sbuild (Debian sbuild) 0.86.3~bpo12+1 (03 November 2024) on debusine-worker-arm64-demeter-07.freexian.com
+==============================================================================+
| haskell-lumberjack 1.0.3.0-2 (arm64) Sat, 16 Nov 2024 13:52:54 +0000 |
+==============================================================================+
Package: haskell-lumberjack
Version: 1.0.3.0-2
Source Version: 1.0.3.0-2
Distribution: sid
Machine Architecture: arm64
Host Architecture: arm64
Build Architecture: arm64
Build Type: binary
I: No tarballs found in /var/lib/debusine/worker/.cache/sbuild
Unpacking /var/lib/debusine/worker/system-images/957781/system.tar.xz to /tmp/tmp.sbuild.b4gDWHZ9sV...
I: NOTICE: Log filtering will replace 'sbuild-unshare-dummy-location' with '<<CHROOT>>'
+------------------------------------------------------------------------------+
| Chroot Setup Commands |
+------------------------------------------------------------------------------+
rm -f /etc/resolv.conf
----------------------
I: Finished running 'rm -f /etc/resolv.conf'.
Finished processing commands.
--------------------------------------------------------------------------------
Copying /tmp/debusine-fetch-exec-upload-gnuzj6un/dpkg-dbgsym_1.22.12~1.gbp82cafd_arm64.deb to /<<CHROOT>>...
Copying /tmp/debusine-fetch-exec-upload-gnuzj6un/dpkg_1.22.12~1.gbp82cafd_arm64.deb to /<<CHROOT>>...
Copying /tmp/debusine-fetch-exec-upload-gnuzj6un/dselect-dbgsym_1.22.12~1.gbp82cafd_arm64.deb to /<<CHROOT>>...
Copying /tmp/debusine-fetch-exec-upload-gnuzj6un/dselect_1.22.12~1.gbp82cafd_arm64.deb to /<<CHROOT>>...
Copying /tmp/debusine-fetch-exec-upload-gnuzj6un/libdpkg-dev_1.22.12~1.gbp82cafd_arm64.deb to /<<CHROOT>>...
Copying /tmp/debusine-fetch-exec-upload-gnuzj6un/dpkg-dev_1.22.12~1.gbp82cafd_all.deb to /<<CHROOT>>...
Copying /tmp/debusine-fetch-exec-upload-gnuzj6un/libdpkg-perl_1.22.12~1.gbp82cafd_all.deb to /<<CHROOT>>...
I: NOTICE: Log filtering will replace 'build/haskell-lumberjack-umSBNx/resolver-9ohS6O' with '<<RESOLVERDIR>>'
+------------------------------------------------------------------------------+
| Update chroot |
+------------------------------------------------------------------------------+
Get:1 file:/build/haskell-lumberjack-umSBNx/resolver-pfkbSw/apt_archive ./ InRelease
Ign:1 file:/build/haskell-lumberjack-umSBNx/resolver-pfkbSw/apt_archive ./ InRelease
Get:2 file:/build/haskell-lumberjack-umSBNx/resolver-pfkbSw/apt_archive ./ Release [606 B]
Get:2 file:/build/haskell-lumberjack-umSBNx/resolver-pfkbSw/apt_archive ./ Release [606 B]
Get:3 http://deb.debian.org/debian sid InRelease [202 kB]
Get:4 file:/build/haskell-lumberjack-umSBNx/resolver-pfkbSw/apt_archive ./ Release.gpg
Ign:4 file:/build/haskell-lumberjack-umSBNx/resolver-pfkbSw/apt_archive ./ Release.gpg
Get:5 file:/build/haskell-lumberjack-umSBNx/resolver-pfkbSw/apt_archive ./ Packages [9246 B]
Get:6 http://deb.debian.org/debian sid/main arm64 Packages [9950 kB]
Get:7 http://deb.debian.org/debian sid/main arm64 Components [4908 kB]
Fetched 15.1 MB in 2s (6269 kB/s)
Reading package lists...
Reading package lists...
Building dependency tree...
Reading state information...
Calculating upgrade...
The following packages will be upgraded:
apt bsdextrautils bsdutils debianutils dpkg dpkg-dev libapt-pkg6.0t64
libaudit-common libaudit1 libblkid1 libbrotli1 libcap-ng0 libdpkg-perl
libglib2.0-0t64 libmarkdown2 libmount1 libpcre2-8-0 libseccomp2 libselinux1
libsemanage2 libsmartcols1 libuuid1 libxml2 login login.defs mount passwd
util-linux
28 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
Need to get 8719 kB/12.2 MB of archives.
After this operation, 603 kB disk space will be freed.
Get:1 file:/build/haskell-lumberjack-umSBNx/resolver-pfkbSw/apt_archive ./ dpkg 1.22.12~1.gbp82cafd [1513 kB]
Get:2 http://deb.debian.org/debian sid/main arm64 bsdutils arm64 1:2.40.2-11 [104 kB]
Get:3 file:/build/haskell-lumberjack-umSBNx/resolver-pfkbSw/apt_archive ./ dpkg-dev 1.22.12~1.gbp82cafd [1337 kB]
Get:4 http://deb.debian.org/debian sid/main arm64 debianutils arm64 5.21 [92.1 kB]
Get:5 file:/build/haskell-lumberjack-umSBNx/resolver-pfkbSw/apt_archive ./ libdpkg-perl 1.22.12~1.gbp82cafd [647 kB]
Get:6 http://deb.debian.org/debian sid/main arm64 libapt-pkg6.0t64 arm64 2.9.11 [921 kB]
Get:7 http://deb.debian.org/debian sid/main arm64 bsdextrautils arm64 2.40.2-11 [91.2 kB]
Get:8 http://deb.debian.org/debian sid/main arm64 libblkid1 arm64 2.40.2-11 [162 kB]
Get:9 http://deb.debian.org/debian sid/main arm64 libmount1 arm64 2.40.2-11 [190 kB]
Get:10 http://deb.debian.org/debian sid/main arm64 libsmartcols1 arm64 2.40.2-11 [135 kB]
Get:11 http://deb.debian.org/debian sid/main arm64 mount arm64 2.40.2-11 [153 kB]
Get:12 http://deb.debian.org/debian sid/main arm64 libuuid1 arm64 2.40.2-11 [35.7 kB]
Get:13 http://deb.debian.org/debian sid/main arm64 util-linux arm64 2.40.2-11 [1170 kB]
Get:14 http://deb.debian.org/debian sid/main arm64 libpcre2-8-0 arm64 10.44-4 [243 kB]
Get:15 http://deb.debian.org/debian sid/main arm64 libselinux1 arm64 3.7-3+b1 [72.1 kB]
Get:16 http://deb.debian.org/debian sid/main arm64 libseccomp2 arm64 2.5.5-1+b3 [46.8 kB]
Get:17 http://deb.debian.org/debian sid/main arm64 apt arm64 2.9.11 [1287 kB]
Get:18 http://deb.debian.org/debian sid/main arm64 libaudit-common all 1:4.0.2-2 [12.7 kB]
Get:19 http://deb.debian.org/debian sid/main arm64 libcap-ng0 arm64 0.8.5-3+b1 [17.0 kB]
Get:20 http://deb.debian.org/debian sid/main arm64 libaudit1 arm64 1:4.0.2-2 [54.2 kB]
Get:21 http://deb.debian.org/debian sid/main arm64 login arm64 1:4.16.0-2+really2.40.2-11 [80.0 kB]
Get:22 http://deb.debian.org/debian sid/main arm64 login.defs all 1:4.16.0-5 [185 kB]
Get:23 http://deb.debian.org/debian sid/main arm64 libsemanage2 arm64 3.7-2+b1 [84.5 kB]
Get:24 http://deb.debian.org/debian sid/main arm64 passwd arm64 1:4.16.0-5 [1210 kB]
Get:25 http://deb.debian.org/debian sid/main arm64 libbrotli1 arm64 1.1.0-2+b6 [297 kB]
Get:26 http://deb.debian.org/debian sid/main arm64 libglib2.0-0t64 arm64 2.82.2-3 [1411 kB]
Get:27 http://deb.debian.org/debian sid/main arm64 libmarkdown2 arm64 2.2.7-2.1 [33.1 kB]
Get:28 http://deb.debian.org/debian sid/main arm64 libxml2 arm64 2.12.7+dfsg+really2.9.14-0.2+b1 [630 kB]
debconf: delaying package configuration, since apt-utils is not installed
Fetched 8719 kB in 0s (57.1 MB/s)
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 17129 files and directories currently installed.)
Preparing to unpack .../bsdutils_1%3a2.40.2-11_arm64.deb ...
Unpacking bsdutils (1:2.40.2-11) over (1:2.40.2-10) ...
Setting up bsdutils (1:2.40.2-11) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 17129 files and directories currently installed.)
Preparing to unpack .../debianutils_5.21_arm64.deb ...
Unpacking debianutils (5.21) over (5.20+b1) ...
Setting up debianutils (5.21) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 17128 files and directories currently installed.)
Preparing to unpack .../libapt-pkg6.0t64_2.9.11_arm64.deb ...
Unpacking libapt-pkg6.0t64:arm64 (2.9.11) over (2.9.10) ...
Setting up libapt-pkg6.0t64:arm64 (2.9.11) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 17128 files and directories currently installed.)
Preparing to unpack .../dpkg_1.22.12~1.gbp82cafd_arm64.deb ...
Unpacking dpkg (1.22.12~1.gbp82cafd) over (1.22.11) ...
Setting up dpkg (1.22.12~1.gbp82cafd) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 17127 files and directories currently installed.)
Preparing to unpack .../bsdextrautils_2.40.2-11_arm64.deb ...
Unpacking bsdextrautils (2.40.2-11) over (2.40.2-10) ...
Preparing to unpack .../libblkid1_2.40.2-11_arm64.deb ...
Unpacking libblkid1:arm64 (2.40.2-11) over (2.40.2-10) ...
Setting up libblkid1:arm64 (2.40.2-11) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 17123 files and directories currently installed.)
Preparing to unpack .../libmount1_2.40.2-11_arm64.deb ...
Unpacking libmount1:arm64 (2.40.2-11) over (2.40.2-10) ...
Setting up libmount1:arm64 (2.40.2-11) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 17123 files and directories currently installed.)
Preparing to unpack .../libsmartcols1_2.40.2-11_arm64.deb ...
Unpacking libsmartcols1:arm64 (2.40.2-11) over (2.40.2-10) ...
Setting up libsmartcols1:arm64 (2.40.2-11) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 17123 files and directories currently installed.)
Preparing to unpack .../mount_2.40.2-11_arm64.deb ...
Unpacking mount (2.40.2-11) over (2.40.2-10) ...
Preparing to unpack .../libuuid1_2.40.2-11_arm64.deb ...
Unpacking libuuid1:arm64 (2.40.2-11) over (2.40.2-10) ...
Setting up libuuid1:arm64 (2.40.2-11) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 17123 files and directories currently installed.)
Preparing to unpack .../util-linux_2.40.2-11_arm64.deb ...
Unpacking util-linux (2.40.2-11) over (2.40.2-10) ...
Setting up util-linux (2.40.2-11) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 17120 files and directories currently installed.)
Preparing to unpack .../libpcre2-8-0_10.44-4_arm64.deb ...
Unpacking libpcre2-8-0:arm64 (10.44-4) over (10.42-4+b2) ...
Setting up libpcre2-8-0:arm64 (10.44-4) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 17119 files and directories currently installed.)
Preparing to unpack .../libselinux1_3.7-3+b1_arm64.deb ...
Unpacking libselinux1:arm64 (3.7-3+b1) over (3.7-3) ...
Setting up libselinux1:arm64 (3.7-3+b1) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 17120 files and directories currently installed.)
Preparing to unpack .../libseccomp2_2.5.5-1+b3_arm64.deb ...
Unpacking libseccomp2:arm64 (2.5.5-1+b3) over (2.5.5-1+b2) ...
Setting up libseccomp2:arm64 (2.5.5-1+b3) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 17120 files and directories currently installed.)
Preparing to unpack .../archives/apt_2.9.11_arm64.deb ...
Unpacking apt (2.9.11) over (2.9.10) ...
Setting up apt (2.9.11) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 17117 files and directories currently installed.)
Preparing to unpack .../libaudit-common_1%3a4.0.2-2_all.deb ...
Unpacking libaudit-common (1:4.0.2-2) over (1:4.0.1-3) ...
Setting up libaudit-common (1:4.0.2-2) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 17117 files and directories currently installed.)
Preparing to unpack .../libcap-ng0_0.8.5-3+b1_arm64.deb ...
Unpacking libcap-ng0:arm64 (0.8.5-3+b1) over (0.8.5-3) ...
Setting up libcap-ng0:arm64 (0.8.5-3+b1) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 17118 files and directories currently installed.)
Preparing to unpack .../libaudit1_1%3a4.0.2-2_arm64.deb ...
Unpacking libaudit1:arm64 (1:4.0.2-2) over (1:4.0.1-3) ...
Setting up libaudit1:arm64 (1:4.0.2-2) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 17118 files and directories currently installed.)
Preparing to unpack .../0-login_1%3a4.16.0-2+really2.40.2-11_arm64.deb ...
Unpacking login (1:4.16.0-2+really2.40.2-11) over (1:4.16.0-2+really2.40.2-10) ...
Preparing to unpack .../1-login.defs_1%3a4.16.0-5_all.deb ...
Unpacking login.defs (1:4.16.0-5) over (1:4.16.0-4) ...
Preparing to unpack .../2-libsemanage2_3.7-2+b1_arm64.deb ...
Unpacking libsemanage2:arm64 (3.7-2+b1) over (3.7-2) ...
Preparing to unpack .../3-passwd_1%3a4.16.0-5_arm64.deb ...
Unpacking passwd (1:4.16.0-5) over (1:4.16.0-4) ...
Preparing to unpack .../4-dpkg-dev_1.22.12~1.gbp82cafd_all.deb ...
Unpacking dpkg-dev (1.22.12~1.gbp82cafd) over (1.22.11) ...
Preparing to unpack .../5-libdpkg-perl_1.22.12~1.gbp82cafd_all.deb ...
Unpacking libdpkg-perl (1.22.12~1.gbp82cafd) over (1.22.11) ...
Preparing to unpack .../6-libbrotli1_1.1.0-2+b6_arm64.deb ...
Unpacking libbrotli1:arm64 (1.1.0-2+b6) over (1.1.0-2+b5) ...
Preparing to unpack .../7-libglib2.0-0t64_2.82.2-3_arm64.deb ...
Unpacking libglib2.0-0t64:arm64 (2.82.2-3) over (2.82.2-2) ...
Preparing to unpack .../8-libmarkdown2_2.2.7-2.1_arm64.deb ...
Unpacking libmarkdown2:arm64 (2.2.7-2.1) over (2.2.7-2+b1) ...
Preparing to unpack .../9-libxml2_2.12.7+dfsg+really2.9.14-0.2+b1_arm64.deb ...
Unpacking libxml2:arm64 (2.12.7+dfsg+really2.9.14-0.2+b1) over (2.12.7+dfsg+really2.9.14-0.1) ...
Setting up bsdextrautils (2.40.2-11) ...
Setting up login.defs (1:4.16.0-5) ...
Installing new version of config file /etc/login.defs ...
Setting up libbrotli1:arm64 (1.1.0-2+b6) ...
Setting up libglib2.0-0t64:arm64 (2.82.2-3) ...
No schema files found: doing nothing.
Setting up libdpkg-perl (1.22.12~1.gbp82cafd) ...
Setting up mount (2.40.2-11) ...
Setting up libsemanage2:arm64 (3.7-2+b1) ...
Setting up libxml2:arm64 (2.12.7+dfsg+really2.9.14-0.2+b1) ...
Setting up libmarkdown2:arm64 (2.2.7-2.1) ...
Setting up login (1:4.16.0-2+really2.40.2-11) ...
Setting up dpkg-dev (1.22.12~1.gbp82cafd) ...
Setting up passwd (1:4.16.0-5) ...
Processing triggers for man-db (2.13.0-1) ...
Processing triggers for libc-bin (2.40-3) ...
+------------------------------------------------------------------------------+
| Fetch source files |
+------------------------------------------------------------------------------+
Local sources
-------------
/tmp/debusine-fetch-exec-upload-gnuzj6un/haskell-lumberjack_1.0.3.0-2.dsc exists in /tmp/debusine-fetch-exec-upload-gnuzj6un; copying to chroot
I: NOTICE: Log filtering will replace 'build/haskell-lumberjack-umSBNx/haskell-lumberjack-1.0.3.0' with '<<PKGBUILDDIR>>'
I: NOTICE: Log filtering will replace 'build/haskell-lumberjack-umSBNx' with '<<BUILDDIR>>'
+------------------------------------------------------------------------------+
| Install package build dependencies |
+------------------------------------------------------------------------------+
Setup apt archive
-----------------
Merged Build-Depends: debhelper (>= 10), haskell-devscripts-minimal | haskell-devscripts (>= 0.13), cdbs, ghc (>= 9.4), ghc-prof, libghc-contravariant-dev (>= 1.5), libghc-contravariant-dev (<< 1.6), libghc-contravariant-prof, libghc-prettyprinter-dev (>= 1.6), libghc-prettyprinter-dev (<< 1.8), libghc-prettyprinter-prof, libghc-prettyprinter-ansi-terminal-dev (>= 1.1.1.2), libghc-prettyprinter-ansi-terminal-dev (<< 1.2), libghc-prettyprinter-ansi-terminal-prof, build-essential, fakeroot, ghc-doc, libghc-contravariant-doc, libghc-prettyprinter-doc, libghc-prettyprinter-ansi-terminal-doc
Filtered Build-Depends: debhelper (>= 10), haskell-devscripts-minimal, cdbs, ghc (>= 9.4), ghc-prof, libghc-contravariant-dev (>= 1.5), libghc-contravariant-dev (<< 1.6), libghc-contravariant-prof, libghc-prettyprinter-dev (>= 1.6), libghc-prettyprinter-dev (<< 1.8), libghc-prettyprinter-prof, libghc-prettyprinter-ansi-terminal-dev (>= 1.1.1.2), libghc-prettyprinter-ansi-terminal-dev (<< 1.2), libghc-prettyprinter-ansi-terminal-prof, build-essential, fakeroot, ghc-doc, libghc-contravariant-doc, libghc-prettyprinter-doc, libghc-prettyprinter-ansi-terminal-doc
dpkg-deb: warning: root directory has unusual owner or group 998:999.
Hint: either pass --root-owner-group, see dpkg-build-api(7) or add an explicit 'Rules-Requires-Root: no' in debian/control.
dpkg-deb: warning: ignoring 1 warning about the control file(s)
dpkg-deb: building package 'sbuild-build-depends-main-dummy' in '/<<RESOLVERDIR>>/apt_archive/sbuild-build-depends-main-dummy.deb'.
Ign:1 copy:/<<RESOLVERDIR>>/apt_archive ./ InRelease
Get:2 copy:/<<RESOLVERDIR>>/apt_archive ./ Release [615 B]
Ign:3 copy:/<<RESOLVERDIR>>/apt_archive ./ Release.gpg
Get:4 copy:/<<RESOLVERDIR>>/apt_archive ./ Sources [1158 B]
Get:5 copy:/<<RESOLVERDIR>>/apt_archive ./ Packages [1140 B]
Fetched 2913 B in 0s (224 kB/s)
Reading package lists...
Get:1 file:/<<BUILDDIR>>/resolver-pfkbSw/apt_archive ./ InRelease
Ign:1 file:/<<BUILDDIR>>/resolver-pfkbSw/apt_archive ./ InRelease
Get:2 file:/<<BUILDDIR>>/resolver-pfkbSw/apt_archive ./ Release [606 B]
Get:2 file:/<<BUILDDIR>>/resolver-pfkbSw/apt_archive ./ Release [606 B]
Get:3 file:/<<BUILDDIR>>/resolver-pfkbSw/apt_archive ./ Release.gpg
Ign:3 file:/<<BUILDDIR>>/resolver-pfkbSw/apt_archive ./ Release.gpg
Reading package lists...
Reading package lists...
Install main build dependencies (apt-based resolver)
----------------------------------------------------
Installing build dependencies
Reading package lists...
Building dependency tree...
Reading state information...
The following additional packages will be installed:
autoconf automake autopoint autotools-dev build-essential cdbs cpp cpp-14
cpp-14-aarch64-linux-gnu cpp-aarch64-linux-gnu dctrl-tools debhelper
dh-autoreconf dh-buildinfo dh-strip-nondeterminism dwz fakeroot
fonts-mathjax g++ g++-14 g++-14-aarch64-linux-gnu g++-aarch64-linux-gnu gcc
gcc-14 gcc-14-aarch64-linux-gnu gcc-aarch64-linux-gnu ghc ghc-doc ghc-prof
haskell-devscripts-minimal html-xml-utils libasan8 libbsd-dev libc-dev-bin
libc6-dev libcc1-0 libcrypt-dev libdebhelper-perl libdevel-confess-perl
libelf1t64 libexpat1 libfakeroot libffi-dev libfile-stripnondeterminism-perl
libgcc-14-dev libghc-ansi-terminal-dev libghc-ansi-terminal-prof
libghc-ansi-terminal-types-dev libghc-ansi-terminal-types-prof
libghc-colour-dev libghc-colour-prof libghc-contravariant-dev
libghc-contravariant-doc libghc-contravariant-prof
libghc-prettyprinter-ansi-terminal-dev
libghc-prettyprinter-ansi-terminal-doc
libghc-prettyprinter-ansi-terminal-prof libghc-prettyprinter-dev
libghc-prettyprinter-doc libghc-prettyprinter-prof libghc-statevar-dev
libghc-statevar-prof libgmp-dev libgmpxx4ldbl libhwasan0 libisl23 libitm1
libjs-mathjax liblsan0 libmd-dev libmpc3 libmpfr6 libncurses-dev libncurses6
libncursesw6 libnsl2 libnuma-dev libnuma1 libpython3-stdlib
libpython3.12-minimal libpython3.12-stdlib libstdc++-14-dev libtirpc-common
libtirpc3t64 libtool libtsan2 libubsan1 linux-libc-dev m4 media-types
po-debconf python3 python3-minimal python3-scour python3.12
python3.12-minimal rpcsvc-proto scour
Suggested packages:
autoconf-archive gnu-standards autoconf-doc devscripts cpp-doc
gcc-14-locales cpp-14-doc debtags dh-make gcc-14-doc gcc-multilib
manpages-dev flex bison gdb gcc-doc gdb-aarch64-linux-gnu llvm-18
haskell-devscripts libc-devtools glibc-doc gmp-doc libgmp10-doc libmpfr-dev
fonts-mathjax-extras fonts-stix libjs-mathjax-doc ncurses-doc
libstdc++-14-doc libtool-doc gfortran | fortran95-compiler gcj-jdk m4-doc
libmail-box-perl python3-doc python3-tk python3-venv python3.12-venv
python3.12-doc binfmt-support gir1.2-rsvg-2.0 python3-gi-cairo
Recommended packages:
manpages manpages-dev libarchive-cpio-perl libghc-statevar-doc
libghc-ansi-terminal-doc libgpm2 libltdl-dev libmail-sendmail-perl
The following NEW packages will be installed:
autoconf automake autopoint autotools-dev build-essential cdbs cpp cpp-14
cpp-14-aarch64-linux-gnu cpp-aarch64-linux-gnu dctrl-tools debhelper
dh-autoreconf dh-buildinfo dh-strip-nondeterminism dwz fakeroot
fonts-mathjax g++ g++-14 g++-14-aarch64-linux-gnu g++-aarch64-linux-gnu gcc
gcc-14 gcc-14-aarch64-linux-gnu gcc-aarch64-linux-gnu ghc ghc-doc ghc-prof
haskell-devscripts-minimal html-xml-utils libasan8 libbsd-dev libc-dev-bin
libc6-dev libcc1-0 libcrypt-dev libdebhelper-perl libdevel-confess-perl
libelf1t64 libexpat1 libfakeroot libffi-dev libfile-stripnondeterminism-perl
libgcc-14-dev libghc-ansi-terminal-dev libghc-ansi-terminal-prof
libghc-ansi-terminal-types-dev libghc-ansi-terminal-types-prof
libghc-colour-dev libghc-colour-prof libghc-contravariant-dev
libghc-contravariant-doc libghc-contravariant-prof
libghc-prettyprinter-ansi-terminal-dev
libghc-prettyprinter-ansi-terminal-doc
libghc-prettyprinter-ansi-terminal-prof libghc-prettyprinter-dev
libghc-prettyprinter-doc libghc-prettyprinter-prof libghc-statevar-dev
libghc-statevar-prof libgmp-dev libgmpxx4ldbl libhwasan0 libisl23 libitm1
libjs-mathjax liblsan0 libmd-dev libmpc3 libmpfr6 libncurses-dev libncurses6
libncursesw6 libnsl2 libnuma-dev libnuma1 libpython3-stdlib
libpython3.12-minimal libpython3.12-stdlib libstdc++-14-dev libtirpc-common
libtirpc3t64 libtool libtsan2 libubsan1 linux-libc-dev m4 media-types
po-debconf python3 python3-minimal python3-scour python3.12
python3.12-minimal rpcsvc-proto sbuild-build-depends-main-dummy scour
0 upgraded, 99 newly installed, 0 to remove and 0 not upgraded.
