sbuild (Debian sbuild) 0.86.3~bpo12+1 (03 November 2024) on debusine-worker-arm64-demeter-05.freexian.com
+==============================================================================+
| libpod-wsdl-perl 0.063-2 (arm64) Sun, 17 Nov 2024 04:15:17 +0000 |
+==============================================================================+
Package: libpod-wsdl-perl
Version: 0.063-2
Source Version: 0.063-2
Distribution: sid
Machine Architecture: arm64
Host Architecture: arm64
Build Architecture: arm64
Build Type: binary
I: No tarballs found in /var/lib/debusine/worker/.cache/sbuild
Unpacking /var/lib/debusine/worker/system-images/957781/system.tar.xz to /tmp/tmp.sbuild.iPPiQsAVo2...
I: NOTICE: Log filtering will replace 'sbuild-unshare-dummy-location' with '<<CHROOT>>'
+------------------------------------------------------------------------------+
| Chroot Setup Commands |
+------------------------------------------------------------------------------+
rm -f /etc/resolv.conf
----------------------
I: Finished running 'rm -f /etc/resolv.conf'.
Finished processing commands.
--------------------------------------------------------------------------------
Copying /tmp/debusine-fetch-exec-upload-3z63rbfv/dpkg-dbgsym_1.22.12~1.gbp82cafd_arm64.deb to /<<CHROOT>>...
Copying /tmp/debusine-fetch-exec-upload-3z63rbfv/dpkg_1.22.12~1.gbp82cafd_arm64.deb to /<<CHROOT>>...
Copying /tmp/debusine-fetch-exec-upload-3z63rbfv/dselect-dbgsym_1.22.12~1.gbp82cafd_arm64.deb to /<<CHROOT>>...
Copying /tmp/debusine-fetch-exec-upload-3z63rbfv/dselect_1.22.12~1.gbp82cafd_arm64.deb to /<<CHROOT>>...
Copying /tmp/debusine-fetch-exec-upload-3z63rbfv/libdpkg-dev_1.22.12~1.gbp82cafd_arm64.deb to /<<CHROOT>>...
Copying /tmp/debusine-fetch-exec-upload-3z63rbfv/dpkg-dev_1.22.12~1.gbp82cafd_all.deb to /<<CHROOT>>...
Copying /tmp/debusine-fetch-exec-upload-3z63rbfv/libdpkg-perl_1.22.12~1.gbp82cafd_all.deb to /<<CHROOT>>...
I: NOTICE: Log filtering will replace 'build/libpod-wsdl-perl-zeYBKF/resolver-6XgTsY' with '<<RESOLVERDIR>>'
+------------------------------------------------------------------------------+
| Update chroot |
+------------------------------------------------------------------------------+
Get:1 file:/build/libpod-wsdl-perl-zeYBKF/resolver-tKZ1C4/apt_archive ./ InRelease
Ign:1 file:/build/libpod-wsdl-perl-zeYBKF/resolver-tKZ1C4/apt_archive ./ InRelease
Get:2 file:/build/libpod-wsdl-perl-zeYBKF/resolver-tKZ1C4/apt_archive ./ Release [606 B]
Get:3 http://deb.debian.org/debian sid InRelease [202 kB]
Get:2 file:/build/libpod-wsdl-perl-zeYBKF/resolver-tKZ1C4/apt_archive ./ Release [606 B]
Get:4 file:/build/libpod-wsdl-perl-zeYBKF/resolver-tKZ1C4/apt_archive ./ Release.gpg
Ign:4 file:/build/libpod-wsdl-perl-zeYBKF/resolver-tKZ1C4/apt_archive ./ Release.gpg
Get:5 file:/build/libpod-wsdl-perl-zeYBKF/resolver-tKZ1C4/apt_archive ./ Packages [9246 B]
Get:6 http://deb.debian.org/debian sid/main arm64 Packages [9952 kB]
Get:7 http://deb.debian.org/debian sid/main arm64 Components [4907 kB]
Fetched 15.1 MB in 2s (6361 kB/s)
Reading package lists...
Reading package lists...
Building dependency tree...
Reading state information...
Calculating upgrade...
The following packages will be upgraded:
apt bsdextrautils bsdutils debianutils dpkg dpkg-dev libapt-pkg6.0t64
libaudit-common libaudit1 libblkid1 libbrotli1 libcap-ng0 libdpkg-perl
libglib2.0-0t64 libmarkdown2 libmount1 libpcre2-8-0 libseccomp2 libselinux1
libsemanage2 libsmartcols1 libsystemd0 libudev1 libuuid1 libxml2 login
login.defs mount passwd util-linux
30 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
Need to get 9274 kB/12.8 MB of archives.
After this operation, 603 kB disk space will be freed.
Get:1 http://deb.debian.org/debian sid/main arm64 bsdutils arm64 1:2.40.2-11 [104 kB]
Get:2 file:/build/libpod-wsdl-perl-zeYBKF/resolver-tKZ1C4/apt_archive ./ dpkg 1.22.12~1.gbp82cafd [1513 kB]
Get:3 file:/build/libpod-wsdl-perl-zeYBKF/resolver-tKZ1C4/apt_archive ./ dpkg-dev 1.22.12~1.gbp82cafd [1337 kB]
Get:4 http://deb.debian.org/debian sid/main arm64 debianutils arm64 5.21 [92.1 kB]
Get:5 http://deb.debian.org/debian sid/main arm64 libsystemd0 arm64 257~rc2-3 [416 kB]
Get:6 file:/build/libpod-wsdl-perl-zeYBKF/resolver-tKZ1C4/apt_archive ./ libdpkg-perl 1.22.12~1.gbp82cafd [647 kB]
Get:7 http://deb.debian.org/debian sid/main arm64 libudev1 arm64 257~rc2-3 [139 kB]
Get:8 http://deb.debian.org/debian sid/main arm64 libapt-pkg6.0t64 arm64 2.9.11 [921 kB]
Get:9 http://deb.debian.org/debian sid/main arm64 bsdextrautils arm64 2.40.2-11 [91.2 kB]
Get:10 http://deb.debian.org/debian sid/main arm64 libblkid1 arm64 2.40.2-11 [162 kB]
Get:11 http://deb.debian.org/debian sid/main arm64 libmount1 arm64 2.40.2-11 [190 kB]
Get:12 http://deb.debian.org/debian sid/main arm64 libsmartcols1 arm64 2.40.2-11 [135 kB]
Get:13 http://deb.debian.org/debian sid/main arm64 mount arm64 2.40.2-11 [153 kB]
Get:14 http://deb.debian.org/debian sid/main arm64 libuuid1 arm64 2.40.2-11 [35.7 kB]
Get:15 http://deb.debian.org/debian sid/main arm64 util-linux arm64 2.40.2-11 [1170 kB]
Get:16 http://deb.debian.org/debian sid/main arm64 libpcre2-8-0 arm64 10.44-4 [243 kB]
Get:17 http://deb.debian.org/debian sid/main arm64 libselinux1 arm64 3.7-3+b1 [72.1 kB]
Get:18 http://deb.debian.org/debian sid/main arm64 libseccomp2 arm64 2.5.5-1+b3 [46.8 kB]
Get:19 http://deb.debian.org/debian sid/main arm64 apt arm64 2.9.11 [1287 kB]
Get:20 http://deb.debian.org/debian sid/main arm64 libaudit-common all 1:4.0.2-2 [12.7 kB]
Get:21 http://deb.debian.org/debian sid/main arm64 libcap-ng0 arm64 0.8.5-3+b1 [17.0 kB]
Get:22 http://deb.debian.org/debian sid/main arm64 libaudit1 arm64 1:4.0.2-2 [54.2 kB]
Get:23 http://deb.debian.org/debian sid/main arm64 login arm64 1:4.16.0-2+really2.40.2-11 [80.0 kB]
Get:24 http://deb.debian.org/debian sid/main arm64 login.defs all 1:4.16.0-5 [185 kB]
Get:25 http://deb.debian.org/debian sid/main arm64 libsemanage2 arm64 3.7-2+b1 [84.5 kB]
Get:26 http://deb.debian.org/debian sid/main arm64 passwd arm64 1:4.16.0-5 [1210 kB]
Get:27 http://deb.debian.org/debian sid/main arm64 libbrotli1 arm64 1.1.0-2+b6 [297 kB]
Get:28 http://deb.debian.org/debian sid/main arm64 libglib2.0-0t64 arm64 2.82.2-3 [1411 kB]
Get:29 http://deb.debian.org/debian sid/main arm64 libmarkdown2 arm64 2.2.7-2.1 [33.1 kB]
Get:30 http://deb.debian.org/debian sid/main arm64 libxml2 arm64 2.12.7+dfsg+really2.9.14-0.2+b1 [630 kB]
debconf: delaying package configuration, since apt-utils is not installed
Fetched 9274 kB in 0s (61.2 MB/s)
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 17129 files and directories currently installed.)
Preparing to unpack .../bsdutils_1%3a2.40.2-11_arm64.deb ...
Unpacking bsdutils (1:2.40.2-11) over (1:2.40.2-10) ...
Setting up bsdutils (1:2.40.2-11) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 17129 files and directories currently installed.)
Preparing to unpack .../debianutils_5.21_arm64.deb ...
Unpacking debianutils (5.21) over (5.20+b1) ...
Setting up debianutils (5.21) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 17128 files and directories currently installed.)
Preparing to unpack .../libsystemd0_257~rc2-3_arm64.deb ...
Unpacking libsystemd0:arm64 (257~rc2-3) over (257~rc1-4) ...
Setting up libsystemd0:arm64 (257~rc2-3) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 17128 files and directories currently installed.)
Preparing to unpack .../libudev1_257~rc2-3_arm64.deb ...
Unpacking libudev1:arm64 (257~rc2-3) over (257~rc1-4) ...
Setting up libudev1:arm64 (257~rc2-3) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 17128 files and directories currently installed.)
Preparing to unpack .../libapt-pkg6.0t64_2.9.11_arm64.deb ...
Unpacking libapt-pkg6.0t64:arm64 (2.9.11) over (2.9.10) ...
Setting up libapt-pkg6.0t64:arm64 (2.9.11) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 17128 files and directories currently installed.)
Preparing to unpack .../dpkg_1.22.12~1.gbp82cafd_arm64.deb ...
Unpacking dpkg (1.22.12~1.gbp82cafd) over (1.22.11) ...
Setting up dpkg (1.22.12~1.gbp82cafd) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 17127 files and directories currently installed.)
Preparing to unpack .../bsdextrautils_2.40.2-11_arm64.deb ...
Unpacking bsdextrautils (2.40.2-11) over (2.40.2-10) ...
Preparing to unpack .../libblkid1_2.40.2-11_arm64.deb ...
Unpacking libblkid1:arm64 (2.40.2-11) over (2.40.2-10) ...
Setting up libblkid1:arm64 (2.40.2-11) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 17123 files and directories currently installed.)
Preparing to unpack .../libmount1_2.40.2-11_arm64.deb ...
Unpacking libmount1:arm64 (2.40.2-11) over (2.40.2-10) ...
Setting up libmount1:arm64 (2.40.2-11) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 17123 files and directories currently installed.)
Preparing to unpack .../libsmartcols1_2.40.2-11_arm64.deb ...
Unpacking libsmartcols1:arm64 (2.40.2-11) over (2.40.2-10) ...
Setting up libsmartcols1:arm64 (2.40.2-11) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 17123 files and directories currently installed.)
Preparing to unpack .../mount_2.40.2-11_arm64.deb ...
Unpacking mount (2.40.2-11) over (2.40.2-10) ...
Preparing to unpack .../libuuid1_2.40.2-11_arm64.deb ...
Unpacking libuuid1:arm64 (2.40.2-11) over (2.40.2-10) ...
Setting up libuuid1:arm64 (2.40.2-11) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 17123 files and directories currently installed.)
Preparing to unpack .../util-linux_2.40.2-11_arm64.deb ...
Unpacking util-linux (2.40.2-11) over (2.40.2-10) ...
Setting up util-linux (2.40.2-11) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 17120 files and directories currently installed.)
Preparing to unpack .../libpcre2-8-0_10.44-4_arm64.deb ...
Unpacking libpcre2-8-0:arm64 (10.44-4) over (10.42-4+b2) ...
Setting up libpcre2-8-0:arm64 (10.44-4) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 17119 files and directories currently installed.)
Preparing to unpack .../libselinux1_3.7-3+b1_arm64.deb ...
Unpacking libselinux1:arm64 (3.7-3+b1) over (3.7-3) ...
Setting up libselinux1:arm64 (3.7-3+b1) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 17120 files and directories currently installed.)
Preparing to unpack .../libseccomp2_2.5.5-1+b3_arm64.deb ...
Unpacking libseccomp2:arm64 (2.5.5-1+b3) over (2.5.5-1+b2) ...
Setting up libseccomp2:arm64 (2.5.5-1+b3) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 17120 files and directories currently installed.)
Preparing to unpack .../archives/apt_2.9.11_arm64.deb ...
Unpacking apt (2.9.11) over (2.9.10) ...
Setting up apt (2.9.11) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 17117 files and directories currently installed.)
Preparing to unpack .../libaudit-common_1%3a4.0.2-2_all.deb ...
Unpacking libaudit-common (1:4.0.2-2) over (1:4.0.1-3) ...
Setting up libaudit-common (1:4.0.2-2) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 17117 files and directories currently installed.)
Preparing to unpack .../libcap-ng0_0.8.5-3+b1_arm64.deb ...
Unpacking libcap-ng0:arm64 (0.8.5-3+b1) over (0.8.5-3) ...
Setting up libcap-ng0:arm64 (0.8.5-3+b1) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 17118 files and directories currently installed.)
Preparing to unpack .../libaudit1_1%3a4.0.2-2_arm64.deb ...
Unpacking libaudit1:arm64 (1:4.0.2-2) over (1:4.0.1-3) ...
Setting up libaudit1:arm64 (1:4.0.2-2) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 17118 files and directories currently installed.)
Preparing to unpack .../0-login_1%3a4.16.0-2+really2.40.2-11_arm64.deb ...
Unpacking login (1:4.16.0-2+really2.40.2-11) over (1:4.16.0-2+really2.40.2-10) ...
Preparing to unpack .../1-login.defs_1%3a4.16.0-5_all.deb ...
Unpacking login.defs (1:4.16.0-5) over (1:4.16.0-4) ...
