deb_control_files:
- control
- md5sums
deb_fields:
Architecture: amd64
Depends: libc6 (>= 2.14), libftdi1-2 (>= 1.2), libgcc-s1 (>= 3.0), libstdc++6 (>=
5.2), libusb-0.1-4 (>= 2:0.1.12)
Description: |-
JTAG flashing tool for FPGAs, CPLDs and EEPROMs
xc3sprog is a suite of utilities for programming Xilinx FPGAs, CPLDs, and
EEPROMs with the Xilinx Parallel Cable and other JTAG adapters under Linux.
xc3sprog runs as a command-line application.
.
The main features include:
- Reading a .BIT file from Xilinx design tools and programming it into an
FPGA.
- Reading a JEDEC file and programming it into a CPLD.
- Programming a .BIT file into an on-board configuration PROM.
- Programming a binary image into on-board SPI flash memory.
- Reading the contents of a PROM chip back to a file.
- Programming AVR microcontrollers.
.
The functionality of xc3sprog is similar to that of Xilinx IMPACT. There are
also similarities with other free JTAG tools, such as UrJTAG. However,
xc3sprog has a number of advantages:
.
- xc3sprog is free software.
- It is a command-line tool.
- It works on Linux without the need to install binary "cable-drivers".
(Although some types of JTAG cables need to load firmware.)
- It uses an optional configuration file to recognize new JTAG devices.
- It contains programming algorithms for the supported devices, enabling
the direct use of binary files (.BIT / JEDEC) from design tools (as opposed
to intermediate SVF/STAPLE files).
Homepage: http://xc3sprog.sourceforge.net/
Installed-Size: '692'
Maintainer: Ricardo Ribalda Delgado <ricardo@ribalda.com>
Package: xc3sprog
Priority: optional
Section: electronics
Version: 0+svn795+dfsg-4
srcpkg_name: xc3sprog
srcpkg_version: 0+svn795+dfsg-4