Need to get 258 MB of archives.
After this operation, 2543 MB of additional disk space will be used.
Get:1 copy:/<<RESOLVERDIR>>/apt_archive ./ sbuild-build-depends-main-dummy 0.invalid.0 [1008 B]
Get:2 http://deb.debian.org/debian sid/main arm64 libisl23 arm64 0.27-1 [601 kB]
Get:3 http://deb.debian.org/debian sid/main arm64 libmpfr6 arm64 4.2.1-1+b2 [680 kB]
Get:4 http://deb.debian.org/debian sid/main arm64 libmpc3 arm64 1.3.1-1+b3 [50.5 kB]
Get:5 http://deb.debian.org/debian sid/main arm64 cpp-14-aarch64-linux-gnu arm64 14.2.0-8 [9166 kB]
Get:6 http://deb.debian.org/debian sid/main arm64 cpp-14 arm64 14.2.0-8 [1284 B]
Get:7 http://deb.debian.org/debian sid/main arm64 cpp-aarch64-linux-gnu arm64 4:14.2.0-1 [4832 B]
Get:8 http://deb.debian.org/debian sid/main arm64 cpp arm64 4:14.2.0-1 [1568 B]
Get:9 http://deb.debian.org/debian sid/main arm64 libcc1-0 arm64 14.2.0-8 [42.2 kB]
Get:10 http://deb.debian.org/debian sid/main arm64 libitm1 arm64 14.2.0-8 [24.2 kB]
Get:11 http://deb.debian.org/debian sid/main arm64 libasan8 arm64 14.2.0-8 [2579 kB]
Get:12 http://deb.debian.org/debian sid/main arm64 liblsan0 arm64 14.2.0-8 [1161 kB]
Get:13 http://deb.debian.org/debian sid/main arm64 libtsan2 arm64 14.2.0-8 [2386 kB]
Get:14 http://deb.debian.org/debian sid/main arm64 libubsan1 arm64 14.2.0-8 [1039 kB]
Get:15 http://deb.debian.org/debian sid/main arm64 libhwasan0 arm64 14.2.0-8 [1442 kB]
Get:16 http://deb.debian.org/debian sid/main arm64 libgcc-14-dev arm64 14.2.0-8 [2365 kB]
Get:17 http://deb.debian.org/debian sid/main arm64 gcc-14-aarch64-linux-gnu arm64 14.2.0-8 [17.7 MB]
Get:18 http://deb.debian.org/debian sid/main arm64 gcc-14 arm64 14.2.0-8 [519 kB]
Get:19 http://deb.debian.org/debian sid/main arm64 gcc-aarch64-linux-gnu arm64 4:14.2.0-1 [1440 B]
Get:20 http://deb.debian.org/debian sid/main arm64 gcc arm64 4:14.2.0-1 [5136 B]
Get:21 http://deb.debian.org/debian sid/main arm64 libgmpxx4ldbl arm64 2:6.3.0+dfsg-2+b2 [329 kB]
Get:22 http://deb.debian.org/debian sid/main arm64 libgmp-dev arm64 2:6.3.0+dfsg-2+b2 [621 kB]
Get:23 http://deb.debian.org/debian sid/main arm64 libffi-dev arm64 3.4.6-1 [57.0 kB]
Get:24 http://deb.debian.org/debian sid/main arm64 libmd-dev arm64 1.1.0-2+b1 [53.3 kB]
Get:25 http://deb.debian.org/debian sid/main arm64 libbsd-dev arm64 0.12.2-2 [257 kB]
Get:26 http://deb.debian.org/debian sid/main arm64 libc-dev-bin arm64 2.40-3 [50.9 kB]
Get:27 http://deb.debian.org/debian sid/main arm64 linux-libc-dev all 6.11.7-1 [2454 kB]
Get:28 http://deb.debian.org/debian sid/main arm64 libcrypt-dev arm64 1:4.4.36-5 [122 kB]
Get:29 http://deb.debian.org/debian sid/main arm64 rpcsvc-proto arm64 1.4.3-1+b1 [60.5 kB]
Get:30 http://deb.debian.org/debian sid/main arm64 libc6-dev arm64 2.40-3 [1591 kB]
Get:31 http://deb.debian.org/debian sid/main arm64 libncurses6 arm64 6.5-2+b1 [96.1 kB]
Get:32 http://deb.debian.org/debian sid/main arm64 libncursesw6 arm64 6.5-2+b1 [125 kB]
Get:33 http://deb.debian.org/debian sid/main arm64 libncurses-dev arm64 6.5-2+b1 [338 kB]
Get:34 http://deb.debian.org/debian sid/main arm64 libnuma1 arm64 2.0.18-1+b1 [21.8 kB]
Get:35 http://deb.debian.org/debian sid/main arm64 libnuma-dev arm64 2.0.18-1+b1 [37.8 kB]
Get:36 http://deb.debian.org/debian sid/main arm64 ghc arm64 9.6.6-3 [80.5 MB]
Get:37 http://deb.debian.org/debian sid/main arm64 fonts-mathjax all 2.7.9+dfsg-1 [2210 kB]
Get:38 http://deb.debian.org/debian sid/main arm64 libjs-mathjax all 2.7.9+dfsg-1 [5667 kB]
Get:39 http://deb.debian.org/debian sid/main arm64 ghc-doc all 9.6.6-3 [33.7 MB]
Get:40 http://deb.debian.org/debian sid/main arm64 libpython3.12-minimal arm64 3.12.7-3 [808 kB]
Get:41 http://deb.debian.org/debian sid/main arm64 libexpat1 arm64 2.6.4-1 [90.7 kB]
Get:42 http://deb.debian.org/debian sid/main arm64 python3.12-minimal arm64 3.12.7-3 [1940 kB]
Get:43 http://deb.debian.org/debian sid/main arm64 python3-minimal arm64 3.12.7-1 [26.8 kB]
Get:44 http://deb.debian.org/debian sid/main arm64 media-types all 10.1.0 [26.9 kB]
Get:45 http://deb.debian.org/debian sid/main arm64 libtirpc-common all 1.3.4+ds-1.3 [10.9 kB]
Get:46 http://deb.debian.org/debian sid/main arm64 libtirpc3t64 arm64 1.3.4+ds-1.3+b1 [78.7 kB]
Get:47 http://deb.debian.org/debian sid/main arm64 libnsl2 arm64 1.3.0-3+b3 [37.9 kB]
Get:48 http://deb.debian.org/debian sid/main arm64 libpython3.12-stdlib arm64 3.12.7-3 [1902 kB]
Get:49 http://deb.debian.org/debian sid/main arm64 python3.12 arm64 3.12.7-3 [671 kB]
Get:50 http://deb.debian.org/debian sid/main arm64 libpython3-stdlib arm64 3.12.7-1 [9708 B]
Get:51 http://deb.debian.org/debian sid/main arm64 python3 arm64 3.12.7-1 [27.8 kB]
Get:52 http://deb.debian.org/debian sid/main arm64 m4 arm64 1.4.19-4 [277 kB]
Get:53 http://deb.debian.org/debian sid/main arm64 autoconf all 2.72-3 [493 kB]
Get:54 http://deb.debian.org/debian sid/main arm64 autotools-dev all 20220109.1 [51.6 kB]
Get:55 http://deb.debian.org/debian sid/main arm64 automake all 1:1.16.5-1.3 [823 kB]
Get:56 http://deb.debian.org/debian sid/main arm64 autopoint all 0.22.5-2 [723 kB]
Get:57 http://deb.debian.org/debian sid/main arm64 libstdc++-14-dev arm64 14.2.0-8 [2267 kB]
Get:58 http://deb.debian.org/debian sid/main arm64 g++-14-aarch64-linux-gnu arm64 14.2.0-8 [10.1 MB]
Get:59 http://deb.debian.org/debian sid/main arm64 g++-14 arm64 14.2.0-8 [20.2 kB]
Get:60 http://deb.debian.org/debian sid/main arm64 g++-aarch64-linux-gnu arm64 4:14.2.0-1 [1200 B]
Get:61 http://deb.debian.org/debian sid/main arm64 g++ arm64 4:14.2.0-1 [1332 B]
Get:62 http://deb.debian.org/debian sid/main arm64 build-essential arm64 12.12 [4624 B]
Get:63 http://deb.debian.org/debian sid/main arm64 python3-scour all 0.38.2-5 [55.7 kB]
Get:64 http://deb.debian.org/debian sid/main arm64 scour all 0.38.2-5 [16.3 kB]
Get:65 http://deb.debian.org/debian sid/main arm64 cdbs all 0.4.166 [47.3 kB]
Get:66 http://deb.debian.org/debian sid/main arm64 dctrl-tools arm64 2.24-3+b1 [125 kB]
Get:67 http://deb.debian.org/debian sid/main arm64 libdebhelper-perl all 13.20 [89.7 kB]
Get:68 http://deb.debian.org/debian sid/main arm64 libtool all 2.4.7-8 [517 kB]
Get:69 http://deb.debian.org/debian sid/main arm64 dh-autoreconf all 20 [17.1 kB]
Get:70 http://deb.debian.org/debian sid/main arm64 libfile-stripnondeterminism-perl all 1.14.0-1 [19.5 kB]
Get:71 http://deb.debian.org/debian sid/main arm64 dh-strip-nondeterminism all 1.14.0-1 [8448 B]
Get:72 http://deb.debian.org/debian sid/main arm64 libelf1t64 arm64 0.192-4 [189 kB]
Get:73 http://deb.debian.org/debian sid/main arm64 dwz arm64 0.15-1+b1 [102 kB]
Get:74 http://deb.debian.org/debian sid/main arm64 po-debconf all 1.0.21+nmu1 [248 kB]
Get:75 http://deb.debian.org/debian sid/main arm64 debhelper all 13.20 [915 kB]
Get:76 http://deb.debian.org/debian sid/main arm64 dh-buildinfo all 0.11+nmu3 [17.1 kB]
Get:77 http://deb.debian.org/debian sid/main arm64 libfakeroot arm64 1.36-1 [29.1 kB]
Get:78 http://deb.debian.org/debian sid/main arm64 fakeroot arm64 1.36-1 [74.4 kB]
Get:79 http://deb.debian.org/debian sid/main arm64 ghc-prof arm64 9.6.6-3 [64.5 MB]
Get:80 http://deb.debian.org/debian sid/main arm64 html-xml-utils arm64 7.7-1.1+b2 [291 kB]
Get:81 http://deb.debian.org/debian sid/main arm64 libdevel-confess-perl all 0.009004-4 [19.3 kB]
Get:82 http://deb.debian.org/debian sid/main arm64 haskell-devscripts-minimal all 0.16.33 [53.0 kB]
Get:83 http://deb.debian.org/debian sid/main arm64 libghc-colour-dev arm64 2.3.6-3 [212 kB]
Get:84 http://deb.debian.org/debian sid/main arm64 libghc-ansi-terminal-types-dev arm64 0.11.5-3 [102 kB]
Get:85 http://deb.debian.org/debian sid/main arm64 libghc-ansi-terminal-dev arm64 1.0.2-1 [68.1 kB]
Get:86 http://deb.debian.org/debian sid/main arm64 libghc-colour-prof arm64 2.3.6-3 [229 kB]
Get:87 http://deb.debian.org/debian sid/main arm64 libghc-ansi-terminal-types-prof arm64 0.11.5-3 [99.5 kB]
Get:88 http://deb.debian.org/debian sid/main arm64 libghc-ansi-terminal-prof arm64 1.0.2-1 [72.1 kB]
Get:89 http://deb.debian.org/debian sid/main arm64 libghc-statevar-dev arm64 1.2.2-3 [26.4 kB]
Get:90 http://deb.debian.org/debian sid/main arm64 libghc-contravariant-dev arm64 1.5.5-3 [73.2 kB]
Get:91 http://deb.debian.org/debian sid/main arm64 libghc-contravariant-doc all 1.5.5-3 [71.9 kB]
Get:92 http://deb.debian.org/debian sid/main arm64 libghc-statevar-prof arm64 1.2.2-3 [25.8 kB]
Get:93 http://deb.debian.org/debian sid/main arm64 libghc-contravariant-prof arm64 1.5.5-3 [78.8 kB]
Get:94 http://deb.debian.org/debian sid/main arm64 libghc-prettyprinter-dev arm64 1.7.1-3 [317 kB]
Get:95 http://deb.debian.org/debian sid/main arm64 libghc-prettyprinter-ansi-terminal-dev arm64 1.1.3-3 [73.4 kB]
Get:96 http://deb.debian.org/debian sid/main arm64 libghc-prettyprinter-ansi-terminal-doc all 1.1.3-3 [57.1 kB]
Get:97 http://deb.debian.org/debian sid/main arm64 libghc-prettyprinter-prof arm64 1.7.1-3 [321 kB]
Get:98 http://deb.debian.org/debian sid/main arm64 libghc-prettyprinter-ansi-terminal-prof arm64 1.1.3-3 [69.9 kB]
Get:99 http://deb.debian.org/debian sid/main arm64 libghc-prettyprinter-doc all 1.7.1-3 [177 kB]
debconf: delaying package configuration, since apt-utils is not installed
Fetched 258 MB in 3s (78.6 MB/s)
Selecting previously unselected package libisl23:arm64.
(Reading database ... 17119 files and directories currently installed.)
Preparing to unpack .../00-libisl23_0.27-1_arm64.deb ...
Unpacking libisl23:arm64 (0.27-1) ...
Selecting previously unselected package libmpfr6:arm64.
Preparing to unpack .../01-libmpfr6_4.2.1-1+b2_arm64.deb ...
Unpacking libmpfr6:arm64 (4.2.1-1+b2) ...
Selecting previously unselected package libmpc3:arm64.
Preparing to unpack .../02-libmpc3_1.3.1-1+b3_arm64.deb ...
Unpacking libmpc3:arm64 (1.3.1-1+b3) ...
Selecting previously unselected package cpp-14-aarch64-linux-gnu.
Preparing to unpack .../03-cpp-14-aarch64-linux-gnu_14.2.0-8_arm64.deb ...
Unpacking cpp-14-aarch64-linux-gnu (14.2.0-8) ...
Selecting previously unselected package cpp-14.
Preparing to unpack .../04-cpp-14_14.2.0-8_arm64.deb ...
Unpacking cpp-14 (14.2.0-8) ...
Selecting previously unselected package cpp-aarch64-linux-gnu.
Preparing to unpack .../05-cpp-aarch64-linux-gnu_4%3a14.2.0-1_arm64.deb ...
Unpacking cpp-aarch64-linux-gnu (4:14.2.0-1) ...
Selecting previously unselected package cpp.
Preparing to unpack .../06-cpp_4%3a14.2.0-1_arm64.deb ...
Unpacking cpp (4:14.2.0-1) ...
Selecting previously unselected package libcc1-0:arm64.
Preparing to unpack .../07-libcc1-0_14.2.0-8_arm64.deb ...
Unpacking libcc1-0:arm64 (14.2.0-8) ...
Selecting previously unselected package libitm1:arm64.
Preparing to unpack .../08-libitm1_14.2.0-8_arm64.deb ...
Unpacking libitm1:arm64 (14.2.0-8) ...
Selecting previously unselected package libasan8:arm64.
Preparing to unpack .../09-libasan8_14.2.0-8_arm64.deb ...
Unpacking libasan8:arm64 (14.2.0-8) ...
Selecting previously unselected package liblsan0:arm64.
Preparing to unpack .../10-liblsan0_14.2.0-8_arm64.deb ...
Unpacking liblsan0:arm64 (14.2.0-8) ...
Selecting previously unselected package libtsan2:arm64.
Preparing to unpack .../11-libtsan2_14.2.0-8_arm64.deb ...
Unpacking libtsan2:arm64 (14.2.0-8) ...
Selecting previously unselected package libubsan1:arm64.
Preparing to unpack .../12-libubsan1_14.2.0-8_arm64.deb ...
Unpacking libubsan1:arm64 (14.2.0-8) ...
Selecting previously unselected package libhwasan0:arm64.
Preparing to unpack .../13-libhwasan0_14.2.0-8_arm64.deb ...
Unpacking libhwasan0:arm64 (14.2.0-8) ...
Selecting previously unselected package libgcc-14-dev:arm64.
Preparing to unpack .../14-libgcc-14-dev_14.2.0-8_arm64.deb ...
Unpacking libgcc-14-dev:arm64 (14.2.0-8) ...
Selecting previously unselected package gcc-14-aarch64-linux-gnu.
Preparing to unpack .../15-gcc-14-aarch64-linux-gnu_14.2.0-8_arm64.deb ...
Unpacking gcc-14-aarch64-linux-gnu (14.2.0-8) ...
Selecting previously unselected package gcc-14.
Preparing to unpack .../16-gcc-14_14.2.0-8_arm64.deb ...
Unpacking gcc-14 (14.2.0-8) ...
Selecting previously unselected package gcc-aarch64-linux-gnu.
Preparing to unpack .../17-gcc-aarch64-linux-gnu_4%3a14.2.0-1_arm64.deb ...
Unpacking gcc-aarch64-linux-gnu (4:14.2.0-1) ...
Selecting previously unselected package gcc.
Preparing to unpack .../18-gcc_4%3a14.2.0-1_arm64.deb ...
Unpacking gcc (4:14.2.0-1) ...
Selecting previously unselected package libgmpxx4ldbl:arm64.
Preparing to unpack .../19-libgmpxx4ldbl_2%3a6.3.0+dfsg-2+b2_arm64.deb ...
Unpacking libgmpxx4ldbl:arm64 (2:6.3.0+dfsg-2+b2) ...
Selecting previously unselected package libgmp-dev:arm64.
Preparing to unpack .../20-libgmp-dev_2%3a6.3.0+dfsg-2+b2_arm64.deb ...
Unpacking libgmp-dev:arm64 (2:6.3.0+dfsg-2+b2) ...
Selecting previously unselected package libffi-dev:arm64.
Preparing to unpack .../21-libffi-dev_3.4.6-1_arm64.deb ...
Unpacking libffi-dev:arm64 (3.4.6-1) ...
Selecting previously unselected package libmd-dev:arm64.
Preparing to unpack .../22-libmd-dev_1.1.0-2+b1_arm64.deb ...
Unpacking libmd-dev:arm64 (1.1.0-2+b1) ...
Selecting previously unselected package libbsd-dev:arm64.
Preparing to unpack .../23-libbsd-dev_0.12.2-2_arm64.deb ...
Unpacking libbsd-dev:arm64 (0.12.2-2) ...
Selecting previously unselected package libc-dev-bin.
Preparing to unpack .../24-libc-dev-bin_2.40-3_arm64.deb ...
Unpacking libc-dev-bin (2.40-3) ...
Selecting previously unselected package linux-libc-dev.
Preparing to unpack .../25-linux-libc-dev_6.11.7-1_all.deb ...
Unpacking linux-libc-dev (6.11.7-1) ...
Selecting previously unselected package libcrypt-dev:arm64.
Preparing to unpack .../26-libcrypt-dev_1%3a4.4.36-5_arm64.deb ...
Unpacking libcrypt-dev:arm64 (1:4.4.36-5) ...
Selecting previously unselected package rpcsvc-proto.
Preparing to unpack .../27-rpcsvc-proto_1.4.3-1+b1_arm64.deb ...
Unpacking rpcsvc-proto (1.4.3-1+b1) ...
Selecting previously unselected package libc6-dev:arm64.
Preparing to unpack .../28-libc6-dev_2.40-3_arm64.deb ...
Unpacking libc6-dev:arm64 (2.40-3) ...
Selecting previously unselected package libncurses6:arm64.
Preparing to unpack .../29-libncurses6_6.5-2+b1_arm64.deb ...
Unpacking libncurses6:arm64 (6.5-2+b1) ...
Selecting previously unselected package libncursesw6:arm64.
Preparing to unpack .../30-libncursesw6_6.5-2+b1_arm64.deb ...
Unpacking libncursesw6:arm64 (6.5-2+b1) ...
Selecting previously unselected package libncurses-dev:arm64.
Preparing to unpack .../31-libncurses-dev_6.5-2+b1_arm64.deb ...
Unpacking libncurses-dev:arm64 (6.5-2+b1) ...
Selecting previously unselected package libnuma1:arm64.
Preparing to unpack .../32-libnuma1_2.0.18-1+b1_arm64.deb ...
Unpacking libnuma1:arm64 (2.0.18-1+b1) ...
Selecting previously unselected package libnuma-dev:arm64.
Preparing to unpack .../33-libnuma-dev_2.0.18-1+b1_arm64.deb ...
