sbuild (Debian sbuild) 0.86.3~bpo12+1 (03 November 2024) on debusine-worker-arm64-demeter-02.freexian.com
+==============================================================================+
| jigit 1.22-4 (arm64) Sat, 16 Nov 2024 19:57:19 +0000 |
+==============================================================================+
Package: jigit
Version: 1.22-4
Source Version: 1.22-4
Distribution: sid
Machine Architecture: arm64
Host Architecture: arm64
Build Architecture: arm64
Build Type: binary
I: No tarballs found in /var/lib/debusine/worker/.cache/sbuild
Unpacking /var/lib/debusine/worker/system-images/957781/system.tar.xz to /tmp/tmp.sbuild.PnAKz0tvjp...
I: NOTICE: Log filtering will replace 'sbuild-unshare-dummy-location' with '<<CHROOT>>'
+------------------------------------------------------------------------------+
| Chroot Setup Commands |
+------------------------------------------------------------------------------+
rm -f /etc/resolv.conf
----------------------
I: Finished running 'rm -f /etc/resolv.conf'.
Finished processing commands.
--------------------------------------------------------------------------------
Copying /tmp/debusine-fetch-exec-upload-8ison3xc/dpkg-dbgsym_1.22.12~1.gbp82cafd_arm64.deb to /<<CHROOT>>...
Copying /tmp/debusine-fetch-exec-upload-8ison3xc/dpkg_1.22.12~1.gbp82cafd_arm64.deb to /<<CHROOT>>...
Copying /tmp/debusine-fetch-exec-upload-8ison3xc/dselect-dbgsym_1.22.12~1.gbp82cafd_arm64.deb to /<<CHROOT>>...
Copying /tmp/debusine-fetch-exec-upload-8ison3xc/dselect_1.22.12~1.gbp82cafd_arm64.deb to /<<CHROOT>>...
Copying /tmp/debusine-fetch-exec-upload-8ison3xc/libdpkg-dev_1.22.12~1.gbp82cafd_arm64.deb to /<<CHROOT>>...
Copying /tmp/debusine-fetch-exec-upload-8ison3xc/dpkg-dev_1.22.12~1.gbp82cafd_all.deb to /<<CHROOT>>...
Copying /tmp/debusine-fetch-exec-upload-8ison3xc/libdpkg-perl_1.22.12~1.gbp82cafd_all.deb to /<<CHROOT>>...
I: NOTICE: Log filtering will replace 'build/jigit-rdxtg5/resolver-n3Bdne' with '<<RESOLVERDIR>>'
+------------------------------------------------------------------------------+
| Update chroot |
+------------------------------------------------------------------------------+
Get:1 file:/build/jigit-rdxtg5/resolver-Jj370o/apt_archive ./ InRelease
Ign:1 file:/build/jigit-rdxtg5/resolver-Jj370o/apt_archive ./ InRelease
Get:2 file:/build/jigit-rdxtg5/resolver-Jj370o/apt_archive ./ Release [606 B]
Get:3 http://deb.debian.org/debian sid InRelease [202 kB]
Get:2 file:/build/jigit-rdxtg5/resolver-Jj370o/apt_archive ./ Release [606 B]
Get:4 file:/build/jigit-rdxtg5/resolver-Jj370o/apt_archive ./ Release.gpg
Ign:4 file:/build/jigit-rdxtg5/resolver-Jj370o/apt_archive ./ Release.gpg
Get:5 file:/build/jigit-rdxtg5/resolver-Jj370o/apt_archive ./ Packages [9246 B]
Get:6 http://deb.debian.org/debian sid/main arm64 Packages [9951 kB]
Get:7 http://deb.debian.org/debian sid/main arm64 Components [4911 kB]
Fetched 15.1 MB in 2s (6383 kB/s)
Reading package lists...
Reading package lists...
Building dependency tree...
Reading state information...
Calculating upgrade...
The following packages will be upgraded:
apt bsdextrautils bsdutils debianutils dpkg dpkg-dev libapt-pkg6.0t64
libaudit-common libaudit1 libblkid1 libbrotli1 libcap-ng0 libdpkg-perl
libglib2.0-0t64 libmarkdown2 libmount1 libpcre2-8-0 libseccomp2 libselinux1
libsemanage2 libsmartcols1 libsystemd0 libudev1 libuuid1 libxml2 login
login.defs mount passwd util-linux
30 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
Need to get 9274 kB/12.8 MB of archives.
After this operation, 603 kB disk space will be freed.
Get:1 http://deb.debian.org/debian sid/main arm64 bsdutils arm64 1:2.40.2-11 [104 kB]
Get:2 file:/build/jigit-rdxtg5/resolver-Jj370o/apt_archive ./ dpkg 1.22.12~1.gbp82cafd [1513 kB]
Get:3 file:/build/jigit-rdxtg5/resolver-Jj370o/apt_archive ./ dpkg-dev 1.22.12~1.gbp82cafd [1337 kB]
Get:4 http://deb.debian.org/debian sid/main arm64 debianutils arm64 5.21 [92.1 kB]
Get:5 file:/build/jigit-rdxtg5/resolver-Jj370o/apt_archive ./ libdpkg-perl 1.22.12~1.gbp82cafd [647 kB]
Get:6 http://deb.debian.org/debian sid/main arm64 libsystemd0 arm64 257~rc2-3 [416 kB]
Get:7 http://deb.debian.org/debian sid/main arm64 libudev1 arm64 257~rc2-3 [139 kB]
Get:8 http://deb.debian.org/debian sid/main arm64 libapt-pkg6.0t64 arm64 2.9.11 [921 kB]
Get:9 http://deb.debian.org/debian sid/main arm64 bsdextrautils arm64 2.40.2-11 [91.2 kB]
Get:10 http://deb.debian.org/debian sid/main arm64 libblkid1 arm64 2.40.2-11 [162 kB]
Get:11 http://deb.debian.org/debian sid/main arm64 libmount1 arm64 2.40.2-11 [190 kB]
Get:12 http://deb.debian.org/debian sid/main arm64 libsmartcols1 arm64 2.40.2-11 [135 kB]
Get:13 http://deb.debian.org/debian sid/main arm64 mount arm64 2.40.2-11 [153 kB]
Get:14 http://deb.debian.org/debian sid/main arm64 libuuid1 arm64 2.40.2-11 [35.7 kB]
Get:15 http://deb.debian.org/debian sid/main arm64 util-linux arm64 2.40.2-11 [1170 kB]
Get:16 http://deb.debian.org/debian sid/main arm64 libpcre2-8-0 arm64 10.44-4 [243 kB]
Get:17 http://deb.debian.org/debian sid/main arm64 libselinux1 arm64 3.7-3+b1 [72.1 kB]
Get:18 http://deb.debian.org/debian sid/main arm64 libseccomp2 arm64 2.5.5-1+b3 [46.8 kB]
Get:19 http://deb.debian.org/debian sid/main arm64 apt arm64 2.9.11 [1287 kB]
Get:20 http://deb.debian.org/debian sid/main arm64 libaudit-common all 1:4.0.2-2 [12.7 kB]
Get:21 http://deb.debian.org/debian sid/main arm64 libcap-ng0 arm64 0.8.5-3+b1 [17.0 kB]
Get:22 http://deb.debian.org/debian sid/main arm64 libaudit1 arm64 1:4.0.2-2 [54.2 kB]
Get:23 http://deb.debian.org/debian sid/main arm64 login arm64 1:4.16.0-2+really2.40.2-11 [80.0 kB]
Get:24 http://deb.debian.org/debian sid/main arm64 login.defs all 1:4.16.0-5 [185 kB]
Get:25 http://deb.debian.org/debian sid/main arm64 libsemanage2 arm64 3.7-2+b1 [84.5 kB]
Get:26 http://deb.debian.org/debian sid/main arm64 passwd arm64 1:4.16.0-5 [1210 kB]
Get:27 http://deb.debian.org/debian sid/main arm64 libbrotli1 arm64 1.1.0-2+b6 [297 kB]
Get:28 http://deb.debian.org/debian sid/main arm64 libglib2.0-0t64 arm64 2.82.2-3 [1411 kB]
Get:29 http://deb.debian.org/debian sid/main arm64 libmarkdown2 arm64 2.2.7-2.1 [33.1 kB]
Get:30 http://deb.debian.org/debian sid/main arm64 libxml2 arm64 2.12.7+dfsg+really2.9.14-0.2+b1 [630 kB]
debconf: delaying package configuration, since apt-utils is not installed
Fetched 9274 kB in 0s (60.7 MB/s)
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 17129 files and directories currently installed.)
Preparing to unpack .../bsdutils_1%3a2.40.2-11_arm64.deb ...
Unpacking bsdutils (1:2.40.2-11) over (1:2.40.2-10) ...
Setting up bsdutils (1:2.40.2-11) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 17129 files and directories currently installed.)
Preparing to unpack .../debianutils_5.21_arm64.deb ...
