sbuild (Debian sbuild) 0.85.11~bpo12+1 (31 August 2024) on debusine-worker-arm64-demeter-09.freexian.com
+==============================================================================+
| nik4 1.7-2+bd1 (arm64) Fri, 01 Nov 2024 17:21:17 +0000 |
+==============================================================================+
Package: nik4
Version: 1.7-2+bd1
Source Version: 1.7-2
Distribution: sid
Machine Architecture: arm64
Host Architecture: arm64
Build Architecture: arm64
Build Type: any
I: No tarballs found in /var/lib/debusine/worker/.cache/sbuild
Unpacking /var/lib/debusine/worker/system-images/894003/system.tar.xz to /tmp/tmp.sbuild.tCQdawa_Hs...
I: NOTICE: Log filtering will replace 'sbuild-unshare-dummy-location' with '<<CHROOT>>'
+------------------------------------------------------------------------------+
| Chroot Setup Commands |
+------------------------------------------------------------------------------+
rm -f /etc/resolv.conf
----------------------
I: Finished running 'rm -f /etc/resolv.conf'.
Finished processing commands.
--------------------------------------------------------------------------------
Copying /tmp/debusine-fetch-exec-upload-scnxj8tl/libpython3-all-dbg_3.12.6-1+debusine1_arm64.deb to /<<CHROOT>>...
Copying /tmp/debusine-fetch-exec-upload-scnxj8tl/libpython3-all-dev_3.12.6-1+debusine1_arm64.deb to /<<CHROOT>>...
Copying /tmp/debusine-fetch-exec-upload-scnxj8tl/libpython3-dbg_3.12.6-1+debusine1_arm64.deb to /<<CHROOT>>...
Copying /tmp/debusine-fetch-exec-upload-scnxj8tl/libpython3-dev_3.12.6-1+debusine1_arm64.deb to /<<CHROOT>>...
Copying /tmp/debusine-fetch-exec-upload-scnxj8tl/libpython3-stdlib_3.12.6-1+debusine1_arm64.deb to /<<CHROOT>>...
Copying /tmp/debusine-fetch-exec-upload-scnxj8tl/python3-all-dbg_3.12.6-1+debusine1_arm64.deb to /<<CHROOT>>...
Copying /tmp/debusine-fetch-exec-upload-scnxj8tl/python3-all-dev_3.12.6-1+debusine1_arm64.deb to /<<CHROOT>>...
Copying /tmp/debusine-fetch-exec-upload-scnxj8tl/python3-all-venv_3.12.6-1+debusine1_arm64.deb to /<<CHROOT>>...
Copying /tmp/debusine-fetch-exec-upload-scnxj8tl/python3-all_3.12.6-1+debusine1_arm64.deb to /<<CHROOT>>...
Copying /tmp/debusine-fetch-exec-upload-scnxj8tl/python3-dbg_3.12.6-1+debusine1_arm64.deb to /<<CHROOT>>...
Copying /tmp/debusine-fetch-exec-upload-scnxj8tl/python3-dev_3.12.6-1+debusine1_arm64.deb to /<<CHROOT>>...
Copying /tmp/debusine-fetch-exec-upload-scnxj8tl/python3-full_3.12.6-1+debusine1_arm64.deb to /<<CHROOT>>...
Copying /tmp/debusine-fetch-exec-upload-scnxj8tl/python3-minimal_3.12.6-1+debusine1_arm64.deb to /<<CHROOT>>...
Copying /tmp/debusine-fetch-exec-upload-scnxj8tl/python3-nopie_3.12.6-1+debusine1_arm64.deb to /<<CHROOT>>...
Copying /tmp/debusine-fetch-exec-upload-scnxj8tl/python3-venv_3.12.6-1+debusine1_arm64.deb to /<<CHROOT>>...
Copying /tmp/debusine-fetch-exec-upload-scnxj8tl/python3_3.12.6-1+debusine1_arm64.deb to /<<CHROOT>>...
Copying /tmp/debusine-fetch-exec-upload-scnxj8tl/2to3_3.12.6-1+debusine1_all.deb to /<<CHROOT>>...
Copying /tmp/debusine-fetch-exec-upload-scnxj8tl/idle_3.12.6-1+debusine1_all.deb to /<<CHROOT>>...
Copying /tmp/debusine-fetch-exec-upload-scnxj8tl/python3-doc_3.12.6-1+debusine1_all.deb to /<<CHROOT>>...
Copying /tmp/debusine-fetch-exec-upload-scnxj8tl/python3-examples_3.12.6-1+debusine1_all.deb to /<<CHROOT>>...
Copying /tmp/debusine-fetch-exec-upload-scnxj8tl/python3-mapnik-dbgsym_0.0~20240222-5ab32f020-2+bd1_arm64.deb to /<<CHROOT>>...
Copying /tmp/debusine-fetch-exec-upload-scnxj8tl/python3-mapnik_0.0~20240222-5ab32f020-2+bd1_arm64.deb to /<<CHROOT>>...
I: NOTICE: Log filtering will replace 'build/nik4-6ZFpry/resolver-mQlUAe' with '<<RESOLVERDIR>>'
+------------------------------------------------------------------------------+
| Update chroot |
+------------------------------------------------------------------------------+
Get:1 file:/build/nik4-6ZFpry/resolver-T44A5T/apt_archive ./ InRelease
Ign:1 file:/build/nik4-6ZFpry/resolver-T44A5T/apt_archive ./ InRelease
Get:2 file:/build/nik4-6ZFpry/resolver-T44A5T/apt_archive ./ Release [609 B]
Get:3 http://deb.debian.org/debian sid InRelease [202 kB]
Get:2 file:/build/nik4-6ZFpry/resolver-T44A5T/apt_archive ./ Release [609 B]
Get:4 file:/build/nik4-6ZFpry/resolver-T44A5T/apt_archive ./ Release.gpg
Ign:4 file:/build/nik4-6ZFpry/resolver-T44A5T/apt_archive ./ Release.gpg
Get:5 file:/build/nik4-6ZFpry/resolver-T44A5T/apt_archive ./ Packages [22.6 kB]
Get:6 http://deb.debian.org/debian sid/main arm64 Packages [9936 kB]
Fetched 10.1 MB in 1s (7544 kB/s)
Reading package lists...
Reading package lists...
Building dependency tree...
Reading state information...
Calculating upgrade...
The following packages will be upgraded:
coreutils dash debianutils diffutils e2fsprogs gpgv grep gzip libacl1
libaudit-common libaudit1 libcap2 libcom-err2 libdebconfclient0
libext2fs2t64 libgmp10 libgnutls30t64 libidn2-0 liblz4-1 libmd0 libseccomp2
libss2 libtasn1-6 logsave
24 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
Need to get 7340 kB of archives.
After this operation, 157 kB of additional disk space will be used.