Unpacking libnuma-dev:arm64 (2.0.18-1+b1) ...
Selecting previously unselected package ghc.
Preparing to unpack .../34-ghc_9.6.6-3_arm64.deb ...
Unpacking ghc (9.6.6-3) ...
Selecting previously unselected package fonts-mathjax.
Preparing to unpack .../35-fonts-mathjax_2.7.9+dfsg-1_all.deb ...
Unpacking fonts-mathjax (2.7.9+dfsg-1) ...
Selecting previously unselected package libjs-mathjax.
Preparing to unpack .../36-libjs-mathjax_2.7.9+dfsg-1_all.deb ...
Unpacking libjs-mathjax (2.7.9+dfsg-1) ...
Selecting previously unselected package ghc-doc.
Preparing to unpack .../37-ghc-doc_9.6.6-3_all.deb ...
Unpacking ghc-doc (9.6.6-3) ...
Selecting previously unselected package libpython3.12-minimal:arm64.
Preparing to unpack .../38-libpython3.12-minimal_3.12.7-3_arm64.deb ...
Unpacking libpython3.12-minimal:arm64 (3.12.7-3) ...
Selecting previously unselected package libexpat1:arm64.
Preparing to unpack .../39-libexpat1_2.6.4-1_arm64.deb ...
Unpacking libexpat1:arm64 (2.6.4-1) ...
Selecting previously unselected package python3.12-minimal.
Preparing to unpack .../40-python3.12-minimal_3.12.7-3_arm64.deb ...
Unpacking python3.12-minimal (3.12.7-3) ...
Setting up libpython3.12-minimal:arm64 (3.12.7-3) ...
Setting up libexpat1:arm64 (2.6.4-1) ...
Setting up python3.12-minimal (3.12.7-3) ...
Selecting previously unselected package python3-minimal.
(Reading database ... 35226 files and directories currently installed.)
Preparing to unpack .../0-python3-minimal_3.12.7-1_arm64.deb ...
Unpacking python3-minimal (3.12.7-1) ...
Selecting previously unselected package media-types.
Preparing to unpack .../1-media-types_10.1.0_all.deb ...
Unpacking media-types (10.1.0) ...
Selecting previously unselected package libtirpc-common.
Preparing to unpack .../2-libtirpc-common_1.3.4+ds-1.3_all.deb ...
Unpacking libtirpc-common (1.3.4+ds-1.3) ...
Selecting previously unselected package libtirpc3t64:arm64.
Preparing to unpack .../3-libtirpc3t64_1.3.4+ds-1.3+b1_arm64.deb ...
Adding 'diversion of /lib/aarch64-linux-gnu/libtirpc.so.3 to /lib/aarch64-linux-gnu/libtirpc.so.3.usr-is-merged by libtirpc3t64'
Adding 'diversion of /lib/aarch64-linux-gnu/libtirpc.so.3.0.0 to /lib/aarch64-linux-gnu/libtirpc.so.3.0.0.usr-is-merged by libtirpc3t64'
Unpacking libtirpc3t64:arm64 (1.3.4+ds-1.3+b1) ...
Selecting previously unselected package libnsl2:arm64.
Preparing to unpack .../4-libnsl2_1.3.0-3+b3_arm64.deb ...
Unpacking libnsl2:arm64 (1.3.0-3+b3) ...
Selecting previously unselected package libpython3.12-stdlib:arm64.
Preparing to unpack .../5-libpython3.12-stdlib_3.12.7-3_arm64.deb ...
Unpacking libpython3.12-stdlib:arm64 (3.12.7-3) ...
Selecting previously unselected package python3.12.
Preparing to unpack .../6-python3.12_3.12.7-3_arm64.deb ...
Unpacking python3.12 (3.12.7-3) ...
Selecting previously unselected package libpython3-stdlib:arm64.
Preparing to unpack .../7-libpython3-stdlib_3.12.7-1_arm64.deb ...
Unpacking libpython3-stdlib:arm64 (3.12.7-1) ...
Setting up python3-minimal (3.12.7-1) ...
Selecting previously unselected package python3.
(Reading database ... 35690 files and directories currently installed.)
Preparing to unpack .../00-python3_3.12.7-1_arm64.deb ...
Unpacking python3 (3.12.7-1) ...
Selecting previously unselected package m4.
Preparing to unpack .../01-m4_1.4.19-4_arm64.deb ...
Unpacking m4 (1.4.19-4) ...
Selecting previously unselected package autoconf.
Preparing to unpack .../02-autoconf_2.72-3_all.deb ...
Unpacking autoconf (2.72-3) ...
Selecting previously unselected package autotools-dev.
Preparing to unpack .../03-autotools-dev_20220109.1_all.deb ...
Unpacking autotools-dev (20220109.1) ...
Selecting previously unselected package automake.
Preparing to unpack .../04-automake_1%3a1.16.5-1.3_all.deb ...
Unpacking automake (1:1.16.5-1.3) ...
Selecting previously unselected package autopoint.
Preparing to unpack .../05-autopoint_0.22.5-2_all.deb ...
Unpacking autopoint (0.22.5-2) ...
Selecting previously unselected package libstdc++-14-dev:arm64.
Preparing to unpack .../06-libstdc++-14-dev_14.2.0-8_arm64.deb ...
Unpacking libstdc++-14-dev:arm64 (14.2.0-8) ...
Selecting previously unselected package g++-14-aarch64-linux-gnu.
Preparing to unpack .../07-g++-14-aarch64-linux-gnu_14.2.0-8_arm64.deb ...
Unpacking g++-14-aarch64-linux-gnu (14.2.0-8) ...
Selecting previously unselected package g++-14.
Preparing to unpack .../08-g++-14_14.2.0-8_arm64.deb ...
Unpacking g++-14 (14.2.0-8) ...
Selecting previously unselected package g++-aarch64-linux-gnu.
Preparing to unpack .../09-g++-aarch64-linux-gnu_4%3a14.2.0-1_arm64.deb ...
Unpacking g++-aarch64-linux-gnu (4:14.2.0-1) ...
Selecting previously unselected package g++.
Preparing to unpack .../10-g++_4%3a14.2.0-1_arm64.deb ...
Unpacking g++ (4:14.2.0-1) ...
Selecting previously unselected package build-essential.
Preparing to unpack .../11-build-essential_12.12_arm64.deb ...
Unpacking build-essential (12.12) ...
Selecting previously unselected package python3-scour.
Preparing to unpack .../12-python3-scour_0.38.2-5_all.deb ...
Unpacking python3-scour (0.38.2-5) ...
Selecting previously unselected package scour.
Preparing to unpack .../13-scour_0.38.2-5_all.deb ...
Unpacking scour (0.38.2-5) ...
Selecting previously unselected package cdbs.
Preparing to unpack .../14-cdbs_0.4.166_all.deb ...
Unpacking cdbs (0.4.166) ...
Selecting previously unselected package dctrl-tools.
Preparing to unpack .../15-dctrl-tools_2.24-3+b1_arm64.deb ...
Unpacking dctrl-tools (2.24-3+b1) ...
Selecting previously unselected package libdebhelper-perl.
Preparing to unpack .../16-libdebhelper-perl_13.20_all.deb ...
Unpacking libdebhelper-perl (13.20) ...
Selecting previously unselected package libtool.
Preparing to unpack .../17-libtool_2.4.7-8_all.deb ...
Unpacking libtool (2.4.7-8) ...
Selecting previously unselected package dh-autoreconf.
Preparing to unpack .../18-dh-autoreconf_20_all.deb ...
Unpacking dh-autoreconf (20) ...
Selecting previously unselected package libfile-stripnondeterminism-perl.
Preparing to unpack .../19-libfile-stripnondeterminism-perl_1.14.0-1_all.deb ...
Unpacking libfile-stripnondeterminism-perl (1.14.0-1) ...
Selecting previously unselected package dh-strip-nondeterminism.
Preparing to unpack .../20-dh-strip-nondeterminism_1.14.0-1_all.deb ...
Unpacking dh-strip-nondeterminism (1.14.0-1) ...
Selecting previously unselected package libelf1t64:arm64.
Preparing to unpack .../21-libelf1t64_0.192-4_arm64.deb ...
Unpacking libelf1t64:arm64 (0.192-4) ...
Selecting previously unselected package dwz.
Preparing to unpack .../22-dwz_0.15-1+b1_arm64.deb ...
Unpacking dwz (0.15-1+b1) ...
Selecting previously unselected package po-debconf.
Preparing to unpack .../23-po-debconf_1.0.21+nmu1_all.deb ...
Unpacking po-debconf (1.0.21+nmu1) ...
Selecting previously unselected package debhelper.
Preparing to unpack .../24-debhelper_13.20_all.deb ...
Unpacking debhelper (13.20) ...
Selecting previously unselected package dh-buildinfo.
Preparing to unpack .../25-dh-buildinfo_0.11+nmu3_all.deb ...
Unpacking dh-buildinfo (0.11+nmu3) ...
Selecting previously unselected package libfakeroot:arm64.
Preparing to unpack .../26-libfakeroot_1.36-1_arm64.deb ...
Unpacking libfakeroot:arm64 (1.36-1) ...
Selecting previously unselected package fakeroot.
Preparing to unpack .../27-fakeroot_1.36-1_arm64.deb ...
Unpacking fakeroot (1.36-1) ...
Selecting previously unselected package ghc-prof.
Preparing to unpack .../28-ghc-prof_9.6.6-3_arm64.deb ...
Unpacking ghc-prof (9.6.6-3) ...
Selecting previously unselected package html-xml-utils.
Preparing to unpack .../29-html-xml-utils_7.7-1.1+b2_arm64.deb ...
Unpacking html-xml-utils (7.7-1.1+b2) ...
Selecting previously unselected package libdevel-confess-perl.
Preparing to unpack .../30-libdevel-confess-perl_0.009004-4_all.deb ...
Unpacking libdevel-confess-perl (0.009004-4) ...
Selecting previously unselected package haskell-devscripts-minimal.
Preparing to unpack .../31-haskell-devscripts-minimal_0.16.33_all.deb ...
Unpacking haskell-devscripts-minimal (0.16.33) ...
Selecting previously unselected package libghc-colour-dev.
Preparing to unpack .../32-libghc-colour-dev_2.3.6-3_arm64.deb ...
Unpacking libghc-colour-dev (2.3.6-3) ...
Selecting previously unselected package libghc-ansi-terminal-types-dev.
Preparing to unpack .../33-libghc-ansi-terminal-types-dev_0.11.5-3_arm64.deb ...
Unpacking libghc-ansi-terminal-types-dev (0.11.5-3) ...
Selecting previously unselected package libghc-ansi-terminal-dev.
Preparing to unpack .../34-libghc-ansi-terminal-dev_1.0.2-1_arm64.deb ...
Unpacking libghc-ansi-terminal-dev (1.0.2-1) ...
Selecting previously unselected package libghc-colour-prof.
Preparing to unpack .../35-libghc-colour-prof_2.3.6-3_arm64.deb ...
Unpacking libghc-colour-prof (2.3.6-3) ...
Selecting previously unselected package libghc-ansi-terminal-types-prof.
Preparing to unpack .../36-libghc-ansi-terminal-types-prof_0.11.5-3_arm64.deb ...
Unpacking libghc-ansi-terminal-types-prof (0.11.5-3) ...
Selecting previously unselected package libghc-ansi-terminal-prof.
Preparing to unpack .../37-libghc-ansi-terminal-prof_1.0.2-1_arm64.deb ...
Unpacking libghc-ansi-terminal-prof (1.0.2-1) ...
Selecting previously unselected package libghc-statevar-dev.
Preparing to unpack .../38-libghc-statevar-dev_1.2.2-3_arm64.deb ...
Unpacking libghc-statevar-dev (1.2.2-3) ...
Selecting previously unselected package libghc-contravariant-dev.
Preparing to unpack .../39-libghc-contravariant-dev_1.5.5-3_arm64.deb ...
Unpacking libghc-contravariant-dev (1.5.5-3) ...
Selecting previously unselected package libghc-contravariant-doc.
Preparing to unpack .../40-libghc-contravariant-doc_1.5.5-3_all.deb ...
Unpacking libghc-contravariant-doc (1.5.5-3) ...
Selecting previously unselected package libghc-statevar-prof.
Preparing to unpack .../41-libghc-statevar-prof_1.2.2-3_arm64.deb ...
Unpacking libghc-statevar-prof (1.2.2-3) ...
Selecting previously unselected package libghc-contravariant-prof.
Preparing to unpack .../42-libghc-contravariant-prof_1.5.5-3_arm64.deb ...
Unpacking libghc-contravariant-prof (1.5.5-3) ...
Selecting previously unselected package libghc-prettyprinter-dev.
Preparing to unpack .../43-libghc-prettyprinter-dev_1.7.1-3_arm64.deb ...
Unpacking libghc-prettyprinter-dev (1.7.1-3) ...
Selecting previously unselected package libghc-prettyprinter-ansi-terminal-dev.
Preparing to unpack .../44-libghc-prettyprinter-ansi-terminal-dev_1.1.3-3_arm64.deb ...
Unpacking libghc-prettyprinter-ansi-terminal-dev (1.1.3-3) ...
Selecting previously unselected package libghc-prettyprinter-ansi-terminal-doc.
Preparing to unpack .../45-libghc-prettyprinter-ansi-terminal-doc_1.1.3-3_all.deb ...
Unpacking libghc-prettyprinter-ansi-terminal-doc (1.1.3-3) ...
Selecting previously unselected package libghc-prettyprinter-prof.
Preparing to unpack .../46-libghc-prettyprinter-prof_1.7.1-3_arm64.deb ...
Unpacking libghc-prettyprinter-prof (1.7.1-3) ...
Selecting previously unselected package libghc-prettyprinter-ansi-terminal-prof.
Preparing to unpack .../47-libghc-prettyprinter-ansi-terminal-prof_1.1.3-3_arm64.deb ...
Unpacking libghc-prettyprinter-ansi-terminal-prof (1.1.3-3) ...
Selecting previously unselected package libghc-prettyprinter-doc.
Preparing to unpack .../48-libghc-prettyprinter-doc_1.7.1-3_all.deb ...
Unpacking libghc-prettyprinter-doc (1.7.1-3) ...
Selecting previously unselected package sbuild-build-depends-main-dummy.
Preparing to unpack .../49-sbuild-build-depends-main-dummy_0.invalid.0_arm64.deb ...
Unpacking sbuild-build-depends-main-dummy (0.invalid.0) ...
Setting up media-types (10.1.0) ...
Setting up libfile-stripnondeterminism-perl (1.14.0-1) ...
Setting up fonts-mathjax (2.7.9+dfsg-1) ...
Setting up html-xml-utils (7.7-1.1+b2) ...
Setting up libjs-mathjax (2.7.9+dfsg-1) ...
Setting up libtirpc-common (1.3.4+ds-1.3) ...
Setting up po-debconf (1.0.21+nmu1) ...
Setting up libdebhelper-perl (13.20) ...
Setting up linux-libc-dev (6.11.7-1) ...
Setting up m4 (1.4.19-4) ...
Setting up libffi-dev:arm64 (3.4.6-1) ...
Setting up libfakeroot:arm64 (1.36-1) ...
Setting up libelf1t64:arm64 (0.192-4) ...
Setting up fakeroot (1.36-1) ...
update-alternatives: using /usr/bin/fakeroot-sysv to provide /usr/bin/fakeroot (fakeroot) in auto mode
Setting up autotools-dev (20220109.1) ...
Setting up libgmpxx4ldbl:arm64 (2:6.3.0+dfsg-2+b2) ...
Setting up rpcsvc-proto (1.4.3-1+b1) ...
Setting up libmpfr6:arm64 (4.2.1-1+b2) ...
Setting up libncurses6:arm64 (6.5-2+b1) ...
Setting up libmpc3:arm64 (1.3.1-1+b3) ...
Setting up autopoint (0.22.5-2) ...
Setting up libncursesw6:arm64 (6.5-2+b1) ...
Setting up autoconf (2.72-3) ...
Setting up libubsan1:arm64 (14.2.0-8) ...
Setting up dh-strip-nondeterminism (1.14.0-1) ...
Setting up libdevel-confess-perl (0.009004-4) ...
Setting up libnuma1:arm64 (2.0.18-1+b1) ...
Setting up dwz (0.15-1+b1) ...
Setting up libhwasan0:arm64 (14.2.0-8) ...
Setting up libcrypt-dev:arm64 (1:4.4.36-5) ...
Setting up libasan8:arm64 (14.2.0-8) ...
Setting up libmd-dev:arm64 (1.1.0-2+b1) ...
Setting up libtsan2:arm64 (14.2.0-8) ...
Setting up libisl23:arm64 (0.27-1) ...
Setting up libc-dev-bin (2.40-3) ...
Setting up libbsd-dev:arm64 (0.12.2-2) ...
Setting up libcc1-0:arm64 (14.2.0-8) ...
Setting up liblsan0:arm64 (14.2.0-8) ...
Setting up dctrl-tools (2.24-3+b1) ...
Setting up libitm1:arm64 (14.2.0-8) ...
Setting up automake (1:1.16.5-1.3) ...
update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode
Setting up libgmp-dev:arm64 (2:6.3.0+dfsg-2+b2) ...
Setting up libtirpc3t64:arm64 (1.3.4+ds-1.3+b1) ...
Setting up cpp-14-aarch64-linux-gnu (14.2.0-8) ...
Setting up libnsl2:arm64 (1.3.0-3+b3) ...
Setting up libc6-dev:arm64 (2.40-3) ...
Setting up libgcc-14-dev:arm64 (14.2.0-8) ...
Setting up libstdc++-14-dev:arm64 (14.2.0-8) ...
Setting up libncurses-dev:arm64 (6.5-2+b1) ...
Setting up libpython3.12-stdlib:arm64 (3.12.7-3) ...
Setting up python3.12 (3.12.7-3) ...
Setting up libnuma-dev:arm64 (2.0.18-1+b1) ...
Setting up cpp-aarch64-linux-gnu (4:14.2.0-1) ...
Setting up cpp-14 (14.2.0-8) ...
Setting up cpp (4:14.2.0-1) ...
Setting up gcc-14-aarch64-linux-gnu (14.2.0-8) ...
Setting up libpython3-stdlib:arm64 (3.12.7-1) ...
Setting up gcc-aarch64-linux-gnu (4:14.2.0-1) ...
Setting up g++-14-aarch64-linux-gnu (14.2.0-8) ...
Setting up python3 (3.12.7-1) ...
Setting up gcc-14 (14.2.0-8) ...
Setting up g++-aarch64-linux-gnu (4:14.2.0-1) ...
Setting up python3-scour (0.38.2-5) ...
Setting up g++-14 (14.2.0-8) ...
Setting up libtool (2.4.7-8) ...
Setting up gcc (4:14.2.0-1) ...
Setting up dh-autoreconf (20) ...
Setting up scour (0.38.2-5) ...
Setting up g++ (4:14.2.0-1) ...
update-alternatives: using /usr/bin/g++ to provide /usr/bin/c++ (c++) in auto mode
Setting up build-essential (12.12) ...
Setting up cdbs (0.4.166) ...
Setting up ghc (9.6.6-3) ...
update-alternatives: using /usr/bin/runghc to provide /usr/bin/runhaskell (runhaskell) in auto mode
update-alternatives: using /usr/bin/ghc to provide /usr/bin/haskell-compiler (haskell-compiler) in auto mode
Warning: include-dirs: /usr/lib/ghc/lib/../lib/aarch64-linux-ghc-9.6.6/directory-1.3.8.5/include doesn't exist or isn't a directory
Setting up libghc-prettyprinter-doc (1.7.1-3) ...
Setting up libghc-colour-dev (2.3.6-3) ...
Setting up debhelper (13.20) ...
Setting up ghc-doc (9.6.6-3) ...
Setting up libghc-prettyprinter-dev (1.7.1-3) ...
Setting up libghc-statevar-dev (1.2.2-3) ...
Setting up libghc-prettyprinter-ansi-terminal-doc (1.1.3-3) ...
Setting up dh-buildinfo (0.11+nmu3) ...
Setting up libghc-ansi-terminal-types-dev (0.11.5-3) ...
Setting up haskell-devscripts-minimal (0.16.33) ...
Setting up libghc-ansi-terminal-dev (1.0.2-1) ...
Setting up ghc-prof (9.6.6-3) ...
Setting up libghc-contravariant-doc (1.5.5-3) ...
Setting up libghc-prettyprinter-prof (1.7.1-3) ...
Setting up libghc-statevar-prof (1.2.2-3) ...
Setting up libghc-contravariant-dev (1.5.5-3) ...
Setting up libghc-colour-prof (2.3.6-3) ...
Setting up libghc-prettyprinter-ansi-terminal-dev (1.1.3-3) ...
Setting up libghc-ansi-terminal-types-prof (0.11.5-3) ...
Setting up libghc-contravariant-prof (1.5.5-3) ...
Setting up libghc-ansi-terminal-prof (1.0.2-1) ...
Setting up libghc-prettyprinter-ansi-terminal-prof (1.1.3-3) ...
Setting up sbuild-build-depends-main-dummy (0.invalid.0) ...
Processing triggers for man-db (2.13.0-1) ...
Processing triggers for libc-bin (2.40-3) ...
