sbuild (Debian sbuild) 0.86.3~bpo12+1 (03 November 2024) on debusine-worker-arm64-demeter-07.freexian.com
+==============================================================================+
| libpod-readme-perl 1.2.3-1 (arm64) Sun, 17 Nov 2024 04:13:13 +0000 |
+==============================================================================+
Package: libpod-readme-perl
Version: 1.2.3-1
Source Version: 1.2.3-1
Distribution: sid
Machine Architecture: arm64
Host Architecture: arm64
Build Architecture: arm64
Build Type: binary
I: No tarballs found in /var/lib/debusine/worker/.cache/sbuild
Unpacking /var/lib/debusine/worker/system-images/957781/system.tar.xz to /tmp/tmp.sbuild.NRCFk5SJrY...
I: NOTICE: Log filtering will replace 'sbuild-unshare-dummy-location' with '<<CHROOT>>'
+------------------------------------------------------------------------------+
| Chroot Setup Commands |
+------------------------------------------------------------------------------+
rm -f /etc/resolv.conf
----------------------
I: Finished running 'rm -f /etc/resolv.conf'.
Finished processing commands.
--------------------------------------------------------------------------------
Copying /tmp/debusine-fetch-exec-upload-6keg2za1/dpkg-dbgsym_1.22.12~1.gbp82cafd_arm64.deb to /<<CHROOT>>...
Copying /tmp/debusine-fetch-exec-upload-6keg2za1/dpkg_1.22.12~1.gbp82cafd_arm64.deb to /<<CHROOT>>...
Copying /tmp/debusine-fetch-exec-upload-6keg2za1/dselect-dbgsym_1.22.12~1.gbp82cafd_arm64.deb to /<<CHROOT>>...
Copying /tmp/debusine-fetch-exec-upload-6keg2za1/dselect_1.22.12~1.gbp82cafd_arm64.deb to /<<CHROOT>>...
Copying /tmp/debusine-fetch-exec-upload-6keg2za1/libdpkg-dev_1.22.12~1.gbp82cafd_arm64.deb to /<<CHROOT>>...
Copying /tmp/debusine-fetch-exec-upload-6keg2za1/dpkg-dev_1.22.12~1.gbp82cafd_all.deb to /<<CHROOT>>...
Copying /tmp/debusine-fetch-exec-upload-6keg2za1/libdpkg-perl_1.22.12~1.gbp82cafd_all.deb to /<<CHROOT>>...
I: NOTICE: Log filtering will replace 'build/libpod-readme-perl-KN9UO8/resolver-Lee8bD' with '<<RESOLVERDIR>>'
+------------------------------------------------------------------------------+
| Update chroot |
+------------------------------------------------------------------------------+
Get:1 file:/build/libpod-readme-perl-KN9UO8/resolver-5Ng4Cj/apt_archive ./ InRelease
Ign:1 file:/build/libpod-readme-perl-KN9UO8/resolver-5Ng4Cj/apt_archive ./ InRelease
Get:2 file:/build/libpod-readme-perl-KN9UO8/resolver-5Ng4Cj/apt_archive ./ Release [606 B]
Get:3 http://deb.debian.org/debian sid InRelease [202 kB]
Get:2 file:/build/libpod-readme-perl-KN9UO8/resolver-5Ng4Cj/apt_archive ./ Release [606 B]
Get:4 file:/build/libpod-readme-perl-KN9UO8/resolver-5Ng4Cj/apt_archive ./ Release.gpg
Ign:4 file:/build/libpod-readme-perl-KN9UO8/resolver-5Ng4Cj/apt_archive ./ Release.gpg
Get:5 file:/build/libpod-readme-perl-KN9UO8/resolver-5Ng4Cj/apt_archive ./ Packages [9246 B]
Get:6 http://deb.debian.org/debian sid/main arm64 Packages [9952 kB]
Get:7 http://deb.debian.org/debian sid/main arm64 Components [4907 kB]
Fetched 15.1 MB in 2s (6338 kB/s)
Reading package lists...
Reading package lists...
Building dependency tree...
Reading state information...
Calculating upgrade...
The following packages will be upgraded:
apt bsdextrautils bsdutils debianutils dpkg dpkg-dev libapt-pkg6.0t64
libaudit-common libaudit1 libblkid1 libbrotli1 libcap-ng0 libdpkg-perl
libglib2.0-0t64 libmarkdown2 libmount1 libpcre2-8-0 libseccomp2 libselinux1
libsemanage2 libsmartcols1 libsystemd0 libudev1 libuuid1 libxml2 login
login.defs mount passwd util-linux
30 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
Need to get 9274 kB/12.8 MB of archives.
After this operation, 603 kB disk space will be freed.
Get:1 http://deb.debian.org/debian sid/main arm64 bsdutils arm64 1:2.40.2-11 [104 kB]
Get:2 file:/build/libpod-readme-perl-KN9UO8/resolver-5Ng4Cj/apt_archive ./ dpkg 1.22.12~1.gbp82cafd [1513 kB]
Get:3 http://deb.debian.org/debian sid/main arm64 debianutils arm64 5.21 [92.1 kB]
Get:4 http://deb.debian.org/debian sid/main arm64 libsystemd0 arm64 257~rc2-3 [416 kB]
Get:5 file:/build/libpod-readme-perl-KN9UO8/resolver-5Ng4Cj/apt_archive ./ dpkg-dev 1.22.12~1.gbp82cafd [1337 kB]
Get:6 file:/build/libpod-readme-perl-KN9UO8/resolver-5Ng4Cj/apt_archive ./ libdpkg-perl 1.22.12~1.gbp82cafd [647 kB]
Get:7 http://deb.debian.org/debian sid/main arm64 libudev1 arm64 257~rc2-3 [139 kB]
Get:8 http://deb.debian.org/debian sid/main arm64 libapt-pkg6.0t64 arm64 2.9.11 [921 kB]
Get:9 http://deb.debian.org/debian sid/main arm64 bsdextrautils arm64 2.40.2-11 [91.2 kB]
Get:10 http://deb.debian.org/debian sid/main arm64 libblkid1 arm64 2.40.2-11 [162 kB]
Get:11 http://deb.debian.org/debian sid/main arm64 libmount1 arm64 2.40.2-11 [190 kB]
Get:12 http://deb.debian.org/debian sid/main arm64 libsmartcols1 arm64 2.40.2-11 [135 kB]
Get:13 http://deb.debian.org/debian sid/main arm64 mount arm64 2.40.2-11 [153 kB]
Get:14 http://deb.debian.org/debian sid/main arm64 libuuid1 arm64 2.40.2-11 [35.7 kB]
Get:15 http://deb.debian.org/debian sid/main arm64 util-linux arm64 2.40.2-11 [1170 kB]
Get:16 http://deb.debian.org/debian sid/main arm64 libpcre2-8-0 arm64 10.44-4 [243 kB]
Get:17 http://deb.debian.org/debian sid/main arm64 libselinux1 arm64 3.7-3+b1 [72.1 kB]
Get:18 http://deb.debian.org/debian sid/main arm64 libseccomp2 arm64 2.5.5-1+b3 [46.8 kB]
Get:19 http://deb.debian.org/debian sid/main arm64 apt arm64 2.9.11 [1287 kB]
Get:20 http://deb.debian.org/debian sid/main arm64 libaudit-common all 1:4.0.2-2 [12.7 kB]
Get:21 http://deb.debian.org/debian sid/main arm64 libcap-ng0 arm64 0.8.5-3+b1 [17.0 kB]
Get:22 http://deb.debian.org/debian sid/main arm64 libaudit1 arm64 1:4.0.2-2 [54.2 kB]
Get:23 http://deb.debian.org/debian sid/main arm64 login arm64 1:4.16.0-2+really2.40.2-11 [80.0 kB]
Get:24 http://deb.debian.org/debian sid/main arm64 login.defs all 1:4.16.0-5 [185 kB]
Get:25 http://deb.debian.org/debian sid/main arm64 libsemanage2 arm64 3.7-2+b1 [84.5 kB]
Get:26 http://deb.debian.org/debian sid/main arm64 passwd arm64 1:4.16.0-5 [1210 kB]
Get:27 http://deb.debian.org/debian sid/main arm64 libbrotli1 arm64 1.1.0-2+b6 [297 kB]
Get:28 http://deb.debian.org/debian sid/main arm64 libglib2.0-0t64 arm64 2.82.2-3 [1411 kB]
Get:29 http://deb.debian.org/debian sid/main arm64 libmarkdown2 arm64 2.2.7-2.1 [33.1 kB]
Get:30 http://deb.debian.org/debian sid/main arm64 libxml2 arm64 2.12.7+dfsg+really2.9.14-0.2+b1 [630 kB]
debconf: delaying package configuration, since apt-utils is not installed
Fetched 9274 kB in 0s (63.1 MB/s)
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 17129 files and directories currently installed.)
Preparing to unpack .../bsdutils_1%3a2.40.2-11_arm64.deb ...
Unpacking bsdutils (1:2.40.2-11) over (1:2.40.2-10) ...
Setting up bsdutils (1:2.40.2-11) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 17129 files and directories currently installed.)
Preparing to unpack .../debianutils_5.21_arm64.deb ...
Unpacking debianutils (5.21) over (5.20+b1) ...
Setting up debianutils (5.21) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 17128 files and directories currently installed.)
Preparing to unpack .../libsystemd0_257~rc2-3_arm64.deb ...
Unpacking libsystemd0:arm64 (257~rc2-3) over (257~rc1-4) ...
Setting up libsystemd0:arm64 (257~rc2-3) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 17128 files and directories currently installed.)
Preparing to unpack .../libudev1_257~rc2-3_arm64.deb ...
Unpacking libudev1:arm64 (257~rc2-3) over (257~rc1-4) ...
Setting up libudev1:arm64 (257~rc2-3) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 17128 files and directories currently installed.)
Preparing to unpack .../libapt-pkg6.0t64_2.9.11_arm64.deb ...
Unpacking libapt-pkg6.0t64:arm64 (2.9.11) over (2.9.10) ...
Setting up libapt-pkg6.0t64:arm64 (2.9.11) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 17128 files and directories currently installed.)
Preparing to unpack .../dpkg_1.22.12~1.gbp82cafd_arm64.deb ...
Unpacking dpkg (1.22.12~1.gbp82cafd) over (1.22.11) ...
Setting up dpkg (1.22.12~1.gbp82cafd) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 17127 files and directories currently installed.)
Preparing to unpack .../bsdextrautils_2.40.2-11_arm64.deb ...
Unpacking bsdextrautils (2.40.2-11) over (2.40.2-10) ...
Preparing to unpack .../libblkid1_2.40.2-11_arm64.deb ...
Unpacking libblkid1:arm64 (2.40.2-11) over (2.40.2-10) ...
Setting up libblkid1:arm64 (2.40.2-11) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 17123 files and directories currently installed.)
Preparing to unpack .../libmount1_2.40.2-11_arm64.deb ...
Unpacking libmount1:arm64 (2.40.2-11) over (2.40.2-10) ...
Setting up libmount1:arm64 (2.40.2-11) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 17123 files and directories currently installed.)
Preparing to unpack .../libsmartcols1_2.40.2-11_arm64.deb ...
Unpacking libsmartcols1:arm64 (2.40.2-11) over (2.40.2-10) ...
Setting up libsmartcols1:arm64 (2.40.2-11) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 17123 files and directories currently installed.)
Preparing to unpack .../mount_2.40.2-11_arm64.deb ...
Unpacking mount (2.40.2-11) over (2.40.2-10) ...
Preparing to unpack .../libuuid1_2.40.2-11_arm64.deb ...
Unpacking libuuid1:arm64 (2.40.2-11) over (2.40.2-10) ...
Setting up libuuid1:arm64 (2.40.2-11) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 17123 files and directories currently installed.)
Preparing to unpack .../util-linux_2.40.2-11_arm64.deb ...
Unpacking util-linux (2.40.2-11) over (2.40.2-10) ...
Setting up util-linux (2.40.2-11) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 17120 files and directories currently installed.)
Preparing to unpack .../libpcre2-8-0_10.44-4_arm64.deb ...
Unpacking libpcre2-8-0:arm64 (10.44-4) over (10.42-4+b2) ...
Setting up libpcre2-8-0:arm64 (10.44-4) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 17119 files and directories currently installed.)
Preparing to unpack .../libselinux1_3.7-3+b1_arm64.deb ...
Unpacking libselinux1:arm64 (3.7-3+b1) over (3.7-3) ...
Setting up libselinux1:arm64 (3.7-3+b1) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 17120 files and directories currently installed.)
Preparing to unpack .../libseccomp2_2.5.5-1+b3_arm64.deb ...
Unpacking libseccomp2:arm64 (2.5.5-1+b3) over (2.5.5-1+b2) ...
Setting up libseccomp2:arm64 (2.5.5-1+b3) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 17120 files and directories currently installed.)
Preparing to unpack .../archives/apt_2.9.11_arm64.deb ...
Unpacking apt (2.9.11) over (2.9.10) ...
Setting up apt (2.9.11) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 17117 files and directories currently installed.)
Preparing to unpack .../libaudit-common_1%3a4.0.2-2_all.deb ...
Unpacking libaudit-common (1:4.0.2-2) over (1:4.0.1-3) ...
Setting up libaudit-common (1:4.0.2-2) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 17117 files and directories currently installed.)
Preparing to unpack .../libcap-ng0_0.8.5-3+b1_arm64.deb ...
Unpacking libcap-ng0:arm64 (0.8.5-3+b1) over (0.8.5-3) ...