Unpacking debianutils (5.21) over (5.20+b1) ...
Setting up debianutils (5.21) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 17128 files and directories currently installed.)
Preparing to unpack .../libsystemd0_257~rc2-3_arm64.deb ...
Unpacking libsystemd0:arm64 (257~rc2-3) over (257~rc1-4) ...
Setting up libsystemd0:arm64 (257~rc2-3) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 17128 files and directories currently installed.)
Preparing to unpack .../libudev1_257~rc2-3_arm64.deb ...
Unpacking libudev1:arm64 (257~rc2-3) over (257~rc1-4) ...
Setting up libudev1:arm64 (257~rc2-3) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 17128 files and directories currently installed.)
Preparing to unpack .../libapt-pkg6.0t64_2.9.11_arm64.deb ...
Unpacking libapt-pkg6.0t64:arm64 (2.9.11) over (2.9.10) ...
Setting up libapt-pkg6.0t64:arm64 (2.9.11) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 17128 files and directories currently installed.)
Preparing to unpack .../dpkg_1.22.12~1.gbp82cafd_arm64.deb ...
Unpacking dpkg (1.22.12~1.gbp82cafd) over (1.22.11) ...
Setting up dpkg (1.22.12~1.gbp82cafd) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 17127 files and directories currently installed.)
Preparing to unpack .../bsdextrautils_2.40.2-11_arm64.deb ...
Unpacking bsdextrautils (2.40.2-11) over (2.40.2-10) ...
Preparing to unpack .../libblkid1_2.40.2-11_arm64.deb ...
Unpacking libblkid1:arm64 (2.40.2-11) over (2.40.2-10) ...
Setting up libblkid1:arm64 (2.40.2-11) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 17123 files and directories currently installed.)
Preparing to unpack .../libmount1_2.40.2-11_arm64.deb ...
Unpacking libmount1:arm64 (2.40.2-11) over (2.40.2-10) ...
Setting up libmount1:arm64 (2.40.2-11) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 17123 files and directories currently installed.)
Preparing to unpack .../libsmartcols1_2.40.2-11_arm64.deb ...
Unpacking libsmartcols1:arm64 (2.40.2-11) over (2.40.2-10) ...
Setting up libsmartcols1:arm64 (2.40.2-11) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 17123 files and directories currently installed.)
Preparing to unpack .../mount_2.40.2-11_arm64.deb ...
Unpacking mount (2.40.2-11) over (2.40.2-10) ...
Preparing to unpack .../libuuid1_2.40.2-11_arm64.deb ...
Unpacking libuuid1:arm64 (2.40.2-11) over (2.40.2-10) ...
Setting up libuuid1:arm64 (2.40.2-11) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 17123 files and directories currently installed.)
Preparing to unpack .../util-linux_2.40.2-11_arm64.deb ...
Unpacking util-linux (2.40.2-11) over (2.40.2-10) ...
Setting up util-linux (2.40.2-11) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 17120 files and directories currently installed.)
Preparing to unpack .../libpcre2-8-0_10.44-4_arm64.deb ...
Unpacking libpcre2-8-0:arm64 (10.44-4) over (10.42-4+b2) ...
Setting up libpcre2-8-0:arm64 (10.44-4) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 17119 files and directories currently installed.)
Preparing to unpack .../libselinux1_3.7-3+b1_arm64.deb ...
Unpacking libselinux1:arm64 (3.7-3+b1) over (3.7-3) ...
Setting up libselinux1:arm64 (3.7-3+b1) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 17120 files and directories currently installed.)
Preparing to unpack .../libseccomp2_2.5.5-1+b3_arm64.deb ...
Unpacking libseccomp2:arm64 (2.5.5-1+b3) over (2.5.5-1+b2) ...
Setting up libseccomp2:arm64 (2.5.5-1+b3) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 17120 files and directories currently installed.)
Preparing to unpack .../archives/apt_2.9.11_arm64.deb ...
Unpacking apt (2.9.11) over (2.9.10) ...
Setting up apt (2.9.11) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 17117 files and directories currently installed.)
Preparing to unpack .../libaudit-common_1%3a4.0.2-2_all.deb ...
Unpacking libaudit-common (1:4.0.2-2) over (1:4.0.1-3) ...
Setting up libaudit-common (1:4.0.2-2) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 17117 files and directories currently installed.)
Preparing to unpack .../libcap-ng0_0.8.5-3+b1_arm64.deb ...
Unpacking libcap-ng0:arm64 (0.8.5-3+b1) over (0.8.5-3) ...
Setting up libcap-ng0:arm64 (0.8.5-3+b1) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 17118 files and directories currently installed.)
Preparing to unpack .../libaudit1_1%3a4.0.2-2_arm64.deb ...
Unpacking libaudit1:arm64 (1:4.0.2-2) over (1:4.0.1-3) ...
Setting up libaudit1:arm64 (1:4.0.2-2) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 17118 files and directories currently installed.)
Preparing to unpack .../0-login_1%3a4.16.0-2+really2.40.2-11_arm64.deb ...
Unpacking login (1:4.16.0-2+really2.40.2-11) over (1:4.16.0-2+really2.40.2-10) ...
Preparing to unpack .../1-login.defs_1%3a4.16.0-5_all.deb ...
Unpacking login.defs (1:4.16.0-5) over (1:4.16.0-4) ...
Preparing to unpack .../2-libsemanage2_3.7-2+b1_arm64.deb ...
Unpacking libsemanage2:arm64 (3.7-2+b1) over (3.7-2) ...
Preparing to unpack .../3-passwd_1%3a4.16.0-5_arm64.deb ...
Unpacking passwd (1:4.16.0-5) over (1:4.16.0-4) ...
Preparing to unpack .../4-dpkg-dev_1.22.12~1.gbp82cafd_all.deb ...
Unpacking dpkg-dev (1.22.12~1.gbp82cafd) over (1.22.11) ...
Preparing to unpack .../5-libdpkg-perl_1.22.12~1.gbp82cafd_all.deb ...
Unpacking libdpkg-perl (1.22.12~1.gbp82cafd) over (1.22.11) ...
Preparing to unpack .../6-libbrotli1_1.1.0-2+b6_arm64.deb ...
Unpacking libbrotli1:arm64 (1.1.0-2+b6) over (1.1.0-2+b5) ...
Preparing to unpack .../7-libglib2.0-0t64_2.82.2-3_arm64.deb ...
Unpacking libglib2.0-0t64:arm64 (2.82.2-3) over (2.82.2-2) ...
Preparing to unpack .../8-libmarkdown2_2.2.7-2.1_arm64.deb ...
Unpacking libmarkdown2:arm64 (2.2.7-2.1) over (2.2.7-2+b1) ...
Preparing to unpack .../9-libxml2_2.12.7+dfsg+really2.9.14-0.2+b1_arm64.deb ...
Unpacking libxml2:arm64 (2.12.7+dfsg+really2.9.14-0.2+b1) over (2.12.7+dfsg+really2.9.14-0.1) ...
Setting up bsdextrautils (2.40.2-11) ...
Setting up login.defs (1:4.16.0-5) ...
Installing new version of config file /etc/login.defs ...
Setting up libbrotli1:arm64 (1.1.0-2+b6) ...
Setting up libglib2.0-0t64:arm64 (2.82.2-3) ...
No schema files found: doing nothing.
Setting up libdpkg-perl (1.22.12~1.gbp82cafd) ...
Setting up mount (2.40.2-11) ...
Setting up libsemanage2:arm64 (3.7-2+b1) ...
Setting up libxml2:arm64 (2.12.7+dfsg+really2.9.14-0.2+b1) ...
Setting up libmarkdown2:arm64 (2.2.7-2.1) ...
Setting up login (1:4.16.0-2+really2.40.2-11) ...
Setting up dpkg-dev (1.22.12~1.gbp82cafd) ...
Setting up passwd (1:4.16.0-5) ...
Processing triggers for man-db (2.13.0-1) ...
Processing triggers for libc-bin (2.40-3) ...
+------------------------------------------------------------------------------+
| Fetch source files |
+------------------------------------------------------------------------------+
Local sources
-------------
/tmp/debusine-fetch-exec-upload-8ison3xc/jigit_1.22-4.dsc exists in /tmp/debusine-fetch-exec-upload-8ison3xc; copying to chroot
I: NOTICE: Log filtering will replace 'build/jigit-rdxtg5/jigit-1.22' with '<<PKGBUILDDIR>>'
I: NOTICE: Log filtering will replace 'build/jigit-rdxtg5' with '<<BUILDDIR>>'
+------------------------------------------------------------------------------+
| Install package build dependencies |
+------------------------------------------------------------------------------+
Setup apt archive
-----------------
Merged Build-Depends: debhelper (>= 10), zlib1g-dev, libbz2-dev, build-essential, fakeroot
Filtered Build-Depends: debhelper (>= 10), zlib1g-dev, libbz2-dev, build-essential, fakeroot
dpkg-deb: warning: root directory has unusual owner or group 998:999.