+------------------------------------------------------------------------------+
| Check architectures |
+------------------------------------------------------------------------------+
Arch check ok (arm64 included in any all)
+------------------------------------------------------------------------------+
| Build environment |
+------------------------------------------------------------------------------+
Kernel: Linux 6.1.0-27-cloud-arm64 #1 SMP Debian 6.1.115-1 (2024-11-01) arm64 (aarch64)
Toolchain package versions: binutils_2.43.1-5 dpkg-dev_1.22.12~1.gbp82cafd g++-14_14.2.0-8 gcc-14_14.2.0-8 libc6-dev_2.40-3 libstdc++-14-dev_14.2.0-8 libstdc++6_14.2.0-8 linux-libc-dev_6.11.7-1
Package versions: appstream_1.0.3-1+b1 apt_2.9.11 autoconf_2.72-3 automake_1:1.16.5-1.3 autopoint_0.22.5-2 autotools-dev_20220109.1 base-files_13.5 base-passwd_3.6.5 bash_5.2.32-1+b2 binutils_2.43.1-5 binutils-aarch64-linux-gnu_2.43.1-5 binutils-common_2.43.1-5 bsdextrautils_2.40.2-11 bsdutils_1:2.40.2-11 build-essential_12.12 bzip2_1.0.8-6 ca-certificates_20240203 cdbs_0.4.166 coreutils_9.5-1+b1 cpp_4:14.2.0-1 cpp-14_14.2.0-8 cpp-14-aarch64-linux-gnu_14.2.0-8 cpp-aarch64-linux-gnu_4:14.2.0-1 dash_0.5.12-9+b1 dctrl-tools_2.24-3+b1 debconf_1.5.87 debhelper_13.20 debian-archive-keyring_2023.4 debianutils_5.21 dh-autoreconf_20 dh-buildinfo_0.11+nmu3 dh-strip-nondeterminism_1.14.0-1 diffstat_1.66-1+b1 diffutils_1:3.10-1+b1 dpkg_1.22.12~1.gbp82cafd dpkg-dev_1.22.12~1.gbp82cafd dwz_0.15-1+b1 e2fsprogs_1.47.1-1+b1 fakeroot_1.36-1 file_1:5.45-3+b1 findutils_4.10.0-3 fonts-mathjax_2.7.9+dfsg-1 g++_4:14.2.0-1 g++-14_14.2.0-8 g++-14-aarch64-linux-gnu_14.2.0-8 g++-aarch64-linux-gnu_4:14.2.0-1 gcc_4:14.2.0-1 gcc-14_14.2.0-8 gcc-14-aarch64-linux-gnu_14.2.0-8 gcc-14-base_14.2.0-8 gcc-aarch64-linux-gnu_4:14.2.0-1 gettext_0.22.5-2 gettext-base_0.22.5-2 ghc_9.6.6-3 ghc-doc_9.6.6-3 ghc-prof_9.6.6-3 gpg_2.2.45-2 gpgconf_2.2.45-2 gpgv_2.2.45-2 grep_3.11-4+b1 groff-base_1.23.0-5 gzip_1.12-1.1+b1 haskell-devscripts-minimal_0.16.33 hostname_3.25 html-xml-utils_7.7-1.1+b2 init-system-helpers_1.67 intltool-debian_0.35.0+20060710.6 iso-codes_4.17.0-1 libacl1_2.3.2-2+b1 libaliased-perl_0.34-3 libappstream5_1.0.3-1+b1 libapt-pkg-perl_0.1.40+b6 libapt-pkg6.0t64_2.9.11 libarchive-zip-perl_1.68-1 libasan8_14.2.0-8 libassuan9_3.0.1-2 libatomic1_14.2.0-8 libattr1_1:2.5.2-2 libaudit-common_1:4.0.2-2 libaudit1_1:4.0.2-2 libb-hooks-endofscope-perl_0.28-1 libb-hooks-op-check-perl_0.22-3+b2 libberkeleydb-perl_0.66-1 libbinutils_2.43.1-5 libblkid1_2.40.2-11 libbrotli1_1.1.0-2+b6 libbsd-dev_0.12.2-2 libbsd0_0.12.2-2 libbz2-1.0_1.0.8-6 libc-bin_2.40-3 libc-dev-bin_2.40-3 libc6_2.40-3 libc6-dev_2.40-3 libcap-ng0_0.8.5-3+b1 libcap2_1:2.66-5+b1 libcapture-tiny-perl_0.48-2 libcc1-0_14.2.0-8 libcgi-pm-perl_4.66-1 libclass-data-inheritable-perl_0.10-1 libclass-inspector-perl_1.36-3 libclass-method-modifiers-perl_2.15-1 libclass-xsaccessor-perl_1.19-4+b4 libclone-perl_0.47-1+b1 libcom-err2_1.47.1-1+b1 libconfig-tiny-perl_2.30-1 libconst-fast-perl_0.014-2 libcpanel-json-xs-perl_4.38-1+b1 libcrypt-dev_1:4.4.36-5 libcrypt1_1:4.4.36-5 libctf-nobfd0_2.43.1-5 libctf0_2.43.1-5 libcurl3t64-gnutls_8.11.0-1 libdata-dpath-perl_0.60-1 libdata-messagepack-perl_1.02-1+b4 libdata-optlist-perl_0.114-1 libdata-validate-domain-perl_0.15-1 libdata-validate-ip-perl_0.31-1 libdata-validate-uri-perl_0.07-3 libdb5.3t64_5.3.28+dfsg2-9 libdebconfclient0_0.273 libdebhelper-perl_13.20 libdevel-callchecker-perl_0.009-1+b1 libdevel-confess-perl_0.009004-4 libdevel-size-perl_0.84-1+b1 libdevel-stacktrace-perl_2.0500-1 libdpkg-perl_1.22.12~1.gbp82cafd libdynaloader-functions-perl_0.004-1 libelf1t64_0.192-4 libemail-address-xs-perl_1.05-1+b4 libencode-locale-perl_1.05-3 libexception-class-perl_1.45-1 libexpat1_2.6.4-1 libext2fs2t64_1.47.1-1+b1 libfakeroot_1.36-1 libffi-dev_3.4.6-1 libffi8_3.4.6-1 libfile-basedir-perl_0.09-2 libfile-find-rule-perl_0.34-3 libfile-listing-perl_6.16-1 libfile-sharedir-perl_1.118-3 libfile-stripnondeterminism-perl_1.14.0-1 libfont-ttf-perl_1.06-2 libgcc-14-dev_14.2.0-8 libgcc-s1_14.2.0-8 libgcrypt20_1.11.0-6 libgdbm-compat4t64_1.24-2 libgdbm6t64_1.24-2 libghc-ansi-terminal-dev_1.0.2-1 libghc-ansi-terminal-prof_1.0.2-1 libghc-ansi-terminal-types-dev_0.11.5-3 libghc-ansi-terminal-types-prof_0.11.5-3 libghc-colour-dev_2.3.6-3 libghc-colour-prof_2.3.6-3 libghc-contravariant-dev_1.5.5-3 libghc-contravariant-doc_1.5.5-3 libghc-contravariant-prof_1.5.5-3 libghc-prettyprinter-ansi-terminal-dev_1.1.3-3 libghc-prettyprinter-ansi-terminal-doc_1.1.3-3 libghc-prettyprinter-ansi-terminal-prof_1.1.3-3 libghc-prettyprinter-dev_1.7.1-3 libghc-prettyprinter-doc_1.7.1-3 libghc-prettyprinter-prof_1.7.1-3 libghc-statevar-dev_1.2.2-3 libghc-statevar-prof_1.2.2-3 libglib2.0-0t64_2.82.2-3 libgmp-dev_2:6.3.0+dfsg-2+b2 libgmp10_2:6.3.0+dfsg-2+b2 libgmpxx4ldbl_2:6.3.0+dfsg-2+b2 libgnutls30t64_3.8.8-2 libgomp1_14.2.0-8 libgpg-error0_1.50-4 libgprofng0_2.43.1-5 libgssapi-krb5-2_1.21.3-3 libhogweed6t64_3.10-1+b1 libhtml-form-perl_6.12-1 libhtml-html5-entities-perl_0.004-3 libhtml-parser-perl_3.83-1+b1 libhtml-tagset-perl_3.24-1 libhtml-tokeparser-simple-perl_3.16-4 libhtml-tree-perl_5.07-3 libhttp-cookies-perl_6.11-1 libhttp-date-perl_6.06-1 libhttp-message-perl_7.00-2 libhttp-negotiate-perl_6.01-2 libhwasan0_14.2.0-8 libicu72_72.1-5+b1 libidn2-0_2.3.7-2+b1 libimport-into-perl_1.002005-2 libio-html-perl_1.004-3 libio-interactive-perl_1.025-1 libio-socket-ssl-perl_2.089-1 libio-string-perl_1.08-4 libipc-run3-perl_0.049-1 libipc-system-simple-perl_1.30-2 libisl23_0.27-1 libiterator-perl_0.03+ds1-2 libiterator-util-perl_0.02+ds1-2 libitm1_14.2.0-8 libjansson4_2.14-2+b3 libjs-mathjax_2.7.9+dfsg-1 libjson-maybexs-perl_1.004008-1 libk5crypto3_1.21.3-3 libkeyutils1_1.6.3-4 libkrb5-3_1.21.3-3 libkrb5support0_1.21.3-3 libldap-2.5-0_2.5.18+dfsg-3+b1 liblist-compare-perl_0.55-2 liblist-someutils-perl_0.59-1 liblist-utilsby-perl_0.12-2 liblsan0_14.2.0-8 liblwp-mediatypes-perl_6.04-2 liblwp-protocol-https-perl_6.14-1 liblz1_1.15~pre2-1 liblz4-1_1.9.4-3+b1 liblzma5_5.6.3-1+b1 liblzo2-2_2.10-3+b1 libmagic-mgc_1:5.45-3+b1 libmagic1t64_1:5.45-3+b1 libmarkdown2_2.2.7-2.1 libmd-dev_1.1.0-2+b1 libmd0_1.1.0-2+b1 libmldbm-perl_2.05-4 libmodule-implementation-perl_0.09-2 libmodule-runtime-perl_0.016-2 libmoo-perl_2.005005-1 libmoox-aliases-perl_0.001006-2 libmount1_2.40.2-11 libmouse-perl_2.5.11-1+b1 libmpc3_1.3.1-1+b3 libmpfr6_4.2.1-1+b2 libnamespace-clean-perl_0.27-2 libncurses-dev_6.5-2+b1 libncurses6_6.5-2+b1 libncursesw6_6.5-2+b1 libnet-domain-tld-perl_1.75-4 libnet-http-perl_6.23-1 libnet-ipv6addr-perl_1.02-1 libnet-netmask-perl_2.0002-2 libnet-ssleay-perl_1.94-2 libnetaddr-ip-perl_4.079+dfsg-2+b4 libnettle8t64_3.10-1+b1 libnghttp2-14_1.64.0-1 libnghttp3-9_1.4.0-1+b1 libngtcp2-16_1.6.0-1 libngtcp2-crypto-gnutls8_1.6.0-1 libnsl2_1.3.0-3+b3 libnuma-dev_2.0.18-1+b1 libnuma1_2.0.18-1+b1 libnumber-compare-perl_0.03-3 libp11-kit0_0.25.5-2+b1 libpackage-stash-perl_0.40-1 libpam-modules_1.5.3-7+b1 libpam-modules-bin_1.5.3-7+b1 libpam-runtime_1.5.3-7 libpam0g_1.5.3-7+b1 libparams-classify-perl_0.015-2+b4 libparams-util-perl_1.102-3+b1 libpath-tiny-perl_0.146-1 libpcre2-8-0_10.44-4 libperl5.40_5.40.0-7 libperlio-gzip-perl_0.20-1+b4 libperlio-utf8-strict-perl_0.010-1+b3 libpipeline1_1.5.8-1 libproc-processtable-perl_0.636-1+b3 libpsl5t64_0.21.2-1.1+b1 libpython3-stdlib_3.12.7-1 libpython3.12-minimal_3.12.7-3 libpython3.12-stdlib_3.12.7-3 libreadline8t64_8.2-5 libregexp-wildcards-perl_1.05-3 librole-tiny-perl_2.002004-1 librtmp1_2.4+20151223.gitfa8646d.1-2+b5 libsasl2-2_2.1.28+dfsg1-8 libsasl2-modules-db_2.1.28+dfsg1-8 libseccomp2_2.5.5-1+b3 libselinux1_3.7-3+b1 libsemanage-common_3.7-2 libsemanage2_3.7-2+b1 libsepol2_3.7-1 libsereal-decoder-perl_5.004+ds-1+b3 libsereal-encoder-perl_5.004+ds-1+b3 libsframe1_2.43.1-5 libsmartcols1_2.40.2-11 libsort-versions-perl_1.62-3 libsqlite3-0_3.46.1-1 libss2_1.47.1-1+b1 libssh2-1t64_1.11.1-1 libssl3t64_3.3.2-2 libstdc++-14-dev_14.2.0-8 libstdc++6_14.2.0-8 libstemmer0d_2.2.0-4+b2 libstrictures-perl_2.000006-1 libsub-exporter-perl_0.990-1 libsub-exporter-progressive-perl_0.001013-3 libsub-identify-perl_0.14-3+b3 libsub-install-perl_0.929-1 libsub-name-perl_0.27-1+b3 libsub-quote-perl_2.006008-1 libsyntax-keyword-try-perl_0.30-1+b1 libsystemd0_257~rc1-4 libtasn1-6_4.19.0-3+b3 libterm-readkey-perl_2.38-2+b4 libtext-glob-perl_0.11-3 libtext-levenshteinxs-perl_0.03-5+b4 libtext-markdown-discount-perl_0.16-1+b3 libtext-xslate-perl_3.5.9-2+b1 libtime-duration-perl_1.21-2 libtime-moment-perl_0.44-2+b4 libtimedate-perl_2.3300-2 libtinfo6_6.5-2+b1 libtirpc-common_1.3.4+ds-1.3 libtirpc3t64_1.3.4+ds-1.3+b1 libtool_2.4.7-8 libtry-tiny-perl_0.32-1 libtsan2_14.2.0-8 libubsan1_14.2.0-8 libuchardet0_0.0.8-1+b2 libudev1_257~rc1-4 libunicode-utf8-perl_0.62-2+b3 libunistring5_1.2-1+b1 liburi-perl_5.30-1 libuuid1_2.40.2-11 libvariable-magic-perl_0.64-1+b1 libwww-mechanize-perl_2.19-1 libwww-perl_6.77-1 libwww-robotrules-perl_6.02-1 libxml-libxml-perl_2.0207+dfsg+really+2.0134-5+b1 libxml-namespacesupport-perl_1.12-2 libxml-sax-base-perl_1.09-3 libxml-sax-perl_1.02+dfsg-3 libxml2_2.12.7+dfsg+really2.9.14-0.2+b1 libxmlb2_0.3.21-1 libxs-parse-keyword-perl_0.46-1+b1 libxxhash0_0.8.2-2+b2 libyaml-0-2_0.2.5-1+b2 libyaml-libyaml-perl_0.902.0+ds-2+b1 libzstd1_1.5.6+dfsg-1+b1 lintian_2.120.0 linux-libc-dev_6.11.7-1 login_1:4.16.0-2+really2.40.2-11 login.defs_1:4.16.0-5 logsave_1.47.1-1+b1 lzop_1.04-2+b1 m4_1.4.19-4 make_4.3-4.1+b1 man-db_2.13.0-1 mawk_1.3.4.20240905-1 media-types_10.1.0 mount_2.40.2-11 ncurses-base_6.5-2 ncurses-bin_6.5-2+b1 netbase_6.4 openssl_3.3.2-2 openssl-provider-legacy_3.3.2-2 passwd_1:4.16.0-5 patch_2.7.6-7+b1 patchutils_0.4.2-1+b1 perl_5.40.0-7 perl-base_5.40.0-7 perl-modules-5.40_5.40.0-7 perl-openssl-defaults_7+b2 plzip_1.11-2 po-debconf_1.0.21+nmu1 python3_3.12.7-1 python3-minimal_3.12.7-1 python3-scour_0.38.2-5 python3.12_3.12.7-3 python3.12-minimal_3.12.7-3 readline-common_8.2-5 rpcsvc-proto_1.4.3-1+b1 sbuild-build-depends-main-dummy_0.invalid.0 scour_0.38.2-5 sed_4.9-2+b1 sensible-utils_0.0.24 shared-mime-info_2.4-5+b1 sysvinit-utils_3.11-1 t1utils_1.41-4+b1 tar_1.35+dfsg-3+b1 tzdata_2024b-3 ucf_3.0043+nmu1 unzip_6.0-28+b1 util-linux_2.40.2-11 xz-utils_5.6.3-1+b1 zlib1g_1:1.3.dfsg+really1.3.1-1+b1
+------------------------------------------------------------------------------+
| Build |
+------------------------------------------------------------------------------+
Unpack source
-------------
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA512
Format: 3.0 (quilt)
Source: haskell-lumberjack
Binary: libghc-lumberjack-dev, libghc-lumberjack-prof, libghc-lumberjack-doc
Architecture: any all
Version: 1.0.3.0-2
Maintainer: Debian Haskell Group <pkg-haskell-maintainers@lists.alioth.debian.org>
Uploaders: Scott Talbert <swt@techie.net>
Homepage: https://github.com/GaloisInc/lumberjack
Standards-Version: 4.7.0
Vcs-Browser: https://salsa.debian.org/haskell-team/DHG_packages/tree/master/p/haskell-lumberjack
Vcs-Git: https://salsa.debian.org/haskell-team/DHG_packages.git [p/haskell-lumberjack]
Build-Depends: debhelper (>= 10), haskell-devscripts-minimal | haskell-devscripts (>= 0.13), cdbs, ghc (>= 9.4), ghc-prof, libghc-contravariant-dev (>= 1.5), libghc-contravariant-dev (<< 1.6), libghc-contravariant-prof, libghc-prettyprinter-dev (>= 1.6), libghc-prettyprinter-dev (<< 1.8), libghc-prettyprinter-prof, libghc-prettyprinter-ansi-terminal-dev (>= 1.1.1.2), libghc-prettyprinter-ansi-terminal-dev (<< 1.2), libghc-prettyprinter-ansi-terminal-prof
Build-Depends-Indep: ghc-doc, libghc-contravariant-doc, libghc-prettyprinter-doc, libghc-prettyprinter-ansi-terminal-doc
Package-List:
libghc-lumberjack-dev deb haskell optional arch=any
libghc-lumberjack-doc deb doc optional arch=all
libghc-lumberjack-prof deb haskell optional arch=any
Checksums-Sha1:
ad4a1af2130be4592a544f17b5cead4416a7e2c1 10745 haskell-lumberjack_1.0.3.0.orig.tar.gz
4d521e3819bbec5564e4f00e6fd7d80356f08f3e 2616 haskell-lumberjack_1.0.3.0-2.debian.tar.xz
Checksums-Sha256:
18458e37aeca5f2e294c0341662bc58dafe447e40e580f5666889043d87e4415 10745 haskell-lumberjack_1.0.3.0.orig.tar.gz
f34717a80295b87bb778ea8092d07954c5dbf99edc59956559b2865defcd4032 2616 haskell-lumberjack_1.0.3.0-2.debian.tar.xz
Files:
566d09b3e43ba480a4e5b0b2f99c94e2 10745 haskell-lumberjack_1.0.3.0.orig.tar.gz
aa91c13792021169292055e409203655 2616 haskell-lumberjack_1.0.3.0-2.debian.tar.xz
-----BEGIN PGP SIGNATURE-----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=D57W
-----END PGP SIGNATURE-----
gpgv: Signature made Fri Sep 20 06:19:10 2024 UTC
gpgv: using RSA key 27D73CA5F5B5D7E01A5136F5D7A86780CC64403C
gpgv: issuer "iliastsi@debian.org"
gpgv: Can't check signature: No public key
dpkg-source: warning: cannot verify inline signature for ./haskell-lumberjack_1.0.3.0-2.dsc: no acceptable signature found
dpkg-source: info: extracting haskell-lumberjack in /<<PKGBUILDDIR>>
dpkg-source: info: unpacking haskell-lumberjack_1.0.3.0.orig.tar.gz
dpkg-source: info: unpacking haskell-lumberjack_1.0.3.0-2.debian.tar.xz
Check disk space
----------------
Sufficient free space for build
User Environment
----------------
APT_CONFIG=/var/lib/sbuild/apt.conf
HOME=/sbuild-nonexistent
LANG=en_US.UTF-8
LC_ALL=C.UTF-8
LOGNAME=debusine-worker
PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games
SHELL=/bin/sh
USER=debusine-worker
dpkg-buildpackage
-----------------
Command: dpkg-buildpackage -us -uc -b -rfakeroot
dpkg-buildpackage: info: source package haskell-lumberjack
dpkg-buildpackage: info: source version 1.0.3.0-2
dpkg-buildpackage: info: source distribution unstable
dpkg-buildpackage: info: source changed by Ilias Tsitsimpis <iliastsi@debian.org>
dpkg-source --before-build .
dpkg-buildpackage: info: host architecture arm64
debian/rules clean
test -x debian/rules
dh_clean
perl -d:Confess -MDebian::Debhelper::Buildsystem::Haskell::Recipes=/.*/ \
-E 'clean_recipe'
Running rm -rf dist dist-ghc dist-ghcjs dist-hugs debian/tmp-setup-hs
Running rm -f debian/hlibrary.setup
Running rm -f Setup.hi Setup.ho Setup.o
Running rm -f
rm -f configure-ghc-stamp
rm -f build-ghc-stamp build-hugs-stamp build-haddock-stamp
rm -f check-ghc-stamp
rm -f debian/tmp
rm -rf debian/tmp-inst-ghc debian/tmp-inst-ghcjs
rm -rf debian/tmp-db
rm -f debian/hlibrary.Makefile
debian/rules binary
test -x debian/rules
dh_testroot
dh_prep
dh_installdirs -A
mkdir -p "."
CDBS WARNING: DEB_DH_STRIP_ARGS is deprecated since 0.4.85
CDBS WARNING: DEB_COMPRESS_EXCLUDE is deprecated since 0.4.85
Adding cdbs dependencies to debian/libghc-lumberjack-doc.substvars
dh_installdirs -plibghc-lumberjack-doc \
perl -d:Confess -MDebian::Debhelper::Buildsystem::Haskell::Recipes=/.*/ \
-E 'make_setup_recipe'
Running ghc --make Setup.hs -o debian/hlibrary.setup
[1 of 2] Compiling Main ( Setup.hs, Setup.o )
[2 of 2] Linking debian/hlibrary.setup
perl -d:Confess -MDebian::Debhelper::Buildsystem::Haskell::Recipes=/.*/ \
-E 'configure_recipe'
Running find . ! -newer /tmp/AMw4peSc1P -exec touch -d 1998-01-01 UTC {} ;
Running dh_listpackages
libghc-lumberjack-dev
libghc-lumberjack-prof
libghc-lumberjack-doc
Running dh_listpackages
libghc-lumberjack-dev
libghc-lumberjack-prof
libghc-lumberjack-doc
Running dpkg-buildflags --get LDFLAGS
-Wl,-z,relro
Running debian/hlibrary.setup configure --ghc -v2 --package-db=/var/lib/ghc/package.conf.d --prefix=/usr --libdir=/usr/lib/haskell-packages/ghc/lib --libexecdir=/usr/lib --builddir=dist-ghc --ghc-option=-optl-Wl,-z,relro --haddockdir=/usr/lib/ghc-doc/haddock/lumberjack-1.0.3.0/ --datasubdir=lumberjack --htmldir=/usr/share/doc/libghc-lumberjack-doc/html/ --enable-library-profiling --enable-tests
Using Parsec parser
Configuring lumberjack-1.0.3.0...