Setting up libcap-ng0:arm64 (0.8.5-3+b1) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 17118 files and directories currently installed.)
Preparing to unpack .../libaudit1_1%3a4.0.2-2_arm64.deb ...
Unpacking libaudit1:arm64 (1:4.0.2-2) over (1:4.0.1-3) ...
Setting up libaudit1:arm64 (1:4.0.2-2) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 17118 files and directories currently installed.)
Preparing to unpack .../0-login_1%3a4.16.0-2+really2.40.2-11_arm64.deb ...
Unpacking login (1:4.16.0-2+really2.40.2-11) over (1:4.16.0-2+really2.40.2-10) ...
Preparing to unpack .../1-login.defs_1%3a4.16.0-5_all.deb ...
Unpacking login.defs (1:4.16.0-5) over (1:4.16.0-4) ...
Preparing to unpack .../2-libsemanage2_3.7-2+b1_arm64.deb ...
Unpacking libsemanage2:arm64 (3.7-2+b1) over (3.7-2) ...
Preparing to unpack .../3-passwd_1%3a4.16.0-5_arm64.deb ...
Unpacking passwd (1:4.16.0-5) over (1:4.16.0-4) ...
Preparing to unpack .../4-dpkg-dev_1.22.12~1.gbp82cafd_all.deb ...
Unpacking dpkg-dev (1.22.12~1.gbp82cafd) over (1.22.11) ...
Preparing to unpack .../5-libdpkg-perl_1.22.12~1.gbp82cafd_all.deb ...
Unpacking libdpkg-perl (1.22.12~1.gbp82cafd) over (1.22.11) ...
Preparing to unpack .../6-libbrotli1_1.1.0-2+b6_arm64.deb ...
Unpacking libbrotli1:arm64 (1.1.0-2+b6) over (1.1.0-2+b5) ...
Preparing to unpack .../7-libglib2.0-0t64_2.82.2-3_arm64.deb ...
Unpacking libglib2.0-0t64:arm64 (2.82.2-3) over (2.82.2-2) ...
Preparing to unpack .../8-libmarkdown2_2.2.7-2.1_arm64.deb ...
Unpacking libmarkdown2:arm64 (2.2.7-2.1) over (2.2.7-2+b1) ...
Preparing to unpack .../9-libxml2_2.12.7+dfsg+really2.9.14-0.2+b1_arm64.deb ...
Unpacking libxml2:arm64 (2.12.7+dfsg+really2.9.14-0.2+b1) over (2.12.7+dfsg+really2.9.14-0.1) ...
Setting up bsdextrautils (2.40.2-11) ...
Setting up login.defs (1:4.16.0-5) ...
Installing new version of config file /etc/login.defs ...
Setting up libbrotli1:arm64 (1.1.0-2+b6) ...
Setting up libglib2.0-0t64:arm64 (2.82.2-3) ...
No schema files found: doing nothing.
Setting up libdpkg-perl (1.22.12~1.gbp82cafd) ...
Setting up mount (2.40.2-11) ...
Setting up libsemanage2:arm64 (3.7-2+b1) ...
Setting up libxml2:arm64 (2.12.7+dfsg+really2.9.14-0.2+b1) ...
Setting up libmarkdown2:arm64 (2.2.7-2.1) ...
Setting up login (1:4.16.0-2+really2.40.2-11) ...
Setting up dpkg-dev (1.22.12~1.gbp82cafd) ...
Setting up passwd (1:4.16.0-5) ...
Processing triggers for man-db (2.13.0-1) ...
Processing triggers for libc-bin (2.40-3) ...
+------------------------------------------------------------------------------+
| Fetch source files |
+------------------------------------------------------------------------------+
Local sources
-------------
/tmp/debusine-fetch-exec-upload-6keg2za1/libpod-readme-perl_1.2.3-1.dsc exists in /tmp/debusine-fetch-exec-upload-6keg2za1; copying to chroot
I: NOTICE: Log filtering will replace 'build/libpod-readme-perl-KN9UO8/libpod-readme-perl-1.2.3' with '<<PKGBUILDDIR>>'
I: NOTICE: Log filtering will replace 'build/libpod-readme-perl-KN9UO8' with '<<BUILDDIR>>'
+------------------------------------------------------------------------------+
| Install package build dependencies |
+------------------------------------------------------------------------------+
Setup apt archive
-----------------
Merged Build-Depends: debhelper (>= 10), build-essential, fakeroot, libclass-method-modifiers-perl (>= 2.00), libcpan-changes-perl (>= 0.30), libfile-slurp-perl, libgetopt-long-descriptive-perl, libio-string-perl, libmoo-perl (>= 1.004005), libmoox-handlesvia-perl, libnamespace-autoclean-perl, libpath-tiny-perl, librole-tiny-perl, libtest-deep-perl, libtest-exception-perl, libtry-tiny-perl, libtype-tiny-perl, perl, perl (>= 5.19.5) | libscalar-list-utils-perl (>= 1:1.33)
Filtered Build-Depends: debhelper (>= 10), build-essential, fakeroot, libclass-method-modifiers-perl (>= 2.00), libcpan-changes-perl (>= 0.30), libfile-slurp-perl, libgetopt-long-descriptive-perl, libio-string-perl, libmoo-perl (>= 1.004005), libmoox-handlesvia-perl, libnamespace-autoclean-perl, libpath-tiny-perl, librole-tiny-perl, libtest-deep-perl, libtest-exception-perl, libtry-tiny-perl, libtype-tiny-perl, perl, perl (>= 5.19.5)
dpkg-deb: warning: root directory has unusual owner or group 998:999.
Hint: either pass --root-owner-group, see dpkg-build-api(7) or add an explicit 'Rules-Requires-Root: no' in debian/control.
dpkg-deb: warning: ignoring 1 warning about the control file(s)
dpkg-deb: building package 'sbuild-build-depends-main-dummy' in '/<<RESOLVERDIR>>/apt_archive/sbuild-build-depends-main-dummy.deb'.
Ign:1 copy:/<<RESOLVERDIR>>/apt_archive ./ InRelease
Get:2 copy:/<<RESOLVERDIR>>/apt_archive ./ Release [615 B]
Ign:3 copy:/<<RESOLVERDIR>>/apt_archive ./ Release.gpg
Get:4 copy:/<<RESOLVERDIR>>/apt_archive ./ Sources [1040 B]
Get:5 copy:/<<RESOLVERDIR>>/apt_archive ./ Packages [1013 B]
Fetched 2668 B in 0s (239 kB/s)
Reading package lists...
Get:1 file:/<<BUILDDIR>>/resolver-5Ng4Cj/apt_archive ./ InRelease
Ign:1 file:/<<BUILDDIR>>/resolver-5Ng4Cj/apt_archive ./ InRelease
Get:2 file:/<<BUILDDIR>>/resolver-5Ng4Cj/apt_archive ./ Release [606 B]
Get:2 file:/<<BUILDDIR>>/resolver-5Ng4Cj/apt_archive ./ Release [606 B]
Get:3 file:/<<BUILDDIR>>/resolver-5Ng4Cj/apt_archive ./ Release.gpg
Ign:3 file:/<<BUILDDIR>>/resolver-5Ng4Cj/apt_archive ./ Release.gpg
Reading package lists...
Reading package lists...
Install main build dependencies (apt-based resolver)
----------------------------------------------------
Installing build dependencies
Reading package lists...
Building dependency tree...
Reading state information...
The following additional packages will be installed:
autoconf automake autopoint autotools-dev build-essential cpp cpp-14
cpp-14-aarch64-linux-gnu cpp-aarch64-linux-gnu debhelper dh-autoreconf
dh-strip-nondeterminism dwz fakeroot g++ g++-14 g++-14-aarch64-linux-gnu
g++-aarch64-linux-gnu gcc gcc-14 gcc-14-aarch64-linux-gnu
gcc-aarch64-linux-gnu libasan8 libc-dev-bin libc6-dev libcc1-0
libcpan-changes-perl libcrypt-dev libdata-perl-perl libdebhelper-perl
libelf1t64 libexporter-tiny-perl libfakeroot libfile-slurp-perl
libfile-stripnondeterminism-perl libgcc-14-dev
libgetopt-long-descriptive-perl libhwasan0 libio-stringy-perl libisl23
libitm1 liblist-moreutils-perl liblist-moreutils-xs-perl liblsan0
libmoox-handlesvia-perl libmpc3 libmpfr6 libnamespace-autoclean-perl
libparams-validate-perl libstdc++-14-dev libsub-uplevel-perl
libtest-deep-perl libtest-exception-perl libtool libtsan2 libtype-tiny-perl
libubsan1 linux-libc-dev m4 po-debconf rpcsvc-proto
Suggested packages:
autoconf-archive gnu-standards autoconf-doc cpp-doc gcc-14-locales
cpp-14-doc dh-make gcc-14-doc gcc-multilib manpages-dev flex bison gdb
gcc-doc gdb-aarch64-linux-gnu libc-devtools glibc-doc libstdc++-14-doc
libtool-doc gfortran | fortran95-compiler gcj-jdk libdevel-lexalias-perl
m4-doc libmail-box-perl
Recommended packages:
manpages manpages-dev libarchive-cpio-perl libltdl-dev libref-util-perl
libtype-tiny-xs-perl libmail-sendmail-perl
The following NEW packages will be installed:
autoconf automake autopoint autotools-dev build-essential cpp cpp-14
cpp-14-aarch64-linux-gnu cpp-aarch64-linux-gnu debhelper dh-autoreconf
dh-strip-nondeterminism dwz fakeroot g++ g++-14 g++-14-aarch64-linux-gnu
g++-aarch64-linux-gnu gcc gcc-14 gcc-14-aarch64-linux-gnu
gcc-aarch64-linux-gnu libasan8 libc-dev-bin libc6-dev libcc1-0
libcpan-changes-perl libcrypt-dev libdata-perl-perl libdebhelper-perl
libelf1t64 libexporter-tiny-perl libfakeroot libfile-slurp-perl
libfile-stripnondeterminism-perl libgcc-14-dev
libgetopt-long-descriptive-perl libhwasan0 libio-stringy-perl libisl23
libitm1 liblist-moreutils-perl liblist-moreutils-xs-perl liblsan0
libmoox-handlesvia-perl libmpc3 libmpfr6 libnamespace-autoclean-perl
libparams-validate-perl libstdc++-14-dev libsub-uplevel-perl
libtest-deep-perl libtest-exception-perl libtool libtsan2 libtype-tiny-perl
libubsan1 linux-libc-dev m4 po-debconf rpcsvc-proto
sbuild-build-depends-main-dummy
0 upgraded, 62 newly installed, 0 to remove and 0 not upgraded.
Need to get 61.8 MB of archives.
After this operation, 240 MB of additional disk space will be used.
