sbuild (Debian sbuild) 0.86.3~bpo12+1 (03 November 2024) on debusine-worker-arm64-demeter-01.freexian.com
+==============================================================================+
| libthread-tie-perl 0.15-2 (arm64) Sun, 17 Nov 2024 07:06:45 +0000 |
+==============================================================================+
Package: libthread-tie-perl
Version: 0.15-2
Source Version: 0.15-2
Distribution: sid
Machine Architecture: arm64
Host Architecture: arm64
Build Architecture: arm64
Build Type: binary
I: No tarballs found in /var/lib/debusine/worker/.cache/sbuild
Unpacking /var/lib/debusine/worker/system-images/957781/system.tar.xz to /tmp/tmp.sbuild.kiBHrXIZO7...
I: NOTICE: Log filtering will replace 'sbuild-unshare-dummy-location' with '<<CHROOT>>'
+------------------------------------------------------------------------------+
| Chroot Setup Commands |
+------------------------------------------------------------------------------+
rm -f /etc/resolv.conf
----------------------
I: Finished running 'rm -f /etc/resolv.conf'.
Finished processing commands.
--------------------------------------------------------------------------------
Copying /tmp/debusine-fetch-exec-upload-zz7fc314/dpkg-dbgsym_1.22.12~1.gbp82cafd_arm64.deb to /<<CHROOT>>...
Copying /tmp/debusine-fetch-exec-upload-zz7fc314/dpkg_1.22.12~1.gbp82cafd_arm64.deb to /<<CHROOT>>...
Copying /tmp/debusine-fetch-exec-upload-zz7fc314/dselect-dbgsym_1.22.12~1.gbp82cafd_arm64.deb to /<<CHROOT>>...
Copying /tmp/debusine-fetch-exec-upload-zz7fc314/dselect_1.22.12~1.gbp82cafd_arm64.deb to /<<CHROOT>>...
Copying /tmp/debusine-fetch-exec-upload-zz7fc314/libdpkg-dev_1.22.12~1.gbp82cafd_arm64.deb to /<<CHROOT>>...
Copying /tmp/debusine-fetch-exec-upload-zz7fc314/dpkg-dev_1.22.12~1.gbp82cafd_all.deb to /<<CHROOT>>...
Copying /tmp/debusine-fetch-exec-upload-zz7fc314/libdpkg-perl_1.22.12~1.gbp82cafd_all.deb to /<<CHROOT>>...
I: NOTICE: Log filtering will replace 'build/libthread-tie-perl-NLCuF1/resolver-AL1LSk' with '<<RESOLVERDIR>>'
+------------------------------------------------------------------------------+
| Update chroot |
+------------------------------------------------------------------------------+
Get:1 file:/build/libthread-tie-perl-NLCuF1/resolver-rf9uLj/apt_archive ./ InRelease
Ign:1 file:/build/libthread-tie-perl-NLCuF1/resolver-rf9uLj/apt_archive ./ InRelease
Get:2 file:/build/libthread-tie-perl-NLCuF1/resolver-rf9uLj/apt_archive ./ Release [606 B]
Get:3 http://deb.debian.org/debian sid InRelease [202 kB]
Get:2 file:/build/libthread-tie-perl-NLCuF1/resolver-rf9uLj/apt_archive ./ Release [606 B]
Get:4 file:/build/libthread-tie-perl-NLCuF1/resolver-rf9uLj/apt_archive ./ Release.gpg
Ign:4 file:/build/libthread-tie-perl-NLCuF1/resolver-rf9uLj/apt_archive ./ Release.gpg
Get:5 file:/build/libthread-tie-perl-NLCuF1/resolver-rf9uLj/apt_archive ./ Packages [9246 B]
Get:6 http://deb.debian.org/debian sid/main arm64 Packages [9952 kB]
Get:7 http://deb.debian.org/debian sid/main arm64 Components [4907 kB]
Fetched 15.1 MB in 2s (6461 kB/s)
Reading package lists...
Reading package lists...
Building dependency tree...
Reading state information...
Calculating upgrade...
The following packages will be upgraded:
apt bsdextrautils bsdutils debianutils dpkg dpkg-dev libapt-pkg6.0t64
libaudit-common libaudit1 libblkid1 libbrotli1 libcap-ng0 libdpkg-perl
libglib2.0-0t64 libmarkdown2 libmount1 libpcre2-8-0 libseccomp2 libselinux1
libsemanage2 libsmartcols1 libsystemd0 libudev1 libuuid1 libxml2 login
login.defs mount passwd util-linux
30 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
Need to get 9274 kB/12.8 MB of archives.
After this operation, 603 kB disk space will be freed.
Get:1 http://deb.debian.org/debian sid/main arm64 bsdutils arm64 1:2.40.2-11 [104 kB]
Get:2 file:/build/libthread-tie-perl-NLCuF1/resolver-rf9uLj/apt_archive ./ dpkg 1.22.12~1.gbp82cafd [1513 kB]
Get:3 file:/build/libthread-tie-perl-NLCuF1/resolver-rf9uLj/apt_archive ./ dpkg-dev 1.22.12~1.gbp82cafd [1337 kB]
Get:4 http://deb.debian.org/debian sid/main arm64 debianutils arm64 5.21 [92.1 kB]
Get:5 http://deb.debian.org/debian sid/main arm64 libsystemd0 arm64 257~rc2-3 [416 kB]
Get:6 file:/build/libthread-tie-perl-NLCuF1/resolver-rf9uLj/apt_archive ./ libdpkg-perl 1.22.12~1.gbp82cafd [647 kB]
Get:7 http://deb.debian.org/debian sid/main arm64 libudev1 arm64 257~rc2-3 [139 kB]
Get:8 http://deb.debian.org/debian sid/main arm64 libapt-pkg6.0t64 arm64 2.9.11 [921 kB]
Get:9 http://deb.debian.org/debian sid/main arm64 bsdextrautils arm64 2.40.2-11 [91.2 kB]
Get:10 http://deb.debian.org/debian sid/main arm64 libblkid1 arm64 2.40.2-11 [162 kB]
Get:11 http://deb.debian.org/debian sid/main arm64 libmount1 arm64 2.40.2-11 [190 kB]
Get:12 http://deb.debian.org/debian sid/main arm64 libsmartcols1 arm64 2.40.2-11 [135 kB]
Get:13 http://deb.debian.org/debian sid/main arm64 mount arm64 2.40.2-11 [153 kB]
Get:14 http://deb.debian.org/debian sid/main arm64 libuuid1 arm64 2.40.2-11 [35.7 kB]
Get:15 http://deb.debian.org/debian sid/main arm64 util-linux arm64 2.40.2-11 [1170 kB]
Get:16 http://deb.debian.org/debian sid/main arm64 libpcre2-8-0 arm64 10.44-4 [243 kB]
Get:17 http://deb.debian.org/debian sid/main arm64 libselinux1 arm64 3.7-3+b1 [72.1 kB]
Get:18 http://deb.debian.org/debian sid/main arm64 libseccomp2 arm64 2.5.5-1+b3 [46.8 kB]
Get:19 http://deb.debian.org/debian sid/main arm64 apt arm64 2.9.11 [1287 kB]
Get:20 http://deb.debian.org/debian sid/main arm64 libaudit-common all 1:4.0.2-2 [12.7 kB]
Get:21 http://deb.debian.org/debian sid/main arm64 libcap-ng0 arm64 0.8.5-3+b1 [17.0 kB]
Get:22 http://deb.debian.org/debian sid/main arm64 libaudit1 arm64 1:4.0.2-2 [54.2 kB]
Get:23 http://deb.debian.org/debian sid/main arm64 login arm64 1:4.16.0-2+really2.40.2-11 [80.0 kB]
Get:24 http://deb.debian.org/debian sid/main arm64 login.defs all 1:4.16.0-5 [185 kB]
Get:25 http://deb.debian.org/debian sid/main arm64 libsemanage2 arm64 3.7-2+b1 [84.5 kB]
Get:26 http://deb.debian.org/debian sid/main arm64 passwd arm64 1:4.16.0-5 [1210 kB]
Get:27 http://deb.debian.org/debian sid/main arm64 libbrotli1 arm64 1.1.0-2+b6 [297 kB]
Get:28 http://deb.debian.org/debian sid/main arm64 libglib2.0-0t64 arm64 2.82.2-3 [1411 kB]
Get:29 http://deb.debian.org/debian sid/main arm64 libmarkdown2 arm64 2.2.7-2.1 [33.1 kB]
Get:30 http://deb.debian.org/debian sid/main arm64 libxml2 arm64 2.12.7+dfsg+really2.9.14-0.2+b1 [630 kB]
debconf: delaying package configuration, since apt-utils is not installed
Fetched 9274 kB in 0s (64.0 MB/s)
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 17129 files and directories currently installed.)
Preparing to unpack .../bsdutils_1%3a2.40.2-11_arm64.deb ...
Unpacking bsdutils (1:2.40.2-11) over (1:2.40.2-10) ...
Setting up bsdutils (1:2.40.2-11) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 17129 files and directories currently installed.)
Preparing to unpack .../debianutils_5.21_arm64.deb ...
Unpacking debianutils (5.21) over (5.20+b1) ...
Setting up debianutils (5.21) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 17128 files and directories currently installed.)
Preparing to unpack .../libsystemd0_257~rc2-3_arm64.deb ...
Unpacking libsystemd0:arm64 (257~rc2-3) over (257~rc1-4) ...
Setting up libsystemd0:arm64 (257~rc2-3) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 17128 files and directories currently installed.)
Preparing to unpack .../libudev1_257~rc2-3_arm64.deb ...
Unpacking libudev1:arm64 (257~rc2-3) over (257~rc1-4) ...
Setting up libudev1:arm64 (257~rc2-3) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 17128 files and directories currently installed.)
Preparing to unpack .../libapt-pkg6.0t64_2.9.11_arm64.deb ...
Unpacking libapt-pkg6.0t64:arm64 (2.9.11) over (2.9.10) ...
Setting up libapt-pkg6.0t64:arm64 (2.9.11) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 17128 files and directories currently installed.)
Preparing to unpack .../dpkg_1.22.12~1.gbp82cafd_arm64.deb ...
Unpacking dpkg (1.22.12~1.gbp82cafd) over (1.22.11) ...
Setting up dpkg (1.22.12~1.gbp82cafd) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 17127 files and directories currently installed.)
Preparing to unpack .../bsdextrautils_2.40.2-11_arm64.deb ...
Unpacking bsdextrautils (2.40.2-11) over (2.40.2-10) ...
Preparing to unpack .../libblkid1_2.40.2-11_arm64.deb ...
Unpacking libblkid1:arm64 (2.40.2-11) over (2.40.2-10) ...
Setting up libblkid1:arm64 (2.40.2-11) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 17123 files and directories currently installed.)
Preparing to unpack .../libmount1_2.40.2-11_arm64.deb ...
Unpacking libmount1:arm64 (2.40.2-11) over (2.40.2-10) ...