Dependency base >=4.11 && <4.19: using base-4.18.2.1
Dependency contravariant >=1.5 && <1.6: using contravariant-1.5.5
Dependency exceptions: using exceptions-0.10.7
Dependency prettyprinter >=1.6 && <1.8: using prettyprinter-1.7.1
Dependency prettyprinter-ansi-terminal >=1.1.1.2 && <1.2: using
prettyprinter-ansi-terminal-1.1.3
Dependency text: using text-2.0.2
Dependency time: using time-1.12.2
Dependency base: using base-4.18.2.1
Dependency contravariant: using contravariant-1.5.5
Dependency exceptions: using exceptions-0.10.7
Dependency lumberjack: using lumberjack-1.0.3.0
Dependency mtl: using mtl-2.3.1
Dependency prettyprinter: using prettyprinter-1.7.1
Dependency text: using text-2.0.2
Source component graph:
component lib
component exe:example_log dependency lib
Configured component graph:
component lumberjack-1.0.3.0-199utxy5HlO7szhqcDQCWs
include base-4.18.2.1
include contravariant-1.5.5-A7lal0hcJpG2Mk9fe5J59Z
include exceptions-0.10.7
include prettyprinter-1.7.1-CDxAO72IL6lFavjzsDUSDp
include prettyprinter-ansi-terminal-1.1.3-AnJ7IQBnD3Y5Snrea4tMeo
include text-2.0.2
include time-1.12.2
component lumberjack-1.0.3.0-2kbjZjLKKx8F2wvc9I6VOh-example_log
include base-4.18.2.1
include contravariant-1.5.5-A7lal0hcJpG2Mk9fe5J59Z
include exceptions-0.10.7
include lumberjack-1.0.3.0-199utxy5HlO7szhqcDQCWs
include mtl-2.3.1
include prettyprinter-1.7.1-CDxAO72IL6lFavjzsDUSDp
include text-2.0.2
Linked component graph:
unit lumberjack-1.0.3.0-199utxy5HlO7szhqcDQCWs
include base-4.18.2.1
include contravariant-1.5.5-A7lal0hcJpG2Mk9fe5J59Z
include exceptions-0.10.7
include prettyprinter-1.7.1-CDxAO72IL6lFavjzsDUSDp
include prettyprinter-ansi-terminal-1.1.3-AnJ7IQBnD3Y5Snrea4tMeo
include text-2.0.2
include time-1.12.2
Lumberjack=lumberjack-1.0.3.0-199utxy5HlO7szhqcDQCWs:Lumberjack
unit lumberjack-1.0.3.0-2kbjZjLKKx8F2wvc9I6VOh-example_log
include base-4.18.2.1
include contravariant-1.5.5-A7lal0hcJpG2Mk9fe5J59Z
include exceptions-0.10.7
include lumberjack-1.0.3.0-199utxy5HlO7szhqcDQCWs
include mtl-2.3.1
include prettyprinter-1.7.1-CDxAO72IL6lFavjzsDUSDp
include text-2.0.2
Ready component graph:
definite lumberjack-1.0.3.0-199utxy5HlO7szhqcDQCWs
depends base-4.18.2.1
depends contravariant-1.5.5-A7lal0hcJpG2Mk9fe5J59Z
depends exceptions-0.10.7
depends prettyprinter-1.7.1-CDxAO72IL6lFavjzsDUSDp
depends prettyprinter-ansi-terminal-1.1.3-AnJ7IQBnD3Y5Snrea4tMeo
depends text-2.0.2
depends time-1.12.2
definite lumberjack-1.0.3.0-2kbjZjLKKx8F2wvc9I6VOh-example_log
depends base-4.18.2.1
depends contravariant-1.5.5-A7lal0hcJpG2Mk9fe5J59Z
depends exceptions-0.10.7
depends lumberjack-1.0.3.0-199utxy5HlO7szhqcDQCWs
depends mtl-2.3.1
depends prettyprinter-1.7.1-CDxAO72IL6lFavjzsDUSDp
depends text-2.0.2
Using Cabal-3.10.3.0 compiled by ghc-9.6
Using compiler: ghc-9.6.6
Using install prefix: /usr
Executables installed in: /usr/bin
Libraries installed in:
/usr/lib/haskell-packages/ghc/lib/aarch64-linux-ghc-9.6.6/lumberjack-1.0.3.0-199utxy5HlO7szhqcDQCWs
Dynamic Libraries installed in:
/usr/lib/haskell-packages/ghc/lib/aarch64-linux-ghc-9.6.6
Private executables installed in:
/usr/lib/aarch64-linux-ghc-9.6.6/lumberjack-1.0.3.0
Data files installed in: /usr/share/lumberjack
Documentation installed in:
/usr/share/doc/aarch64-linux-ghc-9.6.6/lumberjack-1.0.3.0
Configuration files installed in: /usr/etc
No alex found
Using ar found on system at: /usr/bin/aarch64-linux-gnu-ar
No c2hs found
No cpphs found
No doctest found
Using gcc version 14 found on system at: /usr/bin/aarch64-linux-gnu-gcc
Using ghc version 9.6.6 found on system at: /usr/bin/ghc
Using ghc-pkg version 9.6.6 found on system at: /usr/bin/ghc-pkg-9.6.6
No ghcjs found
No ghcjs-pkg found
No greencard found
Using haddock version 2.29.2 found on system at: /usr/bin/haddock-ghc-9.6.6
No happy found
Using haskell-suite found on system at: haskell-suite-dummy-location
Using haskell-suite-pkg found on system at: haskell-suite-pkg-dummy-location
No hmake found
Using hpc version 0.68 found on system at: /usr/bin/hpc-ghc-9.6.6
Using hsc2hs version 0.68.9 found on system at: /usr/bin/hsc2hs-ghc-9.6.6
No hscolour found
No jhc found
Using ld found on system at: /usr/bin/aarch64-linux-gnu-ld
No pkg-config found
Using runghc version 9.6.6 found on system at: /usr/bin/runghc-9.6.6
Using strip version 2.43 found on system at: /usr/bin/strip
Using tar found on system at: /usr/bin/tar
No uhc found
touch configure-ghc-stamp
perl -d:Confess -MDebian::Debhelper::Buildsystem::Haskell::Recipes=/.*/ \
-E 'build_recipe'
Running dh_listpackages
libghc-lumberjack-dev
libghc-lumberjack-prof
libghc-lumberjack-doc
Preprocessing library for lumberjack-1.0.3.0..
Building library for lumberjack-1.0.3.0..
[1 of 1] Compiling Lumberjack ( src/Lumberjack.hs, dist-ghc/build/Lumberjack.o, dist-ghc/build/Lumberjack.dyn_o )
[1 of 1] Compiling Lumberjack ( src/Lumberjack.hs, dist-ghc/build/Lumberjack.p_o )
Preprocessing executable 'example_log' for lumberjack-1.0.3.0..
Building executable 'example_log' for lumberjack-1.0.3.0..
[1 of 1] Compiling Main ( example/ExampleLog.hs, dist-ghc/build/example_log/example_log-tmp/Main.o )
[2 of 2] Linking dist-ghc/build/example_log/example_log
touch build-ghc-stamp
perl -d:Confess -MDebian::Debhelper::Buildsystem::Haskell::Recipes=/.*/ \
-E 'check_recipe'
Running dh_listpackages
libghc-lumberjack-dev
libghc-lumberjack-prof
libghc-lumberjack-doc
Package has no test suites.
touch check-ghc-stamp
perl -d:Confess -MDebian::Debhelper::Buildsystem::Haskell::Recipes=/.*/ \
-E 'haddock_recipe'
Running dh_listpackages
libghc-lumberjack-dev
libghc-lumberjack-prof
libghc-lumberjack-doc
Running debian/hlibrary.setup haddock --builddir=dist-ghc --with-haddock=/usr/bin/haddock --with-ghc=ghc --verbose=2 --html --hoogle --haddock-options="--mathjax=file:///usr/share/javascript/mathjax/MathJax.js" --hyperlink-source
Running: /usr/bin/haddock --version
Running: /usr/bin/ghc --numeric-version
Running: /usr/bin/ghc --print-libdir
Running: /usr/bin/haddock --ghc-version '--mathjax=file:///usr/share/javascript/mathjax/MathJax.js'
Running: /usr/bin/ghc-pkg-9.6.6 init dist-ghc/package.conf.inplace
creating dist-ghc/build
creating dist-ghc/build/autogen
creating dist-ghc/build/autogen
creating dist-ghc/build/autogen
Preprocessing library for lumberjack-1.0.3.0..
Running Haddock on library for lumberjack-1.0.3.0..
creating dist-ghc/doc/html/lumberjack
creating dist-ghc/doc/html
creating dist-ghc/doc
creating dist-ghc/doc/html
creating dist-ghc/doc/html/lumberjack
Running: /usr/bin/haddock '@dist-ghc/doc/html/lumberjack/haddock-response495-1.txt' '--mathjax=file:///usr/share/javascript/mathjax/MathJax.js'
100% ( 31 / 31) in 'Lumberjack'
Documentation created: dist-ghc/doc/html/lumberjack/,
dist-ghc/doc/html/lumberjack/lumberjack.txt
Running: /usr/bin/ghc-pkg-9.6.6 recache '--package-db=dist-ghc/package.conf.inplace'
creating dist-ghc/build/example_log
creating dist-ghc/build/example_log/autogen
creating dist-ghc/build/example_log/autogen
creating dist-ghc/build/example_log/autogen
Preprocessing executable 'example_log' for lumberjack-1.0.3.0..
touch build-haddock-stamp
perl -d:Confess -MDebian::Debhelper::Buildsystem::Haskell::Recipes=/.*/ \
-E 'install_recipe($ARGV[0])' "debian/tmp-inst-ghc"
Running dh_listpackages
libghc-lumberjack-dev
libghc-lumberjack-prof
libghc-lumberjack-doc
Running debian/hlibrary.setup copy --builddir=dist-ghc --destdir=debian/tmp-inst-ghc
Installing library in debian/tmp-inst-ghc/usr/lib/haskell-packages/ghc/lib/aarch64-linux-ghc-9.6.6/lumberjack-1.0.3.0-199utxy5HlO7szhqcDQCWs
Installing executable example_log in debian/tmp-inst-ghc/usr/bin
ln --symbolic --force "debian/tmp-inst-ghc" debian/tmp
:
dh_haskell_install_htmldocs --package=libghc-lumberjack-doc --source-dir="debian/tmp-inst-ghc"
Running find ./usr/share/doc/libghc-lumberjack-doc/html/ ! -name *.haddock ! -type d -exec install -D --mode=644 {} /<<PKGBUILDDIR>>/debian/libghc-lumberjack-doc/{} ;
Running mkdir --parents debian/libghc-lumberjack-doc/usr/lib/ghc-doc/hoogle
Running ln --symbolic --relative --no-target-directory debian/libghc-lumberjack-doc/usr/share/doc/libghc-lumberjack-doc/html//lumberjack.txt debian/libghc-lumberjack-doc/usr/lib/ghc-doc/hoogle/libghc-lumberjack-doc.txt
dh_haskell_install_haddock --package=libghc-lumberjack-doc --source-dir="debian/tmp-inst-ghc"
Running mkdir --parents debian/libghc-lumberjack-doc/usr/lib/ghc-doc/haddock/lumberjack-1.0.3.0/
Running cp --recursive debian/tmp-inst-ghc/usr/lib/ghc-doc/haddock/lumberjack-1.0.3.0/lumberjack.haddock debian/libghc-lumberjack-doc/usr/lib/ghc-doc/haddock/lumberjack-1.0.3.0/
dh_haskell_depends_haddock --package=libghc-lumberjack-doc
Running haddock --interface-version
42
dh_haskell_recommends_documentation_references --package=libghc-lumberjack-doc
Finding all links in the documentation in installable libghc-lumberjack-doc.
dh_haskell_suggests --package=libghc-lumberjack-doc
dh_haskell_blurbs --package=libghc-lumberjack-doc --type=doc
dh_haskell_description --package=libghc-lumberjack-doc
Running grep-dctrl --no-field-names --show-field=Description --field=Source --regex .* debian/control
Running grep-dctrl --no-field-names --show-field=X-Description --field=Source --regex .* debian/control
Trek through your code forest and make logs
This is a logging facility. Yes, there are many, and this is the one
with a beard, wearing flannel and boots, that gets the job done. It's
not the fanciest, it doesn't have a cargo-van full of features. This
logger is designed to be straightforward to use, provide a good set of
standard features, and be useable across a broad set of code.
.
* Logging itself is a monadic activity. This activity is most often
performed in a monad stack with a MonadIO context to allow
writing to files.
.
* The specific logging action implementations are managed separately
from the actions of logging messages in the target code. This
allows logging to be configurable and the manner of logging to
be specified at startup time without requiring changes in the
code from which log messages are being generated.
.
* The logging implementation code can use contravariant functors to
adjust existing logging.
.
* Main code will typically retrieve the logging actions from a Reader
context in your monad stack. That said, Log actions are not tied
to an enclosing Monad. There are helpers to support a Monad which
can store Log actions, but Log actions can also be explicitly
passed and used.
.
* The prettyprinter package is used for formatting.
dh_haskell_compiler --package=libghc-lumberjack-doc
Running dpkg-query --showformat=${Version} --show ghc
9.6.6-3
dh_installdocs -plibghc-lumberjack-doc
dh_installexamples -plibghc-lumberjack-doc
dh_installman -plibghc-lumberjack-doc
dh_installinfo -plibghc-lumberjack-doc
dh_installmenu -plibghc-lumberjack-doc
dh_installcron -plibghc-lumberjack-doc
dh_systemd_enable -plibghc-lumberjack-doc
dh_installinit -plibghc-lumberjack-doc
dh_installdebconf -plibghc-lumberjack-doc
dh_installemacsen -plibghc-lumberjack-doc
dh_installcatalogs -plibghc-lumberjack-doc
dh_installpam -plibghc-lumberjack-doc
dh_installlogrotate -plibghc-lumberjack-doc
dh_installlogcheck -plibghc-lumberjack-doc
dh_installchangelogs -plibghc-lumberjack-doc
dh_installudev -plibghc-lumberjack-doc
dh_lintian -plibghc-lumberjack-doc
dh_bugfiles -plibghc-lumberjack-doc
dh_install -plibghc-lumberjack-doc
dh_systemd_start -plibghc-lumberjack-doc
dh_link -plibghc-lumberjack-doc
dh_buildinfo -plibghc-lumberjack-doc
dh_installmime -plibghc-lumberjack-doc
dh_installgsettings -plibghc-lumberjack-doc
dh_strip -plibghc-lumberjack-doc --no-automatic-dbgsym
dh_strip_nondeterminism -plibghc-lumberjack-doc
dh_compress -plibghc-lumberjack-doc -X .haddock -X .hs -X .txt
dh_fixperms -plibghc-lumberjack-doc
dh_makeshlibs -plibghc-lumberjack-doc -XlibHS
dh_installdeb -plibghc-lumberjack-doc
dh_perl -plibghc-lumberjack-doc
dh_shlibdeps -plibghc-lumberjack-doc -- --ignore-missing-info
dh_gencontrol -plibghc-lumberjack-doc
dpkg-gencontrol: warning: Conflicts field of package libghc-lumberjack-doc: substitution variable ${haskell:Conflicts} used, but is not defined
dpkg-gencontrol: warning: package libghc-lumberjack-doc: substitution variable ${haskell:ghc-version} unused, but is defined
# only call dh_scour for packages in main
if grep -q '^Component:[[:space:]]*main' /CurrentlyBuilding 2>/dev/null; then dh_scour -plibghc-lumberjack-doc ; fi
dh_md5sums -plibghc-lumberjack-doc
dh_builddeb -plibghc-lumberjack-doc
dpkg-deb: building package 'libghc-lumberjack-doc' in '../libghc-lumberjack-doc_1.0.3.0-2_all.deb'.
Adding cdbs dependencies to debian/libghc-lumberjack-dev.substvars
dh_installdirs -plibghc-lumberjack-dev \
:
dh_haskell_install_ghc_registration --package=libghc-lumberjack-dev
Running install -D --mode=644 lumberjack-1.0.3.0.conf debian/libghc-lumberjack-dev/var/lib/ghc/package.conf.d/lumberjack-1.0.3.0.conf
Running: /usr/bin/ghc --abi-hash -fbuilding-cabal-package -O -outputdir dist-ghc/build -odir dist-ghc/build -hidir dist-ghc/build -stubdir dist-ghc/build -i -idist-ghc/build -isrc -idist-ghc/build/autogen -idist-ghc/build/global-autogen -Idist-ghc/build/autogen -Idist-ghc/build/global-autogen -Idist-ghc/build -optP-include -optPdist-ghc/build/autogen/cabal_macros.h -this-unit-id lumberjack-1.0.3.0-199utxy5HlO7szhqcDQCWs -hide-all-packages -Wmissing-home-modules -no-user-package-db -package-db /var/lib/ghc/package.conf.d -package-db dist-ghc/package.conf.inplace -package-id base-4.18.2.1 -package-id contravariant-1.5.5-A7lal0hcJpG2Mk9fe5J59Z -package-id exceptions-0.10.7 -package-id prettyprinter-1.7.1-CDxAO72IL6lFavjzsDUSDp -package-id prettyprinter-ansi-terminal-1.1.3-AnJ7IQBnD3Y5Snrea4tMeo -package-id text-2.0.2 -package-id time-1.12.2 -XHaskell2010 Lumberjack -optl-Wl,-z,relro
name: lumberjack
version: 1.0.3.0
visibility: public
id: lumberjack-1.0.3.0-199utxy5HlO7szhqcDQCWs
key: lumberjack-1.0.3.0-199utxy5HlO7szhqcDQCWs
license: ISC
copyright: 2020-2022, Galois Inc.
maintainer: kquick@galois.com
author: Kevin Quick
homepage: https://github.com/GaloisInc/lumberjack
synopsis: Trek through your code forest and make logs
description:
This is a logging facility. Yes, there are many, and this is the one
with a beard, wearing flannel and boots, that gets the job done. It's
not the fanciest, it doesn't have a cargo-van full of features. This
logger is designed to be straightforward to use, provide a good set of
standard features, and be useable across a broad set of code.
* Logging itself is a monadic activity. This activity is most often
performed in a monad stack with a MonadIO context to allow
writing to files.
* The specific logging action implementations are managed separately
from the actions of logging messages in the target code. This
allows logging to be configurable and the manner of logging to
be specified at startup time without requiring changes in the
code from which log messages are being generated.
* The logging implementation code can use contravariant functors to
adjust existing logging.
* Main code will typically retrieve the logging actions from a Reader
context in your monad stack. That said, Log actions are not tied
to an enclosing Monad. There are helpers to support a Monad which
can store Log actions, but Log actions can also be explicitly
passed and used.
* The prettyprinter package is used for formatting.
category: Logging
abi: 661d5585baa89de5c827dc9648e5a6bc
exposed: True
exposed-modules: Lumberjack
import-dirs:
/usr/lib/haskell-packages/ghc/lib/aarch64-linux-ghc-9.6.6/lumberjack-1.0.3.0-199utxy5HlO7szhqcDQCWs
library-dirs:
/usr/lib/haskell-packages/ghc/lib/aarch64-linux-ghc-9.6.6/lumberjack-1.0.3.0-199utxy5HlO7szhqcDQCWs
library-dirs-static:
/usr/lib/haskell-packages/ghc/lib/aarch64-linux-ghc-9.6.6/lumberjack-1.0.3.0-199utxy5HlO7szhqcDQCWs
dynamic-library-dirs: /usr/lib/haskell-packages/ghc/lib/aarch64-linux-ghc-9.6.6
data-dir: /usr/share/lumberjack
hs-libraries: HSlumberjack-1.0.3.0-199utxy5HlO7szhqcDQCWs
depends:
base-4.18.2.1 contravariant-1.5.5-A7lal0hcJpG2Mk9fe5J59Z
exceptions-0.10.7 prettyprinter-1.7.1-CDxAO72IL6lFavjzsDUSDp
prettyprinter-ansi-terminal-1.1.3-AnJ7IQBnD3Y5Snrea4tMeo text-2.0.2
time-1.12.2
haddock-interfaces:
/usr/lib/ghc-doc/haddock/lumberjack-1.0.3.0/lumberjack.haddock
haddock-html: /usr/share/doc/libghc-lumberjack-doc/html/
Creating package registration file: lumberjack-1.0.3.0.conf
Running rm -rf lumberjack-1.0.3.0.conf
dh_haskell_install_development_libs --package=libghc-lumberjack-dev --source-dir="debian/tmp-inst-ghc"
Running find ./usr/lib/haskell-packages/ghc/lib ( ! -name *_p.a ! -name *.p_hi ! -type d ) -exec install -D --mode=644 {} /<<PKGBUILDDIR>>/debian/libghc-lumberjack-dev/{} ;
dh_haskell_provides_ghc --package=libghc-lumberjack-dev
Running cp debian/libghc-lumberjack-dev/var/lib/ghc/package.conf.d/lumberjack-1.0.3.0.conf debian/tmp-db
Running ghc-pkg --package-db debian/tmp-db recache
Running ghc-pkg --package-db debian/tmp-db --simple-output field lumberjack-1.0.3.0 id
lumberjack-1.0.3.0-199utxy5HlO7szhqcDQCWs
Running ghc-pkg --package-db debian/tmp-db --simple-output --unit-id field lumberjack-1.0.3.0-199utxy5HlO7szhqcDQCWs name
lumberjack
Running ghc-pkg --package-db debian/tmp-db --simple-output --unit-id field lumberjack-1.0.3.0-199utxy5HlO7szhqcDQCWs version
1.0.3.0
Running ghc-pkg --package-db debian/tmp-db --simple-output --unit-id field lumberjack-1.0.3.0-199utxy5HlO7szhqcDQCWs abi
661d5585baa89de5c827dc9648e5a6bc
dh_haskell_depends_cabal --package=libghc-lumberjack-dev
Running cp debian/libghc-lumberjack-dev/var/lib/ghc/package.conf.d/lumberjack-1.0.3.0.conf debian/tmp-db
Running ghc-pkg --package-db debian/tmp-db recache
Running ghc-pkg --package-db debian/tmp-db --simple-output field lumberjack-1.0.3.0 depends
base-4.18.2.1 contravariant-1.5.5-A7lal0hcJpG2Mk9fe5J59Z exceptions-0.10.7 prettyprinter-1.7.1-CDxAO72IL6lFavjzsDUSDp prettyprinter-ansi-terminal-1.1.3-AnJ7IQBnD3Y5Snrea4tMeo text-2.0.2 time-1.12.2
Running ghc-pkg --global --simple-output --unit-id field base-4.18.2.1 name
base
Running ghc-pkg --global --simple-output --unit-id field base-4.18.2.1 version
4.18.2.1
Running ghc-pkg --global --simple-output --unit-id field base-4.18.2.1 abi
75247e98224aa00276c5a55902026a85
Running ghc-pkg --global --simple-output --unit-id field contravariant-1.5.5-A7lal0hcJpG2Mk9fe5J59Z name
contravariant
Running ghc-pkg --global --simple-output --unit-id field contravariant-1.5.5-A7lal0hcJpG2Mk9fe5J59Z version
1.5.5
Running ghc-pkg --global --simple-output --unit-id field contravariant-1.5.5-A7lal0hcJpG2Mk9fe5J59Z abi
beebf2210ea06f9cfa4ee9954e9aa746
Running ghc-pkg --global --simple-output --unit-id field exceptions-0.10.7 name
exceptions
Running ghc-pkg --global --simple-output --unit-id field exceptions-0.10.7 version
0.10.7
Running ghc-pkg --global --simple-output --unit-id field exceptions-0.10.7 abi
fdf92d45d6b051cadaf424b141bc972d
Running ghc-pkg --global --simple-output --unit-id field prettyprinter-1.7.1-CDxAO72IL6lFavjzsDUSDp name
prettyprinter
Running ghc-pkg --global --simple-output --unit-id field prettyprinter-1.7.1-CDxAO72IL6lFavjzsDUSDp version
1.7.1
Running ghc-pkg --global --simple-output --unit-id field prettyprinter-1.7.1-CDxAO72IL6lFavjzsDUSDp abi
8f1cb1125463aae40eafbcac9bec82a6
Running ghc-pkg --global --simple-output --unit-id field prettyprinter-ansi-terminal-1.1.3-AnJ7IQBnD3Y5Snrea4tMeo name
prettyprinter-ansi-terminal
Running ghc-pkg --global --simple-output --unit-id field prettyprinter-ansi-terminal-1.1.3-AnJ7IQBnD3Y5Snrea4tMeo version
1.1.3
Running ghc-pkg --global --simple-output --unit-id field prettyprinter-ansi-terminal-1.1.3-AnJ7IQBnD3Y5Snrea4tMeo abi
fa00a8e4f020fb3d4da22a0b1b3bb953
Running ghc-pkg --global --simple-output --unit-id field text-2.0.2 name
text
Running ghc-pkg --global --simple-output --unit-id field text-2.0.2 version
2.0.2
Running ghc-pkg --global --simple-output --unit-id field text-2.0.2 abi
edcc74d46bc3b20600110db51c75c238
Running ghc-pkg --global --simple-output --unit-id field time-1.12.2 name
time
Running ghc-pkg --global --simple-output --unit-id field time-1.12.2 version
1.12.2
Running ghc-pkg --global --simple-output --unit-id field time-1.12.2 abi
a9cccb66c0a7c723756ecc7e2162f4b4
dh_haskell_extra_depends_ghc --package=libghc-lumberjack-dev --type=dev
Running cp lumberjack-1.0.3.0.conf debian/tmp-db
Running: /usr/bin/ghc --abi-hash -fbuilding-cabal-package -O -outputdir dist-ghc/build -odir dist-ghc/build -hidir dist-ghc/build -stubdir dist-ghc/build -i -idist-ghc/build -isrc -idist-ghc/build/autogen -idist-ghc/build/global-autogen -Idist-ghc/build/autogen -Idist-ghc/build/global-autogen -Idist-ghc/build -optP-include -optPdist-ghc/build/autogen/cabal_macros.h -this-unit-id lumberjack-1.0.3.0-199utxy5HlO7szhqcDQCWs -hide-all-packages -Wmissing-home-modules -no-user-package-db -package-db /var/lib/ghc/package.conf.d -package-db dist-ghc/package.conf.inplace -package-id base-4.18.2.1 -package-id contravariant-1.5.5-A7lal0hcJpG2Mk9fe5J59Z -package-id exceptions-0.10.7 -package-id prettyprinter-1.7.1-CDxAO72IL6lFavjzsDUSDp -package-id prettyprinter-ansi-terminal-1.1.3-AnJ7IQBnD3Y5Snrea4tMeo -package-id text-2.0.2 -package-id time-1.12.2 -XHaskell2010 Lumberjack -optl-Wl,-z,relro
name: lumberjack
version: 1.0.3.0
visibility: public
id: lumberjack-1.0.3.0-199utxy5HlO7szhqcDQCWs
key: lumberjack-1.0.3.0-199utxy5HlO7szhqcDQCWs
license: ISC
copyright: 2020-2022, Galois Inc.