Get:1 http://deb.debian.org/debian sid/main arm64 coreutils arm64 9.5-1+b1 [2858 kB]
Get:2 http://deb.debian.org/debian sid/main arm64 debianutils arm64 5.20+b1 [89.8 kB]
Get:3 http://deb.debian.org/debian sid/main arm64 dash arm64 0.5.12-9+b1 [91.4 kB]
Get:4 http://deb.debian.org/debian sid/main arm64 diffutils arm64 1:3.10-1+b1 [373 kB]
Get:5 http://deb.debian.org/debian sid/main arm64 grep arm64 3.11-4+b1 [426 kB]
Get:6 http://deb.debian.org/debian sid/main arm64 gzip arm64 1.12-1.1+b1 [131 kB]
Get:7 http://deb.debian.org/debian sid/main arm64 logsave arm64 1.47.1-1+b1 [22.9 kB]
Get:8 http://deb.debian.org/debian sid/main arm64 libext2fs2t64 arm64 1.47.1-1+b1 [203 kB]
Get:9 http://deb.debian.org/debian sid/main arm64 e2fsprogs arm64 1.47.1-1+b1 [560 kB]
Get:10 http://deb.debian.org/debian sid/main arm64 gpgv arm64 2.2.45-2 [199 kB]
Get:11 http://deb.debian.org/debian sid/main arm64 libacl1 arm64 2.3.2-2+b1 [32.2 kB]
Get:12 http://deb.debian.org/debian sid/main arm64 libaudit-common all 1:4.0.1-2 [12.3 kB]
Get:13 http://deb.debian.org/debian sid/main arm64 libaudit1 arm64 1:4.0.1-2 [53.8 kB]
Get:14 http://deb.debian.org/debian sid/main arm64 libcap2 arm64 1:2.66-5+b1 [27.2 kB]
Get:15 http://deb.debian.org/debian sid/main arm64 libdebconfclient0 arm64 0.272+b1 [10.5 kB]
Get:16 http://deb.debian.org/debian sid/main arm64 libgmp10 arm64 2:6.3.0+dfsg-2+b2 [535 kB]
Get:17 http://deb.debian.org/debian sid/main arm64 libidn2-0 arm64 2.3.7-2+b1 [127 kB]
Get:18 http://deb.debian.org/debian sid/main arm64 libtasn1-6 arm64 4.19.0-3+b3 [46.9 kB]
Get:19 http://deb.debian.org/debian sid/main arm64 libgnutls30t64 arm64 3.8.6-2+b1 [1355 kB]
Get:20 http://deb.debian.org/debian sid/main arm64 liblz4-1 arm64 1.9.4-3+b1 [55.8 kB]
Get:21 http://deb.debian.org/debian sid/main arm64 libmd0 arm64 1.1.0-2+b1 [33.7 kB]
Get:22 http://deb.debian.org/debian sid/main arm64 libseccomp2 arm64 2.5.5-1+b2 [46.8 kB]
Get:23 http://deb.debian.org/debian sid/main arm64 libcom-err2 arm64 1.47.1-1+b1 [23.1 kB]
Get:24 http://deb.debian.org/debian sid/main arm64 libss2 arm64 1.47.1-1+b1 [27.5 kB]
debconf: delaying package configuration, since apt-utils is not installed
Fetched 7340 kB in 0s (49.7 MB/s)
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 5123 files and directories currently installed.)
Preparing to unpack .../coreutils_9.5-1+b1_arm64.deb ...
Unpacking coreutils (9.5-1+b1) over (9.5-1) ...
Setting up coreutils (9.5-1+b1) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 5124 files and directories currently installed.)
Preparing to unpack .../debianutils_5.20+b1_arm64.deb ...
Unpacking debianutils (5.20+b1) over (5.20) ...
Setting up debianutils (5.20+b1) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 5125 files and directories currently installed.)
Preparing to unpack .../dash_0.5.12-9+b1_arm64.deb ...
Unpacking dash (0.5.12-9+b1) over (0.5.12-9) ...
Setting up dash (0.5.12-9+b1) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 5126 files and directories currently installed.)
Preparing to unpack .../diffutils_1%3a3.10-1+b1_arm64.deb ...
Unpacking diffutils (1:3.10-1+b1) over (1:3.10-1) ...
Setting up diffutils (1:3.10-1+b1) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 5127 files and directories currently installed.)
Preparing to unpack .../grep_3.11-4+b1_arm64.deb ...
Unpacking grep (3.11-4+b1) over (3.11-4) ...
Setting up grep (3.11-4+b1) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 5128 files and directories currently installed.)
Preparing to unpack .../gzip_1.12-1.1+b1_arm64.deb ...
Unpacking gzip (1.12-1.1+b1) over (1.12-1.1) ...
Setting up gzip (1.12-1.1+b1) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 5129 files and directories currently installed.)
Preparing to unpack .../logsave_1.47.1-1+b1_arm64.deb ...
Unpacking logsave (1.47.1-1+b1) over (1.47.1-1) ...
Preparing to unpack .../libext2fs2t64_1.47.1-1+b1_arm64.deb ...
Leaving 'diversion of /lib/aarch64-linux-gnu/libe2p.so.2 to /lib/aarch64-linux-gnu/libe2p.so.2.usr-is-merged by libext2fs2t64'
Leaving 'diversion of /lib/aarch64-linux-gnu/libe2p.so.2.3 to /lib/aarch64-linux-gnu/libe2p.so.2.3.usr-is-merged by libext2fs2t64'
Leaving 'diversion of /lib/aarch64-linux-gnu/libext2fs.so.2 to /lib/aarch64-linux-gnu/libext2fs.so.2.usr-is-merged by libext2fs2t64'
Leaving 'diversion of /lib/aarch64-linux-gnu/libext2fs.so.2.4 to /lib/aarch64-linux-gnu/libext2fs.so.2.4.usr-is-merged by libext2fs2t64'
Unpacking libext2fs2t64:arm64 (1.47.1-1+b1) over (1.47.1-1) ...
Setting up libext2fs2t64:arm64 (1.47.1-1+b1) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 5131 files and directories currently installed.)
Preparing to unpack .../e2fsprogs_1.47.1-1+b1_arm64.deb ...
Unpacking e2fsprogs (1.47.1-1+b1) over (1.47.1-1) ...
Preparing to unpack .../gpgv_2.2.45-2_arm64.deb ...
Unpacking gpgv (2.2.45-2) over (2.2.45-1) ...
Setting up gpgv (2.2.45-2) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 5132 files and directories currently installed.)
Preparing to unpack .../libacl1_2.3.2-2+b1_arm64.deb ...
Unpacking libacl1:arm64 (2.3.2-2+b1) over (2.3.2-2) ...
Setting up libacl1:arm64 (2.3.2-2+b1) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 5133 files and directories currently installed.)