Setting up libmount1:arm64 (2.40.2-11) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 17123 files and directories currently installed.)
Preparing to unpack .../libsmartcols1_2.40.2-11_arm64.deb ...
Unpacking libsmartcols1:arm64 (2.40.2-11) over (2.40.2-10) ...
Setting up libsmartcols1:arm64 (2.40.2-11) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 17123 files and directories currently installed.)
Preparing to unpack .../mount_2.40.2-11_arm64.deb ...
Unpacking mount (2.40.2-11) over (2.40.2-10) ...
Preparing to unpack .../libuuid1_2.40.2-11_arm64.deb ...
Unpacking libuuid1:arm64 (2.40.2-11) over (2.40.2-10) ...
Setting up libuuid1:arm64 (2.40.2-11) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 17123 files and directories currently installed.)
Preparing to unpack .../util-linux_2.40.2-11_arm64.deb ...
Unpacking util-linux (2.40.2-11) over (2.40.2-10) ...
Setting up util-linux (2.40.2-11) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 17120 files and directories currently installed.)
Preparing to unpack .../libpcre2-8-0_10.44-4_arm64.deb ...
Unpacking libpcre2-8-0:arm64 (10.44-4) over (10.42-4+b2) ...
Setting up libpcre2-8-0:arm64 (10.44-4) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 17119 files and directories currently installed.)
Preparing to unpack .../libselinux1_3.7-3+b1_arm64.deb ...
Unpacking libselinux1:arm64 (3.7-3+b1) over (3.7-3) ...
Setting up libselinux1:arm64 (3.7-3+b1) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 17120 files and directories currently installed.)
Preparing to unpack .../libseccomp2_2.5.5-1+b3_arm64.deb ...
Unpacking libseccomp2:arm64 (2.5.5-1+b3) over (2.5.5-1+b2) ...
Setting up libseccomp2:arm64 (2.5.5-1+b3) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 17120 files and directories currently installed.)
Preparing to unpack .../archives/apt_2.9.11_arm64.deb ...
Unpacking apt (2.9.11) over (2.9.10) ...
Setting up apt (2.9.11) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 17117 files and directories currently installed.)
Preparing to unpack .../libaudit-common_1%3a4.0.2-2_all.deb ...
Unpacking libaudit-common (1:4.0.2-2) over (1:4.0.1-3) ...
Setting up libaudit-common (1:4.0.2-2) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 17117 files and directories currently installed.)
Preparing to unpack .../libcap-ng0_0.8.5-3+b1_arm64.deb ...
Unpacking libcap-ng0:arm64 (0.8.5-3+b1) over (0.8.5-3) ...
Setting up libcap-ng0:arm64 (0.8.5-3+b1) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 17118 files and directories currently installed.)
Preparing to unpack .../libaudit1_1%3a4.0.2-2_arm64.deb ...
Unpacking libaudit1:arm64 (1:4.0.2-2) over (1:4.0.1-3) ...
Setting up libaudit1:arm64 (1:4.0.2-2) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 17118 files and directories currently installed.)
Preparing to unpack .../0-login_1%3a4.16.0-2+really2.40.2-11_arm64.deb ...
Unpacking login (1:4.16.0-2+really2.40.2-11) over (1:4.16.0-2+really2.40.2-10) ...
Preparing to unpack .../1-login.defs_1%3a4.16.0-5_all.deb ...
Unpacking login.defs (1:4.16.0-5) over (1:4.16.0-4) ...
Preparing to unpack .../2-libsemanage2_3.7-2+b1_arm64.deb ...
Unpacking libsemanage2:arm64 (3.7-2+b1) over (3.7-2) ...
Preparing to unpack .../3-passwd_1%3a4.16.0-5_arm64.deb ...
Unpacking passwd (1:4.16.0-5) over (1:4.16.0-4) ...
Preparing to unpack .../4-dpkg-dev_1.22.12~1.gbp82cafd_all.deb ...
Unpacking dpkg-dev (1.22.12~1.gbp82cafd) over (1.22.11) ...
Preparing to unpack .../5-libdpkg-perl_1.22.12~1.gbp82cafd_all.deb ...
Unpacking libdpkg-perl (1.22.12~1.gbp82cafd) over (1.22.11) ...
Preparing to unpack .../6-libbrotli1_1.1.0-2+b6_arm64.deb ...
Unpacking libbrotli1:arm64 (1.1.0-2+b6) over (1.1.0-2+b5) ...
Preparing to unpack .../7-libglib2.0-0t64_2.82.2-3_arm64.deb ...
Unpacking libglib2.0-0t64:arm64 (2.82.2-3) over (2.82.2-2) ...
Preparing to unpack .../8-libmarkdown2_2.2.7-2.1_arm64.deb ...
Unpacking libmarkdown2:arm64 (2.2.7-2.1) over (2.2.7-2+b1) ...
Preparing to unpack .../9-libxml2_2.12.7+dfsg+really2.9.14-0.2+b1_arm64.deb ...
Unpacking libxml2:arm64 (2.12.7+dfsg+really2.9.14-0.2+b1) over (2.12.7+dfsg+really2.9.14-0.1) ...
Setting up bsdextrautils (2.40.2-11) ...
Setting up login.defs (1:4.16.0-5) ...
Installing new version of config file /etc/login.defs ...
Setting up libbrotli1:arm64 (1.1.0-2+b6) ...
Setting up libglib2.0-0t64:arm64 (2.82.2-3) ...
No schema files found: doing nothing.
Setting up libdpkg-perl (1.22.12~1.gbp82cafd) ...
Setting up mount (2.40.2-11) ...
Setting up libsemanage2:arm64 (3.7-2+b1) ...
Setting up libxml2:arm64 (2.12.7+dfsg+really2.9.14-0.2+b1) ...
Setting up libmarkdown2:arm64 (2.2.7-2.1) ...
Setting up login (1:4.16.0-2+really2.40.2-11) ...
Setting up dpkg-dev (1.22.12~1.gbp82cafd) ...
Setting up passwd (1:4.16.0-5) ...
Processing triggers for man-db (2.13.0-1) ...
Processing triggers for libc-bin (2.40-3) ...
+------------------------------------------------------------------------------+
| Fetch source files |
+------------------------------------------------------------------------------+
Local sources
-------------
/tmp/debusine-fetch-exec-upload-zz7fc314/libthread-tie-perl_0.15-2.dsc exists in /tmp/debusine-fetch-exec-upload-zz7fc314; copying to chroot
I: NOTICE: Log filtering will replace 'build/libthread-tie-perl-NLCuF1/libthread-tie-perl-0.15' with '<<PKGBUILDDIR>>'
I: NOTICE: Log filtering will replace 'build/libthread-tie-perl-NLCuF1' with '<<BUILDDIR>>'
+------------------------------------------------------------------------------+
| Install package build dependencies |
+------------------------------------------------------------------------------+
Setup apt archive
-----------------
Merged Build-Depends: debhelper-compat (= 13), build-essential, fakeroot, libload-perl, libthread-serialize-perl, perl
Filtered Build-Depends: debhelper-compat (= 13), build-essential, fakeroot, libload-perl, libthread-serialize-perl, perl
dpkg-deb: warning: root directory has unusual owner or group 998:999.
Hint: either pass --root-owner-group, see dpkg-build-api(7) or add an explicit 'Rules-Requires-Root: no' in debian/control.
dpkg-deb: warning: ignoring 1 warning about the control file(s)
dpkg-deb: building package 'sbuild-build-depends-main-dummy' in '/<<RESOLVERDIR>>/apt_archive/sbuild-build-depends-main-dummy.deb'.
Ign:1 copy:/<<RESOLVERDIR>>/apt_archive ./ InRelease
Get:2 copy:/<<RESOLVERDIR>>/apt_archive ./ Release [609 B]
Ign:3 copy:/<<RESOLVERDIR>>/apt_archive ./ Release.gpg
Get:4 copy:/<<RESOLVERDIR>>/apt_archive ./ Sources [705 B]
Get:5 copy:/<<RESOLVERDIR>>/apt_archive ./ Packages [695 B]
Fetched 2009 B in 0s (185 kB/s)
Reading package lists...
Get:1 file:/<<BUILDDIR>>/resolver-rf9uLj/apt_archive ./ InRelease
Ign:1 file:/<<BUILDDIR>>/resolver-rf9uLj/apt_archive ./ InRelease
Get:2 file:/<<BUILDDIR>>/resolver-rf9uLj/apt_archive ./ Release [606 B]
Get:2 file:/<<BUILDDIR>>/resolver-rf9uLj/apt_archive ./ Release [606 B]
Get:3 file:/<<BUILDDIR>>/resolver-rf9uLj/apt_archive ./ Release.gpg
Ign:3 file:/<<BUILDDIR>>/resolver-rf9uLj/apt_archive ./ Release.gpg
Reading package lists...
Reading package lists...
Install main build dependencies (apt-based resolver)
----------------------------------------------------
Installing build dependencies
Reading package lists...
Building dependency tree...
Reading state information...
The following additional packages will be installed:
autoconf automake autopoint autotools-dev build-essential cpp cpp-14
cpp-14-aarch64-linux-gnu cpp-aarch64-linux-gnu debhelper dh-autoreconf
dh-strip-nondeterminism dwz fakeroot g++ g++-14 g++-14-aarch64-linux-gnu
g++-aarch64-linux-gnu gcc gcc-14 gcc-14-aarch64-linux-gnu
gcc-aarch64-linux-gnu libasan8 libc-dev-bin libc6-dev libcc1-0 libcrypt-dev
libdebhelper-perl libelf1t64 libfakeroot libfile-stripnondeterminism-perl
libgcc-14-dev libhwasan0 libisl23 libitm1 libload-perl liblsan0 libmpc3
libmpfr6 libstdc++-14-dev libthread-serialize-perl libtool libtsan2
libubsan1 linux-libc-dev m4 po-debconf rpcsvc-proto
Suggested packages:
autoconf-archive gnu-standards autoconf-doc cpp-doc gcc-14-locales
cpp-14-doc dh-make gcc-14-doc gcc-multilib manpages-dev flex bison gdb
gcc-doc gdb-aarch64-linux-gnu libc-devtools glibc-doc libstdc++-14-doc
libtool-doc gfortran | fortran95-compiler gcj-jdk m4-doc libmail-box-perl
Recommended packages:
manpages manpages-dev libarchive-cpio-perl libltdl-dev libmail-sendmail-perl
The following NEW packages will be installed:
autoconf automake autopoint autotools-dev build-essential cpp cpp-14
cpp-14-aarch64-linux-gnu cpp-aarch64-linux-gnu debhelper dh-autoreconf
dh-strip-nondeterminism dwz fakeroot g++ g++-14 g++-14-aarch64-linux-gnu
g++-aarch64-linux-gnu gcc gcc-14 gcc-14-aarch64-linux-gnu
gcc-aarch64-linux-gnu libasan8 libc-dev-bin libc6-dev libcc1-0 libcrypt-dev
libdebhelper-perl libelf1t64 libfakeroot libfile-stripnondeterminism-perl
libgcc-14-dev libhwasan0 libisl23 libitm1 libload-perl liblsan0 libmpc3
libmpfr6 libstdc++-14-dev libthread-serialize-perl libtool libtsan2
libubsan1 linux-libc-dev m4 po-debconf rpcsvc-proto
sbuild-build-depends-main-dummy
0 upgraded, 49 newly installed, 0 to remove and 0 not upgraded.