Preparing to unpack .../2-libsemanage2_3.7-2+b1_arm64.deb ...
Unpacking libsemanage2:arm64 (3.7-2+b1) over (3.7-2) ...
Preparing to unpack .../3-passwd_1%3a4.16.0-5_arm64.deb ...
Unpacking passwd (1:4.16.0-5) over (1:4.16.0-4) ...
Preparing to unpack .../4-dpkg-dev_1.22.12~1.gbp82cafd_all.deb ...
Unpacking dpkg-dev (1.22.12~1.gbp82cafd) over (1.22.11) ...
Preparing to unpack .../5-libdpkg-perl_1.22.12~1.gbp82cafd_all.deb ...
Unpacking libdpkg-perl (1.22.12~1.gbp82cafd) over (1.22.11) ...
Preparing to unpack .../6-libbrotli1_1.1.0-2+b6_arm64.deb ...
Unpacking libbrotli1:arm64 (1.1.0-2+b6) over (1.1.0-2+b5) ...
Preparing to unpack .../7-libglib2.0-0t64_2.82.2-3_arm64.deb ...
Unpacking libglib2.0-0t64:arm64 (2.82.2-3) over (2.82.2-2) ...
Preparing to unpack .../8-libmarkdown2_2.2.7-2.1_arm64.deb ...
Unpacking libmarkdown2:arm64 (2.2.7-2.1) over (2.2.7-2+b1) ...
Preparing to unpack .../9-libxml2_2.12.7+dfsg+really2.9.14-0.2+b1_arm64.deb ...
Unpacking libxml2:arm64 (2.12.7+dfsg+really2.9.14-0.2+b1) over (2.12.7+dfsg+really2.9.14-0.1) ...
Setting up bsdextrautils (2.40.2-11) ...
Setting up login.defs (1:4.16.0-5) ...
Installing new version of config file /etc/login.defs ...
Setting up libbrotli1:arm64 (1.1.0-2+b6) ...
Setting up libglib2.0-0t64:arm64 (2.82.2-3) ...
No schema files found: doing nothing.
Setting up libdpkg-perl (1.22.12~1.gbp82cafd) ...
Setting up mount (2.40.2-11) ...
Setting up libsemanage2:arm64 (3.7-2+b1) ...
Setting up libxml2:arm64 (2.12.7+dfsg+really2.9.14-0.2+b1) ...
Setting up libmarkdown2:arm64 (2.2.7-2.1) ...
Setting up login (1:4.16.0-2+really2.40.2-11) ...
Setting up dpkg-dev (1.22.12~1.gbp82cafd) ...
Setting up passwd (1:4.16.0-5) ...
Processing triggers for man-db (2.13.0-1) ...
Processing triggers for libc-bin (2.40-3) ...
+------------------------------------------------------------------------------+
| Fetch source files |
+------------------------------------------------------------------------------+
Local sources
-------------
/tmp/debusine-fetch-exec-upload-3z63rbfv/libpod-wsdl-perl_0.063-2.dsc exists in /tmp/debusine-fetch-exec-upload-3z63rbfv; copying to chroot
I: NOTICE: Log filtering will replace 'build/libpod-wsdl-perl-zeYBKF/libpod-wsdl-perl-0.063' with '<<PKGBUILDDIR>>'
I: NOTICE: Log filtering will replace 'build/libpod-wsdl-perl-zeYBKF' with '<<BUILDDIR>>'
+------------------------------------------------------------------------------+
| Install package build dependencies |
+------------------------------------------------------------------------------+
Setup apt archive
-----------------
Merged Build-Depends: debhelper-compat (= 13), build-essential, fakeroot, libio-stringy-perl, libtest-xml-perl, libxml-writer-perl, libxml-xpath-perl, perl
Filtered Build-Depends: debhelper-compat (= 13), build-essential, fakeroot, libio-stringy-perl, libtest-xml-perl, libxml-writer-perl, libxml-xpath-perl, perl
dpkg-deb: warning: root directory has unusual owner or group 998:999.
Hint: either pass --root-owner-group, see dpkg-build-api(7) or add an explicit 'Rules-Requires-Root: no' in debian/control.
dpkg-deb: warning: ignoring 1 warning about the control file(s)
dpkg-deb: building package 'sbuild-build-depends-main-dummy' in '/<<RESOLVERDIR>>/apt_archive/sbuild-build-depends-main-dummy.deb'.
Ign:1 copy:/<<RESOLVERDIR>>/apt_archive ./ InRelease
Get:2 copy:/<<RESOLVERDIR>>/apt_archive ./ Release [609 B]
Ign:3 copy:/<<RESOLVERDIR>>/apt_archive ./ Release.gpg
Get:4 copy:/<<RESOLVERDIR>>/apt_archive ./ Sources [720 B]
Get:5 copy:/<<RESOLVERDIR>>/apt_archive ./ Packages [732 B]
Fetched 2061 B in 0s (182 kB/s)
Reading package lists...
Get:1 file:/<<BUILDDIR>>/resolver-tKZ1C4/apt_archive ./ InRelease
Ign:1 file:/<<BUILDDIR>>/resolver-tKZ1C4/apt_archive ./ InRelease
Get:2 file:/<<BUILDDIR>>/resolver-tKZ1C4/apt_archive ./ Release [606 B]
Get:2 file:/<<BUILDDIR>>/resolver-tKZ1C4/apt_archive ./ Release [606 B]
Get:3 file:/<<BUILDDIR>>/resolver-tKZ1C4/apt_archive ./ Release.gpg
Ign:3 file:/<<BUILDDIR>>/resolver-tKZ1C4/apt_archive ./ Release.gpg
Reading package lists...
Reading package lists...
Install main build dependencies (apt-based resolver)
----------------------------------------------------
Installing build dependencies
Reading package lists...
Building dependency tree...
Reading state information...
The following additional packages will be installed:
autoconf automake autopoint autotools-dev build-essential cpp cpp-14
cpp-14-aarch64-linux-gnu cpp-aarch64-linux-gnu debhelper dh-autoreconf
dh-strip-nondeterminism dwz fakeroot g++ g++-14 g++-14-aarch64-linux-gnu
g++-aarch64-linux-gnu gcc gcc-14 gcc-14-aarch64-linux-gnu
gcc-aarch64-linux-gnu libasan8 libc-dev-bin libc6-dev libcc1-0 libcrypt-dev
libdebhelper-perl libelf1t64 libexpat1 libfakeroot
libfile-stripnondeterminism-perl libgcc-14-dev libhwasan0 libio-stringy-perl
libisl23 libitm1 liblsan0 libmpc3 libmpfr6 libstdc++-14-dev libtest-xml-perl
libtool libtsan2 libubsan1 libxml-parser-perl libxml-semanticdiff-perl
libxml-writer-perl libxml-xpath-perl linux-libc-dev m4 po-debconf
rpcsvc-proto
Suggested packages:
autoconf-archive gnu-standards autoconf-doc cpp-doc gcc-14-locales
cpp-14-doc dh-make gcc-14-doc gcc-multilib manpages-dev flex bison gdb
gcc-doc gdb-aarch64-linux-gnu libc-devtools glibc-doc libstdc++-14-doc
libtool-doc gfortran | fortran95-compiler gcj-jdk m4-doc libmail-box-perl
Recommended packages:
manpages manpages-dev libarchive-cpio-perl libxml-sax-writer-perl
libxml-twig-perl libltdl-dev libmail-sendmail-perl
The following NEW packages will be installed:
autoconf automake autopoint autotools-dev build-essential cpp cpp-14
cpp-14-aarch64-linux-gnu cpp-aarch64-linux-gnu debhelper dh-autoreconf
dh-strip-nondeterminism dwz fakeroot g++ g++-14 g++-14-aarch64-linux-gnu
g++-aarch64-linux-gnu gcc gcc-14 gcc-14-aarch64-linux-gnu
gcc-aarch64-linux-gnu libasan8 libc-dev-bin libc6-dev libcc1-0 libcrypt-dev
libdebhelper-perl libelf1t64 libexpat1 libfakeroot
libfile-stripnondeterminism-perl libgcc-14-dev libhwasan0 libio-stringy-perl
libisl23 libitm1 liblsan0 libmpc3 libmpfr6 libstdc++-14-dev libtest-xml-perl
libtool libtsan2 libubsan1 libxml-parser-perl libxml-semanticdiff-perl
libxml-writer-perl libxml-xpath-perl linux-libc-dev m4 po-debconf
rpcsvc-proto sbuild-build-depends-main-dummy
0 upgraded, 54 newly installed, 0 to remove and 0 not upgraded.
Need to get 61.4 MB of archives.
After this operation, 240 MB of additional disk space will be used.
Get:1 copy:/<<RESOLVERDIR>>/apt_archive ./ sbuild-build-depends-main-dummy 0.invalid.0 [924 B]
Get:2 http://deb.debian.org/debian sid/main arm64 m4 arm64 1.4.19-4 [277 kB]
Get:3 http://deb.debian.org/debian sid/main arm64 autoconf all 2.72-3 [493 kB]
Get:4 http://deb.debian.org/debian sid/main arm64 autotools-dev all 20220109.1 [51.6 kB]
Get:5 http://deb.debian.org/debian sid/main arm64 automake all 1:1.16.5-1.3 [823 kB]
Get:6 http://deb.debian.org/debian sid/main arm64 autopoint all 0.22.5-2 [723 kB]
Get:7 http://deb.debian.org/debian sid/main arm64 libc-dev-bin arm64 2.40-3 [50.9 kB]
Get:8 http://deb.debian.org/debian sid/main arm64 linux-libc-dev all 6.11.7-1 [2454 kB]
Get:9 http://deb.debian.org/debian sid/main arm64 libcrypt-dev arm64 1:4.4.36-5 [122 kB]
Get:10 http://deb.debian.org/debian sid/main arm64 rpcsvc-proto arm64 1.4.3-1+b1 [60.5 kB]
Get:11 http://deb.debian.org/debian sid/main arm64 libc6-dev arm64 2.40-3 [1591 kB]
Get:12 http://deb.debian.org/debian sid/main arm64 libisl23 arm64 0.27-1 [601 kB]
Get:13 http://deb.debian.org/debian sid/main arm64 libmpfr6 arm64 4.2.1-1+b2 [680 kB]
Get:14 http://deb.debian.org/debian sid/main arm64 libmpc3 arm64 1.3.1-1+b3 [50.5 kB]
Get:15 http://deb.debian.org/debian sid/main arm64 cpp-14-aarch64-linux-gnu arm64 14.2.0-8 [9166 kB]
Get:16 http://deb.debian.org/debian sid/main arm64 cpp-14 arm64 14.2.0-8 [1284 B]
Get:17 http://deb.debian.org/debian sid/main arm64 cpp-aarch64-linux-gnu arm64 4:14.2.0-1 [4832 B]
Get:18 http://deb.debian.org/debian sid/main arm64 cpp arm64 4:14.2.0-1 [1568 B]
Get:19 http://deb.debian.org/debian sid/main arm64 libcc1-0 arm64 14.2.0-8 [42.2 kB]
Get:20 http://deb.debian.org/debian sid/main arm64 libitm1 arm64 14.2.0-8 [24.2 kB]
Get:21 http://deb.debian.org/debian sid/main arm64 libasan8 arm64 14.2.0-8 [2579 kB]
Get:22 http://deb.debian.org/debian sid/main arm64 liblsan0 arm64 14.2.0-8 [1161 kB]
Get:23 http://deb.debian.org/debian sid/main arm64 libtsan2 arm64 14.2.0-8 [2386 kB]
Get:24 http://deb.debian.org/debian sid/main arm64 libubsan1 arm64 14.2.0-8 [1039 kB]
Get:25 http://deb.debian.org/debian sid/main arm64 libhwasan0 arm64 14.2.0-8 [1442 kB]
Get:26 http://deb.debian.org/debian sid/main arm64 libgcc-14-dev arm64 14.2.0-8 [2365 kB]
Get:27 http://deb.debian.org/debian sid/main arm64 gcc-14-aarch64-linux-gnu arm64 14.2.0-8 [17.7 MB]
Get:28 http://deb.debian.org/debian sid/main arm64 gcc-14 arm64 14.2.0-8 [519 kB]
Get:29 http://deb.debian.org/debian sid/main arm64 gcc-aarch64-linux-gnu arm64 4:14.2.0-1 [1440 B]
Get:30 http://deb.debian.org/debian sid/main arm64 gcc arm64 4:14.2.0-1 [5136 B]
Get:31 http://deb.debian.org/debian sid/main arm64 libstdc++-14-dev arm64 14.2.0-8 [2267 kB]
Get:32 http://deb.debian.org/debian sid/main arm64 g++-14-aarch64-linux-gnu arm64 14.2.0-8 [10.1 MB]
Get:33 http://deb.debian.org/debian sid/main arm64 g++-14 arm64 14.2.0-8 [20.2 kB]
Get:34 http://deb.debian.org/debian sid/main arm64 g++-aarch64-linux-gnu arm64 4:14.2.0-1 [1200 B]
Get:35 http://deb.debian.org/debian sid/main arm64 g++ arm64 4:14.2.0-1 [1332 B]
Get:36 http://deb.debian.org/debian sid/main arm64 build-essential arm64 12.12 [4624 B]
Get:37 http://deb.debian.org/debian sid/main arm64 libdebhelper-perl all 13.20 [89.7 kB]
Get:38 http://deb.debian.org/debian sid/main arm64 libtool all 2.4.7-8 [517 kB]
Get:39 http://deb.debian.org/debian sid/main arm64 dh-autoreconf all 20 [17.1 kB]
Get:40 http://deb.debian.org/debian sid/main arm64 libfile-stripnondeterminism-perl all 1.14.0-1 [19.5 kB]
Get:41 http://deb.debian.org/debian sid/main arm64 dh-strip-nondeterminism all 1.14.0-1 [8448 B]
Get:42 http://deb.debian.org/debian sid/main arm64 libelf1t64 arm64 0.192-4 [189 kB]
Get:43 http://deb.debian.org/debian sid/main arm64 dwz arm64 0.15-1+b1 [102 kB]
Get:44 http://deb.debian.org/debian sid/main arm64 po-debconf all 1.0.21+nmu1 [248 kB]
Get:45 http://deb.debian.org/debian sid/main arm64 debhelper all 13.20 [915 kB]
Get:46 http://deb.debian.org/debian sid/main arm64 libfakeroot arm64 1.36-1 [29.1 kB]
Get:47 http://deb.debian.org/debian sid/main arm64 fakeroot arm64 1.36-1 [74.4 kB]
Get:48 http://deb.debian.org/debian sid/main arm64 libexpat1 arm64 2.6.4-1 [90.7 kB]
Get:49 http://deb.debian.org/debian sid/main arm64 libio-stringy-perl all 2.113-2 [48.3 kB]
Get:50 http://deb.debian.org/debian sid/main arm64 libxml-parser-perl arm64 2.47-1+b3 [197 kB]
Get:51 http://deb.debian.org/debian sid/main arm64 libxml-semanticdiff-perl all 1.0007-2 [29.9 kB]
Get:52 http://deb.debian.org/debian sid/main arm64 libtest-xml-perl all 0.08-4 [21.0 kB]
Get:53 http://deb.debian.org/debian sid/main arm64 libxml-writer-perl all 0.900-2 [26.8 kB]
Get:54 http://deb.debian.org/debian sid/main arm64 libxml-xpath-perl all 1.48-1 [71.0 kB]
debconf: delaying package configuration, since apt-utils is not installed
Fetched 61.4 MB in 1s (80.6 MB/s)
Selecting previously unselected package m4.