Preparing to unpack .../libaudit-common_1%3a4.0.1-2_all.deb ...
Unpacking libaudit-common (1:4.0.1-2) over (1:4.0.1-1) ...
Setting up libaudit-common (1:4.0.1-2) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 5133 files and directories currently installed.)
Preparing to unpack .../libaudit1_1%3a4.0.1-2_arm64.deb ...
Unpacking libaudit1:arm64 (1:4.0.1-2) over (1:4.0.1-1) ...
Setting up libaudit1:arm64 (1:4.0.1-2) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 5133 files and directories currently installed.)
Preparing to unpack .../libcap2_1%3a2.66-5+b1_arm64.deb ...
Unpacking libcap2:arm64 (1:2.66-5+b1) over (1:2.66-5) ...
Setting up libcap2:arm64 (1:2.66-5+b1) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 5134 files and directories currently installed.)
Preparing to unpack .../libdebconfclient0_0.272+b1_arm64.deb ...
Unpacking libdebconfclient0:arm64 (0.272+b1) over (0.272) ...
Setting up libdebconfclient0:arm64 (0.272+b1) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 5135 files and directories currently installed.)
Preparing to unpack .../libgmp10_2%3a6.3.0+dfsg-2+b2_arm64.deb ...
Unpacking libgmp10:arm64 (2:6.3.0+dfsg-2+b2) over (2:6.3.0+dfsg-2+b1) ...
Setting up libgmp10:arm64 (2:6.3.0+dfsg-2+b2) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 5135 files and directories currently installed.)
Preparing to unpack .../libidn2-0_2.3.7-2+b1_arm64.deb ...
Unpacking libidn2-0:arm64 (2.3.7-2+b1) over (2.3.7-2) ...
Setting up libidn2-0:arm64 (2.3.7-2+b1) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 5136 files and directories currently installed.)
Preparing to unpack .../libtasn1-6_4.19.0-3+b3_arm64.deb ...
Unpacking libtasn1-6:arm64 (4.19.0-3+b3) over (4.19.0-3+b2) ...
Setting up libtasn1-6:arm64 (4.19.0-3+b3) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 5136 files and directories currently installed.)
Preparing to unpack .../libgnutls30t64_3.8.6-2+b1_arm64.deb ...
Unpacking libgnutls30t64:arm64 (3.8.6-2+b1) over (3.8.6-2) ...
Setting up libgnutls30t64:arm64 (3.8.6-2+b1) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 5137 files and directories currently installed.)
Preparing to unpack .../liblz4-1_1.9.4-3+b1_arm64.deb ...
Unpacking liblz4-1:arm64 (1.9.4-3+b1) over (1.9.4-3) ...
Setting up liblz4-1:arm64 (1.9.4-3+b1) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 5138 files and directories currently installed.)
Preparing to unpack .../libmd0_1.1.0-2+b1_arm64.deb ...
Unpacking libmd0:arm64 (1.1.0-2+b1) over (1.1.0-2) ...
Setting up libmd0:arm64 (1.1.0-2+b1) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 5139 files and directories currently installed.)
Preparing to unpack .../libseccomp2_2.5.5-1+b2_arm64.deb ...
Unpacking libseccomp2:arm64 (2.5.5-1+b2) over (2.5.5-1+b1) ...
Setting up libseccomp2:arm64 (2.5.5-1+b2) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 5139 files and directories currently installed.)
Preparing to unpack .../libcom-err2_1.47.1-1+b1_arm64.deb ...
Unpacking libcom-err2:arm64 (1.47.1-1+b1) over (1.47.1-1) ...
Preparing to unpack .../libss2_1.47.1-1+b1_arm64.deb ...
Unpacking libss2:arm64 (1.47.1-1+b1) over (1.47.1-1) ...
Setting up libcom-err2:arm64 (1.47.1-1+b1) ...
Setting up libss2:arm64 (1.47.1-1+b1) ...
Setting up logsave (1.47.1-1+b1) ...
Setting up e2fsprogs (1.47.1-1+b1) ...
Processing triggers for libc-bin (2.40-3) ...
Processing triggers for debianutils (5.20+b1) ...
+------------------------------------------------------------------------------+
| Fetch source files |
+------------------------------------------------------------------------------+
Local sources
-------------
/tmp/debusine-fetch-exec-upload-scnxj8tl/nik4_1.7-2.dsc exists in /tmp/debusine-fetch-exec-upload-scnxj8tl; copying to chroot
I: NOTICE: Log filtering will replace 'build/nik4-6ZFpry/nik4-1.7' with '<<PKGBUILDDIR>>'
I: NOTICE: Log filtering will replace 'build/nik4-6ZFpry' with '<<BUILDDIR>>'
+------------------------------------------------------------------------------+
| Install package build dependencies |
+------------------------------------------------------------------------------+
Setup apt archive
-----------------
Merged Build-Depends: debhelper-compat (= 12), dh-python, python3-all-dev, python3-mapnik, docbook2x, docbook-xsl, docbook-xml, xsltproc, build-essential, fakeroot, dumb-init
Filtered Build-Depends: debhelper-compat (= 12), dh-python, python3-all-dev, python3-mapnik, docbook2x, docbook-xsl, docbook-xml, xsltproc, build-essential, fakeroot, dumb-init
dpkg-deb: building package 'sbuild-build-depends-main-dummy' in '/<<RESOLVERDIR>>/apt_archive/sbuild-build-depends-main-dummy.deb'.
Ign:1 copy:/<<RESOLVERDIR>>/apt_archive ./ InRelease
Get:2 copy:/<<RESOLVERDIR>>/apt_archive ./ Release [609 B]
Ign:3 copy:/<<RESOLVERDIR>>/apt_archive ./ Release.gpg
Get:4 copy:/<<RESOLVERDIR>>/apt_archive ./ Sources [726 B]
Get:5 copy:/<<RESOLVERDIR>>/apt_archive ./ Packages [751 B]
Fetched 2086 B in 0s (200 kB/s)
Reading package lists...
Get:1 file:/<<BUILDDIR>>/resolver-T44A5T/apt_archive ./ InRelease
Ign:1 file:/<<BUILDDIR>>/resolver-T44A5T/apt_archive ./ InRelease
Get:2 file:/<<BUILDDIR>>/resolver-T44A5T/apt_archive ./ Release [609 B]
Get:2 file:/<<BUILDDIR>>/resolver-T44A5T/apt_archive ./ Release [609 B]
Get:3 file:/<<BUILDDIR>>/resolver-T44A5T/apt_archive ./ Release.gpg
Ign:3 file:/<<BUILDDIR>>/resolver-T44A5T/apt_archive ./ Release.gpg
Reading package lists...
Reading package lists...
Install main build dependencies (apt-based resolver)
----------------------------------------------------
Installing build dependencies
Reading package lists...
Building dependency tree...