Get:1 copy:/<<RESOLVERDIR>>/apt_archive ./ sbuild-build-depends-main-dummy 0.invalid.0 [1040 B]
Get:2 http://deb.debian.org/debian sid/main arm64 m4 arm64 1.4.19-4 [277 kB]
Get:3 http://deb.debian.org/debian sid/main arm64 autoconf all 2.72-3 [493 kB]
Get:4 http://deb.debian.org/debian sid/main arm64 autotools-dev all 20220109.1 [51.6 kB]
Get:5 http://deb.debian.org/debian sid/main arm64 automake all 1:1.16.5-1.3 [823 kB]
Get:6 http://deb.debian.org/debian sid/main arm64 autopoint all 0.22.5-2 [723 kB]
Get:7 http://deb.debian.org/debian sid/main arm64 libc-dev-bin arm64 2.40-3 [50.9 kB]
Get:8 http://deb.debian.org/debian sid/main arm64 linux-libc-dev all 6.11.7-1 [2454 kB]
Get:9 http://deb.debian.org/debian sid/main arm64 libcrypt-dev arm64 1:4.4.36-5 [122 kB]
Get:10 http://deb.debian.org/debian sid/main arm64 rpcsvc-proto arm64 1.4.3-1+b1 [60.5 kB]
Get:11 http://deb.debian.org/debian sid/main arm64 libc6-dev arm64 2.40-3 [1591 kB]
Get:12 http://deb.debian.org/debian sid/main arm64 libisl23 arm64 0.27-1 [601 kB]
Get:13 http://deb.debian.org/debian sid/main arm64 libmpfr6 arm64 4.2.1-1+b2 [680 kB]
Get:14 http://deb.debian.org/debian sid/main arm64 libmpc3 arm64 1.3.1-1+b3 [50.5 kB]
Get:15 http://deb.debian.org/debian sid/main arm64 cpp-14-aarch64-linux-gnu arm64 14.2.0-8 [9166 kB]
Get:16 http://deb.debian.org/debian sid/main arm64 cpp-14 arm64 14.2.0-8 [1284 B]
Get:17 http://deb.debian.org/debian sid/main arm64 cpp-aarch64-linux-gnu arm64 4:14.2.0-1 [4832 B]
Get:18 http://deb.debian.org/debian sid/main arm64 cpp arm64 4:14.2.0-1 [1568 B]
Get:19 http://deb.debian.org/debian sid/main arm64 libcc1-0 arm64 14.2.0-8 [42.2 kB]
Get:20 http://deb.debian.org/debian sid/main arm64 libitm1 arm64 14.2.0-8 [24.2 kB]
Get:21 http://deb.debian.org/debian sid/main arm64 libasan8 arm64 14.2.0-8 [2579 kB]
Get:22 http://deb.debian.org/debian sid/main arm64 liblsan0 arm64 14.2.0-8 [1161 kB]
Get:23 http://deb.debian.org/debian sid/main arm64 libtsan2 arm64 14.2.0-8 [2386 kB]
Get:24 http://deb.debian.org/debian sid/main arm64 libubsan1 arm64 14.2.0-8 [1039 kB]
Get:25 http://deb.debian.org/debian sid/main arm64 libhwasan0 arm64 14.2.0-8 [1442 kB]
Get:26 http://deb.debian.org/debian sid/main arm64 libgcc-14-dev arm64 14.2.0-8 [2365 kB]
Get:27 http://deb.debian.org/debian sid/main arm64 gcc-14-aarch64-linux-gnu arm64 14.2.0-8 [17.7 MB]
Get:28 http://deb.debian.org/debian sid/main arm64 gcc-14 arm64 14.2.0-8 [519 kB]
Get:29 http://deb.debian.org/debian sid/main arm64 gcc-aarch64-linux-gnu arm64 4:14.2.0-1 [1440 B]
Get:30 http://deb.debian.org/debian sid/main arm64 gcc arm64 4:14.2.0-1 [5136 B]
Get:31 http://deb.debian.org/debian sid/main arm64 libstdc++-14-dev arm64 14.2.0-8 [2267 kB]
Get:32 http://deb.debian.org/debian sid/main arm64 g++-14-aarch64-linux-gnu arm64 14.2.0-8 [10.1 MB]
Get:33 http://deb.debian.org/debian sid/main arm64 g++-14 arm64 14.2.0-8 [20.2 kB]
Get:34 http://deb.debian.org/debian sid/main arm64 g++-aarch64-linux-gnu arm64 4:14.2.0-1 [1200 B]
Get:35 http://deb.debian.org/debian sid/main arm64 g++ arm64 4:14.2.0-1 [1332 B]
Get:36 http://deb.debian.org/debian sid/main arm64 build-essential arm64 12.12 [4624 B]
Get:37 http://deb.debian.org/debian sid/main arm64 libdebhelper-perl all 13.20 [89.7 kB]
Get:38 http://deb.debian.org/debian sid/main arm64 libtool all 2.4.7-8 [517 kB]
Get:39 http://deb.debian.org/debian sid/main arm64 dh-autoreconf all 20 [17.1 kB]
Get:40 http://deb.debian.org/debian sid/main arm64 libfile-stripnondeterminism-perl all 1.14.0-1 [19.5 kB]
Get:41 http://deb.debian.org/debian sid/main arm64 dh-strip-nondeterminism all 1.14.0-1 [8448 B]
Get:42 http://deb.debian.org/debian sid/main arm64 libelf1t64 arm64 0.192-4 [189 kB]
Get:43 http://deb.debian.org/debian sid/main arm64 dwz arm64 0.15-1+b1 [102 kB]
Get:44 http://deb.debian.org/debian sid/main arm64 po-debconf all 1.0.21+nmu1 [248 kB]
Get:45 http://deb.debian.org/debian sid/main arm64 debhelper all 13.20 [915 kB]
Get:46 http://deb.debian.org/debian sid/main arm64 libfakeroot arm64 1.36-1 [29.1 kB]
Get:47 http://deb.debian.org/debian sid/main arm64 fakeroot arm64 1.36-1 [74.4 kB]
Get:48 http://deb.debian.org/debian sid/main arm64 libexporter-tiny-perl all 1.006002-1 [38.7 kB]
Get:49 http://deb.debian.org/debian sid/main arm64 libtype-tiny-perl all 2.004000-1 [357 kB]
Get:50 http://deb.debian.org/debian sid/main arm64 libcpan-changes-perl all 0.500004-1 [31.9 kB]
Get:51 http://deb.debian.org/debian sid/main arm64 liblist-moreutils-xs-perl arm64 0.430-4+b2 [37.7 kB]
Get:52 http://deb.debian.org/debian sid/main arm64 liblist-moreutils-perl all 0.430-2 [46.9 kB]
Get:53 http://deb.debian.org/debian sid/main arm64 libdata-perl-perl all 0.002011-2 [40.8 kB]
Get:54 http://deb.debian.org/debian sid/main arm64 libfile-slurp-perl all 9999.32-2 [26.7 kB]
Get:55 http://deb.debian.org/debian sid/main arm64 libio-stringy-perl all 2.113-2 [48.3 kB]
Get:56 http://deb.debian.org/debian sid/main arm64 libparams-validate-perl arm64 1.31-2+b3 [60.8 kB]
Get:57 http://deb.debian.org/debian sid/main arm64 libgetopt-long-descriptive-perl all 0.115-1 [27.6 kB]
Get:58 http://deb.debian.org/debian sid/main arm64 libmoox-handlesvia-perl all 0.001009-2 [18.4 kB]
Get:59 http://deb.debian.org/debian sid/main arm64 libnamespace-autoclean-perl all 0.31-1 [13.8 kB]
Get:60 http://deb.debian.org/debian sid/main arm64 libsub-uplevel-perl all 0.2800-3 [14.0 kB]
Get:61 http://deb.debian.org/debian sid/main arm64 libtest-deep-perl all 1.204-1 [52.9 kB]
Get:62 http://deb.debian.org/debian sid/main arm64 libtest-exception-perl all 0.43-3 [16.9 kB]
debconf: delaying package configuration, since apt-utils is not installed
Fetched 61.8 MB in 1s (98.6 MB/s)
Selecting previously unselected package m4.
(Reading database ... 17119 files and directories currently installed.)
Preparing to unpack .../00-m4_1.4.19-4_arm64.deb ...
Unpacking m4 (1.4.19-4) ...
Selecting previously unselected package autoconf.
Preparing to unpack .../01-autoconf_2.72-3_all.deb ...
Unpacking autoconf (2.72-3) ...
Selecting previously unselected package autotools-dev.
Preparing to unpack .../02-autotools-dev_20220109.1_all.deb ...
Unpacking autotools-dev (20220109.1) ...
Selecting previously unselected package automake.
Preparing to unpack .../03-automake_1%3a1.16.5-1.3_all.deb ...
Unpacking automake (1:1.16.5-1.3) ...
Selecting previously unselected package autopoint.
Preparing to unpack .../04-autopoint_0.22.5-2_all.deb ...
Unpacking autopoint (0.22.5-2) ...
Selecting previously unselected package libc-dev-bin.
Preparing to unpack .../05-libc-dev-bin_2.40-3_arm64.deb ...
Unpacking libc-dev-bin (2.40-3) ...
Selecting previously unselected package linux-libc-dev.
Preparing to unpack .../06-linux-libc-dev_6.11.7-1_all.deb ...
Unpacking linux-libc-dev (6.11.7-1) ...
Selecting previously unselected package libcrypt-dev:arm64.
Preparing to unpack .../07-libcrypt-dev_1%3a4.4.36-5_arm64.deb ...
Unpacking libcrypt-dev:arm64 (1:4.4.36-5) ...
Selecting previously unselected package rpcsvc-proto.
Preparing to unpack .../08-rpcsvc-proto_1.4.3-1+b1_arm64.deb ...
Unpacking rpcsvc-proto (1.4.3-1+b1) ...
Selecting previously unselected package libc6-dev:arm64.
Preparing to unpack .../09-libc6-dev_2.40-3_arm64.deb ...
Unpacking libc6-dev:arm64 (2.40-3) ...
Selecting previously unselected package libisl23:arm64.
Preparing to unpack .../10-libisl23_0.27-1_arm64.deb ...
Unpacking libisl23:arm64 (0.27-1) ...
Selecting previously unselected package libmpfr6:arm64.
Preparing to unpack .../11-libmpfr6_4.2.1-1+b2_arm64.deb ...
Unpacking libmpfr6:arm64 (4.2.1-1+b2) ...
Selecting previously unselected package libmpc3:arm64.
Preparing to unpack .../12-libmpc3_1.3.1-1+b3_arm64.deb ...
Unpacking libmpc3:arm64 (1.3.1-1+b3) ...
Selecting previously unselected package cpp-14-aarch64-linux-gnu.
Preparing to unpack .../13-cpp-14-aarch64-linux-gnu_14.2.0-8_arm64.deb ...
Unpacking cpp-14-aarch64-linux-gnu (14.2.0-8) ...
Selecting previously unselected package cpp-14.
Preparing to unpack .../14-cpp-14_14.2.0-8_arm64.deb ...
Unpacking cpp-14 (14.2.0-8) ...
Selecting previously unselected package cpp-aarch64-linux-gnu.
Preparing to unpack .../15-cpp-aarch64-linux-gnu_4%3a14.2.0-1_arm64.deb ...
Unpacking cpp-aarch64-linux-gnu (4:14.2.0-1) ...
Selecting previously unselected package cpp.
Preparing to unpack .../16-cpp_4%3a14.2.0-1_arm64.deb ...
Unpacking cpp (4:14.2.0-1) ...
Selecting previously unselected package libcc1-0:arm64.
Preparing to unpack .../17-libcc1-0_14.2.0-8_arm64.deb ...
Unpacking libcc1-0:arm64 (14.2.0-8) ...
Selecting previously unselected package libitm1:arm64.
Preparing to unpack .../18-libitm1_14.2.0-8_arm64.deb ...
Unpacking libitm1:arm64 (14.2.0-8) ...
Selecting previously unselected package libasan8:arm64.
Preparing to unpack .../19-libasan8_14.2.0-8_arm64.deb ...
Unpacking libasan8:arm64 (14.2.0-8) ...
Selecting previously unselected package liblsan0:arm64.
Preparing to unpack .../20-liblsan0_14.2.0-8_arm64.deb ...
Unpacking liblsan0:arm64 (14.2.0-8) ...
Selecting previously unselected package libtsan2:arm64.
Preparing to unpack .../21-libtsan2_14.2.0-8_arm64.deb ...
Unpacking libtsan2:arm64 (14.2.0-8) ...
Selecting previously unselected package libubsan1:arm64.
Preparing to unpack .../22-libubsan1_14.2.0-8_arm64.deb ...
Unpacking libubsan1:arm64 (14.2.0-8) ...
Selecting previously unselected package libhwasan0:arm64.
Preparing to unpack .../23-libhwasan0_14.2.0-8_arm64.deb ...
Unpacking libhwasan0:arm64 (14.2.0-8) ...
Selecting previously unselected package libgcc-14-dev:arm64.
Preparing to unpack .../24-libgcc-14-dev_14.2.0-8_arm64.deb ...
Unpacking libgcc-14-dev:arm64 (14.2.0-8) ...
Selecting previously unselected package gcc-14-aarch64-linux-gnu.
Preparing to unpack .../25-gcc-14-aarch64-linux-gnu_14.2.0-8_arm64.deb ...
Unpacking gcc-14-aarch64-linux-gnu (14.2.0-8) ...
Selecting previously unselected package gcc-14.
Preparing to unpack .../26-gcc-14_14.2.0-8_arm64.deb ...
Unpacking gcc-14 (14.2.0-8) ...
Selecting previously unselected package gcc-aarch64-linux-gnu.
Preparing to unpack .../27-gcc-aarch64-linux-gnu_4%3a14.2.0-1_arm64.deb ...
Unpacking gcc-aarch64-linux-gnu (4:14.2.0-1) ...
Selecting previously unselected package gcc.
Preparing to unpack .../28-gcc_4%3a14.2.0-1_arm64.deb ...
Unpacking gcc (4:14.2.0-1) ...
Selecting previously unselected package libstdc++-14-dev:arm64.
Preparing to unpack .../29-libstdc++-14-dev_14.2.0-8_arm64.deb ...
Unpacking libstdc++-14-dev:arm64 (14.2.0-8) ...
Selecting previously unselected package g++-14-aarch64-linux-gnu.
Preparing to unpack .../30-g++-14-aarch64-linux-gnu_14.2.0-8_arm64.deb ...
Unpacking g++-14-aarch64-linux-gnu (14.2.0-8) ...
Selecting previously unselected package g++-14.
Preparing to unpack .../31-g++-14_14.2.0-8_arm64.deb ...
Unpacking g++-14 (14.2.0-8) ...
Selecting previously unselected package g++-aarch64-linux-gnu.
Preparing to unpack .../32-g++-aarch64-linux-gnu_4%3a14.2.0-1_arm64.deb ...
Unpacking g++-aarch64-linux-gnu (4:14.2.0-1) ...
Selecting previously unselected package g++.
Preparing to unpack .../33-g++_4%3a14.2.0-1_arm64.deb ...
Unpacking g++ (4:14.2.0-1) ...
Selecting previously unselected package build-essential.
Preparing to unpack .../34-build-essential_12.12_arm64.deb ...
Unpacking build-essential (12.12) ...
Selecting previously unselected package libdebhelper-perl.
Preparing to unpack .../35-libdebhelper-perl_13.20_all.deb ...
Unpacking libdebhelper-perl (13.20) ...
Selecting previously unselected package libtool.
Preparing to unpack .../36-libtool_2.4.7-8_all.deb ...
Unpacking libtool (2.4.7-8) ...
Selecting previously unselected package dh-autoreconf.
Preparing to unpack .../37-dh-autoreconf_20_all.deb ...
Unpacking dh-autoreconf (20) ...
Selecting previously unselected package libfile-stripnondeterminism-perl.
Preparing to unpack .../38-libfile-stripnondeterminism-perl_1.14.0-1_all.deb ...
Unpacking libfile-stripnondeterminism-perl (1.14.0-1) ...
Selecting previously unselected package dh-strip-nondeterminism.
Preparing to unpack .../39-dh-strip-nondeterminism_1.14.0-1_all.deb ...
Unpacking dh-strip-nondeterminism (1.14.0-1) ...