Need to get 61.0 MB of archives.
After this operation, 238 MB of additional disk space will be used.
Get:1 copy:/<<RESOLVERDIR>>/apt_archive ./ sbuild-build-depends-main-dummy 0.invalid.0 [908 B]
Get:2 http://deb.debian.org/debian sid/main arm64 m4 arm64 1.4.19-4 [277 kB]
Get:3 http://deb.debian.org/debian sid/main arm64 autoconf all 2.72-3 [493 kB]
Get:4 http://deb.debian.org/debian sid/main arm64 autotools-dev all 20220109.1 [51.6 kB]
Get:5 http://deb.debian.org/debian sid/main arm64 automake all 1:1.16.5-1.3 [823 kB]
Get:6 http://deb.debian.org/debian sid/main arm64 autopoint all 0.22.5-2 [723 kB]
Get:7 http://deb.debian.org/debian sid/main arm64 libc-dev-bin arm64 2.40-3 [50.9 kB]
Get:8 http://deb.debian.org/debian sid/main arm64 linux-libc-dev all 6.11.7-1 [2454 kB]
Get:9 http://deb.debian.org/debian sid/main arm64 libcrypt-dev arm64 1:4.4.36-5 [122 kB]
Get:10 http://deb.debian.org/debian sid/main arm64 rpcsvc-proto arm64 1.4.3-1+b1 [60.5 kB]
Get:11 http://deb.debian.org/debian sid/main arm64 libc6-dev arm64 2.40-3 [1591 kB]
Get:12 http://deb.debian.org/debian sid/main arm64 libisl23 arm64 0.27-1 [601 kB]
Get:13 http://deb.debian.org/debian sid/main arm64 libmpfr6 arm64 4.2.1-1+b2 [680 kB]
Get:14 http://deb.debian.org/debian sid/main arm64 libmpc3 arm64 1.3.1-1+b3 [50.5 kB]
Get:15 http://deb.debian.org/debian sid/main arm64 cpp-14-aarch64-linux-gnu arm64 14.2.0-8 [9166 kB]
Get:16 http://deb.debian.org/debian sid/main arm64 cpp-14 arm64 14.2.0-8 [1284 B]
Get:17 http://deb.debian.org/debian sid/main arm64 cpp-aarch64-linux-gnu arm64 4:14.2.0-1 [4832 B]
Get:18 http://deb.debian.org/debian sid/main arm64 cpp arm64 4:14.2.0-1 [1568 B]
Get:19 http://deb.debian.org/debian sid/main arm64 libcc1-0 arm64 14.2.0-8 [42.2 kB]
Get:20 http://deb.debian.org/debian sid/main arm64 libitm1 arm64 14.2.0-8 [24.2 kB]
Get:21 http://deb.debian.org/debian sid/main arm64 libasan8 arm64 14.2.0-8 [2579 kB]
Get:22 http://deb.debian.org/debian sid/main arm64 liblsan0 arm64 14.2.0-8 [1161 kB]
Get:23 http://deb.debian.org/debian sid/main arm64 libtsan2 arm64 14.2.0-8 [2386 kB]
Get:24 http://deb.debian.org/debian sid/main arm64 libubsan1 arm64 14.2.0-8 [1039 kB]
Get:25 http://deb.debian.org/debian sid/main arm64 libhwasan0 arm64 14.2.0-8 [1442 kB]
Get:26 http://deb.debian.org/debian sid/main arm64 libgcc-14-dev arm64 14.2.0-8 [2365 kB]
Get:27 http://deb.debian.org/debian sid/main arm64 gcc-14-aarch64-linux-gnu arm64 14.2.0-8 [17.7 MB]
Get:28 http://deb.debian.org/debian sid/main arm64 gcc-14 arm64 14.2.0-8 [519 kB]
Get:29 http://deb.debian.org/debian sid/main arm64 gcc-aarch64-linux-gnu arm64 4:14.2.0-1 [1440 B]
Get:30 http://deb.debian.org/debian sid/main arm64 gcc arm64 4:14.2.0-1 [5136 B]
Get:31 http://deb.debian.org/debian sid/main arm64 libstdc++-14-dev arm64 14.2.0-8 [2267 kB]
Get:32 http://deb.debian.org/debian sid/main arm64 g++-14-aarch64-linux-gnu arm64 14.2.0-8 [10.1 MB]
Get:33 http://deb.debian.org/debian sid/main arm64 g++-14 arm64 14.2.0-8 [20.2 kB]
Get:34 http://deb.debian.org/debian sid/main arm64 g++-aarch64-linux-gnu arm64 4:14.2.0-1 [1200 B]
Get:35 http://deb.debian.org/debian sid/main arm64 g++ arm64 4:14.2.0-1 [1332 B]
Get:36 http://deb.debian.org/debian sid/main arm64 build-essential arm64 12.12 [4624 B]
Get:37 http://deb.debian.org/debian sid/main arm64 libdebhelper-perl all 13.20 [89.7 kB]
Get:38 http://deb.debian.org/debian sid/main arm64 libtool all 2.4.7-8 [517 kB]
Get:39 http://deb.debian.org/debian sid/main arm64 dh-autoreconf all 20 [17.1 kB]
Get:40 http://deb.debian.org/debian sid/main arm64 libfile-stripnondeterminism-perl all 1.14.0-1 [19.5 kB]
Get:41 http://deb.debian.org/debian sid/main arm64 dh-strip-nondeterminism all 1.14.0-1 [8448 B]
Get:42 http://deb.debian.org/debian sid/main arm64 libelf1t64 arm64 0.192-4 [189 kB]
Get:43 http://deb.debian.org/debian sid/main arm64 dwz arm64 0.15-1+b1 [102 kB]
Get:44 http://deb.debian.org/debian sid/main arm64 po-debconf all 1.0.21+nmu1 [248 kB]
Get:45 http://deb.debian.org/debian sid/main arm64 debhelper all 13.20 [915 kB]
Get:46 http://deb.debian.org/debian sid/main arm64 libfakeroot arm64 1.36-1 [29.1 kB]
Get:47 http://deb.debian.org/debian sid/main arm64 fakeroot arm64 1.36-1 [74.4 kB]
Get:48 http://deb.debian.org/debian sid/main arm64 libload-perl all 0.24-1 [23.6 kB]
Get:49 http://deb.debian.org/debian sid/main arm64 libthread-serialize-perl all 1.02-1 [10.6 kB]
debconf: delaying package configuration, since apt-utils is not installed
Fetched 61.0 MB in 1s (103 MB/s)
Selecting previously unselected package m4.
(Reading database ... 17119 files and directories currently installed.)
Preparing to unpack .../00-m4_1.4.19-4_arm64.deb ...
Unpacking m4 (1.4.19-4) ...
Selecting previously unselected package autoconf.
Preparing to unpack .../01-autoconf_2.72-3_all.deb ...
Unpacking autoconf (2.72-3) ...
Selecting previously unselected package autotools-dev.
Preparing to unpack .../02-autotools-dev_20220109.1_all.deb ...
Unpacking autotools-dev (20220109.1) ...
Selecting previously unselected package automake.
Preparing to unpack .../03-automake_1%3a1.16.5-1.3_all.deb ...
Unpacking automake (1:1.16.5-1.3) ...
Selecting previously unselected package autopoint.
Preparing to unpack .../04-autopoint_0.22.5-2_all.deb ...
Unpacking autopoint (0.22.5-2) ...
Selecting previously unselected package libc-dev-bin.
Preparing to unpack .../05-libc-dev-bin_2.40-3_arm64.deb ...
Unpacking libc-dev-bin (2.40-3) ...
Selecting previously unselected package linux-libc-dev.
Preparing to unpack .../06-linux-libc-dev_6.11.7-1_all.deb ...
Unpacking linux-libc-dev (6.11.7-1) ...
Selecting previously unselected package libcrypt-dev:arm64.
Preparing to unpack .../07-libcrypt-dev_1%3a4.4.36-5_arm64.deb ...
Unpacking libcrypt-dev:arm64 (1:4.4.36-5) ...
Selecting previously unselected package rpcsvc-proto.
Preparing to unpack .../08-rpcsvc-proto_1.4.3-1+b1_arm64.deb ...
Unpacking rpcsvc-proto (1.4.3-1+b1) ...
Selecting previously unselected package libc6-dev:arm64.
Preparing to unpack .../09-libc6-dev_2.40-3_arm64.deb ...
Unpacking libc6-dev:arm64 (2.40-3) ...
Selecting previously unselected package libisl23:arm64.
Preparing to unpack .../10-libisl23_0.27-1_arm64.deb ...
Unpacking libisl23:arm64 (0.27-1) ...
Selecting previously unselected package libmpfr6:arm64.
Preparing to unpack .../11-libmpfr6_4.2.1-1+b2_arm64.deb ...
Unpacking libmpfr6:arm64 (4.2.1-1+b2) ...
Selecting previously unselected package libmpc3:arm64.
Preparing to unpack .../12-libmpc3_1.3.1-1+b3_arm64.deb ...
Unpacking libmpc3:arm64 (1.3.1-1+b3) ...
Selecting previously unselected package cpp-14-aarch64-linux-gnu.
Preparing to unpack .../13-cpp-14-aarch64-linux-gnu_14.2.0-8_arm64.deb ...
Unpacking cpp-14-aarch64-linux-gnu (14.2.0-8) ...
Selecting previously unselected package cpp-14.
Preparing to unpack .../14-cpp-14_14.2.0-8_arm64.deb ...
Unpacking cpp-14 (14.2.0-8) ...
Selecting previously unselected package cpp-aarch64-linux-gnu.
Preparing to unpack .../15-cpp-aarch64-linux-gnu_4%3a14.2.0-1_arm64.deb ...
Unpacking cpp-aarch64-linux-gnu (4:14.2.0-1) ...
Selecting previously unselected package cpp.
Preparing to unpack .../16-cpp_4%3a14.2.0-1_arm64.deb ...
Unpacking cpp (4:14.2.0-1) ...
Selecting previously unselected package libcc1-0:arm64.
Preparing to unpack .../17-libcc1-0_14.2.0-8_arm64.deb ...
Unpacking libcc1-0:arm64 (14.2.0-8) ...
Selecting previously unselected package libitm1:arm64.
Preparing to unpack .../18-libitm1_14.2.0-8_arm64.deb ...
Unpacking libitm1:arm64 (14.2.0-8) ...
Selecting previously unselected package libasan8:arm64.
Preparing to unpack .../19-libasan8_14.2.0-8_arm64.deb ...
Unpacking libasan8:arm64 (14.2.0-8) ...
Selecting previously unselected package liblsan0:arm64.
