sbuild (Debian sbuild) 0.86.3~bpo12+1 (03 November 2024) on debusine-worker-arm64-demeter-09.freexian.com
+==============================================================================+
| maildrop 2.9.3-2.1 (arm64) Sun, 17 Nov 2024 10:58:18 +0000 |
+==============================================================================+
Package: maildrop
Version: 2.9.3-2.1
Source Version: 2.9.3-2.1
Distribution: sid
Machine Architecture: arm64
Host Architecture: arm64
Build Architecture: arm64
Build Type: binary
I: No tarballs found in /var/lib/debusine/worker/.cache/sbuild
Unpacking /var/lib/debusine/worker/system-images/957781/system.tar.xz to /tmp/tmp.sbuild.K8TLQRIwN8...
I: NOTICE: Log filtering will replace 'sbuild-unshare-dummy-location' with '<<CHROOT>>'
+------------------------------------------------------------------------------+
| Chroot Setup Commands |
+------------------------------------------------------------------------------+
rm -f /etc/resolv.conf
----------------------
I: Finished running 'rm -f /etc/resolv.conf'.
Finished processing commands.
--------------------------------------------------------------------------------
Copying /tmp/debusine-fetch-exec-upload-mvi7h4wb/dpkg-dbgsym_1.22.12~1.gbp82cafd_arm64.deb to /<<CHROOT>>...
Copying /tmp/debusine-fetch-exec-upload-mvi7h4wb/dpkg_1.22.12~1.gbp82cafd_arm64.deb to /<<CHROOT>>...
Copying /tmp/debusine-fetch-exec-upload-mvi7h4wb/dselect-dbgsym_1.22.12~1.gbp82cafd_arm64.deb to /<<CHROOT>>...
Copying /tmp/debusine-fetch-exec-upload-mvi7h4wb/dselect_1.22.12~1.gbp82cafd_arm64.deb to /<<CHROOT>>...
Copying /tmp/debusine-fetch-exec-upload-mvi7h4wb/libdpkg-dev_1.22.12~1.gbp82cafd_arm64.deb to /<<CHROOT>>...
Copying /tmp/debusine-fetch-exec-upload-mvi7h4wb/dpkg-dev_1.22.12~1.gbp82cafd_all.deb to /<<CHROOT>>...
Copying /tmp/debusine-fetch-exec-upload-mvi7h4wb/libdpkg-perl_1.22.12~1.gbp82cafd_all.deb to /<<CHROOT>>...
I: NOTICE: Log filtering will replace 'build/maildrop-ppW5LN/resolver-XTx0sJ' with '<<RESOLVERDIR>>'
+------------------------------------------------------------------------------+
| Update chroot |
+------------------------------------------------------------------------------+
Get:1 file:/build/maildrop-ppW5LN/resolver-Anq0aG/apt_archive ./ InRelease
Ign:1 file:/build/maildrop-ppW5LN/resolver-Anq0aG/apt_archive ./ InRelease
Get:2 file:/build/maildrop-ppW5LN/resolver-Anq0aG/apt_archive ./ Release [606 B]
Get:3 http://deb.debian.org/debian sid InRelease [202 kB]
Get:2 file:/build/maildrop-ppW5LN/resolver-Anq0aG/apt_archive ./ Release [606 B]
Get:4 file:/build/maildrop-ppW5LN/resolver-Anq0aG/apt_archive ./ Release.gpg
Ign:4 file:/build/maildrop-ppW5LN/resolver-Anq0aG/apt_archive ./ Release.gpg
Get:5 file:/build/maildrop-ppW5LN/resolver-Anq0aG/apt_archive ./ Packages [9246 B]
Get:6 http://deb.debian.org/debian sid/main arm64 Packages [9952 kB]
Get:7 http://deb.debian.org/debian sid/main arm64 Components [4909 kB]
Fetched 15.1 MB in 2s (6394 kB/s)
Reading package lists...
Reading package lists...
Building dependency tree...
Reading state information...
Calculating upgrade...
The following packages will be upgraded:
apt bsdextrautils bsdutils debianutils dpkg dpkg-dev libapt-pkg6.0t64
libaudit-common libaudit1 libblkid1 libbrotli1 libcap-ng0 libdpkg-perl
libglib2.0-0t64 libmarkdown2 libmount1 libpcre2-8-0 libseccomp2 libselinux1
libsemanage2 libsmartcols1 libsystemd0 libudev1 libuuid1 libxml2 login
login.defs mount passwd util-linux
30 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
Need to get 9274 kB/12.8 MB of archives.
After this operation, 603 kB disk space will be freed.
Get:1 file:/build/maildrop-ppW5LN/resolver-Anq0aG/apt_archive ./ dpkg 1.22.12~1.gbp82cafd [1513 kB]
Get:2 file:/build/maildrop-ppW5LN/resolver-Anq0aG/apt_archive ./ dpkg-dev 1.22.12~1.gbp82cafd [1337 kB]
Get:3 http://deb.debian.org/debian sid/main arm64 bsdutils arm64 1:2.40.2-11 [104 kB]
Get:4 file:/build/maildrop-ppW5LN/resolver-Anq0aG/apt_archive ./ libdpkg-perl 1.22.12~1.gbp82cafd [647 kB]
Get:5 http://deb.debian.org/debian sid/main arm64 debianutils arm64 5.21 [92.1 kB]
Get:6 http://deb.debian.org/debian sid/main arm64 libsystemd0 arm64 257~rc2-3 [416 kB]
Get:7 http://deb.debian.org/debian sid/main arm64 libudev1 arm64 257~rc2-3 [139 kB]
Get:8 http://deb.debian.org/debian sid/main arm64 libapt-pkg6.0t64 arm64 2.9.11 [921 kB]
Get:9 http://deb.debian.org/debian sid/main arm64 bsdextrautils arm64 2.40.2-11 [91.2 kB]
Get:10 http://deb.debian.org/debian sid/main arm64 libblkid1 arm64 2.40.2-11 [162 kB]
Get:11 http://deb.debian.org/debian sid/main arm64 libmount1 arm64 2.40.2-11 [190 kB]
Get:12 http://deb.debian.org/debian sid/main arm64 libsmartcols1 arm64 2.40.2-11 [135 kB]
Get:13 http://deb.debian.org/debian sid/main arm64 mount arm64 2.40.2-11 [153 kB]
Get:14 http://deb.debian.org/debian sid/main arm64 libuuid1 arm64 2.40.2-11 [35.7 kB]
Get:15 http://deb.debian.org/debian sid/main arm64 util-linux arm64 2.40.2-11 [1170 kB]
Get:16 http://deb.debian.org/debian sid/main arm64 libpcre2-8-0 arm64 10.44-4 [243 kB]
Get:17 http://deb.debian.org/debian sid/main arm64 libselinux1 arm64 3.7-3+b1 [72.1 kB]
Get:18 http://deb.debian.org/debian sid/main arm64 libseccomp2 arm64 2.5.5-1+b3 [46.8 kB]
Get:19 http://deb.debian.org/debian sid/main arm64 apt arm64 2.9.11 [1287 kB]
Get:20 http://deb.debian.org/debian sid/main arm64 libaudit-common all 1:4.0.2-2 [12.7 kB]
Get:21 http://deb.debian.org/debian sid/main arm64 libcap-ng0 arm64 0.8.5-3+b1 [17.0 kB]
Get:22 http://deb.debian.org/debian sid/main arm64 libaudit1 arm64 1:4.0.2-2 [54.2 kB]
Get:23 http://deb.debian.org/debian sid/main arm64 login arm64 1:4.16.0-2+really2.40.2-11 [80.0 kB]
Get:24 http://deb.debian.org/debian sid/main arm64 login.defs all 1:4.16.0-5 [185 kB]
Get:25 http://deb.debian.org/debian sid/main arm64 libsemanage2 arm64 3.7-2+b1 [84.5 kB]
Get:26 http://deb.debian.org/debian sid/main arm64 passwd arm64 1:4.16.0-5 [1210 kB]
Get:27 http://deb.debian.org/debian sid/main arm64 libbrotli1 arm64 1.1.0-2+b6 [297 kB]
Get:28 http://deb.debian.org/debian sid/main arm64 libglib2.0-0t64 arm64 2.82.2-3 [1411 kB]
Get:29 http://deb.debian.org/debian sid/main arm64 libmarkdown2 arm64 2.2.7-2.1 [33.1 kB]
Get:30 http://deb.debian.org/debian sid/main arm64 libxml2 arm64 2.12.7+dfsg+really2.9.14-0.2+b1 [630 kB]
debconf: delaying package configuration, since apt-utils is not installed
Fetched 9274 kB in 0s (59.4 MB/s)
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 17129 files and directories currently installed.)
Preparing to unpack .../bsdutils_1%3a2.40.2-11_arm64.deb ...
Unpacking bsdutils (1:2.40.2-11) over (1:2.40.2-10) ...
Setting up bsdutils (1:2.40.2-11) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 17129 files and directories currently installed.)
Preparing to unpack .../debianutils_5.21_arm64.deb ...
Unpacking debianutils (5.21) over (5.20+b1) ...
Setting up debianutils (5.21) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 17128 files and directories currently installed.)
Preparing to unpack .../libsystemd0_257~rc2-3_arm64.deb ...
Unpacking libsystemd0:arm64 (257~rc2-3) over (257~rc1-4) ...
Setting up libsystemd0:arm64 (257~rc2-3) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 17128 files and directories currently installed.)
Preparing to unpack .../libudev1_257~rc2-3_arm64.deb ...
Unpacking libudev1:arm64 (257~rc2-3) over (257~rc1-4) ...
Setting up libudev1:arm64 (257~rc2-3) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 17128 files and directories currently installed.)
Preparing to unpack .../libapt-pkg6.0t64_2.9.11_arm64.deb ...
Unpacking libapt-pkg6.0t64:arm64 (2.9.11) over (2.9.10) ...
Setting up libapt-pkg6.0t64:arm64 (2.9.11) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 17128 files and directories currently installed.)
Preparing to unpack .../dpkg_1.22.12~1.gbp82cafd_arm64.deb ...
Unpacking dpkg (1.22.12~1.gbp82cafd) over (1.22.11) ...
Setting up dpkg (1.22.12~1.gbp82cafd) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 17127 files and directories currently installed.)
Preparing to unpack .../bsdextrautils_2.40.2-11_arm64.deb ...
Unpacking bsdextrautils (2.40.2-11) over (2.40.2-10) ...
Preparing to unpack .../libblkid1_2.40.2-11_arm64.deb ...
Unpacking libblkid1:arm64 (2.40.2-11) over (2.40.2-10) ...
Setting up libblkid1:arm64 (2.40.2-11) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 17123 files and directories currently installed.)
Preparing to unpack .../libmount1_2.40.2-11_arm64.deb ...
Unpacking libmount1:arm64 (2.40.2-11) over (2.40.2-10) ...
Setting up libmount1:arm64 (2.40.2-11) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 17123 files and directories currently installed.)
Preparing to unpack .../libsmartcols1_2.40.2-11_arm64.deb ...
Unpacking libsmartcols1:arm64 (2.40.2-11) over (2.40.2-10) ...
Setting up libsmartcols1:arm64 (2.40.2-11) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 17123 files and directories currently installed.)
Preparing to unpack .../mount_2.40.2-11_arm64.deb ...
Unpacking mount (2.40.2-11) over (2.40.2-10) ...
Preparing to unpack .../libuuid1_2.40.2-11_arm64.deb ...
Unpacking libuuid1:arm64 (2.40.2-11) over (2.40.2-10) ...
Setting up libuuid1:arm64 (2.40.2-11) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 17123 files and directories currently installed.)
Preparing to unpack .../util-linux_2.40.2-11_arm64.deb ...
Unpacking util-linux (2.40.2-11) over (2.40.2-10) ...
Setting up util-linux (2.40.2-11) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 17120 files and directories currently installed.)
Preparing to unpack .../libpcre2-8-0_10.44-4_arm64.deb ...
Unpacking libpcre2-8-0:arm64 (10.44-4) over (10.42-4+b2) ...
Setting up libpcre2-8-0:arm64 (10.44-4) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 17119 files and directories currently installed.)
Preparing to unpack .../libselinux1_3.7-3+b1_arm64.deb ...
Unpacking libselinux1:arm64 (3.7-3+b1) over (3.7-3) ...
Setting up libselinux1:arm64 (3.7-3+b1) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 17120 files and directories currently installed.)
Preparing to unpack .../libseccomp2_2.5.5-1+b3_arm64.deb ...
Unpacking libseccomp2:arm64 (2.5.5-1+b3) over (2.5.5-1+b2) ...
Setting up libseccomp2:arm64 (2.5.5-1+b3) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 17120 files and directories currently installed.)
Preparing to unpack .../archives/apt_2.9.11_arm64.deb ...
Unpacking apt (2.9.11) over (2.9.10) ...
Setting up apt (2.9.11) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 17117 files and directories currently installed.)
Preparing to unpack .../libaudit-common_1%3a4.0.2-2_all.deb ...
Unpacking libaudit-common (1:4.0.2-2) over (1:4.0.1-3) ...
Setting up libaudit-common (1:4.0.2-2) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 17117 files and directories currently installed.)
Preparing to unpack .../libcap-ng0_0.8.5-3+b1_arm64.deb ...
Unpacking libcap-ng0:arm64 (0.8.5-3+b1) over (0.8.5-3) ...
Setting up libcap-ng0:arm64 (0.8.5-3+b1) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 17118 files and directories currently installed.)
Preparing to unpack .../libaudit1_1%3a4.0.2-2_arm64.deb ...
Unpacking libaudit1:arm64 (1:4.0.2-2) over (1:4.0.1-3) ...
Setting up libaudit1:arm64 (1:4.0.2-2) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 17118 files and directories currently installed.)
Preparing to unpack .../0-login_1%3a4.16.0-2+really2.40.2-11_arm64.deb ...
Unpacking login (1:4.16.0-2+really2.40.2-11) over (1:4.16.0-2+really2.40.2-10) ...
Preparing to unpack .../1-login.defs_1%3a4.16.0-5_all.deb ...
Unpacking login.defs (1:4.16.0-5) over (1:4.16.0-4) ...
Preparing to unpack .../2-libsemanage2_3.7-2+b1_arm64.deb ...
Unpacking libsemanage2:arm64 (3.7-2+b1) over (3.7-2) ...
Preparing to unpack .../3-passwd_1%3a4.16.0-5_arm64.deb ...
Unpacking passwd (1:4.16.0-5) over (1:4.16.0-4) ...
Preparing to unpack .../4-dpkg-dev_1.22.12~1.gbp82cafd_all.deb ...
Unpacking dpkg-dev (1.22.12~1.gbp82cafd) over (1.22.11) ...
Preparing to unpack .../5-libdpkg-perl_1.22.12~1.gbp82cafd_all.deb ...
Unpacking libdpkg-perl (1.22.12~1.gbp82cafd) over (1.22.11) ...
Preparing to unpack .../6-libbrotli1_1.1.0-2+b6_arm64.deb ...
Unpacking libbrotli1:arm64 (1.1.0-2+b6) over (1.1.0-2+b5) ...
Preparing to unpack .../7-libglib2.0-0t64_2.82.2-3_arm64.deb ...
Unpacking libglib2.0-0t64:arm64 (2.82.2-3) over (2.82.2-2) ...
Preparing to unpack .../8-libmarkdown2_2.2.7-2.1_arm64.deb ...
Unpacking libmarkdown2:arm64 (2.2.7-2.1) over (2.2.7-2+b1) ...
Preparing to unpack .../9-libxml2_2.12.7+dfsg+really2.9.14-0.2+b1_arm64.deb ...
Unpacking libxml2:arm64 (2.12.7+dfsg+really2.9.14-0.2+b1) over (2.12.7+dfsg+really2.9.14-0.1) ...
Setting up bsdextrautils (2.40.2-11) ...
Setting up login.defs (1:4.16.0-5) ...
Installing new version of config file /etc/login.defs ...
Setting up libbrotli1:arm64 (1.1.0-2+b6) ...
Setting up libglib2.0-0t64:arm64 (2.82.2-3) ...
No schema files found: doing nothing.
Setting up libdpkg-perl (1.22.12~1.gbp82cafd) ...
Setting up mount (2.40.2-11) ...
Setting up libsemanage2:arm64 (3.7-2+b1) ...
Setting up libxml2:arm64 (2.12.7+dfsg+really2.9.14-0.2+b1) ...
Setting up libmarkdown2:arm64 (2.2.7-2.1) ...
Setting up login (1:4.16.0-2+really2.40.2-11) ...
Setting up dpkg-dev (1.22.12~1.gbp82cafd) ...
Setting up passwd (1:4.16.0-5) ...
Processing triggers for man-db (2.13.0-1) ...
Processing triggers for libc-bin (2.40-3) ...
+------------------------------------------------------------------------------+
| Fetch source files |
+------------------------------------------------------------------------------+
Local sources
-------------
/tmp/debusine-fetch-exec-upload-mvi7h4wb/maildrop_2.9.3-2.1.dsc exists in /tmp/debusine-fetch-exec-upload-mvi7h4wb; copying to chroot
I: NOTICE: Log filtering will replace 'build/maildrop-ppW5LN/maildrop-2.9.3' with '<<PKGBUILDDIR>>'
I: NOTICE: Log filtering will replace 'build/maildrop-ppW5LN' with '<<BUILDDIR>>'
+------------------------------------------------------------------------------+
| Install package build dependencies |
+------------------------------------------------------------------------------+
Setup apt archive
-----------------
Merged Build-Depends: autoconf, automake, autotools-dev, courier-authlib-dev (>= 0.66.4-5~), libcourier-unicode-dev, debhelper (>= 9), dh-autoreconf, libgdbm-dev, libpcre3-dev, libtool, pkg-config, build-essential, fakeroot
Merged Build-Conflicts: libfam-dev
Filtered Build-Depends: autoconf, automake, autotools-dev, courier-authlib-dev (>= 0.66.4-5~), libcourier-unicode-dev, debhelper (>= 9), dh-autoreconf, libgdbm-dev, libpcre3-dev, libtool, pkg-config, build-essential, fakeroot
Filtered Build-Conflicts: libfam-dev
dpkg-deb: warning: root directory has unusual owner or group 998:999.