Selecting previously unselected package libelf1t64:arm64.
Preparing to unpack .../40-libelf1t64_0.192-4_arm64.deb ...
Unpacking libelf1t64:arm64 (0.192-4) ...
Selecting previously unselected package dwz.
Preparing to unpack .../41-dwz_0.15-1+b1_arm64.deb ...
Unpacking dwz (0.15-1+b1) ...
Selecting previously unselected package po-debconf.
Preparing to unpack .../42-po-debconf_1.0.21+nmu1_all.deb ...
Unpacking po-debconf (1.0.21+nmu1) ...
Selecting previously unselected package debhelper.
Preparing to unpack .../43-debhelper_13.20_all.deb ...
Unpacking debhelper (13.20) ...
Selecting previously unselected package libfakeroot:arm64.
Preparing to unpack .../44-libfakeroot_1.36-1_arm64.deb ...
Unpacking libfakeroot:arm64 (1.36-1) ...
Selecting previously unselected package fakeroot.
Preparing to unpack .../45-fakeroot_1.36-1_arm64.deb ...
Unpacking fakeroot (1.36-1) ...
Selecting previously unselected package libexporter-tiny-perl.
Preparing to unpack .../46-libexporter-tiny-perl_1.006002-1_all.deb ...
Unpacking libexporter-tiny-perl (1.006002-1) ...
Selecting previously unselected package libtype-tiny-perl.
Preparing to unpack .../47-libtype-tiny-perl_2.004000-1_all.deb ...
Unpacking libtype-tiny-perl (2.004000-1) ...
Selecting previously unselected package libcpan-changes-perl.
Preparing to unpack .../48-libcpan-changes-perl_0.500004-1_all.deb ...
Unpacking libcpan-changes-perl (0.500004-1) ...
Selecting previously unselected package liblist-moreutils-xs-perl.
Preparing to unpack .../49-liblist-moreutils-xs-perl_0.430-4+b2_arm64.deb ...
Unpacking liblist-moreutils-xs-perl (0.430-4+b2) ...
Selecting previously unselected package liblist-moreutils-perl.
Preparing to unpack .../50-liblist-moreutils-perl_0.430-2_all.deb ...
Unpacking liblist-moreutils-perl (0.430-2) ...
Selecting previously unselected package libdata-perl-perl.
Preparing to unpack .../51-libdata-perl-perl_0.002011-2_all.deb ...
Unpacking libdata-perl-perl (0.002011-2) ...
Selecting previously unselected package libfile-slurp-perl.
Preparing to unpack .../52-libfile-slurp-perl_9999.32-2_all.deb ...
Unpacking libfile-slurp-perl (9999.32-2) ...
Selecting previously unselected package libio-stringy-perl.
Preparing to unpack .../53-libio-stringy-perl_2.113-2_all.deb ...
Unpacking libio-stringy-perl (2.113-2) ...
Selecting previously unselected package libparams-validate-perl:arm64.
Preparing to unpack .../54-libparams-validate-perl_1.31-2+b3_arm64.deb ...
Unpacking libparams-validate-perl:arm64 (1.31-2+b3) ...
Selecting previously unselected package libgetopt-long-descriptive-perl.
Preparing to unpack .../55-libgetopt-long-descriptive-perl_0.115-1_all.deb ...
Unpacking libgetopt-long-descriptive-perl (0.115-1) ...
Selecting previously unselected package libmoox-handlesvia-perl.
Preparing to unpack .../56-libmoox-handlesvia-perl_0.001009-2_all.deb ...
Unpacking libmoox-handlesvia-perl (0.001009-2) ...
Selecting previously unselected package libnamespace-autoclean-perl.
Preparing to unpack .../57-libnamespace-autoclean-perl_0.31-1_all.deb ...
Unpacking libnamespace-autoclean-perl (0.31-1) ...
Selecting previously unselected package libsub-uplevel-perl.
Preparing to unpack .../58-libsub-uplevel-perl_0.2800-3_all.deb ...
Unpacking libsub-uplevel-perl (0.2800-3) ...
Selecting previously unselected package libtest-deep-perl.
Preparing to unpack .../59-libtest-deep-perl_1.204-1_all.deb ...
Unpacking libtest-deep-perl (1.204-1) ...
Selecting previously unselected package libtest-exception-perl.
Preparing to unpack .../60-libtest-exception-perl_0.43-3_all.deb ...
Unpacking libtest-exception-perl (0.43-3) ...
Selecting previously unselected package sbuild-build-depends-main-dummy.
Preparing to unpack .../61-sbuild-build-depends-main-dummy_0.invalid.0_arm64.deb ...
Unpacking sbuild-build-depends-main-dummy (0.invalid.0) ...
Setting up libfile-stripnondeterminism-perl (1.14.0-1) ...
Setting up libfile-slurp-perl (9999.32-2) ...
Setting up libtest-deep-perl (1.204-1) ...
Setting up libio-stringy-perl (2.113-2) ...
Setting up po-debconf (1.0.21+nmu1) ...
Setting up libdebhelper-perl (13.20) ...
Setting up linux-libc-dev (6.11.7-1) ...
Setting up m4 (1.4.19-4) ...
Setting up libfakeroot:arm64 (1.36-1) ...
Setting up libelf1t64:arm64 (0.192-4) ...
Setting up fakeroot (1.36-1) ...
update-alternatives: using /usr/bin/fakeroot-sysv to provide /usr/bin/fakeroot (fakeroot) in auto mode
Setting up autotools-dev (20220109.1) ...
Setting up rpcsvc-proto (1.4.3-1+b1) ...
Setting up libmpfr6:arm64 (4.2.1-1+b2) ...
Setting up libmpc3:arm64 (1.3.1-1+b3) ...
Setting up autopoint (0.22.5-2) ...
Setting up liblist-moreutils-xs-perl (0.430-4+b2) ...
Setting up autoconf (2.72-3) ...
Setting up libubsan1:arm64 (14.2.0-8) ...
Setting up dh-strip-nondeterminism (1.14.0-1) ...
Setting up dwz (0.15-1+b1) ...
Setting up libhwasan0:arm64 (14.2.0-8) ...
Setting up libcrypt-dev:arm64 (1:4.4.36-5) ...
Setting up libasan8:arm64 (14.2.0-8) ...
Setting up libsub-uplevel-perl (0.2800-3) ...
Setting up libtsan2:arm64 (14.2.0-8) ...
Setting up libexporter-tiny-perl (1.006002-1) ...
Setting up libisl23:arm64 (0.27-1) ...
Setting up libnamespace-autoclean-perl (0.31-1) ...
Setting up libc-dev-bin (2.40-3) ...
Setting up libparams-validate-perl:arm64 (1.31-2+b3) ...
Setting up libcc1-0:arm64 (14.2.0-8) ...
Setting up liblsan0:arm64 (14.2.0-8) ...
Setting up libitm1:arm64 (14.2.0-8) ...
Setting up automake (1:1.16.5-1.3) ...
update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode
Setting up liblist-moreutils-perl (0.430-2) ...
Setting up libtype-tiny-perl (2.004000-1) ...
Setting up libdata-perl-perl (0.002011-2) ...
Setting up libcpan-changes-perl (0.500004-1) ...
Setting up libtest-exception-perl (0.43-3) ...
Setting up libgetopt-long-descriptive-perl (0.115-1) ...
Setting up cpp-14-aarch64-linux-gnu (14.2.0-8) ...
Setting up libc6-dev:arm64 (2.40-3) ...
Setting up libgcc-14-dev:arm64 (14.2.0-8) ...
Setting up libstdc++-14-dev:arm64 (14.2.0-8) ...
Setting up libmoox-handlesvia-perl (0.001009-2) ...
Setting up cpp-aarch64-linux-gnu (4:14.2.0-1) ...
Setting up cpp-14 (14.2.0-8) ...
Setting up cpp (4:14.2.0-1) ...
Setting up gcc-14-aarch64-linux-gnu (14.2.0-8) ...
Setting up gcc-aarch64-linux-gnu (4:14.2.0-1) ...
Setting up g++-14-aarch64-linux-gnu (14.2.0-8) ...
Setting up gcc-14 (14.2.0-8) ...
Setting up g++-aarch64-linux-gnu (4:14.2.0-1) ...
Setting up g++-14 (14.2.0-8) ...
Setting up libtool (2.4.7-8) ...
Setting up gcc (4:14.2.0-1) ...
Setting up dh-autoreconf (20) ...
Setting up g++ (4:14.2.0-1) ...
update-alternatives: using /usr/bin/g++ to provide /usr/bin/c++ (c++) in auto mode
Setting up build-essential (12.12) ...
Setting up debhelper (13.20) ...
Setting up sbuild-build-depends-main-dummy (0.invalid.0) ...
Processing triggers for man-db (2.13.0-1) ...
Processing triggers for libc-bin (2.40-3) ...
+------------------------------------------------------------------------------+
| Check architectures |
+------------------------------------------------------------------------------+
Arch check ok (arm64 included in all)
+------------------------------------------------------------------------------+
| Build environment |
+------------------------------------------------------------------------------+
Kernel: Linux 6.1.0-27-cloud-arm64 #1 SMP Debian 6.1.115-1 (2024-11-01) arm64 (aarch64)
Toolchain package versions: binutils_2.43.1-5 dpkg-dev_1.22.12~1.gbp82cafd g++-14_14.2.0-8 gcc-14_14.2.0-8 libc6-dev_2.40-3 libstdc++-14-dev_14.2.0-8 libstdc++6_14.2.0-8 linux-libc-dev_6.11.7-1
Package versions: appstream_1.0.3-1+b1 apt_2.9.11 autoconf_2.72-3 automake_1:1.16.5-1.3 autopoint_0.22.5-2 autotools-dev_20220109.1 base-files_13.5 base-passwd_3.6.5 bash_5.2.32-1+b2 binutils_2.43.1-5 binutils-aarch64-linux-gnu_2.43.1-5 binutils-common_2.43.1-5 bsdextrautils_2.40.2-11 bsdutils_1:2.40.2-11 build-essential_12.12 bzip2_1.0.8-6 ca-certificates_20240203 coreutils_9.5-1+b1 cpp_4:14.2.0-1 cpp-14_14.2.0-8 cpp-14-aarch64-linux-gnu_14.2.0-8 cpp-aarch64-linux-gnu_4:14.2.0-1 dash_0.5.12-9+b1 debconf_1.5.87 debhelper_13.20 debian-archive-keyring_2023.4 debianutils_5.21 dh-autoreconf_20 dh-strip-nondeterminism_1.14.0-1 diffstat_1.66-1+b1 diffutils_1:3.10-1+b1 dpkg_1.22.12~1.gbp82cafd dpkg-dev_1.22.12~1.gbp82cafd dwz_0.15-1+b1 e2fsprogs_1.47.1-1+b1 fakeroot_1.36-1 file_1:5.45-3+b1 findutils_4.10.0-3 g++_4:14.2.0-1 g++-14_14.2.0-8 g++-14-aarch64-linux-gnu_14.2.0-8 g++-aarch64-linux-gnu_4:14.2.0-1 gcc_4:14.2.0-1 gcc-14_14.2.0-8 gcc-14-aarch64-linux-gnu_14.2.0-8 gcc-14-base_14.2.0-8 gcc-aarch64-linux-gnu_4:14.2.0-1 gettext_0.22.5-2 gettext-base_0.22.5-2 gpg_2.2.45-2 gpgconf_2.2.45-2 gpgv_2.2.45-2 grep_3.11-4+b1 groff-base_1.23.0-5 gzip_1.12-1.1+b1 hostname_3.25 init-system-helpers_1.67 intltool-debian_0.35.0+20060710.6 iso-codes_4.17.0-1 libacl1_2.3.2-2+b1 libaliased-perl_0.34-3 libappstream5_1.0.3-1+b1 libapt-pkg-perl_0.1.40+b6 libapt-pkg6.0t64_2.9.11 libarchive-zip-perl_1.68-1 libasan8_14.2.0-8 libassuan9_3.0.1-2 libatomic1_14.2.0-8 libattr1_1:2.5.2-2 libaudit-common_1:4.0.2-2 libaudit1_1:4.0.2-2 libb-hooks-endofscope-perl_0.28-1 libb-hooks-op-check-perl_0.22-3+b2 libberkeleydb-perl_0.66-1 libbinutils_2.43.1-5 libblkid1_2.40.2-11 libbrotli1_1.1.0-2+b6 libbsd0_0.12.2-2 libbz2-1.0_1.0.8-6 libc-bin_2.40-3 libc-dev-bin_2.40-3 libc6_2.40-3 libc6-dev_2.40-3 libcap-ng0_0.8.5-3+b1 libcap2_1:2.66-5+b1 libcapture-tiny-perl_0.48-2 libcc1-0_14.2.0-8 libcgi-pm-perl_4.66-1 libclass-data-inheritable-perl_0.10-1 libclass-inspector-perl_1.36-3 libclass-method-modifiers-perl_2.15-1 libclass-xsaccessor-perl_1.19-4+b4 libclone-perl_0.47-1+b1 libcom-err2_1.47.1-1+b1 libconfig-tiny-perl_2.30-1 libconst-fast-perl_0.014-2 libcpan-changes-perl_0.500004-1 libcpanel-json-xs-perl_4.38-1+b1 libcrypt-dev_1:4.4.36-5 libcrypt1_1:4.4.36-5 libctf-nobfd0_2.43.1-5 libctf0_2.43.1-5 libcurl3t64-gnutls_8.11.0-1 libdata-dpath-perl_0.60-1 libdata-messagepack-perl_1.02-1+b4 libdata-optlist-perl_0.114-1 libdata-perl-perl_0.002011-2 libdata-validate-domain-perl_0.15-1 libdata-validate-ip-perl_0.31-1 libdata-validate-uri-perl_0.07-3 