Preparing to unpack .../20-liblsan0_14.2.0-8_arm64.deb ...
Unpacking liblsan0:arm64 (14.2.0-8) ...
Selecting previously unselected package libtsan2:arm64.
Preparing to unpack .../21-libtsan2_14.2.0-8_arm64.deb ...
Unpacking libtsan2:arm64 (14.2.0-8) ...
Selecting previously unselected package libubsan1:arm64.
Preparing to unpack .../22-libubsan1_14.2.0-8_arm64.deb ...
Unpacking libubsan1:arm64 (14.2.0-8) ...
Selecting previously unselected package libhwasan0:arm64.
Preparing to unpack .../23-libhwasan0_14.2.0-8_arm64.deb ...
Unpacking libhwasan0:arm64 (14.2.0-8) ...
Selecting previously unselected package libgcc-14-dev:arm64.
Preparing to unpack .../24-libgcc-14-dev_14.2.0-8_arm64.deb ...
Unpacking libgcc-14-dev:arm64 (14.2.0-8) ...
Selecting previously unselected package gcc-14-aarch64-linux-gnu.
Preparing to unpack .../25-gcc-14-aarch64-linux-gnu_14.2.0-8_arm64.deb ...
Unpacking gcc-14-aarch64-linux-gnu (14.2.0-8) ...
Selecting previously unselected package gcc-14.
Preparing to unpack .../26-gcc-14_14.2.0-8_arm64.deb ...
Unpacking gcc-14 (14.2.0-8) ...
Selecting previously unselected package gcc-aarch64-linux-gnu.
Preparing to unpack .../27-gcc-aarch64-linux-gnu_4%3a14.2.0-1_arm64.deb ...
Unpacking gcc-aarch64-linux-gnu (4:14.2.0-1) ...
Selecting previously unselected package gcc.
Preparing to unpack .../28-gcc_4%3a14.2.0-1_arm64.deb ...
Unpacking gcc (4:14.2.0-1) ...
Selecting previously unselected package libstdc++-14-dev:arm64.
Preparing to unpack .../29-libstdc++-14-dev_14.2.0-8_arm64.deb ...
Unpacking libstdc++-14-dev:arm64 (14.2.0-8) ...
Selecting previously unselected package g++-14-aarch64-linux-gnu.
Preparing to unpack .../30-g++-14-aarch64-linux-gnu_14.2.0-8_arm64.deb ...
Unpacking g++-14-aarch64-linux-gnu (14.2.0-8) ...
Selecting previously unselected package g++-14.
Preparing to unpack .../31-g++-14_14.2.0-8_arm64.deb ...
Unpacking g++-14 (14.2.0-8) ...
Selecting previously unselected package g++-aarch64-linux-gnu.
Preparing to unpack .../32-g++-aarch64-linux-gnu_4%3a14.2.0-1_arm64.deb ...
Unpacking g++-aarch64-linux-gnu (4:14.2.0-1) ...
Selecting previously unselected package g++.
Preparing to unpack .../33-g++_4%3a14.2.0-1_arm64.deb ...
Unpacking g++ (4:14.2.0-1) ...
Selecting previously unselected package build-essential.
Preparing to unpack .../34-build-essential_12.12_arm64.deb ...
Unpacking build-essential (12.12) ...
Selecting previously unselected package libdebhelper-perl.
Preparing to unpack .../35-libdebhelper-perl_13.20_all.deb ...
Unpacking libdebhelper-perl (13.20) ...
Selecting previously unselected package libtool.
Preparing to unpack .../36-libtool_2.4.7-8_all.deb ...
Unpacking libtool (2.4.7-8) ...
Selecting previously unselected package dh-autoreconf.
Preparing to unpack .../37-dh-autoreconf_20_all.deb ...
Unpacking dh-autoreconf (20) ...
Selecting previously unselected package libfile-stripnondeterminism-perl.
Preparing to unpack .../38-libfile-stripnondeterminism-perl_1.14.0-1_all.deb ...
Unpacking libfile-stripnondeterminism-perl (1.14.0-1) ...
Selecting previously unselected package dh-strip-nondeterminism.
Preparing to unpack .../39-dh-strip-nondeterminism_1.14.0-1_all.deb ...
Unpacking dh-strip-nondeterminism (1.14.0-1) ...
Selecting previously unselected package libelf1t64:arm64.
Preparing to unpack .../40-libelf1t64_0.192-4_arm64.deb ...
Unpacking libelf1t64:arm64 (0.192-4) ...
Selecting previously unselected package dwz.
Preparing to unpack .../41-dwz_0.15-1+b1_arm64.deb ...
Unpacking dwz (0.15-1+b1) ...
Selecting previously unselected package po-debconf.
Preparing to unpack .../42-po-debconf_1.0.21+nmu1_all.deb ...
Unpacking po-debconf (1.0.21+nmu1) ...
Selecting previously unselected package debhelper.
Preparing to unpack .../43-debhelper_13.20_all.deb ...
Unpacking debhelper (13.20) ...
Selecting previously unselected package libfakeroot:arm64.
Preparing to unpack .../44-libfakeroot_1.36-1_arm64.deb ...
Unpacking libfakeroot:arm64 (1.36-1) ...
Selecting previously unselected package fakeroot.
Preparing to unpack .../45-fakeroot_1.36-1_arm64.deb ...
Unpacking fakeroot (1.36-1) ...
Selecting previously unselected package libload-perl.
Preparing to unpack .../46-libload-perl_0.24-1_all.deb ...
Unpacking libload-perl (0.24-1) ...
Selecting previously unselected package libthread-serialize-perl.
Preparing to unpack .../47-libthread-serialize-perl_1.02-1_all.deb ...
Unpacking libthread-serialize-perl (1.02-1) ...
Selecting previously unselected package sbuild-build-depends-main-dummy.
Preparing to unpack .../48-sbuild-build-depends-main-dummy_0.invalid.0_arm64.deb ...
Unpacking sbuild-build-depends-main-dummy (0.invalid.0) ...
Setting up libfile-stripnondeterminism-perl (1.14.0-1) ...
Setting up libload-perl (0.24-1) ...
Setting up po-debconf (1.0.21+nmu1) ...
Setting up libdebhelper-perl (13.20) ...
Setting up linux-libc-dev (6.11.7-1) ...
Setting up m4 (1.4.19-4) ...
Setting up libfakeroot:arm64 (1.36-1) ...
Setting up libelf1t64:arm64 (0.192-4) ...
Setting up fakeroot (1.36-1) ...
update-alternatives: using /usr/bin/fakeroot-sysv to provide /usr/bin/fakeroot (fakeroot) in auto mode
Setting up autotools-dev (20220109.1) ...
Setting up rpcsvc-proto (1.4.3-1+b1) ...
Setting up libmpfr6:arm64 (4.2.1-1+b2) ...
Setting up libmpc3:arm64 (1.3.1-1+b3) ...
Setting up autopoint (0.22.5-2) ...
Setting up autoconf (2.72-3) ...
Setting up libubsan1:arm64 (14.2.0-8) ...
Setting up dh-strip-nondeterminism (1.14.0-1) ...
Setting up dwz (0.15-1+b1) ...
Setting up libhwasan0:arm64 (14.2.0-8) ...
Setting up libcrypt-dev:arm64 (1:4.4.36-5) ...
Setting up libasan8:arm64 (14.2.0-8) ...
Setting up libthread-serialize-perl (1.02-1) ...
Setting up libtsan2:arm64 (14.2.0-8) ...
Setting up libisl23:arm64 (0.27-1) ...
Setting up libc-dev-bin (2.40-3) ...
Setting up libcc1-0:arm64 (14.2.0-8) ...
Setting up liblsan0:arm64 (14.2.0-8) ...
Setting up libitm1:arm64 (14.2.0-8) ...
Setting up automake (1:1.16.5-1.3) ...
update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode
Setting up cpp-14-aarch64-linux-gnu (14.2.0-8) ...
Setting up libc6-dev:arm64 (2.40-3) ...
Setting up libgcc-14-dev:arm64 (14.2.0-8) ...
Setting up libstdc++-14-dev:arm64 (14.2.0-8) ...
Setting up cpp-aarch64-linux-gnu (4:14.2.0-1) ...
Setting up cpp-14 (14.2.0-8) ...
Setting up cpp (4:14.2.0-1) ...
Setting up gcc-14-aarch64-linux-gnu (14.2.0-8) ...
Setting up gcc-aarch64-linux-gnu (4:14.2.0-1) ...
Setting up g++-14-aarch64-linux-gnu (14.2.0-8) ...
Setting up gcc-14 (14.2.0-8) ...
Setting up g++-aarch64-linux-gnu (4:14.2.0-1) ...
Setting up g++-14 (14.2.0-8) ...
Setting up libtool (2.4.7-8) ...
Setting up gcc (4:14.2.0-1) ...
Setting up dh-autoreconf (20) ...
Setting up g++ (4:14.2.0-1) ...
update-alternatives: using /usr/bin/g++ to provide /usr/bin/c++ (c++) in auto mode
Setting up build-essential (12.12) ...
Setting up debhelper (13.20) ...
Setting up sbuild-build-depends-main-dummy (0.invalid.0) ...
Processing triggers for man-db (2.13.0-1) ...
Processing triggers for libc-bin (2.40-3) ...