(Reading database ... 17119 files and directories currently installed.)
Preparing to unpack .../00-m4_1.4.19-4_arm64.deb ...
Unpacking m4 (1.4.19-4) ...
Selecting previously unselected package autoconf.
Preparing to unpack .../01-autoconf_2.72-3_all.deb ...
Unpacking autoconf (2.72-3) ...
Selecting previously unselected package autotools-dev.
Preparing to unpack .../02-autotools-dev_20220109.1_all.deb ...
Unpacking autotools-dev (20220109.1) ...
Selecting previously unselected package automake.
Preparing to unpack .../03-automake_1%3a1.16.5-1.3_all.deb ...
Unpacking automake (1:1.16.5-1.3) ...
Selecting previously unselected package autopoint.
Preparing to unpack .../04-autopoint_0.22.5-2_all.deb ...
Unpacking autopoint (0.22.5-2) ...
Selecting previously unselected package libc-dev-bin.
Preparing to unpack .../05-libc-dev-bin_2.40-3_arm64.deb ...
Unpacking libc-dev-bin (2.40-3) ...
Selecting previously unselected package linux-libc-dev.
Preparing to unpack .../06-linux-libc-dev_6.11.7-1_all.deb ...
Unpacking linux-libc-dev (6.11.7-1) ...
Selecting previously unselected package libcrypt-dev:arm64.
Preparing to unpack .../07-libcrypt-dev_1%3a4.4.36-5_arm64.deb ...
Unpacking libcrypt-dev:arm64 (1:4.4.36-5) ...
Selecting previously unselected package rpcsvc-proto.
Preparing to unpack .../08-rpcsvc-proto_1.4.3-1+b1_arm64.deb ...
Unpacking rpcsvc-proto (1.4.3-1+b1) ...
Selecting previously unselected package libc6-dev:arm64.
Preparing to unpack .../09-libc6-dev_2.40-3_arm64.deb ...
Unpacking libc6-dev:arm64 (2.40-3) ...
Selecting previously unselected package libisl23:arm64.
Preparing to unpack .../10-libisl23_0.27-1_arm64.deb ...
Unpacking libisl23:arm64 (0.27-1) ...
Selecting previously unselected package libmpfr6:arm64.
Preparing to unpack .../11-libmpfr6_4.2.1-1+b2_arm64.deb ...
Unpacking libmpfr6:arm64 (4.2.1-1+b2) ...
Selecting previously unselected package libmpc3:arm64.
Preparing to unpack .../12-libmpc3_1.3.1-1+b3_arm64.deb ...
Unpacking libmpc3:arm64 (1.3.1-1+b3) ...
Selecting previously unselected package cpp-14-aarch64-linux-gnu.
Preparing to unpack .../13-cpp-14-aarch64-linux-gnu_14.2.0-8_arm64.deb ...
Unpacking cpp-14-aarch64-linux-gnu (14.2.0-8) ...
Selecting previously unselected package cpp-14.
Preparing to unpack .../14-cpp-14_14.2.0-8_arm64.deb ...
Unpacking cpp-14 (14.2.0-8) ...
Selecting previously unselected package cpp-aarch64-linux-gnu.
Preparing to unpack .../15-cpp-aarch64-linux-gnu_4%3a14.2.0-1_arm64.deb ...
Unpacking cpp-aarch64-linux-gnu (4:14.2.0-1) ...
Selecting previously unselected package cpp.
Preparing to unpack .../16-cpp_4%3a14.2.0-1_arm64.deb ...
Unpacking cpp (4:14.2.0-1) ...
Selecting previously unselected package libcc1-0:arm64.
Preparing to unpack .../17-libcc1-0_14.2.0-8_arm64.deb ...
Unpacking libcc1-0:arm64 (14.2.0-8) ...
Selecting previously unselected package libitm1:arm64.
Preparing to unpack .../18-libitm1_14.2.0-8_arm64.deb ...
Unpacking libitm1:arm64 (14.2.0-8) ...
Selecting previously unselected package libasan8:arm64.
Preparing to unpack .../19-libasan8_14.2.0-8_arm64.deb ...
Unpacking libasan8:arm64 (14.2.0-8) ...
Selecting previously unselected package liblsan0:arm64.
Preparing to unpack .../20-liblsan0_14.2.0-8_arm64.deb ...
Unpacking liblsan0:arm64 (14.2.0-8) ...
Selecting previously unselected package libtsan2:arm64.
Preparing to unpack .../21-libtsan2_14.2.0-8_arm64.deb ...
Unpacking libtsan2:arm64 (14.2.0-8) ...
Selecting previously unselected package libubsan1:arm64.
Preparing to unpack .../22-libubsan1_14.2.0-8_arm64.deb ...
Unpacking libubsan1:arm64 (14.2.0-8) ...
Selecting previously unselected package libhwasan0:arm64.
Preparing to unpack .../23-libhwasan0_14.2.0-8_arm64.deb ...
Unpacking libhwasan0:arm64 (14.2.0-8) ...
Selecting previously unselected package libgcc-14-dev:arm64.
Preparing to unpack .../24-libgcc-14-dev_14.2.0-8_arm64.deb ...
Unpacking libgcc-14-dev:arm64 (14.2.0-8) ...
Selecting previously unselected package gcc-14-aarch64-linux-gnu.
Preparing to unpack .../25-gcc-14-aarch64-linux-gnu_14.2.0-8_arm64.deb ...
Unpacking gcc-14-aarch64-linux-gnu (14.2.0-8) ...
Selecting previously unselected package gcc-14.
Preparing to unpack .../26-gcc-14_14.2.0-8_arm64.deb ...
Unpacking gcc-14 (14.2.0-8) ...
Selecting previously unselected package gcc-aarch64-linux-gnu.
Preparing to unpack .../27-gcc-aarch64-linux-gnu_4%3a14.2.0-1_arm64.deb ...
Unpacking gcc-aarch64-linux-gnu (4:14.2.0-1) ...
Selecting previously unselected package gcc.
Preparing to unpack .../28-gcc_4%3a14.2.0-1_arm64.deb ...
Unpacking gcc (4:14.2.0-1) ...
Selecting previously unselected package libstdc++-14-dev:arm64.
Preparing to unpack .../29-libstdc++-14-dev_14.2.0-8_arm64.deb ...
Unpacking libstdc++-14-dev:arm64 (14.2.0-8) ...
Selecting previously unselected package g++-14-aarch64-linux-gnu.
Preparing to unpack .../30-g++-14-aarch64-linux-gnu_14.2.0-8_arm64.deb ...
Unpacking g++-14-aarch64-linux-gnu (14.2.0-8) ...
Selecting previously unselected package g++-14.
Preparing to unpack .../31-g++-14_14.2.0-8_arm64.deb ...
Unpacking g++-14 (14.2.0-8) ...
Selecting previously unselected package g++-aarch64-linux-gnu.
Preparing to unpack .../32-g++-aarch64-linux-gnu_4%3a14.2.0-1_arm64.deb ...
Unpacking g++-aarch64-linux-gnu (4:14.2.0-1) ...
Selecting previously unselected package g++.
Preparing to unpack .../33-g++_4%3a14.2.0-1_arm64.deb ...
Unpacking g++ (4:14.2.0-1) ...
Selecting previously unselected package build-essential.
Preparing to unpack .../34-build-essential_12.12_arm64.deb ...
Unpacking build-essential (12.12) ...
Selecting previously unselected package libdebhelper-perl.
Preparing to unpack .../35-libdebhelper-perl_13.20_all.deb ...
Unpacking libdebhelper-perl (13.20) ...
Selecting previously unselected package libtool.
Preparing to unpack .../36-libtool_2.4.7-8_all.deb ...
Unpacking libtool (2.4.7-8) ...
Selecting previously unselected package dh-autoreconf.
Preparing to unpack .../37-dh-autoreconf_20_all.deb ...
Unpacking dh-autoreconf (20) ...
Selecting previously unselected package libfile-stripnondeterminism-perl.
Preparing to unpack .../38-libfile-stripnondeterminism-perl_1.14.0-1_all.deb ...
Unpacking libfile-stripnondeterminism-perl (1.14.0-1) ...
Selecting previously unselected package dh-strip-nondeterminism.
Preparing to unpack .../39-dh-strip-nondeterminism_1.14.0-1_all.deb ...
Unpacking dh-strip-nondeterminism (1.14.0-1) ...
Selecting previously unselected package libelf1t64:arm64.
Preparing to unpack .../40-libelf1t64_0.192-4_arm64.deb ...
Unpacking libelf1t64:arm64 (0.192-4) ...
Selecting previously unselected package dwz.
Preparing to unpack .../41-dwz_0.15-1+b1_arm64.deb ...
Unpacking dwz (0.15-1+b1) ...
Selecting previously unselected package po-debconf.
Preparing to unpack .../42-po-debconf_1.0.21+nmu1_all.deb ...
Unpacking po-debconf (1.0.21+nmu1) ...
Selecting previously unselected package debhelper.
Preparing to unpack .../43-debhelper_13.20_all.deb ...
Unpacking debhelper (13.20) ...
Selecting previously unselected package libfakeroot:arm64.
Preparing to unpack .../44-libfakeroot_1.36-1_arm64.deb ...
Unpacking libfakeroot:arm64 (1.36-1) ...
Selecting previously unselected package fakeroot.
Preparing to unpack .../45-fakeroot_1.36-1_arm64.deb ...
Unpacking fakeroot (1.36-1) ...
Selecting previously unselected package libexpat1:arm64.
Preparing to unpack .../46-libexpat1_2.6.4-1_arm64.deb ...
Unpacking libexpat1:arm64 (2.6.4-1) ...
Selecting previously unselected package libio-stringy-perl.
Preparing to unpack .../47-libio-stringy-perl_2.113-2_all.deb ...
Unpacking libio-stringy-perl (2.113-2) ...
Selecting previously unselected package libxml-parser-perl.
Preparing to unpack .../48-libxml-parser-perl_2.47-1+b3_arm64.deb ...
Unpacking libxml-parser-perl (2.47-1+b3) ...
Selecting previously unselected package libxml-semanticdiff-perl.
Preparing to unpack .../49-libxml-semanticdiff-perl_1.0007-2_all.deb ...
Unpacking libxml-semanticdiff-perl (1.0007-2) ...
Selecting previously unselected package libtest-xml-perl.
Preparing to unpack .../50-libtest-xml-perl_0.08-4_all.deb ...
Unpacking libtest-xml-perl (0.08-4) ...
Selecting previously unselected package libxml-writer-perl.
Preparing to unpack .../51-libxml-writer-perl_0.900-2_all.deb ...
Unpacking libxml-writer-perl (0.900-2) ...
Selecting previously unselected package libxml-xpath-perl.
Preparing to unpack .../52-libxml-xpath-perl_1.48-1_all.deb ...
Unpacking libxml-xpath-perl (1.48-1) ...
Selecting previously unselected package sbuild-build-depends-main-dummy.
Preparing to unpack .../53-sbuild-build-depends-main-dummy_0.invalid.0_arm64.deb ...
Unpacking sbuild-build-depends-main-dummy (0.invalid.0) ...
Setting up libexpat1:arm64 (2.6.4-1) ...
Setting up libfile-stripnondeterminism-perl (1.14.0-1) ...
Setting up libxml-parser-perl (2.47-1+b3) ...
Setting up libxml-semanticdiff-perl (1.0007-2) ...
Setting up libio-stringy-perl (2.113-2) ...
Setting up po-debconf (1.0.21+nmu1) ...
Setting up libdebhelper-perl (13.20) ...
Setting up linux-libc-dev (6.11.7-1) ...
Setting up m4 (1.4.19-4) ...
Setting up libxml-xpath-perl (1.48-1) ...
Setting up libfakeroot:arm64 (1.36-1) ...
Setting up libelf1t64:arm64 (0.192-4) ...
Setting up fakeroot (1.36-1) ...
update-alternatives: using /usr/bin/fakeroot-sysv to provide /usr/bin/fakeroot (fakeroot) in auto mode
Setting up autotools-dev (20220109.1) ...
Setting up rpcsvc-proto (1.4.3-1+b1) ...
Setting up libmpfr6:arm64 (4.2.1-1+b2) ...
Setting up libxml-writer-perl (0.900-2) ...
Setting up libmpc3:arm64 (1.3.1-1+b3) ...
Setting up autopoint (0.22.5-2) ...
Setting up autoconf (2.72-3) ...
Setting up libubsan1:arm64 (14.2.0-8) ...
Setting up dh-strip-nondeterminism (1.14.0-1) ...
Setting up dwz (0.15-1+b1) ...
Setting up libhwasan0:arm64 (14.2.0-8) ...
Setting up libcrypt-dev:arm64 (1:4.4.36-5) ...
Setting up libasan8:arm64 (14.2.0-8) ...
Setting up libtsan2:arm64 (14.2.0-8) ...
Setting up libisl23:arm64 (0.27-1) ...
Setting up libtest-xml-perl (0.08-4) ...
Setting up libc-dev-bin (2.40-3) ...
Setting up libcc1-0:arm64 (14.2.0-8) ...
Setting up liblsan0:arm64 (14.2.0-8) ...
Setting up libitm1:arm64 (14.2.0-8) ...