libdb5.3t64_5.3.28+dfsg2-9 libdebconfclient0_0.273 libdebhelper-perl_13.20 libdevel-callchecker-perl_0.009-1+b1 libdevel-size-perl_0.84-1+b1 libdevel-stacktrace-perl_2.0500-1 libdpkg-perl_1.22.12~1.gbp82cafd libdynaloader-functions-perl_0.004-1 libelf1t64_0.192-4 libemail-address-xs-perl_1.05-1+b4 libencode-locale-perl_1.05-3 libexception-class-perl_1.45-1 libexporter-tiny-perl_1.006002-1 libext2fs2t64_1.47.1-1+b1 libfakeroot_1.36-1 libffi8_3.4.6-1 libfile-basedir-perl_0.09-2 libfile-find-rule-perl_0.34-3 libfile-listing-perl_6.16-1 libfile-sharedir-perl_1.118-3 libfile-slurp-perl_9999.32-2 libfile-stripnondeterminism-perl_1.14.0-1 libfont-ttf-perl_1.06-2 libgcc-14-dev_14.2.0-8 libgcc-s1_14.2.0-8 libgcrypt20_1.11.0-6 libgdbm-compat4t64_1.24-2 libgdbm6t64_1.24-2 libgetopt-long-descriptive-perl_0.115-1 libglib2.0-0t64_2.82.2-3 libgmp10_2:6.3.0+dfsg-2+b2 libgnutls30t64_3.8.8-2 libgomp1_14.2.0-8 libgpg-error0_1.50-4 libgprofng0_2.43.1-5 libgssapi-krb5-2_1.21.3-3 libhogweed6t64_3.10-1+b1 libhtml-form-perl_6.12-1 libhtml-html5-entities-perl_0.004-3 libhtml-parser-perl_3.83-1+b1 libhtml-tagset-perl_3.24-1 libhtml-tokeparser-simple-perl_3.16-4 libhtml-tree-perl_5.07-3 libhttp-cookies-perl_6.11-1 libhttp-date-perl_6.06-1 libhttp-message-perl_7.00-2 libhttp-negotiate-perl_6.01-2 libhwasan0_14.2.0-8 libicu72_72.1-5+b1 libidn2-0_2.3.7-2+b1 libimport-into-perl_1.002005-2 libio-html-perl_1.004-3 libio-interactive-perl_1.025-1 libio-socket-ssl-perl_2.089-1 libio-string-perl_1.08-4 libio-stringy-perl_2.113-2 libipc-run3-perl_0.049-1 libipc-system-simple-perl_1.30-2 libisl23_0.27-1 libiterator-perl_0.03+ds1-2 libiterator-util-perl_0.02+ds1-2 libitm1_14.2.0-8 libjansson4_2.14-2+b3 libjson-maybexs-perl_1.004008-1 libk5crypto3_1.21.3-3 libkeyutils1_1.6.3-4 libkrb5-3_1.21.3-3 libkrb5support0_1.21.3-3 libldap-2.5-0_2.5.18+dfsg-3+b1 liblist-compare-perl_0.55-2 liblist-moreutils-perl_0.430-2 liblist-moreutils-xs-perl_0.430-4+b2 liblist-someutils-perl_0.59-1 liblist-utilsby-perl_0.12-2 liblsan0_14.2.0-8 liblwp-mediatypes-perl_6.04-2 liblwp-protocol-https-perl_6.14-1 liblz1_1.15~pre2-1 liblz4-1_1.9.4-3+b1 liblzma5_5.6.3-1+b1 liblzo2-2_2.10-3+b1 libmagic-mgc_1:5.45-3+b1 libmagic1t64_1:5.45-3+b1 libmarkdown2_2.2.7-2.1 libmd0_1.1.0-2+b1 libmldbm-perl_2.05-4 libmodule-implementation-perl_0.09-2 libmodule-runtime-perl_0.016-2 libmoo-perl_2.005005-1 libmoox-aliases-perl_0.001006-2 libmoox-handlesvia-perl_0.001009-2 libmount1_2.40.2-11 libmouse-perl_2.5.11-1+b1 libmpc3_1.3.1-1+b3 libmpfr6_4.2.1-1+b2 libnamespace-autoclean-perl_0.31-1 libnamespace-clean-perl_0.27-2 libnet-domain-tld-perl_1.75-4 libnet-http-perl_6.23-1 libnet-ipv6addr-perl_1.02-1 libnet-netmask-perl_2.0002-2 libnet-ssleay-perl_1.94-2 libnetaddr-ip-perl_4.079+dfsg-2+b4 libnettle8t64_3.10-1+b1 libnghttp2-14_1.64.0-1 libnghttp3-9_1.4.0-1+b1 libngtcp2-16_1.6.0-1 libngtcp2-crypto-gnutls8_1.6.0-1 libnumber-compare-perl_0.03-3 libp11-kit0_0.25.5-2+b1 libpackage-stash-perl_0.40-1 libpam-modules_1.5.3-7+b1 libpam-modules-bin_1.5.3-7+b1 libpam-runtime_1.5.3-7 libpam0g_1.5.3-7+b1 libparams-classify-perl_0.015-2+b4 libparams-util-perl_1.102-3+b1 libparams-validate-perl_1.31-2+b3 libpath-tiny-perl_0.146-1 libpcre2-8-0_10.44-4 libperl5.40_5.40.0-7 libperlio-gzip-perl_0.20-1+b4 libperlio-utf8-strict-perl_0.010-1+b3 libpipeline1_1.5.8-1 libproc-processtable-perl_0.636-1+b3 libpsl5t64_0.21.2-1.1+b1 libreadline8t64_8.2-5 libregexp-wildcards-perl_1.05-3 librole-tiny-perl_2.002004-1 librtmp1_2.4+20151223.gitfa8646d.1-2+b5 libsasl2-2_2.1.28+dfsg1-8 libsasl2-modules-db_2.1.28+dfsg1-8 libseccomp2_2.5.5-1+b3 libselinux1_3.7-3+b1 libsemanage-common_3.7-2 libsemanage2_3.7-2+b1 libsepol2_3.7-1 libsereal-decoder-perl_5.004+ds-1+b3 libsereal-encoder-perl_5.004+ds-1+b3 libsframe1_2.43.1-5 libsmartcols1_2.40.2-11 libsort-versions-perl_1.62-3 libsqlite3-0_3.46.1-1 libss2_1.47.1-1+b1 libssh2-1t64_1.11.1-1 libssl3t64_3.3.2-2 libstdc++-14-dev_14.2.0-8 libstdc++6_14.2.0-8 libstemmer0d_2.2.0-4+b2 libstrictures-perl_2.000006-1 libsub-exporter-perl_0.990-1 libsub-exporter-progressive-perl_0.001013-3 libsub-identify-perl_0.14-3+b3 libsub-install-perl_0.929-1 libsub-name-perl_0.27-1+b3 libsub-quote-perl_2.006008-1 libsub-uplevel-perl_0.2800-3 libsyntax-keyword-try-perl_0.30-1+b1 libsystemd0_257~rc2-3 libtasn1-6_4.19.0-3+b3 libterm-readkey-perl_2.38-2+b4 libtest-deep-perl_1.204-1 libtest-exception-perl_0.43-3 libtext-glob-perl_0.11-3 libtext-levenshteinxs-perl_0.03-5+b4 libtext-markdown-discount-perl_0.16-1+b3 libtext-xslate-perl_3.5.9-2+b1 libtime-duration-perl_1.21-2 libtime-moment-perl_0.44-2+b4 libtimedate-perl_2.3300-2 libtinfo6_6.5-2+b1 libtool_2.4.7-8 libtry-tiny-perl_0.32-1 libtsan2_14.2.0-8 libtype-tiny-perl_2.004000-1 libubsan1_14.2.0-8 libuchardet0_0.0.8-1+b2 libudev1_257~rc2-3 libunicode-utf8-perl_0.62-2+b3 libunistring5_1.2-1+b1 liburi-perl_5.30-1 libuuid1_2.40.2-11 libvariable-magic-perl_0.64-1+b1 libwww-mechanize-perl_2.19-1 libwww-perl_6.77-1 libwww-robotrules-perl_6.02-1 libxml-libxml-perl_2.0207+dfsg+really+2.0134-5+b1 libxml-namespacesupport-perl_1.12-2 libxml-sax-base-perl_1.09-3 libxml-sax-perl_1.02+dfsg-3 libxml2_2.12.7+dfsg+really2.9.14-0.2+b1 libxmlb2_0.3.21-1 libxs-parse-keyword-perl_0.46-1+b1 libxxhash0_0.8.2-2+b2 libyaml-0-2_0.2.5-1+b2 libyaml-libyaml-perl_0.902.0+ds-2+b1 libzstd1_1.5.6+dfsg-1+b1 lintian_2.120.0 linux-libc-dev_6.11.7-1 login_1:4.16.0-2+really2.40.2-11 login.defs_1:4.16.0-5 logsave_1.47.1-1+b1 lzop_1.04-2+b1 m4_1.4.19-4 make_4.3-4.1+b1 man-db_2.13.0-1 mawk_1.3.4.20240905-1 mount_2.40.2-11 ncurses-base_6.5-2 ncurses-bin_6.5-2+b1 netbase_6.4 openssl_3.3.2-2 openssl-provider-legacy_3.3.2-2 passwd_1:4.16.0-5 patch_2.7.6-7+b1 patchutils_0.4.2-1+b1 perl_5.40.0-7 perl-base_5.40.0-7 perl-modules-5.40_5.40.0-7 perl-openssl-defaults_7+b2 plzip_1.11-2 po-debconf_1.0.21+nmu1 readline-common_8.2-5 rpcsvc-proto_1.4.3-1+b1 sbuild-build-depends-main-dummy_0.invalid.0 sed_4.9-2+b1 sensible-utils_0.0.24 shared-mime-info_2.4-5+b1 sysvinit-utils_3.11-1 t1utils_1.41-4+b1 tar_1.35+dfsg-3+b1 tzdata_2024b-3 ucf_3.0043+nmu1 unzip_6.0-28+b1 util-linux_2.40.2-11 xz-utils_5.6.3-1+b1 zlib1g_1:1.3.dfsg+really1.3.1-1+b1
+------------------------------------------------------------------------------+
| Build |
+------------------------------------------------------------------------------+
Unpack source
-------------
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA512
Format: 3.0 (quilt)
Source: libpod-readme-perl
Binary: libpod-readme-perl
Architecture: all
Version: 1.2.3-1
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Uploaders: Ansgar Burchardt <ansgar@debian.org>
Homepage: https://metacpan.org/release/Pod-Readme
Standards-Version: 4.2.1
Vcs-Browser: https://salsa.debian.org/perl-team/modules/packages/libpod-readme-perl
Vcs-Git: https://salsa.debian.org/perl-team/modules/packages/libpod-readme-perl.git
Testsuite: autopkgtest-pkg-perl
Build-Depends: debhelper (>= 10)
Build-Depends-Indep: libclass-method-modifiers-perl (>= 2.00), libcpan-changes-perl (>= 0.30), libfile-slurp-perl, libgetopt-long-descriptive-perl, libio-string-perl, libmoo-perl (>= 1.004005), libmoox-handlesvia-perl, libnamespace-autoclean-perl, libpath-tiny-perl, librole-tiny-perl, libtest-deep-perl, libtest-exception-perl, libtry-tiny-perl, libtype-tiny-perl, perl, perl (>= 5.19.5) | libscalar-list-utils-perl (>= 1:1.33)
Package-List:
libpod-readme-perl deb perl optional arch=all
Checksums-Sha1:
ef8f6cbc9c8a43dc4ce2ec451215820142fc4aa6 37001 libpod-readme-perl_1.2.3.orig.tar.gz
cc43d594ae0ca2a2090796654106db6de6d0e284 3340 libpod-readme-perl_1.2.3-1.debian.tar.xz
Checksums-Sha256:
d379f98976ebe5225d768ccb3a760e9b5673eb3f3d8ae8f57430ed9513f22857 37001 libpod-readme-perl_1.2.3.orig.tar.gz
3b4af33e32f5591d62ff517613e348cc7d21638b2cc165b1298239165bdbfef5 3340 libpod-readme-perl_1.2.3-1.debian.tar.xz
Files:
116d264f9224db2dab10a40af1e984eb 37001 libpod-readme-perl_1.2.3.orig.tar.gz
129a1c05c6146f5b5107afdd35b5b13d 3340 libpod-readme-perl_1.2.3-1.debian.tar.xz
-----BEGIN PGP SIGNATURE-----
iQKTBAEBCgB9FiEE0eExbpOnYKgQTYX6uzpoAYZJqgYFAlv8QZtfFIAAAAAALgAo
aXNzdWVyLWZwckBub3RhdGlvbnMub3BlbnBncC5maWZ0aGhvcnNlbWFuLm5ldEQx
RTEzMTZFOTNBNzYwQTgxMDREODVGQUJCM0E2ODAxODY0OUFBMDYACgkQuzpoAYZJ
qgaf4xAApFivCWXZ0TZQLRwu/S/z2tRSftNcEixja7T8LuvMeN1LUSXQ7K8vwpPB
btvUTSRMgz/mvVqyHc6UJKgEEhJ9tiqhJ4tHmp/ZLmPvzC1oRLjV7JCMyEqbzCcx
2SzF0wT2wrhG6ddyhx4Pgj+Tc3kclOA8HzkPQzPPEuiBCcKjFbHIbCFgp5cw8oEQ
KI2bMsoFFkJtVcSUeSYe7KmGJTuhHSBnOE/3QORUls0yi+/R6fULGbSZqhjGmmWr
BHlP6HTrefSf2uepyx/sL2cCp3N5aHa/jv1UIPZJ1xUDgBoMHwuuN8WTkNw2NDhV
HpNYrpNc0s1AsChp1Xo8mYoVbghOzLzD179MiHB5/miR+p4NiBZ9AGbmeTS2mbVP
iB6HPnW6pM2IDHKG/cYNJBfBDd0D+dOcNlSsVPVboQ0mYbH3WZEdtI7z+FZQbMpk
OcoVhUKrjFnqjgWRBArZuWgD4vfWPOUCJ8t9AogbJiF/Nds8WWEHgy77pODVTA36
Cec760R6N2bMy7RIg2o5vzB6RRGPyMJbeBEbuEcXWFxgSVXtOUc+nj6BgIIojr/8
V1gSV0QsWL24wY78HiD5xG7fIGRyCDP8Fz0S7qCja1/Bgmghlu1udIfk9McS3tOF
2wESifUgpAsefuL4/+8wUL/q5Jf5gh+Iq1EYDoPnR0M/F3oBl2g=
=BGuh
-----END PGP SIGNATURE-----
gpgv: Signature made Mon Nov 26 18:55:23 2018 UTC
gpgv: using RSA key D1E1316E93A760A8104D85FABB3A68018649AA06
gpgv: Can't check signature: No public key
dpkg-source: warning: cannot verify inline signature for ./libpod-readme-perl_1.2.3-1.dsc: no acceptable signature found
dpkg-source: info: extracting libpod-readme-perl in /<<PKGBUILDDIR>>
dpkg-source: info: unpacking libpod-readme-perl_1.2.3.orig.tar.gz
dpkg-source: info: unpacking libpod-readme-perl_1.2.3-1.debian.tar.xz
Check disk space
----------------
Sufficient free space for build
User Environment
----------------
APT_CONFIG=/var/lib/sbuild/apt.conf
HOME=/sbuild-nonexistent
LANG=en_US.UTF-8
LC_ALL=C.UTF-8
LOGNAME=debusine-worker
PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games
SHELL=/bin/sh
USER=debusine-worker
dpkg-buildpackage
-----------------
Command: dpkg-buildpackage -us -uc -b -rfakeroot
dpkg-buildpackage: info: source package libpod-readme-perl
dpkg-buildpackage: info: source version 1.2.3-1
dpkg-buildpackage: info: source distribution unstable
dpkg-buildpackage: info: source changed by gregor herrmann <gregoa@debian.org>
dpkg-source --before-build .