+------------------------------------------------------------------------------+
| Check architectures |
+------------------------------------------------------------------------------+
Arch check ok (arm64 included in all)
+------------------------------------------------------------------------------+
| Build environment |
+------------------------------------------------------------------------------+
Kernel: Linux 6.1.0-27-cloud-arm64 #1 SMP Debian 6.1.115-1 (2024-11-01) arm64 (aarch64)
Toolchain package versions: binutils_2.43.1-5 dpkg-dev_1.22.12~1.gbp82cafd g++-14_14.2.0-8 gcc-14_14.2.0-8 libc6-dev_2.40-3 libstdc++-14-dev_14.2.0-8 libstdc++6_14.2.0-8 linux-libc-dev_6.11.7-1
Package versions: appstream_1.0.3-1+b1 apt_2.9.11 autoconf_2.72-3 automake_1:1.16.5-1.3 autopoint_0.22.5-2 autotools-dev_20220109.1 base-files_13.5 base-passwd_3.6.5 bash_5.2.32-1+b2 binutils_2.43.1-5 binutils-aarch64-linux-gnu_2.43.1-5 binutils-common_2.43.1-5 bsdextrautils_2.40.2-11 bsdutils_1:2.40.2-11 build-essential_12.12 bzip2_1.0.8-6 ca-certificates_20240203 coreutils_9.5-1+b1 cpp_4:14.2.0-1 cpp-14_14.2.0-8 cpp-14-aarch64-linux-gnu_14.2.0-8 cpp-aarch64-linux-gnu_4:14.2.0-1 dash_0.5.12-9+b1 debconf_1.5.87 debhelper_13.20 debian-archive-keyring_2023.4 debianutils_5.21 dh-autoreconf_20 dh-strip-nondeterminism_1.14.0-1 diffstat_1.66-1+b1 diffutils_1:3.10-1+b1 dpkg_1.22.12~1.gbp82cafd dpkg-dev_1.22.12~1.gbp82cafd dwz_0.15-1+b1 e2fsprogs_1.47.1-1+b1 fakeroot_1.36-1 file_1:5.45-3+b1 findutils_4.10.0-3 g++_4:14.2.0-1 g++-14_14.2.0-8 g++-14-aarch64-linux-gnu_14.2.0-8 g++-aarch64-linux-gnu_4:14.2.0-1 gcc_4:14.2.0-1 gcc-14_14.2.0-8 gcc-14-aarch64-linux-gnu_14.2.0-8 gcc-14-base_14.2.0-8 gcc-aarch64-linux-gnu_4:14.2.0-1 gettext_0.22.5-2 gettext-base_0.22.5-2 gpg_2.2.45-2 gpgconf_2.2.45-2 gpgv_2.2.45-2 grep_3.11-4+b1 groff-base_1.23.0-5 gzip_1.12-1.1+b1 hostname_3.25 init-system-helpers_1.67 intltool-debian_0.35.0+20060710.6 iso-codes_4.17.0-1 libacl1_2.3.2-2+b1 libaliased-perl_0.34-3 libappstream5_1.0.3-1+b1 libapt-pkg-perl_0.1.40+b6 libapt-pkg6.0t64_2.9.11 libarchive-zip-perl_1.68-1 libasan8_14.2.0-8 libassuan9_3.0.1-2 libatomic1_14.2.0-8 libattr1_1:2.5.2-2 libaudit-common_1:4.0.2-2 libaudit1_1:4.0.2-2 libb-hooks-endofscope-perl_0.28-1 libb-hooks-op-check-perl_0.22-3+b2 libberkeleydb-perl_0.66-1 libbinutils_2.43.1-5 libblkid1_2.40.2-11 libbrotli1_1.1.0-2+b6 libbsd0_0.12.2-2 libbz2-1.0_1.0.8-6 libc-bin_2.40-3 libc-dev-bin_2.40-3 libc6_2.40-3 libc6-dev_2.40-3 libcap-ng0_0.8.5-3+b1 libcap2_1:2.66-5+b1 libcapture-tiny-perl_0.48-2 libcc1-0_14.2.0-8 libcgi-pm-perl_4.66-1 libclass-data-inheritable-perl_0.10-1 libclass-inspector-perl_1.36-3 libclass-method-modifiers-perl_2.15-1 libclass-xsaccessor-perl_1.19-4+b4 libclone-perl_0.47-1+b1 libcom-err2_1.47.1-1+b1 libconfig-tiny-perl_2.30-1 libconst-fast-perl_0.014-2 libcpanel-json-xs-perl_4.38-1+b1 libcrypt-dev_1:4.4.36-5 libcrypt1_1:4.4.36-5 libctf-nobfd0_2.43.1-5 libctf0_2.43.1-5 libcurl3t64-gnutls_8.11.0-1 libdata-dpath-perl_0.60-1 libdata-messagepack-perl_1.02-1+b4 libdata-optlist-perl_0.114-1 libdata-validate-domain-perl_0.15-1 libdata-validate-ip-perl_0.31-1 libdata-validate-uri-perl_0.07-3 libdb5.3t64_5.3.28+dfsg2-9 libdebconfclient0_0.273 libdebhelper-perl_13.20 libdevel-callchecker-perl_0.009-1+b1 libdevel-size-perl_0.84-1+b1 libdevel-stacktrace-perl_2.0500-1 libdpkg-perl_1.22.12~1.gbp82cafd libdynaloader-functions-perl_0.004-1 libelf1t64_0.192-4 libemail-address-xs-perl_1.05-1+b4 libencode-locale-perl_1.05-3 libexception-class-perl_1.45-1 libext2fs2t64_1.47.1-1+b1 libfakeroot_1.36-1 libffi8_3.4.6-1 libfile-basedir-perl_0.09-2 libfile-find-rule-perl_0.34-3 libfile-listing-perl_6.16-1 libfile-sharedir-perl_1.118-3 libfile-stripnondeterminism-perl_1.14.0-1 libfont-ttf-perl_1.06-2 libgcc-14-dev_14.2.0-8 libgcc-s1_14.2.0-8 libgcrypt20_1.11.0-6 libgdbm-compat4t64_1.24-2 libgdbm6t64_1.24-2 libglib2.0-0t64_2.82.2-3 libgmp10_2:6.3.0+dfsg-2+b2 libgnutls30t64_3.8.8-2 libgomp1_14.2.0-8 libgpg-error0_1.50-4 libgprofng0_2.43.1-5 libgssapi-krb5-2_1.21.3-3 libhogweed6t64_3.10-1+b1 libhtml-form-perl_6.12-1 libhtml-html5-entities-perl_0.004-3 libhtml-parser-perl_3.83-1+b1 libhtml-tagset-perl_3.24-1 libhtml-tokeparser-simple-perl_3.16-4 libhtml-tree-perl_5.07-3 libhttp-cookies-perl_6.11-1 libhttp-date-perl_6.06-1 libhttp-message-perl_7.00-2 libhttp-negotiate-perl_6.01-2 libhwasan0_14.2.0-8 libicu72_72.1-5+b1 libidn2-0_2.3.7-2+b1 libimport-into-perl_1.002005-2 libio-html-perl_1.004-3 libio-interactive-perl_1.025-1 libio-socket-ssl-perl_2.089-1 libio-string-perl_1.08-4 libipc-run3-perl_0.049-1 libipc-system-simple-perl_1.30-2 libisl23_0.27-1 libiterator-perl_0.03+ds1-2 libiterator-util-perl_0.02+ds1-2 libitm1_14.2.0-8 libjansson4_2.14-2+b3 libjson-maybexs-perl_1.004008-1 libk5crypto3_1.21.3-3 libkeyutils1_1.6.3-4 libkrb5-3_1.21.3-3 libkrb5support0_1.21.3-3 libldap-2.5-0_2.5.18+dfsg-3+b1 liblist-compare-perl_0.55-2 liblist-someutils-perl_0.59-1 liblist-utilsby-perl_0.12-2 libload-perl_0.24-1 liblsan0_14.2.0-8 liblwp-mediatypes-perl_6.04-2 liblwp-protocol-https-perl_6.14-1 liblz1_1.15~pre2-1 liblz4-1_1.9.4-3+b1 liblzma5_5.6.3-1+b1 liblzo2-2_2.10-3+b1 libmagic-mgc_1:5.45-3+b1 libmagic1t64_1:5.45-3+b1 libmarkdown2_2.2.7-2.1 libmd0_1.1.0-2+b1 libmldbm-perl_2.05-4 libmodule-implementation-perl_0.09-2 libmodule-runtime-perl_0.016-2 libmoo-perl_2.005005-1 libmoox-aliases-perl_0.001006-2 libmount1_2.40.2-11 libmouse-perl_2.5.11-1+b1 libmpc3_1.3.1-1+b3 libmpfr6_4.2.1-1+b2 libnamespace-clean-perl_0.27-2 libnet-domain-tld-perl_1.75-4 libnet-http-perl_6.23-1 libnet-ipv6addr-perl_1.02-1 libnet-netmask-perl_2.0002-2 libnet-ssleay-perl_1.94-2 libnetaddr-ip-perl_4.079+dfsg-2+b4 libnettle8t64_3.10-1+b1 libnghttp2-14_1.64.0-1 libnghttp3-9_1.4.0-1+b1 libngtcp2-16_1.6.0-1 libngtcp2-crypto-gnutls8_1.6.0-1 libnumber-compare-perl_0.03-3 libp11-kit0_0.25.5-2+b1 libpackage-stash-perl_0.40-1 libpam-modules_1.5.3-7+b1 libpam-modules-bin_1.5.3-7+b1 libpam-runtime_1.5.3-7 libpam0g_1.5.3-7+b1 libparams-classify-perl_0.015-2+b4 libparams-util-perl_1.102-3+b1 libpath-tiny-perl_0.146-1 libpcre2-8-0_10.44-4 libperl5.40_5.40.0-7 libperlio-gzip-perl_0.20-1+b4 libperlio-utf8-strict-perl_0.010-1+b3 libpipeline1_1.5.8-1 libproc-processtable-perl_0.636-1+b3 libpsl5t64_0.21.2-1.1+b1 libreadline8t64_8.2-5 libregexp-wildcards-perl_1.05-3 librole-tiny-perl_2.002004-1 librtmp1_2.4+20151223.gitfa8646d.1-2+b5 libsasl2-2_2.1.28+dfsg1-8 libsasl2-modules-db_2.1.28+dfsg1-8 libseccomp2_2.5.5-1+b3 libselinux1_3.7-3+b1 libsemanage-common_3.7-2 libsemanage2_3.7-2+b1 libsepol2_3.7-1 libsereal-decoder-perl_5.004+ds-1+b3 libsereal-encoder-perl_5.004+ds-1+b3 libsframe1_2.43.1-5 libsmartcols1_2.40.2-11 libsort-versions-perl_1.62-3 libsqlite3-0_3.46.1-1 libss2_1.47.1-1+b1 libssh2-1t64_1.11.1-1 libssl3t64_3.3.2-2 libstdc++-14-dev_14.2.0-8 libstdc++6_14.2.0-8 libstemmer0d_2.2.0-4+b2 libstrictures-perl_2.000006-1 libsub-exporter-perl_0.990-1 libsub-exporter-progressive-perl_0.001013-3 libsub-identify-perl_0.14-3+b3 libsub-install-perl_0.929-1 libsub-name-perl_0.27-1+b3 libsub-quote-perl_2.006008-1 libsyntax-keyword-try-perl_0.30-1+b1 libsystemd0_257~rc2-3 libtasn1-6_4.19.0-3+b3 libterm-readkey-perl_2.38-2+b4 libtext-glob-perl_0.11-3 libtext-levenshteinxs-perl_0.03-5+b4 libtext-markdown-discount-perl_0.16-1+b3 libtext-xslate-perl_3.5.9-2+b1 libthread-serialize-perl_1.02-1 libtime-duration-perl_1.21-2 libtime-moment-perl_0.44-2+b4 libtimedate-perl_2.3300-2 libtinfo6_6.5-2+b1 libtool_2.4.7-8 libtry-tiny-perl_0.32-1 libtsan2_14.2.0-8 libubsan1_14.2.0-8 libuchardet0_0.0.8-1+b2 libudev1_257~rc2-3 libunicode-utf8-perl_0.62-2+b3 libunistring5_1.2-1+b1 liburi-perl_5.30-1 libuuid1_2.40.2-11 libvariable-magic-perl_0.64-1+b1 libwww-mechanize-perl_2.19-1 libwww-perl_6.77-1 libwww-robotrules-perl_6.02-1 libxml-libxml-perl_2.0207+dfsg+really+2.0134-5+b1 libxml-namespacesupport-perl_1.12-2 libxml-sax-base-perl_1.09-3 libxml-sax-perl_1.02+dfsg-3 libxml2_2.12.7+dfsg+really2.9.14-0.2+b1 libxmlb2_0.3.21-1 libxs-parse-keyword-perl_0.46-1+b1 libxxhash0_0.8.2-2+b2 libyaml-0-2_0.2.5-1+b2 libyaml-libyaml-perl_0.902.0+ds-2+b1 libzstd1_1.5.6+dfsg-1+b1 lintian_2.120.0 linux-libc-dev_6.11.7-1 login_1:4.16.0-2+really2.40.2-11 login.defs_1:4.16.0-5 logsave_1.47.1-1+b1 lzop_1.04-2+b1 m4_1.4.19-4 make_4.3-4.1+b1 man-db_2.13.0-1 mawk_1.3.4.20240905-1 mount_2.40.2-11 ncurses-base_6.5-2 ncurses-bin_6.5-2+b1 netbase_6.4 openssl_3.3.2-2 openssl-provider-legacy_3.3.2-2 passwd_1:4.16.0-5 patch_2.7.6-7+b1 patchutils_0.4.2-1+b1 perl_5.40.0-7 perl-base_5.40.0-7 perl-modules-5.40_5.40.0-7 perl-openssl-defaults_7+b2 plzip_1.11-2 po-debconf_1.0.21+nmu1 readline-common_8.2-5 rpcsvc-proto_1.4.3-1+b1 sbuild-build-depends-main-dummy_0.invalid.0 sed_4.9-2+b1 sensible-utils_0.0.24 shared-mime-info_2.4-5+b1 sysvinit-utils_3.11-1 t1utils_1.41-4+b1 tar_1.35+dfsg-3+b1 tzdata_2024b-3 ucf_3.0043+nmu1 unzip_6.0-28+b1 util-linux_2.40.2-11 xz-utils_5.6.3-1+b1 zlib1g_1:1.3.dfsg+really1.3.1-1+b1