Reading state information...
Some packages could not be installed. This may mean that you have
requested an impossible situation or if you are using the unstable
distribution that some required packages have not yet been created
or been moved out of Incoming.
The following information may help to resolve the situation:
The following packages have unmet dependencies:
python3-mapnik : Depends: libboost-python1.83.0-py313 but it is not installable
E: Unable to correct problems, you have held broken packages.
apt-get failed.
E: Package installation failed
Not removing build depends: cloned chroot in use
Setup apt archive
-----------------
Merged Build-Depends: dose-distcheck
Filtered Build-Depends: dose-distcheck
dpkg-deb: building package 'sbuild-build-depends-dose3-dummy' in '/<<RESOLVERDIR>>/apt_archive/sbuild-build-depends-dose3-dummy.deb'.
Ign:1 copy:/<<RESOLVERDIR>>/apt_archive ./ InRelease
Get:2 copy:/<<RESOLVERDIR>>/apt_archive ./ Release [615 B]
Ign:3 copy:/<<RESOLVERDIR>>/apt_archive ./ Release.gpg
Get:4 copy:/<<RESOLVERDIR>>/apt_archive ./ Sources [1305 B]
Get:5 copy:/<<RESOLVERDIR>>/apt_archive ./ Packages [1366 B]
Fetched 3286 B in 0s (310 kB/s)
Reading package lists...
Get:1 file:/<<BUILDDIR>>/resolver-T44A5T/apt_archive ./ InRelease
Ign:1 file:/<<BUILDDIR>>/resolver-T44A5T/apt_archive ./ InRelease
Get:2 file:/<<BUILDDIR>>/resolver-T44A5T/apt_archive ./ Release [609 B]
Get:2 file:/<<BUILDDIR>>/resolver-T44A5T/apt_archive ./ Release [609 B]
Get:3 file:/<<BUILDDIR>>/resolver-T44A5T/apt_archive ./ Release.gpg
Ign:3 file:/<<BUILDDIR>>/resolver-T44A5T/apt_archive ./ Release.gpg
Reading package lists...
Reading package lists...
Install dose3 build dependencies (apt-based resolver)
-----------------------------------------------------
Installing build dependencies
Reading package lists...
Building dependency tree...
Reading state information...
The following additional packages will be installed:
dose-distcheck xz-utils
The following NEW packages will be installed:
dose-distcheck sbuild-build-depends-dose3-dummy xz-utils
0 upgraded, 3 newly installed, 0 to remove and 0 not upgraded.
Need to get 1927 kB of archives.
After this operation, 7465 kB of additional disk space will be used.
Get:1 copy:/<<RESOLVERDIR>>/apt_archive ./ sbuild-build-depends-dose3-dummy 0.invalid.0 [860 B]
Get:2 http://deb.debian.org/debian sid/main arm64 xz-utils arm64 5.6.3-1 [540 kB]
Get:3 http://deb.debian.org/debian sid/main arm64 dose-distcheck arm64 7.0.0-5+b5 [1386 kB]
debconf: delaying package configuration, since apt-utils is not installed
Fetched 1927 kB in 0s (23.5 MB/s)
Selecting previously unselected package xz-utils.
(Reading database ... 5141 files and directories currently installed.)
Preparing to unpack .../xz-utils_5.6.3-1_arm64.deb ...
Unpacking xz-utils (5.6.3-1) ...
Selecting previously unselected package dose-distcheck.
Preparing to unpack .../dose-distcheck_7.0.0-5+b5_arm64.deb ...
Unpacking dose-distcheck (7.0.0-5+b5) ...
Selecting previously unselected package sbuild-build-depends-dose3-dummy.
Preparing to unpack .../sbuild-build-depends-dose3-dummy_0.invalid.0_arm64.deb ...
Unpacking sbuild-build-depends-dose3-dummy (0.invalid.0) ...
Setting up xz-utils (5.6.3-1) ...
update-alternatives: using /usr/bin/xz to provide /usr/bin/lzma (lzma) in auto mode
Setting up dose-distcheck (7.0.0-5+b5) ...
Setting up sbuild-build-depends-dose3-dummy (0.invalid.0) ...
(I)Doseparse: Parsing and normalizing...
(I)Dose_deb: Parsing Packages file -...
(I)Dose_common: total packages 71195
(I)Dose_applications: Cudf Universe: 71195 packages
(I)Dose_applications: --checkonly specified, consider all packages as background packages
(I)Dose_applications: Solving...
output-version: 1.2
native-architecture: arm64
report:
-
package: sbuild-build-depends-main-dummy
version: 0.invalid.0
architecture: arm64
status: ok
installationset:
-
package: zlib1g-dev
version: 1:1.3.dfsg+really1.3.1-1
architecture: arm64
-
package: zlib1g
version: 1:1.3.dfsg+really1.3.1-1
architecture: arm64
-
package: xz-utils
version: 5.6.3-1
architecture: arm64
-
package: xsltproc
version: 1.1.35-1.1
architecture: arm64
-
package: xml-core
version: 0.19
architecture: all
-
package: util-linux
version: 2.40.2-9
architecture: arm64
essential: true
-
package: unixodbc-common
version: 2.3.12-1
architecture: all
-
package: ucf
version: 3.0043+nmu1
architecture: all
-
package: tzdata
version: 2024b-3
architecture: all
-
package: texinfo-lib
version: 7.1.1-1+b1
architecture: arm64
-
package: texinfo
version: 7.1.1-1
architecture: all
-
package: tex-common
version: 6.18
architecture: all
-
package: tar
version: 1.35+dfsg-3
architecture: arm64
essential: true
-
package: sysvinit-utils
version: 3.11-1
architecture: arm64
essential: true
-
package: sgml-data
version: 2.0.11+nmu1
architecture: all
-
package: sgml-base
version: 1.31
architecture: all
-
package: sensible-utils
version: 0.0.24
architecture: all
-
package: sed
version: 4.9-2
architecture: arm64
essential: true
-
package: sbuild-build-depends-main-dummy
version: 0.invalid.0
architecture: arm64
-
package: rpcsvc-proto
version: 1.4.3-1+b1
architecture: arm64
-
package: readline-common
version: 8.2-5
architecture: all
-
package: python3.12-minimal
version: 3.12.7-1
architecture: arm64
-
package: python3.12-dev
version: 3.12.7-1
architecture: arm64
-
package: python3.12
version: 3.12.7-1
architecture: arm64
-
package: python3-zipp
version: 3.20.2-1
architecture: all
-
package: python3-typing-extensions
version: 4.12.2-2
architecture: all
-
package: python3-typeguard
version: 4.4.0-1
architecture: all
-