dpkg-buildpackage: info: host architecture arm64
debian/rules clean
dh clean
dh_clean
debian/rules binary
dh binary
dh_update_autotools_config
dh_autoreconf
dh_auto_configure
/usr/bin/perl -I. Makefile.PL INSTALLDIRS=vendor "OPTIMIZE=-g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wdate-time -D_FORTIFY_SOURCE=2" "LD=aarch64-linux-gnu-gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wl,-z,relro"
Warning: prerequisite Test::Kit 0 not found.
WARNING: Older versions of ExtUtils::MakeMaker may errantly install README.pod as part of this distribution. It is recommended to avoid using this path in CPAN modules.
Checking if your kit is complete...
Looks good
Generating a Unix-style Makefile
Writing Makefile for Pod::Readme
Writing MYMETA.yml and MYMETA.json
dh_auto_build
make -j8
make[1]: Entering directory '/<<PKGBUILDDIR>>'
cp lib/Pod/Readme/Plugin.pm blib/lib/Pod/Readme/Plugin.pm
cp lib/Pod/Readme/Plugin/changes.pm blib/lib/Pod/Readme/Plugin/changes.pm
cp lib/Pod/Readme/Types.pm blib/lib/Pod/Readme/Types.pm
cp lib/Pod/Readme/Plugin/requires.pm blib/lib/Pod/Readme/Plugin/requires.pm
cp lib/Pod/Readme/Plugin/version.pm blib/lib/Pod/Readme/Plugin/version.pm
cp lib/Pod/Readme/Filter.pm blib/lib/Pod/Readme/Filter.pm
cp lib/Pod/Readme.pm blib/lib/Pod/Readme.pm
cp bin/pod2readme blib/script/pod2readme
"/usr/bin/perl" -MExtUtils::MY -e 'MY->fixin(shift)' -- blib/script/pod2readme
Manifying 1 pod document
Manifying 7 pod documents
make[1]: Leaving directory '/<<PKGBUILDDIR>>'
dh_auto_test
make -j8 test TEST_VERBOSE=1
make[1]: Entering directory '/<<PKGBUILDDIR>>'
PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t t/plugins/*.t
#
# Versions for all modules listed in MYMETA.json (including optional ones):
#
# === Build Requires ===
#
# Module Want Have
# ------------------- ---- ----
# ExtUtils::MakeMaker any 7.70
#
# === Test Requires ===
#
# Module Want Have
# ----------------- ---- --------
# Cwd any 3.90
# File::Compare any 1.1008
# File::Spec any 3.90
# IO::String any 1.08
# Module::Metadata any 1.000038
# Pod::Simple::Text any 3.45
# Test::Deep any 1.204
# Test::Exception any 0.43
# Test::Kit any missing
# Test::More any 1.302199
#
# === Test Recommends ===
#
# Module Want Have
# ---------- -------- --------
# CPAN::Meta 2.120900 2.150010
#
# === Runtime Requires ===
#
# Module Want Have
# ------------------------- -------- ----------
# CPAN::Changes 0.30 0.500004
# CPAN::Meta any 2.150010
# Class::Method::Modifiers any 2.15
# File::Slurp any 9999.32
# Getopt::Long::Descriptive any 0.115
# Hash::Util any 0.32
# List::Util 1.33 1.63
# Module::CoreList any 5.20240609
# Moo any 2.005005
# Moo::Role any 2.005005
# MooX::HandlesVia any 0.001009
# Path::Tiny any 0.146
# Pod::Simple any 3.45
# Role::Tiny any 2.002004
# Scalar::Util any 1.63
# Try::Tiny any 0.32
# Type::Tiny 1.000000 2.004000
# Types::Standard any 2.004000
# namespace::autoclean any 0.31
#
# === Runtime Recommends ===
#
# Module Want Have
# --------------------- ---- -------
# Pod::Man any 5.01_02
# Pod::Markdown any missing
# Pod::Markdown::Github any missing
# Pod::Simple::HTML any 3.45
# Pod::Simple::LaTeX any missing
# Pod::Simple::RTF any 3.45
# Pod::Simple::Text any 3.45
# Pod::Simple::XHTML any 3.45
# Type::Tiny::XS any missing
#
#
# *** WARNING WARNING WARNING WARNING WARNING WARNING WARNING WARNING ***
#
# The following REQUIRED prerequisites were not satisfied:
#
# Test::Kit is not installed (any version required)
#
t/00-report-prereqs.t ........
1..1
ok 1
ok
t/10-pod-readme-filter.t .....
ok 1 - use Pod::Readme::Filter;
ok 2 - An object of class 'Pod::Readme::Filter' isa 'Pod::Readme::Filter'
ok 3 - Pod::Readme::Filter->can('cmd_stop')
ok 4 - Pod::Readme::Filter->can('cmd_start')
ok 5 - Pod::Readme::Filter->can('cmd_continue')
ok 6 - Pod::Readme::Filter->can('cmd_plugin')
ok 7 - default in target
ok 8 - mode
ok 9 - base_dir
ok 10 - cmd_stop
ok 11 - not in target
ok 12 - cmd_start
ok 13 - in target
ok 14 - cmd_stop
ok 15 - not in target
ok 16 - cmd_continue
ok 17 - in target
# =pod
ok 18 - expected output
ok 19 - mode
ok 20 - in target
# =for readme stop
ok 21 - mode
ok 22 - mode
ok 23 - no output
ok 24 - not in target
ok 25 - no output
# =for readme continue
ok 26 - mode
ok 27 - mode
ok 28 - in target
ok 29 - no output
# =for readme stop
ok 30 - mode
ok 31 - mode
ok 32 - no output
ok 33 - not in target
ok 34 - no output
# =for readme start
ok 35 - mode
ok 36 - mode
ok 37 - in target
ok 38 - no output
# =for readme plugin noop::invalid
ok 39 - mode
ok 40 - bad plugin
ok 41 - mode reset
# =cut
ok 42 - default mode
ok 43 - no content
# =head1 TEST
ok 44 - pod mode
ok 45 - expected content
ok 46 - output
# =begin text
ok 47 - mode
# =end text
ok 48 - no content
# =begin readme
ok 49 - mode
# =end readme
ok 50 - expected content (minimal)
not ok 51 - expected content # TODO extra newline
# Failed (TODO) test 'expected content'
# at t/10-pod-readme-filter.t line 152.
# got: 'Something
#
# '
# expected: 'Something
# '
# =begin readme text
ok 52 - mode
# =end readme
ok 53 - expected content
# =begin :readme
ok 54 - mode
# =end :readme
ok 55 - expected content (minimal)
not ok 56 - expected content # TODO extra newline
# Failed (TODO) test 'expected content'
# at t/10-pod-readme-filter.t line 177.
# got: 'Something
#
# =end text
#
# '
# expected: 'Something
# '
ok 57 - Pod::Readme::Filter->can('parse_cmd_args')
# {
# 'arg1' => 1,
# 'arg2' => 0,
# 'arg3' => 'This is a string',
# 'arg4' => 'value'
# }
ok 58 - expected parsing of arguments list
ok 59 - parse_cmd_args
ok 60 - bad arguments
ok 61 - Pod::Readme::Filter->can('depends_on')
ok 62 - depends_on
1..62
ok
t/20-pod-readme.t ............
ok 1 - use Pod::Readme;
ok 2 - An object of class 'Pod::Readme' isa 'Pod::Readme'
ok 3 - no noop
# =for readme plugin noop
ok 4 - mode
ok 5 - mode
ok 6 - in target
ok 7 - no output
ok 8 - Pod::Readme__WITH__Pod::Readme::Plugin::noop->can('cmd_noop')
ok 9 - An object of class 'Pod::Readme__WITH__Pod::Readme::Plugin::noop' isa 'Pod::Readme::Filter'
# =for readme plugin noop::invalid
ok 10 - mode
ok 11 - bad plugin
ok 12 - mode reset
# =for readme plugin noop
ok 13 - Pod::Readme__WITH__Pod::Readme::Plugin::noop->can(...)
ok 14 - plugin accessor default
ok 15 - plugin accessor default
# =for readme plugin noop bool
ok 16 - plugin accessor set
# =for readme plugin noop no-bool str="Isn't this nice?"
ok 17 - plugin accessor unset
ok 18 - plugin accessor set
# =for readme plugin noop no-bool bad-attr="this"
ok 19 - threw Regexp ((?^:Invalid argument key 'bad-attr' at input line \d+))
# /tmp/BGdaK52Ue4
ok 20 - new (no args)
ok 21 - expected output
ok 22 - parse_from_file
# /tmp/mjjZpxo3qf
ok 23 - expected output
ok 24 - parse_from_file (class method)
# /tmp/a61J9h1ku_
ok 25 - new (no args)
ok 26 - expected output
ok 27 - parse_from_filehandle
# /tmp/DsOghfKEIy
ok 28 - expected output
ok 29 - parse_from_filehandle (class method)
1..29
ok
t/author-clean-namespaces.t .. skipped: these tests are for testing by the author
t/author-critic.t ............ skipped: these tests are for testing by the author
t/author-eof.t ............... skipped: these tests are for testing by the author
t/author-eol.t ............... skipped: these tests are for testing by the author
t/author-minimum-version.t ... skipped: these tests are for testing by the author
t/author-no-tabs.t ........... skipped: these tests are for testing by the author
t/author-pod-syntax.t ........ skipped: these tests are for testing by the author
t/author-portability.t ....... skipped: these tests are for testing by the author
t/plugins/changes.t ..........
ok 1 - use Pod::Readme;
ok 2 - An object of class 'Pod::Readme' isa 'Pod::Readme'
# =for readme plugin changes
ok 3 - depends_on
ok 4 - dependencies_updated
# =head1 RECENT CHANGES
#
# =head2 Bug Fixes
#
# =over 4
#
# =item *
#
# Increased minimum version of Type::Tiny to 1.000000.
#
# =back
#
# See the F<Changes> file for a longer revision history.
#
ok 5 - =head1
1..5
ok
t/plugins/requires.t .........
ok 1 - use Pod::Readme;
ok 2 - An object of class 'Pod::Readme' isa 'Pod::Readme'
# =for readme plugin requires
ok 3 - run requires plugin
ok 4 - =head1
ok 5 - description
ok 6 - depends_on
ok 7 - dependencies_updated
# =for readme plugin requires from-file="t/data/META-1.yml" title="PREREQS"
# =head1 PREREQS
#
# This distribution requires Perl v5.10.1.
#
# This distribution requires the following modules:
#
# =over 4
#
# =item * L<CPAN::Changes>
#
# =item * L<CPAN::Meta>
#
# =item * L<Exporter::Lite>
#
# =item * L<File::Slurp>
#
# =item * L<Moose>
#
# =item * L<MooseX::Object::Pluggable>
#
# =item * L<MooseX::Types::IO>
#
# =item * L<MooseX::Types::Path::Class>
#
# =item * L<namespace::autoclean>
#
# =item * L<Path::Class>
#
# =item * L<Test::Most>
#
# =item * L<Try::Tiny>
#
# =back
#
ok 8 - =head1
ok 9 - minimum perl
# =for readme plugin requires file=nonexistent
ok 10 - die on bad filename
1..10
ok
t/plugins/version.t ..........
ok 1 - use Pod::Readme;
ok 2 - An object of class 'Pod::Readme' isa 'Pod::Readme'
# =for readme plugin version
ok 3
ok 4 - depends_on
ok 5 - dependencies_updated
# =for readme plugin version file=t/plugins/version.t title='THIS VER'
ok 6
# =for readme plugin version heading-level=2 title="Version"
ok 7
1..7
ok
t/release-check-manifest.t ... skipped: these tests are for release candidate testing
t/release-fixme.t ............ skipped: these tests are for release candidate testing
t/release-kwalitee.t ......... skipped: these tests are for release candidate testing
t/release-trailing-space.t ... skipped: these tests are for release candidate testing
All tests successful.