Hint: either pass --root-owner-group, see dpkg-build-api(7) or add an explicit 'Rules-Requires-Root: no' in debian/control.
dpkg-deb: warning: ignoring 1 warning about the control file(s)
dpkg-deb: building package 'sbuild-build-depends-main-dummy' in '/<<RESOLVERDIR>>/apt_archive/sbuild-build-depends-main-dummy.deb'.
Ign:1 copy:/<<RESOLVERDIR>>/apt_archive ./ InRelease
Get:2 copy:/<<RESOLVERDIR>>/apt_archive ./ Release [609 B]
Ign:3 copy:/<<RESOLVERDIR>>/apt_archive ./ Release.gpg
Get:4 copy:/<<RESOLVERDIR>>/apt_archive ./ Sources [635 B]
Get:5 copy:/<<RESOLVERDIR>>/apt_archive ./ Packages [667 B]
Fetched 1911 B in 0s (169 kB/s)
Reading package lists...
Get:1 file:/<<BUILDDIR>>/resolver-Jj370o/apt_archive ./ InRelease
Ign:1 file:/<<BUILDDIR>>/resolver-Jj370o/apt_archive ./ InRelease
Get:2 file:/<<BUILDDIR>>/resolver-Jj370o/apt_archive ./ Release [606 B]
Get:2 file:/<<BUILDDIR>>/resolver-Jj370o/apt_archive ./ Release [606 B]
Get:3 file:/<<BUILDDIR>>/resolver-Jj370o/apt_archive ./ Release.gpg
Ign:3 file:/<<BUILDDIR>>/resolver-Jj370o/apt_archive ./ Release.gpg
Reading package lists...
Reading package lists...
Install main build dependencies (apt-based resolver)
----------------------------------------------------
Installing build dependencies
Reading package lists...
Building dependency tree...
Reading state information...
The following additional packages will be installed:
autoconf automake autopoint autotools-dev build-essential cpp cpp-14
cpp-14-aarch64-linux-gnu cpp-aarch64-linux-gnu debhelper dh-autoreconf
dh-strip-nondeterminism dwz fakeroot g++ g++-14 g++-14-aarch64-linux-gnu
g++-aarch64-linux-gnu gcc gcc-14 gcc-14-aarch64-linux-gnu
gcc-aarch64-linux-gnu libasan8 libbz2-dev libc-dev-bin libc6-dev libcc1-0
libcrypt-dev libdebhelper-perl libelf1t64 libfakeroot
libfile-stripnondeterminism-perl libgcc-14-dev libhwasan0 libisl23 libitm1
liblsan0 libmpc3 libmpfr6 libstdc++-14-dev libtool libtsan2 libubsan1
linux-libc-dev m4 po-debconf rpcsvc-proto zlib1g-dev
Suggested packages:
autoconf-archive gnu-standards autoconf-doc cpp-doc gcc-14-locales
cpp-14-doc dh-make gcc-14-doc gcc-multilib manpages-dev flex bison gdb
gcc-doc gdb-aarch64-linux-gnu libc-devtools glibc-doc libstdc++-14-doc
libtool-doc gfortran | fortran95-compiler gcj-jdk m4-doc libmail-box-perl
Recommended packages:
bzip2-doc manpages manpages-dev libarchive-cpio-perl libltdl-dev
libmail-sendmail-perl
The following NEW packages will be installed:
autoconf automake autopoint autotools-dev build-essential cpp cpp-14
cpp-14-aarch64-linux-gnu cpp-aarch64-linux-gnu debhelper dh-autoreconf
dh-strip-nondeterminism dwz fakeroot g++ g++-14 g++-14-aarch64-linux-gnu
g++-aarch64-linux-gnu gcc gcc-14 gcc-14-aarch64-linux-gnu
gcc-aarch64-linux-gnu libasan8 libbz2-dev libc-dev-bin libc6-dev libcc1-0
libcrypt-dev libdebhelper-perl libelf1t64 libfakeroot
libfile-stripnondeterminism-perl libgcc-14-dev libhwasan0 libisl23 libitm1
liblsan0 libmpc3 libmpfr6 libstdc++-14-dev libtool libtsan2 libubsan1
linux-libc-dev m4 po-debconf rpcsvc-proto sbuild-build-depends-main-dummy
zlib1g-dev
0 upgraded, 49 newly installed, 0 to remove and 0 not upgraded.
Need to get 61.9 MB of archives.
After this operation, 239 MB of additional disk space will be used.
Get:1 copy:/<<RESOLVERDIR>>/apt_archive ./ sbuild-build-depends-main-dummy 0.invalid.0 [896 B]
Get:2 http://deb.debian.org/debian sid/main arm64 m4 arm64 1.4.19-4 [277 kB]
Get:3 http://deb.debian.org/debian sid/main arm64 autoconf all 2.72-3 [493 kB]
Get:4 http://deb.debian.org/debian sid/main arm64 autotools-dev all 20220109.1 [51.6 kB]
Get:5 http://deb.debian.org/debian sid/main arm64 automake all 1:1.16.5-1.3 [823 kB]
Get:6 http://deb.debian.org/debian sid/main arm64 autopoint all 0.22.5-2 [723 kB]
Get:7 http://deb.debian.org/debian sid/main arm64 libc-dev-bin arm64 2.40-3 [50.9 kB]
Get:8 http://deb.debian.org/debian sid/main arm64 linux-libc-dev all 6.11.7-1 [2454 kB]
Get:9 http://deb.debian.org/debian sid/main arm64 libcrypt-dev arm64 1:4.4.36-5 [122 kB]
Get:10 http://deb.debian.org/debian sid/main arm64 rpcsvc-proto arm64 1.4.3-1+b1 [60.5 kB]
Get:11 http://deb.debian.org/debian sid/main arm64 libc6-dev arm64 2.40-3 [1591 kB]
Get:12 http://deb.debian.org/debian sid/main arm64 libisl23 arm64 0.27-1 [601 kB]
Get:13 http://deb.debian.org/debian sid/main arm64 libmpfr6 arm64 4.2.1-1+b2 [680 kB]
Get:14 http://deb.debian.org/debian sid/main arm64 libmpc3 arm64 1.3.1-1+b3 [50.5 kB]
Get:15 http://deb.debian.org/debian sid/main arm64 cpp-14-aarch64-linux-gnu arm64 14.2.0-8 [9166 kB]
Get:16 http://deb.debian.org/debian sid/main arm64 cpp-14 arm64 14.2.0-8 [1284 B]
Get:17 http://deb.debian.org/debian sid/main arm64 cpp-aarch64-linux-gnu arm64 4:14.2.0-1 [4832 B]
Get:18 http://deb.debian.org/debian sid/main arm64 cpp arm64 4:14.2.0-1 [1568 B]
Get:19 http://deb.debian.org/debian sid/main arm64 libcc1-0 arm64 14.2.0-8 [42.2 kB]
Get:20 http://deb.debian.org/debian sid/main arm64 libitm1 arm64 14.2.0-8 [24.2 kB]
Get:21 http://deb.debian.org/debian sid/main arm64 libasan8 arm64 14.2.0-8 [2579 kB]
Get:22 http://deb.debian.org/debian sid/main arm64 liblsan0 arm64 14.2.0-8 [1161 kB]
Get:23 http://deb.debian.org/debian sid/main arm64 libtsan2 arm64 14.2.0-8 [2386 kB]
Get:24 http://deb.debian.org/debian sid/main arm64 libubsan1 arm64 14.2.0-8 [1039 kB]
Get:25 http://deb.debian.org/debian sid/main arm64 libhwasan0 arm64 14.2.0-8 [1442 kB]
Get:26 http://deb.debian.org/debian sid/main arm64 libgcc-14-dev arm64 14.2.0-8 [2365 kB]
Get:27 http://deb.debian.org/debian sid/main arm64 gcc-14-aarch64-linux-gnu arm64 14.2.0-8 [17.7 MB]
Get:28 http://deb.debian.org/debian sid/main arm64 gcc-14 arm64 14.2.0-8 [519 kB]
Get:29 http://deb.debian.org/debian sid/main arm64 gcc-aarch64-linux-gnu arm64 4:14.2.0-1 [1440 B]
Get:30 http://deb.debian.org/debian sid/main arm64 gcc arm64 4:14.2.0-1 [5136 B]
Get:31 http://deb.debian.org/debian sid/main arm64 libstdc++-14-dev arm64 14.2.0-8 [2267 kB]
Get:32 http://deb.debian.org/debian sid/main arm64 g++-14-aarch64-linux-gnu arm64 14.2.0-8 [10.1 MB]
Get:33 http://deb.debian.org/debian sid/main arm64 g++-14 arm64 14.2.0-8 [20.2 kB]
Get:34 http://deb.debian.org/debian sid/main arm64 g++-aarch64-linux-gnu arm64 4:14.2.0-1 [1200 B]
Get:35 http://deb.debian.org/debian sid/main arm64 g++ arm64 4:14.2.0-1 [1332 B]
Get:36 http://deb.debian.org/debian sid/main arm64 build-essential arm64 12.12 [4624 B]
Get:37 http://deb.debian.org/debian sid/main arm64 libdebhelper-perl all 13.20 [89.7 kB]
Get:38 http://deb.debian.org/debian sid/main arm64 libtool all 2.4.7-8 [517 kB]
Get:39 http://deb.debian.org/debian sid/main arm64 dh-autoreconf all 20 [17.1 kB]
Get:40 http://deb.debian.org/debian sid/main arm64 libfile-stripnondeterminism-perl all 1.14.0-1 [19.5 kB]
Get:41 http://deb.debian.org/debian sid/main arm64 dh-strip-nondeterminism all 1.14.0-1 [8448 B]
Get:42 http://deb.debian.org/debian sid/main arm64 libelf1t64 arm64 0.192-4 [189 kB]
Get:43 http://deb.debian.org/debian sid/main arm64 dwz arm64 0.15-1+b1 [102 kB]
Get:44 http://deb.debian.org/debian sid/main arm64 po-debconf all 1.0.21+nmu1 [248 kB]
Get:45 http://deb.debian.org/debian sid/main arm64 debhelper all 13.20 [915 kB]
Get:46 http://deb.debian.org/debian sid/main arm64 libfakeroot arm64 1.36-1 [29.1 kB]
Get:47 http://deb.debian.org/debian sid/main arm64 fakeroot arm64 1.36-1 [74.4 kB]
Get:48 http://deb.debian.org/debian sid/main arm64 libbz2-dev arm64 1.0.8-6 [31.9 kB]
Get:49 http://deb.debian.org/debian sid/main arm64 zlib1g-dev arm64 1:1.3.dfsg+really1.3.1-1+b1 [917 kB]
debconf: delaying package configuration, since apt-utils is not installed
Fetched 61.9 MB in 1s (95.3 MB/s)
Selecting previously unselected package m4.