Hint: either pass --root-owner-group, see dpkg-build-api(7) or add an explicit 'Rules-Requires-Root: no' in debian/control.
dpkg-deb: warning: ignoring 1 warning about the control file(s)
dpkg-deb: building package 'sbuild-build-depends-main-dummy' in '/<<RESOLVERDIR>>/apt_archive/sbuild-build-depends-main-dummy.deb'.
Ign:1 copy:/<<RESOLVERDIR>>/apt_archive ./ InRelease
Get:2 copy:/<<RESOLVERDIR>>/apt_archive ./ Release [609 B]
Ign:3 copy:/<<RESOLVERDIR>>/apt_archive ./ Release.gpg
Get:4 copy:/<<RESOLVERDIR>>/apt_archive ./ Sources [796 B]
Get:5 copy:/<<RESOLVERDIR>>/apt_archive ./ Packages [822 B]
Fetched 2227 B in 0s (183 kB/s)
Reading package lists...
Get:1 file:/<<BUILDDIR>>/resolver-Anq0aG/apt_archive ./ InRelease
Ign:1 file:/<<BUILDDIR>>/resolver-Anq0aG/apt_archive ./ InRelease
Get:2 file:/<<BUILDDIR>>/resolver-Anq0aG/apt_archive ./ Release [606 B]
Get:2 file:/<<BUILDDIR>>/resolver-Anq0aG/apt_archive ./ Release [606 B]
Get:3 file:/<<BUILDDIR>>/resolver-Anq0aG/apt_archive ./ Release.gpg
Ign:3 file:/<<BUILDDIR>>/resolver-Anq0aG/apt_archive ./ Release.gpg
Reading package lists...
Reading package lists...
Install main build dependencies (apt-based resolver)
----------------------------------------------------
Installing build dependencies
Reading package lists...
Building dependency tree...
Reading state information...
The following additional packages will be installed:
adduser autoconf automake autopoint autotools-dev build-essential
courier-authlib courier-authlib-dev cpp cpp-14 cpp-14-aarch64-linux-gnu
cpp-aarch64-linux-gnu debhelper dh-autoreconf dh-strip-nondeterminism dwz
fakeroot g++ g++-14 g++-14-aarch64-linux-gnu g++-aarch64-linux-gnu gcc
gcc-14 gcc-14-aarch64-linux-gnu gcc-aarch64-linux-gnu libasan8 libc-dev-bin
libc6-dev libcc1-0 libcourier-unicode-dev libcourier-unicode4 libcrypt-dev
libdebhelper-perl libelf1t64 libfakeroot libfile-stripnondeterminism-perl
libgcc-14-dev libgdbm-dev libhwasan0 libisl23 libitm1 liblsan0 libltdl7
libmpc3 libmpfr6 libpcre16-3 libpcre3 libpcre3-dev libpcre32-3 libpcrecpp0v5
libpkgconf3 libstdc++-14-dev libtool libtsan2 libubsan1 linux-libc-dev m4
pkg-config pkgconf pkgconf-bin po-debconf rpcsvc-proto
Suggested packages:
liblocale-gettext-perl cron quota autoconf-archive gnu-standards
autoconf-doc cpp-doc gcc-14-locales cpp-14-doc dh-make gcc-14-doc
gcc-multilib manpages-dev flex bison gdb gcc-doc gdb-aarch64-linux-gnu
libc-devtools glibc-doc libstdc++-14-doc libtool-doc gfortran
| fortran95-compiler gcj-jdk m4-doc libmail-box-perl
Recommended packages:
expect manpages manpages-dev libarchive-cpio-perl libltdl-dev
libmail-sendmail-perl
The following NEW packages will be installed:
adduser autoconf automake autopoint autotools-dev build-essential
courier-authlib courier-authlib-dev cpp cpp-14 cpp-14-aarch64-linux-gnu
cpp-aarch64-linux-gnu debhelper dh-autoreconf dh-strip-nondeterminism dwz
fakeroot g++ g++-14 g++-14-aarch64-linux-gnu g++-aarch64-linux-gnu gcc
gcc-14 gcc-14-aarch64-linux-gnu gcc-aarch64-linux-gnu libasan8 libc-dev-bin
libc6-dev libcc1-0 libcourier-unicode-dev libcourier-unicode4 libcrypt-dev
libdebhelper-perl libelf1t64 libfakeroot libfile-stripnondeterminism-perl
libgcc-14-dev libgdbm-dev libhwasan0 libisl23 libitm1 liblsan0 libltdl7
libmpc3 libmpfr6 libpcre16-3 libpcre3 libpcre3-dev libpcre32-3 libpcrecpp0v5
libpkgconf3 libstdc++-14-dev libtool libtsan2 libubsan1 linux-libc-dev m4
pkg-config pkgconf pkgconf-bin po-debconf rpcsvc-proto
sbuild-build-depends-main-dummy
0 upgraded, 63 newly installed, 0 to remove and 0 not upgraded.
Need to get 63.7 MB of archives.
After this operation, 246 MB of additional disk space will be used.
Get:1 copy:/<<RESOLVERDIR>>/apt_archive ./ sbuild-build-depends-main-dummy 0.invalid.0 [976 B]
Get:2 http://deb.debian.org/debian sid/main arm64 adduser all 3.137 [140 kB]
Get:3 http://deb.debian.org/debian sid/main arm64 m4 arm64 1.4.19-4 [277 kB]
Get:4 http://deb.debian.org/debian sid/main arm64 autoconf all 2.72-3 [493 kB]
Get:5 http://deb.debian.org/debian sid/main arm64 autotools-dev all 20220109.1 [51.6 kB]
Get:6 http://deb.debian.org/debian sid/main arm64 automake all 1:1.16.5-1.3 [823 kB]
Get:7 http://deb.debian.org/debian sid/main arm64 autopoint all 0.22.5-2 [723 kB]
Get:8 http://deb.debian.org/debian sid/main arm64 libc-dev-bin arm64 2.40-3 [50.9 kB]
Get:9 http://deb.debian.org/debian sid/main arm64 linux-libc-dev all 6.11.7-1 [2454 kB]
Get:10 http://deb.debian.org/debian sid/main arm64 libcrypt-dev arm64 1:4.4.36-5 [122 kB]
Get:11 http://deb.debian.org/debian sid/main arm64 rpcsvc-proto arm64 1.4.3-1+b1 [60.5 kB]
Get:12 http://deb.debian.org/debian sid/main arm64 libc6-dev arm64 2.40-3 [1591 kB]
Get:13 http://deb.debian.org/debian sid/main arm64 libisl23 arm64 0.27-1 [601 kB]
Get:14 http://deb.debian.org/debian sid/main arm64 libmpfr6 arm64 4.2.1-1+b2 [680 kB]
Get:15 http://deb.debian.org/debian sid/main arm64 libmpc3 arm64 1.3.1-1+b3 [50.5 kB]
Get:16 http://deb.debian.org/debian sid/main arm64 cpp-14-aarch64-linux-gnu arm64 14.2.0-8 [9166 kB]
Get:17 http://deb.debian.org/debian sid/main arm64 cpp-14 arm64 14.2.0-8 [1284 B]
Get:18 http://deb.debian.org/debian sid/main arm64 cpp-aarch64-linux-gnu arm64 4:14.2.0-1 [4832 B]
Get:19 http://deb.debian.org/debian sid/main arm64 cpp arm64 4:14.2.0-1 [1568 B]
Get:20 http://deb.debian.org/debian sid/main arm64 libcc1-0 arm64 14.2.0-8 [42.2 kB]
Get:21 http://deb.debian.org/debian sid/main arm64 libitm1 arm64 14.2.0-8 [24.2 kB]
Get:22 http://deb.debian.org/debian sid/main arm64 libasan8 arm64 14.2.0-8 [2579 kB]
Get:23 http://deb.debian.org/debian sid/main arm64 liblsan0 arm64 14.2.0-8 [1161 kB]
Get:24 http://deb.debian.org/debian sid/main arm64 libtsan2 arm64 14.2.0-8 [2386 kB]
Get:25 http://deb.debian.org/debian sid/main arm64 libubsan1 arm64 14.2.0-8 [1039 kB]
Get:26 http://deb.debian.org/debian sid/main arm64 libhwasan0 arm64 14.2.0-8 [1442 kB]
Get:27 http://deb.debian.org/debian sid/main arm64 libgcc-14-dev arm64 14.2.0-8 [2365 kB]
Get:28 http://deb.debian.org/debian sid/main arm64 gcc-14-aarch64-linux-gnu arm64 14.2.0-8 [17.7 MB]
Get:29 http://deb.debian.org/debian sid/main arm64 gcc-14 arm64 14.2.0-8 [519 kB]
Get:30 http://deb.debian.org/debian sid/main arm64 gcc-aarch64-linux-gnu arm64 4:14.2.0-1 [1440 B]
Get:31 http://deb.debian.org/debian sid/main arm64 gcc arm64 4:14.2.0-1 [5136 B]
Get:32 http://deb.debian.org/debian sid/main arm64 libstdc++-14-dev arm64 14.2.0-8 [2267 kB]
Get:33 http://deb.debian.org/debian sid/main arm64 g++-14-aarch64-linux-gnu arm64 14.2.0-8 [10.1 MB]
Get:34 http://deb.debian.org/debian sid/main arm64 g++-14 arm64 14.2.0-8 [20.2 kB]
Get:35 http://deb.debian.org/debian sid/main arm64 g++-aarch64-linux-gnu arm64 4:14.2.0-1 [1200 B]
Get:36 http://deb.debian.org/debian sid/main arm64 g++ arm64 4:14.2.0-1 [1332 B]
Get:37 http://deb.debian.org/debian sid/main arm64 build-essential arm64 12.12 [4624 B]
Get:38 http://deb.debian.org/debian sid/main arm64 libltdl7 arm64 2.4.7-8 [392 kB]
Get:39 http://deb.debian.org/debian sid/main arm64 courier-authlib arm64 0.71.4-1+b5 [75.9 kB]
Get:40 http://deb.debian.org/debian sid/main arm64 courier-authlib-dev arm64 0.71.4-1+b5 [165 kB]
Get:41 http://deb.debian.org/debian sid/main arm64 libdebhelper-perl all 13.20 [89.7 kB]
Get:42 http://deb.debian.org/debian sid/main arm64 libtool all 2.4.7-8 [517 kB]
Get:43 http://deb.debian.org/debian sid/main arm64 dh-autoreconf all 20 [17.1 kB]
Get:44 http://deb.debian.org/debian sid/main arm64 libfile-stripnondeterminism-perl all 1.14.0-1 [19.5 kB]
Get:45 http://deb.debian.org/debian sid/main arm64 dh-strip-nondeterminism all 1.14.0-1 [8448 B]
Get:46 http://deb.debian.org/debian sid/main arm64 libelf1t64 arm64 0.192-4 [189 kB]
Get:47 http://deb.debian.org/debian sid/main arm64 dwz arm64 0.15-1+b1 [102 kB]
Get:48 http://deb.debian.org/debian sid/main arm64 po-debconf all 1.0.21+nmu1 [248 kB]
Get:49 http://deb.debian.org/debian sid/main arm64 debhelper all 13.20 [915 kB]
Get:50 http://deb.debian.org/debian sid/main arm64 libfakeroot arm64 1.36-1 [29.1 kB]
Get:51 http://deb.debian.org/debian sid/main arm64 fakeroot arm64 1.36-1 [74.4 kB]
Get:52 http://deb.debian.org/debian sid/main arm64 libcourier-unicode4 arm64 2.1.2-2+b3 [42.5 kB]
Get:53 http://deb.debian.org/debian sid/main arm64 libcourier-unicode-dev arm64 2.1.2-2+b3 [86.9 kB]
Get:54 http://deb.debian.org/debian sid/main arm64 libgdbm-dev arm64 1.24-2 [160 kB]
Get:55 http://deb.debian.org/debian sid/main arm64 libpcre16-3 arm64 2:8.39-15.1 [240 kB]
Get:56 http://deb.debian.org/debian sid/main arm64 libpcre3 arm64 2:8.39-15.1 [319 kB]
Get:57 http://deb.debian.org/debian sid/main arm64 libpcre32-3 arm64 2:8.39-15.1 [231 kB]
Get:58 http://deb.debian.org/debian sid/main arm64 libpcrecpp0v5 arm64 2:8.39-15.1 [143 kB]
Get:59 http://deb.debian.org/debian sid/main arm64 libpcre3-dev arm64 2:8.39-15.1 [601 kB]
Get:60 http://deb.debian.org/debian sid/main arm64 libpkgconf3 arm64 1.8.1-4 [35.3 kB]
Get:61 http://deb.debian.org/debian sid/main arm64 pkgconf-bin arm64 1.8.1-4 [29.6 kB]
Get:62 http://deb.debian.org/debian sid/main arm64 pkgconf arm64 1.8.1-4 [26.1 kB]
Get:63 http://deb.debian.org/debian sid/main arm64 pkg-config arm64 1.8.1-4 [14.0 kB]
debconf: delaying package configuration, since apt-utils is not installed
Fetched 63.7 MB in 1s (99.4 MB/s)
Selecting previously unselected package adduser.
(Reading database ... 17119 files and directories currently installed.)
Preparing to unpack .../archives/adduser_3.137_all.deb ...
Unpacking adduser (3.137) ...
Setting up adduser (3.137) ...
Selecting previously unselected package m4.
(Reading database ... 17190 files and directories currently installed.)
Preparing to unpack .../00-m4_1.4.19-4_arm64.deb ...
Unpacking m4 (1.4.19-4) ...
Selecting previously unselected package autoconf.
Preparing to unpack .../01-autoconf_2.72-3_all.deb ...
Unpacking autoconf (2.72-3) ...
Selecting previously unselected package autotools-dev.
Preparing to unpack .../02-autotools-dev_20220109.1_all.deb ...
Unpacking autotools-dev (20220109.1) ...
Selecting previously unselected package automake.
Preparing to unpack .../03-automake_1%3a1.16.5-1.3_all.deb ...
Unpacking automake (1:1.16.5-1.3) ...
Selecting previously unselected package autopoint.
Preparing to unpack .../04-autopoint_0.22.5-2_all.deb ...
Unpacking autopoint (0.22.5-2) ...
Selecting previously unselected package libc-dev-bin.
Preparing to unpack .../05-libc-dev-bin_2.40-3_arm64.deb ...
Unpacking libc-dev-bin (2.40-3) ...
Selecting previously unselected package linux-libc-dev.
Preparing to unpack .../06-linux-libc-dev_6.11.7-1_all.deb ...
Unpacking linux-libc-dev (6.11.7-1) ...
Selecting previously unselected package libcrypt-dev:arm64.
Preparing to unpack .../07-libcrypt-dev_1%3a4.4.36-5_arm64.deb ...
Unpacking libcrypt-dev:arm64 (1:4.4.36-5) ...
Selecting previously unselected package rpcsvc-proto.
Preparing to unpack .../08-rpcsvc-proto_1.4.3-1+b1_arm64.deb ...
Unpacking rpcsvc-proto (1.4.3-1+b1) ...
Selecting previously unselected package libc6-dev:arm64.
Preparing to unpack .../09-libc6-dev_2.40-3_arm64.deb ...
Unpacking libc6-dev:arm64 (2.40-3) ...
Selecting previously unselected package libisl23:arm64.
Preparing to unpack .../10-libisl23_0.27-1_arm64.deb ...
Unpacking libisl23:arm64 (0.27-1) ...
Selecting previously unselected package libmpfr6:arm64.
Preparing to unpack .../11-libmpfr6_4.2.1-1+b2_arm64.deb ...
Unpacking libmpfr6:arm64 (4.2.1-1+b2) ...
Selecting previously unselected package libmpc3:arm64.
Preparing to unpack .../12-libmpc3_1.3.1-1+b3_arm64.deb ...
Unpacking libmpc3:arm64 (1.3.1-1+b3) ...
Selecting previously unselected package cpp-14-aarch64-linux-gnu.
Preparing to unpack .../13-cpp-14-aarch64-linux-gnu_14.2.0-8_arm64.deb ...
Unpacking cpp-14-aarch64-linux-gnu (14.2.0-8) ...
Selecting previously unselected package cpp-14.
Preparing to unpack .../14-cpp-14_14.2.0-8_arm64.deb ...
Unpacking cpp-14 (14.2.0-8) ...
Selecting previously unselected package cpp-aarch64-linux-gnu.
Preparing to unpack .../15-cpp-aarch64-linux-gnu_4%3a14.2.0-1_arm64.deb ...
Unpacking cpp-aarch64-linux-gnu (4:14.2.0-1) ...
Selecting previously unselected package cpp.
Preparing to unpack .../16-cpp_4%3a14.2.0-1_arm64.deb ...
Unpacking cpp (4:14.2.0-1) ...
Selecting previously unselected package libcc1-0:arm64.
Preparing to unpack .../17-libcc1-0_14.2.0-8_arm64.deb ...
Unpacking libcc1-0:arm64 (14.2.0-8) ...
Selecting previously unselected package libitm1:arm64.
Preparing to unpack .../18-libitm1_14.2.0-8_arm64.deb ...
Unpacking libitm1:arm64 (14.2.0-8) ...
Selecting previously unselected package libasan8:arm64.
Preparing to unpack .../19-libasan8_14.2.0-8_arm64.deb ...
Unpacking libasan8:arm64 (14.2.0-8) ...
Selecting previously unselected package liblsan0:arm64.
Preparing to unpack .../20-liblsan0_14.2.0-8_arm64.deb ...
Unpacking liblsan0:arm64 (14.2.0-8) ...
Selecting previously unselected package libtsan2:arm64.
Preparing to unpack .../21-libtsan2_14.2.0-8_arm64.deb ...
Unpacking libtsan2:arm64 (14.2.0-8) ...
Selecting previously unselected package libubsan1:arm64.
Preparing to unpack .../22-libubsan1_14.2.0-8_arm64.deb ...
Unpacking libubsan1:arm64 (14.2.0-8) ...
Selecting previously unselected package libhwasan0:arm64.
Preparing to unpack .../23-libhwasan0_14.2.0-8_arm64.deb ...
Unpacking libhwasan0:arm64 (14.2.0-8) ...