Files=18, Tests=114, 2 wallclock secs ( 0.07 usr 0.05 sys + 1.56 cusr 0.18 csys = 1.86 CPU)
Result: PASS
make[1]: Leaving directory '/<<PKGBUILDDIR>>'
create-stamp debian/debhelper-build-stamp
dh_prep
dh_auto_install --destdir=debian/libpod-readme-perl/
make -j8 install DESTDIR=/<<PKGBUILDDIR>>/debian/libpod-readme-perl AM_UPDATE_INFO_DIR=no PREFIX=/usr
make[1]: Entering directory '/<<PKGBUILDDIR>>'
Manifying 1 pod document
Manifying 7 pod documents
Installing /<<PKGBUILDDIR>>/debian/libpod-readme-perl/usr/share/perl5/Pod/Readme.pm
Installing /<<PKGBUILDDIR>>/debian/libpod-readme-perl/usr/share/perl5/Pod/Readme/Types.pm
Installing /<<PKGBUILDDIR>>/debian/libpod-readme-perl/usr/share/perl5/Pod/Readme/Plugin.pm
Installing /<<PKGBUILDDIR>>/debian/libpod-readme-perl/usr/share/perl5/Pod/Readme/Filter.pm
Installing /<<PKGBUILDDIR>>/debian/libpod-readme-perl/usr/share/perl5/Pod/Readme/Plugin/requires.pm
Installing /<<PKGBUILDDIR>>/debian/libpod-readme-perl/usr/share/perl5/Pod/Readme/Plugin/version.pm
Installing /<<PKGBUILDDIR>>/debian/libpod-readme-perl/usr/share/perl5/Pod/Readme/Plugin/changes.pm
Installing /<<PKGBUILDDIR>>/debian/libpod-readme-perl/usr/share/man/man1/pod2readme.1p
Installing /<<PKGBUILDDIR>>/debian/libpod-readme-perl/usr/share/man/man3/Pod::Readme.3pm
Installing /<<PKGBUILDDIR>>/debian/libpod-readme-perl/usr/share/man/man3/Pod::Readme::Filter.3pm
Installing /<<PKGBUILDDIR>>/debian/libpod-readme-perl/usr/share/man/man3/Pod::Readme::Plugin.3pm
Installing /<<PKGBUILDDIR>>/debian/libpod-readme-perl/usr/share/man/man3/Pod::Readme::Plugin::requires.3pm
Installing /<<PKGBUILDDIR>>/debian/libpod-readme-perl/usr/share/man/man3/Pod::Readme::Plugin::changes.3pm
Installing /<<PKGBUILDDIR>>/debian/libpod-readme-perl/usr/share/man/man3/Pod::Readme::Types.3pm
Installing /<<PKGBUILDDIR>>/debian/libpod-readme-perl/usr/share/man/man3/Pod::Readme::Plugin::version.3pm
Installing /<<PKGBUILDDIR>>/debian/libpod-readme-perl/usr/bin/pod2readme
make[1]: Leaving directory '/<<PKGBUILDDIR>>'
debian/rules override_dh_install
make[1]: Entering directory '/<<PKGBUILDDIR>>'
dh_install
sed -i '1s|^#!/usr/bin/env perl|#!/usr/bin/perl|' /<<PKGBUILDDIR>>/debian/libpod-readme-perl/usr/bin/pod2readme
make[1]: Leaving directory '/<<PKGBUILDDIR>>'
dh_installdocs
dh_installchangelogs
dh_installman
dh_lintian
dh_perl
dh_link
dh_strip_nondeterminism
dh_compress
dh_fixperms
dh_missing
dh_installdeb
dh_gencontrol
dh_md5sums
dh_builddeb
dpkg-deb: building package 'libpod-readme-perl' in '../libpod-readme-perl_1.2.3-1_all.deb'.
dpkg-genbuildinfo --build=binary -O../libpod-readme-perl_1.2.3-1_arm64.buildinfo
dpkg-genchanges --build=binary -O../libpod-readme-perl_1.2.3-1_arm64.changes
dpkg-genchanges: info: binary-only upload (no source code included)
dpkg-source --after-build .
dpkg-buildpackage: info: binary-only upload (no source included)
--------------------------------------------------------------------------------
Build finished at 2024-11-17T04:14:16Z
Finished
--------
I: Built successfully
+------------------------------------------------------------------------------+
| Changes |
+------------------------------------------------------------------------------+
libpod-readme-perl_1.2.3-1_arm64.changes:
-----------------------------------------
Format: 1.8
Date: Mon, 26 Nov 2018 19:53:51 +0100
Source: libpod-readme-perl
Binary: libpod-readme-perl
Architecture: all
Version: 1.2.3-1
Distribution: sid
Urgency: medium
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Changed-By: gregor herrmann <gregoa@debian.org>
Description:
libpod-readme-perl - Perl module to convert POD to README file
Changes:
libpod-readme-perl (1.2.3-1) unstable; urgency=medium
.
* Team upload.
.
[ Salvatore Bonaccorso ]
* Update Vcs-* headers for switch to salsa.debian.org
.
[ Laurent Baillet ]
* fix lintian wrong-path-for-interpreter error
.
[ gregor herrmann ]
* Import upstream version 1.2.3.
* Update debian/upstream/metadata.
* Update years of upstream copyright.
* Remove third party file information.
* Drop fix-spelling-erros-in-manpages.patch, merged upstream.
* Declare compliance with Debian Policy 4.2.1.
* Bump debhelper compatibility level to 10.
* Add a lintian override for package-contains-documentation-outside-usr-
share-doc false positive.
Checksums-Sha1:
0280ba008ac2d659c4a010fd8fc26c89a98d4e0e 34388 libpod-readme-perl_1.2.3-1_all.deb
58247676a1fb51b4566967ce5d5178d326b70bae 6214 libpod-readme-perl_1.2.3-1_arm64.buildinfo
Checksums-Sha256:
d1adce2ba3c4a9916233799b04670721bd6d20f92e0df10d2a74358e3608bdfb 34388 libpod-readme-perl_1.2.3-1_all.deb
90a285ec5ad11f4de5da7042a0c33eba5bfb423e68c4d580a70a8db1d6e7bb65 6214 libpod-readme-perl_1.2.3-1_arm64.buildinfo
Files:
fb8c7f0d03317e00535b4fb2c9b021f0 34388 perl optional libpod-readme-perl_1.2.3-1_all.deb
2c3af17457dc1ae3f3a390e84066bb2d 6214 perl optional libpod-readme-perl_1.2.3-1_arm64.buildinfo
+------------------------------------------------------------------------------+
| Buildinfo |
+------------------------------------------------------------------------------+
Format: 1.0
Source: libpod-readme-perl
Binary: libpod-readme-perl
Architecture: all
Version: 1.2.3-1
Checksums-Md5:
fb8c7f0d03317e00535b4fb2c9b021f0 34388 libpod-readme-perl_1.2.3-1_all.deb
Checksums-Sha1:
0280ba008ac2d659c4a010fd8fc26c89a98d4e0e 34388 libpod-readme-perl_1.2.3-1_all.deb
Checksums-Sha256:
d1adce2ba3c4a9916233799b04670721bd6d20f92e0df10d2a74358e3608bdfb 34388 libpod-readme-perl_1.2.3-1_all.deb
Build-Origin: Debian
Build-Architecture: arm64
Build-Date: Sun, 17 Nov 2024 04:14:15 +0000
Build-Path: /<<PKGBUILDDIR>>
Build-Tainted-By:
merged-usr-via-aliased-dirs
Installed-Build-Depends:
autoconf (= 2.72-3),
automake (= 1:1.16.5-1.3),
autopoint (= 0.22.5-2),
autotools-dev (= 20220109.1),
base-files (= 13.5),
base-passwd (= 3.6.5),
bash (= 5.2.32-1+b2),
binutils (= 2.43.1-5),
binutils-aarch64-linux-gnu (= 2.43.1-5),
binutils-common (= 2.43.1-5),
bsdextrautils (= 2.40.2-11),
bsdutils (= 1:2.40.2-11),
build-essential (= 12.12),
bzip2 (= 1.0.8-6),
coreutils (= 9.5-1+b1),
cpp (= 4:14.2.0-1),
cpp-14 (= 14.2.0-8),
cpp-14-aarch64-linux-gnu (= 14.2.0-8),
cpp-aarch64-linux-gnu (= 4:14.2.0-1),
dash (= 0.5.12-9+b1),
debconf (= 1.5.87),
debhelper (= 13.20),
debianutils (= 5.21),
dh-autoreconf (= 20),
dh-strip-nondeterminism (= 1.14.0-1),
diffutils (= 1:3.10-1+b1),
dpkg (= 1.22.12~1.gbp82cafd),
dpkg-dev (= 1.22.12~1.gbp82cafd),
dwz (= 0.15-1+b1),
file (= 1:5.45-3+b1),
findutils (= 4.10.0-3),
g++ (= 4:14.2.0-1),
g++-14 (= 14.2.0-8),
g++-14-aarch64-linux-gnu (= 14.2.0-8),
g++-aarch64-linux-gnu (= 4:14.2.0-1),
gcc (= 4:14.2.0-1),
gcc-14 (= 14.2.0-8),
gcc-14-aarch64-linux-gnu (= 14.2.0-8),
gcc-14-base (= 14.2.0-8),
gcc-aarch64-linux-gnu (= 4:14.2.0-1),
gettext (= 0.22.5-2),
gettext-base (= 0.22.5-2),
grep (= 3.11-4+b1),
groff-base (= 1.23.0-5),
gzip (= 1.12-1.1+b1),
hostname (= 3.25),
init-system-helpers (= 1.67),
intltool-debian (= 0.35.0+20060710.6),
libacl1 (= 2.3.2-2+b1),
libarchive-zip-perl (= 1.68-1),
libasan8 (= 14.2.0-8),
libatomic1 (= 14.2.0-8),
libattr1 (= 1:2.5.2-2),
libaudit-common (= 1:4.0.2-2),
libaudit1 (= 1:4.0.2-2),
libb-hooks-endofscope-perl (= 0.28-1),
libb-hooks-op-check-perl (= 0.22-3+b2),
libbinutils (= 2.43.1-5),
libblkid1 (= 2.40.2-11),
libbz2-1.0 (= 1.0.8-6),
libc-bin (= 2.40-3),
libc-dev-bin (= 2.40-3),
libc6 (= 2.40-3),
libc6-dev (= 2.40-3),
libcap-ng0 (= 0.8.5-3+b1),
libcap2 (= 1:2.66-5+b1),
libcc1-0 (= 14.2.0-8),
libclass-method-modifiers-perl (= 2.15-1),
libclass-xsaccessor-perl (= 1.19-4+b4),
libcpan-changes-perl (= 0.500004-1),
libcrypt-dev (= 1:4.4.36-5),
libcrypt1 (= 1:4.4.36-5),
libctf-nobfd0 (= 2.43.1-5),
libctf0 (= 2.43.1-5),
libdata-optlist-perl (= 0.114-1),
libdata-perl-perl (= 0.002011-2),
libdb5.3t64 (= 5.3.28+dfsg2-9),
libdebconfclient0 (= 0.273),
libdebhelper-perl (= 13.20),
libdevel-callchecker-perl (= 0.009-1+b1),
libdpkg-perl (= 1.22.12~1.gbp82cafd),
libdynaloader-functions-perl (= 0.004-1),
libelf1t64 (= 0.192-4),
libexporter-tiny-perl (= 1.006002-1),
libfile-slurp-perl (= 9999.32-2),
libfile-stripnondeterminism-perl (= 1.14.0-1),
libgcc-14-dev (= 14.2.0-8),
libgcc-s1 (= 14.2.0-8),
libgdbm-compat4t64 (= 1.24-2),
libgdbm6t64 (= 1.24-2),
libgetopt-long-descriptive-perl (= 0.115-1),
libgmp10 (= 2:6.3.0+dfsg-2+b2),
libgomp1 (= 14.2.0-8),
libgprofng0 (= 2.43.1-5),
libhwasan0 (= 14.2.0-8),
libicu72 (= 72.1-5+b1),
libimport-into-perl (= 1.002005-2),
libio-string-perl (= 1.08-4),
libio-stringy-perl (= 2.113-2),
libisl23 (= 0.27-1),
libitm1 (= 14.2.0-8),
libjansson4 (= 2.14-2+b3),
liblist-moreutils-perl (= 0.430-2),
liblist-moreutils-xs-perl (= 0.430-4+b2),
liblsan0 (= 14.2.0-8),
liblzma5 (= 5.6.3-1+b1),
libmagic-mgc (= 1:5.45-3+b1),
libmagic1t64 (= 1:5.45-3+b1),
libmd0 (= 1.1.0-2+b1),
libmodule-implementation-perl (= 0.09-2),
libmodule-runtime-perl (= 0.016-2),
libmoo-perl (= 2.005005-1),
libmoox-handlesvia-perl (= 0.001009-2),
libmount1 (= 2.40.2-11),
libmpc3 (= 1.3.1-1+b3),
libmpfr6 (= 4.2.1-1+b2),
libnamespace-autoclean-perl (= 0.31-1),
libnamespace-clean-perl (= 0.27-2),
libpackage-stash-perl (= 0.40-1),
libpam-modules (= 1.5.3-7+b1),
libpam-modules-bin (= 1.5.3-7+b1),
libpam-runtime (= 1.5.3-7),
libpam0g (= 1.5.3-7+b1),
libparams-classify-perl (= 0.015-2+b4),
libparams-util-perl (= 1.102-3+b1),
libparams-validate-perl (= 1.31-2+b3),
libpath-tiny-perl (= 0.146-1),