package: python3-setuptools
version: 75.2.0-1
architecture: all
-
package: python3-pkg-resources
version: 75.2.0-1
architecture: all
-
package: python3-more-itertools
version: 10.5.0-1
architecture: all
-
package: python3-minimal
version: 3.12.6-1
architecture: arm64
-
package: python3-mapnik
version: 1:0.0~20240222-5ab32f020-1+b3
architecture: arm64
-
package: python3-jaraco.text
version: 4.0.0-1
architecture: all
-
package: python3-jaraco.functools
version: 4.1.0-1
architecture: all
-
package: python3-jaraco.context
version: 6.0.0-1
architecture: all
-
package: python3-inflect
version: 7.3.1-2
architecture: all
-
package: python3-dev
version: 3.12.6-1
architecture: arm64
-
package: python3-cairo
version: 1.26.1-2
architecture: arm64
-
package: python3-autocommand
version: 2.2.2-3
architecture: all
-
package: python3-all-dev
version: 3.12.6-1
architecture: arm64
-
package: python3-all
version: 3.12.6-1
architecture: arm64
-
package: python3
version: 3.12.6-1
architecture: arm64
-
package: pseudo
version: 1.9.0+git20230301+ec6151a2b057-1+b1
architecture: arm64
-
package: proj-data
version: 9.5.0-1
architecture: all
-
package: po-debconf
version: 1.0.21+nmu1
architecture: all
-
package: perl-openssl-defaults
version: 7+b2
architecture: arm64
-
package: perl-modules-5.40
version: 5.40.0-6
architecture: all
-
package: perl-base
version: 5.40.0-6
architecture: arm64
essential: true
-
package: perl
version: 5.40.0-6
architecture: arm64
-
package: patch
version: 2.7.6-7+b1
architecture: arm64
-
package: openssl-provider-legacy
version: 3.3.2-2
architecture: arm64
-
package: openssl
version: 3.3.2-2
architecture: arm64
-
package: opensp
version: 1.5.2-15
architecture: arm64
-
package: netbase
version: 6.4
architecture: all
-
package: ncurses-bin
version: 6.5-2
architecture: arm64
essential: true
-
package: ncurses-base
version: 6.5-2
architecture: all
essential: true
-
package: mysql-common
version: 5.8+1.1.1
architecture: all
-
package: media-types
version: 10.1.0
architecture: all
-
package: mariadb-common
version: 1:11.4.3-1
architecture: all
-
package: man-db
version: 2.13.0-1
architecture: arm64
-
package: make-guile
version: 4.3-4.1+b1
architecture: arm64
-
package: m4
version: 1.4.19-4
architecture: arm64
-
package: linux-libc-dev
version: 6.10.9-1
architecture: all
-
package: libzstd1
version: 1.5.6+dfsg-1
architecture: arm64
-
package: libxxhash0
version: 0.8.2-2+b1
architecture: arm64
-
package: libxslt1.1
version: 1.1.35-1.1
architecture: arm64
-
package: libxrender1
version: 1:0.9.10-1.1+b1
architecture: arm64
-
package: libxml2
version: 2.12.7+dfsg+really2.9.14-0.1
architecture: arm64
-
package: libxml-sax-perl
version: 1.02+dfsg-3
architecture: all
-
package: libxml-sax-expat-perl
version: 0.51-2
architecture: all
-
package: libxml-sax-base-perl
version: 1.09-3
architecture: all
-
package: libxml-parser-perl
version: 2.47-1+b3
architecture: arm64
-
package: libxml-namespacesupport-perl
version: 1.12-2
architecture: all
-
package: libxml-libxml-perl
version: 2.0207+dfsg+really+2.0134-5+b1
architecture: arm64
-
package: libxext6
version: 2:1.3.4-1+b2
architecture: arm64
-
package: libxerces-c3.2t64
version: 3.2.4+debian-1.3
architecture: arm64
-
package: libxdmcp6
version: 1:1.1.2-3+b1
architecture: arm64
-
package: libxcb1
version: 1.17.0-2
architecture: arm64
-
package: libxcb-shm0
version: 1.17.0-2
architecture: arm64
-
package: libxcb-render0
version: 1.17.0-2
architecture: arm64
-
package: libxau6
version: 1:1.0.9-1+b1
architecture: arm64
-
package: libx11-data
version: 2:1.8.7-1
architecture: all
-
package: libx11-6
version: 2:1.8.7-1+b1
architecture: arm64
-
package: libwww-robotrules-perl
version: 6.02-1
architecture: all
-
package: libwww-perl
version: 6.77-1
architecture: all
-
package: libwebp7
version: 1.4.0-0.1
architecture: arm64
-
package: libuuid1
version: 2.40.2-9
architecture: arm64
-
package: liburiparser1
version: 0.9.8+dfsg-1
architecture: arm64
-
package: liburi-perl
version: 5.30-1
architecture: all
-
package: libunistring5
version: 1.2-1
architecture: arm64
-
package: libudev1
version: 256.7-2
architecture: arm64
-
package: libuchardet0
version: 0.0.8-1+b1
architecture: arm64
-
package: libubsan1
version: 14.2.0-7
architecture: arm64
-
package: libtsan2
version: 14.2.0-7
architecture: arm64
-
package: libtry-tiny-perl
version: 0.32-1
architecture: all
-
package: libtool
version: 2.4.7-7
architecture: all
-
package: libtirpc3t64
version: 1.3.4+ds-1.3+b1
architecture: arm64
-
package: libtirpc-common
version: 1.3.4+ds-1.3
architecture: all
-
package: libtinfo6
version: 6.5-2
architecture: arm64
-
package: libtimedate-perl
version: 2.3300-2
architecture: all
-
package: libtiff6
version: 4.5.1+git230720-5
architecture: arm64
-
package: libtext-wrapi18n-perl
version: 0.06-10
architecture: all
-
package: libtext-unidecode-perl
version: 1.30-3
architecture: all
-
package: libtext-charwidth-perl
version: 0.04-11+b4
architecture: arm64
-
package: libtasn1-6
version: 4.19.0-3+b3
architecture: arm64
-
package: libsz2
version: 1.1.3-1+b1
architecture: arm64
-
package: libstdc++6
version: 14.2.0-7
architecture: arm64
-
package: libstdc++-14-dev
version: 14.2.0-7
architecture: arm64
-
package: libssl3t64
version: 3.3.2-2
architecture: arm64
-
package: libssh2-1t64
version: 1.11.1-1
architecture: arm64
-
package: libsqlite3-0
version: 3.46.1-1
architecture: arm64
-
package: libspatialite8t64
version: 5.1.0-3+b1
architecture: arm64
-
package: libsnappy1v5
version: 1.2.1-1
architecture: arm64
-
package: libsmartcols1
version: 2.40.2-9
architecture: arm64
-
package: libsigsegv2