Selecting previously unselected package libgcc-14-dev:arm64.
Preparing to unpack .../24-libgcc-14-dev_14.2.0-8_arm64.deb ...
Unpacking libgcc-14-dev:arm64 (14.2.0-8) ...
Selecting previously unselected package gcc-14-aarch64-linux-gnu.
Preparing to unpack .../25-gcc-14-aarch64-linux-gnu_14.2.0-8_arm64.deb ...
Unpacking gcc-14-aarch64-linux-gnu (14.2.0-8) ...
Selecting previously unselected package gcc-14.
Preparing to unpack .../26-gcc-14_14.2.0-8_arm64.deb ...
Unpacking gcc-14 (14.2.0-8) ...
Selecting previously unselected package gcc-aarch64-linux-gnu.
Preparing to unpack .../27-gcc-aarch64-linux-gnu_4%3a14.2.0-1_arm64.deb ...
Unpacking gcc-aarch64-linux-gnu (4:14.2.0-1) ...
Selecting previously unselected package gcc.
Preparing to unpack .../28-gcc_4%3a14.2.0-1_arm64.deb ...
Unpacking gcc (4:14.2.0-1) ...
Selecting previously unselected package libstdc++-14-dev:arm64.
Preparing to unpack .../29-libstdc++-14-dev_14.2.0-8_arm64.deb ...
Unpacking libstdc++-14-dev:arm64 (14.2.0-8) ...
Selecting previously unselected package g++-14-aarch64-linux-gnu.
Preparing to unpack .../30-g++-14-aarch64-linux-gnu_14.2.0-8_arm64.deb ...
Unpacking g++-14-aarch64-linux-gnu (14.2.0-8) ...
Selecting previously unselected package g++-14.
Preparing to unpack .../31-g++-14_14.2.0-8_arm64.deb ...
Unpacking g++-14 (14.2.0-8) ...
Selecting previously unselected package g++-aarch64-linux-gnu.
Preparing to unpack .../32-g++-aarch64-linux-gnu_4%3a14.2.0-1_arm64.deb ...
Unpacking g++-aarch64-linux-gnu (4:14.2.0-1) ...
Selecting previously unselected package g++.
Preparing to unpack .../33-g++_4%3a14.2.0-1_arm64.deb ...
Unpacking g++ (4:14.2.0-1) ...
Selecting previously unselected package build-essential.
Preparing to unpack .../34-build-essential_12.12_arm64.deb ...
Unpacking build-essential (12.12) ...
Selecting previously unselected package libltdl7:arm64.
Preparing to unpack .../35-libltdl7_2.4.7-8_arm64.deb ...
Unpacking libltdl7:arm64 (2.4.7-8) ...
Selecting previously unselected package courier-authlib.
Preparing to unpack .../36-courier-authlib_0.71.4-1+b5_arm64.deb ...
Unpacking courier-authlib (0.71.4-1+b5) ...
Selecting previously unselected package courier-authlib-dev.
Preparing to unpack .../37-courier-authlib-dev_0.71.4-1+b5_arm64.deb ...
Unpacking courier-authlib-dev (0.71.4-1+b5) ...
Selecting previously unselected package libdebhelper-perl.
Preparing to unpack .../38-libdebhelper-perl_13.20_all.deb ...
Unpacking libdebhelper-perl (13.20) ...
Selecting previously unselected package libtool.
Preparing to unpack .../39-libtool_2.4.7-8_all.deb ...
Unpacking libtool (2.4.7-8) ...
Selecting previously unselected package dh-autoreconf.
Preparing to unpack .../40-dh-autoreconf_20_all.deb ...
Unpacking dh-autoreconf (20) ...
Selecting previously unselected package libfile-stripnondeterminism-perl.
Preparing to unpack .../41-libfile-stripnondeterminism-perl_1.14.0-1_all.deb ...
Unpacking libfile-stripnondeterminism-perl (1.14.0-1) ...
Selecting previously unselected package dh-strip-nondeterminism.
Preparing to unpack .../42-dh-strip-nondeterminism_1.14.0-1_all.deb ...
Unpacking dh-strip-nondeterminism (1.14.0-1) ...
Selecting previously unselected package libelf1t64:arm64.
Preparing to unpack .../43-libelf1t64_0.192-4_arm64.deb ...
Unpacking libelf1t64:arm64 (0.192-4) ...
Selecting previously unselected package dwz.
Preparing to unpack .../44-dwz_0.15-1+b1_arm64.deb ...
Unpacking dwz (0.15-1+b1) ...
Selecting previously unselected package po-debconf.
Preparing to unpack .../45-po-debconf_1.0.21+nmu1_all.deb ...
Unpacking po-debconf (1.0.21+nmu1) ...
Selecting previously unselected package debhelper.
Preparing to unpack .../46-debhelper_13.20_all.deb ...
Unpacking debhelper (13.20) ...
Selecting previously unselected package libfakeroot:arm64.
Preparing to unpack .../47-libfakeroot_1.36-1_arm64.deb ...
Unpacking libfakeroot:arm64 (1.36-1) ...
Selecting previously unselected package fakeroot.
Preparing to unpack .../48-fakeroot_1.36-1_arm64.deb ...
Unpacking fakeroot (1.36-1) ...
Selecting previously unselected package libcourier-unicode4:arm64.
Preparing to unpack .../49-libcourier-unicode4_2.1.2-2+b3_arm64.deb ...
Unpacking libcourier-unicode4:arm64 (2.1.2-2+b3) ...
Selecting previously unselected package libcourier-unicode-dev:arm64.
Preparing to unpack .../50-libcourier-unicode-dev_2.1.2-2+b3_arm64.deb ...
Unpacking libcourier-unicode-dev:arm64 (2.1.2-2+b3) ...
Selecting previously unselected package libgdbm-dev:arm64.
Preparing to unpack .../51-libgdbm-dev_1.24-2_arm64.deb ...
Unpacking libgdbm-dev:arm64 (1.24-2) ...
Selecting previously unselected package libpcre16-3:arm64.
Preparing to unpack .../52-libpcre16-3_2%3a8.39-15.1_arm64.deb ...
Unpacking libpcre16-3:arm64 (2:8.39-15.1) ...
Selecting previously unselected package libpcre3:arm64.
Preparing to unpack .../53-libpcre3_2%3a8.39-15.1_arm64.deb ...
Unpacking libpcre3:arm64 (2:8.39-15.1) ...
Selecting previously unselected package libpcre32-3:arm64.
Preparing to unpack .../54-libpcre32-3_2%3a8.39-15.1_arm64.deb ...
Unpacking libpcre32-3:arm64 (2:8.39-15.1) ...
Selecting previously unselected package libpcrecpp0v5:arm64.
Preparing to unpack .../55-libpcrecpp0v5_2%3a8.39-15.1_arm64.deb ...
Unpacking libpcrecpp0v5:arm64 (2:8.39-15.1) ...
Selecting previously unselected package libpcre3-dev:arm64.
Preparing to unpack .../56-libpcre3-dev_2%3a8.39-15.1_arm64.deb ...
Unpacking libpcre3-dev:arm64 (2:8.39-15.1) ...
Selecting previously unselected package libpkgconf3:arm64.
Preparing to unpack .../57-libpkgconf3_1.8.1-4_arm64.deb ...
Unpacking libpkgconf3:arm64 (1.8.1-4) ...
Selecting previously unselected package pkgconf-bin.
Preparing to unpack .../58-pkgconf-bin_1.8.1-4_arm64.deb ...
Unpacking pkgconf-bin (1.8.1-4) ...
Selecting previously unselected package pkgconf:arm64.
Preparing to unpack .../59-pkgconf_1.8.1-4_arm64.deb ...
Unpacking pkgconf:arm64 (1.8.1-4) ...
Selecting previously unselected package pkg-config:arm64.
Preparing to unpack .../60-pkg-config_1.8.1-4_arm64.deb ...
Unpacking pkg-config:arm64 (1.8.1-4) ...
Selecting previously unselected package sbuild-build-depends-main-dummy.
Preparing to unpack .../61-sbuild-build-depends-main-dummy_0.invalid.0_arm64.deb ...
Unpacking sbuild-build-depends-main-dummy (0.invalid.0) ...
Setting up libfile-stripnondeterminism-perl (1.14.0-1) ...
Setting up libpcre16-3:arm64 (2:8.39-15.1) ...
Setting up po-debconf (1.0.21+nmu1) ...
Setting up libdebhelper-perl (13.20) ...
Setting up linux-libc-dev (6.11.7-1) ...
Setting up m4 (1.4.19-4) ...
Setting up libcourier-unicode4:arm64 (2.1.2-2+b3) ...
Setting up libcourier-unicode-dev:arm64 (2.1.2-2+b3) ...
Setting up libfakeroot:arm64 (1.36-1) ...
Setting up libelf1t64:arm64 (0.192-4) ...
Setting up fakeroot (1.36-1) ...
update-alternatives: using /usr/bin/fakeroot-sysv to provide /usr/bin/fakeroot (fakeroot) in auto mode
Setting up libpcre3:arm64 (2:8.39-15.1) ...
Setting up autotools-dev (20220109.1) ...
Setting up libpkgconf3:arm64 (1.8.1-4) ...
Setting up rpcsvc-proto (1.4.3-1+b1) ...
Setting up libmpfr6:arm64 (4.2.1-1+b2) ...
Setting up libpcre32-3:arm64 (2:8.39-15.1) ...
Setting up libmpc3:arm64 (1.3.1-1+b3) ...
Setting up autopoint (0.22.5-2) ...
Setting up pkgconf-bin (1.8.1-4) ...
Setting up libltdl7:arm64 (2.4.7-8) ...
Setting up autoconf (2.72-3) ...
Setting up libubsan1:arm64 (14.2.0-8) ...
Setting up dh-strip-nondeterminism (1.14.0-1) ...
Setting up dwz (0.15-1+b1) ...
Setting up libhwasan0:arm64 (14.2.0-8) ...
Setting up libcrypt-dev:arm64 (1:4.4.36-5) ...
Setting up libasan8:arm64 (14.2.0-8) ...
Setting up libtsan2:arm64 (14.2.0-8) ...
Setting up libisl23:arm64 (0.27-1) ...
Setting up libc-dev-bin (2.40-3) ...
Setting up libcc1-0:arm64 (14.2.0-8) ...
Setting up liblsan0:arm64 (14.2.0-8) ...
Setting up libitm1:arm64 (14.2.0-8) ...
Setting up automake (1:1.16.5-1.3) ...
update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode
Setting up libpcrecpp0v5:arm64 (2:8.39-15.1) ...
Setting up courier-authlib (0.71.4-1+b5) ...
Setting up pkgconf:arm64 (1.8.1-4) ...
Setting up pkg-config:arm64 (1.8.1-4) ...
Setting up cpp-14-aarch64-linux-gnu (14.2.0-8) ...
Setting up libc6-dev:arm64 (2.40-3) ...
Setting up libgdbm-dev:arm64 (1.24-2) ...
Setting up libgcc-14-dev:arm64 (14.2.0-8) ...
Setting up libstdc++-14-dev:arm64 (14.2.0-8) ...
Setting up courier-authlib-dev (0.71.4-1+b5) ...
Setting up libpcre3-dev:arm64 (2:8.39-15.1) ...
Setting up cpp-aarch64-linux-gnu (4:14.2.0-1) ...
Setting up cpp-14 (14.2.0-8) ...
Setting up cpp (4:14.2.0-1) ...
Setting up gcc-14-aarch64-linux-gnu (14.2.0-8) ...
Setting up gcc-aarch64-linux-gnu (4:14.2.0-1) ...
Setting up g++-14-aarch64-linux-gnu (14.2.0-8) ...
Setting up gcc-14 (14.2.0-8) ...
Setting up g++-aarch64-linux-gnu (4:14.2.0-1) ...
Setting up g++-14 (14.2.0-8) ...
Setting up libtool (2.4.7-8) ...
Setting up gcc (4:14.2.0-1) ...
Setting up dh-autoreconf (20) ...
Setting up g++ (4:14.2.0-1) ...
update-alternatives: using /usr/bin/g++ to provide /usr/bin/c++ (c++) in auto mode
Setting up build-essential (12.12) ...
Setting up debhelper (13.20) ...
Setting up sbuild-build-depends-main-dummy (0.invalid.0) ...
Processing triggers for man-db (2.13.0-1) ...
Processing triggers for libc-bin (2.40-3) ...
+------------------------------------------------------------------------------+
| Check architectures |
+------------------------------------------------------------------------------+
Arch check ok (arm64 included in any)
+------------------------------------------------------------------------------+
| Build environment |
+------------------------------------------------------------------------------+
Kernel: Linux 6.1.0-27-cloud-arm64 #1 SMP Debian 6.1.115-1 (2024-11-01) arm64 (aarch64)
Toolchain package versions: binutils_2.43.1-5 dpkg-dev_1.22.12~1.gbp82cafd g++-14_14.2.0-8 gcc-14_14.2.0-8 libc6-dev_2.40-3 libstdc++-14-dev_14.2.0-8 libstdc++6_14.2.0-8 linux-libc-dev_6.11.7-1
Package versions: adduser_3.137 appstream_1.0.3-1+b1 apt_2.9.11 autoconf_2.72-3 automake_1:1.16.5-1.3 autopoint_0.22.5-2 autotools-dev_20220109.1 base-files_13.5 base-passwd_3.6.5 bash_5.2.32-1+b2 binutils_2.43.1-5 binutils-aarch64-linux-gnu_2.43.1-5 binutils-common_2.43.1-5 bsdextrautils_2.40.2-11 bsdutils_1:2.40.2-11 build-essential_12.12 bzip2_1.0.8-6 ca-certificates_20240203 coreutils_9.5-1+b1 courier-authlib_0.71.4-1+b5 courier-authlib-dev_0.71.4-1+b5 cpp_4:14.2.0-1 cpp-14_14.2.0-8 cpp-14-aarch64-linux-gnu_14.2.0-8 cpp-aarch64-linux-gnu_4:14.2.0-1 dash_0.5.12-9+b1 debconf_1.5.87 debhelper_13.20 debian-archive-keyring_2023.4 debianutils_5.21 dh-autoreconf_20 dh-strip-nondeterminism_1.14.0-1 diffstat_1.66-1+b1 diffutils_1:3.10-1+b1 dpkg_1.22.12~1.gbp82cafd dpkg-dev_1.22.12~1.gbp82cafd dwz_0.15-1+b1 e2fsprogs_1.47.1-1+b1 fakeroot_1.36-1 file_1:5.45-3+b1 findutils_4.10.0-3 g++_4:14.2.0-1 g++-14_14.2.0-8 g++-14-aarch64-linux-gnu_14.2.0-8 g++-aarch64-linux-gnu_4:14.2.0-1 gcc_4:14.2.0-1 gcc-14_14.2.0-8 gcc-14-aarch64-linux-gnu_14.2.0-8 gcc-14-base_14.2.0-8 gcc-aarch64-linux-gnu_4:14.2.0-1 gettext_0.22.5-2 gettext-base_0.22.5-2 gpg_2.2.45-2 gpgconf_2.2.45-2 gpgv_2.2.45-2 grep_3.11-4+b1 groff-base_1.23.0-5 gzip_1.12-1.1+b1 hostname_3.25 init-system-helpers_1.67 intltool-debian_0.35.0+20060710.6 iso-codes_4.17.0-1 libacl1_2.3.2-2+b1 libaliased-perl_0.34-3 libappstream5_1.0.3-1+b1 libapt-pkg-perl_0.1.40+b6 libapt-pkg6.0t64_2.9.11 libarchive-zip-perl_1.68-1 libasan8_14.2.0-8 libassuan9_3.0.1-2 libatomic1_14.2.0-8 libattr1_1:2.5.2-2 libaudit-common_1:4.0.2-2 libaudit1_1:4.0.2-2 libb-hooks-endofscope-perl_0.28-1 libb-hooks-op-check-perl_0.22-3+b2 libberkeleydb-perl_0.66-1 libbinutils_2.43.1-5 libblkid1_2.40.2-11 libbrotli1_1.1.0-2+b6 libbsd0_0.12.2-2 libbz2-1.0_1.0.8-6 libc-bin_2.40-3 libc-dev-bin_2.40-3 libc6_2.40-3 libc6-dev_2.40-3 libcap-ng0_0.8.5-3+b1 libcap2_1:2.66-5+b1 libcapture-tiny-perl_0.48-2 libcc1-0_14.2.0-8 libcgi-pm-perl_4.66-1 libclass-data-inheritable-perl_0.10-1 libclass-inspector-perl_1.36-3 libclass-method-modifiers-perl_2.15-1 libclass-xsaccessor-perl_1.19-4+b4 libclone-perl_0.47-1+b1 libcom-err2_1.47.1-1+b1 libconfig-tiny-perl_2.30-1 libconst-fast-perl_0.014-2 libcourier-unicode-dev_2.1.2-2+b3 libcourier-unicode4_2.1.2-2+b3 libcpanel-json-xs-perl_4.38-1+b1 libcrypt-dev_1:4.4.36-5 libcrypt1_1:4.4.36-5 libctf-nobfd0_2.43.1-5 libctf0_2.43.1-5 libcurl3t64-gnutls_8.11.0-1 libdata-dpath-perl_0.60-1 libdata-messagepack-perl_1.02-1+b4 libdata-optlist-perl_0.114-1 libdata-validate-domain-perl_0.15-1 libdata-validate-ip-perl_0.31-1 libdata-validate-uri-perl_0.07-3 libdb5.3t64_5.3.28+dfsg2-9 libdebconfclient0_0.273 libdebhelper-perl_13.20 libdevel-callchecker-perl_0.009-1+b1 libdevel-size-perl_0.84-1+b1 libdevel-stacktrace-perl_2.0500-1 libdpkg-perl_1.22.12~1.gbp82cafd libdynaloader-functions-perl_0.004-1 libelf1t64_0.192-4 libemail-address-xs-perl_1.05-1+b4 libencode-locale-perl_1.05-3 libexception-class-perl_1.45-1 