(Reading database ... 17119 files and directories currently installed.)
Preparing to unpack .../00-m4_1.4.19-4_arm64.deb ...
Unpacking m4 (1.4.19-4) ...
Selecting previously unselected package autoconf.
Preparing to unpack .../01-autoconf_2.72-3_all.deb ...
Unpacking autoconf (2.72-3) ...
Selecting previously unselected package autotools-dev.
Preparing to unpack .../02-autotools-dev_20220109.1_all.deb ...
Unpacking autotools-dev (20220109.1) ...
Selecting previously unselected package automake.
Preparing to unpack .../03-automake_1%3a1.16.5-1.3_all.deb ...
Unpacking automake (1:1.16.5-1.3) ...
Selecting previously unselected package autopoint.
Preparing to unpack .../04-autopoint_0.22.5-2_all.deb ...
Unpacking autopoint (0.22.5-2) ...
Selecting previously unselected package libc-dev-bin.
Preparing to unpack .../05-libc-dev-bin_2.40-3_arm64.deb ...
Unpacking libc-dev-bin (2.40-3) ...
Selecting previously unselected package linux-libc-dev.
Preparing to unpack .../06-linux-libc-dev_6.11.7-1_all.deb ...
Unpacking linux-libc-dev (6.11.7-1) ...
Selecting previously unselected package libcrypt-dev:arm64.
Preparing to unpack .../07-libcrypt-dev_1%3a4.4.36-5_arm64.deb ...
Unpacking libcrypt-dev:arm64 (1:4.4.36-5) ...
Selecting previously unselected package rpcsvc-proto.
Preparing to unpack .../08-rpcsvc-proto_1.4.3-1+b1_arm64.deb ...
Unpacking rpcsvc-proto (1.4.3-1+b1) ...
Selecting previously unselected package libc6-dev:arm64.
Preparing to unpack .../09-libc6-dev_2.40-3_arm64.deb ...
Unpacking libc6-dev:arm64 (2.40-3) ...
Selecting previously unselected package libisl23:arm64.
Preparing to unpack .../10-libisl23_0.27-1_arm64.deb ...
Unpacking libisl23:arm64 (0.27-1) ...
Selecting previously unselected package libmpfr6:arm64.
Preparing to unpack .../11-libmpfr6_4.2.1-1+b2_arm64.deb ...
Unpacking libmpfr6:arm64 (4.2.1-1+b2) ...
Selecting previously unselected package libmpc3:arm64.
Preparing to unpack .../12-libmpc3_1.3.1-1+b3_arm64.deb ...
Unpacking libmpc3:arm64 (1.3.1-1+b3) ...
Selecting previously unselected package cpp-14-aarch64-linux-gnu.
Preparing to unpack .../13-cpp-14-aarch64-linux-gnu_14.2.0-8_arm64.deb ...
Unpacking cpp-14-aarch64-linux-gnu (14.2.0-8) ...
Selecting previously unselected package cpp-14.
Preparing to unpack .../14-cpp-14_14.2.0-8_arm64.deb ...
Unpacking cpp-14 (14.2.0-8) ...
Selecting previously unselected package cpp-aarch64-linux-gnu.
Preparing to unpack .../15-cpp-aarch64-linux-gnu_4%3a14.2.0-1_arm64.deb ...
Unpacking cpp-aarch64-linux-gnu (4:14.2.0-1) ...
Selecting previously unselected package cpp.
Preparing to unpack .../16-cpp_4%3a14.2.0-1_arm64.deb ...
Unpacking cpp (4:14.2.0-1) ...
Selecting previously unselected package libcc1-0:arm64.
Preparing to unpack .../17-libcc1-0_14.2.0-8_arm64.deb ...
Unpacking libcc1-0:arm64 (14.2.0-8) ...
Selecting previously unselected package libitm1:arm64.
Preparing to unpack .../18-libitm1_14.2.0-8_arm64.deb ...
Unpacking libitm1:arm64 (14.2.0-8) ...
Selecting previously unselected package libasan8:arm64.
Preparing to unpack .../19-libasan8_14.2.0-8_arm64.deb ...
Unpacking libasan8:arm64 (14.2.0-8) ...
Selecting previously unselected package liblsan0:arm64.
Preparing to unpack .../20-liblsan0_14.2.0-8_arm64.deb ...
Unpacking liblsan0:arm64 (14.2.0-8) ...
Selecting previously unselected package libtsan2:arm64.
Preparing to unpack .../21-libtsan2_14.2.0-8_arm64.deb ...
Unpacking libtsan2:arm64 (14.2.0-8) ...
Selecting previously unselected package libubsan1:arm64.
Preparing to unpack .../22-libubsan1_14.2.0-8_arm64.deb ...
Unpacking libubsan1:arm64 (14.2.0-8) ...
Selecting previously unselected package libhwasan0:arm64.
Preparing to unpack .../23-libhwasan0_14.2.0-8_arm64.deb ...
Unpacking libhwasan0:arm64 (14.2.0-8) ...
Selecting previously unselected package libgcc-14-dev:arm64.
Preparing to unpack .../24-libgcc-14-dev_14.2.0-8_arm64.deb ...
Unpacking libgcc-14-dev:arm64 (14.2.0-8) ...
Selecting previously unselected package gcc-14-aarch64-linux-gnu.
Preparing to unpack .../25-gcc-14-aarch64-linux-gnu_14.2.0-8_arm64.deb ...
Unpacking gcc-14-aarch64-linux-gnu (14.2.0-8) ...
Selecting previously unselected package gcc-14.
Preparing to unpack .../26-gcc-14_14.2.0-8_arm64.deb ...
Unpacking gcc-14 (14.2.0-8) ...
Selecting previously unselected package gcc-aarch64-linux-gnu.
Preparing to unpack .../27-gcc-aarch64-linux-gnu_4%3a14.2.0-1_arm64.deb ...
Unpacking gcc-aarch64-linux-gnu (4:14.2.0-1) ...
Selecting previously unselected package gcc.
Preparing to unpack .../28-gcc_4%3a14.2.0-1_arm64.deb ...
Unpacking gcc (4:14.2.0-1) ...
Selecting previously unselected package libstdc++-14-dev:arm64.
Preparing to unpack .../29-libstdc++-14-dev_14.2.0-8_arm64.deb ...
Unpacking libstdc++-14-dev:arm64 (14.2.0-8) ...
Selecting previously unselected package g++-14-aarch64-linux-gnu.
Preparing to unpack .../30-g++-14-aarch64-linux-gnu_14.2.0-8_arm64.deb ...
Unpacking g++-14-aarch64-linux-gnu (14.2.0-8) ...
Selecting previously unselected package g++-14.
Preparing to unpack .../31-g++-14_14.2.0-8_arm64.deb ...
Unpacking g++-14 (14.2.0-8) ...
Selecting previously unselected package g++-aarch64-linux-gnu.
