022-11-29 22:41 ./usr/share/man/man3/Object::InsideOut.3pm.gz
-rw-r--r-- root/root 6021 2022-11-29 22:41 ./usr/share/man/man3/Object::InsideOut::Metadata.3pm.gz
drwxr-xr-x root/root 0 2022-11-29 22:41 ./usr/share/perl5/
drwxr-xr-x root/root 0 2022-11-29 22:41 ./usr/share/perl5/Bundle/
drwxr-xr-x root/root 0 2022-11-29 22:41 ./usr/share/perl5/Bundle/Object/
-rw-r--r-- root/root 2478 2022-11-29 22:41 ./usr/share/perl5/Bundle/Object/InsideOut.pm
drwxr-xr-x root/root 0 2022-11-29 22:41 ./usr/share/perl5/Object/
-rw-r--r-- root/root 107475 2022-11-29 22:41 ./usr/share/perl5/Object/InsideOut.pm
-rw-r--r-- root/root 116653 2022-11-29 22:41 ./usr/share/perl5/Object/InsideOut.pod
drwxr-xr-x root/root 0 2022-11-29 22:41 ./usr/share/perl5/Object/InsideOut/
-rw-r--r-- root/root 7459 2022-11-29 22:41 ./usr/share/perl5/Object/InsideOut/Autoload.pm
-rw-r--r-- root/root 6693 2022-11-29 22:41 ./usr/share/perl5/Object/InsideOut/Chained.pm
-rw-r--r-- root/root 8563 2022-11-29 22:41 ./usr/share/perl5/Object/InsideOut/Cumulative.pm
-rw-r--r-- root/root 7219 2022-11-29 22:41 ./usr/share/perl5/Object/InsideOut/Dump.pm
-rw-r--r-- root/root 5332 2022-11-29 22:41 ./usr/share/perl5/Object/InsideOut/Dynamic.pm
-rw-r--r-- root/root 6011 2022-11-29 22:41 ./usr/share/perl5/Object/InsideOut/Exception.pm
-rw-r--r-- root/root 8336 2022-11-29 22:41 ./usr/share/perl5/Object/InsideOut/Foreign.pm
-rw-r--r-- root/root 22267 2022-11-29 22:41 ./usr/share/perl5/Object/InsideOut/Metadata.pm
-rw-r--r-- root/root 2646 2022-11-29 22:41 ./usr/share/perl5/Object/InsideOut/Overload.pm
-rw-r--r-- root/root 716 2022-11-29 22:41 ./usr/share/perl5/Object/InsideOut/Secure.pm
-rw-r--r-- root/root 8029 2022-11-29 22:41 ./usr/share/perl5/Object/InsideOut/Universal.pm
-rw-r--r-- root/root 11509 2022-11-29 22:41 ./usr/share/perl5/Object/InsideOut/Util.pm
-rw-r--r-- root/root 2448 2022-11-29 22:41 ./usr/share/perl5/Object/InsideOut/attributes.pm
-rw-r--r-- root/root 5173 2022-11-29 22:41 ./usr/share/perl5/Object/InsideOut/lvalue.pm
lintian
-------
Setup apt archive
-----------------
Merged Build-Depends: lintian
Filtered Build-Depends: lintian
dpkg-deb: warning: root directory has unusual owner or group 998:999.
Hint: either pass --root-owner-group, see dpkg-build-api(7) or add an explicit 'Rules-Requires-Root: no' in debian/control.
dpkg-deb: warning: ignoring 1 warning about the control file(s)
dpkg-deb: building package 'sbuild-build-depends-lintian-dummy' in '/<<RESOLVERDIR>>/apt_archive/sbuild-build-depends-lintian-dummy.deb'.
Ign:1 copy:/<<RESOLVERDIR>>/apt_archive ./ InRelease
Get:2 copy:/<<RESOLVERDIR>>/apt_archive ./ Release [615 B]
Ign:3 copy:/<<RESOLVERDIR>>/apt_archive ./ Release.gpg
Get:4 copy:/<<RESOLVERDIR>>/apt_archive ./ Sources [1286 B]
Get:5 copy:/<<RESOLVERDIR>>/apt_archive ./ Packages [1328 B]
Fetched 3229 B in 0s (282 kB/s)
Reading package lists...
Get:1 file:/<<BUILDDIR>>/resolver-bWOKjY/apt_archive ./ InRelease
Ign:1 file:/<<BUILDDIR>>/resolver-bWOKjY/apt_archive ./ InRelease
Get:2 file:/<<BUILDDIR>>/resolver-bWOKjY/apt_archive ./ Release [606 B]
Get:2 file:/<<BUILDDIR>>/resolver-bWOKjY/apt_archive ./ Release [606 B]
Get:3 file:/<<BUILDDIR>>/resolver-bWOKjY/apt_archive ./ Release.gpg
Ign:3 file:/<<BUILDDIR>>/resolver-bWOKjY/apt_archive ./ Release.gpg
Reading package lists...
Reading package lists...
Install lintian build dependencies (apt-based resolver)
-------------------------------------------------------
Installing build dependencies
Reading package lists...
Building dependency tree...
Reading state information...
The following NEW packages will be installed:
sbuild-build-depends-lintian-dummy
0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded.
Need to get 852 B of archives.
After this operation, 0 B of additional disk space will be used.
Get:1 copy:/<<RESOLVERDIR>>/apt_archive ./ sbuild-build-depends-lintian-dummy 0.invalid.0 [852 B]
debconf: delaying package configuration, since apt-utils is not installed
Fetched 852 B in 0s (0 B/s)
Selecting previously unselected package sbuild-build-depends-lintian-dummy.
(Reading database ... 22607 files and directories currently installed.)
Preparing to unpack .../sbuild-build-depends-lintian-dummy_0.invalid.0_arm64.deb ...
Unpacking sbuild-build-depends-lintian-dummy (0.invalid.0) ...
Setting up sbuild-build-depends-lintian-dummy (0.invalid.0) ...
Running lintian...
W: libobject-insideout-perl changes: distribution-and-changes-mismatch sid unstable
W: libobject-insideout-perl source: no-nmu-in-changelog [debian/changelog:1]
W: libobject-insideout-perl source: source-nmu-has-incorrect-version-number 4.05-2 [debian/changelog:1]
I: Lintian run was successful.
+------------------------------------------------------------------------------+
| Post Build |
+------------------------------------------------------------------------------+
+------------------------------------------------------------------------------+
| Cleanup |
+------------------------------------------------------------------------------+
Purging /<<BUILDDIR>>
Not cleaning session: cloned chroot in use
+------------------------------------------------------------------------------+
| Summary |
+------------------------------------------------------------------------------+
Build Architecture: arm64
Build Type: binary
Build-Space: 2220
Build-Time: 14
Distribution: sid
Host Architecture: arm64
Install-Time: 17
Job: /tmp/debusine-fetch-exec-upload-10ra1sgn/libobject-insideout-perl_4.05-2.dsc
Lintian: warn
Machine Architecture: arm64
Package: libobject-insideout-perl
Package-Time: 66
Source-Version: 4.05-2
Space: 2220
Status: successful
Version: 4.05-2
--------------------------------------------------------------------------------
Finished at 2024-11-17T03:41:15Z
Build needed 00:01:06, 2220k disk space