version: 2.14-1+b2
architecture: arm64
-
package: libsharpyuv0
version: 1.4.0-0.1
architecture: arm64
-
package: libsframe1
version: 2.43.1-5
architecture: arm64
-
package: libselinux1
version: 3.7-3
architecture: arm64
-
package: libseccomp2
version: 2.5.5-1+b2
architecture: arm64
-
package: libsasl2-modules-db
version: 2.1.28+dfsg1-8
architecture: arm64
-
package: libsasl2-2
version: 2.1.28+dfsg1-8
architecture: arm64
-
package: librttopo1
version: 1.1.0-3+b2
architecture: arm64
-
package: librtmp1
version: 2.4+20151223.gitfa8646d.1-2+b4
architecture: arm64
-
package: libreadline8t64
version: 8.2-5
architecture: arm64
-
package: libqhull-r8.0
version: 2020.2-6+b1
architecture: arm64
-
package: libpython3.12t64
version: 3.12.7-1
architecture: arm64
-
package: libpython3.12-stdlib
version: 3.12.7-1
architecture: arm64
-
package: libpython3.12-minimal
version: 3.12.7-1
architecture: arm64
-
package: libpython3.12-dev
version: 3.12.7-1
architecture: arm64
-
package: libpython3-stdlib
version: 3.12.6-1
architecture: arm64
-
package: libpython3-dev
version: 3.12.6-1
architecture: arm64
-
package: libpython3-all-dev
version: 3.12.6-1
architecture: arm64
-
package: libpsl5t64
version: 0.21.2-1.1+b1
architecture: arm64
-
package: libpseudo
version: 1.9.0+git20230301+ec6151a2b057-1+b1
architecture: arm64
-
package: libproj25
version: 9.5.0-1
architecture: arm64
-
package: libpq5
version: 17.0-1+b2
architecture: arm64
-
package: libpoppler140
version: 24.08.0-3
architecture: arm64
-
package: libpng16-16t64
version: 1.6.44-2
architecture: arm64
-
package: libpixman-1-0
version: 0.42.2-1+b1
architecture: arm64
-
package: libpipeline1
version: 1.5.8-1
architecture: arm64
-
package: libperl5.40
version: 5.40.0-6
architecture: arm64
-
package: libpcre2-8-0
version: 10.42-4+b1
architecture: arm64
-
package: libpam0g
version: 1.5.3-7
architecture: arm64
-
package: libpam-runtime
version: 1.5.3-7
architecture: all
-
package: libpam-modules-bin
version: 1.5.3-7
architecture: arm64
-
package: libpam-modules
version: 1.5.3-7
architecture: arm64
-
package: libp11-kit0
version: 0.25.5-2
architecture: arm64
-
package: libosp5
version: 1.5.2-15
architecture: arm64
-
package: libopenjp2-7
version: 2.5.0-2+b3
architecture: arm64
-
package: libogdi4.1
version: 4.1.1+ds-5
architecture: arm64
-
package: libodbcinst2
version: 2.3.12-1+b2
architecture: arm64
-
package: libodbc2
version: 2.3.12-1+b2
architecture: arm64
-
package: libnss3
version: 2:3.105-2
architecture: arm64
-
package: libnspr4
version: 2:4.35-1.1+b1
architecture: arm64
-
package: libnsl2
version: 1.3.0-3+b3
architecture: arm64
-
package: libngtcp2-crypto-gnutls8
version: 1.6.0-1
architecture: arm64
-
package: libngtcp2-16
version: 1.6.0-1
architecture: arm64
-
package: libnghttp3-9
version: 1.4.0-1
architecture: arm64
-
package: libnghttp2-14
version: 1.64.0-1
architecture: arm64
-
package: libnettle8t64
version: 3.10-1
architecture: arm64
-
package: libnetcdf19t64
version: 1:4.9.2-7
architecture: arm64
-
package: libnet-ssleay-perl
version: 1.94-2
architecture: arm64
-
package: libnet-http-perl
version: 6.23-1
architecture: all
-
package: libncursesw6
version: 6.5-2
architecture: arm64
-
package: libmpfr6
version: 4.2.1-1+b1
architecture: arm64
-
package: libmpc3
version: 1.3.1-1+b2
architecture: arm64
-
package: libmount1
version: 2.40.2-9
architecture: arm64
-
package: libminizip1t64
version: 1:1.3.dfsg+really1.3.1-1
architecture: arm64
-
package: libmd0
version: 1.1.0-2+b1
architecture: arm64
-
package: libmariadb3
version: 1:11.4.3-1
architecture: arm64
-
package: libmapnik4.0
version: 4.0.3+ds-1
architecture: arm64
-
package: libmagic1t64
version: 1:5.45-3+b1
architecture: arm64
-
package: libmagic-mgc
version: 1:5.45-3+b1
architecture: arm64
-
package: liblzma5
version: 5.6.3-1
architecture: arm64
-
package: liblz4-1
version: 1.9.4-3+b1
architecture: arm64
-
package: liblwp-protocol-https-perl
version: 6.14-1
architecture: all
-
package: liblwp-mediatypes-perl
version: 6.04-2
architecture: all
-
package: libltdl7
version: 2.4.7-7+b2
architecture: arm64
-
package: liblsan0
version: 14.2.0-7
architecture: arm64
-
package: liblerc4
version: 4.0.0+ds-4+b2
architecture: arm64
-
package: libldap-2.5-0
version: 2.5.18+dfsg-3+b1
architecture: arm64
-
package: liblcms2-2
version: 2.16-2
architecture: arm64
-
package: libkrb5support0
version: 1.21.3-3
architecture: arm64
-
package: libkrb5-3
version: 1.21.3-3
architecture: arm64
-
package: libkmlengine1t64
version: 1.3.0-12+b1
architecture: arm64
-
package: libkmldom1t64
version: 1.3.0-12+b1
architecture: arm64
-
package: libkmlbase1t64
version: 1.3.0-12+b1
architecture: arm64
-
package: libkeyutils1
version: 1.6.3-4
architecture: arm64
-
package: libk5crypto3
version: 1.21.3-3
architecture: arm64
-
package: libjson-c5
version: 0.18+ds-1
architecture: arm64
-
package: libjs-underscore
version: 1.13.4~dfsg+~1.11.4-3
architecture: all
-
package: libjs-sphinxdoc
version: 7.4.7-4
architecture: all
-
package: libjs-jquery
version: 3.6.1+dfsg+~3.5.14-1
architecture: all
-
package: libjpeg62-turbo
version: 1:2.1.5-3+b1
architecture: arm64
-
package: libjbig0
version: 2.1-6.1+b2
architecture: arm64
-
package: libjansson4
version: 2.14-2+b3
architecture: arm64
-
package: libitm1
version: 14.2.0-7
architecture: arm64
-
package: libisl23
version: 0.27-1
architecture: arm64
-
package: libio-socket-ssl-perl
version: 2.089-1
architecture: all
-
package: libio-html-perl
version: 1.004-3
architecture: all
-
package: libidn2-0
version: 2.3.7-2+b1
architecture: arm64
-
package: libicu72
version: 72.1-5+b1
architecture: arm64
-