Preparing to unpack .../32-g++-aarch64-linux-gnu_4%3a14.2.0-1_arm64.deb ...
Unpacking g++-aarch64-linux-gnu (4:14.2.0-1) ...
Selecting previously unselected package g++.
Preparing to unpack .../33-g++_4%3a14.2.0-1_arm64.deb ...
Unpacking g++ (4:14.2.0-1) ...
Selecting previously unselected package build-essential.
Preparing to unpack .../34-build-essential_12.12_arm64.deb ...
Unpacking build-essential (12.12) ...
Selecting previously unselected package libdebhelper-perl.
Preparing to unpack .../35-libdebhelper-perl_13.20_all.deb ...
Unpacking libdebhelper-perl (13.20) ...
Selecting previously unselected package libtool.
Preparing to unpack .../36-libtool_2.4.7-8_all.deb ...
Unpacking libtool (2.4.7-8) ...
Selecting previously unselected package dh-autoreconf.
Preparing to unpack .../37-dh-autoreconf_20_all.deb ...
Unpacking dh-autoreconf (20) ...
Selecting previously unselected package libfile-stripnondeterminism-perl.
Preparing to unpack .../38-libfile-stripnondeterminism-perl_1.14.0-1_all.deb ...
Unpacking libfile-stripnondeterminism-perl (1.14.0-1) ...
Selecting previously unselected package dh-strip-nondeterminism.
Preparing to unpack .../39-dh-strip-nondeterminism_1.14.0-1_all.deb ...
Unpacking dh-strip-nondeterminism (1.14.0-1) ...
Selecting previously unselected package libelf1t64:arm64.
Preparing to unpack .../40-libelf1t64_0.192-4_arm64.deb ...
Unpacking libelf1t64:arm64 (0.192-4) ...
Selecting previously unselected package dwz.
Preparing to unpack .../41-dwz_0.15-1+b1_arm64.deb ...
Unpacking dwz (0.15-1+b1) ...
Selecting previously unselected package po-debconf.
Preparing to unpack .../42-po-debconf_1.0.21+nmu1_all.deb ...
Unpacking po-debconf (1.0.21+nmu1) ...
Selecting previously unselected package debhelper.
Preparing to unpack .../43-debhelper_13.20_all.deb ...
Unpacking debhelper (13.20) ...
Selecting previously unselected package libfakeroot:arm64.
Preparing to unpack .../44-libfakeroot_1.36-1_arm64.deb ...
Unpacking libfakeroot:arm64 (1.36-1) ...
Selecting previously unselected package fakeroot.
Preparing to unpack .../45-fakeroot_1.36-1_arm64.deb ...
Unpacking fakeroot (1.36-1) ...
Selecting previously unselected package libbz2-dev:arm64.
Preparing to unpack .../46-libbz2-dev_1.0.8-6_arm64.deb ...
Unpacking libbz2-dev:arm64 (1.0.8-6) ...
Selecting previously unselected package zlib1g-dev:arm64.
Preparing to unpack .../47-zlib1g-dev_1%3a1.3.dfsg+really1.3.1-1+b1_arm64.deb ...
Unpacking zlib1g-dev:arm64 (1:1.3.dfsg+really1.3.1-1+b1) ...
Selecting previously unselected package sbuild-build-depends-main-dummy.
Preparing to unpack .../48-sbuild-build-depends-main-dummy_0.invalid.0_arm64.deb ...
Unpacking sbuild-build-depends-main-dummy (0.invalid.0) ...
Setting up libfile-stripnondeterminism-perl (1.14.0-1) ...
Setting up po-debconf (1.0.21+nmu1) ...
Setting up libdebhelper-perl (13.20) ...
Setting up linux-libc-dev (6.11.7-1) ...
Setting up m4 (1.4.19-4) ...
Setting up libfakeroot:arm64 (1.36-1) ...
Setting up libelf1t64:arm64 (0.192-4) ...
Setting up fakeroot (1.36-1) ...
update-alternatives: using /usr/bin/fakeroot-sysv to provide /usr/bin/fakeroot (fakeroot) in auto mode
Setting up autotools-dev (20220109.1) ...
Setting up rpcsvc-proto (1.4.3-1+b1) ...
Setting up libmpfr6:arm64 (4.2.1-1+b2) ...
Setting up libmpc3:arm64 (1.3.1-1+b3) ...
Setting up autopoint (0.22.5-2) ...
Setting up autoconf (2.72-3) ...
Setting up libubsan1:arm64 (14.2.0-8) ...
Setting up dh-strip-nondeterminism (1.14.0-1) ...
Setting up dwz (0.15-1+b1) ...
Setting up libhwasan0:arm64 (14.2.0-8) ...
Setting up libcrypt-dev:arm64 (1:4.4.36-5) ...
Setting up libasan8:arm64 (14.2.0-8) ...
Setting up libtsan2:arm64 (14.2.0-8) ...
Setting up libisl23:arm64 (0.27-1) ...
Setting up libc-dev-bin (2.40-3) ...
Setting up libcc1-0:arm64 (14.2.0-8) ...
Setting up liblsan0:arm64 (14.2.0-8) ...
Setting up libitm1:arm64 (14.2.0-8) ...
Setting up automake (1:1.16.5-1.3) ...
update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode
Setting up cpp-14-aarch64-linux-gnu (14.2.0-8) ...
Setting up libc6-dev:arm64 (2.40-3) ...
Setting up libgcc-14-dev:arm64 (14.2.0-8) ...
Setting up libstdc++-14-dev:arm64 (14.2.0-8) ...
Setting up libbz2-dev:arm64 (1.0.8-6) ...
Setting up cpp-aarch64-linux-gnu (4:14.2.0-1) ...
Setting up cpp-14 (14.2.0-8) ...
Setting up zlib1g-dev:arm64 (1:1.3.dfsg+really1.3.1-1+b1) ...
Setting up cpp (4:14.2.0-1) ...
Setting up gcc-14-aarch64-linux-gnu (14.2.0-8) ...
Setting up gcc-aarch64-linux-gnu (4:14.2.0-1) ...
Setting up g++-14-aarch64-linux-gnu (14.2.0-8) ...
Setting up gcc-14 (14.2.0-8) ...
Setting up g++-aarch64-linux-gnu (4:14.2.0-1) ...
Setting up g++-14 (14.2.0-8) ...
Setting up libtool (2.4.7-8) ...
Setting up gcc (4:14.2.0-1) ...
Setting up dh-autoreconf (20) ...
Setting up g++ (4:14.2.0-1) ...
update-alternatives: using /usr/bin/g++ to provide /usr/bin/c++ (c++) in auto mode
Setting up build-essential (12.12) ...
Setting up debhelper (13.20) ...
Setting up sbuild-build-depends-main-dummy (0.invalid.0) ...
Processing triggers for man-db (2.13.0-1) ...
Processing triggers for libc-bin (2.40-3) ...