Setting up automake (1:1.16.5-1.3) ...
update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode
Setting up cpp-14-aarch64-linux-gnu (14.2.0-8) ...
Setting up libc6-dev:arm64 (2.40-3) ...
Setting up libgcc-14-dev:arm64 (14.2.0-8) ...
Setting up libstdc++-14-dev:arm64 (14.2.0-8) ...
Setting up cpp-aarch64-linux-gnu (4:14.2.0-1) ...
Setting up cpp-14 (14.2.0-8) ...
Setting up cpp (4:14.2.0-1) ...
Setting up gcc-14-aarch64-linux-gnu (14.2.0-8) ...
Setting up gcc-aarch64-linux-gnu (4:14.2.0-1) ...
Setting up g++-14-aarch64-linux-gnu (14.2.0-8) ...
Setting up gcc-14 (14.2.0-8) ...
Setting up g++-aarch64-linux-gnu (4:14.2.0-1) ...
Setting up g++-14 (14.2.0-8) ...
Setting up libtool (2.4.7-8) ...
Setting up gcc (4:14.2.0-1) ...
Setting up dh-autoreconf (20) ...
Setting up g++ (4:14.2.0-1) ...
update-alternatives: using /usr/bin/g++ to provide /usr/bin/c++ (c++) in auto mode
Setting up build-essential (12.12) ...
Setting up debhelper (13.20) ...
Setting up sbuild-build-depends-main-dummy (0.invalid.0) ...
Processing triggers for man-db (2.13.0-1) ...
Processing triggers for libc-bin (2.40-3) ...
+------------------------------------------------------------------------------+
| Check architectures |
+------------------------------------------------------------------------------+
Arch check ok (arm64 included in all)
+------------------------------------------------------------------------------+
| Build environment |
+------------------------------------------------------------------------------+
Kernel: Linux 6.1.0-27-cloud-arm64 #1 SMP Debian 6.1.115-1 (2024-11-01) arm64 (aarch64)
Toolchain package versions: binutils_2.43.1-5 dpkg-dev_1.22.12~1.gbp82cafd g++-14_14.2.0-8 gcc-14_14.2.0-8 libc6-dev_2.40-3 libstdc++-14-dev_14.2.0-8 libstdc++6_14.2.0-8 linux-libc-dev_6.11.7-1
Package versions: appstream_1.0.3-1+b1 apt_2.9.11 autoconf_2.72-3 automake_1:1.16.5-1.3 autopoint_0.22.5-2 autotools-dev_20220109.1 base-files_13.5 base-passwd_3.6.5 bash_5.2.32-1+b2 binutils_2.43.1-5 binutils-aarch64-linux-gnu_2.43.1-5 binutils-common_2.43.1-5 bsdextrautils_2.40.2-11 bsdutils_1:2.40.2-11 build-essential_12.12 bzip2_1.0.8-6 ca-certificates_20240203 coreutils_9.5-1+b1 cpp_4:14.2.0-1 cpp-14_14.2.0-8 cpp-14-aarch64-linux-gnu_14.2.0-8 cpp-aarch64-linux-gnu_4:14.2.0-1 dash_0.5.12-9+b1 debconf_1.5.87 debhelper_13.20 debian-archive-keyring_2023.4 debianutils_5.21 dh-autoreconf_20 dh-strip-nondeterminism_1.14.0-1 diffstat_1.66-1+b1 diffutils_1:3.10-1+b1 dpkg_1.22.12~1.gbp82cafd dpkg-dev_1.22.12~1.gbp82cafd dwz_0.15-1+b1 e2fsprogs_1.47.1-1+b1 fakeroot_1.36-1 file_1:5.45-3+b1 findutils_4.10.0-3 g++_4:14.2.0-1 g++-14_14.2.0-8 g++-14-aarch64-linux-gnu_14.2.0-8 g++-aarch64-linux-gnu_4:14.2.0-1 gcc_4:14.2.0-1 gcc-14_14.2.0-8 gcc-14-aarch64-linux-gnu_14.2.0-8 gcc-14-base_14.2.0-8 gcc-aarch64-linux-gnu_4:14.2.0-1 gettext_0.22.5-2 gettext-base_0.22.5-2 gpg_2.2.45-2 gpgconf_2.2.45-2 gpgv_2.2.45-2 grep_3.11-4+b1 groff-base_1.23.0-5 gzip_1.12-1.1+b1 hostname_3.25 init-system-helpers_1.67 intltool-debian_0.35.0+20060710.6 iso-codes_4.17.0-1 libacl1_2.3.2-2+b1 libaliased-perl_0.34-3 libappstream5_1.0.3-1+b1 libapt-pkg-perl_0.1.40+b6 libapt-pkg6.0t64_2.9.11 libarchive-zip-perl_1.68-1 libasan8_14.2.0-8 libassuan9_3.0.1-2 libatomic1_14.2.0-8 libattr1_1:2.5.2-2 libaudit-common_1:4.0.2-2 libaudit1_1:4.0.2-2 libb-hooks-endofscope-perl_0.28-1 libb-hooks-op-check-perl_0.22-3+b2 libberkeleydb-perl_0.66-1 libbinutils_2.43.1-5 libblkid1_2.40.2-11 libbrotli1_1.1.0-2+b6 libbsd0_0.12.2-2 libbz2-1.0_1.0.8-6 libc-bin_2.40-3 libc-dev-bin_2.40-3 libc6_2.40-3 libc6-dev_2.40-3 libcap-ng0_0.8.5-3+b1 libcap2_1:2.66-5+b1 libcapture-tiny-perl_0.48-2 libcc1-0_14.2.0-8 libcgi-pm-perl_4.66-1 libclass-data-inheritable-perl_0.10-1 libclass-inspector-perl_1.36-3 libclass-method-modifiers-perl_2.15-1 libclass-xsaccessor-perl_1.19-4+b4 libclone-perl_0.47-1+b1 libcom-err2_1.47.1-1+b1 libconfig-tiny-perl_2.30-1 libconst-fast-perl_0.014-2 libcpanel-json-xs-perl_4.38-1+b1 libcrypt-dev_1:4.4.36-5 libcrypt1_1:4.4.36-5 libctf-nobfd0_2.43.1-5 libctf0_2.43.1-5 libcurl3t64-gnutls_8.11.0-1 libdata-dpath-perl_0.60-1 libdata-messagepack-perl_1.02-1+b4 libdata-optlist-perl_0.114-1 libdata-validate-domain-perl_0.15-1 libdata-validate-ip-perl_0.31-1 libdata-validate-uri-perl_0.07-3 libdb5.3t64_5.3.28+dfsg2-9 libdebconfclient0_0.273 libdebhelper-perl_13.20 libdevel-callchecker-perl_0.009-1+b1 libdevel-size-perl_0.84-1+b1 libdevel-stacktrace-perl_2.0500-1 libdpkg-perl_1.22.12~1.gbp82cafd libdynaloader-functions-perl_0.004-1 libelf1t64_0.192-4 libemail-address-xs-perl_1.05-1+b4 libencode-locale-perl_1.05-3 libexception-class-perl_1.45-1 libexpat1_2.6.4-1 libext2fs2t64_1.47.1-1+b1 libfakeroot_1.36-1 libffi8_3.4.6-1 libfile-basedir-perl_0.09-2 libfile-find-rule-perl_0.34-3 libfile-listing-perl_6.16-1 libfile-sharedir-perl_1.118-3 libfile-stripnondeterminism-perl_1.14.0-1 libfont-ttf-perl_1.06-2 libgcc-14-dev_14.2.0-8 libgcc-s1_14.2.0-8 libgcrypt20_1.11.0-6 libgdbm-compat4t64_1.24-2 libgdbm6t64_1.24-2 libglib2.0-0t64_2.82.2-3 libgmp10_2:6.3.0+dfsg-2+b2 libgnutls30t64_3.8.8-2 libgomp1_14.2.0-8 libgpg-error0_1.50-4 libgprofng0_2.43.1-5 libgssapi-krb5-2_1.21.3-3 libhogweed6t64_3.10-1+b1 libhtml-form-perl_6.12-1 libhtml-html5-entities-perl_0.004-3 libhtml-parser-perl_3.83-1+b1 libhtml-tagset-perl_3.24-1 libhtml-tokeparser-simple-perl_3.16-4 libhtml-tree-perl_5.07-3 libhttp-cookies-perl_6.11-1 libhttp-date-perl_6.06-1 libhttp-message-perl_7.00-2 libhttp-negotiate-perl_6.01-2 libhwasan0_14.2.0-8 libicu72_72.1-5+b1 libidn2-0_2.3.7-2+b1 libimport-into-perl_1.002005-2 libio-html-perl_1.004-3 libio-interactive-perl_1.025-1 libio-socket-ssl-perl_2.089-1 libio-string-perl_1.08-4 libio-stringy-perl_2.113-2 libipc-run3-perl_0.049-1 libipc-system-simple-perl_1.30-2 libisl23_0.27-1 libiterator-perl_0.03+ds1-2 libiterator-util-perl_0.02+ds1-2 libitm1_14.2.0-8 libjansson4_2.14-2+b3 libjson-maybexs-perl_1.004008-1 libk5crypto3_1.21.3-3 libkeyutils1_1.6.3-4 libkrb5-3_1.21.3-3 libkrb5support0_1.21.3-3 libldap-2.5-0_2.5.18+dfsg-3+b1 liblist-compare-perl_0.55-2 liblist-someutils-perl_0.59-1 liblist-utilsby-perl_0.12-2 liblsan0_14.2.0-8 liblwp-mediatypes-perl_6.04-2 liblwp-protocol-https-perl_6.14-1 liblz1_1.15~pre2-1 liblz4-1_1.9.4-3+b1 liblzma5_5.6.3-1+b1 liblzo2-2_2.10-3+b1 libmagic-mgc_1:5.45-3+b1 libmagic1t64_1:5.45-3+b1 libmarkdown2_2.2.7-2.1 libmd0_1.1.0-2+b1 libmldbm-perl_2.05-4 libmodule-implementation-perl_0.09-2 libmodule-runtime-perl_0.016-2 libmoo-perl_2.005005-1 libmoox-aliases-perl_0.001006-2 libmount1_2.40.2-11 libmouse-perl_2.5.11-1+b1 libmpc3_1.3.1-1+b3 libmpfr6_4.2.1-1+b2 libnamespace-clean-perl_0.27-2 libnet-domain-tld-perl_1.75-4 libnet-http-perl_6.23-1 libnet-ipv6addr-perl_1.02-1 libnet-netmask-perl_2.0002-2 libnet-ssleay-perl_1.94-2 libnetaddr-ip-perl_4.079+dfsg-2+b4 libnettle8t64_3.10-1+b1 libnghttp2-14_1.64.0-1 libnghttp3-9_1.4.0-1+b1 libngtcp2-16_1.6.0-1 libngtcp2-crypto-gnutls8_1.6.0-1 libnumber-compare-perl_0.03-3 libp11-kit0_0.25.5-2+b1 libpackage-stash-perl_0.40-1 libpam-modules_1.5.3-7+b1 libpam-modules-bin_1.5.3-7+b1 libpam-runtime_1.5.3-7 libpam0g_1.5.3-7+b1 libparams-classify-perl_0.015-2+b4 libparams-util-perl_1.102-3+b1 libpath-tiny-perl_0.146-1 libpcre2-8-0_10.44-4 libperl5.40_5.40.0-7 libperlio-gzip-perl_0.20-1+b4 libperlio-utf8-strict-perl_0.010-1+b3 libpipeline1_1.5.8-1 libproc-processtable-perl_0.636-1+b3 libpsl5t64_0.21.2-1.1+b1 libreadline8t64_8.2-5 libregexp-wildcards-perl_1.05-3 librole-tiny-perl_2.002004-1 librtmp1_2.4+20151223.gitfa8646d.1-2+b5 libsasl2-2_2.1.28+dfsg1-8 libsasl2-modules-db_2.1.28+dfsg1-8 libseccomp2_2.5.5-1+b3 libselinux1_3.7-3+b1 libsemanage-common_3.7-2 libsemanage2_3.7-2+b1 libsepol2_3.7-1 libsereal-decoder-perl_5.004+ds-1+b3 libsereal-encoder-perl_5.004+ds-1+b3 libsframe1_2.43.1-5 libsmartcols1_2.40.2-11 libsort-versions-perl_1.62-3 libsqlite3-0_3.46.1-1 libss2_1.47.1-1+b1 libssh2-1t64_1.11.1-1 libssl3t64_3.3.2-2 libstdc++-14-dev_14.2.0-8 libstdc++6_14.2.0-8 libstemmer0d_2.2.0-4+b2 libstrictures-perl_2.000006-1 libsub-exporter-perl_0.990-1 libsub-exporter-progressive-perl_0.001013-3 libsub-identify-perl_0.14-3+b3 libsub-install-perl_0.929-1 libsub-name-perl_0.27-1+b3 libsub-quote-perl_2.006008-1 libsyntax-keyword-try-perl_0.30-1+b1 libsystemd0_257~rc2-3 libtasn1-6_4.19.0-3+b3 libterm-readkey-perl_2.38-2+b4 libtest-xml-perl_0.08-4 libtext-glob-perl_0.11-3 libtext-levenshteinxs-perl_0.03-5+b4 libtext-markdown-discount-perl_0.16-1+b3 libtext-xslate-perl_3.5.9-2+b1 libtime-duration-perl_1.21-2 libtime-moment-perl_0.44-2+b4 libtimedate-perl_2.3300-2 libtinfo6_6.5-2+b1 libtool_2.4.7-8 libtry-tiny-perl_0.32-1 libtsan2_14.2.0-8 libubsan1_14.2.0-8 libuchardet0_0.0.8-1+b2 libudev1_257~rc2-3 libunicode-utf8-perl_0.62-2+b3 libunistring5_1.2-1+b1 liburi-perl_5.30-1 libuuid1_2.40.2-11 libvariable-magic-perl_0.64-1+b1 libwww-mechanize-perl_2.19-1 libwww-perl_6.77-1 libwww-robotrules-perl_6.02-1 libxml-libxml-perl_2.0207+dfsg+really+2.0134-5+b1 libxml-namespacesupport-perl_1.12-2 libxml-parser-perl_2.47-1+b3 libxml-sax-base-perl_1.09-3 libxml-sax-perl_1.02+dfsg-3 libxml-semanticdiff-perl_1.0007-2 libxml-writer-perl_0.900-2 libxml-xpath-perl_1.48-1 libxml2_2.12.7+dfsg+really2.9.14-0.2+b1 libxmlb2_0.3.21-1 libxs-parse-keyword-perl_0.46-1+b1 libxxhash0_0.8.2-2+b2 libyaml-0-2_0.2.5-1+b2 libyaml-libyaml-perl_0.902.0+ds-2+b1 libzstd1_1.5.6+dfsg-1+b1 lintian_2.120.0 linux-libc-dev_6.11.7-1 login_1:4.16.0-2+really2.40.2-11 login.defs_1:4.16.0-5 logsave_1.47.1-1+b1 lzop_1.04-2+b1 m4_1.4.19-4 make_4.3-4.1+b1 man-db_2.13.0-1 mawk_1.3.4.20240905-1 mount_2.40.2-11 ncurses-base_6.5-2 ncurses-bin_6.5-2+b1 netbase_6.4 openssl_3.3.2-2 openssl-provider-legacy_3.3.2-2 passwd_1:4.16.0-5 patch_2.7.6-7+b1 patchutils_0.4.2-1+b1 perl_5.40.0-7 perl-base_5.40.0-7 perl-modules-5.40_5.40.0-7 perl-openssl-defaults_7+b2 plzip_1.11-2 po-debconf_1.0.21+nmu1 readline-common_8.2-5 rpcsvc-proto_1.4.3-1+b1 sbuild-build-depends-main-dummy_0.invalid.0 sed_4.9-2+b1 sensible-utils_0.0.24 shared-mime-info_2.4-5+b1 sysvinit-utils_3.11-1 t1utils_1.41-4+b1 tar_1.35+dfsg-3+b1 tzdata_2024b-3 ucf_3.0043+nmu1 unzip_6.0-28+b1 util-linux_2.40.2-11 xz-utils_5.6.3-1+b1 zlib1g_1:1.3.dfsg+really1.3.1-1+b1
+------------------------------------------------------------------------------+
| Build |
+------------------------------------------------------------------------------+