libext2fs2t64_1.47.1-1+b1 libfakeroot_1.36-1 libffi8_3.4.6-1 libfile-basedir-perl_0.09-2 libfile-find-rule-perl_0.34-3 libfile-listing-perl_6.16-1 libfile-sharedir-perl_1.118-3 libfile-stripnondeterminism-perl_1.14.0-1 libfont-ttf-perl_1.06-2 libgcc-14-dev_14.2.0-8 libgcc-s1_14.2.0-8 libgcrypt20_1.11.0-6 libgdbm-compat4t64_1.24-2 libgdbm-dev_1.24-2 libgdbm6t64_1.24-2 libglib2.0-0t64_2.82.2-3 libgmp10_2:6.3.0+dfsg-2+b2 libgnutls30t64_3.8.8-2 libgomp1_14.2.0-8 libgpg-error0_1.50-4 libgprofng0_2.43.1-5 libgssapi-krb5-2_1.21.3-3 libhogweed6t64_3.10-1+b1 libhtml-form-perl_6.12-1 libhtml-html5-entities-perl_0.004-3 libhtml-parser-perl_3.83-1+b1 libhtml-tagset-perl_3.24-1 libhtml-tokeparser-simple-perl_3.16-4 libhtml-tree-perl_5.07-3 libhttp-cookies-perl_6.11-1 libhttp-date-perl_6.06-1 libhttp-message-perl_7.00-2 libhttp-negotiate-perl_6.01-2 libhwasan0_14.2.0-8 libicu72_72.1-5+b1 libidn2-0_2.3.7-2+b1 libimport-into-perl_1.002005-2 libio-html-perl_1.004-3 libio-interactive-perl_1.025-1 libio-socket-ssl-perl_2.089-1 libio-string-perl_1.08-4 libipc-run3-perl_0.049-1 libipc-system-simple-perl_1.30-2 libisl23_0.27-1 libiterator-perl_0.03+ds1-2 libiterator-util-perl_0.02+ds1-2 libitm1_14.2.0-8 libjansson4_2.14-2+b3 libjson-maybexs-perl_1.004008-1 libk5crypto3_1.21.3-3 libkeyutils1_1.6.3-4 libkrb5-3_1.21.3-3 libkrb5support0_1.21.3-3 libldap-2.5-0_2.5.18+dfsg-3+b1 liblist-compare-perl_0.55-2 liblist-someutils-perl_0.59-1 liblist-utilsby-perl_0.12-2 liblsan0_14.2.0-8 libltdl7_2.4.7-8 liblwp-mediatypes-perl_6.04-2 liblwp-protocol-https-perl_6.14-1 liblz1_1.15~pre2-1 liblz4-1_1.9.4-3+b1 liblzma5_5.6.3-1+b1 liblzo2-2_2.10-3+b1 libmagic-mgc_1:5.45-3+b1 libmagic1t64_1:5.45-3+b1 libmarkdown2_2.2.7-2.1 libmd0_1.1.0-2+b1 libmldbm-perl_2.05-4 libmodule-implementation-perl_0.09-2 libmodule-runtime-perl_0.016-2 libmoo-perl_2.005005-1 libmoox-aliases-perl_0.001006-2 libmount1_2.40.2-11 libmouse-perl_2.5.11-1+b1 libmpc3_1.3.1-1+b3 libmpfr6_4.2.1-1+b2 libnamespace-clean-perl_0.27-2 libnet-domain-tld-perl_1.75-4 libnet-http-perl_6.23-1 libnet-ipv6addr-perl_1.02-1 libnet-netmask-perl_2.0002-2 libnet-ssleay-perl_1.94-2 libnetaddr-ip-perl_4.079+dfsg-2+b4 libnettle8t64_3.10-1+b1 libnghttp2-14_1.64.0-1 libnghttp3-9_1.4.0-1+b1 libngtcp2-16_1.6.0-1 libngtcp2-crypto-gnutls8_1.6.0-1 libnumber-compare-perl_0.03-3 libp11-kit0_0.25.5-2+b1 libpackage-stash-perl_0.40-1 libpam-modules_1.5.3-7+b1 libpam-modules-bin_1.5.3-7+b1 libpam-runtime_1.5.3-7 libpam0g_1.5.3-7+b1 libparams-classify-perl_0.015-2+b4 libparams-util-perl_1.102-3+b1 libpath-tiny-perl_0.146-1 libpcre16-3_2:8.39-15.1 libpcre2-8-0_10.44-4 libpcre3_2:8.39-15.1 libpcre3-dev_2:8.39-15.1 libpcre32-3_2:8.39-15.1 libpcrecpp0v5_2:8.39-15.1 libperl5.40_5.40.0-7 libperlio-gzip-perl_0.20-1+b4 libperlio-utf8-strict-perl_0.010-1+b3 libpipeline1_1.5.8-1 libpkgconf3_1.8.1-4 libproc-processtable-perl_0.636-1+b3 libpsl5t64_0.21.2-1.1+b1 libreadline8t64_8.2-5 libregexp-wildcards-perl_1.05-3 librole-tiny-perl_2.002004-1 librtmp1_2.4+20151223.gitfa8646d.1-2+b5 libsasl2-2_2.1.28+dfsg1-8 libsasl2-modules-db_2.1.28+dfsg1-8 libseccomp2_2.5.5-1+b3 libselinux1_3.7-3+b1 libsemanage-common_3.7-2 libsemanage2_3.7-2+b1 libsepol2_3.7-1 libsereal-decoder-perl_5.004+ds-1+b3 libsereal-encoder-perl_5.004+ds-1+b3 libsframe1_2.43.1-5 libsmartcols1_2.40.2-11 libsort-versions-perl_1.62-3 libsqlite3-0_3.46.1-1 libss2_1.47.1-1+b1 libssh2-1t64_1.11.1-1 libssl3t64_3.3.2-2 libstdc++-14-dev_14.2.0-8 libstdc++6_14.2.0-8 libstemmer0d_2.2.0-4+b2 libstrictures-perl_2.000006-1 libsub-exporter-perl_0.990-1 libsub-exporter-progressive-perl_0.001013-3 libsub-identify-perl_0.14-3+b3 libsub-install-perl_0.929-1 libsub-name-perl_0.27-1+b3 libsub-quote-perl_2.006008-1 libsyntax-keyword-try-perl_0.30-1+b1 libsystemd0_257~rc2-3 libtasn1-6_4.19.0-3+b3 libterm-readkey-perl_2.38-2+b4 libtext-glob-perl_0.11-3 libtext-levenshteinxs-perl_0.03-5+b4 libtext-markdown-discount-perl_0.16-1+b3 libtext-xslate-perl_3.5.9-2+b1 libtime-duration-perl_1.21-2 libtime-moment-perl_0.44-2+b4 libtimedate-perl_2.3300-2 libtinfo6_6.5-2+b1 libtool_2.4.7-8 libtry-tiny-perl_0.32-1 libtsan2_14.2.0-8 libubsan1_14.2.0-8 libuchardet0_0.0.8-1+b2 libudev1_257~rc2-3 libunicode-utf8-perl_0.62-2+b3 libunistring5_1.2-1+b1 liburi-perl_5.30-1 libuuid1_2.40.2-11 libvariable-magic-perl_0.64-1+b1 libwww-mechanize-perl_2.19-1 libwww-perl_6.77-1 libwww-robotrules-perl_6.02-1 libxml-libxml-perl_2.0207+dfsg+really+2.0134-5+b1 libxml-namespacesupport-perl_1.12-2 libxml-sax-base-perl_1.09-3 libxml-sax-perl_1.02+dfsg-3 libxml2_2.12.7+dfsg+really2.9.14-0.2+b1 libxmlb2_0.3.21-1 libxs-parse-keyword-perl_0.46-1+b1 libxxhash0_0.8.2-2+b2 libyaml-0-2_0.2.5-1+b2 libyaml-libyaml-perl_0.902.0+ds-2+b1 libzstd1_1.5.6+dfsg-1+b1 lintian_2.120.0 linux-libc-dev_6.11.7-1 login_1:4.16.0-2+really2.40.2-11 login.defs_1:4.16.0-5 logsave_1.47.1-1+b1 lzop_1.04-2+b1 m4_1.4.19-4 make_4.3-4.1+b1 man-db_2.13.0-1 mawk_1.3.4.20240905-1 mount_2.40.2-11 ncurses-base_6.5-2 ncurses-bin_6.5-2+b1 netbase_6.4 openssl_3.3.2-2 openssl-provider-legacy_3.3.2-2 passwd_1:4.16.0-5 patch_2.7.6-7+b1 patchutils_0.4.2-1+b1 perl_5.40.0-7 perl-base_5.40.0-7 perl-modules-5.40_5.40.0-7 perl-openssl-defaults_7+b2 pkg-config_1.8.1-4 pkgconf_1.8.1-4 pkgconf-bin_1.8.1-4 plzip_1.11-2 po-debconf_1.0.21+nmu1 readline-common_8.2-5 rpcsvc-proto_1.4.3-1+b1 sbuild-build-depends-main-dummy_0.invalid.0 sed_4.9-2+b1 sensible-utils_0.0.24 shared-mime-info_2.4-5+b1 sysvinit-utils_3.11-1 t1utils_1.41-4+b1 tar_1.35+dfsg-3+b1 tzdata_2024b-3 ucf_3.0043+nmu1 unzip_6.0-28+b1 util-linux_2.40.2-11 xz-utils_5.6.3-1+b1 zlib1g_1:1.3.dfsg+really1.3.1-1+b1
+------------------------------------------------------------------------------+
| Build |
+------------------------------------------------------------------------------+
Unpack source
-------------
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA512
Format: 3.0 (quilt)
Source: maildrop
Binary: maildrop
Architecture: any
Version: 2.9.3-2.1
Maintainer: Josip Rodin <joy-packages@debian.org>
Uploaders: Osamu Aoki <osamu@debian.org>
Homepage: http://www.courier-mta.org/maildrop/
Standards-Version: 3.9.5
Vcs-Browser: https://salsa.debian.org/debian/maildrop
Vcs-Git: https://salsa.debian.org/debian/maildrop
Build-Depends: autoconf, automake, autotools-dev, courier-authlib-dev (>= 0.66.4-5~), libcourier-unicode-dev, debhelper (>= 9), dh-autoreconf, libgdbm-dev, libpcre3-dev, libtool, pkg-config
Build-Conflicts: libfam-dev
Package-List:
maildrop deb mail optional arch=any
Checksums-Sha1:
b7bff39ceb71cfaeb95a463d317d95768ddff265 2079784 maildrop_2.9.3.orig.tar.bz2
5f271cb661ed43c4009e312e1ed74ce46d9ae433 21072 maildrop_2.9.3-2.1.debian.tar.xz
Checksums-Sha256:
fceae3b85dd9caf4d769d76e5d1179c4065b7f3af88623008ad44f9e08299794 2079784 maildrop_2.9.3.orig.tar.bz2
bc6e4284a4c141f8bbd0d20522357f997558990cca2cdff6874fdb1f53c2fcb3 21072 maildrop_2.9.3-2.1.debian.tar.xz
Files:
fe1dab15f7339516b6d93878fdf42a40 2079784 maildrop_2.9.3.orig.tar.bz2
cec8e0c82e631730bea2c0beb0371713 21072 maildrop_2.9.3-2.1.debian.tar.xz
-----BEGIN PGP SIGNATURE-----
iIgEARYKADAWIQR3hZU8YXPYylUJRxfDof4h+X+qzwUCYtQLJhIcYW5zZ2FyQGRl
Ymlhbi5vcmcACgkQw6H+Ifl/qs/KDwEAwXBK93jRow/024kHy2dFgn2k5/pWC5oX
wXLGbjclstsA/RH60rxWoq4D4eCJ1Z2Uwuor5lNKg9oTGHNgCvBLLFcJ
=mrg0
-----END PGP SIGNATURE-----
gpgv: Signature made Sun Jul 17 13:14:14 2022 UTC
gpgv: using EDDSA key 7785953C6173D8CA55094717C3A1FE21F97FAACF
gpgv: issuer "ansgar@debian.org"
gpgv: Can't check signature: No public key
dpkg-source: warning: cannot verify inline signature for ./maildrop_2.9.3-2.1.dsc: no acceptable signature found
dpkg-source: info: extracting maildrop in /<<PKGBUILDDIR>>
dpkg-source: info: unpacking maildrop_2.9.3.orig.tar.bz2
dpkg-source: info: unpacking maildrop_2.9.3-2.1.debian.tar.xz
dpkg-source: info: using patch list from debian/patches/series
dpkg-source: info: applying 0001-sendmail-path.patch
dpkg-source: info: applying 0002-filter-permissions.patch
dpkg-source: info: applying 0003-permanent-err.patch
dpkg-source: info: applying 0004-deliver-extra-newlines.patch
dpkg-source: info: applying 0006-postfix-docs.patch
dpkg-source: info: applying 0007-reproduceble-sh.patch
Check disk space
----------------
Sufficient free space for build
User Environment
----------------
APT_CONFIG=/var/lib/sbuild/apt.conf
HOME=/sbuild-nonexistent
LANG=en_US.UTF-8
LC_ALL=C.UTF-8
LOGNAME=debusine-worker
PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games
SHELL=/bin/sh
USER=debusine-worker
dpkg-buildpackage
-----------------
Command: dpkg-buildpackage -us -uc -b -rfakeroot
dpkg-buildpackage: info: source package maildrop
dpkg-buildpackage: info: source version 2.9.3-2.1
dpkg-buildpackage: info: source distribution unstable
dpkg-buildpackage: info: source changed by Ansgar <ansgar@debian.org>
dpkg-source --before-build .
dpkg-buildpackage: info: host architecture arm64
dpkg-source: info: using options from maildrop-2.9.3/debian/source/options: --extend-diff-ignore=(^|/)(config\.sub|config\.guess|ltmain.sh|depcomp|install-sh|missing|Makefile.in|aclocal.m4|configure)$
debian/rules clean
dh clean --with autotools-dev --with autoreconf
dh: warning: Compatibility levels before 10 are deprecated (level 9 in use)
dh: warning: The autotools-dev sequence is deprecated and replaced by dh in debhelper (>= 9.20160115)
dh: warning: This feature will be removed in compat 12.
dh_autotools-dev_restoreconfig
dh_autotools-dev_restoreconfig: warning: Compatibility levels before 10 are deprecated (level 9 in use)
dh_autotools-dev_restoreconfig: warning: dh_autotools-dev_restoreconfig is deprecated; please see dh_autotools-dev_restoreconfig(1) for a replacement
dh_autotools-dev_restoreconfig: warning: This feature will be removed in compat 12.
dh_clean
dh_clean: warning: Compatibility levels before 10 are deprecated (level 9 in use)
debian/rules binary
dh binary --with autotools-dev --with autoreconf
dh: warning: Compatibility levels before 10 are deprecated (level 9 in use)
dh: warning: The autotools-dev sequence is deprecated and replaced by dh in debhelper (>= 9.20160115)
dh: warning: This feature will be removed in compat 12.
dh_update_autotools_config
debian/rules override_dh_autoreconf
make[1]: Entering directory '/<<PKGBUILDDIR>>'
find /<<PKGBUILDDIR>> -name Makefile.in -delete
dh_autoreconf --as-needed
libtoolize: putting auxiliary files in AC_CONFIG_AUX_DIR, '../..'.
libtoolize: copying file '../../ltmain.sh'
libtoolize: Consider adding 'AC_CONFIG_MACRO_DIRS([m4])' to configure.ac,
libtoolize: and rerunning libtoolize and aclocal.
libtoolize: Consider adding '-I m4' to ACLOCAL_AMFLAGS in Makefile.am.
configure.ac:21: warning: The macro 'AC_PROG_LIBTOOL' is obsolete.
configure.ac:21: You should run autoupdate.
aclocal.m4:122: AC_PROG_LIBTOOL is expanded from...
configure.ac:21: the top level
configure.ac:49: warning: AC_OUTPUT should be used without arguments.
configure.ac:49: You should run autoupdate.
configure.ac:18: installing '../../compile'
configure.ac:14: installing '../../missing'
Makefile.am: installing '../../depcomp'
libtoolize: putting auxiliary files in AC_CONFIG_AUX_DIR, '../..'.
libtoolize: copying file '../../ltmain.sh'
libtoolize: Consider adding 'AC_CONFIG_MACRO_DIRS([m4])' to configure.ac,
libtoolize: and rerunning libtoolize and aclocal.
libtoolize: Consider adding '-I m4' to ACLOCAL_AMFLAGS in Makefile.am.
configure.ac:22: warning: The macro 'AC_PROG_LIBTOOL' is obsolete.
configure.ac:22: You should run autoupdate.
aclocal.m4:122: AC_PROG_LIBTOOL is expanded from...
configure.ac:22: the top level
configure.ac:28: warning: The macro 'AC_HEADER_STDC' is obsolete.
configure.ac:28: You should run autoupdate.
./lib/autoconf/headers.m4:663: AC_HEADER_STDC is expanded from...
configure.ac:28: the top level
configure.ac:36: warning: The macro 'AC_TYPE_SIGNAL' is obsolete.
configure.ac:36: You should run autoupdate.
./lib/autoconf/types.m4:805: AC_TYPE_SIGNAL is expanded from...
configure.ac:36: the top level
configure.ac:42: warning: The macro 'AC_TRY_COMPILE' is obsolete.
configure.ac:42: You should run autoupdate.
./lib/autoconf/general.m4:2845: AC_TRY_COMPILE is expanded from...
configure.ac:42: the top level
configure.ac:63: warning: The macro 'AC_TRY_COMPILE' is obsolete.
configure.ac:63: You should run autoupdate.
./lib/autoconf/general.m4:2845: AC_TRY_COMPILE is expanded from...
configure.ac:63: the top level
configure.ac:94: warning: The macro 'AC_TRY_LINK' is obsolete.
configure.ac:94: You should run autoupdate.
./lib/autoconf/general.m4:2918: AC_TRY_LINK is expanded from...
configure.ac:94: the top level
configure.ac:108: warning: The macro 'AC_TRY_LINK' is obsolete.
configure.ac:108: You should run autoupdate.
./lib/autoconf/general.m4:2918: AC_TRY_LINK is expanded from...
configure.ac:108: the top level
configure.ac:122: warning: The macro 'AC_TRY_LINK' is obsolete.
configure.ac:122: You should run autoupdate.