+------------------------------------------------------------------------------+
| Check architectures |
+------------------------------------------------------------------------------+
Arch check ok (arm64 included in any)
+------------------------------------------------------------------------------+
| Build environment |
+------------------------------------------------------------------------------+
Kernel: Linux 6.1.0-27-cloud-arm64 #1 SMP Debian 6.1.115-1 (2024-11-01) arm64 (aarch64)
Toolchain package versions: binutils_2.43.1-5 dpkg-dev_1.22.12~1.gbp82cafd g++-14_14.2.0-8 gcc-14_14.2.0-8 libc6-dev_2.40-3 libstdc++-14-dev_14.2.0-8 libstdc++6_14.2.0-8 linux-libc-dev_6.11.7-1
Package versions: appstream_1.0.3-1+b1 apt_2.9.11 autoconf_2.72-3 automake_1:1.16.5-1.3 autopoint_0.22.5-2 autotools-dev_20220109.1 base-files_13.5 base-passwd_3.6.5 bash_5.2.32-1+b2 binutils_2.43.1-5 binutils-aarch64-linux-gnu_2.43.1-5 binutils-common_2.43.1-5 bsdextrautils_2.40.2-11 bsdutils_1:2.40.2-11 build-essential_12.12 bzip2_1.0.8-6 ca-certificates_20240203 coreutils_9.5-1+b1 cpp_4:14.2.0-1 cpp-14_14.2.0-8 cpp-14-aarch64-linux-gnu_14.2.0-8 cpp-aarch64-linux-gnu_4:14.2.0-1 dash_0.5.12-9+b1 debconf_1.5.87 debhelper_13.20 debian-archive-keyring_2023.4 debianutils_5.21 dh-autoreconf_20 dh-strip-nondeterminism_1.14.0-1 diffstat_1.66-1+b1 diffutils_1:3.10-1+b1 dpkg_1.22.12~1.gbp82cafd dpkg-dev_1.22.12~1.gbp82cafd dwz_0.15-1+b1 e2fsprogs_1.47.1-1+b1 fakeroot_1.36-1 file_1:5.45-3+b1 findutils_4.10.0-3 g++_4:14.2.0-1 g++-14_14.2.0-8 g++-14-aarch64-linux-gnu_14.2.0-8 g++-aarch64-linux-gnu_4:14.2.0-1 gcc_4:14.2.0-1 gcc-14_14.2.0-8 gcc-14-aarch64-linux-gnu_14.2.0-8 gcc-14-base_14.2.0-8 gcc-aarch64-linux-gnu_4:14.2.0-1 gettext_0.22.5-2 gettext-base_0.22.5-2 gpg_2.2.45-2 gpgconf_2.2.45-2 gpgv_2.2.45-2 grep_3.11-4+b1 groff-base_1.23.0-5 gzip_1.12-1.1+b1 hostname_3.25 init-system-helpers_1.67 intltool-debian_0.35.0+20060710.6 iso-codes_4.17.0-1 libacl1_2.3.2-2+b1 libaliased-perl_0.34-3 libappstream5_1.0.3-1+b1 libapt-pkg-perl_0.1.40+b6 libapt-pkg6.0t64_2.9.11 libarchive-zip-perl_1.68-1 libasan8_14.2.0-8 libassuan9_3.0.1-2 libatomic1_14.2.0-8 libattr1_1:2.5.2-2 libaudit-common_1:4.0.2-2 libaudit1_1:4.0.2-2 libb-hooks-endofscope-perl_0.28-1 libb-hooks-op-check-perl_0.22-3+b2 libberkeleydb-perl_0.66-1 libbinutils_2.43.1-5 libblkid1_2.40.2-11 libbrotli1_1.1.0-2+b6 libbsd0_0.12.2-2 libbz2-1.0_1.0.8-6 libbz2-dev_1.0.8-6 libc-bin_2.40-3 libc-dev-bin_2.40-3 libc6_2.40-3 libc6-dev_2.40-3 libcap-ng0_0.8.5-3+b1 libcap2_1:2.66-5+b1 libcapture-tiny-perl_0.48-2 libcc1-0_14.2.0-8 libcgi-pm-perl_4.66-1 libclass-data-inheritable-perl_0.10-1 libclass-inspector-perl_1.36-3 libclass-method-modifiers-perl_2.15-1 libclass-xsaccessor-perl_1.19-4+b4 libclone-perl_0.47-1+b1 libcom-err2_1.47.1-1+b1 libconfig-tiny-perl_2.30-1 libconst-fast-perl_0.014-2 libcpanel-json-xs-perl_4.38-1+b1 libcrypt-dev_1:4.4.36-5 libcrypt1_1:4.4.36-5 libctf-nobfd0_2.43.1-5 libctf0_2.43.1-5 libcurl3t64-gnutls_8.11.0-1 libdata-dpath-perl_0.60-1 libdata-messagepack-perl_1.02-1+b4 libdata-optlist-perl_0.114-1 libdata-validate-domain-perl_0.15-1 libdata-validate-ip-perl_0.31-1 libdata-validate-uri-perl_0.07-3 libdb5.3t64_5.3.28+dfsg2-9 libdebconfclient0_0.273 libdebhelper-perl_13.20 libdevel-callchecker-perl_0.009-1+b1 libdevel-size-perl_0.84-1+b1 libdevel-stacktrace-perl_2.0500-1 libdpkg-perl_1.22.12~1.gbp82cafd libdynaloader-functions-perl_0.004-1 libelf1t64_0.192-4 libemail-address-xs-perl_1.05-1+b4 libencode-locale-perl_1.05-3 libexception-class-perl_1.45-1 libext2fs2t64_1.47.1-1+b1 libfakeroot_1.36-1 libffi8_3.4.6-1 libfile-basedir-perl_0.09-2 libfile-find-rule-perl_0.34-3 libfile-listing-perl_6.16-1 libfile-sharedir-perl_1.118-3 libfile-stripnondeterminism-perl_1.14.0-1 libfont-ttf-perl_1.06-2 libgcc-14-dev_14.2.0-8 libgcc-s1_14.2.0-8 libgcrypt20_1.11.0-6 libgdbm-compat4t64_1.24-2 libgdbm6t64_1.24-2 libglib2.0-0t64_2.82.2-3 libgmp10_2:6.3.0+dfsg-2+b2 libgnutls30t64_3.8.8-2 libgomp1_14.2.0-8 libgpg-error0_1.50-4 libgprofng0_2.43.1-5 libgssapi-krb5-2_1.21.3-3 libhogweed6t64_3.10-1+b1 libhtml-form-perl_6.12-1 libhtml-html5-entities-perl_0.004-3 libhtml-parser-perl_3.83-1+b1 libhtml-tagset-perl_3.24-1 libhtml-tokeparser-simple-perl_3.16-4 libhtml-tree-perl_5.07-3 libhttp-cookies-perl_6.11-1 libhttp-date-perl_6.06-1 libhttp-message-perl_7.00-2 libhttp-negotiate-perl_6.01-2 libhwasan0_14.2.0-8 libicu72_72.1-5+b1 libidn2-0_2.3.7-2+b1 libimport-into-perl_1.002005-2 libio-html-perl_1.004-3 libio-interactive-perl_1.025-1 libio-socket-ssl-perl_2.089-1 libio-string-perl_1.08-4 libipc-run3-perl_0.049-1 libipc-system-simple-perl_1.30-2 libisl23_0.27-1 libiterator-perl_0.03+ds1-2 libiterator-util-perl_0.02+ds1-2 libitm1_14.2.0-8 libjansson4_2.14-2+b3 libjson-maybexs-perl_1.004008-1 libk5crypto3_1.21.3-3 libkeyutils1_1.6.3-4 libkrb5-3_1.21.3-3 libkrb5support0_1.21.3-3 libldap-2.5-0_2.5.18+dfsg-3+b1 liblist-compare-perl_0.55-2 liblist-someutils-perl_0.59-1 liblist-utilsby-perl_0.12-2 liblsan0_14.2.0-8 liblwp-mediatypes-perl_6.04-2 liblwp-protocol-https-perl_6.14-1 liblz1_1.15~pre2-1 liblz4-1_1.9.4-3+b1 liblzma5_5.6.3-1+b1 liblzo2-2_2.10-3+b1 libmagic-mgc_1:5.45-3+b1 libmagic1t64_1:5.45-3+b1 libmarkdown2_2.2.7-2.1 libmd0_1.1.0-2+b1 libmldbm-perl_2.05-4 libmodule-implementation-perl_0.09-2 libmodule-runtime-perl_0.016-2 libmoo-perl_2.005005-1 libmoox-aliases-perl_0.001006-2 libmount1_2.40.2-11 libmouse-perl_2.5.11-1+b1 libmpc3_1.3.1-1+b3 libmpfr6_4.2.1-1+b2 libnamespace-clean-perl_0.27-2 libnet-domain-tld-perl_1.75-4 libnet-http-perl_6.23-1 libnet-ipv6addr-perl_1.02-1 libnet-netmask-perl_2.0002-2 libnet-ssleay-perl_1.94-2 libnetaddr-ip-perl_4.079+dfsg-2+b4 libnettle8t64_3.10-1+b1 libnghttp2-14_1.64.0-1 libnghttp3-9_1.4.0-1+b1 libngtcp2-16_1.6.0-1 libngtcp2-crypto-gnutls8_1.6.0-1 libnumber-compare-perl_0.03-3 libp11-kit0_0.25.5-2+b1 libpackage-stash-perl_0.40-1 libpam-modules_1.5.3-7+b1 libpam-modules-bin_1.5.3-7+b1 libpam-runtime_1.5.3-7 libpam0g_1.5.3-7+b1 libparams-classify-perl_0.015-2+b4 libparams-util-perl_1.102-3+b1 