Unpack source
-------------
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA512
Format: 3.0 (quilt)
Source: libpod-wsdl-perl
Binary: libpod-wsdl-perl
Architecture: all
Version: 0.063-2
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Homepage: https://metacpan.org/release/Pod-WSDL
Standards-Version: 3.9.6
Vcs-Browser: https://salsa.debian.org/perl-team/modules/packages/libpod-wsdl-perl
Vcs-Git: https://salsa.debian.org/perl-team/modules/packages/libpod-wsdl-perl.git
Testsuite: autopkgtest-pkg-perl
Build-Depends: debhelper-compat (= 13)
Build-Depends-Indep: libio-stringy-perl, libtest-xml-perl, libxml-writer-perl, libxml-xpath-perl, perl
Package-List:
libpod-wsdl-perl deb perl optional arch=all
Checksums-Sha1:
99ec74a429dca509149cf1a860cb9b2e512cc987 32692 libpod-wsdl-perl_0.063.orig.tar.gz
d1c3087a9b28a1aa7b17b8673d3420d36b3b506e 2520 libpod-wsdl-perl_0.063-2.debian.tar.xz
Checksums-Sha256:
b58ba026a4685f110cc937da33d39aa9aecf3eae63489a13ed38bec45048d929 32692 libpod-wsdl-perl_0.063.orig.tar.gz
36ff4cdeb691839255e1aab45bcecc62c8844c08b2d476bf5c38a218575ba660 2520 libpod-wsdl-perl_0.063-2.debian.tar.xz
Files:
6f073e75aa7d9a4b7fc9cf606268b370 32692 libpod-wsdl-perl_0.063.orig.tar.gz
00f65d8d966080f53a4890f9581341bd 2520 libpod-wsdl-perl_0.063-2.debian.tar.xz
-----BEGIN PGP SIGNATURE-----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=yqFw
-----END PGP SIGNATURE-----
gpgv: Signature made Thu Jun 16 23:24:02 2022 UTC
gpgv: using RSA key B23862C415D6565A4E86CBD7579C160D4C9E23E8
gpgv: Can't check signature: No public key
dpkg-source: warning: cannot verify inline signature for ./libpod-wsdl-perl_0.063-2.dsc: no acceptable signature found
dpkg-source: info: extracting libpod-wsdl-perl in /<<PKGBUILDDIR>>
dpkg-source: info: unpacking libpod-wsdl-perl_0.063.orig.tar.gz
dpkg-source: info: unpacking libpod-wsdl-perl_0.063-2.debian.tar.xz
Check disk space
----------------
Sufficient free space for build
User Environment
----------------
APT_CONFIG=/var/lib/sbuild/apt.conf
HOME=/sbuild-nonexistent
LANG=en_US.UTF-8
LC_ALL=C.UTF-8
LOGNAME=debusine-worker
PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games
SHELL=/bin/sh
USER=debusine-worker
dpkg-buildpackage
-----------------
Command: dpkg-buildpackage -us -uc -b -rfakeroot
dpkg-buildpackage: info: source package libpod-wsdl-perl
dpkg-buildpackage: info: source version 0.063-2
dpkg-buildpackage: info: source distribution unstable
dpkg-buildpackage: info: source changed by Jelmer Vernooij <jelmer@debian.org>
dpkg-source --before-build .
dpkg-buildpackage: info: host architecture arm64
debian/rules clean
dh clean
dh_clean
debian/rules binary
dh binary
dh_update_autotools_config
dh_autoreconf
dh_auto_configure
/usr/bin/perl Makefile.PL INSTALLDIRS=vendor "OPTIMIZE=-g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wdate-time -D_FORTIFY_SOURCE=2" "LD=aarch64-linux-gnu-gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wl,-z,relro"
Checking if your kit is complete...
Looks good
Generating a Unix-style Makefile
Writing Makefile for Pod::WSDL
Writing MYMETA.yml and MYMETA.json
dh_auto_build
make -j8
make[1]: Entering directory '/<<PKGBUILDDIR>>'
cp lib/Pod/WSDL/Fault.pm blib/lib/Pod/WSDL/Fault.pm
cp lib/Pod/WSDL.pm blib/lib/Pod/WSDL.pm
cp lib/Pod/WSDL/Return.pm blib/lib/Pod/WSDL/Return.pm
cp lib/Pod/WSDL/Writer.pm blib/lib/Pod/WSDL/Writer.pm
cp lib/Pod/WSDL/AUTOLOAD.pm blib/lib/Pod/WSDL/AUTOLOAD.pm
cp lib/Pod/WSDL/Doc.pm blib/lib/Pod/WSDL/Doc.pm
cp lib/Pod/WSDL/Param.pm blib/lib/Pod/WSDL/Param.pm
cp lib/Pod/WSDL/Method.pm blib/lib/Pod/WSDL/Method.pm
cp lib/Pod/WSDL/Attr.pm blib/lib/Pod/WSDL/Attr.pm
cp lib/Pod/WSDL/Utils.pm blib/lib/Pod/WSDL/Utils.pm
cp lib/Pod/WSDL/Type.pm blib/lib/Pod/WSDL/Type.pm
Manifying 11 pod documents
make[1]: Leaving directory '/<<PKGBUILDDIR>>'
dh_auto_test
make -j8 test TEST_VERBOSE=1
make[1]: Entering directory '/<<PKGBUILDDIR>>'
PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t
t/01AUTOLOAD01basic.t .............
1..3
ok 1 - "_bar" retrievable with "bar".
ok 2 - "_bar" settable with "bar".
ok 3 - Using method not equivalent to any attribute croaks
ok
t/01AUTOLOAD02forbiddenmethods.t ..
1..9
ok 1 - Both forbidden: Using getter croaks
ok 2 - Both forbidden: Using setter croaks
ok 3 - Setter forbidden: Using getter does not croak
ok 4 - Setter forbidden: Using setter croaks
ok 5 - Getter forbidden: Using getter croaks
ok 6 - Getter forbidden: Using setter does not croak
ok 7 - Nothing forbidden: Using getter does not croak
ok 8 - Nothing forbidden: Using setter does not croak
ok 9 - Calling accessors from within package does not croak
ok
t/02Utils01basic.t ................
1..5
ok 1 - use Pod::WSDL::Utils;
ok 2 - getTypeDescr() returns simple scalar type correctly
ok 3 - getTypeDescr() returns simple array type correctly
ok 4 - getTypeDescr() returns complex scalar type correctly
ok 5 - getTypeDescr() returns complex array type correctly
ok
t/03Writer01basic.t ...............
1..16
ok 1 - use Pod::WSDL::Writer;
ok 2 - Constructor: Read argument pretty correctly.
ok 3 - Constructor: Read argument withDocumentation correctly.
ok 4 - Constructor: Initialized indentation correctly.
ok 5 - Constructor: Initialized last tag correctly.
ok 6 - Constructor: Initialized "faultMessageWritten" correctly.
ok 7 - Constructor: Initialized XML::Writer correctly.
ok 8 - wrNewLine works.
ok 9 - Writing empty elements works.
ok 10 - Writing non empty elements works.
ok 11 - wrDoc works.
ok 12 - wrDoc writes no documentation when object not initialized with withDocumentation.
ok 13 - wrDoc works.
ok 14 - wrDoc writes no documentation when object not initialized with withDocumentation.
ok 15 - Registering written fault messages seems to work.
ok 16 - AUTOLOADER using XML::Writer correctly.
ok
t/04Attr01basic.t .................
1..14
ok 1 - use Pod::WSDL::Attr;
ok 2 - new dies, if it does not get a string
ok 3 - new dies, if it does not get a string beginning with _ATTR
ok 4 - new dies, if array/scalar type is not specified
ok 5 - Read name correctly from input
ok 6 - Read type correctly from input
ok 7 - Read scalar type correctly from input
ok 8 - Read descr correctly from input
ok 9 - Read _NEEDED correctly from input
ok 10 - Handles whitespace before _ATTR correctly.
ok 11 - Read array type correctly from input
ok 12 - Read descr correctly from input without needed
ok 13 - No description is handled correctly
ok 14 - Renaming attr is forbidden.
ok
t/04Type01basic.t .................
1..11
ok 1 - use Pod::WSDL::Type;
ok 2 - new Type dies, if it does not get a name
ok 3 - Read name argument correctly from input
ok 4 - Read array argument correctly from input
ok 5 - Read descr argument correctly from input
ok 6 - Read writer argument correctly from input
ok 7 - Setting array member works
ok 8 - Type does not allow getting of writer
ok 9 - Type does not allow setting of name
ok 10 - Type does not allow setting of descr
ok 11 - Type does not allow setting of writer
ok
t/05Doc01basic.t ..................
1..7
ok 1 - use Pod::WSDL::Doc;
ok 2 - new dies, if it does not get a string
ok 3 - new dies, if it does not get a string beginning with _DOC
ok 4 - Read descr correctly from input
ok 5 - Handles whitespace before _DOC correctly.
ok 6 - No description is handled correctly
ok 7 - Setting description works
ok
t/06Fault01basic.t ................
1..10
ok 1 - use Pod::WSDL::Fault;
ok 2 - new dies, if it does not get a string
ok 3 - new dies, if it does not get a string beginning with _FAULT
ok 4 - new dies, if array/scalar type is not specified
ok 5 - Read wsdl name correctly from input
ok 6 - Read type correctly from input
ok 7 - Read descr correctly from input
ok 8 - Handles whitespace before _FAULT correctly.
ok 9 - No description is handled correctly
ok 10 - Renaming fault is forbidden.
ok
t/07Return01basic.t ...............
1..11
ok 1 - use Pod::WSDL::Return;
ok 2 - new dies, if it does not get a string
ok 3 - new dies, if it does not get a string beginning with _RETURN
ok 4 - new dies, if array/scalar type is not specified
ok 5 - Read type correctly from input
ok 6 - Read scalar type correctly from input
ok 7 - Read descr correctly from input
ok 8 - Handles whitespace before _RETURN correctly.
ok 9 - Read array type correctly from input
ok 10 - No description is handled correctly
ok 11 - Renaming return type is forbidden.
ok
t/08Param01basic.t ................
1..15
ok 1 - use Pod::WSDL::Param;
ok 2 - new dies, if it does not get a string
ok 3 - new dies, if it does not get a string beginning with _IN, _OUT, or _INOUT
ok 4 - new dies, if array/scalar type is not specified
ok 5 - Read name correctly from input
ok 6 - Read type correctly from input
ok 7 - Read in type correctly from input
ok 8 - Read scalar type correctly from input
ok 9 - Read descr correctly from input
ok 10 - Handles whitespace before _IN correctly.
ok 11 - Read array type correctly from input
ok 12 - No description is handled correctly
ok 13 - Read in type correctly from input
ok 14 - Read inout type correctly from input
ok 15 - Renaming param is forbidden.
ok
t/09Attr01basic.t .................
1..13
ok 1 - use Pod::WSDL::Type;
ok 2 - new dies, if it does not get a name parameter
ok 3 - Red name argument correctly
ok 4 - Made wsdl name correctly
ok 5 - Red array argument correctly
ok 6 - Red descr argument correctly
ok 7 - Seem to parse pod correctly
ok 8 - ... yes
ok 9 - ... yes
ok 10 - ... indeed
ok 11 - Default for array works
ok 12 - Handling lack of description works
ok 13 - Renaming type is forbidden
ok
t/10Method01basic.t ...............
1..21
ok 1 - use Pod::WSDL::Method;
ok 2 - new dies, if it does not get a name
ok 3 - new dies, if it does not get a writer
ok 4 - Retrieving name works
ok 5 - Default for oneway set correctly
ok 6 - Retrieving return works
ok 7 - Retrieving doc works
ok 8 - Retrieving param works
ok 9 - Retrieving fault works
ok 10 - Pod::WSDL::Writer correctly initialized
ok 11 - Setting return works
ok 12 - Setting doc works
ok 13 - Adding param does not influence existing params
ok 14 - Adding fault does not influence existing faults
ok 15 - Setting param works
ok 16 - Setting fault works
ok 17 - Setting param oneway works
ok 18 - Unsetting param oneway works
ok 19 - Renaming method is forbidden.
ok 20 - Method requestName() works
ok 21 - Method responseName() works
ok
t/11WSDL01basic.t .................