./lib/autoconf/general.m4:2918: AC_TRY_LINK is expanded from...
configure.ac:122: the top level
configure.ac:139: warning: The macro 'AC_TRY_RUN' is obsolete.
configure.ac:139: You should run autoupdate.
./lib/autoconf/general.m4:2995: AC_TRY_RUN is expanded from...
configure.ac:139: the top level
configure.ac:148: warning: The macro 'AC_TRY_RUN' is obsolete.
configure.ac:148: You should run autoupdate.
./lib/autoconf/general.m4:2995: AC_TRY_RUN is expanded from...
configure.ac:148: the top level
configure.ac:158: warning: The macro 'AC_TRY_RUN' is obsolete.
configure.ac:158: You should run autoupdate.
./lib/autoconf/general.m4:2995: AC_TRY_RUN is expanded from...
configure.ac:158: the top level
configure.ac:167: warning: The macro 'AC_TRY_RUN' is obsolete.
configure.ac:167: You should run autoupdate.
./lib/autoconf/general.m4:2995: AC_TRY_RUN is expanded from...
configure.ac:167: the top level
configure.ac:178: warning: The macro 'AC_TRY_RUN' is obsolete.
configure.ac:178: You should run autoupdate.
./lib/autoconf/general.m4:2995: AC_TRY_RUN is expanded from...
configure.ac:178: the top level
configure.ac:187: warning: The macro 'AC_TRY_RUN' is obsolete.
configure.ac:187: You should run autoupdate.
./lib/autoconf/general.m4:2995: AC_TRY_RUN is expanded from...
configure.ac:187: the top level
configure.ac:217: warning: AC_OUTPUT should be used without arguments.
configure.ac:217: You should run autoupdate.
configure.ac:19: installing '../../compile'
configure.ac:13: installing '../../missing'
Makefile.am: installing '../../depcomp'
libtoolize: putting auxiliary files in AC_CONFIG_AUX_DIR, '../..'.
libtoolize: copying file '../../ltmain.sh'
libtoolize: Consider adding 'AC_CONFIG_MACRO_DIRS([m4])' to configure.ac,
libtoolize: and rerunning libtoolize and aclocal.
libtoolize: Consider adding '-I m4' to ACLOCAL_AMFLAGS in Makefile.am.
configure.ac:18: warning: The macro 'AC_PROG_LIBTOOL' is obsolete.
configure.ac:18: You should run autoupdate.
aclocal.m4:122: AC_PROG_LIBTOOL is expanded from...
configure.ac:18: the top level
configure.ac:30: warning: The macro 'AC_HEADER_STDC' is obsolete.
configure.ac:30: You should run autoupdate.
./lib/autoconf/headers.m4:663: AC_HEADER_STDC is expanded from...
configure.ac:30: the top level
configure.ac:41: warning: The macro 'AC_HELP_STRING' is obsolete.
configure.ac:41: You should run autoupdate.
./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from...
configure.ac:41: the top level
configure.ac:76: warning: The macro 'AC_TRY_COMPILE' is obsolete.
configure.ac:76: You should run autoupdate.
./lib/autoconf/general.m4:2845: AC_TRY_COMPILE is expanded from...
configure.ac:76: the top level
configure.ac:70: warning: The macro 'AC_TRY_COMPILE' is obsolete.
configure.ac:70: You should run autoupdate.
./lib/autoconf/general.m4:2845: AC_TRY_COMPILE is expanded from...
configure.ac:70: the top level
configure.ac:64: warning: The macro 'AC_TRY_COMPILE' is obsolete.
configure.ac:64: You should run autoupdate.
./lib/autoconf/general.m4:2845: AC_TRY_COMPILE is expanded from...
configure.ac:64: the top level
configure.ac:110: warning: AC_OUTPUT should be used without arguments.
configure.ac:110: You should run autoupdate.
configure.ac:16: installing '../../compile'
configure.ac:12: installing '../../missing'
Makefile.am: installing '../../depcomp'
libtoolize: putting auxiliary files in AC_CONFIG_AUX_DIR, '../..'.
libtoolize: copying file '../../ltmain.sh'
libtoolize: Consider adding 'AC_CONFIG_MACRO_DIRS([m4])' to configure.ac,
libtoolize: and rerunning libtoolize and aclocal.
libtoolize: Consider adding '-I m4' to ACLOCAL_AMFLAGS in Makefile.am.
configure.ac:17: warning: The macro 'AC_LIBTOOL_DLOPEN' is obsolete.
configure.ac:17: You should run autoupdate.
aclocal.m4:8615: AC_LIBTOOL_DLOPEN is expanded from...
configure.ac:17: the top level
configure.ac:17: warning: AC_LIBTOOL_DLOPEN: Remove this warning and the call to _LT_SET_OPTION when you
configure.ac:17: put the 'dlopen' option into LT_INIT's first parameter.
./lib/autoconf/general.m4:2434: AC_DIAGNOSE is expanded from...
aclocal.m4:8615: AC_LIBTOOL_DLOPEN is expanded from...
configure.ac:17: the top level
configure.ac:18: warning: The macro 'AM_PROG_LIBTOOL' is obsolete.
configure.ac:18: You should run autoupdate.
aclocal.m4:200: AM_PROG_LIBTOOL is expanded from...
configure.ac:18: the top level
configure.ac:28: warning: The macro 'AC_HEADER_STDC' is obsolete.
configure.ac:28: You should run autoupdate.
./lib/autoconf/headers.m4:663: AC_HEADER_STDC is expanded from...
configure.ac:28: the top level
configure.ac:33: warning: The macro 'AC_TRY_COMPILE' is obsolete.
configure.ac:33: You should run autoupdate.
./lib/autoconf/general.m4:2845: AC_TRY_COMPILE is expanded from...
configure.ac:33: the top level
configure.ac:57: warning: The macro 'AC_TRY_COMPILE' is obsolete.
configure.ac:57: You should run autoupdate.
./lib/autoconf/general.m4:2845: AC_TRY_COMPILE is expanded from...
aclocal.m4:27: AX_COURIER_UNICODE_CXXFLAGS is expanded from...
configure.ac:57: the top level
configure.ac:57: warning: The macro 'AC_TRY_COMPILE' is obsolete.
configure.ac:57: You should run autoupdate.
./lib/autoconf/general.m4:2845: AC_TRY_COMPILE is expanded from...
lib/m4sugar/m4sh.m4:690: _AS_IF_ELSE is expanded from...
lib/m4sugar/m4sh.m4:697: AS_IF is expanded from...
./lib/autoconf/general.m4:2821: _AC_COMPILE_IFELSE is expanded from...
./lib/autoconf/general.m4:2837: AC_COMPILE_IFELSE is expanded from...
./lib/autoconf/general.m4:2845: AC_TRY_COMPILE is expanded from...
aclocal.m4:27: AX_COURIER_UNICODE_CXXFLAGS is expanded from...
configure.ac:57: the top level
configure.ac:57: warning: The macro 'AC_TRY_COMPILE' is obsolete.
configure.ac:57: You should run autoupdate.
./lib/autoconf/general.m4:2845: AC_TRY_COMPILE is expanded from...
lib/m4sugar/m4sh.m4:690: _AS_IF_ELSE is expanded from...
lib/m4sugar/m4sh.m4:697: AS_IF is expanded from...
./lib/autoconf/general.m4:2821: _AC_COMPILE_IFELSE is expanded from...
./lib/autoconf/general.m4:2837: AC_COMPILE_IFELSE is expanded from...
./lib/autoconf/general.m4:2845: AC_TRY_COMPILE is expanded from...
lib/m4sugar/m4sh.m4:690: _AS_IF_ELSE is expanded from...
lib/m4sugar/m4sh.m4:697: AS_IF is expanded from...
./lib/autoconf/general.m4:2821: _AC_COMPILE_IFELSE is expanded from...
./lib/autoconf/general.m4:2837: AC_COMPILE_IFELSE is expanded from...
./lib/autoconf/general.m4:2845: AC_TRY_COMPILE is expanded from...
aclocal.m4:27: AX_COURIER_UNICODE_CXXFLAGS is expanded from...
configure.ac:57: the top level
configure.ac:95: warning: AC_OUTPUT should be used without arguments.
configure.ac:95: You should run autoupdate.
configure.ac:14: installing '../../compile'
configure.ac:10: installing '../../missing'
Makefile.am: installing '../../depcomp'
libtoolize: putting auxiliary files in AC_CONFIG_AUX_DIR, '../..'.
libtoolize: copying file '../../ltmain.sh'
libtoolize: Consider adding 'AC_CONFIG_MACRO_DIRS([m4])' to configure.ac,
libtoolize: and rerunning libtoolize and aclocal.
libtoolize: Consider adding '-I m4' to ACLOCAL_AMFLAGS in Makefile.am.
configure.ac:18: warning: The macro 'AC_ISC_POSIX' is obsolete.
configure.ac:18: You should run autoupdate.
./lib/autoconf/specific.m4:732: AC_ISC_POSIX is expanded from...
configure.ac:18: the top level
configure.ac:21: warning: The macro 'AC_PROG_LIBTOOL' is obsolete.
configure.ac:21: You should run autoupdate.
aclocal.m4:122: AC_PROG_LIBTOOL is expanded from...
configure.ac:21: the top level
configure.ac:51: warning: The macro 'AC_LANG_CPLUSPLUS' is obsolete.
configure.ac:51: You should run autoupdate.
./lib/autoconf/c.m4:270: AC_LANG_CPLUSPLUS is expanded from...
configure.ac:51: the top level
configure.ac:55: warning: The macro 'AC_TRY_COMPILE' is obsolete.
configure.ac:55: You should run autoupdate.
./lib/autoconf/general.m4:2845: AC_TRY_COMPILE is expanded from...
configure.ac:55: the top level
configure.ac:74: warning: AC_OUTPUT should be used without arguments.
configure.ac:74: You should run autoupdate.
configure.ac:16: installing '../../compile'
configure.ac:12: installing '../../missing'
Makefile.am: installing '../../depcomp'
libtoolize: putting auxiliary files in AC_CONFIG_AUX_DIR, '../..'.
libtoolize: copying file '../../ltmain.sh'
libtoolize: Consider adding 'AC_CONFIG_MACRO_DIRS([m4])' to configure.ac,
libtoolize: and rerunning libtoolize and aclocal.
libtoolize: Consider adding '-I m4' to ACLOCAL_AMFLAGS in Makefile.am.
configure.ac:20: warning: The macro 'AC_ISC_POSIX' is obsolete.
configure.ac:20: You should run autoupdate.
./lib/autoconf/specific.m4:732: AC_ISC_POSIX is expanded from...
configure.ac:20: the top level
configure.ac:21: warning: The macro 'AC_PROG_LIBTOOL' is obsolete.
configure.ac:21: You should run autoupdate.
aclocal.m4:122: AC_PROG_LIBTOOL is expanded from...
configure.ac:21: the top level
configure.ac:51: warning: The macro 'AC_LANG_CPLUSPLUS' is obsolete.
configure.ac:51: You should run autoupdate.
./lib/autoconf/c.m4:270: AC_LANG_CPLUSPLUS is expanded from...
configure.ac:51: the top level
configure.ac:55: warning: The macro 'AC_TRY_COMPILE' is obsolete.
configure.ac:55: You should run autoupdate.
./lib/autoconf/general.m4:2845: AC_TRY_COMPILE is expanded from...
configure.ac:55: the top level
configure.ac:79: warning: AC_OUTPUT should be used without arguments.
configure.ac:79: You should run autoupdate.
configure.ac:16: installing '../../compile'
configure.ac:12: installing '../../missing'
Makefile.am: installing '../../depcomp'
libtoolize: putting auxiliary files in AC_CONFIG_AUX_DIR, '../..'.
libtoolize: copying file '../../ltmain.sh'
libtoolize: Consider adding 'AC_CONFIG_MACRO_DIRS([m4])' to configure.ac,
libtoolize: and rerunning libtoolize and aclocal.
libtoolize: Consider adding '-I m4' to ACLOCAL_AMFLAGS in Makefile.am.
configure.ac:23: warning: The macro 'AC_LIBTOOL_DLOPEN' is obsolete.
configure.ac:23: You should run autoupdate.
aclocal.m4:8538: AC_LIBTOOL_DLOPEN is expanded from...
configure.ac:23: the top level
configure.ac:23: warning: AC_LIBTOOL_DLOPEN: Remove this warning and the call to _LT_SET_OPTION when you
configure.ac:23: put the 'dlopen' option into LT_INIT's first parameter.
./lib/autoconf/general.m4:2434: AC_DIAGNOSE is expanded from...
aclocal.m4:8538: AC_LIBTOOL_DLOPEN is expanded from...
configure.ac:23: the top level
configure.ac:24: warning: The macro 'AM_PROG_LIBTOOL' is obsolete.
configure.ac:24: You should run autoupdate.
aclocal.m4:123: AM_PROG_LIBTOOL is expanded from...
configure.ac:24: the top level
configure.ac:57: warning: The macro 'AC_HEADER_STDC' is obsolete.
configure.ac:57: You should run autoupdate.
./lib/autoconf/headers.m4:663: AC_HEADER_STDC is expanded from...
configure.ac:57: the top level
configure.ac:69: warning: AC_OUTPUT should be used without arguments.
configure.ac:69: You should run autoupdate.
configure.ac:17: installing '../../compile'
configure.ac:12: installing '../../missing'
Makefile.am: installing '../../depcomp'
libtoolize: putting auxiliary files in AC_CONFIG_AUX_DIR, '../..'.
libtoolize: copying file '../../ltmain.sh'
libtoolize: Consider adding 'AC_CONFIG_MACRO_DIRS([m4])' to configure.ac,
libtoolize: and rerunning libtoolize and aclocal.
libtoolize: Consider adding '-I m4' to ACLOCAL_AMFLAGS in Makefile.am.
configure.ac:13: warning: The macro 'AC_CANONICAL_SYSTEM' is obsolete.
configure.ac:13: You should run autoupdate.
./lib/autoconf/general.m4:2081: AC_CANONICAL_SYSTEM is expanded from...
configure.ac:13: the top level
configure.ac:23: warning: The macro 'AC_LIBTOOL_DLOPEN' is obsolete.
configure.ac:23: You should run autoupdate.
aclocal.m4:8615: AC_LIBTOOL_DLOPEN is expanded from...
configure.ac:23: the top level
configure.ac:23: warning: AC_LIBTOOL_DLOPEN: Remove this warning and the call to _LT_SET_OPTION when you
configure.ac:23: put the 'dlopen' option into LT_INIT's first parameter.
./lib/autoconf/general.m4:2434: AC_DIAGNOSE is expanded from...
aclocal.m4:8615: AC_LIBTOOL_DLOPEN is expanded from...
configure.ac:23: the top level
configure.ac:24: warning: The macro 'AM_PROG_LIBTOOL' is obsolete.
configure.ac:24: You should run autoupdate.
aclocal.m4:200: AM_PROG_LIBTOOL is expanded from...
configure.ac:24: the top level
configure.ac:47: warning: The macro 'AC_HEADER_STDC' is obsolete.
configure.ac:47: You should run autoupdate.
./lib/autoconf/headers.m4:663: AC_HEADER_STDC is expanded from...
configure.ac:47: the top level
configure.ac:48: warning: The macro 'AC_HEADER_TIME' is obsolete.
configure.ac:48: You should run autoupdate.
./lib/autoconf/headers.m4:702: AC_HEADER_TIME is expanded from...
configure.ac:48: the top level
configure.ac:61: warning: The macro 'AC_LANG_CPLUSPLUS' is obsolete.
configure.ac:61: You should run autoupdate.
./lib/autoconf/c.m4:270: AC_LANG_CPLUSPLUS is expanded from...
configure.ac:61: the top level
configure.ac:63: warning: The macro 'AC_LANG_C' is obsolete.
configure.ac:63: You should run autoupdate.
./lib/autoconf/c.m4:72: AC_LANG_C is expanded from...
configure.ac:63: the top level
configure.ac:72: warning: The macro 'AC_TRY_COMPILE' is obsolete.
configure.ac:72: You should run autoupdate.
./lib/autoconf/general.m4:2845: AC_TRY_COMPILE is expanded from...
aclocal.m4:27: AX_COURIER_UNICODE_CXXFLAGS is expanded from...
configure.ac:72: the top level
configure.ac:72: warning: The macro 'AC_TRY_COMPILE' is obsolete.
configure.ac:72: You should run autoupdate.
./lib/autoconf/general.m4:2845: AC_TRY_COMPILE is expanded from...
lib/m4sugar/m4sh.m4:690: _AS_IF_ELSE is expanded from...
lib/m4sugar/m4sh.m4:697: AS_IF is expanded from...
./lib/autoconf/general.m4:2821: _AC_COMPILE_IFELSE is expanded from...
./lib/autoconf/general.m4:2837: AC_COMPILE_IFELSE is expanded from...
./lib/autoconf/general.m4:2845: AC_TRY_COMPILE is expanded from...
aclocal.m4:27: AX_COURIER_UNICODE_CXXFLAGS is expanded from...
configure.ac:72: the top level
configure.ac:72: warning: The macro 'AC_TRY_COMPILE' is obsolete.
configure.ac:72: You should run autoupdate.
./lib/autoconf/general.m4:2845: AC_TRY_COMPILE is expanded from...
lib/m4sugar/m4sh.m4:690: _AS_IF_ELSE is expanded from...
lib/m4sugar/m4sh.m4:697: AS_IF is expanded from...
./lib/autoconf/general.m4:2821: _AC_COMPILE_IFELSE is expanded from...
./lib/autoconf/general.m4:2837: AC_COMPILE_IFELSE is expanded from...
./lib/autoconf/general.m4:2845: AC_TRY_COMPILE is expanded from...
lib/m4sugar/m4sh.m4:690: _AS_IF_ELSE is expanded from...
lib/m4sugar/m4sh.m4:697: AS_IF is expanded from...
./lib/autoconf/general.m4:2821: _AC_COMPILE_IFELSE is expanded from...
./lib/autoconf/general.m4:2837: AC_COMPILE_IFELSE is expanded from...