maintainer: kquick@galois.com
author: Kevin Quick
homepage: https://github.com/GaloisInc/lumberjack
synopsis: Trek through your code forest and make logs
description:
This is a logging facility. Yes, there are many, and this is the one
with a beard, wearing flannel and boots, that gets the job done. It's
not the fanciest, it doesn't have a cargo-van full of features. This
logger is designed to be straightforward to use, provide a good set of
standard features, and be useable across a broad set of code.
* Logging itself is a monadic activity. This activity is most often
performed in a monad stack with a MonadIO context to allow
writing to files.
* The specific logging action implementations are managed separately
from the actions of logging messages in the target code. This
allows logging to be configurable and the manner of logging to
be specified at startup time without requiring changes in the
code from which log messages are being generated.
* The logging implementation code can use contravariant functors to
adjust existing logging.
* Main code will typically retrieve the logging actions from a Reader
context in your monad stack. That said, Log actions are not tied
to an enclosing Monad. There are helpers to support a Monad which
can store Log actions, but Log actions can also be explicitly
passed and used.
* The prettyprinter package is used for formatting.
category: Logging
abi: 661d5585baa89de5c827dc9648e5a6bc
exposed: True
exposed-modules: Lumberjack
import-dirs:
/usr/lib/haskell-packages/ghc/lib/aarch64-linux-ghc-9.6.6/lumberjack-1.0.3.0-199utxy5HlO7szhqcDQCWs
library-dirs:
/usr/lib/haskell-packages/ghc/lib/aarch64-linux-ghc-9.6.6/lumberjack-1.0.3.0-199utxy5HlO7szhqcDQCWs
library-dirs-static:
/usr/lib/haskell-packages/ghc/lib/aarch64-linux-ghc-9.6.6/lumberjack-1.0.3.0-199utxy5HlO7szhqcDQCWs
dynamic-library-dirs: /usr/lib/haskell-packages/ghc/lib/aarch64-linux-ghc-9.6.6
data-dir: /usr/share/lumberjack
hs-libraries: HSlumberjack-1.0.3.0-199utxy5HlO7szhqcDQCWs
depends:
base-4.18.2.1 contravariant-1.5.5-A7lal0hcJpG2Mk9fe5J59Z
exceptions-0.10.7 prettyprinter-1.7.1-CDxAO72IL6lFavjzsDUSDp
prettyprinter-ansi-terminal-1.1.3-AnJ7IQBnD3Y5Snrea4tMeo text-2.0.2
time-1.12.2
haddock-interfaces:
/usr/lib/ghc-doc/haddock/lumberjack-1.0.3.0/lumberjack.haddock
haddock-html: /usr/share/doc/libghc-lumberjack-doc/html/
Creating package registration file: lumberjack-1.0.3.0.conf
Running ghc-pkg --package-db debian/tmp-db recache
Running ghc-pkg --package-db debian/tmp-db --simple-output field lumberjack-1.0.3.0 depends
base-4.18.2.1 contravariant-1.5.5-A7lal0hcJpG2Mk9fe5J59Z exceptions-0.10.7 prettyprinter-1.7.1-CDxAO72IL6lFavjzsDUSDp prettyprinter-ansi-terminal-1.1.3-AnJ7IQBnD3Y5Snrea4tMeo text-2.0.2 time-1.12.2
Running rm -rf lumberjack-1.0.3.0.conf
dh_haskell_shlibdeps --package=libghc-lumberjack-dev
Running cp debian/libghc-lumberjack-dev/var/lib/ghc/package.conf.d/lumberjack-1.0.3.0.conf debian/tmp-db
Running ghc-pkg --package-db debian/tmp-db recache
Running ghc-pkg --package-db debian/tmp-db --simple-output field lumberjack-1.0.3.0 library-dirs
/usr/lib/haskell-packages/ghc/lib/aarch64-linux-ghc-9.6.6/lumberjack-1.0.3.0-199utxy5HlO7szhqcDQCWs
Running ghc-pkg --package-db debian/tmp-db --simple-output field lumberjack-1.0.3.0 extra-libraries
Running gcc -L/usr/lib/haskell-packages/ghc/lib/aarch64-linux-ghc-9.6.6/lumberjack-1.0.3.0-199utxy5HlO7szhqcDQCWs debian/dh_haskell_shlibdeps/probe.c -o debian/dh_haskell_shlibdeps/probe
Running dpkg-shlibdeps --warnings=1 -Tdebian/libghc-lumberjack-dev.substvars debian/dh_haskell_shlibdeps/probe
dh_haskell_blurbs --package=libghc-lumberjack-dev --type=dev
dh_haskell_description --package=libghc-lumberjack-dev
Running grep-dctrl --no-field-names --show-field=Description --field=Source --regex .* debian/control
Running grep-dctrl --no-field-names --show-field=X-Description --field=Source --regex .* debian/control
Trek through your code forest and make logs
This is a logging facility. Yes, there are many, and this is the one
with a beard, wearing flannel and boots, that gets the job done. It's
not the fanciest, it doesn't have a cargo-van full of features. This
logger is designed to be straightforward to use, provide a good set of
standard features, and be useable across a broad set of code.
.
* Logging itself is a monadic activity. This activity is most often
performed in a monad stack with a MonadIO context to allow
writing to files.
.
* The specific logging action implementations are managed separately
from the actions of logging messages in the target code. This
allows logging to be configurable and the manner of logging to
be specified at startup time without requiring changes in the
code from which log messages are being generated.
.
* The logging implementation code can use contravariant functors to
adjust existing logging.
.
* Main code will typically retrieve the logging actions from a Reader
context in your monad stack. That said, Log actions are not tied
to an enclosing Monad. There are helpers to support a Monad which
can store Log actions, but Log actions can also be explicitly
passed and used.
.
* The prettyprinter package is used for formatting.
dh_haskell_compiler --package=libghc-lumberjack-dev
Running dpkg-query --showformat=${Version} --show ghc
9.6.6-3
Adding cdbs dependencies to debian/libghc-lumberjack-prof.substvars
dh_installdirs -plibghc-lumberjack-prof \
dh_haskell_install_profiling_libs --package=libghc-lumberjack-prof --source-dir="debian/tmp-inst-ghc"
Running find ./usr/lib/haskell-packages/ghc/lib ( -name *_p.a -o -name *.p_hi ) -exec install -D --mode=644 {} /<<PKGBUILDDIR>>/debian/libghc-lumberjack-prof/{} ;
dh_haskell_provides_ghc --package=libghc-lumberjack-prof --config-shipper="libghc-lumberjack-dev"
Running cp debian/libghc-lumberjack-dev/var/lib/ghc/package.conf.d/lumberjack-1.0.3.0.conf debian/tmp-db
Running ghc-pkg --package-db debian/tmp-db recache
Running ghc-pkg --package-db debian/tmp-db --simple-output field lumberjack-1.0.3.0 id
lumberjack-1.0.3.0-199utxy5HlO7szhqcDQCWs
Running ghc-pkg --package-db debian/tmp-db --simple-output --unit-id field lumberjack-1.0.3.0-199utxy5HlO7szhqcDQCWs name
lumberjack
Running ghc-pkg --package-db debian/tmp-db --simple-output --unit-id field lumberjack-1.0.3.0-199utxy5HlO7szhqcDQCWs version
1.0.3.0
Running ghc-pkg --package-db debian/tmp-db --simple-output --unit-id field lumberjack-1.0.3.0-199utxy5HlO7szhqcDQCWs abi
661d5585baa89de5c827dc9648e5a6bc
dh_haskell_depends_cabal --package=libghc-lumberjack-prof --config-shipper="libghc-lumberjack-dev"
Running cp debian/libghc-lumberjack-dev/var/lib/ghc/package.conf.d/lumberjack-1.0.3.0.conf debian/tmp-db
Running ghc-pkg --package-db debian/tmp-db recache
Running ghc-pkg --package-db debian/tmp-db --simple-output field lumberjack-1.0.3.0 depends
base-4.18.2.1 contravariant-1.5.5-A7lal0hcJpG2Mk9fe5J59Z exceptions-0.10.7 prettyprinter-1.7.1-CDxAO72IL6lFavjzsDUSDp prettyprinter-ansi-terminal-1.1.3-AnJ7IQBnD3Y5Snrea4tMeo text-2.0.2 time-1.12.2
Running ghc-pkg --global --simple-output --unit-id field base-4.18.2.1 name
base
Running ghc-pkg --global --simple-output --unit-id field base-4.18.2.1 version
4.18.2.1
Running ghc-pkg --global --simple-output --unit-id field base-4.18.2.1 abi
75247e98224aa00276c5a55902026a85
Running ghc-pkg --global --simple-output --unit-id field contravariant-1.5.5-A7lal0hcJpG2Mk9fe5J59Z name
contravariant
Running ghc-pkg --global --simple-output --unit-id field contravariant-1.5.5-A7lal0hcJpG2Mk9fe5J59Z version
1.5.5
Running ghc-pkg --global --simple-output --unit-id field contravariant-1.5.5-A7lal0hcJpG2Mk9fe5J59Z abi
beebf2210ea06f9cfa4ee9954e9aa746
Running ghc-pkg --global --simple-output --unit-id field exceptions-0.10.7 name
exceptions
Running ghc-pkg --global --simple-output --unit-id field exceptions-0.10.7 version
0.10.7
Running ghc-pkg --global --simple-output --unit-id field exceptions-0.10.7 abi
fdf92d45d6b051cadaf424b141bc972d
Running ghc-pkg --global --simple-output --unit-id field prettyprinter-1.7.1-CDxAO72IL6lFavjzsDUSDp name
prettyprinter
Running ghc-pkg --global --simple-output --unit-id field prettyprinter-1.7.1-CDxAO72IL6lFavjzsDUSDp version
1.7.1
Running ghc-pkg --global --simple-output --unit-id field prettyprinter-1.7.1-CDxAO72IL6lFavjzsDUSDp abi
8f1cb1125463aae40eafbcac9bec82a6
Running ghc-pkg --global --simple-output --unit-id field prettyprinter-ansi-terminal-1.1.3-AnJ7IQBnD3Y5Snrea4tMeo name
prettyprinter-ansi-terminal
Running ghc-pkg --global --simple-output --unit-id field prettyprinter-ansi-terminal-1.1.3-AnJ7IQBnD3Y5Snrea4tMeo version
1.1.3
Running ghc-pkg --global --simple-output --unit-id field prettyprinter-ansi-terminal-1.1.3-AnJ7IQBnD3Y5Snrea4tMeo abi
fa00a8e4f020fb3d4da22a0b1b3bb953
Running ghc-pkg --global --simple-output --unit-id field text-2.0.2 name
text
Running ghc-pkg --global --simple-output --unit-id field text-2.0.2 version
2.0.2
Running ghc-pkg --global --simple-output --unit-id field text-2.0.2 abi
edcc74d46bc3b20600110db51c75c238
Running ghc-pkg --global --simple-output --unit-id field time-1.12.2 name
time
Running ghc-pkg --global --simple-output --unit-id field time-1.12.2 version
1.12.2
Running ghc-pkg --global --simple-output --unit-id field time-1.12.2 abi
a9cccb66c0a7c723756ecc7e2162f4b4
dh_haskell_blurbs --package=libghc-lumberjack-prof --type=prof
dh_haskell_description --package=libghc-lumberjack-prof
Running grep-dctrl --no-field-names --show-field=Description --field=Source --regex .* debian/control
Running grep-dctrl --no-field-names --show-field=X-Description --field=Source --regex .* debian/control
Trek through your code forest and make logs
This is a logging facility. Yes, there are many, and this is the one
with a beard, wearing flannel and boots, that gets the job done. It's
not the fanciest, it doesn't have a cargo-van full of features. This
logger is designed to be straightforward to use, provide a good set of
standard features, and be useable across a broad set of code.
.
* Logging itself is a monadic activity. This activity is most often
performed in a monad stack with a MonadIO context to allow
writing to files.
.
* The specific logging action implementations are managed separately
from the actions of logging messages in the target code. This
allows logging to be configurable and the manner of logging to
be specified at startup time without requiring changes in the
code from which log messages are being generated.
.
* The logging implementation code can use contravariant functors to
adjust existing logging.
.
* Main code will typically retrieve the logging actions from a Reader
context in your monad stack. That said, Log actions are not tied
to an enclosing Monad. There are helpers to support a Monad which
can store Log actions, but Log actions can also be explicitly
passed and used.
.
* The prettyprinter package is used for formatting.
dh_haskell_compiler --package=libghc-lumberjack-prof
Running dpkg-query --showformat=${Version} --show ghc
9.6.6-3
dh_installdocs -plibghc-lumberjack-dev
dh_installexamples -plibghc-lumberjack-dev
dh_installman -plibghc-lumberjack-dev
dh_installinfo -plibghc-lumberjack-dev
dh_installmenu -plibghc-lumberjack-dev
dh_installcron -plibghc-lumberjack-dev
dh_systemd_enable -plibghc-lumberjack-dev
dh_installinit -plibghc-lumberjack-dev
dh_installdebconf -plibghc-lumberjack-dev
dh_installemacsen -plibghc-lumberjack-dev
dh_installcatalogs -plibghc-lumberjack-dev
dh_installpam -plibghc-lumberjack-dev
dh_installlogrotate -plibghc-lumberjack-dev
dh_installlogcheck -plibghc-lumberjack-dev
dh_installchangelogs -plibghc-lumberjack-dev
dh_installudev -plibghc-lumberjack-dev
dh_lintian -plibghc-lumberjack-dev
dh_bugfiles -plibghc-lumberjack-dev
dh_install -plibghc-lumberjack-dev
dh_systemd_start -plibghc-lumberjack-dev
dh_link -plibghc-lumberjack-dev
dh_buildinfo -plibghc-lumberjack-dev
dh_installmime -plibghc-lumberjack-dev
dh_installgsettings -plibghc-lumberjack-dev
dh_installdocs -plibghc-lumberjack-prof
dh_installexamples -plibghc-lumberjack-prof
dh_installman -plibghc-lumberjack-prof
dh_installinfo -plibghc-lumberjack-prof
dh_installmenu -plibghc-lumberjack-prof
dh_installcron -plibghc-lumberjack-prof
dh_systemd_enable -plibghc-lumberjack-prof
dh_installinit -plibghc-lumberjack-prof
dh_installdebconf -plibghc-lumberjack-prof
dh_installemacsen -plibghc-lumberjack-prof
dh_installcatalogs -plibghc-lumberjack-prof
dh_installpam -plibghc-lumberjack-prof
dh_installlogrotate -plibghc-lumberjack-prof
dh_installlogcheck -plibghc-lumberjack-prof
dh_installchangelogs -plibghc-lumberjack-prof
dh_installudev -plibghc-lumberjack-prof
dh_lintian -plibghc-lumberjack-prof
dh_bugfiles -plibghc-lumberjack-prof
dh_install -plibghc-lumberjack-prof
dh_systemd_start -plibghc-lumberjack-prof
dh_link -plibghc-lumberjack-prof
dh_buildinfo -plibghc-lumberjack-prof
dh_installmime -plibghc-lumberjack-prof
dh_installgsettings -plibghc-lumberjack-prof
dh_strip -plibghc-lumberjack-dev --no-automatic-dbgsym
dh_strip_nondeterminism -plibghc-lumberjack-dev
dh_compress -plibghc-lumberjack-dev -X .haddock -X .hs -X .txt
dh_fixperms -plibghc-lumberjack-dev
dh_makeshlibs -plibghc-lumberjack-dev -XlibHS
dh_strip -plibghc-lumberjack-prof --no-automatic-dbgsym
dh_strip_nondeterminism -plibghc-lumberjack-prof
dh_compress -plibghc-lumberjack-prof -X .haddock -X .hs -X .txt
dh_fixperms -plibghc-lumberjack-prof
dh_makeshlibs -plibghc-lumberjack-prof -XlibHS
dh_installdeb -plibghc-lumberjack-dev
dh_perl -plibghc-lumberjack-dev
dh_shlibdeps -plibghc-lumberjack-dev -- --ignore-missing-info
dpkg-shlibdeps: warning: debian/libghc-lumberjack-dev/usr/lib/haskell-packages/ghc/lib/aarch64-linux-ghc-9.6.6/libHSlumberjack-1.0.3.0-199utxy5HlO7szhqcDQCWs-ghc9.6.6.so contains an unresolvable reference to symbol stg_ARR_WORDS_info: it's probably a plugin
dpkg-shlibdeps: warning: 21 other similar warnings have been skipped (use -v to see them all)
dpkg-shlibdeps: warning: package could avoid a useless dependency if debian/libghc-lumberjack-dev/usr/lib/haskell-packages/ghc/lib/aarch64-linux-ghc-9.6.6/libHSlumberjack-1.0.3.0-199utxy5HlO7szhqcDQCWs-ghc9.6.6.so was not linked against libHSghc-boot-th-9.6.6-ghc9.6.6.so (it uses none of the library's symbols)
dpkg-shlibdeps: warning: package could avoid a useless dependency if debian/libghc-lumberjack-dev/usr/lib/haskell-packages/ghc/lib/aarch64-linux-ghc-9.6.6/libHSlumberjack-1.0.3.0-199utxy5HlO7szhqcDQCWs-ghc9.6.6.so was not linked against libHScolour-2.3.6-Dv7015zVt5k10e0N0YtJJm-ghc9.6.6.so (it uses none of the library's symbols)
dpkg-shlibdeps: warning: package could avoid a useless dependency if debian/libghc-lumberjack-dev/usr/lib/haskell-packages/ghc/lib/aarch64-linux-ghc-9.6.6/libHSlumberjack-1.0.3.0-199utxy5HlO7szhqcDQCWs-ghc9.6.6.so was not linked against libHSstm-2.5.1.0-ghc9.6.6.so (it uses none of the library's symbols)
dpkg-shlibdeps: warning: package could avoid a useless dependency if debian/libghc-lumberjack-dev/usr/lib/haskell-packages/ghc/lib/aarch64-linux-ghc-9.6.6/libHSlumberjack-1.0.3.0-199utxy5HlO7szhqcDQCWs-ghc9.6.6.so was not linked against libHStransformers-0.6.1.0-ghc9.6.6.so (it uses none of the library's symbols)
dpkg-shlibdeps: warning: package could avoid a useless dependency if debian/libghc-lumberjack-dev/usr/lib/haskell-packages/ghc/lib/aarch64-linux-ghc-9.6.6/libHSlumberjack-1.0.3.0-199utxy5HlO7szhqcDQCWs-ghc9.6.6.so was not linked against libHSmtl-2.3.1-ghc9.6.6.so (it uses none of the library's symbols)
dpkg-shlibdeps: warning: package could avoid a useless dependency if debian/libghc-lumberjack-dev/usr/lib/haskell-packages/ghc/lib/aarch64-linux-ghc-9.6.6/libHSlumberjack-1.0.3.0-199utxy5HlO7szhqcDQCWs-ghc9.6.6.so was not linked against libHSansi-terminal-1.0.2-BAf8I876hPhJFEtshgOsOs-ghc9.6.6.so (it uses none of the library's symbols)
dpkg-shlibdeps: warning: package could avoid a useless dependency if debian/libghc-lumberjack-dev/usr/lib/haskell-packages/ghc/lib/aarch64-linux-ghc-9.6.6/libHSlumberjack-1.0.3.0-199utxy5HlO7szhqcDQCWs-ghc9.6.6.so was not linked against libHSansi-terminal-types-0.11.5-EqlSjsBzg08BPCkB2XI47w-ghc9.6.6.so (it uses none of the library's symbols)
dpkg-shlibdeps: warning: package could avoid a useless dependency if debian/libghc-lumberjack-dev/usr/lib/haskell-packages/ghc/lib/aarch64-linux-ghc-9.6.6/libHSlumberjack-1.0.3.0-199utxy5HlO7szhqcDQCWs-ghc9.6.6.so was not linked against libHSdeepseq-1.4.8.1-ghc9.6.6.so (it uses none of the library's symbols)
dpkg-shlibdeps: warning: package could avoid a useless dependency if debian/libghc-lumberjack-dev/usr/lib/haskell-packages/ghc/lib/aarch64-linux-ghc-9.6.6/libHSlumberjack-1.0.3.0-199utxy5HlO7szhqcDQCWs-ghc9.6.6.so was not linked against libHSarray-0.5.6.0-ghc9.6.6.so (it uses none of the library's symbols)
dpkg-shlibdeps: warning: package could avoid a useless dependency if debian/libghc-lumberjack-dev/usr/lib/haskell-packages/ghc/lib/aarch64-linux-ghc-9.6.6/libHSlumberjack-1.0.3.0-199utxy5HlO7szhqcDQCWs-ghc9.6.6.so was not linked against libHSbytestring-0.11.5.3-ghc9.6.6.so (it uses none of the library's symbols)
dpkg-shlibdeps: warning: package could avoid a useless dependency if debian/libghc-lumberjack-dev/usr/lib/haskell-packages/ghc/lib/aarch64-linux-ghc-9.6.6/libHSlumberjack-1.0.3.0-199utxy5HlO7szhqcDQCWs-ghc9.6.6.so was not linked against libHStemplate-haskell-2.20.0.0-ghc9.6.6.so (it uses none of the library's symbols)
dpkg-shlibdeps: warning: package could avoid a useless dependency if debian/libghc-lumberjack-dev/usr/lib/haskell-packages/ghc/lib/aarch64-linux-ghc-9.6.6/libHSlumberjack-1.0.3.0-199utxy5HlO7szhqcDQCWs-ghc9.6.6.so was not linked against libHSbinary-0.8.9.1-ghc9.6.6.so (it uses none of the library's symbols)
dpkg-shlibdeps: warning: package could avoid a useless dependency if debian/libghc-lumberjack-dev/usr/lib/haskell-packages/ghc/lib/aarch64-linux-ghc-9.6.6/libHSlumberjack-1.0.3.0-199utxy5HlO7szhqcDQCWs-ghc9.6.6.so was not linked against libgmp.so.10 (it uses none of the library's symbols)
dpkg-shlibdeps: warning: package could avoid a useless dependency if debian/libghc-lumberjack-dev/usr/lib/haskell-packages/ghc/lib/aarch64-linux-ghc-9.6.6/libHSlumberjack-1.0.3.0-199utxy5HlO7szhqcDQCWs-ghc9.6.6.so was not linked against libHSpretty-1.1.3.6-ghc9.6.6.so (it uses none of the library's symbols)
dpkg-shlibdeps: warning: package could avoid a useless dependency if debian/libghc-lumberjack-dev/usr/lib/haskell-packages/ghc/lib/aarch64-linux-ghc-9.6.6/libHSlumberjack-1.0.3.0-199utxy5HlO7szhqcDQCWs-ghc9.6.6.so was not linked against libHScontainers-0.6.7-ghc9.6.6.so (it uses none of the library's symbols)
dpkg-shlibdeps: warning: package could avoid a useless dependency if debian/libghc-lumberjack-dev/usr/lib/haskell-packages/ghc/lib/aarch64-linux-ghc-9.6.6/libHSlumberjack-1.0.3.0-199utxy5HlO7szhqcDQCWs-ghc9.6.6.so was not linked against libHSStateVar-1.2.2-A6sCENWC9xLH02ziP9IDyb-ghc9.6.6.so (it uses none of the library's symbols)
dpkg-shlibdeps: warning: package could avoid a useless dependency if debian/libghc-lumberjack-dev/usr/lib/haskell-packages/ghc/lib/aarch64-linux-ghc-9.6.6/libHSlumberjack-1.0.3.0-199utxy5HlO7szhqcDQCWs-ghc9.6.6.so was not linked against libm.so.6 (it uses none of the library's symbols)
dh_installdeb -plibghc-lumberjack-prof
dh_perl -plibghc-lumberjack-prof
dh_shlibdeps -plibghc-lumberjack-prof -- --ignore-missing-info
dh_gencontrol -plibghc-lumberjack-dev -- '-DGHC-Package=${haskell:ghc-package}'
dpkg-gencontrol: warning: Recommends field of package libghc-lumberjack-dev: substitution variable ${haskell:Recommends} used, but is not defined
dpkg-gencontrol: warning: Suggests field of package libghc-lumberjack-dev: substitution variable ${haskell:Suggests} used, but is not defined
dpkg-gencontrol: warning: Conflicts field of package libghc-lumberjack-dev: substitution variable ${haskell:Conflicts} used, but is not defined
dpkg-gencontrol: warning: package libghc-lumberjack-dev: substitution variable ${haskell:ghc-version} unused, but is defined
# only call dh_scour for packages in main
if grep -q '^Component:[[:space:]]*main' /CurrentlyBuilding 2>/dev/null; then dh_scour -plibghc-lumberjack-dev ; fi
dh_md5sums -plibghc-lumberjack-dev
dh_builddeb -plibghc-lumberjack-dev
dpkg-deb: building package 'libghc-lumberjack-dev' in '../libghc-lumberjack-dev_1.0.3.0-2_arm64.deb'.