libpath-tiny-perl_0.146-1 libpcre2-8-0_10.44-4 libperl5.40_5.40.0-7 libperlio-gzip-perl_0.20-1+b4 libperlio-utf8-strict-perl_0.010-1+b3 libpipeline1_1.5.8-1 libproc-processtable-perl_0.636-1+b3 libpsl5t64_0.21.2-1.1+b1 libreadline8t64_8.2-5 libregexp-wildcards-perl_1.05-3 librole-tiny-perl_2.002004-1 librtmp1_2.4+20151223.gitfa8646d.1-2+b5 libsasl2-2_2.1.28+dfsg1-8 libsasl2-modules-db_2.1.28+dfsg1-8 libseccomp2_2.5.5-1+b3 libselinux1_3.7-3+b1 libsemanage-common_3.7-2 libsemanage2_3.7-2+b1 libsepol2_3.7-1 libsereal-decoder-perl_5.004+ds-1+b3 libsereal-encoder-perl_5.004+ds-1+b3 libsframe1_2.43.1-5 libsmartcols1_2.40.2-11 libsort-versions-perl_1.62-3 libsqlite3-0_3.46.1-1 libss2_1.47.1-1+b1 libssh2-1t64_1.11.1-1 libssl3t64_3.3.2-2 libstdc++-14-dev_14.2.0-8 libstdc++6_14.2.0-8 libstemmer0d_2.2.0-4+b2 libstrictures-perl_2.000006-1 libsub-exporter-perl_0.990-1 libsub-exporter-progressive-perl_0.001013-3 libsub-identify-perl_0.14-3+b3 libsub-install-perl_0.929-1 libsub-name-perl_0.27-1+b3 libsub-quote-perl_2.006008-1 libsyntax-keyword-try-perl_0.30-1+b1 libsystemd0_257~rc2-3 libtasn1-6_4.19.0-3+b3 libterm-readkey-perl_2.38-2+b4 libtext-glob-perl_0.11-3 libtext-levenshteinxs-perl_0.03-5+b4 libtext-markdown-discount-perl_0.16-1+b3 libtext-xslate-perl_3.5.9-2+b1 libtime-duration-perl_1.21-2 libtime-moment-perl_0.44-2+b4 libtimedate-perl_2.3300-2 libtinfo6_6.5-2+b1 libtool_2.4.7-8 libtry-tiny-perl_0.32-1 libtsan2_14.2.0-8 libubsan1_14.2.0-8 libuchardet0_0.0.8-1+b2 libudev1_257~rc2-3 libunicode-utf8-perl_0.62-2+b3 libunistring5_1.2-1+b1 liburi-perl_5.30-1 libuuid1_2.40.2-11 libvariable-magic-perl_0.64-1+b1 libwww-mechanize-perl_2.19-1 libwww-perl_6.77-1 libwww-robotrules-perl_6.02-1 libxml-libxml-perl_2.0207+dfsg+really+2.0134-5+b1 libxml-namespacesupport-perl_1.12-2 libxml-sax-base-perl_1.09-3 libxml-sax-perl_1.02+dfsg-3 libxml2_2.12.7+dfsg+really2.9.14-0.2+b1 libxmlb2_0.3.21-1 libxs-parse-keyword-perl_0.46-1+b1 libxxhash0_0.8.2-2+b2 libyaml-0-2_0.2.5-1+b2 libyaml-libyaml-perl_0.902.0+ds-2+b1 libzstd1_1.5.6+dfsg-1+b1 lintian_2.120.0 linux-libc-dev_6.11.7-1 login_1:4.16.0-2+really2.40.2-11 login.defs_1:4.16.0-5 logsave_1.47.1-1+b1 lzop_1.04-2+b1 m4_1.4.19-4 make_4.3-4.1+b1 man-db_2.13.0-1 mawk_1.3.4.20240905-1 mount_2.40.2-11 ncurses-base_6.5-2 ncurses-bin_6.5-2+b1 netbase_6.4 openssl_3.3.2-2 openssl-provider-legacy_3.3.2-2 passwd_1:4.16.0-5 patch_2.7.6-7+b1 patchutils_0.4.2-1+b1 perl_5.40.0-7 perl-base_5.40.0-7 perl-modules-5.40_5.40.0-7 perl-openssl-defaults_7+b2 plzip_1.11-2 po-debconf_1.0.21+nmu1 readline-common_8.2-5 rpcsvc-proto_1.4.3-1+b1 sbuild-build-depends-main-dummy_0.invalid.0 sed_4.9-2+b1 sensible-utils_0.0.24 shared-mime-info_2.4-5+b1 sysvinit-utils_3.11-1 t1utils_1.41-4+b1 tar_1.35+dfsg-3+b1 tzdata_2024b-3 ucf_3.0043+nmu1 unzip_6.0-28+b1 util-linux_2.40.2-11 xz-utils_5.6.3-1+b1 zlib1g_1:1.3.dfsg+really1.3.1-1+b1 zlib1g-dev_1:1.3.dfsg+really1.3.1-1+b1
+------------------------------------------------------------------------------+
| Build |
+------------------------------------------------------------------------------+
Unpack source
-------------
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA256
Format: 3.0 (quilt)
Source: jigit
Binary: jigit, libjte2, libjte-dev
Architecture: any
Version: 1.22-4
Maintainer: Steve McIntyre <93sam@debian.org>
Homepage: https://www.einval.com/~steve/software/JTE/
Standards-Version: 4.3.0
Build-Depends: debhelper (>= 10), zlib1g-dev, libbz2-dev
Package-List:
jigit deb utils optional arch=any
libjte-dev deb libdevel optional arch=any
libjte2 deb libs optional arch=any
Checksums-Sha1:
4be1474a9493271f5a1fb99a2dae050338d72c83 307884 jigit_1.22.orig.tar.xz
ef096b64f984eb62265a562202e9d728e1d2ccd8 4928 jigit_1.22-4.debian.tar.xz
Checksums-Sha256:
8a1da3fb7b817174c6c19d71ede19a4b8d0ae433fc5e967d33abf74b545f9954 307884 jigit_1.22.orig.tar.xz
39f28c6967746d787153e1e057fd0bc6be2e90e75eb585309181c9debd16e275 4928 jigit_1.22-4.debian.tar.xz
Files:
faea58b814646ab06f11b33555fe30f2 307884 jigit_1.22.orig.tar.xz
a3f1888a3b58a9ce5521a32074f7ca16 4928 jigit_1.22-4.debian.tar.xz
-----BEGIN PGP SIGNATURE-----
iQJFBAEBCAAvFiEEzrtSMB1hfpEDkP4WWHl5VzRCaE4FAmTMHT8RHDkzc2FtQGRl
Ymlhbi5vcmcACgkQWHl5VzRCaE7B7xAAoaGzd1jY0hyKPj0lOVDudw4NY3IONZVy
H0KJYQ+EFVLg8xthNt+DX8SkwYDdGfHESKJBVQY+rrlt/hAjWR5oVLvUcNQRkyuF
7hi8Wjz9Ou1Yp4uy2/I4Xkmv1nr5xvpTcQ5USYZCMR4Toz/TbdTg5skAjLzFRpSa
ErBxH9mwMD4aYbs1ZvuiVfZv0eDXC3V4LYIUJxEvoE/AQqQ64pbGXqMGG8Bj0ZkO
ea5/40gZit7Mqjm/hTrhGlkOw/zLPINaYvHE1jD9D+ChoBKBzj5km50ASMjnn8Vj
Hci7ffqkpTm0RewkmBDVs4QE0e3BpKnbpeshw/59V1dvWvP9jHldTxbegePLWLO3
qUuYdhK32XyG/LHnOhkP2lo/+fxXluT4qOkae6RK6QpdikeKsiKf5qmRv0QGreqK
TsrTGjWHODhYAIN/ulgb8xfSRIBTOs+Y0M1bexG5dVg00K2pXmRe7sWaBq5KtaeM
67NQ+xH7H1e1CkMImoavclQWRNMEUH/kC8x2cY/AfrJ+b7PcQ+oAGbrma7KGTfzT
8abMUkNPSxPX6a9EWUZ1wv08hgTSbkF0QgMoGSYNzBMTYC1RqzJ6h9dcmh8RkOJR
ba2wj4flTzvRinXm1pDsZ3ujdkqdcxfyKN8kP2FA6KKSFrPhcXcuxl4azwBsazDj
VhpVi9ZdWbk=
=9RpY
-----END PGP SIGNATURE-----
gpgv: Signature made Thu Aug 3 21:33:51 2023 UTC
gpgv: using RSA key CEBB52301D617E910390FE16587979573442684E
gpgv: issuer "93sam@debian.org"
gpgv: Can't check signature: No public key
dpkg-source: warning: cannot verify inline signature for ./jigit_1.22-4.dsc: no acceptable signature found
dpkg-source: info: extracting jigit in /<<PKGBUILDDIR>>
dpkg-source: info: unpacking jigit_1.22.orig.tar.xz
dpkg-source: info: unpacking jigit_1.22-4.debian.tar.xz
Check disk space
----------------
Sufficient free space for build
User Environment
----------------
APT_CONFIG=/var/lib/sbuild/apt.conf
HOME=/sbuild-nonexistent
LANG=en_US.UTF-8
LC_ALL=C.UTF-8
LOGNAME=debusine-worker
PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games
SHELL=/bin/sh
USER=debusine-worker
dpkg-buildpackage
-----------------
Command: dpkg-buildpackage -us -uc -b -rfakeroot
dpkg-buildpackage: info: source package jigit
dpkg-buildpackage: info: source version 1.22-4
dpkg-buildpackage: info: source distribution unstable
dpkg-buildpackage: info: source changed by Steve McIntyre <93sam@debian.org>
dpkg-source --before-build .