package: libhwasan0
version: 14.2.0-7
architecture: arm64
-
package: libhttp-negotiate-perl
version: 6.01-2
architecture: all
-
package: libhttp-message-perl
version: 7.00-2
architecture: all
-
package: libhttp-date-perl
version: 6.06-1
architecture: all
-
package: libhttp-cookies-perl
version: 6.11-1
architecture: all
-
package: libhtml-tree-perl
version: 5.07-3
architecture: all
-
package: libhtml-tagset-perl
version: 3.24-1
architecture: all
-
package: libhtml-parser-perl
version: 3.83-1+b1
architecture: arm64
-
package: libhogweed6t64
version: 3.10-1
architecture: arm64
-
package: libheif1
version: 1.18.2-2
architecture: arm64
-
package: libheif-plugin-libde265
version: 1.18.2-2
architecture: arm64
-
package: libheif-plugin-aomdec
version: 1.18.2-2
architecture: arm64
-
package: libhdf5-hl-100t64
version: 1.10.10+repack-4
architecture: arm64
-
package: libhdf5-103-1t64
version: 1.10.10+repack-4
architecture: arm64
-
package: libhdf4-0-alt
version: 4.3.0-1+b1
architecture: arm64
-
package: libharfbuzz0b
version: 10.0.1-1
architecture: arm64
-
package: libgssapi-krb5-2
version: 1.21.3-3
architecture: arm64
-
package: libgraphite2-3
version: 1.3.14-2+b1
architecture: arm64
-
package: libgprofng0
version: 2.43.1-5
architecture: arm64
-
package: libgpgmepp6t64
version: 1.23.2-5
architecture: arm64
-
package: libgpgme11t64
version: 1.23.2-5
architecture: arm64
-
package: libgpg-error0
version: 1.50-4
architecture: arm64
-
package: libgomp1
version: 14.2.0-7
architecture: arm64
-
package: libgnutls30t64
version: 3.8.6-2+b1
architecture: arm64
-
package: libgmp10
version: 2:6.3.0+dfsg-2+b2
architecture: arm64
-
package: libglib2.0-0t64
version: 2.82.2-2
architecture: arm64
-
package: libgif7
version: 5.2.2-1+b1
architecture: arm64
-
package: libgfortran5
version: 14.2.0-7
architecture: arm64
-
package: libgeotiff5
version: 1.7.3-1+b1
architecture: arm64
-
package: libgeos3.13.0
version: 3.13.0-1
architecture: arm64
-
package: libgeos-c1t64
version: 3.13.0-1
architecture: arm64
-
package: libgdbm6t64
version: 1.24-2
architecture: arm64
-
package: libgdbm-compat4t64
version: 1.24-2
architecture: arm64
-
package: libgdal35
version: 3.9.3+dfsg-1
architecture: arm64
-
package: libgcrypt20
version: 1.11.0-6
architecture: arm64
-
package: libgcc-s1
version: 14.2.0-7
architecture: arm64
-
package: libgcc-14-dev
version: 14.2.0-7
architecture: arm64
-
package: libgc1
version: 1:8.2.8-1
architecture: arm64
-
package: libfyba0t64
version: 4.1.1-11+b1
architecture: arm64
-
package: libfreexl1
version: 2.0.0-1+b3
architecture: arm64
-
package: libfreetype6
version: 2.13.3+dfsg-1
architecture: arm64
-
package: libfontconfig1
version: 2.15.0-1.1+b1
architecture: arm64
-
package: libfile-stripnondeterminism-perl
version: 1.14.0-1
architecture: all
-
package: libfile-listing-perl
version: 6.16-1
architecture: all
-
package: libffi8
version: 3.4.6-1
architecture: arm64
-
package: libexpat1-dev
version: 2.6.3-2
architecture: arm64
-
package: libexpat1
version: 2.6.3-2
architecture: arm64
-
package: libencode-locale-perl
version: 1.05-3
architecture: all
-
package: libelogind0
version: 255.5-1debian3
architecture: arm64
-
package: libelf1t64
version: 0.192-4
architecture: arm64
-
package: libdpkg-perl
version: 1.22.11
architecture: all
-
package: libdeflate0
version: 1.22-1
architecture: arm64
-
package: libdebhelper-perl
version: 13.20
architecture: all
-
package: libdebconfclient0
version: 0.272+b1
architecture: arm64
-
package: libde265-0
version: 1.0.15-1+b2
architecture: arm64
-
package: libdb5.3t64
version: 5.3.28+dfsg2-9
architecture: arm64
-
package: libcurl4t64
version: 8.10.1-2
architecture: arm64
-
package: libcurl3t64-gnutls
version: 8.10.1-2
architecture: arm64
-
package: libctf0
version: 2.43.1-5
architecture: arm64
-
package: libctf-nobfd0
version: 2.43.1-5
architecture: arm64
-
package: libcrypt1
version: 1:4.4.36-5
architecture: arm64
-
package: libcrypt-dev
version: 1:4.4.36-5
architecture: arm64
-
package: libcom-err2
version: 1.47.1-1+b1
architecture: arm64
-
package: libclone-perl
version: 0.47-1+b1
architecture: arm64
-
package: libcfitsio10t64
version: 4.5.0-5
architecture: arm64
-
package: libcc1-0
version: 14.2.0-7
architecture: arm64
-
package: libcap2
version: 1:2.66-5+b1
architecture: arm64
-
package: libcap-ng0
version: 0.8.5-3
architecture: arm64
-
package: libcairo2
version: 1.18.2-2
architecture: arm64
-
package: libc6-dev
version: 2.40-3
architecture: arm64
-
package: libc6
version: 2.40-3
architecture: arm64
-
package: libc-dev-bin
version: 2.40-3
architecture: arm64
-
package: libc-bin
version: 2.40-3
architecture: arm64
essential: true
-
package: libbz2-1.0
version: 1.0.8-6
architecture: arm64
-
package: libbsd0
version: 0.12.2-2
architecture: arm64
-
package: libbrotli1
version: 1.1.0-2+b5
architecture: arm64
-
package: libboost-thread1.83.0
version: 1.83.0-3.2
architecture: arm64
-
package: libboost-python1.83.0
version: 1.83.0-3.2
architecture: arm64
-
package: libblosc1
version: 1.21.5+ds-1+b2
architecture: arm64
-
package: libblkid1
version: 2.40.2-9
architecture: arm64
-
package: libbinutils
version: 2.43.1-5
architecture: arm64
-
package: libaudit1
version: 1:4.0.1-2
architecture: arm64
-
package: libaudit-common
version: 1:4.0.1-2
architecture: all
-
package: libattr1
version: 1:2.5.2-2
architecture: arm64
-
package: libatomic1
version: 14.2.0-7
architecture: arm64
-
package: libatlas3-base
version: 3.10.3-14
architecture: arm64
-
package: libassuan9
version: 3.0.1-2
architecture: arm64
-
package: libasan8
version: 14.2.0-7
architecture: arm64
-
package: libarpack2t64