libpcre2-8-0 (= 10.44-4),
libperl5.40 (= 5.40.0-7),
libpipeline1 (= 1.5.8-1),
librole-tiny-perl (= 2.002004-1),
libseccomp2 (= 2.5.5-1+b3),
libselinux1 (= 3.7-3+b1),
libsframe1 (= 2.43.1-5),
libsmartcols1 (= 2.40.2-11),
libssl3t64 (= 3.3.2-2),
libstdc++-14-dev (= 14.2.0-8),
libstdc++6 (= 14.2.0-8),
libstrictures-perl (= 2.000006-1),
libsub-exporter-perl (= 0.990-1),
libsub-exporter-progressive-perl (= 0.001013-3),
libsub-identify-perl (= 0.14-3+b3),
libsub-install-perl (= 0.929-1),
libsub-name-perl (= 0.27-1+b3),
libsub-quote-perl (= 2.006008-1),
libsub-uplevel-perl (= 0.2800-3),
libsystemd0 (= 257~rc2-3),
libtest-deep-perl (= 1.204-1),
libtest-exception-perl (= 0.43-3),
libtinfo6 (= 6.5-2+b1),
libtool (= 2.4.7-8),
libtry-tiny-perl (= 0.32-1),
libtsan2 (= 14.2.0-8),
libtype-tiny-perl (= 2.004000-1),
libubsan1 (= 14.2.0-8),
libuchardet0 (= 0.0.8-1+b2),
libudev1 (= 257~rc2-3),
libunistring5 (= 1.2-1+b1),
libuuid1 (= 2.40.2-11),
libvariable-magic-perl (= 0.64-1+b1),
libxml2 (= 2.12.7+dfsg+really2.9.14-0.2+b1),
libzstd1 (= 1.5.6+dfsg-1+b1),
linux-libc-dev (= 6.11.7-1),
m4 (= 1.4.19-4),
make (= 4.3-4.1+b1),
man-db (= 2.13.0-1),
mawk (= 1.3.4.20240905-1),
ncurses-base (= 6.5-2),
ncurses-bin (= 6.5-2+b1),
openssl-provider-legacy (= 3.3.2-2),
patch (= 2.7.6-7+b1),
perl (= 5.40.0-7),
perl-base (= 5.40.0-7),
perl-modules-5.40 (= 5.40.0-7),
po-debconf (= 1.0.21+nmu1),
rpcsvc-proto (= 1.4.3-1+b1),
sed (= 4.9-2+b1),
sensible-utils (= 0.0.24),
sysvinit-utils (= 3.11-1),
tar (= 1.35+dfsg-3+b1),
util-linux (= 2.40.2-11),
xz-utils (= 5.6.3-1+b1),
zlib1g (= 1:1.3.dfsg+really1.3.1-1+b1)
Environment:
DEB_BUILD_OPTIONS="parallel=8"
LANG="en_US.UTF-8"
LC_ALL="C.UTF-8"
SOURCE_DATE_EPOCH="1543258431"
+------------------------------------------------------------------------------+
| Package contents |
+------------------------------------------------------------------------------+
libpod-readme-perl_1.2.3-1_all.deb
----------------------------------
new Debian package, version 2.0.
size 34388 bytes: control archive=1404 bytes.
1023 bytes, 17 lines control
1541 bytes, 20 lines md5sums
Package: libpod-readme-perl
Version: 1.2.3-1
Architecture: all
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Installed-Size: 95
Depends: perl:any, libclass-method-modifiers-perl (>= 2.00), libcpan-changes-perl (>= 0.30), libfile-slurp-perl, libgetopt-long-descriptive-perl, libmoo-perl (>= 1.004005), libmoox-handlesvia-perl, libnamespace-autoclean-perl, libpath-tiny-perl, librole-tiny-perl, libtry-tiny-perl, libtype-tiny-perl, perl (>= 5.19.5) | libscalar-list-utils-perl (>= 1:1.33)
Recommends: libpod-markdown-perl, libtype-tiny-xs-perl
Section: perl
Priority: optional
Homepage: https://metacpan.org/release/Pod-Readme
Description: Perl module to convert POD to README file
Pod::Readme is no longer a subclass of a POD parsing module. Instead, it is a
simple POD filter.
.
This module allows authors to mark portions of the POD to be included only in,
or to be excluded from the README file. It also allows you to include
portions of another file (such as a separate ChangeLog).
drwxr-xr-x root/root 0 2018-11-26 18:53 ./
drwxr-xr-x root/root 0 2018-11-26 18:53 ./usr/
drwxr-xr-x root/root 0 2018-11-26 18:53 ./usr/bin/
-rwxr-xr-x root/root 4677 2018-11-26 18:53 ./usr/bin/pod2readme
drwxr-xr-x root/root 0 2018-11-26 18:53 ./usr/share/
drwxr-xr-x root/root 0 2018-11-26 18:53 ./usr/share/doc/
drwxr-xr-x root/root 0 2018-11-26 18:53 ./usr/share/doc/libpod-readme-perl/
-rw-r--r-- root/root 1334 2018-11-26 18:53 ./usr/share/doc/libpod-readme-perl/changelog.Debian.gz
-rw-r--r-- root/root 3581 2018-10-31 22:56 ./usr/share/doc/libpod-readme-perl/changelog.gz
-rw-r--r-- root/root 1118 2018-11-26 18:53 ./usr/share/doc/libpod-readme-perl/copyright
drwxr-xr-x root/root 0 2018-11-26 18:53 ./usr/share/lintian/
drwxr-xr-x root/root 0 2018-11-26 18:53 ./usr/share/lintian/overrides/
-rw-r--r-- root/root 177 2018-11-26 18:53 ./usr/share/lintian/overrides/libpod-readme-perl
drwxr-xr-x root/root 0 2018-11-26 18:53 ./usr/share/man/
drwxr-xr-x root/root 0 2018-11-26 18:53 ./usr/share/man/man1/
-rw-r--r-- root/root 1864 2018-11-26 18:53 ./usr/share/man/man1/pod2readme.1p.gz
drwxr-xr-x root/root 0 2018-11-26 18:53 ./usr/share/man/man3/
-rw-r--r-- root/root 3335 2018-11-26 18:53 ./usr/share/man/man3/Pod::Readme.3pm.gz
-rw-r--r-- root/root 1065 2018-11-26 18:53 ./usr/share/man/man3/Pod::Readme::Filter.3pm.gz
-rw-r--r-- root/root 2599 2018-11-26 18:53 ./usr/share/man/man3/Pod::Readme::Plugin.3pm.gz
-rw-r--r-- root/root 1409 2018-11-26 18:53 ./usr/share/man/man3/Pod::Readme::Plugin::changes.3pm.gz
-rw-r--r-- root/root 1604 2018-11-26 18:53 ./usr/share/man/man3/Pod::Readme::Plugin::requires.3pm.gz
-rw-r--r-- root/root 1166 2018-11-26 18:53 ./usr/share/man/man3/Pod::Readme::Plugin::version.3pm.gz
-rw-r--r-- root/root 1462 2018-11-26 18:53 ./usr/share/man/man3/Pod::Readme::Types.3pm.gz
drwxr-xr-x root/root 0 2018-11-26 18:53 ./usr/share/perl5/
drwxr-xr-x root/root 0 2018-11-26 18:53 ./usr/share/perl5/Pod/
-rw-r--r-- root/root 10724 2018-10-31 22:56 ./usr/share/perl5/Pod/Readme.pm
drwxr-xr-x root/root 0 2018-11-26 18:53 ./usr/share/perl5/Pod/Readme/
-rw-r--r-- root/root 9248 2018-10-31 22:56 ./usr/share/perl5/Pod/Readme/Filter.pm
-rw-r--r-- root/root 7208 2018-10-31 22:56 ./usr/share/perl5/Pod/Readme/Plugin.pm
drwxr-xr-x root/root 0 2018-11-26 18:53 ./usr/share/perl5/Pod/Readme/Plugin/
-rw-r--r-- root/root 3831 2018-10-31 22:56 ./usr/share/perl5/Pod/Readme/Plugin/changes.pm
-rw-r--r-- root/root 5364 2018-10-31 22:56 ./usr/share/perl5/Pod/Readme/Plugin/requires.pm
-rw-r--r-- root/root 2425 2018-10-31 22:56 ./usr/share/perl5/Pod/Readme/Plugin/version.pm
-rw-r--r-- root/root 3545 2018-10-31 22:56 ./usr/share/perl5/Pod/Readme/Types.pm
lintian
-------
Setup apt archive
-----------------
Merged Build-Depends: lintian
Filtered Build-Depends: lintian
dpkg-deb: warning: root directory has unusual owner or group 998:999.
Hint: either pass --root-owner-group, see dpkg-build-api(7) or add an explicit 'Rules-Requires-Root: no' in debian/control.
dpkg-deb: warning: ignoring 1 warning about the control file(s)
dpkg-deb: building package 'sbuild-build-depends-lintian-dummy' in '/<<RESOLVERDIR>>/apt_archive/sbuild-build-depends-lintian-dummy.deb'.
Ign:1 copy:/<<RESOLVERDIR>>/apt_archive ./ InRelease
Get:2 copy:/<<RESOLVERDIR>>/apt_archive ./ Release [615 B]
Ign:3 copy:/<<RESOLVERDIR>>/apt_archive ./ Release.gpg
Get:4 copy:/<<RESOLVERDIR>>/apt_archive ./ Sources [1622 B]
Get:5 copy:/<<RESOLVERDIR>>/apt_archive ./ Packages [1625 B]
Fetched 3862 B in 0s (329 kB/s)
Reading package lists...
Get:1 file:/<<BUILDDIR>>/resolver-5Ng4Cj/apt_archive ./ InRelease
Ign:1 file:/<<BUILDDIR>>/resolver-5Ng4Cj/apt_archive ./ InRelease
Get:2 file:/<<BUILDDIR>>/resolver-5Ng4Cj/apt_archive ./ Release [606 B]
Get:2 file:/<<BUILDDIR>>/resolver-5Ng4Cj/apt_archive ./ Release [606 B]
Get:3 file:/<<BUILDDIR>>/resolver-5Ng4Cj/apt_archive ./ Release.gpg
Ign:3 file:/<<BUILDDIR>>/resolver-5Ng4Cj/apt_archive ./ Release.gpg
Reading package lists...
Reading package lists...
Install lintian build dependencies (apt-based resolver)
-------------------------------------------------------
Installing build dependencies
Reading package lists...
Building dependency tree...
Reading state information...
The following NEW packages will be installed:
sbuild-build-depends-lintian-dummy
0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded.
Need to get 852 B of archives.
After this operation, 0 B of additional disk space will be used.
Get:1 copy:/<<RESOLVERDIR>>/apt_archive ./ sbuild-build-depends-lintian-dummy 0.invalid.0 [852 B]
debconf: delaying package configuration, since apt-utils is not installed
Fetched 852 B in 0s (0 B/s)
Selecting previously unselected package sbuild-build-depends-lintian-dummy.
(Reading database ... 22960 files and directories currently installed.)
Preparing to unpack .../sbuild-build-depends-lintian-dummy_0.invalid.0_arm64.deb ...
Unpacking sbuild-build-depends-lintian-dummy (0.invalid.0) ...
Setting up sbuild-build-depends-lintian-dummy (0.invalid.0) ...
Running lintian...
W: libpod-readme-perl changes: distribution-and-changes-mismatch sid unstable
I: Lintian run was successful.
+------------------------------------------------------------------------------+
| Post Build |
+------------------------------------------------------------------------------+
+------------------------------------------------------------------------------+
| Cleanup |
+------------------------------------------------------------------------------+
Purging /<<BUILDDIR>>
Not cleaning session: cloned chroot in use
+------------------------------------------------------------------------------+
| Summary |
+------------------------------------------------------------------------------+
Build Architecture: arm64
Build Type: binary
Build-Space: 852
Build-Time: 8
Distribution: sid
Host Architecture: arm64
Install-Time: 19
Job: /tmp/debusine-fetch-exec-upload-6keg2za1/libpod-readme-perl_1.2.3-1.dsc
Lintian: warn
Machine Architecture: arm64
Package: libpod-readme-perl
Package-Time: 63
Source-Version: 1.2.3-1
Space: 852
Status: successful
Version: 1.2.3-1
--------------------------------------------------------------------------------
Finished at 2024-11-17T04:14:16Z
Build needed 00:01:03, 852k disk space