./lib/autoconf/general.m4:2845: AC_TRY_COMPILE is expanded from...
aclocal.m4:27: AX_COURIER_UNICODE_CXXFLAGS is expanded from...
configure.ac:72: the top level
configure.ac:99: warning: The macro 'AC_TRY_COMPILE' is obsolete.
configure.ac:99: You should run autoupdate.
./lib/autoconf/general.m4:2845: AC_TRY_COMPILE is expanded from...
configure.ac:99: the top level
configure.ac:169: warning: AC_OUTPUT should be used without arguments.
configure.ac:169: You should run autoupdate.
configure.ac:19: installing '../../compile'
configure.ac:14: installing '../../missing'
Makefile.am: installing '../../depcomp'
libtoolize: putting auxiliary files in AC_CONFIG_AUX_DIR, '../..'.
libtoolize: copying file '../../ltmain.sh'
libtoolize: Consider adding 'AC_CONFIG_MACRO_DIRS([m4])' to configure.ac,
libtoolize: and rerunning libtoolize and aclocal.
libtoolize: Consider adding '-I m4' to ACLOCAL_AMFLAGS in Makefile.am.
configure.ac:23: warning: The macro 'AM_PROG_LIBTOOL' is obsolete.
configure.ac:23: You should run autoupdate.
aclocal.m4:123: AM_PROG_LIBTOOL is expanded from...
configure.ac:23: the top level
configure.ac:35: warning: The macro 'AC_LANG_CPLUSPLUS' is obsolete.
configure.ac:35: You should run autoupdate.
./lib/autoconf/c.m4:270: AC_LANG_CPLUSPLUS is expanded from...
configure.ac:35: the top level
configure.ac:37: warning: The macro 'AC_TRY_COMPILE' is obsolete.
configure.ac:37: You should run autoupdate.
./lib/autoconf/general.m4:2845: AC_TRY_COMPILE is expanded from...
configure.ac:37: the top level
configure.ac:43: warning: The macro 'AC_LANG_C' is obsolete.
configure.ac:43: You should run autoupdate.
./lib/autoconf/c.m4:72: AC_LANG_C is expanded from...
configure.ac:43: the top level
configure.ac:56: warning: The macro 'AC_LANG_CPLUSPLUS' is obsolete.
configure.ac:56: You should run autoupdate.
./lib/autoconf/c.m4:270: AC_LANG_CPLUSPLUS is expanded from...
configure.ac:56: the top level
configure.ac:58: warning: The macro 'AC_TRY_COMPILE' is obsolete.
configure.ac:58: You should run autoupdate.
./lib/autoconf/general.m4:2845: AC_TRY_COMPILE is expanded from...
configure.ac:58: the top level
configure.ac:92: warning: The macro 'AC_LANG_C' is obsolete.
configure.ac:92: You should run autoupdate.
./lib/autoconf/c.m4:72: AC_LANG_C is expanded from...
configure.ac:92: the top level
configure.ac:152: warning: The macro 'AC_HEADER_STDC' is obsolete.
configure.ac:152: You should run autoupdate.
./lib/autoconf/headers.m4:663: AC_HEADER_STDC is expanded from...
configure.ac:152: the top level
configure.ac:154: warning: The macro 'AC_HEADER_TIME' is obsolete.
configure.ac:154: You should run autoupdate.
./lib/autoconf/headers.m4:702: AC_HEADER_TIME is expanded from...
configure.ac:154: the top level
configure.ac:168: warning: The macro 'AC_TRY_RUN' is obsolete.
configure.ac:168: You should run autoupdate.
./lib/autoconf/general.m4:2995: AC_TRY_RUN is expanded from...
configure.ac:168: the top level
configure.ac:201: warning: The macro 'AC_TYPE_SIGNAL' is obsolete.
configure.ac:201: You should run autoupdate.
./lib/autoconf/types.m4:805: AC_TYPE_SIGNAL is expanded from...
configure.ac:201: the top level
configure.ac:221: warning: The macro 'AC_TRY_LINK' is obsolete.
configure.ac:221: You should run autoupdate.
./lib/autoconf/general.m4:2918: AC_TRY_LINK is expanded from...
configure.ac:221: the top level
configure.ac:243: warning: The macro 'AC_TRY_LINK' is obsolete.
configure.ac:243: You should run autoupdate.
./lib/autoconf/general.m4:2918: AC_TRY_LINK is expanded from...
configure.ac:243: the top level
configure.ac:260: warning: The macro 'AC_TRY_COMPILE' is obsolete.
configure.ac:260: You should run autoupdate.
./lib/autoconf/general.m4:2845: AC_TRY_COMPILE is expanded from...
configure.ac:260: the top level
configure.ac:752: warning: AC_OUTPUT should be used without arguments.
configure.ac:752: You should run autoupdate.
configure.ac:18: installing '../../compile'
configure.ac:12: installing '../../missing'
Makefile.am: installing '../../depcomp'
libtoolize: putting auxiliary files in '.'.
libtoolize: copying file './ltmain.sh'
libtoolize: Consider adding 'AC_CONFIG_MACRO_DIRS([m4])' to configure.ac,
libtoolize: and rerunning libtoolize and aclocal.
libtoolize: Consider adding '-I m4' to ACLOCAL_AMFLAGS in Makefile.am.
configure.ac:17: warning: The macro 'AM_PROG_LIBTOOL' is obsolete.
configure.ac:17: You should run autoupdate.
aclocal.m4:200: AM_PROG_LIBTOOL is expanded from...
configure.ac:17: the top level
configure.ac:131: warning: The macro 'AC_TRY_COMPILE' is obsolete.
configure.ac:131: You should run autoupdate.
./lib/autoconf/general.m4:2845: AC_TRY_COMPILE is expanded from...
aclocal.m4:76: AX_COURIER_UNICODE_VERSION is expanded from...
configure.ac:131: the top level
configure.ac:189: warning: AC_OUTPUT should be used without arguments.
configure.ac:189: You should run autoupdate.
configure.ac:12: installing './compile'
configure.ac:10: installing './missing'
patching file ./ltmain.sh
Hunk #1 succeeded at 7488 (offset 268 lines).
Hunk #2 succeeded at 7892 (offset 277 lines).
make[1]: Leaving directory '/<<PKGBUILDDIR>>'
dh_autotools-dev_updateconfig
dh_autotools-dev_updateconfig: warning: Compatibility levels before 10 are deprecated (level 9 in use)
dh_autotools-dev_updateconfig: warning: dh_autotools-dev_updateconfig is deprecated; please see dh_autotools-dev_updateconfig(1) for a replacement
dh_autotools-dev_updateconfig: warning: This feature will be removed in compat 12.
debian/rules override_dh_auto_configure
make[1]: Entering directory '/<<PKGBUILDDIR>>'
dh_auto_configure -- \
CAT=/bin/cat \
--enable-use-dotlock=1 \
--enable-use-flock=1 \
--enable-sendmail=/usr/sbin/sendmail \
--enable-maildirquota \
--enable-authlib-tempreject=0 \
--with-db=gdbm \
--with-locking-method=fcntl
dh_auto_configure: warning: Compatibility levels before 10 are deprecated (level 9 in use)
./configure --build=aarch64-linux-gnu --prefix=/usr --includedir=\${prefix}/include --mandir=\${prefix}/share/man --infodir=\${prefix}/share/info --sysconfdir=/etc --localstatedir=/var --disable-option-checking --disable-silent-rules --libdir=\${prefix}/lib/aarch64-linux-gnu --libexecdir=\${prefix}/lib/aarch64-linux-gnu --disable-maintainer-mode --disable-dependency-tracking CAT=/bin/cat --enable-use-dotlock=1 --enable-use-flock=1 --enable-sendmail=/usr/sbin/sendmail --enable-maildirquota --enable-authlib-tempreject=0 --with-db=gdbm --with-locking-method=fcntl
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a race-free mkdir -p... /usr/bin/mkdir -p
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking whether make supports nested variables... yes
checking for gcc... gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether the compiler supports GNU C... yes
checking whether gcc accepts -g... yes
checking for gcc option to enable C11 features... none needed
checking whether gcc understands -c and -o together... yes
checking whether make supports the include directive... yes (GNU style)
checking dependency style of gcc... none
checking for gawk... (cached) mawk
checking whether ln -s works... yes
checking whether make sets $(MAKE)... (cached) yes
checking build system type... aarch64-unknown-linux-gnu
checking host system type... aarch64-unknown-linux-gnu
checking how to print strings... printf
checking for a sed that does not truncate output... /usr/bin/sed
checking for grep that handles long lines and -e... /usr/bin/grep
checking for egrep... /usr/bin/grep -E
checking for fgrep... /usr/bin/grep -F
checking for ld used by gcc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B
checking the name lister (/usr/bin/nm -B) interface... BSD nm
checking the maximum length of command line arguments... 1572864
checking how to convert aarch64-unknown-linux-gnu file names to aarch64-unknown-linux-gnu format... func_convert_file_noop
checking how to convert aarch64-unknown-linux-gnu file names to toolchain format... func_convert_file_noop
checking for /usr/bin/ld option to reload object files... -r
checking for file... file
checking for objdump... objdump
checking how to recognize dependent libraries... pass_all
checking for dlltool... no
checking how to associate runtime and link libraries... printf %s\n
checking for ar... ar
checking for archiver @FILE support... @
checking for strip... strip
checking for ranlib... ranlib
checking command to parse /usr/bin/nm -B output from gcc object... ok
checking for sysroot... no
checking for a working dd... /usr/bin/dd
checking how to truncate binary pipes... /usr/bin/dd bs=4096 count=1
checking for mt... no
checking if : is a manifest tool... no
checking for stdio.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for strings.h... yes
checking for sys/stat.h... yes
checking for sys/types.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if gcc supports -fno-rtti -fno-exceptions... no
checking for gcc option to produce PIC... -fPIC -DPIC
checking if gcc PIC flag -fPIC -DPIC works... yes
checking if gcc static flag -static works... yes
checking if gcc supports -c -o file.o... yes
checking if gcc supports -c -o file.o... (cached) yes
checking whether the gcc linker (/usr/bin/ld) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking for pcre.h... yes
checking for gdbm_open in -lgdbm... yes
checking for gdbm_open... yes
checking courier-unicode library and version... ok
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating Makefile
config.status: creating dbobj.h
config.status: creating dbobj.config
config.status: creating maildrop.spec
config.status: creating maildrop.lpspec
config.status: creating README.html
config.status: creating INSTALL.html
config.status: executing depfiles commands
config.status: executing libtool commands
=== configuring in libs/numlib (/<<PKGBUILDDIR>>/libs/numlib)
configure: running /bin/bash ./configure --disable-option-checking '--prefix=/usr' '--with-version=2.9.3' '--with-package=maildrop' '--build=aarch64-linux-gnu' '--includedir=${prefix}/include' '--mandir=${prefix}/share/man' '--infodir=${prefix}/share/info' '--sysconfdir=/etc' '--localstatedir=/var' '--disable-silent-rules' '--libdir=${prefix}/lib/aarch64-linux-gnu' '--libexecdir=${prefix}/lib/aarch64-linux-gnu' '--disable-maintainer-mode' '--disable-dependency-tracking' 'CAT=/bin/cat' '--enable-use-dotlock=1' '--enable-use-flock=1' '--enable-sendmail=/usr/sbin/sendmail' '--enable-maildirquota' '--enable-authlib-tempreject=0' '--with-db=gdbm' '--with-locking-method=fcntl' 'build_alias=aarch64-linux-gnu' 'CFLAGS=-g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wall -pedantic' 'LDFLAGS=-Wl,-z,relro -Wl,-z,now -Wl,--as-needed' 'CPPFLAGS=-Wdate-time -D_FORTIFY_SOURCE=2' --cache-file=/dev/null --srcdir=.
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a race-free mkdir -p... /usr/bin/mkdir -p
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking whether make supports nested variables... yes
checking for gawk... (cached) mawk
checking for gcc... gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether the compiler supports GNU C... yes
checking whether gcc accepts -g... yes
checking for gcc option to enable C11 features... none needed
checking whether gcc understands -c and -o together... yes
checking whether make supports the include directive... yes (GNU style)
checking dependency style of gcc... none
checking whether ln -s works... yes
checking build system type... aarch64-unknown-linux-gnu
checking host system type... aarch64-unknown-linux-gnu
checking how to print strings... printf
checking for a sed that does not truncate output... /usr/bin/sed
checking for grep that handles long lines and -e... /usr/bin/grep
checking for egrep... /usr/bin/grep -E
checking for fgrep... /usr/bin/grep -F
checking for ld used by gcc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B
checking the name lister (/usr/bin/nm -B) interface... BSD nm
checking the maximum length of command line arguments... 1572864
checking how to convert aarch64-unknown-linux-gnu file names to aarch64-unknown-linux-gnu format... func_convert_file_noop
checking how to convert aarch64-unknown-linux-gnu file names to toolchain format... func_convert_file_noop
checking for /usr/bin/ld option to reload object files... -r
checking for file... file
checking for objdump... objdump
checking how to recognize dependent libraries... pass_all
checking for dlltool... no
checking how to associate runtime and link libraries... printf %s\n
checking for ar... ar
checking for archiver @FILE support... @
checking for strip... strip
checking for ranlib... ranlib
checking command to parse /usr/bin/nm -B output from gcc object... ok
checking for sysroot... no
checking for a working dd... /usr/bin/dd
checking how to truncate binary pipes... /usr/bin/dd bs=4096 count=1
checking for mt... no
checking if : is a manifest tool... no
checking for stdio.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for strings.h... yes
checking for sys/stat.h... yes
checking for sys/types.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if gcc supports -fno-rtti -fno-exceptions... no
checking for gcc option to produce PIC... -fPIC -DPIC
checking if gcc PIC flag -fPIC -DPIC works... yes
checking if gcc static flag -static works... yes
checking if gcc supports -c -o file.o... yes
checking if gcc supports -c -o file.o... (cached) yes
checking whether the gcc linker (/usr/bin/ld) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking for unistd.h... (cached) yes
checking for stdint.h... (cached) yes
checking for int64_t... yes
checking for uid_t... yes
checking for gid_t... yes
checking for pid_t... yes
checking for gcc option to enable large file support... none needed
checking for setgroups... yes
checking for initgroups... yes
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating Makefile
config.status: creating config.h
config.status: executing depfiles commands
config.status: executing libtool commands
=== configuring in libs/liblock (/<<PKGBUILDDIR>>/libs/liblock)
configure: running /bin/bash ./configure --disable-option-checking '--prefix=/usr' '--with-version=2.9.3' '--with-package=maildrop' '--build=aarch64-linux-gnu' '--includedir=${prefix}/include' '--mandir=${prefix}/share/man' '--infodir=${prefix}/share/info' '--sysconfdir=/etc' '--localstatedir=/var' '--disable-silent-rules' '--libdir=${prefix}/lib/aarch64-linux-gnu' '--libexecdir=${prefix}/lib/aarch64-linux-gnu' '--disable-maintainer-mode' '--disable-dependency-tracking' 'CAT=/bin/cat' '--enable-use-dotlock=1' '--enable-use-flock=1' '--enable-sendmail=/usr/sbin/sendmail' '--enable-maildirquota' '--enable-authlib-tempreject=0' '--with-db=gdbm' '--with-locking-method=fcntl' 'build_alias=aarch64-linux-gnu' 'CFLAGS=-g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wall -pedantic' 'LDFLAGS=-Wl,-z,relro -Wl,-z,now -Wl,--as-needed' 'CPPFLAGS=-Wdate-time -D_FORTIFY_SOURCE=2' --cache-file=/dev/null --srcdir=.
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a race-free mkdir -p... /usr/bin/mkdir -p
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking whether make supports nested variables... yes
checking for gawk... (cached) mawk
checking for gcc... gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether the compiler supports GNU C... yes
checking whether gcc accepts -g... yes
checking for gcc option to enable C11 features... none needed
checking whether gcc understands -c and -o together... yes
checking whether make supports the include directive... yes (GNU style)
checking dependency style of gcc... none
checking whether ln -s works... yes
checking build system type... aarch64-unknown-linux-gnu
checking host system type... aarch64-unknown-linux-gnu
checking how to print strings... printf
checking for a sed that does not truncate output... /usr/bin/sed
checking for grep that handles long lines and -e... /usr/bin/grep
checking for egrep... /usr/bin/grep -E
checking for fgrep... /usr/bin/grep -F
checking for ld used by gcc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B
checking the name lister (/usr/bin/nm -B) interface... BSD nm
checking the maximum length of command line arguments... 1572864
checking how to convert aarch64-unknown-linux-gnu file names to aarch64-unknown-linux-gnu format... func_convert_file_noop
checking how to convert aarch64-unknown-linux-gnu file names to toolchain format... func_convert_file_noop
checking for /usr/bin/ld option to reload object files... -r
checking for file... file
checking for objdump... objdump
checking how to recognize dependent libraries... pass_all
checking for dlltool... no
checking how to associate runtime and link libraries... printf %s\n
checking for ar... ar
checking for archiver @FILE support... @
checking for strip... strip
checking for ranlib... ranlib
checking command to parse /usr/bin/nm -B output from gcc object... ok
checking for sysroot... no
checking for a working dd... /usr/bin/dd
checking how to truncate binary pipes... /usr/bin/dd bs=4096 count=1
checking for mt... no
checking if : is a manifest tool... no
checking for stdio.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for strings.h... yes
checking for sys/stat.h... yes
checking for sys/types.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if gcc supports -fno-rtti -fno-exceptions... no
checking for gcc option to produce PIC... -fPIC -DPIC
checking if gcc PIC flag -fPIC -DPIC works... yes
checking if gcc static flag -static works... yes
checking if gcc supports -c -o file.o... yes
checking if gcc supports -c -o file.o... (cached) yes
checking whether the gcc linker (/usr/bin/ld) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking for errno.h... yes
checking for fcntl.h... yes
checking for sys/fcntl.h... yes
checking for sys/ioctl.h... yes
checking for sys/file.h... yes
checking for unistd.h... (cached) yes
checking for sysexits.h... yes
checking for egrep... (cached) /usr/bin/grep -E
checking for sys/wait.h that is POSIX.1 compatible... yes
checking for an ANSI C-conforming const... yes
checking for off_t... yes
checking for pid_t... yes
checking return type of signal handlers... void
checking for gcc option to enable large file support... none needed
checking for off64_t... no
checking for flock_t... no
checking for getdtablesize... yes
checking for setpgrp... yes
checking for sysconf... yes
checking for setpgrp... (cached) yes
checking whether setpgrp requires zero arguments... yes
checking for fcntl... yes
checking for flock... yes
checking for lockf... yes
checking for locking method... configure: error: fcntl test failed.
configure: error: ./configure failed for libs/liblock
tail -v -n \+0 config.log
==> config.log <==
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.