1..33
ok 1 - use Pod::WSDL;
ok 2 - new dies, if it does not get a location
ok 3 - new dies, if it does not get a source
ok 4 - Received pretty argument correctly
ok 5 - Received withDocumentation argument correctly
ok 6 - Received location argument correctly
ok 7 - Received source argument correctly
ok 8 - Generated base name argument correctly
ok 9 - Setting location works
ok 10 - Generated xmlns:impl namespace correctly
ok 11 - Generated xmlns:soap namespace correctly
ok 12 - Generated xmlns:wsdl namespace correctly
ok 13 - Generated xmlns:soapenc namespace correctly
ok 14 - Generated xmlns:xsd namespace correctly
ok 15 - Generated xmlns:tns1 namespace correctly
ok 16 - Initialized outStr for writer correctly.
ok 17 - Found an XML::Writer for output
ok 18 - Initialized generateNS correctly
ok 19 - Initialized indentation correctly
ok 20 - Initialized lastTag correctly
ok 21 - Generated comment correctly
ok 22 - Found documentation in schema part (complexType).
ok 23 - Found documentation in schema part (element).
ok 24 - Found documentation in operation part.
ok 25 - Switched off documentation -> did not find documentation in schema part (complexType).
ok 26 - Switched off documentation -> did not find documentation in schema part (element).
ok 27 - Switched off documentation -> did not find documentation in operation part.
ok 28 - Found documentation in schema part (complexType).
ok 29 - Found documentation in schema part (element).
ok 30 - Found documentation in operation part.
ok 31 - Pretty works.
ok 32 - Switch pretty off works.
ok 33 - Switch pretty on works.
ok
t/11WSDL02types.t .................
1..54
ok 1 - use Pod::WSDL;
ok 2 - Recognized xsd type 'anyType' on method 'testXSDTypes' correctly
ok 3 - Recognized xsd type 'anySimpleType' on method 'testXSDTypes' correctly
ok 4 - Recognized xsd type 'string' on method 'testXSDTypes' correctly
ok 5 - Recognized xsd type 'normalizedString' on method 'testXSDTypes' correctly
ok 6 - Recognized xsd type 'token' on method 'testXSDTypes' correctly
ok 7 - Recognized xsd type 'anyURI' on method 'testXSDTypes' correctly
ok 8 - Recognized xsd type 'language' on method 'testXSDTypes' correctly
ok 9 - Recognized xsd type 'Name' on method 'testXSDTypes' correctly
ok 10 - Recognized xsd type 'QName' on method 'testXSDTypes' correctly
ok 11 - Recognized xsd type 'NCName' on method 'testXSDTypes' correctly
ok 12 - Recognized xsd type 'boolean' on method 'testXSDTypes' correctly
ok 13 - Recognized xsd type 'float' on method 'testXSDTypes' correctly
ok 14 - Recognized xsd type 'double' on method 'testXSDTypes' correctly
ok 15 - Recognized xsd type 'decimal' on method 'testXSDTypes' correctly
ok 16 - Recognized xsd type 'int' on method 'testXSDTypes' correctly
ok 17 - Recognized xsd type 'positiveInteger' on method 'testXSDTypes' correctly
ok 18 - Recognized xsd type 'nonPositiveInteger' on method 'testXSDTypes' correctly
ok 19 - Recognized xsd type 'negativeInteger' on method 'testXSDTypes' correctly
ok 20 - Recognized xsd type 'nonNegativeInteger' on method 'testXSDTypes' correctly
ok 21 - Recognized xsd type 'long' on method 'testXSDTypes' correctly
ok 22 - Recognized xsd type 'short' on method 'testXSDTypes' correctly
ok 23 - Recognized xsd type 'byte' on method 'testXSDTypes' correctly
ok 24 - Recognized xsd type 'unsignedInt' on method 'testXSDTypes' correctly
ok 25 - Recognized xsd type 'unsignedLong' on method 'testXSDTypes' correctly
ok 26 - Recognized xsd type 'unsignedShort' on method 'testXSDTypes' correctly
ok 27 - Recognized xsd type 'unsignedByte' on method 'testXSDTypes' correctly
ok 28 - Recognized xsd type 'duration' on method 'testXSDTypes' correctly
ok 29 - Recognized xsd type 'dateTime' on method 'testXSDTypes' correctly
ok 30 - Recognized xsd type 'time' on method 'testXSDTypes' correctly
ok 31 - Recognized xsd type 'date' on method 'testXSDTypes' correctly
ok 32 - Recognized xsd type 'gYearMonth' on method 'testXSDTypes' correctly
ok 33 - Recognized xsd type 'gYear' on method 'testXSDTypes' correctly
ok 34 - Recognized xsd type 'gMonthDay' on method 'testXSDTypes' correctly
ok 35 - Recognized xsd type 'gDay' on method 'testXSDTypes' correctly
ok 36 - Recognized xsd type 'gMonth' on method 'testXSDTypes' correctly
ok 37 - Recognized xsd type 'hexBinary' on method 'testXSDTypes' correctly
ok 38 - Recognized xsd type 'base64Binary' on method 'testXSDTypes' correctly
ok 39 - Recognized own complex type 'My::Foo' on method 'testComplexTypes' correctly
ok 40 - Found schema with targetNamespace "http://localhost/My/TypeTest" in xml output.
ok 41 - Found import of namespace "http://schemas.xmlsoap.org/soap/encoding/" in schema in xml output.
ok 42 - Found complex type MyFoo in xml output.
ok 43 - Found element with name "_bar" and type xsd:negativeInteger in complex type MyFoo in xml output.
ok 44 - Found documentation for element with name "_bar" in complex type MyFoo in xml output.
ok 45 - Found array type ArrayOfString in xml output.
ok 46 - ArrayOfString has complexContent child.
ok 47 - complexContent has restriction child with base="soapenc:Array".
ok 48 - restriction has attribute child with ref="soapenc:arrayType" and wsdl:arrayType="soapenc:string[].
ok 49 - Found array type ArrayOfMyFoo in xml output.
ok 50 - ArrayOfMyFoo has complexContent child.
ok 51 - complexContent has restriction child with base="soapenc:Array".
ok 52 - restriction has attribute child with ref="soapenc:arrayType" and wsdl:arrayType="tns1:MyFoo[].
ok 53 - Found nillable element with name "_boerk" in complex type MyFoo in xml output.
ok 54 - Pod::WSDL dies on encountering unknown type
ok
t/11WSDL03operations.t ............
1..23
ok 1 - use Pod::WSDL;
ok 2 - Found message element "testGeneralRequest" in xml output.
ok 3 - Found part element "in" for message "testGeneralRequest" in xml output.
ok 4 - Found message element "testGeneralResponse" in xml output.
ok 5 - Found part element "testGeneralReturn" for message "testGeneralResponse" in xml output.
ok 6 - Found portType element "MyOperationTestHandler" in xml output.
ok 7 - Found operation element "testGeneral" in portType in xml output.
ok 8 - Found documentation for operation element "testGeneral".
ok 9 - Found input message for operation element "testGeneral".
ok 10 - Found output message for operation element "testGeneral".
ok 11 - Found part element "in" in xml output.
ok 12 - Found part element "out" in xml output.
ok 13 - Found part element "inout" in xml output.
ok 14 - Found message element "MyFoo" in xml output.
ok 15 - Found part element "fault" for message "MyFoo" in xml output.
ok 16 - Found fault message for operation element "testGeneral".
ok 17 - Found correct part element "in" for message "testArrayRequest" in xml output.
ok 18 - Found correct part element "testArrayReturn" for message "testArrayResponse" in xml output.
ok 19 - Found message element with name "testOnewayRequest" for message "testOneway" in xml output.
ok 20 - Found message element with name "empty" for message "testEmpty" in xml output.
ok 21 - Found input message for operation element "testOneway".
ok 22 - Did not find output message (which is correct) for operation element "testOneway".
ok 23 - Non pod messages not found xml output.
<?xml version="1.0" encoding="UTF-8"?>
<!-- WSDL for http://localhost/My/OperationTest created by Pod::WSDL version: 0.063 on Sun Nov 17 04:16:15 2024 -->
<wsdl:definitions targetNamespace="http://localhost/My/OperationTest" xmlns:impl="http://localhost/My/OperationTest" xmlns:tns1="http://localhost/My/OperationTest" xmlns:wsdlsoap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/" xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/">
<wsdl:types>
<schema targetNamespace="http://localhost/My/OperationTest" xmlns="http://www.w3.org/2001/XMLSchema">
<import namespace="http://schemas.xmlsoap.org/soap/encoding/" />
<complexType name="ArrayOfString">
<complexContent>
<restriction base="soapenc:Array">
<attribute ref="soapenc:arrayType" wsdl:arrayType="soapenc:string[]" />
</restriction>
</complexContent>
</complexType>
<complexType name="MyFoo">
<annotation>
<documentation>NAME
My::Foo - blah
SYNOPSIS
use My::Foo;
DESCRIPTION
blah blah</documentation>
</annotation>
<sequence>
<element name="_bar" type="xsd:negativeInteger">
<annotation>
<documentation>a bar</documentation>
</annotation>
</element>
<element type="xsd:boolean" nillable="true" name="_boerk">
<annotation>
<documentation>a nillable _boerk</documentation>
</annotation>
</element>
</sequence>
</complexType>
</schema>
</wsdl:types>
<wsdl:message name="testGeneralRequest">
<wsdl:part name="in" type="xsd:string" />
</wsdl:message>
<wsdl:message name="testGeneralResponse">
<wsdl:part name="testGeneralReturn" type="xsd:string" />
</wsdl:message>
<wsdl:message name="MyFoo">
<wsdl:part type="tns1:MyFoo" name="fault" />
</wsdl:message>
<wsdl:message name="testInOutRequest">
<wsdl:part name="in" type="xsd:string" />
<wsdl:part name="out" type="xsd:string" />
<wsdl:part type="xsd:string" name="inout" />
</wsdl:message>
<wsdl:message name="empty" />
<wsdl:message name="testArrayRequest">
<wsdl:part type="tns1:ArrayOfString" name="in" />
</wsdl:message>
<wsdl:message name="testArrayResponse">
<wsdl:part type="tns1:ArrayOfString" name="testArrayReturn" />
</wsdl:message>
<wsdl:message name="testEmptyRequest">
<wsdl:part type="tns1:ArrayOfString" name="in" />
</wsdl:message>
<wsdl:message name="testOnewayRequest">
<wsdl:part type="tns1:ArrayOfString" name="in" />
</wsdl:message>
<wsdl:message name="testNoReturnNoParamRequest">
</wsdl:message>
<wsdl:portType name="MyOperationTestHandler">
<wsdl:operation name="testGeneral" parameterOrder="in">
<wsdl:documentation>bla bla</wsdl:documentation>
<wsdl:input message="impl:testGeneralRequest" name="testGeneralRequest" />
<wsdl:output message="impl:testGeneralResponse" name="testGeneralResponse" />
<wsdl:fault message="impl:MyFoo" name="MyFoo" />
</wsdl:operation>
<wsdl:operation name="testInOut" parameterOrder="in out inout">
<wsdl:input message="impl:testInOutRequest" name="testInOutRequest" />
<wsdl:output message="impl:empty" />
</wsdl:operation>
<wsdl:operation name="testArray" parameterOrder="in">
<wsdl:input message="impl:testArrayRequest" name="testArrayRequest" />
<wsdl:output message="impl:testArrayResponse" name="testArrayResponse" />
</wsdl:operation>
<wsdl:operation name="testEmpty" parameterOrder="in">
<wsdl:input message="impl:testEmptyRequest" name="testEmptyRequest" />
<wsdl:output message="impl:empty" />
</wsdl:operation>
<wsdl:operation name="testOneway" parameterOrder="in">
<wsdl:input message="impl:testOnewayRequest" name="testOnewayRequest" />
</wsdl:operation>
<wsdl:operation name="testNoReturnNoParam">
<wsdl:input message="impl:testNoReturnNoParamRequest" name="testNoReturnNoParamRequest" />
<wsdl:output message="impl:empty" />
</wsdl:operation>
</wsdl:portType>
<wsdl:binding name="MyOperationTestSoapBinding" type="impl:MyOperationTestHandler">
<wsdlsoap:binding style="rpc" transport="http://schemas.xmlsoap.org/soap/http" />
<wsdl:operation name="testGeneral">
<wsdlsoap:operation soapAction="" />
<wsdl:input name="testGeneralRequest">
<wsdlsoap:body encodingStyle="http://schemas.xmlsoap.org/soap/encoding/" namespace="http://localhost/My/OperationTest" use="encoded" />
</wsdl:input>
<wsdl:output name="testGeneralResponse">
<wsdlsoap:body encodingStyle="http://schemas.xmlsoap.org/soap/encoding/" namespace="http://localhost/My/OperationTest" use="encoded" />
</wsdl:output>
<wsdl:fault name="MyFoo">
<wsdlsoap:fault name="MyFoo" encodingStyle="http://schemas.xmlsoap.org/soap/encoding/" namespace="http://localhost/My/OperationTest" use="encoded" />
</wsdl:fault>
</wsdl:operation>
<wsdl:operation name="testInOut">
<wsdlsoap:operation soapAction="" />
<wsdl:input name="testInOutRequest">
<wsdlsoap:body encodingStyle="http://schemas.xmlsoap.org/soap/encoding/" namespace="http://localhost/My/OperationTest" use="encoded" />
</wsdl:input>
<wsdl:output name="empty">
<wsdlsoap:body encodingStyle="http://schemas.xmlsoap.org/soap/encoding/" namespace="http://localhost/My/OperationTest" use="encoded" />
</wsdl:output>
</wsdl:operation>
<wsdl:operation name="testArray">
<wsdlsoap:operation soapAction="" />
<wsdl:input name="testArrayRequest">
<wsdlsoap:body encodingStyle="http://schemas.xmlsoap.org/soap/encoding/" namespace="http://localhost/My/OperationTest" use="encoded" />
</wsdl:input>
<wsdl:output name="testArrayResponse">
<wsdlsoap:body encodingStyle="http://schemas.xmlsoap.org/soap/encoding/" namespace="http://localhost/My/OperationTest" use="encoded" />
</wsdl:output>
</wsdl:operation>
<wsdl:operation name="testEmpty">
<wsdlsoap:operation soapAction="" />
<wsdl:input name="testEmptyRequest">
<wsdlsoap:body encodingStyle="http://schemas.xmlsoap.org/soap/encoding/" namespace="http://localhost/My/OperationTest" use="encoded" />
</wsdl:input>
<wsdl:output name="empty">
<wsdlsoap:body encodingStyle="http://schemas.xmlsoap.org/soap/encoding/" namespace="http://localhost/My/OperationTest" use="encoded" />
</wsdl:output>
</wsdl:operation>
<wsdl:operation name="testOneway">
<wsdlsoap:operation soapAction="" />
<wsdl:input name="testOnewayRequest">
<wsdlsoap:body encodingStyle="http://schemas.xmlsoap.org/soap/encoding/" namespace="http://localhost/My/OperationTest" use="encoded" />
</wsdl:input>
</wsdl:operation>
<wsdl:operation name="testNoReturnNoParam">
<wsdlsoap:operation soapAction="" />
<wsdl:input name="testNoReturnNoParamRequest">
<wsdlsoap:body encodingStyle="http://schemas.xmlsoap.org/soap/encoding/" namespace="http://localhost/My/OperationTest" use="encoded" />
</wsdl:input>
<wsdl:output name="empty">
<wsdlsoap:body encodingStyle="http://schemas.xmlsoap.org/soap/encoding/" namespace="http://localhost/My/OperationTest" use="encoded" />
</wsdl:output>
</wsdl:operation>
</wsdl:binding>
<wsdl:service name="MyOperationTestHandlerService">
<wsdl:port binding="impl:MyOperationTestSoapBinding" name="MyOperationTest">
<wsdlsoap:address location="http://localhost/My/OperationTest" />
</wsdl:port>
</wsdl:service>
</wsdl:definitions>
ok
t/11WSDL04binding.t ...............