dh_gencontrol -plibghc-lumberjack-prof
dpkg-gencontrol: warning: Recommends field of package libghc-lumberjack-prof: substitution variable ${haskell:Recommends} used, but is not defined
dpkg-gencontrol: warning: Suggests field of package libghc-lumberjack-prof: substitution variable ${haskell:Suggests} used, but is not defined
dpkg-gencontrol: warning: Conflicts field of package libghc-lumberjack-prof: substitution variable ${haskell:Conflicts} used, but is not defined
dpkg-gencontrol: warning: package libghc-lumberjack-prof: substitution variable ${haskell:ghc-package} unused, but is defined
dpkg-gencontrol: warning: package libghc-lumberjack-prof: substitution variable ${haskell:ghc-version} unused, but is defined
# only call dh_scour for packages in main
if grep -q '^Component:[[:space:]]*main' /CurrentlyBuilding 2>/dev/null; then dh_scour -plibghc-lumberjack-prof ; fi
dh_md5sums -plibghc-lumberjack-prof
dh_builddeb -plibghc-lumberjack-prof
dpkg-deb: building package 'libghc-lumberjack-prof' in '../libghc-lumberjack-prof_1.0.3.0-2_arm64.deb'.
dpkg-genbuildinfo --build=binary -O../haskell-lumberjack_1.0.3.0-2_arm64.buildinfo
dpkg-genchanges --build=binary -O../haskell-lumberjack_1.0.3.0-2_arm64.changes
dpkg-genchanges: warning: substitution variable ${haskell:ShortDescription} used, but is not defined
dpkg-genchanges: warning: substitution variable ${haskell:ShortBlurb} used, but is not defined
dpkg-genchanges: warning: substitution variable ${haskell:ShortDescription} used, but is not defined
dpkg-genchanges: warning: substitution variable ${haskell:ShortBlurb} used, but is not defined
dpkg-genchanges: warning: substitution variable ${haskell:ShortDescription} used, but is not defined
dpkg-genchanges: warning: substitution variable ${haskell:ShortBlurb} used, but is not defined
dpkg-genchanges: info: binary-only upload (no source code included)
dpkg-source --after-build .
dpkg-buildpackage: info: binary-only upload (no source included)
--------------------------------------------------------------------------------
Build finished at 2024-11-16T13:55:19Z
Finished
--------
I: Built successfully
+------------------------------------------------------------------------------+
| Changes |
+------------------------------------------------------------------------------+
haskell-lumberjack_1.0.3.0-2_arm64.changes:
-------------------------------------------
Format: 1.8
Date: Fri, 20 Sep 2024 09:11:28 +0300
Source: haskell-lumberjack
Binary: libghc-lumberjack-dev libghc-lumberjack-doc libghc-lumberjack-prof
Architecture: arm64 all
Version: 1.0.3.0-2
Distribution: sid
Urgency: medium
Maintainer: Debian Haskell Group <pkg-haskell-maintainers@lists.alioth.debian.org>
Changed-By: Ilias Tsitsimpis <iliastsi@debian.org>
Description:
libghc-lumberjack-dev -
libghc-lumberjack-doc -
libghc-lumberjack-prof -
Changes:
haskell-lumberjack (1.0.3.0-2) unstable; urgency=medium
.
* Declare compliance with Debian policy 4.7.0
* Sourceful upload for GHC 9.6
Checksums-Sha1:
4798735090522c34c2d0a53b7ec37c51c20d4027 8601 haskell-lumberjack_1.0.3.0-2_arm64.buildinfo
3fc98e35315cde8e9edc3493a72ac7d9623acf6a 63744 libghc-lumberjack-dev_1.0.3.0-2_arm64.deb
c1e0163cbba506d8998fdbdc01efe323e94a0d5f 59184 libghc-lumberjack-doc_1.0.3.0-2_all.deb
b71d90dabf6ac1894a9e92e5ab083b128d865e3a 67360 libghc-lumberjack-prof_1.0.3.0-2_arm64.deb
Checksums-Sha256:
5eb3aaed75b6144074b29e7ffbb7a318477c3094db8a58ba9165c051f765f46b 8601 haskell-lumberjack_1.0.3.0-2_arm64.buildinfo
f7b39c1ead97d15c6fec89d6d2a0a6384eb4a6dd4410278c66c67a467becc100 63744 libghc-lumberjack-dev_1.0.3.0-2_arm64.deb
0c5ab158c19bc6c77d8f21f6c54b530b5e89bf6b9b55cd65da7e2f6df875baf4 59184 libghc-lumberjack-doc_1.0.3.0-2_all.deb
96dac2eb7068f49ce24f8d45c4494a0eb3c159b4dd5c6012b1606ed77e0b7995 67360 libghc-lumberjack-prof_1.0.3.0-2_arm64.deb
Files:
9477a8158576e9048a1f535611ad18b5 8601 haskell optional haskell-lumberjack_1.0.3.0-2_arm64.buildinfo
2d3883eceeacdf86ce7430326421af86 63744 haskell optional libghc-lumberjack-dev_1.0.3.0-2_arm64.deb
139931bfd6c5d4b64215b9bc985f18ca 59184 doc optional libghc-lumberjack-doc_1.0.3.0-2_all.deb
304505d6a57e3b79e32faec905b3232a 67360 haskell optional libghc-lumberjack-prof_1.0.3.0-2_arm64.deb
+------------------------------------------------------------------------------+
| Buildinfo |
+------------------------------------------------------------------------------+
Format: 1.0
Source: haskell-lumberjack
Binary: libghc-lumberjack-dev libghc-lumberjack-doc libghc-lumberjack-prof
Architecture: all arm64
Version: 1.0.3.0-2
Checksums-Md5:
2d3883eceeacdf86ce7430326421af86 63744 libghc-lumberjack-dev_1.0.3.0-2_arm64.deb
139931bfd6c5d4b64215b9bc985f18ca 59184 libghc-lumberjack-doc_1.0.3.0-2_all.deb
304505d6a57e3b79e32faec905b3232a 67360 libghc-lumberjack-prof_1.0.3.0-2_arm64.deb
Checksums-Sha1:
3fc98e35315cde8e9edc3493a72ac7d9623acf6a 63744 libghc-lumberjack-dev_1.0.3.0-2_arm64.deb
c1e0163cbba506d8998fdbdc01efe323e94a0d5f 59184 libghc-lumberjack-doc_1.0.3.0-2_all.deb
b71d90dabf6ac1894a9e92e5ab083b128d865e3a 67360 libghc-lumberjack-prof_1.0.3.0-2_arm64.deb
Checksums-Sha256:
f7b39c1ead97d15c6fec89d6d2a0a6384eb4a6dd4410278c66c67a467becc100 63744 libghc-lumberjack-dev_1.0.3.0-2_arm64.deb
0c5ab158c19bc6c77d8f21f6c54b530b5e89bf6b9b55cd65da7e2f6df875baf4 59184 libghc-lumberjack-doc_1.0.3.0-2_all.deb
96dac2eb7068f49ce24f8d45c4494a0eb3c159b4dd5c6012b1606ed77e0b7995 67360 libghc-lumberjack-prof_1.0.3.0-2_arm64.deb
Build-Origin: Debian
Build-Architecture: arm64
Build-Date: Sat, 16 Nov 2024 13:55:18 +0000
Build-Path: /<<PKGBUILDDIR>>
Build-Tainted-By:
merged-usr-via-aliased-dirs
Installed-Build-Depends:
autoconf (= 2.72-3),
automake (= 1:1.16.5-1.3),
autopoint (= 0.22.5-2),
autotools-dev (= 20220109.1),
base-files (= 13.5),
base-passwd (= 3.6.5),
bash (= 5.2.32-1+b2),
binutils (= 2.43.1-5),
binutils-aarch64-linux-gnu (= 2.43.1-5),
binutils-common (= 2.43.1-5),
bsdextrautils (= 2.40.2-11),
bsdutils (= 1:2.40.2-11),
build-essential (= 12.12),
bzip2 (= 1.0.8-6),
cdbs (= 0.4.166),
coreutils (= 9.5-1+b1),
cpp (= 4:14.2.0-1),
cpp-14 (= 14.2.0-8),
cpp-14-aarch64-linux-gnu (= 14.2.0-8),
cpp-aarch64-linux-gnu (= 4:14.2.0-1),
dash (= 0.5.12-9+b1),
dctrl-tools (= 2.24-3+b1),
debconf (= 1.5.87),
debhelper (= 13.20),
debianutils (= 5.21),
dh-autoreconf (= 20),
dh-buildinfo (= 0.11+nmu3),
dh-strip-nondeterminism (= 1.14.0-1),
diffutils (= 1:3.10-1+b1),
dpkg (= 1.22.12~1.gbp82cafd),
dpkg-dev (= 1.22.12~1.gbp82cafd),
dwz (= 0.15-1+b1),
file (= 1:5.45-3+b1),
findutils (= 4.10.0-3),
fonts-mathjax (= 2.7.9+dfsg-1),
g++ (= 4:14.2.0-1),
g++-14 (= 14.2.0-8),
g++-14-aarch64-linux-gnu (= 14.2.0-8),
g++-aarch64-linux-gnu (= 4:14.2.0-1),
gcc (= 4:14.2.0-1),
gcc-14 (= 14.2.0-8),
gcc-14-aarch64-linux-gnu (= 14.2.0-8),
gcc-14-base (= 14.2.0-8),
gcc-aarch64-linux-gnu (= 4:14.2.0-1),
gettext (= 0.22.5-2),
gettext-base (= 0.22.5-2),
ghc (= 9.6.6-3),
ghc-doc (= 9.6.6-3),
ghc-prof (= 9.6.6-3),
grep (= 3.11-4+b1),
groff-base (= 1.23.0-5),
gzip (= 1.12-1.1+b1),
haskell-devscripts-minimal (= 0.16.33),
hostname (= 3.25),
html-xml-utils (= 7.7-1.1+b2),
init-system-helpers (= 1.67),
intltool-debian (= 0.35.0+20060710.6),
libacl1 (= 2.3.2-2+b1),
libarchive-zip-perl (= 1.68-1),
libasan8 (= 14.2.0-8),
libatomic1 (= 14.2.0-8),
libattr1 (= 1:2.5.2-2),
libaudit-common (= 1:4.0.2-2),
libaudit1 (= 1:4.0.2-2),
libb-hooks-op-check-perl (= 0.22-3+b2),
libbinutils (= 2.43.1-5),
libblkid1 (= 2.40.2-11),
libbrotli1 (= 1.1.0-2+b6),
libbsd-dev (= 0.12.2-2),
libbsd0 (= 0.12.2-2),
libbz2-1.0 (= 1.0.8-6),
libc-bin (= 2.40-3),
libc-dev-bin (= 2.40-3),
libc6 (= 2.40-3),
libc6-dev (= 2.40-3),
libcap-ng0 (= 0.8.5-3+b1),
libcap2 (= 1:2.66-5+b1),
libcc1-0 (= 14.2.0-8),
libcom-err2 (= 1.47.1-1+b1),
libconst-fast-perl (= 0.014-2),
libcrypt-dev (= 1:4.4.36-5),
libcrypt1 (= 1:4.4.36-5),
libctf-nobfd0 (= 2.43.1-5),
libctf0 (= 2.43.1-5),
libcurl3t64-gnutls (= 8.11.0-1),
libdata-optlist-perl (= 0.114-1),
libdb5.3t64 (= 5.3.28+dfsg2-9),
libdebconfclient0 (= 0.273),
libdebhelper-perl (= 13.20),
libdevel-callchecker-perl (= 0.009-1+b1),
libdevel-confess-perl (= 0.009004-4),
libdpkg-perl (= 1.22.12~1.gbp82cafd),
libdynaloader-functions-perl (= 0.004-1),
libelf1t64 (= 0.192-4),
libexpat1 (= 2.6.4-1),
libffi-dev (= 3.4.6-1),
libffi8 (= 3.4.6-1),
libfile-stripnondeterminism-perl (= 1.14.0-1),
libgcc-14-dev (= 14.2.0-8),
libgcc-s1 (= 14.2.0-8),
libgdbm-compat4t64 (= 1.24-2),
libgdbm6t64 (= 1.24-2),
libghc-ansi-terminal-dev (= 1.0.2-1),
libghc-ansi-terminal-prof (= 1.0.2-1),
libghc-ansi-terminal-types-dev (= 0.11.5-3),
libghc-ansi-terminal-types-prof (= 0.11.5-3),
libghc-colour-dev (= 2.3.6-3),
libghc-colour-prof (= 2.3.6-3),
libghc-contravariant-dev (= 1.5.5-3),
libghc-contravariant-doc (= 1.5.5-3),
libghc-contravariant-prof (= 1.5.5-3),
libghc-prettyprinter-ansi-terminal-dev (= 1.1.3-3),
libghc-prettyprinter-ansi-terminal-doc (= 1.1.3-3),
libghc-prettyprinter-ansi-terminal-prof (= 1.1.3-3),
libghc-prettyprinter-dev (= 1.7.1-3),
libghc-prettyprinter-doc (= 1.7.1-3),
libghc-prettyprinter-prof (= 1.7.1-3),
libghc-statevar-dev (= 1.2.2-3),
libghc-statevar-prof (= 1.2.2-3),
libgmp-dev (= 2:6.3.0+dfsg-2+b2),
libgmp10 (= 2:6.3.0+dfsg-2+b2),
libgmpxx4ldbl (= 2:6.3.0+dfsg-2+b2),
libgnutls30t64 (= 3.8.8-2),
libgomp1 (= 14.2.0-8),
libgprofng0 (= 2.43.1-5),
libgssapi-krb5-2 (= 1.21.3-3),
libhogweed6t64 (= 3.10-1+b1),
libhwasan0 (= 14.2.0-8),
libicu72 (= 72.1-5+b1),
libidn2-0 (= 2.3.7-2+b1),
libipc-run3-perl (= 0.049-1),
libisl23 (= 0.27-1),
libitm1 (= 14.2.0-8),
libjansson4 (= 2.14-2+b3),
libjs-mathjax (= 2.7.9+dfsg-1),
libk5crypto3 (= 1.21.3-3),
libkeyutils1 (= 1.6.3-4),
libkrb5-3 (= 1.21.3-3),
libkrb5support0 (= 1.21.3-3),
libldap-2.5-0 (= 2.5.18+dfsg-3+b1),
liblist-someutils-perl (= 0.59-1),
liblsan0 (= 14.2.0-8),
liblzma5 (= 5.6.3-1+b1),
libmagic-mgc (= 1:5.45-3+b1),
libmagic1t64 (= 1:5.45-3+b1),
libmd-dev (= 1.1.0-2+b1),
libmd0 (= 1.1.0-2+b1),
libmodule-implementation-perl (= 0.09-2),
libmodule-runtime-perl (= 0.016-2),
libmount1 (= 2.40.2-11),
libmpc3 (= 1.3.1-1+b3),
libmpfr6 (= 4.2.1-1+b2),
libncurses-dev (= 6.5-2+b1),
libncurses6 (= 6.5-2+b1),
libncursesw6 (= 6.5-2+b1),
libnettle8t64 (= 3.10-1+b1),
libnghttp2-14 (= 1.64.0-1),
libnghttp3-9 (= 1.4.0-1+b1),
libngtcp2-16 (= 1.6.0-1),
libngtcp2-crypto-gnutls8 (= 1.6.0-1),
libnsl2 (= 1.3.0-3+b3),
libnuma-dev (= 2.0.18-1+b1),
libnuma1 (= 2.0.18-1+b1),
libp11-kit0 (= 0.25.5-2+b1),
libpam-modules (= 1.5.3-7+b1),
libpam-modules-bin (= 1.5.3-7+b1),
libpam-runtime (= 1.5.3-7),
libpam0g (= 1.5.3-7+b1),
libparams-classify-perl (= 0.015-2+b4),
libparams-util-perl (= 1.102-3+b1),
libpath-tiny-perl (= 0.146-1),
libpcre2-8-0 (= 10.44-4),
libperl5.40 (= 5.40.0-7),
libpipeline1 (= 1.5.8-1),
libpsl5t64 (= 0.21.2-1.1+b1),
libpython3-stdlib (= 3.12.7-1),
libpython3.12-minimal (= 3.12.7-3),
libpython3.12-stdlib (= 3.12.7-3),
libreadline8t64 (= 8.2-5),
librtmp1 (= 2.4+20151223.gitfa8646d.1-2+b5),
libsasl2-2 (= 2.1.28+dfsg1-8),
libsasl2-modules-db (= 2.1.28+dfsg1-8),
libseccomp2 (= 2.5.5-1+b3),
libselinux1 (= 3.7-3+b1),
libsframe1 (= 2.43.1-5),
libsmartcols1 (= 2.40.2-11),
libsqlite3-0 (= 3.46.1-1),
libssh2-1t64 (= 1.11.1-1),
libssl3t64 (= 3.3.2-2),
libstdc++-14-dev (= 14.2.0-8),
libstdc++6 (= 14.2.0-8),
libsub-exporter-perl (= 0.990-1),
libsub-exporter-progressive-perl (= 0.001013-3),
libsub-install-perl (= 0.929-1),
libsystemd0 (= 257~rc1-4),
libtasn1-6 (= 4.19.0-3+b3),
libtimedate-perl (= 2.3300-2),
libtinfo6 (= 6.5-2+b1),
libtirpc-common (= 1.3.4+ds-1.3),
libtirpc3t64 (= 1.3.4+ds-1.3+b1),
libtool (= 2.4.7-8),
libtry-tiny-perl (= 0.32-1),
libtsan2 (= 14.2.0-8),
libubsan1 (= 14.2.0-8),
libuchardet0 (= 0.0.8-1+b2),
libudev1 (= 257~rc1-4),
libunicode-utf8-perl (= 0.62-2+b3),
libunistring5 (= 1.2-1+b1),
libuuid1 (= 2.40.2-11),
libxml2 (= 2.12.7+dfsg+really2.9.14-0.2+b1),
libzstd1 (= 1.5.6+dfsg-1+b1),
linux-libc-dev (= 6.11.7-1),
m4 (= 1.4.19-4),
make (= 4.3-4.1+b1),
man-db (= 2.13.0-1),
mawk (= 1.3.4.20240905-1),
media-types (= 10.1.0),
ncurses-base (= 6.5-2),
ncurses-bin (= 6.5-2+b1),
netbase (= 6.4),
openssl-provider-legacy (= 3.3.2-2),
patch (= 2.7.6-7+b1),
perl (= 5.40.0-7),
perl-base (= 5.40.0-7),
perl-modules-5.40 (= 5.40.0-7),
po-debconf (= 1.0.21+nmu1),
python3 (= 3.12.7-1),
python3-minimal (= 3.12.7-1),
python3-scour (= 0.38.2-5),
python3.12 (= 3.12.7-3),
python3.12-minimal (= 3.12.7-3),
readline-common (= 8.2-5),
rpcsvc-proto (= 1.4.3-1+b1),
scour (= 0.38.2-5),
sed (= 4.9-2+b1),
sensible-utils (= 0.0.24),
sysvinit-utils (= 3.11-1),
tar (= 1.35+dfsg-3+b1),
tzdata (= 2024b-3),
util-linux (= 2.40.2-11),
xz-utils (= 5.6.3-1+b1),
zlib1g (= 1:1.3.dfsg+really1.3.1-1+b1)
Environment:
DEB_BUILD_OPTIONS="parallel=8"
LANG="en_US.UTF-8"
LC_ALL="C.UTF-8"
SOURCE_DATE_EPOCH="1726812688"
+------------------------------------------------------------------------------+
| Package contents |
+------------------------------------------------------------------------------+
libghc-lumberjack-dev_1.0.3.0-2_arm64.deb
-----------------------------------------
new Debian package, version 2.0.
size 63744 bytes: control archive=1704 bytes.