+------------------------------------------------------------------------------+
| Build |
+------------------------------------------------------------------------------+
Unpack source
-------------
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA512
Format: 3.0 (quilt)
Source: libthread-tie-perl
Binary: libthread-tie-perl
Architecture: all
Version: 0.15-2
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Uploaders: Christopher Hoskin <mans0954@debian.org>
Homepage: https://metacpan.org/release/Thread-Tie
Standards-Version: 4.6.0
Vcs-Browser: https://salsa.debian.org/perl-team/modules/packages/libthread-tie-perl
Vcs-Git: https://salsa.debian.org/perl-team/modules/packages/libthread-tie-perl.git
Testsuite: autopkgtest-pkg-perl
Build-Depends: debhelper-compat (= 13)
Build-Depends-Indep: libload-perl <!nocheck>, libthread-serialize-perl <!nocheck>, perl
Package-List:
libthread-tie-perl deb perl optional arch=all
Checksums-Sha1:
5b120a7323c40948710ad96bcf36e065ad09b5f4 16416 libthread-tie-perl_0.15.orig.tar.gz
0e462ae8ea247c252a64f423c45dc6d1cc778993 3552 libthread-tie-perl_0.15-2.debian.tar.xz
Checksums-Sha256:
3d287b46ed9616e361916a3d24d7cc607dbe537f7a52e3bcfa2c7c336165ef4f 16416 libthread-tie-perl_0.15.orig.tar.gz
f820edd7883800b69686c236b92f6379b7c69ff839d7a1cdad2ccfecb7365d61 3552 libthread-tie-perl_0.15-2.debian.tar.xz
Files:
c31a536d3a6dd4bdc8eeb4cea24af797 16416 libthread-tie-perl_0.15.orig.tar.gz
c657f4a1f530e83b6282a77ffe3ad6d6 3552 libthread-tie-perl_0.15-2.debian.tar.xz
-----BEGIN PGP SIGNATURE-----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=VoS/
-----END PGP SIGNATURE-----
gpgv: Signature made Fri Oct 14 14:26:25 2022 UTC
gpgv: using RSA key B23862C415D6565A4E86CBD7579C160D4C9E23E8
gpgv: Can't check signature: No public key
dpkg-source: warning: cannot verify inline signature for ./libthread-tie-perl_0.15-2.dsc: no acceptable signature found
dpkg-source: info: extracting libthread-tie-perl in /<<PKGBUILDDIR>>
dpkg-source: info: unpacking libthread-tie-perl_0.15.orig.tar.gz
dpkg-source: info: unpacking libthread-tie-perl_0.15-2.debian.tar.xz
dpkg-source: info: using patch list from debian/patches/series
dpkg-source: info: applying fixpod.patch
Check disk space
----------------
Sufficient free space for build
User Environment
----------------
APT_CONFIG=/var/lib/sbuild/apt.conf
HOME=/sbuild-nonexistent
LANG=en_US.UTF-8
LC_ALL=C.UTF-8
LOGNAME=debusine-worker
PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games
SHELL=/bin/sh
USER=debusine-worker
dpkg-buildpackage
-----------------
Command: dpkg-buildpackage -us -uc -b -rfakeroot
dpkg-buildpackage: info: source package libthread-tie-perl
dpkg-buildpackage: info: source version 0.15-2
dpkg-buildpackage: info: source distribution unstable
dpkg-buildpackage: info: source changed by Jelmer Vernooij <jelmer@debian.org>
dpkg-source --before-build .
dpkg-buildpackage: info: host architecture arm64
debian/rules clean
dh clean
dh_clean
debian/rules binary
dh binary
dh_update_autotools_config
dh_autoreconf
dh_auto_configure
/usr/bin/perl Makefile.PL INSTALLDIRS=vendor "OPTIMIZE=-g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wdate-time -D_FORTIFY_SOURCE=2" "LD=aarch64-linux-gnu-gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wl,-z,relro"
Warning: prerequisite Devel::Required 0 not found.
Checking if your kit is complete...
Looks good
Generating a Unix-style Makefile
Writing Makefile for Thread::Tie
Writing MYMETA.yml and MYMETA.json
dh_auto_build
make -j8
make[1]: Entering directory '/<<PKGBUILDDIR>>'
cp lib/Thread/Tie.pm blib/lib/Thread/Tie.pm
cp lib/Thread/Tie/Thread.pm blib/lib/Thread/Tie/Thread.pm
cp lib/Thread/Tie/Handle.pm blib/lib/Thread/Tie/Handle.pm
cp lib/Thread/Tie/Hash.pm blib/lib/Thread/Tie/Hash.pm
cp lib/Thread/Tie/Scalar.pm blib/lib/Thread/Tie/Scalar.pm
cp lib/Thread/Tie/Array.pm blib/lib/Thread/Tie/Array.pm
Manifying 6 pod documents
make[1]: Leaving directory '/<<PKGBUILDDIR>>'
dh_auto_test
make -j8 test TEST_VERBOSE=1
make[1]: Entering directory '/<<PKGBUILDDIR>>'
PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t
t/Tie01.t ..
1..71
ok 1 - use Thread::Tie::Thread;
ok 2 - Thread::Tie::Thread->can(...)
ok 3 - use Thread::Tie;
ok 4 - Thread::Tie->can(...)
ok 5 - 'check tied object type' isa 'Thread::Tie'
ok 6 - 'check thread object type' isa 'Thread::Tie::Thread'
ok 7 - check tid of thread
ok 8 - 'check thread object type' isa 'threads'
ok 9 - 'check semaphore type' isa 'SCALAR'
ok 10 - check scalar numerical fetch
ok 11 - check scalar increment
ok 12 - check scalar fetch
ok 13 - check scalar fetch
ok 14 - 'check tied object type' isa 'Thread::Tie'
ok 15 - check array fetch
ok 16 - check array fetch
ok 17 - check array fetch
ok 18 - check array fetch
ok 19 - check array fetch
ok 20 - check array fetch
ok 21 - check array fetch
ok 22 - check array fetch
ok 23 - check array fetch
ok 24 - check array fetch
ok 25 - check array fetch
ok 26 - check array fetch
ok 27 - check size
ok 28 - check whether array element exists
ok 29 - check whether array element exists
ok 30 - check number of elements
ok 31 - check array fetch
ok 32 - check whether array element exists
ok 33 - check whether array element exists
ok 34 - check whether array element exists
ok 35 - check whether array element defined
ok 36 - check whether array element defined
ok 37 - check number of elements
ok 38 - check number of elements
ok 39 - check array fetch
ok 40 - 'check tied object type' isa 'Thread::Tie'
ok 41 - check hash fetch
ok 42 - check hash fetch
ok 43 - check hash keys
ok 44 - check existence of key
ok 45 - check existence of key
ok 46 - check hash fetch
ok 47 - check hash keys
ok 48 - check hash keys
ok 49 - check all eaches
ok 50 - check hash keys
ok 51 - check number of elements
ok 52 - check hash fetch
ok 53 - check opening of file
ok 54 - check printing to file
ok 55 - close the file
ok 56 - 'check tied object type' isa 'Thread::Tie'
ok 57 - check contents of file
ok 58 - close the file
ok 59 - check opening of file
ok 60 - check printing to the file
ok 61 - check printing to the file
ok 62 - close the file
ok 63 - check opening of file
ok 64 - check contents of file
ok 65 - unlink testfile
ok 66 - check number of threads
ok 67 - check number of threads
ok 68 - check error message
ok 69 - check error message
ok 70 - check error message
ok 71 - check error message
ok
t/Tie02.t ..
1..26
ok 1 - use Thread::Tie;
ok 2 - 'check object type' isa 'Thread::Tie'
ok 3 - 'check object type' isa 'SCALAR'
ok 4 - check array contents
ok 5 - check array contents
ok 6 - 'check object type' isa 'Thread::Tie'
ok 7 - 'check object type' isa 'SCALAR'
ok 8 - check hash contents
ok 9 - check hash contents
ok 10 - 'check object type' isa 'Thread::Tie'
ok 11 - 'check object type' isa 'SCALAR'
ok 12 - check opening of file
ok 13 - check closing of handle
ok 14 - check opening of file
ok 15 - check file contents
ok 16 - check closing of handle
ok 17 - check removing of file
ok 18 - check opening of file
ok 19 - check closing of handle
ok 20 - 'check object type' isa 'Thread::Tie'
ok 21 - 'check object type' isa 'SCALAR'
ok 22 - check opening of file
ok 23 - check closing of handle
ok 24 - check file contents
ok 25 - check removing of file
ok 26 - check number of threads
ok
All tests successful.