1..15
ok 1 - use Pod::WSDL;
ok 2 - Found wsdl:binding element in xml output.
ok 3 - Found wsdlsoap:binding element in wsdl:binding.
ok 4 - Found operation "testGeneral" element in wsdl:binding.
ok 5 - Found wsdlsoap:operation in operation "testGeneral" element.
ok 6 - Found wsdl:input in operation "testGeneral" element.
ok 7 - Found wsdlsoap:body in wsdl:input element.
ok 8 - Found wsdl:output in operation "testGeneral" element.
ok 9 - Found wsdlsoap:body in wsdl:output element.
ok 10 - Found wsdl:fault in operation "testGeneral" element.
ok 11 - Found wsdlsoap:fault in wsdl:fault element.
ok 12 - Found wsdl:input in operation "testOneway" element.
ok 13 - Found wsdlsoap:body in wsdl:input element.
ok 14 - Did not find wsdl:output in operation "testOneway" element (which is correct).
ok 15 - Non pod operation not found in binding.
ok
t/11WSDL05service.t ...............
1..4
ok 1 - use Pod::WSDL;
ok 2 - Found wsdl:service element in xml output.
ok 3 - Found wsdl:port in wsdl:service element.
ok 4 - Found wsdlsoap:address in wsdl:port element.
ok
t/11WSDL06parsing.t ...............
1..1
ok 1 - use Pod::WSDL;
ok
All tests successful.
Files=18, Tests=265, 2 wallclock secs ( 0.09 usr 0.04 sys + 1.82 cusr 0.28 csys = 2.23 CPU)
Result: PASS
make[1]: Leaving directory '/<<PKGBUILDDIR>>'
create-stamp debian/debhelper-build-stamp
dh_prep
dh_auto_install --destdir=debian/libpod-wsdl-perl/
make -j8 install DESTDIR=/<<PKGBUILDDIR>>/debian/libpod-wsdl-perl AM_UPDATE_INFO_DIR=no PREFIX=/usr
make[1]: Entering directory '/<<PKGBUILDDIR>>'
Manifying 11 pod documents
Installing /<<PKGBUILDDIR>>/debian/libpod-wsdl-perl/usr/share/perl5/Pod/WSDL.pm
Installing /<<PKGBUILDDIR>>/debian/libpod-wsdl-perl/usr/share/perl5/Pod/WSDL/Param.pm
Installing /<<PKGBUILDDIR>>/debian/libpod-wsdl-perl/usr/share/perl5/Pod/WSDL/Writer.pm
Installing /<<PKGBUILDDIR>>/debian/libpod-wsdl-perl/usr/share/perl5/Pod/WSDL/Doc.pm
Installing /<<PKGBUILDDIR>>/debian/libpod-wsdl-perl/usr/share/perl5/Pod/WSDL/Type.pm
Installing /<<PKGBUILDDIR>>/debian/libpod-wsdl-perl/usr/share/perl5/Pod/WSDL/Fault.pm
Installing /<<PKGBUILDDIR>>/debian/libpod-wsdl-perl/usr/share/perl5/Pod/WSDL/Return.pm
Installing /<<PKGBUILDDIR>>/debian/libpod-wsdl-perl/usr/share/perl5/Pod/WSDL/Utils.pm
Installing /<<PKGBUILDDIR>>/debian/libpod-wsdl-perl/usr/share/perl5/Pod/WSDL/Method.pm
Installing /<<PKGBUILDDIR>>/debian/libpod-wsdl-perl/usr/share/perl5/Pod/WSDL/AUTOLOAD.pm
Installing /<<PKGBUILDDIR>>/debian/libpod-wsdl-perl/usr/share/perl5/Pod/WSDL/Attr.pm
Installing /<<PKGBUILDDIR>>/debian/libpod-wsdl-perl/usr/share/man/man3/Pod::WSDL::Writer.3pm
Installing /<<PKGBUILDDIR>>/debian/libpod-wsdl-perl/usr/share/man/man3/Pod::WSDL.3pm
Installing /<<PKGBUILDDIR>>/debian/libpod-wsdl-perl/usr/share/man/man3/Pod::WSDL::Param.3pm
Installing /<<PKGBUILDDIR>>/debian/libpod-wsdl-perl/usr/share/man/man3/Pod::WSDL::Utils.3pm
Installing /<<PKGBUILDDIR>>/debian/libpod-wsdl-perl/usr/share/man/man3/Pod::WSDL::Fault.3pm
Installing /<<PKGBUILDDIR>>/debian/libpod-wsdl-perl/usr/share/man/man3/Pod::WSDL::Return.3pm
Installing /<<PKGBUILDDIR>>/debian/libpod-wsdl-perl/usr/share/man/man3/Pod::WSDL::Attr.3pm
Installing /<<PKGBUILDDIR>>/debian/libpod-wsdl-perl/usr/share/man/man3/Pod::WSDL::AUTOLOAD.3pm
Installing /<<PKGBUILDDIR>>/debian/libpod-wsdl-perl/usr/share/man/man3/Pod::WSDL::Doc.3pm
Installing /<<PKGBUILDDIR>>/debian/libpod-wsdl-perl/usr/share/man/man3/Pod::WSDL::Type.3pm
Installing /<<PKGBUILDDIR>>/debian/libpod-wsdl-perl/usr/share/man/man3/Pod::WSDL::Method.3pm
make[1]: Leaving directory '/<<PKGBUILDDIR>>'
dh_installdocs
dh_installchangelogs
dh_installman
dh_perl
dh_link
dh_strip_nondeterminism
dh_compress
dh_fixperms
dh_missing
dh_installdeb
dh_gencontrol
dh_md5sums
dh_builddeb
dpkg-deb: building package 'libpod-wsdl-perl' in '../libpod-wsdl-perl_0.063-2_all.deb'.
dpkg-genbuildinfo --build=binary -O../libpod-wsdl-perl_0.063-2_arm64.buildinfo
dpkg-genchanges --build=binary -O../libpod-wsdl-perl_0.063-2_arm64.changes
dpkg-genchanges: info: binary-only upload (no source code included)
dpkg-source --after-build .
dpkg-buildpackage: info: binary-only upload (no source included)
--------------------------------------------------------------------------------
Build finished at 2024-11-17T04:16:18Z
Finished
--------
I: Built successfully
+------------------------------------------------------------------------------+
| Changes |
+------------------------------------------------------------------------------+
libpod-wsdl-perl_0.063-2_arm64.changes:
---------------------------------------
Format: 1.8
Date: Fri, 17 Jun 2022 00:23:40 +0100
Source: libpod-wsdl-perl
Binary: libpod-wsdl-perl
Architecture: all
Version: 0.063-2
Distribution: sid
Urgency: medium
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Changed-By: Jelmer Vernooij <jelmer@debian.org>
Description:
libpod-wsdl-perl - creator of WSDL documents from (extended) POD
Changes:
libpod-wsdl-perl (0.063-2) unstable; urgency=medium
.
[ Salvatore Bonaccorso ]
* debian/control: Use HTTPS transport protocol for Vcs-Git URI
.
[ gregor herrmann ]
* debian/copyright: change Copyright-Format 1.0 URL to HTTPS.
* debian/upstream/metadata: change GitHub/CPAN URL(s) to HTTPS.
* Remove TANIGUCHI Takaki from Uploaders. Thanks for your work!
.
[ Salvatore Bonaccorso ]
* Update Vcs-* headers for switch to salsa.debian.org
.
[ gregor herrmann ]
* debian/watch: use uscan version 4.
.
[ Debian Janitor ]
* Bump debhelper from deprecated 8 to 12.
* Set debhelper-compat version in Build-Depends.
* Set upstream metadata fields: Bug-Database, Bug-Submit, Repository,
Repository-Browse.
* Remove obsolete fields Contact, Name from debian/upstream/metadata
(already present in machine-readable debian/copyright).
Checksums-Sha1:
1c7e445a2dbc31db3ea58053079f02e634a97591 40352 libpod-wsdl-perl_0.063-2_all.deb
a1269316d2d0203381b0e46f12a6ffe21276cf84 5640 libpod-wsdl-perl_0.063-2_arm64.buildinfo
Checksums-Sha256:
cc4ac9b3003f78bb7c79066b8dc7457154c0a337b42bb140630f64bed21355bf 40352 libpod-wsdl-perl_0.063-2_all.deb
d9c25aae2ea816c3851c360654bc15dae31923123ce1a40625b55ecdab3889e4 5640 libpod-wsdl-perl_0.063-2_arm64.buildinfo
Files:
65f60529c403f65372c28bb5957f2abe 40352 perl optional libpod-wsdl-perl_0.063-2_all.deb
7ad0ca0ae1577efa564b256dcd30d9b8 5640 perl optional libpod-wsdl-perl_0.063-2_arm64.buildinfo
+------------------------------------------------------------------------------+
| Buildinfo |
+------------------------------------------------------------------------------+
Format: 1.0
Source: libpod-wsdl-perl
Binary: libpod-wsdl-perl
Architecture: all
Version: 0.063-2
Checksums-Md5:
65f60529c403f65372c28bb5957f2abe 40352 libpod-wsdl-perl_0.063-2_all.deb
Checksums-Sha1:
1c7e445a2dbc31db3ea58053079f02e634a97591 40352 libpod-wsdl-perl_0.063-2_all.deb
Checksums-Sha256:
cc4ac9b3003f78bb7c79066b8dc7457154c0a337b42bb140630f64bed21355bf 40352 libpod-wsdl-perl_0.063-2_all.deb
Build-Origin: Debian
Build-Architecture: arm64
Build-Date: Sun, 17 Nov 2024 04:16:17 +0000
Build-Path: /<<PKGBUILDDIR>>
Build-Tainted-By:
merged-usr-via-aliased-dirs
Installed-Build-Depends:
autoconf (= 2.72-3),
automake (= 1:1.16.5-1.3),
autopoint (= 0.22.5-2),
autotools-dev (= 20220109.1),
base-files (= 13.5),
base-passwd (= 3.6.5),
bash (= 5.2.32-1+b2),
binutils (= 2.43.1-5),
binutils-aarch64-linux-gnu (= 2.43.1-5),
binutils-common (= 2.43.1-5),
bsdextrautils (= 2.40.2-11),
bsdutils (= 1:2.40.2-11),
build-essential (= 12.12),
bzip2 (= 1.0.8-6),
ca-certificates (= 20240203),
coreutils (= 9.5-1+b1),
cpp (= 4:14.2.0-1),
cpp-14 (= 14.2.0-8),
cpp-14-aarch64-linux-gnu (= 14.2.0-8),
cpp-aarch64-linux-gnu (= 4:14.2.0-1),
dash (= 0.5.12-9+b1),
debconf (= 1.5.87),
debhelper (= 13.20),
debianutils (= 5.21),
dh-autoreconf (= 20),
dh-strip-nondeterminism (= 1.14.0-1),
diffutils (= 1:3.10-1+b1),
dpkg (= 1.22.12~1.gbp82cafd),
dpkg-dev (= 1.22.12~1.gbp82cafd),
dwz (= 0.15-1+b1),
file (= 1:5.45-3+b1),
findutils (= 4.10.0-3),
g++ (= 4:14.2.0-1),
g++-14 (= 14.2.0-8),
g++-14-aarch64-linux-gnu (= 14.2.0-8),
g++-aarch64-linux-gnu (= 4:14.2.0-1),
gcc (= 4:14.2.0-1),
gcc-14 (= 14.2.0-8),
gcc-14-aarch64-linux-gnu (= 14.2.0-8),
gcc-14-base (= 14.2.0-8),
gcc-aarch64-linux-gnu (= 4:14.2.0-1),
gettext (= 0.22.5-2),
gettext-base (= 0.22.5-2),
grep (= 3.11-4+b1),
groff-base (= 1.23.0-5),
gzip (= 1.12-1.1+b1),
hostname (= 3.25),
init-system-helpers (= 1.67),
intltool-debian (= 0.35.0+20060710.6),
libacl1 (= 2.3.2-2+b1),
libarchive-zip-perl (= 1.68-1),
libasan8 (= 14.2.0-8),
libatomic1 (= 14.2.0-8),
libattr1 (= 1:2.5.2-2),
libaudit-common (= 1:4.0.2-2),
libaudit1 (= 1:4.0.2-2),
libbinutils (= 2.43.1-5),
libblkid1 (= 2.40.2-11),
libbz2-1.0 (= 1.0.8-6),
libc-bin (= 2.40-3),
libc-dev-bin (= 2.40-3),
libc6 (= 2.40-3),
libc6-dev (= 2.40-3),
libcap-ng0 (= 0.8.5-3+b1),
libcap2 (= 1:2.66-5+b1),
libcc1-0 (= 14.2.0-8),
libclone-perl (= 0.47-1+b1),
libcrypt-dev (= 1:4.4.36-5),
libcrypt1 (= 1:4.4.36-5),
libctf-nobfd0 (= 2.43.1-5),
libctf0 (= 2.43.1-5),
libdb5.3t64 (= 5.3.28+dfsg2-9),
libdebconfclient0 (= 0.273),
libdebhelper-perl (= 13.20),
libdpkg-perl (= 1.22.12~1.gbp82cafd),
libelf1t64 (= 0.192-4),
libencode-locale-perl (= 1.05-3),
libexpat1 (= 2.6.4-1),
libfile-listing-perl (= 6.16-1),
libfile-stripnondeterminism-perl (= 1.14.0-1),
libgcc-14-dev (= 14.2.0-8),
libgcc-s1 (= 14.2.0-8),
libgdbm-compat4t64 (= 1.24-2),
libgdbm6t64 (= 1.24-2),
libgmp10 (= 2:6.3.0+dfsg-2+b2),
libgomp1 (= 14.2.0-8),
libgprofng0 (= 2.43.1-5),
libhtml-parser-perl (= 3.83-1+b1),
libhtml-tagset-perl (= 3.24-1),
libhtml-tree-perl (= 5.07-3),
libhttp-cookies-perl (= 6.11-1),
libhttp-date-perl (= 6.06-1),
libhttp-message-perl (= 7.00-2),