It was created by maildrop configure 2.9.3, which was
generated by GNU Autoconf 2.72. Invocation command line was
$ ./configure --build=aarch64-linux-gnu --prefix=/usr '--includedir=${prefix}/include' '--mandir=${prefix}/share/man' '--infodir=${prefix}/share/info' --sysconfdir=/etc --localstatedir=/var --disable-option-checking --disable-silent-rules '--libdir=${prefix}/lib/aarch64-linux-gnu' '--libexecdir=${prefix}/lib/aarch64-linux-gnu' --disable-maintainer-mode --disable-dependency-tracking CAT=/bin/cat --enable-use-dotlock=1 --enable-use-flock=1 --enable-sendmail=/usr/sbin/sendmail --enable-maildirquota --enable-authlib-tempreject=0 --with-db=gdbm --with-locking-method=fcntl
## --------- ##
## Platform. ##
## --------- ##
hostname = sbuild
uname -m = aarch64
uname -r = 6.1.0-27-cloud-arm64
uname -s = Linux
uname -v = #1 SMP Debian 6.1.115-1 (2024-11-01)
/usr/bin/uname -p = unknown
/bin/uname -X = unknown
/bin/arch = aarch64
/usr/bin/arch -k = unknown
/usr/convex/getsysinfo = unknown
/usr/bin/hostinfo = unknown
/bin/machine = unknown
/usr/bin/oslevel = unknown
/bin/universe = unknown
PATH: /usr/local/sbin/
PATH: /usr/local/bin/
PATH: /usr/sbin/
PATH: /usr/bin/
PATH: /sbin/
PATH: /bin/
PATH: /usr/games/
## ----------- ##
## Core tests. ##
## ----------- ##
configure:2421: looking for aux files: config.guess config.sub ltmain.sh compile missing install-sh
configure:2434: trying ./
configure:2463: ./config.guess found
configure:2463: ./config.sub found
configure:2463: ./ltmain.sh found
configure:2463: ./compile found
configure:2463: ./missing found
configure:2445: ./install-sh found
configure:2595: checking for a BSD-compatible install
configure:2669: result: /usr/bin/install -c
configure:2680: checking whether build environment is sane
configure:2735: result: yes
configure:2896: checking for a race-free mkdir -p
configure:2939: result: /usr/bin/mkdir -p
configure:2946: checking for gawk
configure:2982: result: no
configure:2946: checking for mawk
configure:2967: found /usr/bin/mawk
configure:2979: result: mawk
configure:2990: checking whether make sets $(MAKE)
configure:3014: result: yes
configure:3044: checking whether make supports nested variables
configure:3063: result: yes
configure:3258: checking for gcc
configure:3279: found /usr/bin/gcc
configure:3291: result: gcc
configure:3650: checking for C compiler version
configure:3659: gcc --version >&5
gcc (Debian 14.2.0-8) 14.2.0
Copyright (C) 2024 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
configure:3670: $? = 0
configure:3659: gcc -v >&5
Using built-in specs.
COLLECT_GCC=gcc
COLLECT_LTO_WRAPPER=/usr/libexec/gcc/aarch64-linux-gnu/14/lto-wrapper
OFFLOAD_TARGET_NAMES=nvptx-none
OFFLOAD_TARGET_DEFAULT=1
Target: aarch64-linux-gnu
Configured with: ../src/configure -v --with-pkgversion='Debian 14.2.0-8' --with-bugurl=file:///usr/share/doc/gcc-14/README.Bugs --enable-languages=c,ada,c++,go,d,fortran,objc,obj-c++,m2,rust --prefix=/usr --with-gcc-major-version-only --program-suffix=-14 --program-prefix=aarch64-linux-gnu- --enable-shared --enable-linker-build-id --libexecdir=/usr/libexec --without-included-gettext --enable-threads=posix --libdir=/usr/lib --enable-nls --enable-bootstrap --enable-clocale=gnu --enable-libstdcxx-debug --enable-libstdcxx-time=yes --with-default-libstdcxx-abi=new --enable-libstdcxx-backtrace --enable-gnu-unique-object --disable-libquadmath --disable-libquadmath-support --enable-plugin --enable-default-pie --with-system-zlib --enable-libphobos-checking=release --with-target-system-zlib=auto --enable-objc-gc=auto --enable-multiarch --enable-fix-cortex-a53-843419 --disable-werror --enable-offload-targets=nvptx-none=/build/reproducible-path/gcc-14-14.2.0/debian/tmp-nvptx/usr --enable-offload-defaulted --without-cuda-driver --enable-checking=release --build=aarch64-linux-gnu --host=aarch64-linux-gnu --target=aarch64-linux-gnu --with-build-config=bootstrap-lto-lean --enable-link-serialization=2
Thread model: posix
Supported LTO compression algorithms: zlib zstd
gcc version 14.2.0 (Debian 14.2.0-8)
... rest of stderr output deleted ...
configure:3670: $? = 0
configure:3659: gcc -V >&5
gcc: error: unrecognized command-line option '-V'
gcc: fatal error: no input files
compilation terminated.
configure:3670: $? = 1
configure:3659: gcc -qversion >&5
gcc: error: unrecognized command-line option '-qversion'; did you mean '--version'?
gcc: fatal error: no input files
compilation terminated.
configure:3670: $? = 1
configure:3659: gcc -version >&5
gcc: error: unrecognized command-line option '-version'
gcc: fatal error: no input files
compilation terminated.
configure:3670: $? = 1
configure:3690: checking whether the C compiler works
configure:3712: gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wall -pedantic -Wdate-time -D_FORTIFY_SOURCE=2 -Wl,-z,relro -Wl,-z,now -Wl,--as-needed conftest.c >&5
configure:3716: $? = 0
configure:3767: result: yes
configure:3771: checking for C compiler default output file name
configure:3773: result: a.out
configure:3779: checking for suffix of executables
configure:3786: gcc -o conftest -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wall -pedantic -Wdate-time -D_FORTIFY_SOURCE=2 -Wl,-z,relro -Wl,-z,now -Wl,--as-needed conftest.c >&5
configure:3790: $? = 0
configure:3814: result:
configure:3838: checking whether we are cross compiling
configure:3846: gcc -o conftest -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wall -pedantic -Wdate-time -D_FORTIFY_SOURCE=2 -Wl,-z,relro -Wl,-z,now -Wl,--as-needed conftest.c >&5
configure:3850: $? = 0
configure:3857: ./conftest
configure:3861: $? = 0
configure:3876: result: no
configure:3882: checking for suffix of object files
configure:3905: gcc -c -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wall -pedantic -Wdate-time -D_FORTIFY_SOURCE=2 conftest.c >&5
configure:3909: $? = 0
configure:3933: result: o
configure:3937: checking whether the compiler supports GNU C
configure:3957: gcc -c -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wall -pedantic -Wdate-time -D_FORTIFY_SOURCE=2 conftest.c >&5
configure:3957: $? = 0
configure:3969: result: yes
configure:3980: checking whether gcc accepts -g
configure:4001: gcc -c -g -Wdate-time -D_FORTIFY_SOURCE=2 conftest.c >&5
configure:4001: $? = 0
configure:4048: result: yes
configure:4068: checking for gcc option to enable C11 features
configure:4083: gcc -c -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wall -pedantic -Wdate-time -D_FORTIFY_SOURCE=2 conftest.c >&5
configure:4083: $? = 0
configure:4102: result: none needed
configure:4226: checking whether gcc understands -c and -o together
configure:4249: gcc -c conftest.c -o conftest2.o
configure:4252: $? = 0
configure:4249: gcc -c conftest.c -o conftest2.o
configure:4252: $? = 0
configure:4265: result: yes
configure:4285: checking whether make supports the include directive
configure:4300: make -f confmf.GNU && cat confinc.out
make[2]: Entering directory '/<<PKGBUILDDIR>>'
make[2]: Leaving directory '/<<PKGBUILDDIR>>'
this is the am__doit target
configure:4303: $? = 0
configure:4322: result: yes (GNU style)
configure:4348: checking dependency style of gcc
configure:4461: result: none
configure:4480: checking for gawk
configure:4513: result: mawk
configure:4525: checking whether ln -s works
configure:4529: result: yes
configure:4536: checking whether make sets $(MAKE)
configure:4560: result: yes
configure:4601: checking build system type
configure:4617: result: aarch64-unknown-linux-gnu
configure:4637: checking host system type
configure:4652: result: aarch64-unknown-linux-gnu
configure:4693: checking how to print strings
configure:4720: result: printf
configure:4741: checking for a sed that does not truncate output
configure:4813: result: /usr/bin/sed
configure:4831: checking for grep that handles long lines and -e
configure:4897: result: /usr/bin/grep
configure:4902: checking for egrep
configure:4972: result: /usr/bin/grep -E
configure:4979: checking for fgrep
configure:5049: result: /usr/bin/grep -F
configure:5086: checking for ld used by gcc
configure:5155: result: /usr/bin/ld
configure:5162: checking if the linker (/usr/bin/ld) is GNU ld
configure:5179: result: yes
configure:5191: checking for BSD- or MS-compatible name lister (nm)
configure:5247: result: /usr/bin/nm -B
configure:5389: checking the name lister (/usr/bin/nm -B) interface
configure:5397: gcc -c -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wall -pedantic -Wdate-time -D_FORTIFY_SOURCE=2 conftest.c >&5
configure:5400: /usr/bin/nm -B "conftest.o"
configure:5403: output
0000000000000000 B some_variable
configure:5411: result: BSD nm
configure:5415: checking the maximum length of command line arguments
configure:5548: result: 1572864
configure:5596: checking how to convert aarch64-unknown-linux-gnu file names to aarch64-unknown-linux-gnu format
configure:5638: result: func_convert_file_noop
configure:5645: checking how to convert aarch64-unknown-linux-gnu file names to toolchain format
configure:5667: result: func_convert_file_noop
configure:5674: checking for /usr/bin/ld option to reload object files
configure:5683: result: -r
configure:5763: checking for file
configure:5784: found /usr/bin/file
configure:5796: result: file
configure:5873: checking for objdump
configure:5894: found /usr/bin/objdump
configure:5906: result: objdump
configure:5938: checking how to recognize dependent libraries
configure:6140: result: pass_all
configure:6231: checking for dlltool
configure:6267: result: no
configure:6297: checking how to associate runtime and link libraries
configure:6326: result: printf %s\n
configure:6393: checking for ar
configure:6414: found /usr/bin/ar
configure:6426: result: ar
configure:6479: checking for archiver @FILE support
configure:6497: gcc -c -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wall -pedantic -Wdate-time -D_FORTIFY_SOURCE=2 conftest.c >&5
configure:6497: $? = 0
configure:6501: ar cr libconftest.a @conftest.lst >&5
configure:6504: $? = 0
configure:6509: ar cr libconftest.a @conftest.lst >&5
ar: conftest.o: No such file or directory
configure:6512: $? = 1
configure:6525: result: @
configure:6589: checking for strip
configure:6610: found /usr/bin/strip
configure:6622: result: strip
configure:6700: checking for ranlib
configure:6721: found /usr/bin/ranlib
configure:6733: result: ranlib
configure:6835: checking command to parse /usr/bin/nm -B output from gcc object
configure:6989: gcc -c -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wall -pedantic -Wdate-time -D_FORTIFY_SOURCE=2 conftest.c >&5
configure:6992: $? = 0
configure:6996: /usr/bin/nm -B conftest.o | /usr/bin/sed -n -e 's/^.*[ ]\([ABCDGIRSTW][ABCDGIRSTW]*\)[ ][ ]*\([_A-Za-z][_A-Za-z0-9]*\)$/\1 \2 \2/p' | /usr/bin/sed '/ __gnu_lto/d' > conftest.nm
configure:7062: gcc -o conftest -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wall -pedantic -Wdate-time -D_FORTIFY_SOURCE=2 -Wl,-z,relro -Wl,-z,now -Wl,--as-needed conftest.c conftstm.o >&5
conftest.c:29:20: warning: ISO C forbids conversion of function pointer to object pointer type [-Wpedantic]
29 | {"nm_test_func", (void *) &nm_test_func},
| ^
configure:7065: $? = 0
configure:7104: result: ok
configure:7151: checking for sysroot
configure:7183: result: no
configure:7190: checking for a working dd
configure:7235: result: /usr/bin/dd
configure:7239: checking how to truncate binary pipes
configure:7256: result: /usr/bin/dd bs=4096 count=1
configure:7596: checking for mt
configure:7632: result: no
configure:7652: checking if : is a manifest tool
configure:7659: : '-?'
configure:7668: result: no
configure:8407: checking for stdio.h
configure:8407: gcc -c -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wall -pedantic -Wdate-time -D_FORTIFY_SOURCE=2 conftest.c >&5
configure:8407: $? = 0
configure:8407: result: yes
configure:8407: checking for stdlib.h
configure:8407: gcc -c -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wall -pedantic -Wdate-time -D_FORTIFY_SOURCE=2 conftest.c >&5
configure:8407: $? = 0
configure:8407: result: yes
configure:8407: checking for string.h
configure:8407: gcc -c -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wall -pedantic -Wdate-time -D_FORTIFY_SOURCE=2 conftest.c >&5
configure:8407: $? = 0
configure:8407: result: yes
configure:8407: checking for inttypes.h
configure:8407: gcc -c -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wall -pedantic -Wdate-time -D_FORTIFY_SOURCE=2 conftest.c >&5
configure:8407: $? = 0
configure:8407: result: yes
configure:8407: checking for stdint.h
configure:8407: gcc -c -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wall -pedantic -Wdate-time -D_FORTIFY_SOURCE=2 conftest.c >&5
configure:8407: $? = 0
configure:8407: result: yes
configure:8407: checking for strings.h
configure:8407: gcc -c -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wall -pedantic -Wdate-time -D_FORTIFY_SOURCE=2 conftest.c >&5
configure:8407: $? = 0
configure:8407: result: yes
configure:8407: checking for sys/stat.h
configure:8407: gcc -c -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wall -pedantic -Wdate-time -D_FORTIFY_SOURCE=2 conftest.c >&5
configure:8407: $? = 0
configure:8407: result: yes
configure:8407: checking for sys/types.h
configure:8407: gcc -c -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wall -pedantic -Wdate-time -D_FORTIFY_SOURCE=2 conftest.c >&5
configure:8407: $? = 0
configure:8407: result: yes
configure:8407: checking for unistd.h
configure:8407: gcc -c -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wall -pedantic -Wdate-time -D_FORTIFY_SOURCE=2 conftest.c >&5
configure:8407: $? = 0
configure:8407: result: yes
configure:8432: checking for dlfcn.h
configure:8432: gcc -c -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wall -pedantic -Wdate-time -D_FORTIFY_SOURCE=2 conftest.c >&5
configure:8432: $? = 0
configure:8432: result: yes
configure:8697: checking for objdir
configure:8714: result: .libs
configure:8976: checking if gcc supports -fno-rtti -fno-exceptions
configure:8995: gcc -c -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wall -pedantic -Wdate-time -D_FORTIFY_SOURCE=2 -fno-rtti -fno-exceptions conftest.c >&5
cc1: warning: command-line option '-fno-rtti' is valid for C++/D/ObjC++ but not for C
configure:8999: $? = 0
configure:9013: result: no
configure:9377: checking for gcc option to produce PIC
configure:9386: result: -fPIC -DPIC
configure:9394: checking if gcc PIC flag -fPIC -DPIC works
configure:9413: gcc -c -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wall -pedantic -Wdate-time -D_FORTIFY_SOURCE=2 -fPIC -DPIC -DPIC conftest.c >&5
configure:9417: $? = 0
configure:9431: result: yes
configure:9460: checking if gcc static flag -static works
configure:9490: result: yes
configure:9505: checking if gcc supports -c -o file.o
configure:9527: gcc -c -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wall -pedantic -Wdate-time -D_FORTIFY_SOURCE=2 -o out/conftest2.o conftest.c >&5
configure:9531: $? = 0
configure:9554: result: yes
configure:9562: checking if gcc supports -c -o file.o
configure:9611: result: yes
configure:9644: checking whether the gcc linker (/usr/bin/ld) supports shared libraries
configure:10923: result: yes
configure:10960: checking whether -lc should be explicitly linked in
configure:10969: gcc -c -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wall -pedantic -Wdate-time -D_FORTIFY_SOURCE=2 conftest.c >&5
configure:10972: $? = 0
configure:10987: gcc -shared -fPIC -DPIC conftest.o -v -Wl,-soname -Wl,conftest -o conftest 2\>\&1 \| /usr/bin/grep -lc \>/dev/null 2\>\&1
configure:10990: $? = 0
configure:11005: result: no
configure:11165: checking dynamic linker characteristics
configure:11747: gcc -o conftest -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wall -pedantic -Wdate-time -D_FORTIFY_SOURCE=2 -Wl,-z,relro -Wl,-z,now -Wl,--as-needed -Wl,-rpath -Wl,/foo conftest.c >&5
configure:11747: $? = 0
configure:11999: result: GNU/Linux ld.so
configure:12121: checking how to hardcode library paths into programs
configure:12146: result: immediate
configure:12746: checking whether stripping libraries is possible
configure:12755: result: yes
configure:12797: checking if libtool supports shared libraries
configure:12799: result: yes
configure:12802: checking whether to build shared libraries
configure:12827: result: yes
configure:12830: checking whether to build static libraries
configure:12834: result: yes
configure:12872: checking for pcre.h
configure:12872: gcc -c -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wall -pedantic -Wdate-time -D_FORTIFY_SOURCE=2 conftest.c >&5
configure:12872: $? = 0
configure:12872: result: yes
configure:13179: checking for gdbm_open in -lgdbm
configure:13208: gcc -o conftest -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wall -pedantic -Wdate-time -D_FORTIFY_SOURCE=2 -Wl,-z,relro -Wl,-z,now -Wl,--as-needed conftest.c -lgdbm >&5
configure:13208: $? = 0
configure:13220: result: yes
configure:13227: checking for gdbm_open
configure:13227: gcc -o conftest -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wall -pedantic -Wdate-time -D_FORTIFY_SOURCE=2 -Wl,-z,relro -Wl,-z,now -Wl,--as-needed conftest.c -lgdbm >&5
configure:13227: $? = 0
configure:13227: result: yes
configure:13439: checking courier-unicode library and version
configure:13463: gcc -c -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wall -pedantic -Wdate-time -D_FORTIFY_SOURCE=2 conftest.c >&5
configure:13463: $? = 0
configure:13476: result: ok
configure:13709: checking that generated files are newer than configure
configure:13715: result: done
configure:13750: creating ./config.status
## ---------------------- ##
## Running config.status. ##
## ---------------------- ##
This file was extended by maildrop config.status 2.9.3, which was
generated by GNU Autoconf 2.72. Invocation command line was
CONFIG_FILES =
CONFIG_HEADERS =
CONFIG_LINKS =
CONFIG_COMMANDS =
$ ./config.status
on sbuild
config.status:1030: creating Makefile
config.status:1030: creating dbobj.h
config.status:1030: creating dbobj.config
config.status:1030: creating maildrop.spec
config.status:1030: creating maildrop.lpspec
config.status:1030: creating README.html
config.status:1030: creating INSTALL.html
config.status:1202: executing depfiles commands
config.status:1202: executing libtool commands
configure:15787: === configuring in libs/numlib (/<<PKGBUILDDIR>>/libs/numlib)
configure:15848: running /bin/bash ./configure --disable-option-checking '--prefix=/usr' '--with-version=2.9.3' '--with-package=maildrop' '--build=aarch64-linux-gnu' '--includedir=${prefix}/include' '--mandir=${prefix}/share/man' '--infodir=${prefix}/share/info' '--sysconfdir=/etc' '--localstatedir=/var' '--disable-silent-rules' '--libdir=${prefix}/lib/aarch64-linux-gnu' '--libexecdir=${prefix}/lib/aarch64-linux-gnu' '--disable-maintainer-mode' '--disable-dependency-tracking' 'CAT=/bin/cat' '--enable-use-dotlock=1' '--enable-use-flock=1' '--enable-sendmail=/usr/sbin/sendmail' '--enable-maildirquota' '--enable-authlib-tempreject=0' '--with-db=gdbm' '--with-locking-method=fcntl' 'build_alias=aarch64-linux-gnu' 'CFLAGS=-g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wall -pedantic' 'LDFLAGS=-Wl,-z,relro -Wl,-z,now -Wl,--as-needed' 'CPPFLAGS=-Wdate-time -D_FORTIFY_SOURCE=2' --cache-file=/dev/null --srcdir=.