Files=2, Tests=97, 3 wallclock secs ( 0.04 usr 0.01 sys + 3.00 cusr 1.04 csys = 4.09 CPU)
Result: PASS
make[1]: Leaving directory '/<<PKGBUILDDIR>>'
create-stamp debian/debhelper-build-stamp
dh_prep
dh_auto_install --destdir=debian/libthread-tie-perl/
make -j8 install DESTDIR=/<<PKGBUILDDIR>>/debian/libthread-tie-perl AM_UPDATE_INFO_DIR=no PREFIX=/usr
make[1]: Entering directory '/<<PKGBUILDDIR>>'
Manifying 6 pod documents
Installing /<<PKGBUILDDIR>>/debian/libthread-tie-perl/usr/share/perl5/Thread/Tie.pm
Installing /<<PKGBUILDDIR>>/debian/libthread-tie-perl/usr/share/perl5/Thread/Tie/Array.pm
Installing /<<PKGBUILDDIR>>/debian/libthread-tie-perl/usr/share/perl5/Thread/Tie/Handle.pm
Installing /<<PKGBUILDDIR>>/debian/libthread-tie-perl/usr/share/perl5/Thread/Tie/Thread.pm
Installing /<<PKGBUILDDIR>>/debian/libthread-tie-perl/usr/share/perl5/Thread/Tie/Hash.pm
Installing /<<PKGBUILDDIR>>/debian/libthread-tie-perl/usr/share/perl5/Thread/Tie/Scalar.pm
Installing /<<PKGBUILDDIR>>/debian/libthread-tie-perl/usr/share/man/man3/Thread::Tie::Hash.3pm
Installing /<<PKGBUILDDIR>>/debian/libthread-tie-perl/usr/share/man/man3/Thread::Tie::Scalar.3pm
Installing /<<PKGBUILDDIR>>/debian/libthread-tie-perl/usr/share/man/man3/Thread::Tie::Thread.3pm
Installing /<<PKGBUILDDIR>>/debian/libthread-tie-perl/usr/share/man/man3/Thread::Tie::Handle.3pm
Installing /<<PKGBUILDDIR>>/debian/libthread-tie-perl/usr/share/man/man3/Thread::Tie.3pm
Installing /<<PKGBUILDDIR>>/debian/libthread-tie-perl/usr/share/man/man3/Thread::Tie::Array.3pm
make[1]: Leaving directory '/<<PKGBUILDDIR>>'
dh_installdocs
dh_installchangelogs
dh_installman
dh_perl
dh_link
dh_strip_nondeterminism
dh_compress
dh_fixperms
dh_missing
dh_installdeb
dh_gencontrol
dh_md5sums
dh_builddeb
dpkg-deb: building package 'libthread-tie-perl' in '../libthread-tie-perl_0.15-2_all.deb'.
dpkg-genbuildinfo --build=binary -O../libthread-tie-perl_0.15-2_arm64.buildinfo
dpkg-genchanges --build=binary -O../libthread-tie-perl_0.15-2_arm64.changes
dpkg-genchanges: info: binary-only upload (no source code included)
dpkg-source --after-build .
dpkg-buildpackage: info: binary-only upload (no source included)
--------------------------------------------------------------------------------
Build finished at 2024-11-17T07:07:45Z
Finished
--------
I: Built successfully
+------------------------------------------------------------------------------+
| Changes |
+------------------------------------------------------------------------------+
libthread-tie-perl_0.15-2_arm64.changes:
----------------------------------------
Format: 1.8
Date: Fri, 14 Oct 2022 15:25:47 +0100
Source: libthread-tie-perl
Binary: libthread-tie-perl
Architecture: all
Version: 0.15-2
Distribution: sid
Urgency: medium
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Changed-By: Jelmer Vernooij <jelmer@debian.org>
Description:
libthread-tie-perl - alternative separate thread implementation of shared variables
Changes:
libthread-tie-perl (0.15-2) unstable; urgency=medium
.
[ Debian Janitor ]
* Set upstream metadata fields: Bug-Database, Bug-Submit.
* Update standards version to 4.5.0, no changes needed.
* Bump debhelper from old 12 to 13.
* Update standards version to 4.5.1, no changes needed.
* Update standards version to 4.6.0, no changes needed.
Checksums-Sha1:
a467ebdc997db66871be53f37be1af910f197971 27444 libthread-tie-perl_0.15-2_all.deb
4efdb3b60d4a991b344d3a79eb1e3953e767262d 4697 libthread-tie-perl_0.15-2_arm64.buildinfo
Checksums-Sha256:
2d4a55d6b20ec5ef63af20c213507af951f8c7187fa2fd3981bd8371e16c4a3d 27444 libthread-tie-perl_0.15-2_all.deb
dae1562f52fc27a4fbaea4d84eceea9f3585646b167bd740a51af4d30d6f83b1 4697 libthread-tie-perl_0.15-2_arm64.buildinfo
Files:
accc354ebbb0d80d80d4c60b429425c3 27444 perl optional libthread-tie-perl_0.15-2_all.deb
1e684ec8ed6419e874cba4d57c6e0093 4697 perl optional libthread-tie-perl_0.15-2_arm64.buildinfo
+------------------------------------------------------------------------------+
| Buildinfo |
+------------------------------------------------------------------------------+
Format: 1.0
Source: libthread-tie-perl
Binary: libthread-tie-perl
Architecture: all
Version: 0.15-2
Checksums-Md5:
accc354ebbb0d80d80d4c60b429425c3 27444 libthread-tie-perl_0.15-2_all.deb
Checksums-Sha1:
a467ebdc997db66871be53f37be1af910f197971 27444 libthread-tie-perl_0.15-2_all.deb
Checksums-Sha256:
2d4a55d6b20ec5ef63af20c213507af951f8c7187fa2fd3981bd8371e16c4a3d 27444 libthread-tie-perl_0.15-2_all.deb
Build-Origin: Debian
Build-Architecture: arm64
Build-Date: Sun, 17 Nov 2024 07:07:45 +0000
Build-Path: /<<PKGBUILDDIR>>
Build-Tainted-By:
merged-usr-via-aliased-dirs
Installed-Build-Depends:
autoconf (= 2.72-3),
automake (= 1:1.16.5-1.3),
autopoint (= 0.22.5-2),
autotools-dev (= 20220109.1),
base-files (= 13.5),
base-passwd (= 3.6.5),
bash (= 5.2.32-1+b2),
binutils (= 2.43.1-5),
binutils-aarch64-linux-gnu (= 2.43.1-5),
binutils-common (= 2.43.1-5),
bsdextrautils (= 2.40.2-11),
bsdutils (= 1:2.40.2-11),
build-essential (= 12.12),
bzip2 (= 1.0.8-6),
coreutils (= 9.5-1+b1),
cpp (= 4:14.2.0-1),
cpp-14 (= 14.2.0-8),
cpp-14-aarch64-linux-gnu (= 14.2.0-8),
cpp-aarch64-linux-gnu (= 4:14.2.0-1),
dash (= 0.5.12-9+b1),
debconf (= 1.5.87),
debhelper (= 13.20),
debianutils (= 5.21),
dh-autoreconf (= 20),
dh-strip-nondeterminism (= 1.14.0-1),
diffutils (= 1:3.10-1+b1),
dpkg (= 1.22.12~1.gbp82cafd),
dpkg-dev (= 1.22.12~1.gbp82cafd),
dwz (= 0.15-1+b1),
file (= 1:5.45-3+b1),
findutils (= 4.10.0-3),
g++ (= 4:14.2.0-1),
g++-14 (= 14.2.0-8),
g++-14-aarch64-linux-gnu (= 14.2.0-8),
g++-aarch64-linux-gnu (= 4:14.2.0-1),
gcc (= 4:14.2.0-1),
gcc-14 (= 14.2.0-8),
gcc-14-aarch64-linux-gnu (= 14.2.0-8),
gcc-14-base (= 14.2.0-8),
gcc-aarch64-linux-gnu (= 4:14.2.0-1),
gettext (= 0.22.5-2),
gettext-base (= 0.22.5-2),
grep (= 3.11-4+b1),
groff-base (= 1.23.0-5),
gzip (= 1.12-1.1+b1),
hostname (= 3.25),
init-system-helpers (= 1.67),
intltool-debian (= 0.35.0+20060710.6),
libacl1 (= 2.3.2-2+b1),
libarchive-zip-perl (= 1.68-1),
libasan8 (= 14.2.0-8),
libatomic1 (= 14.2.0-8),
libattr1 (= 1:2.5.2-2),
libaudit-common (= 1:4.0.2-2),
libaudit1 (= 1:4.0.2-2),
libbinutils (= 2.43.1-5),
libblkid1 (= 2.40.2-11),
libbz2-1.0 (= 1.0.8-6),
libc-bin (= 2.40-3),
libc-dev-bin (= 2.40-3),
libc6 (= 2.40-3),
libc6-dev (= 2.40-3),
libcap-ng0 (= 0.8.5-3+b1),
libcap2 (= 1:2.66-5+b1),
libcc1-0 (= 14.2.0-8),
libcrypt-dev (= 1:4.4.36-5),
libcrypt1 (= 1:4.4.36-5),
libctf-nobfd0 (= 2.43.1-5),
libctf0 (= 2.43.1-5),
libdb5.3t64 (= 5.3.28+dfsg2-9),
libdebconfclient0 (= 0.273),
libdebhelper-perl (= 13.20),
libdpkg-perl (= 1.22.12~1.gbp82cafd),
libelf1t64 (= 0.192-4),
libfile-stripnondeterminism-perl (= 1.14.0-1),
libgcc-14-dev (= 14.2.0-8),
libgcc-s1 (= 14.2.0-8),
libgdbm-compat4t64 (= 1.24-2),
libgdbm6t64 (= 1.24-2),
libgmp10 (= 2:6.3.0+dfsg-2+b2),
libgomp1 (= 14.2.0-8),
libgprofng0 (= 2.43.1-5),
libhwasan0 (= 14.2.0-8),
libicu72 (= 72.1-5+b1),
libisl23 (= 0.27-1),
libitm1 (= 14.2.0-8),
libjansson4 (= 2.14-2+b3),
libload-perl (= 0.24-1),
liblsan0 (= 14.2.0-8),
liblzma5 (= 5.6.3-1+b1),
libmagic-mgc (= 1:5.45-3+b1),
libmagic1t64 (= 1:5.45-3+b1),
libmd0 (= 1.1.0-2+b1),
libmount1 (= 2.40.2-11),
libmpc3 (= 1.3.1-1+b3),
libmpfr6 (= 4.2.1-1+b2),
libpam-modules (= 1.5.3-7+b1),
libpam-modules-bin (= 1.5.3-7+b1),
libpam-runtime (= 1.5.3-7),
libpam0g (= 1.5.3-7+b1),
libpcre2-8-0 (= 10.44-4),
libperl5.40 (= 5.40.0-7),
libpipeline1 (= 1.5.8-1),
libseccomp2 (= 2.5.5-1+b3),
libselinux1 (= 3.7-3+b1),
libsframe1 (= 2.43.1-5),
libsmartcols1 (= 2.40.2-11),
libssl3t64 (= 3.3.2-2),
libstdc++-14-dev (= 14.2.0-8),
libstdc++6 (= 14.2.0-8),
libsystemd0 (= 257~rc2-3),
libthread-serialize-perl (= 1.02-1),
libtinfo6 (= 6.5-2+b1),
libtool (= 2.4.7-8),
libtsan2 (= 14.2.0-8),
libubsan1 (= 14.2.0-8),
libuchardet0 (= 0.0.8-1+b2),
libudev1 (= 257~rc2-3),
libunistring5 (= 1.2-1+b1),
libuuid1 (= 2.40.2-11),
libxml2 (= 2.12.7+dfsg+really2.9.14-0.2+b1),
libzstd1 (= 1.5.6+dfsg-1+b1),
linux-libc-dev (= 6.11.7-1),
m4 (= 1.4.19-4),
make (= 4.3-4.1+b1),
man-db (= 2.13.0-1),
mawk (= 1.3.4.20240905-1),
ncurses-base (= 6.5-2),
ncurses-bin (= 6.5-2+b1),
openssl-provider-legacy (= 3.3.2-2),
patch (= 2.7.6-7+b1),
perl (= 5.40.0-7),
perl-base (= 5.40.0-7),
perl-modules-5.40 (= 5.40.0-7),
po-debconf (= 1.0.21+nmu1),
rpcsvc-proto (= 1.4.3-1+b1),
sed (= 4.9-2+b1),
sensible-utils (= 0.0.24),
sysvinit-utils (= 3.11-1),
tar (= 1.35+dfsg-3+b1),
util-linux (= 2.40.2-11),
xz-utils (= 5.6.3-1+b1),
zlib1g (= 1:1.3.dfsg+really1.3.1-1+b1)
Environment:
DEB_BUILD_OPTIONS="parallel=8"
LANG="en_US.UTF-8"
LC_ALL="C.UTF-8"
SOURCE_DATE_EPOCH="1665757547"
+------------------------------------------------------------------------------+
| Package contents |
+------------------------------------------------------------------------------+
libthread-tie-perl_0.15-2_all.deb
---------------------------------
new Debian package, version 2.0.