version: 3.9.1-1.1+b2
architecture: arm64
-
package: libarmadillo14
version: 1:14.0.1+dfsg-2+b1
architecture: arm64
-
package: libarchive-zip-perl
version: 1.68-1
architecture: all
-
package: libaom3
version: 3.10.0-1
architecture: arm64
-
package: libaec0
version: 1.1.3-1+b1
architecture: arm64
-
package: libacl1
version: 2.3.2-2+b1
architecture: arm64
-
package: intltool-debian
version: 0.35.0+20060710.6
architecture: all
-
package: init-system-helpers
version: 1.67
architecture: all
essential: true
-
package: hostname
version: 3.25
architecture: arm64
essential: true
-
package: gzip
version: 1.12-1.1+b1
architecture: arm64
essential: true
-
package: guile-3.0-libs
version: 3.0.10+really3.0.9-1
architecture: arm64
-
package: groff-base
version: 1.23.0-5
architecture: arm64
-
package: grep
version: 3.11-4+b1
architecture: arm64
essential: true
-
package: gpg-sq
version: 0.11.2-4
architecture: arm64
-
package: gpg-from-sq
version: 0.11.2-4
architecture: all
-
package: gettext-base
version: 0.22.5-2
architecture: arm64
-
package: gettext
version: 0.22.5-2
architecture: arm64
-
package: gdal-plugins
version: 3.9.3+dfsg-1
architecture: arm64
-
package: gdal-data
version: 3.9.3+dfsg-1
architecture: all
-
package: gcc-aarch64-linux-gnu
version: 4:14.2.0-1
architecture: arm64
-
package: gcc-14-base
version: 14.2.0-7
architecture: arm64
-
package: gcc-14-aarch64-linux-gnu
version: 14.2.0-7
architecture: arm64
-
package: gcc-14
version: 14.2.0-7
architecture: arm64
-
package: gcc
version: 4:14.2.0-1
architecture: arm64
-
package: gawk
version: 1:5.2.1-2+b2
architecture: arm64
-
package: g++-aarch64-linux-gnu
version: 4:14.2.0-1
architecture: arm64
-
package: g++-14-aarch64-linux-gnu
version: 14.2.0-7
architecture: arm64
-
package: g++-14
version: 14.2.0-7
architecture: arm64
-
package: g++
version: 4:14.2.0-1
architecture: arm64
-
package: fonts-dejavu-mono
version: 2.37-8
architecture: all
-
package: fonts-dejavu-extra
version: 2.37-8
architecture: all
-
package: fonts-dejavu-core
version: 2.37-8
architecture: all
-
package: fonts-dejavu
version: 2.37-8
architecture: all
-
package: fontconfig-config
version: 2.15.0-1.1+b1
architecture: arm64
-
package: findutils
version: 4.10.0-3
architecture: arm64
essential: true
-
package: file
version: 1:5.45-3+b1
architecture: arm64
-
package: dwz
version: 0.15-1+b1
architecture: arm64
-
package: dumb-init
version: 1.2.5-3
architecture: arm64
-
package: dpkg-dev
version: 1.22.11
architecture: all
-
package: dpkg
version: 1.22.11
architecture: arm64
essential: true
-
package: docbook2x
version: 0.8.8-18+b1
architecture: arm64
-
package: docbook-xsl
version: 1.79.2+dfsg-7
architecture: all
-
package: docbook-xml
version: 4.5-13
architecture: all
-
package: diffutils
version: 1:3.10-1+b1
architecture: arm64
essential: true
-
package: dh-strip-nondeterminism
version: 1.14.0-1
architecture: all
-
package: dh-python
version: 6.20241024
architecture: all
-
package: dh-autoreconf
version: 20
architecture: all
-
package: debianutils
version: 5.20+b1
architecture: arm64
essential: true
-
package: debhelper
version: 13.20
architecture: all
-
package: debconf
version: 1.5.87
architecture: all
-
package: dash
version: 0.5.12-9+b1
architecture: arm64
essential: true
-
package: cpp-aarch64-linux-gnu
version: 4:14.2.0-1
architecture: arm64
-
package: cpp-14-aarch64-linux-gnu
version: 14.2.0-7
architecture: arm64
-
package: cpp-14
version: 14.2.0-7
architecture: arm64
-
package: cpp
version: 4:14.2.0-1
architecture: arm64
-
package: coreutils
version: 9.5-1+b1
architecture: arm64
essential: true
-
package: ca-certificates
version: 20240203
architecture: all
-
package: bzip2
version: 1.0.8-6
architecture: arm64
-
package: build-essential
version: 12.12
architecture: arm64
-
package: bsdutils
version: 1:2.40.2-9
architecture: arm64
essential: true
-
package: bsdextrautils
version: 2.40.2-9
architecture: arm64
-
package: binutils-common
version: 2.43.1-5
architecture: arm64
-
package: binutils-aarch64-linux-gnu
version: 2.43.1-5
architecture: arm64
-
package: binutils
version: 2.43.1-5
architecture: arm64
-
package: bash
version: 5.2.32-1+b2
architecture: arm64
essential: true
-
package: base-passwd
version: 3.6.5
architecture: arm64
essential: true
-
package: base-files
version: 13.5
architecture: arm64
essential: true
-
package: autotools-dev
version: 20220109.1
architecture: all
-
package: autopoint
version: 0.22.5-2
architecture: all
-
package: automake
version: 1:1.16.5-1.3
architecture: all
-
package: autoconf
version: 2.72-3
architecture: all
background-packages: 71194
foreground-packages: 1
total-packages: 71195
broken-packages: 0
+------------------------------------------------------------------------------+
| Cleanup |
+------------------------------------------------------------------------------+
Purging /<<BUILDDIR>>
Not cleaning session: cloned chroot in use
E: Package build dependencies not satisfied; skipping
+------------------------------------------------------------------------------+
| Summary |
+------------------------------------------------------------------------------+
Build Architecture: arm64
Build Type: any
Build-Space: n/a
Build-Time: 0
Distribution: sid
Fail-Stage: install-deps
Host Architecture: arm64
Install-Time: 0
Job: /tmp/debusine-fetch-exec-upload-scnxj8tl/nik4_1.7-2.dsc
Machine Architecture: arm64
Package: nik4
Package-Time: 0
Source-Version: 1.7-2
Space: n/a
Status: given-back
Version: 1.7-2+bd1
--------------------------------------------------------------------------------
Finished at 2024-11-01T17:21:17Z
Build needed 00:00:00, no disk space