configure:15787: === configuring in libs/liblock (/<<PKGBUILDDIR>>/libs/liblock)
configure:15848: running /bin/bash ./configure --disable-option-checking '--prefix=/usr' '--with-version=2.9.3' '--with-package=maildrop' '--build=aarch64-linux-gnu' '--includedir=${prefix}/include' '--mandir=${prefix}/share/man' '--infodir=${prefix}/share/info' '--sysconfdir=/etc' '--localstatedir=/var' '--disable-silent-rules' '--libdir=${prefix}/lib/aarch64-linux-gnu' '--libexecdir=${prefix}/lib/aarch64-linux-gnu' '--disable-maintainer-mode' '--disable-dependency-tracking' 'CAT=/bin/cat' '--enable-use-dotlock=1' '--enable-use-flock=1' '--enable-sendmail=/usr/sbin/sendmail' '--enable-maildirquota' '--enable-authlib-tempreject=0' '--with-db=gdbm' '--with-locking-method=fcntl' 'build_alias=aarch64-linux-gnu' 'CFLAGS=-g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wall -pedantic' 'LDFLAGS=-Wl,-z,relro -Wl,-z,now -Wl,--as-needed' 'CPPFLAGS=-Wdate-time -D_FORTIFY_SOURCE=2' --cache-file=/dev/null --srcdir=.
configure:15853: error: ./configure failed for libs/liblock
## ---------------- ##
## Cache variables. ##
## ---------------- ##
ac_cv_build=aarch64-unknown-linux-gnu
ac_cv_c_compiler_gnu=yes
ac_cv_env_CC_set=
ac_cv_env_CC_value=
ac_cv_env_CFLAGS_set=set
ac_cv_env_CFLAGS_value='-g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wall -pedantic'
ac_cv_env_CPPFLAGS_set=set
ac_cv_env_CPPFLAGS_value='-Wdate-time -D_FORTIFY_SOURCE=2'
ac_cv_env_LDFLAGS_set=set
ac_cv_env_LDFLAGS_value='-Wl,-z,relro -Wl,-z,now -Wl,--as-needed'
ac_cv_env_LIBS_set=
ac_cv_env_LIBS_value=
ac_cv_env_LT_SYS_LIBRARY_PATH_set=
ac_cv_env_LT_SYS_LIBRARY_PATH_value=
ac_cv_env_build_alias_set=set
ac_cv_env_build_alias_value=aarch64-linux-gnu
ac_cv_env_host_alias_set=
ac_cv_env_host_alias_value=
ac_cv_env_target_alias_set=
ac_cv_env_target_alias_value=
ac_cv_func_gdbm_open=yes
ac_cv_header_dlfcn_h=yes
ac_cv_header_inttypes_h=yes
ac_cv_header_pcre_h=yes
ac_cv_header_stdint_h=yes
ac_cv_header_stdio_h=yes
ac_cv_header_stdlib_h=yes
ac_cv_header_string_h=yes
ac_cv_header_strings_h=yes
ac_cv_header_sys_stat_h=yes
ac_cv_header_sys_types_h=yes
ac_cv_header_unistd_h=yes
ac_cv_host=aarch64-unknown-linux-gnu
ac_cv_lib_gdbm_gdbm_open=yes
ac_cv_objext=o
ac_cv_path_EGREP='/usr/bin/grep -E'
ac_cv_path_EGREP_TRADITIONAL='/usr/bin/grep -E'
ac_cv_path_FGREP='/usr/bin/grep -F'
ac_cv_path_GREP=/usr/bin/grep
ac_cv_path_SED=/usr/bin/sed
ac_cv_path_install='/usr/bin/install -c'
ac_cv_path_lt_DD=/usr/bin/dd
ac_cv_path_mkdir=/usr/bin/mkdir
ac_cv_prog_AWK=mawk
ac_cv_prog_ac_ct_AR=ar
ac_cv_prog_ac_ct_CC=gcc
ac_cv_prog_ac_ct_FILECMD=file
ac_cv_prog_ac_ct_OBJDUMP=objdump
ac_cv_prog_ac_ct_RANLIB=ranlib
ac_cv_prog_ac_ct_STRIP=strip
ac_cv_prog_cc_c11=
ac_cv_prog_cc_g=yes
ac_cv_prog_cc_stdc=
ac_cv_prog_make_make_set=yes
am_cv_CC_dependencies_compiler_type=none
am_cv_make_support_nested_variables=yes
am_cv_prog_cc_c_o=yes
lt_cv_ar_at_file=@
lt_cv_archive_cmds_need_lc=no
lt_cv_deplibs_check_method=pass_all
lt_cv_file_magic_cmd='$MAGIC_CMD'
lt_cv_file_magic_test_file=
lt_cv_ld_reload_flag=-r
lt_cv_nm_interface='BSD nm'
lt_cv_objdir=.libs
lt_cv_path_LD=/usr/bin/ld
lt_cv_path_NM='/usr/bin/nm -B'
lt_cv_path_mainfest_tool=no
lt_cv_prog_compiler_c_o=yes
lt_cv_prog_compiler_pic='-fPIC -DPIC'
lt_cv_prog_compiler_pic_works=yes
lt_cv_prog_compiler_rtti_exceptions=no
lt_cv_prog_compiler_static_works=yes
lt_cv_prog_gnu_ld=yes
lt_cv_sharedlib_from_linklib_cmd='printf %s\n'
lt_cv_shlibpath_overrides_runpath=yes
lt_cv_sys_global_symbol_pipe='/usr/bin/sed -n -e '\''s/^.*[ ]\([ABCDGIRSTW][ABCDGIRSTW]*\)[ ][ ]*\([_A-Za-z][_A-Za-z0-9]*\)$/\1 \2 \2/p'\'' | /usr/bin/sed '\''/ __gnu_lto/d'\'''
lt_cv_sys_global_symbol_to_c_name_address='/usr/bin/sed -n -e '\''s/^: \(.*\) .*$/ {"\1", (void *) 0},/p'\'' -e '\''s/^[ABCDGIRSTW][ABCDGIRSTW]* .* \(.*\)$/ {"\1", (void *) \&\1},/p'\'''
lt_cv_sys_global_symbol_to_c_name_address_lib_prefix='/usr/bin/sed -n -e '\''s/^: \(.*\) .*$/ {"\1", (void *) 0},/p'\'' -e '\''s/^[ABCDGIRSTW][ABCDGIRSTW]* .* \(lib.*\)$/ {"\1", (void *) \&\1},/p'\'' -e '\''s/^[ABCDGIRSTW][ABCDGIRSTW]* .* \(.*\)$/ {"lib\1", (void *) \&\1},/p'\'''
lt_cv_sys_global_symbol_to_cdecl='/usr/bin/sed -n -e '\''s/^T .* \(.*\)$/extern int \1();/p'\'' -e '\''s/^[ABCDGIRSTW][ABCDGIRSTW]* .* \(.*\)$/extern char \1;/p'\'''
lt_cv_sys_global_symbol_to_import=
lt_cv_sys_max_cmd_len=1572864
lt_cv_to_host_file_cmd=func_convert_file_noop
lt_cv_to_tool_file_cmd=func_convert_file_noop
lt_cv_truncate_bin='/usr/bin/dd bs=4096 count=1'
## ----------------- ##
## Output variables. ##
## ----------------- ##
ACLOCAL='${SHELL} '\''/<<PKGBUILDDIR>>/missing'\'' aclocal-1.16'
AMDEPBACKSLASH=''
AMDEP_FALSE=''
AMDEP_TRUE='#'
AMTAR='$${TAR-tar}'
AM_BACKSLASH='\'
AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)'
AM_DEFAULT_VERBOSITY='1'
AM_V='$(V)'
AR='ar'
AUTOCONF='${SHELL} '\''/<<PKGBUILDDIR>>/missing'\'' autoconf'
AUTOHEADER='${SHELL} '\''/<<PKGBUILDDIR>>/missing'\'' autoheader'
AUTOMAKE='${SHELL} '\''/<<PKGBUILDDIR>>/missing'\'' automake-1.16'
AWK='mawk'
CC='gcc'
CCDEPMODE='depmode=none'
CFLAGS='-g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wall -pedantic'
CPPFLAGS='-Wdate-time -D_FORTIFY_SOURCE=2'
CSCOPE='cscope'
CTAGS='ctags'
CYGPATH_W='echo'
DBSUBDIR='libs/gdbmobj'
DEFS='-DPACKAGE_NAME=\"maildrop\" -DPACKAGE_TARNAME=\"maildrop\" -DPACKAGE_VERSION=\"2.9.3\" -DPACKAGE_STRING=\"maildrop\ 2.9.3\" -DPACKAGE_BUGREPORT=\"courier-maildrop@lists.sourceforge.net\" -DPACKAGE_URL=\"\" -DHAVE_STDIO_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_STRINGS_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_UNISTD_H=1 -DSTDC_HEADERS=1 -DHAVE_DLFCN_H=1 -DLT_OBJDIR=\".libs/\" -DETCDIR=\"/etc\"'
DEPDIR='.deps'
DEVEL_FALSE=''
DEVEL_INCLUDES=''
DEVEL_LIBS=''
DEVEL_TRUE='#'
DLLTOOL='false'
DSYMUTIL=''
DUMPBIN=''
ECHO_C=''
ECHO_N='-n'
ECHO_T=''
EGREP='/usr/bin/grep -E'
ETAGS='etags'
EXEEXT=''
FGREP='/usr/bin/grep -F'
FILECMD='file'
GREP='/usr/bin/grep'
HAVE_DBLIBRARY_FALSE='#'
HAVE_DBLIBRARY_TRUE=''
HAVE_SGML_FALSE=''
HAVE_SGML_TRUE='#'
INSTALL_DATA='${INSTALL} -m 644'
INSTALL_PROGRAM='${INSTALL}'
INSTALL_SCRIPT='${INSTALL}'
INSTALL_STRIP_PROGRAM='$(install_sh) -c -s'
LD='/usr/bin/ld'
LDFLAGS='-Wl,-z,relro -Wl,-z,now -Wl,--as-needed'
LIBOBJS=''
LIBS=''
LIBTOOL='$(SHELL) $(top_builddir)/libtool'
LIPO=''
LN_S='ln -s'
LTLIBOBJS=''
LT_SYS_LIBRARY_PATH=''
MAKEINFO='${SHELL} '\''/<<PKGBUILDDIR>>/missing'\'' makeinfo'
MANIFEST_TOOL=':'
MKDIR_P='/usr/bin/mkdir -p'
NM='/usr/bin/nm -B'
NMEDIT=''
OBJDUMP='objdump'
OBJEXT='o'
OTOOL64=''
OTOOL=''
PACKAGE='maildrop'
PACKAGE_BUGREPORT='courier-maildrop@lists.sourceforge.net'
PACKAGE_NAME='maildrop'
PACKAGE_STRING='maildrop 2.9.3'
PACKAGE_TARNAME='maildrop'
PACKAGE_URL=''
PACKAGE_VERSION='2.9.3'
PATH_SEPARATOR=':'
RANLIB='ranlib'
REPOSITORY=''
SED='/usr/bin/sed'
SET_MAKE=''
SHELL='/bin/bash'
STRIP='strip'
USE_DB='0'
USE_GDBM='1'
VERSION='2.9.3'
ac_ct_AR='ar'
ac_ct_CC='gcc'
ac_ct_DUMPBIN=''
am__EXEEXT_FALSE=''
am__EXEEXT_TRUE='#'
am__fastdepCC_FALSE=''
am__fastdepCC_TRUE='#'
am__include='include'
am__isrc=''
am__leading_dot='.'
am__nodep=''
am__quote=''
am__tar='$${TAR-tar} chof - "$$tardir"'
am__untar='$${TAR-tar} xf -'
bindir='${exec_prefix}/bin'
build='aarch64-unknown-linux-gnu'
build_alias='aarch64-linux-gnu'
build_cpu='aarch64'
build_os='linux-gnu'
build_vendor='unknown'
datadir='${datarootdir}'
datarootdir='${prefix}/share'
dblibrary='libs/gdbmobj/libgdbmobj.la'
docdir='${datarootdir}/doc/${PACKAGE_TARNAME}'
dvidir='${docdir}'
exec_prefix='/usr'
host='aarch64-unknown-linux-gnu'
host_alias=''
host_cpu='aarch64'
host_os='linux-gnu'
host_vendor='unknown'
htmldir='${docdir}'
includedir='${prefix}/include'
infodir='${prefix}/share/info'
install_sh='${SHELL} /<<PKGBUILDDIR>>/install-sh'
libdir='/usr/lib/aarch64-linux-gnu'
libexecdir='${prefix}/lib/aarch64-linux-gnu'
localedir='${datarootdir}/locale'
localstatedir='/var'
mandir='${prefix}/share/man'
mkdir_p='$(MKDIR_P)'
oldincludedir='/usr/include'
pdfdir='${docdir}'
prefix='/usr'
program_transform_name='s,x,x,'
psdir='${docdir}'
runstatedir='${localstatedir}/run'
sbindir='${exec_prefix}/sbin'
sharedstatedir='${prefix}/com'
subdirs=' libs/numlib libs/liblock libs/rfc822 libs/rfc2045 libs/gdbmobj libs/bdbobj libs/makedat libs/maildir libs/maildrop'
sysconfdir='/etc'
target_alias=''
withetcdir='/etc'
configure: exit 1
dh_auto_configure: error: ./configure --build=aarch64-linux-gnu --prefix=/usr --includedir=\${prefix}/include --mandir=\${prefix}/share/man --infodir=\${prefix}/share/info --sysconfdir=/etc --localstatedir=/var --disable-option-checking --disable-silent-rules --libdir=\${prefix}/lib/aarch64-linux-gnu --libexecdir=\${prefix}/lib/aarch64-linux-gnu --disable-maintainer-mode --disable-dependency-tracking CAT=/bin/cat --enable-use-dotlock=1 --enable-use-flock=1 --enable-sendmail=/usr/sbin/sendmail --enable-maildirquota --enable-authlib-tempreject=0 --with-db=gdbm --with-locking-method=fcntl returned exit code 1
make[1]: *** [debian/rules:25: override_dh_auto_configure] Error 255
make[1]: Leaving directory '/<<PKGBUILDDIR>>'
make: *** [debian/rules:17: binary] Error 2
dpkg-buildpackage: error: debian/rules binary subprocess returned exit status 2
--------------------------------------------------------------------------------
Build finished at 2024-11-17T11:00:25Z
Finished
--------
+------------------------------------------------------------------------------+
| Cleanup |
+------------------------------------------------------------------------------+
Purging /<<BUILDDIR>>
Not cleaning session: cloned chroot in use
E: Build failure (dpkg-buildpackage died)
+------------------------------------------------------------------------------+
| Summary |
+------------------------------------------------------------------------------+
Build Architecture: arm64
Build Type: binary
Build-Space: 39040
Build-Time: 72
Distribution: sid
Fail-Stage: build
Host Architecture: arm64
Install-Time: 18
Job: /tmp/debusine-fetch-exec-upload-mvi7h4wb/maildrop_2.9.3-2.1.dsc
Machine Architecture: arm64
Package: maildrop
Package-Time: 127
Source-Version: 2.9.3-2.1
Space: 39040
Status: attempted
Version: 2.9.3-2.1
--------------------------------------------------------------------------------
Finished at 2024-11-17T11:00:25Z
Build needed 00:02:07, 39040k disk space