2153 bytes, 42 lines control
1057 bytes, 9 lines md5sums
Package: libghc-lumberjack-dev
Source: haskell-lumberjack
Version: 1.0.3.0-2
Architecture: arm64
Maintainer: Debian Haskell Group <pkg-haskell-maintainers@lists.alioth.debian.org>
Installed-Size: 574
Depends: libghc-base-dev-4.18.2.1-75247, libghc-contravariant-dev-1.5.5-beebf, libghc-exceptions-dev-0.10.7-fdf92, libghc-prettyprinter-ansi-terminal-dev-1.1.3-fa00a, libghc-prettyprinter-dev-1.7.1-8f1cb, libghc-text-dev-2.0.2-edcc7, libghc-time-dev-1.12.2-a9ccc, libc6 (>= 2.17), libgmp10 (>= 2:6.3.0+dfsg)
Provides: libghc-lumberjack-dev-1.0.3.0-661d5
Section: haskell
Priority: optional
Homepage: https://github.com/GaloisInc/lumberjack
Description: Trek through your code forest and make logs
This is a logging facility. Yes, there are many, and this is the one
with a beard, wearing flannel and boots, that gets the job done. It's
not the fanciest, it doesn't have a cargo-van full of features. This
logger is designed to be straightforward to use, provide a good set of
standard features, and be useable across a broad set of code.
.
* Logging itself is a monadic activity. This activity is most often
performed in a monad stack with a MonadIO context to allow
writing to files.
.
* The specific logging action implementations are managed separately
from the actions of logging messages in the target code. This
allows logging to be configurable and the manner of logging to
be specified at startup time without requiring changes in the
code from which log messages are being generated.
.
* The logging implementation code can use contravariant functors to
adjust existing logging.
.
* Main code will typically retrieve the logging actions from a Reader
context in your monad stack. That said, Log actions are not tied
to an enclosing Monad. There are helpers to support a Monad which
can store Log actions, but Log actions can also be explicitly
passed and used.
.
* The prettyprinter package is used for formatting.
.
This package provides a library for the Haskell programming language.
See http://www.haskell.org/ for more information on Haskell.
Ghc-Package: lumberjack-1.0.3.0-199utxy5HlO7szhqcDQCWs
drwxr-xr-x root/root 0 2024-09-20 06:11 ./
drwxr-xr-x root/root 0 2024-09-20 06:11 ./usr/
drwxr-xr-x root/root 0 2024-09-20 06:11 ./usr/lib/
drwxr-xr-x root/root 0 2024-09-20 06:11 ./usr/lib/haskell-packages/
drwxr-xr-x root/root 0 2024-09-20 06:11 ./usr/lib/haskell-packages/ghc/
drwxr-xr-x root/root 0 2024-09-20 06:11 ./usr/lib/haskell-packages/ghc/lib/
drwxr-xr-x root/root 0 2024-09-20 06:11 ./usr/lib/haskell-packages/ghc/lib/aarch64-linux-ghc-9.6.6/
-rw-r--r-- root/root 207696 2024-09-20 06:11 ./usr/lib/haskell-packages/ghc/lib/aarch64-linux-ghc-9.6.6/libHSlumberjack-1.0.3.0-199utxy5HlO7szhqcDQCWs-ghc9.6.6.so
drwxr-xr-x root/root 0 2024-09-20 06:11 ./usr/lib/haskell-packages/ghc/lib/aarch64-linux-ghc-9.6.6/lumberjack-1.0.3.0-199utxy5HlO7szhqcDQCWs/
-rw-r--r-- root/root 56897 2024-09-20 06:11 ./usr/lib/haskell-packages/ghc/lib/aarch64-linux-ghc-9.6.6/lumberjack-1.0.3.0-199utxy5HlO7szhqcDQCWs/Lumberjack.dyn_hi
-rw-r--r-- root/root 56894 2024-09-20 06:11 ./usr/lib/haskell-packages/ghc/lib/aarch64-linux-ghc-9.6.6/lumberjack-1.0.3.0-199utxy5HlO7szhqcDQCWs/Lumberjack.hi
-rw-r--r-- root/root 236578 2024-09-20 06:11 ./usr/lib/haskell-packages/ghc/lib/aarch64-linux-ghc-9.6.6/lumberjack-1.0.3.0-199utxy5HlO7szhqcDQCWs/libHSlumberjack-1.0.3.0-199utxy5HlO7szhqcDQCWs.a
drwxr-xr-x root/root 0 2024-09-20 06:11 ./usr/share/
drwxr-xr-x root/root 0 2024-09-20 06:11 ./usr/share/doc/
drwxr-xr-x root/root 0 2024-09-20 06:11 ./usr/share/doc/libghc-lumberjack-dev/
-rw-r--r-- root/root 3736 2024-09-20 06:11 ./usr/share/doc/libghc-lumberjack-dev/buildinfo_arm64.gz
-rw-r--r-- root/root 346 2024-09-20 06:11 ./usr/share/doc/libghc-lumberjack-dev/changelog.Debian.gz
-rw-r--r-- root/root 620 2001-09-09 01:46 ./usr/share/doc/libghc-lumberjack-dev/changelog.gz
-rw-r--r-- root/root 1128 2022-09-03 12:32 ./usr/share/doc/libghc-lumberjack-dev/copyright
drwxr-xr-x root/root 0 2024-09-20 06:11 ./var/
drwxr-xr-x root/root 0 2024-09-20 06:11 ./var/lib/
drwxr-xr-x root/root 0 2024-09-20 06:11 ./var/lib/ghc/
drwxr-xr-x root/root 0 2024-09-20 06:11 ./var/lib/ghc/package.conf.d/
-rw-r--r-- root/root 2895 2024-09-20 06:11 ./var/lib/ghc/package.conf.d/lumberjack-1.0.3.0.conf
libghc-lumberjack-doc_1.0.3.0-2_all.deb
---------------------------------------
new Debian package, version 2.0.
size 59184 bytes: control archive=1816 bytes.
1989 bytes, 43 lines control
1517 bytes, 17 lines md5sums
Package: libghc-lumberjack-doc
Source: haskell-lumberjack
Version: 1.0.3.0-2
Architecture: all
Maintainer: Debian Haskell Group <pkg-haskell-maintainers@lists.alioth.debian.org>
Installed-Size: 450
Depends: haddock-interface-42
Recommends: ghc-doc, libghc-contravariant-doc, libghc-lumberjack-dev, libghc-prettyprinter-ansi-terminal-doc, libghc-prettyprinter-doc, libjs-mathjax
Suggests: libghc-lumberjack-prof
Section: doc
Priority: optional
Homepage: https://github.com/GaloisInc/lumberjack
Description: Trek through your code forest and make logs; documentation
This is a logging facility. Yes, there are many, and this is the one
with a beard, wearing flannel and boots, that gets the job done. It's
not the fanciest, it doesn't have a cargo-van full of features. This
logger is designed to be straightforward to use, provide a good set of
standard features, and be useable across a broad set of code.
.
* Logging itself is a monadic activity. This activity is most often
performed in a monad stack with a MonadIO context to allow
writing to files.
.
* The specific logging action implementations are managed separately
from the actions of logging messages in the target code. This
allows logging to be configurable and the manner of logging to
be specified at startup time without requiring changes in the
code from which log messages are being generated.
.
* The logging implementation code can use contravariant functors to
adjust existing logging.
.
* Main code will typically retrieve the logging actions from a Reader
context in your monad stack. That said, Log actions are not tied
to an enclosing Monad. There are helpers to support a Monad which
can store Log actions, but Log actions can also be explicitly
passed and used.
.
* The prettyprinter package is used for formatting.
.
This package provides the documentation for a library for the Haskell
programming language.
See http://www.haskell.org/ for more information on Haskell.
drwxr-xr-x root/root 0 2024-09-20 06:11 ./
drwxr-xr-x root/root 0 2024-09-20 06:11 ./usr/
drwxr-xr-x root/root 0 2024-09-20 06:11 ./usr/lib/
drwxr-xr-x root/root 0 2024-09-20 06:11 ./usr/lib/ghc-doc/
drwxr-xr-x root/root 0 2024-09-20 06:11 ./usr/lib/ghc-doc/haddock/
drwxr-xr-x root/root 0 2024-09-20 06:11 ./usr/lib/ghc-doc/haddock/lumberjack-1.0.3.0/
-rw-r--r-- root/root 7549 2024-09-20 06:11 ./usr/lib/ghc-doc/haddock/lumberjack-1.0.3.0/lumberjack.haddock
drwxr-xr-x root/root 0 2024-09-20 06:11 ./usr/lib/ghc-doc/hoogle/
lrwxrwxrwx root/root 0 2024-09-20 06:11 ./usr/lib/ghc-doc/hoogle/libghc-lumberjack-doc.txt -> ../../../share/doc/libghc-lumberjack-doc/html/lumberjack.txt
drwxr-xr-x root/root 0 2024-09-20 06:11 ./usr/share/
drwxr-xr-x root/root 0 2024-09-20 06:11 ./usr/share/doc/
drwxr-xr-x root/root 0 2024-09-20 06:11 ./usr/share/doc/libghc-lumberjack-doc/
-rw-r--r-- root/root 3736 2024-09-20 06:11 ./usr/share/doc/libghc-lumberjack-doc/buildinfo_all.gz
-rw-r--r-- root/root 346 2024-09-20 06:11 ./usr/share/doc/libghc-lumberjack-doc/changelog.Debian.gz
-rw-r--r-- root/root 620 2001-09-09 01:46 ./usr/share/doc/libghc-lumberjack-doc/changelog.gz
-rw-r--r-- root/root 1128 2022-09-03 12:32 ./usr/share/doc/libghc-lumberjack-doc/copyright
drwxr-xr-x root/root 0 2024-09-20 06:11 ./usr/share/doc/libghc-lumberjack-doc/html/
-rw-r--r-- root/root 70955 2024-09-20 06:11 ./usr/share/doc/libghc-lumberjack-doc/html/Lumberjack.html
-rw-r--r-- root/root 7022 2024-09-20 06:11 ./usr/share/doc/libghc-lumberjack-doc/html/doc-index.html
-rw-r--r-- root/root 36228 2024-09-20 06:11 ./usr/share/doc/libghc-lumberjack-doc/html/haddock-bundle.min.js
-rw-r--r-- root/root 2880 2024-09-20 06:11 ./usr/share/doc/libghc-lumberjack-doc/html/index.html
-rw-r--r-- root/root 14327 2024-09-20 06:11 ./usr/share/doc/libghc-lumberjack-doc/html/linuwial.css
-rw-r--r-- root/root 10892 2024-09-20 06:11 ./usr/share/doc/libghc-lumberjack-doc/html/lumberjack.txt
-rw-r--r-- root/root 28 2024-09-20 06:11 ./usr/share/doc/libghc-lumberjack-doc/html/meta.json
-rw-r--r-- root/root 3443 2024-09-20 06:11 ./usr/share/doc/libghc-lumberjack-doc/html/quick-jump.css
drwxr-xr-x root/root 0 2024-09-20 06:11 ./usr/share/doc/libghc-lumberjack-doc/html/src/
-rw-r--r-- root/root 264404 2024-09-20 06:11 ./usr/share/doc/libghc-lumberjack-doc/html/src/Lumberjack.html
-rw-r--r-- root/root 567 2024-09-20 06:11 ./usr/share/doc/libghc-lumberjack-doc/html/src/highlight.js
-rw-r--r-- root/root 1433 2024-09-20 06:11 ./usr/share/doc/libghc-lumberjack-doc/html/src/style.css
-rw-r--r-- root/root 11327 2024-09-20 06:11 ./usr/share/doc/libghc-lumberjack-doc/html/synopsis.png
libghc-lumberjack-prof_1.0.3.0-2_arm64.deb
------------------------------------------
new Debian package, version 2.0.
size 67360 bytes: control archive=1612 bytes.
2145 bytes, 41 lines control
679 bytes, 6 lines md5sums
Package: libghc-lumberjack-prof
Source: haskell-lumberjack
Version: 1.0.3.0-2
Architecture: arm64
Maintainer: Debian Haskell Group <pkg-haskell-maintainers@lists.alioth.debian.org>
Installed-Size: 555
Depends: libghc-base-prof-4.18.2.1-75247, libghc-contravariant-prof-1.5.5-beebf, libghc-exceptions-prof-0.10.7-fdf92, libghc-lumberjack-dev (= 1.0.3.0-2), libghc-prettyprinter-ansi-terminal-prof-1.1.3-fa00a, libghc-prettyprinter-prof-1.7.1-8f1cb, libghc-text-prof-2.0.2-edcc7, libghc-time-prof-1.12.2-a9ccc
Provides: libghc-lumberjack-prof-1.0.3.0-661d5
Section: haskell
Priority: optional
Homepage: https://github.com/GaloisInc/lumberjack
Description: Trek through your code forest and make logs; profiling libraries
This is a logging facility. Yes, there are many, and this is the one
with a beard, wearing flannel and boots, that gets the job done. It's
not the fanciest, it doesn't have a cargo-van full of features. This
logger is designed to be straightforward to use, provide a good set of
standard features, and be useable across a broad set of code.
.
* Logging itself is a monadic activity. This activity is most often
performed in a monad stack with a MonadIO context to allow
writing to files.
.
* The specific logging action implementations are managed separately
from the actions of logging messages in the target code. This
allows logging to be configurable and the manner of logging to
be specified at startup time without requiring changes in the
code from which log messages are being generated.
.
* The logging implementation code can use contravariant functors to
adjust existing logging.
.
* Main code will typically retrieve the logging actions from a Reader
context in your monad stack. That said, Log actions are not tied
to an enclosing Monad. There are helpers to support a Monad which
can store Log actions, but Log actions can also be explicitly
passed and used.
.
* The prettyprinter package is used for formatting.
.
This package provides a library for the Haskell programming language, compiled
for profiling. See http://www.haskell.org/ for more information on Haskell.
drwxr-xr-x root/root 0 2024-09-20 06:11 ./
drwxr-xr-x root/root 0 2024-09-20 06:11 ./usr/
drwxr-xr-x root/root 0 2024-09-20 06:11 ./usr/lib/
drwxr-xr-x root/root 0 2024-09-20 06:11 ./usr/lib/haskell-packages/
drwxr-xr-x root/root 0 2024-09-20 06:11 ./usr/lib/haskell-packages/ghc/
drwxr-xr-x root/root 0 2024-09-20 06:11 ./usr/lib/haskell-packages/ghc/lib/
drwxr-xr-x root/root 0 2024-09-20 06:11 ./usr/lib/haskell-packages/ghc/lib/aarch64-linux-ghc-9.6.6/
drwxr-xr-x root/root 0 2024-09-20 06:11 ./usr/lib/haskell-packages/ghc/lib/aarch64-linux-ghc-9.6.6/lumberjack-1.0.3.0-199utxy5HlO7szhqcDQCWs/
-rw-r--r-- root/root 60353 2024-09-20 06:11 ./usr/lib/haskell-packages/ghc/lib/aarch64-linux-ghc-9.6.6/lumberjack-1.0.3.0-199utxy5HlO7szhqcDQCWs/Lumberjack.p_hi
-rw-r--r-- root/root 486608 2024-09-20 06:11 ./usr/lib/haskell-packages/ghc/lib/aarch64-linux-ghc-9.6.6/lumberjack-1.0.3.0-199utxy5HlO7szhqcDQCWs/libHSlumberjack-1.0.3.0-199utxy5HlO7szhqcDQCWs_p.a
drwxr-xr-x root/root 0 2024-09-20 06:11 ./usr/share/
drwxr-xr-x root/root 0 2024-09-20 06:11 ./usr/share/doc/
drwxr-xr-x root/root 0 2024-09-20 06:11 ./usr/share/doc/libghc-lumberjack-prof/
-rw-r--r-- root/root 3736 2024-09-20 06:11 ./usr/share/doc/libghc-lumberjack-prof/buildinfo_arm64.gz
-rw-r--r-- root/root 346 2024-09-20 06:11 ./usr/share/doc/libghc-lumberjack-prof/changelog.Debian.gz
-rw-r--r-- root/root 620 2001-09-09 01:46 ./usr/share/doc/libghc-lumberjack-prof/changelog.gz
-rw-r--r-- root/root 1128 2022-09-03 12:32 ./usr/share/doc/libghc-lumberjack-prof/copyright
lintian
-------
Setup apt archive
-----------------
Merged Build-Depends: lintian
Filtered Build-Depends: lintian
dpkg-deb: warning: root directory has unusual owner or group 998:999.
Hint: either pass --root-owner-group, see dpkg-build-api(7) or add an explicit 'Rules-Requires-Root: no' in debian/control.
dpkg-deb: warning: ignoring 1 warning about the control file(s)
dpkg-deb: building package 'sbuild-build-depends-lintian-dummy' in '/<<RESOLVERDIR>>/apt_archive/sbuild-build-depends-lintian-dummy.deb'.
Ign:1 copy:/<<RESOLVERDIR>>/apt_archive ./ InRelease
Get:2 copy:/<<RESOLVERDIR>>/apt_archive ./ Release [615 B]
Ign:3 copy:/<<RESOLVERDIR>>/apt_archive ./ Release.gpg
Get:4 copy:/<<RESOLVERDIR>>/apt_archive ./ Sources [1740 B]
Get:5 copy:/<<RESOLVERDIR>>/apt_archive ./ Packages [1752 B]
Fetched 4107 B in 0s (349 kB/s)
Reading package lists...
Get:1 file:/<<BUILDDIR>>/resolver-pfkbSw/apt_archive ./ InRelease
Ign:1 file:/<<BUILDDIR>>/resolver-pfkbSw/apt_archive ./ InRelease
Get:2 file:/<<BUILDDIR>>/resolver-pfkbSw/apt_archive ./ Release [606 B]
Get:2 file:/<<BUILDDIR>>/resolver-pfkbSw/apt_archive ./ Release [606 B]
Get:3 file:/<<BUILDDIR>>/resolver-pfkbSw/apt_archive ./ Release.gpg
Ign:3 file:/<<BUILDDIR>>/resolver-pfkbSw/apt_archive ./ Release.gpg
Reading package lists...
Reading package lists...
Install lintian build dependencies (apt-based resolver)
-------------------------------------------------------
Installing build dependencies
Reading package lists...
Building dependency tree...
Reading state information...
The following NEW packages will be installed:
sbuild-build-depends-lintian-dummy
0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded.
Need to get 852 B of archives.
After this operation, 0 B of additional disk space will be used.
Get:1 copy:/<<RESOLVERDIR>>/apt_archive ./ sbuild-build-depends-lintian-dummy 0.invalid.0 [852 B]
debconf: delaying package configuration, since apt-utils is not installed
Fetched 852 B in 0s (0 B/s)
Selecting previously unselected package sbuild-build-depends-lintian-dummy.
(Reading database ... 40152 files and directories currently installed.)
Preparing to unpack .../sbuild-build-depends-lintian-dummy_0.invalid.0_arm64.deb ...
Unpacking sbuild-build-depends-lintian-dummy (0.invalid.0) ...
Setting up sbuild-build-depends-lintian-dummy (0.invalid.0) ...
Running lintian...
E: libghc-lumberjack-dev: custom-library-search-path RUNPATH /usr/lib/haskell-packages/ghc/lib/aarch64-linux-ghc-9.6.6 [usr/lib/haskell-packages/ghc/lib/aarch64-linux-ghc-9.6.6/libHSlumberjack-1.0.3.0-199utxy5HlO7szhqcDQCWs-ghc9.6.6.so]
W: haskell-lumberjack changes: distribution-and-changes-mismatch sid unstable
W: haskell-lumberjack source: no-nmu-in-changelog [debian/changelog:1]
W: haskell-lumberjack source: source-nmu-has-incorrect-version-number 1.0.3.0-2 [debian/changelog:1]
E: Lintian run failed (runtime error)
+------------------------------------------------------------------------------+
| Post Build |
+------------------------------------------------------------------------------+
+------------------------------------------------------------------------------+
| Cleanup |
+------------------------------------------------------------------------------+
Purging /<<BUILDDIR>>
Not cleaning session: cloned chroot in use
+------------------------------------------------------------------------------+
| Summary |
+------------------------------------------------------------------------------+
Build Architecture: arm64
Build Type: binary
Build-Space: 118388
Build-Time: 61
Distribution: sid
Host Architecture: arm64
Install-Time: 48
Job: /tmp/debusine-fetch-exec-upload-gnuzj6un/haskell-lumberjack_1.0.3.0-2.dsc
Lintian: error
Machine Architecture: arm64
Package: haskell-lumberjack
Package-Time: 145
Source-Version: 1.0.3.0-2
Space: 118388
Status: successful
Version: 1.0.3.0-2
--------------------------------------------------------------------------------
Finished at 2024-11-16T13:55:19Z
Build needed 00:02:25, 118388k disk space