libhttp-negotiate-perl (= 6.01-2),
libhwasan0 (= 14.2.0-8),
libicu72 (= 72.1-5+b1),
libio-html-perl (= 1.004-3),
libio-socket-ssl-perl (= 2.089-1),
libio-stringy-perl (= 2.113-2),
libisl23 (= 0.27-1),
libitm1 (= 14.2.0-8),
libjansson4 (= 2.14-2+b3),
liblsan0 (= 14.2.0-8),
liblwp-mediatypes-perl (= 6.04-2),
liblwp-protocol-https-perl (= 6.14-1),
liblzma5 (= 5.6.3-1+b1),
libmagic-mgc (= 1:5.45-3+b1),
libmagic1t64 (= 1:5.45-3+b1),
libmd0 (= 1.1.0-2+b1),
libmount1 (= 2.40.2-11),
libmpc3 (= 1.3.1-1+b3),
libmpfr6 (= 4.2.1-1+b2),
libnet-http-perl (= 6.23-1),
libnet-ssleay-perl (= 1.94-2),
libpam-modules (= 1.5.3-7+b1),
libpam-modules-bin (= 1.5.3-7+b1),
libpam-runtime (= 1.5.3-7),
libpam0g (= 1.5.3-7+b1),
libpcre2-8-0 (= 10.44-4),
libperl5.40 (= 5.40.0-7),
libpipeline1 (= 1.5.8-1),
libseccomp2 (= 2.5.5-1+b3),
libselinux1 (= 3.7-3+b1),
libsframe1 (= 2.43.1-5),
libsmartcols1 (= 2.40.2-11),
libssl3t64 (= 3.3.2-2),
libstdc++-14-dev (= 14.2.0-8),
libstdc++6 (= 14.2.0-8),
libsystemd0 (= 257~rc2-3),
libtest-xml-perl (= 0.08-4),
libtimedate-perl (= 2.3300-2),
libtinfo6 (= 6.5-2+b1),
libtool (= 2.4.7-8),
libtry-tiny-perl (= 0.32-1),
libtsan2 (= 14.2.0-8),
libubsan1 (= 14.2.0-8),
libuchardet0 (= 0.0.8-1+b2),
libudev1 (= 257~rc2-3),
libunistring5 (= 1.2-1+b1),
liburi-perl (= 5.30-1),
libuuid1 (= 2.40.2-11),
libwww-perl (= 6.77-1),
libwww-robotrules-perl (= 6.02-1),
libxml-parser-perl (= 2.47-1+b3),
libxml-semanticdiff-perl (= 1.0007-2),
libxml-writer-perl (= 0.900-2),
libxml-xpath-perl (= 1.48-1),
libxml2 (= 2.12.7+dfsg+really2.9.14-0.2+b1),
libzstd1 (= 1.5.6+dfsg-1+b1),
linux-libc-dev (= 6.11.7-1),
m4 (= 1.4.19-4),
make (= 4.3-4.1+b1),
man-db (= 2.13.0-1),
mawk (= 1.3.4.20240905-1),
ncurses-base (= 6.5-2),
ncurses-bin (= 6.5-2+b1),
netbase (= 6.4),
openssl (= 3.3.2-2),
openssl-provider-legacy (= 3.3.2-2),
patch (= 2.7.6-7+b1),
perl (= 5.40.0-7),
perl-base (= 5.40.0-7),
perl-modules-5.40 (= 5.40.0-7),
perl-openssl-defaults (= 7+b2),
po-debconf (= 1.0.21+nmu1),
rpcsvc-proto (= 1.4.3-1+b1),
sed (= 4.9-2+b1),
sensible-utils (= 0.0.24),
sysvinit-utils (= 3.11-1),
tar (= 1.35+dfsg-3+b1),
util-linux (= 2.40.2-11),
xz-utils (= 5.6.3-1+b1),
zlib1g (= 1:1.3.dfsg+really1.3.1-1+b1)
Environment:
DEB_BUILD_OPTIONS="parallel=8"
LANG="en_US.UTF-8"
LC_ALL="C.UTF-8"
SOURCE_DATE_EPOCH="1655421820"
+------------------------------------------------------------------------------+
| Package contents |
+------------------------------------------------------------------------------+
libpod-wsdl-perl_0.063-2_all.deb
--------------------------------
new Debian package, version 2.0.
size 40352 bytes: control archive=1228 bytes.
471 bytes, 12 lines control
1824 bytes, 25 lines md5sums
Package: libpod-wsdl-perl
Version: 0.063-2
Architecture: all
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Installed-Size: 111
Depends: perl:any, libio-stringy-perl, libxml-writer-perl, libxml-xpath-perl
Section: perl
Priority: optional
Homepage: https://metacpan.org/release/Pod-WSDL
Description: creator of WSDL documents from (extended) POD
Pod::WSDL is Perl module to create WSDL documents from (extended) module
documentation (POD).
drwxr-xr-x root/root 0 2022-06-16 23:23 ./
drwxr-xr-x root/root 0 2022-06-16 23:23 ./usr/
drwxr-xr-x root/root 0 2022-06-16 23:23 ./usr/share/
drwxr-xr-x root/root 0 2022-06-16 23:23 ./usr/share/doc/
drwxr-xr-x root/root 0 2022-06-16 23:23 ./usr/share/doc/libpod-wsdl-perl/
-rw-r--r-- root/root 997 2022-06-16 23:23 ./usr/share/doc/libpod-wsdl-perl/changelog.Debian.gz
-rw-r--r-- root/root 1269 2014-10-21 23:16 ./usr/share/doc/libpod-wsdl-perl/changelog.gz
-rw-r--r-- root/root 1063 2022-06-16 23:23 ./usr/share/doc/libpod-wsdl-perl/copyright
drwxr-xr-x root/root 0 2022-06-16 23:23 ./usr/share/man/
drwxr-xr-x root/root 0 2022-06-16 23:23 ./usr/share/man/man3/
-rw-r--r-- root/root 5638 2022-06-16 23:23 ./usr/share/man/man3/Pod::WSDL.3pm.gz
-rw-r--r-- root/root 1801 2022-06-16 23:23 ./usr/share/man/man3/Pod::WSDL::AUTOLOAD.3pm.gz
-rw-r--r-- root/root 1487 2022-06-16 23:23 ./usr/share/man/man3/Pod::WSDL::Attr.3pm.gz
-rw-r--r-- root/root 1475 2022-06-16 23:23 ./usr/share/man/man3/Pod::WSDL::Doc.3pm.gz
-rw-r--r-- root/root 1489 2022-06-16 23:23 ./usr/share/man/man3/Pod::WSDL::Fault.3pm.gz
-rw-r--r-- root/root 1822 2022-06-16 23:23 ./usr/share/man/man3/Pod::WSDL::Method.3pm.gz
-rw-r--r-- root/root 1488 2022-06-16 23:23 ./usr/share/man/man3/Pod::WSDL::Param.3pm.gz
-rw-r--r-- root/root 1484 2022-06-16 23:23 ./usr/share/man/man3/Pod::WSDL::Return.3pm.gz
-rw-r--r-- root/root 1646 2022-06-16 23:23 ./usr/share/man/man3/Pod::WSDL::Type.3pm.gz
-rw-r--r-- root/root 1367 2022-06-16 23:23 ./usr/share/man/man3/Pod::WSDL::Utils.3pm.gz
-rw-r--r-- root/root 1887 2022-06-16 23:23 ./usr/share/man/man3/Pod::WSDL::Writer.3pm.gz
drwxr-xr-x root/root 0 2022-06-16 23:23 ./usr/share/perl5/
drwxr-xr-x root/root 0 2022-06-16 23:23 ./usr/share/perl5/Pod/
-rw-r--r-- root/root 26364 2014-10-21 23:16 ./usr/share/perl5/Pod/WSDL.pm
drwxr-xr-x root/root 0 2022-06-16 23:23 ./usr/share/perl5/Pod/WSDL/
-rw-r--r-- root/root 3126 2014-10-21 23:16 ./usr/share/perl5/Pod/WSDL/AUTOLOAD.pm
-rw-r--r-- root/root 2165 2014-10-21 23:16 ./usr/share/perl5/Pod/WSDL/Attr.pm
-rw-r--r-- root/root 1567 2014-10-21 23:16 ./usr/share/perl5/Pod/WSDL/Doc.pm
-rw-r--r-- root/root 1937 2014-10-21 23:16 ./usr/share/perl5/Pod/WSDL/Fault.pm
-rw-r--r-- root/root 11492 2014-10-21 23:16 ./usr/share/perl5/Pod/WSDL/Method.pm
-rw-r--r-- root/root 2196 2014-10-21 23:16 ./usr/share/perl5/Pod/WSDL/Param.pm
-rw-r--r-- root/root 1908 2014-10-21 23:16 ./usr/share/perl5/Pod/WSDL/Return.pm
-rw-r--r-- root/root 4939 2014-10-21 23:16 ./usr/share/perl5/Pod/WSDL/Type.pm
-rw-r--r-- root/root 3614 2014-10-21 23:16 ./usr/share/perl5/Pod/WSDL/Utils.pm
-rw-r--r-- root/root 5769 2014-10-21 23:16 ./usr/share/perl5/Pod/WSDL/Writer.pm
lintian
-------
Setup apt archive
-----------------
Merged Build-Depends: lintian
Filtered Build-Depends: lintian
dpkg-deb: warning: root directory has unusual owner or group 998:999.
Hint: either pass --root-owner-group, see dpkg-build-api(7) or add an explicit 'Rules-Requires-Root: no' in debian/control.
dpkg-deb: warning: ignoring 1 warning about the control file(s)
dpkg-deb: building package 'sbuild-build-depends-lintian-dummy' in '/<<RESOLVERDIR>>/apt_archive/sbuild-build-depends-lintian-dummy.deb'.
Ign:1 copy:/<<RESOLVERDIR>>/apt_archive ./ InRelease
Get:2 copy:/<<RESOLVERDIR>>/apt_archive ./ Release [615 B]
Ign:3 copy:/<<RESOLVERDIR>>/apt_archive ./ Release.gpg
Get:4 copy:/<<RESOLVERDIR>>/apt_archive ./ Sources [1302 B]
Get:5 copy:/<<RESOLVERDIR>>/apt_archive ./ Packages [1344 B]
Fetched 3261 B in 0s (285 kB/s)
Reading package lists...
Get:1 file:/<<BUILDDIR>>/resolver-tKZ1C4/apt_archive ./ InRelease
Ign:1 file:/<<BUILDDIR>>/resolver-tKZ1C4/apt_archive ./ InRelease
Get:2 file:/<<BUILDDIR>>/resolver-tKZ1C4/apt_archive ./ Release [606 B]
Get:2 file:/<<BUILDDIR>>/resolver-tKZ1C4/apt_archive ./ Release [606 B]
Get:3 file:/<<BUILDDIR>>/resolver-tKZ1C4/apt_archive ./ Release.gpg
Ign:3 file:/<<BUILDDIR>>/resolver-tKZ1C4/apt_archive ./ Release.gpg
Reading package lists...
Reading package lists...
Install lintian build dependencies (apt-based resolver)
-------------------------------------------------------
Installing build dependencies
Reading package lists...
Building dependency tree...
Reading state information...
The following NEW packages will be installed:
sbuild-build-depends-lintian-dummy
0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded.
Need to get 856 B of archives.
After this operation, 0 B of additional disk space will be used.
Get:1 copy:/<<RESOLVERDIR>>/apt_archive ./ sbuild-build-depends-lintian-dummy 0.invalid.0 [856 B]
debconf: delaying package configuration, since apt-utils is not installed
Fetched 856 B in 0s (0 B/s)
Selecting previously unselected package sbuild-build-depends-lintian-dummy.
(Reading database ... 22737 files and directories currently installed.)
Preparing to unpack .../sbuild-build-depends-lintian-dummy_0.invalid.0_arm64.deb ...
Unpacking sbuild-build-depends-lintian-dummy (0.invalid.0) ...
Setting up sbuild-build-depends-lintian-dummy (0.invalid.0) ...
Running lintian...
E: libpod-wsdl-perl source: no-human-maintainers
W: libpod-wsdl-perl changes: distribution-and-changes-mismatch sid unstable
W: libpod-wsdl-perl source: no-nmu-in-changelog [debian/changelog:1]
W: libpod-wsdl-perl source: source-nmu-has-incorrect-version-number 0.063-2 [debian/changelog:1]
E: Lintian run failed (runtime error)
+------------------------------------------------------------------------------+
| Post Build |
+------------------------------------------------------------------------------+
+------------------------------------------------------------------------------+
| Cleanup |
+------------------------------------------------------------------------------+
Purging /<<BUILDDIR>>
Not cleaning session: cloned chroot in use
+------------------------------------------------------------------------------+
| Summary |
+------------------------------------------------------------------------------+
Build Architecture: arm64
Build Type: binary
Build-Space: 872
Build-Time: 8
Distribution: sid
Host Architecture: arm64
Install-Time: 17
Job: /tmp/debusine-fetch-exec-upload-3z63rbfv/libpod-wsdl-perl_0.063-2.dsc
Lintian: error
Machine Architecture: arm64
Package: libpod-wsdl-perl
Package-Time: 61
Source-Version: 0.063-2
Space: 872
Status: successful
Version: 0.063-2
--------------------------------------------------------------------------------
Finished at 2024-11-17T04:16:18Z
Build needed 00:01:01, 872k disk space