size 27444 bytes: control archive=1840 bytes.
2557 bytes, 49 lines control
1201 bytes, 16 lines md5sums
Package: libthread-tie-perl
Version: 0.15-2
Architecture: all
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Installed-Size: 79
Depends: perl:any, libload-perl, libthread-serialize-perl
Section: perl
Priority: optional
Homepage: https://metacpan.org/release/Thread-Tie
Description: alternative separate thread implementation of shared variables
The standard shared variable scheme used by Perl, is based on tie-ing the
variable to some very special dark magic. This dark magic ensures that shared
variables, which are copied just as any other variable when a thread is
started, update values in all of the threads where they exist as soon as the
value of a shared variable is changed.
.
The Thread::Tie module is a proof-of-concept implementation of another approach
to shared variables. Instead of having shared variables exist in all the
threads from which they are accessible, shared variable exist as "normal",
unshared variables in a separate thread. Only a tied object exists in each
thread from which the shared variable is accessible.
.
Through the use of a client-server model, any thread can fetch and/or update
variables living in that thread. This client-server functionality is hidden
under the hood of tie(). So you could say that one dark magic (the current
shared variables implementation) is replaced by another dark magic.
.
The Thread::Tie approach has the following advantages:
.
* Memory usage - This implementation circumvents the memory leak that
currently (threads::shared version 0.90) plagues any shared array or shared
hash access.
* Tieing shared variables - Because the current implementation uses tie-ing,
you can not tie a shared variable. The same applies for this implementation
you might say. However, it is possible to specify a non-standard tie
implementation for use within the thread. So with this implementation you
can tie() a shared variable. So you could tie a shared hash to a DBM file à
la dbmopen() with this module.
.
Of course there are disadvantages to this approach:
.
* Pure Perl implementation - This module is currently a pure Perl
implementation. This is ok for a proof of concept, but may need re-
implementation in pure XS or in Inline::C for production use.
.
* Tradeoff between cpu and memory - This implementation currently uses (much)
more cpu than the standard shared variables implementation. Whether this
would still be true when re-implemented in XS or Inline::C, remains to be
seen.
drwxr-xr-x root/root 0 2022-10-14 14:25 ./
drwxr-xr-x root/root 0 2022-10-14 14:25 ./usr/
drwxr-xr-x root/root 0 2022-10-14 14:25 ./usr/share/
drwxr-xr-x root/root 0 2022-10-14 14:25 ./usr/share/doc/
drwxr-xr-x root/root 0 2022-10-14 14:25 ./usr/share/doc/libthread-tie-perl/
-rw-r--r-- root/root 266 2004-05-12 13:33 ./usr/share/doc/libthread-tie-perl/TODO
-rw-r--r-- root/root 831 2022-10-14 14:25 ./usr/share/doc/libthread-tie-perl/changelog.Debian.gz
-rw-r--r-- root/root 2642 2019-11-14 13:18 ./usr/share/doc/libthread-tie-perl/changelog.gz
-rw-r--r-- root/root 1128 2022-10-14 14:25 ./usr/share/doc/libthread-tie-perl/copyright
drwxr-xr-x root/root 0 2022-10-14 14:25 ./usr/share/man/
drwxr-xr-x root/root 0 2022-10-14 14:25 ./usr/share/man/man3/
-rw-r--r-- root/root 4848 2022-10-14 14:25 ./usr/share/man/man3/Thread::Tie.3pm.gz
-rw-r--r-- root/root 1135 2022-10-14 14:25 ./usr/share/man/man3/Thread::Tie::Array.3pm.gz
-rw-r--r-- root/root 1137 2022-10-14 14:25 ./usr/share/man/man3/Thread::Tie::Handle.3pm.gz
-rw-r--r-- root/root 1136 2022-10-14 14:25 ./usr/share/man/man3/Thread::Tie::Hash.3pm.gz
-rw-r--r-- root/root 1136 2022-10-14 14:25 ./usr/share/man/man3/Thread::Tie::Scalar.3pm.gz
-rw-r--r-- root/root 1941 2022-10-14 14:25 ./usr/share/man/man3/Thread::Tie::Thread.3pm.gz
drwxr-xr-x root/root 0 2022-10-14 14:25 ./usr/share/perl5/
drwxr-xr-x root/root 0 2022-10-14 14:25 ./usr/share/perl5/Thread/
-rw-r--r-- root/root 18670 2022-10-14 14:25 ./usr/share/perl5/Thread/Tie.pm
drwxr-xr-x root/root 0 2022-10-14 14:25 ./usr/share/perl5/Thread/Tie/
-rw-r--r-- root/root 4179 2019-11-14 13:18 ./usr/share/perl5/Thread/Tie/Array.pm
-rw-r--r-- root/root 5057 2019-11-14 13:18 ./usr/share/perl5/Thread/Tie/Handle.pm
-rw-r--r-- root/root 2874 2019-11-14 13:18 ./usr/share/perl5/Thread/Tie/Hash.pm
-rw-r--r-- root/root 1828 2019-11-14 13:18 ./usr/share/perl5/Thread/Tie/Scalar.pm
-rw-r--r-- root/root 11574 2019-11-14 13:18 ./usr/share/perl5/Thread/Tie/Thread.pm
lintian
-------
Setup apt archive
-----------------
Merged Build-Depends: lintian
Filtered Build-Depends: lintian
dpkg-deb: warning: root directory has unusual owner or group 998:999.
Hint: either pass --root-owner-group, see dpkg-build-api(7) or add an explicit 'Rules-Requires-Root: no' in debian/control.
dpkg-deb: warning: ignoring 1 warning about the control file(s)
dpkg-deb: building package 'sbuild-build-depends-lintian-dummy' in '/<<RESOLVERDIR>>/apt_archive/sbuild-build-depends-lintian-dummy.deb'.
Ign:1 copy:/<<RESOLVERDIR>>/apt_archive ./ InRelease
Get:2 copy:/<<RESOLVERDIR>>/apt_archive ./ Release [615 B]
Ign:3 copy:/<<RESOLVERDIR>>/apt_archive ./ Release.gpg
Get:4 copy:/<<RESOLVERDIR>>/apt_archive ./ Sources [1287 B]
Get:5 copy:/<<RESOLVERDIR>>/apt_archive ./ Packages [1307 B]
Fetched 3209 B in 0s (268 kB/s)
Reading package lists...
Get:1 file:/<<BUILDDIR>>/resolver-rf9uLj/apt_archive ./ InRelease
Ign:1 file:/<<BUILDDIR>>/resolver-rf9uLj/apt_archive ./ InRelease
Get:2 file:/<<BUILDDIR>>/resolver-rf9uLj/apt_archive ./ Release [606 B]
Get:2 file:/<<BUILDDIR>>/resolver-rf9uLj/apt_archive ./ Release [606 B]
Get:3 file:/<<BUILDDIR>>/resolver-rf9uLj/apt_archive ./ Release.gpg
Ign:3 file:/<<BUILDDIR>>/resolver-rf9uLj/apt_archive ./ Release.gpg
Reading package lists...
Reading package lists...
Install lintian build dependencies (apt-based resolver)
-------------------------------------------------------
Installing build dependencies
Reading package lists...
Building dependency tree...
Reading state information...
The following NEW packages will be installed:
sbuild-build-depends-lintian-dummy
0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded.
Need to get 852 B of archives.
After this operation, 0 B of additional disk space will be used.
Get:1 copy:/<<RESOLVERDIR>>/apt_archive ./ sbuild-build-depends-lintian-dummy 0.invalid.0 [852 B]
debconf: delaying package configuration, since apt-utils is not installed
Fetched 852 B in 0s (0 B/s)
Selecting previously unselected package sbuild-build-depends-lintian-dummy.
(Reading database ... 22557 files and directories currently installed.)
Preparing to unpack .../sbuild-build-depends-lintian-dummy_0.invalid.0_arm64.deb ...
Unpacking sbuild-build-depends-lintian-dummy (0.invalid.0) ...
Setting up sbuild-build-depends-lintian-dummy (0.invalid.0) ...
Running lintian...
W: libthread-tie-perl changes: distribution-and-changes-mismatch sid unstable
W: libthread-tie-perl source: no-nmu-in-changelog [debian/changelog:1]
W: libthread-tie-perl source: source-nmu-has-incorrect-version-number 0.15-2 [debian/changelog:1]
I: Lintian run was successful.
+------------------------------------------------------------------------------+
| Post Build |
+------------------------------------------------------------------------------+
+------------------------------------------------------------------------------+
| Cleanup |
+------------------------------------------------------------------------------+
Purging /<<BUILDDIR>>
Not cleaning session: cloned chroot in use
+------------------------------------------------------------------------------+
| Summary |
+------------------------------------------------------------------------------+
Build Architecture: arm64
Build Type: binary
Build-Space: 672
Build-Time: 9
Distribution: sid
Host Architecture: arm64
Install-Time: 16
Job: /tmp/debusine-fetch-exec-upload-zz7fc314/libthread-tie-perl_0.15-2.dsc
Lintian: warn
Machine Architecture: arm64
Package: libthread-tie-perl
Package-Time: 60
Source-Version: 0.15-2
Space: 672
Status: successful
Version: 0.15-2
--------------------------------------------------------------------------------
Finished at 2024-11-17T07:07:45Z
Build needed 00:01:00, 672k disk space