dpkg-buildpackage: info: host architecture arm64
debian/rules clean
dh_testdir
dh_testroot
rm -f build-stamp
# Add here commands to clean up after the build process.
/usr/bin/make clean
make[1]: Entering directory '/<<PKGBUILDDIR>>'
rm -f *.o jigdump jigit-mkimage jigsum jigsum-sha256 rsyncsum lib extract-data parallel-sums *~ build-stamp
make -C libjte clean
make[2]: Entering directory '/<<PKGBUILDDIR>>/libjte'
make[2]: *** No rule to make target 'clean'. Stop.
make[2]: Leaving directory '/<<PKGBUILDDIR>>/libjte'
make[1]: [Makefile:40: clean] Error 2 (ignored)
make[1]: Leaving directory '/<<PKGBUILDDIR>>'
/usr/bin/make distclean
make[1]: Entering directory '/<<PKGBUILDDIR>>'
rm -f *.o jigdump jigit-mkimage jigsum jigsum-sha256 rsyncsum lib extract-data parallel-sums *~ build-stamp
make -C libjte clean
make[2]: Entering directory '/<<PKGBUILDDIR>>/libjte'
make[2]: *** No rule to make target 'clean'. Stop.
make[2]: Leaving directory '/<<PKGBUILDDIR>>/libjte'
make[1]: [Makefile:40: clean] Error 2 (ignored)
make -C libjte distclean
make[2]: Entering directory '/<<PKGBUILDDIR>>/libjte'
make[2]: *** No rule to make target 'distclean'. Stop.
make[2]: Leaving directory '/<<PKGBUILDDIR>>/libjte'
make[1]: [Makefile:43: distclean] Error 2 (ignored)
make[1]: Leaving directory '/<<PKGBUILDDIR>>'
dh_autoreconf_clean
dh_clean
debian/rules binary
dh_testdir
# Add here commands to compile the package.
AUTOMAKE='automake --foreign' dh_autoreconf
libtoolize: putting auxiliary files in '.'.
libtoolize: copying file './ltmain.sh'
libtoolize: putting macros in AC_CONFIG_MACRO_DIRS, './'.
libtoolize: copying file './/libtool.m4'
libtoolize: copying file './/ltoptions.m4'
libtoolize: copying file './/ltsugar.m4'
libtoolize: copying file './/ltversion.m4'
libtoolize: copying file './/lt~obsolete.m4'
configure.ac:68: warning: The macro 'AC_PROG_LIBTOOL' is obsolete.
configure.ac:68: You should run autoupdate.
libtool.m4:100: AC_PROG_LIBTOOL is expanded from...
configure.ac:68: the top level
configure.ac:156: warning: The macro 'AC_TRY_LINK' is obsolete.
configure.ac:156: You should run autoupdate.
./lib/autoconf/general.m4:2918: AC_TRY_LINK is expanded from...
acinclude.m4:43: LIBJTE_ASSERT_VERS_LIBS is expanded from...
configure.ac:156: the top level
configure.ac:183: warning: AC_C_BIGENDIAN should be used with AC_CONFIG_HEADERS
configure.ac:55: installing './compile'
configure.ac:16: installing './missing'
Makefile.am: installing './depcomp'
dh_auto_configure --sourcedirectory libjte
cd libjte && ./configure --build=aarch64-linux-gnu --prefix=/usr --includedir=\${prefix}/include --mandir=\${prefix}/share/man --infodir=\${prefix}/share/info --sysconfdir=/etc --localstatedir=/var --disable-option-checking --disable-silent-rules --libdir=\${prefix}/lib/aarch64-linux-gnu --libexecdir=\${prefix}/lib/aarch64-linux-gnu --disable-maintainer-mode --disable-dependency-tracking
checking build system type... aarch64-unknown-linux-gnu
checking host system type... aarch64-unknown-linux-gnu
checking target system type... aarch64-unknown-linux-gnu
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a race-free mkdir -p... /usr/bin/mkdir -p
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking whether make supports nested variables... yes
checking whether to enable maintainer-specific portions of Makefiles... no
checking whether make supports the include directive... yes (GNU style)
checking for gcc... gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether the compiler supports GNU C... yes
checking whether gcc accepts -g... yes
checking for gcc option to enable C11 features... none needed
checking whether gcc understands -c and -o together... yes
checking dependency style of gcc... none
checking for an ANSI C-conforming const... yes
checking for inline... inline
checking for stdio.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for strings.h... yes
checking for sys/stat.h... yes
checking for sys/types.h... yes
checking for unistd.h... yes
checking whether byte ordering is bigendian... no
checking for gcc option to enable large file support... none needed
checking for declarations of fseeko and ftello... yes
checking for fseeko... yes
checking how to print strings... printf
checking for a sed that does not truncate output... /usr/bin/sed
checking for grep that handles long lines and -e... /usr/bin/grep
checking for egrep... /usr/bin/grep -E
checking for fgrep... /usr/bin/grep -F
checking for ld used by gcc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B
checking the name lister (/usr/bin/nm -B) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 1572864
checking how to convert aarch64-unknown-linux-gnu file names to aarch64-unknown-linux-gnu format... func_convert_file_noop
checking how to convert aarch64-unknown-linux-gnu file names to toolchain format... func_convert_file_noop
checking for /usr/bin/ld option to reload object files... -r
checking for file... file
checking for objdump... objdump
checking how to recognize dependent libraries... pass_all
checking for dlltool... no
checking how to associate runtime and link libraries... printf %s\n
checking for ar... ar
checking for archiver @FILE support... @
checking for strip... strip
checking for ranlib... ranlib
checking command to parse /usr/bin/nm -B output from gcc object... ok
checking for sysroot... no
checking for a working dd... /usr/bin/dd
checking how to truncate binary pipes... /usr/bin/dd bs=4096 count=1
checking for mt... no
checking if : is a manifest tool... no
checking for dlfcn.h... yes
checking for objdir... .libs
checking if gcc supports -fno-rtti -fno-exceptions... no
checking for gcc option to produce PIC... -fPIC -DPIC
checking if gcc PIC flag -fPIC -DPIC works... yes
checking if gcc static flag -static works... yes
checking if gcc supports -c -o file.o... yes
checking if gcc supports -c -o file.o... (cached) yes
checking whether the gcc linker (/usr/bin/ld) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking for fcntl.h... yes
checking for inttypes.h... (cached) yes
checking for limits.h... yes
checking for stddef.h... yes
checking for stdint.h... (cached) yes
checking for stdlib.h... (cached) yes
checking for string.h... (cached) yes
checking for unistd.h... (cached) yes
checking for int16_t... yes
checking for int32_t... yes
checking for int8_t... yes
checking for off_t... yes
checking for size_t... yes
checking for uint16_t... yes
checking for uint32_t... yes
checking for uint64_t... yes
checking for uint8_t... yes
checking for GNU libc compatible malloc... yes
checking for memset... yes
checking for regcomp... yes
checking for strcasecmp... yes
checking for strdup... yes
checking for strerror... yes
checking for strncasecmp... yes
checking for strndup... yes
checking for strstr... yes
checking target operating system... linux
checking for overridden pkgconfig directory path... no
checking for bzlib.h... yes
checking for BZ2_bzCompressInit in -lbz2... yes
checking for pthread.h... yes
checking for pthread_create in -lpthread... yes
enabled strict symbol encapsulation
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating Makefile
config.status: creating version.h
config.status: creating libjte-2.pc
config.status: executing depfiles commands
config.status: executing libtool commands
/usr/bin/make CC=aarch64-linux-gnu-gcc
make[1]: Entering directory '/<<PKGBUILDDIR>>'
aarch64-linux-gnu-gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -g -Wall -I libjte -pthread -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -Wdate-time -D_FORTIFY_SOURCE=2 -c -o jigdump.o jigdump.c
aarch64-linux-gnu-gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -g -Wall -I libjte -pthread -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -Wdate-time -D_FORTIFY_SOURCE=2 -c -o md5.o md5.c
aarch64-linux-gnu-gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -g -Wall -I libjte -pthread -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -Wdate-time -D_FORTIFY_SOURCE=2 -c -o jig-base64.o jig-base64.c
aarch64-linux-gnu-gcc -Wl,-z,relro -o jigdump jigdump.o md5.o jig-base64.o
aarch64-linux-gnu-gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -g -Wall -I libjte -pthread -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -Wdate-time -D_FORTIFY_SOURCE=2 -c -o mkimage.o mkimage.c
mkimage.c: In function ‘parse_template_file’:
mkimage.c:1004:5: warning: ignoring return value of ‘fread’ declared with attribute ‘warn_unused_result’ [-Wunused-result]
1004 | fread(buf, 6, 1, file);
| ^~~~~~~~~~~~~~~~~~~~~~
mkimage.c:1277:21: warning: pointer ‘file’ may be used after ‘fclose’ [-Wuse-after-free]
1277 | fclose(file);
| ^~~~~~~~~~~~
mkimage.c:1236:5: note: call to ‘fclose’ here
1236 | fclose(file);
| ^~~~~~~~~~~~
mkimage.c:1258:21: warning: pointer ‘file’ may be used after ‘fclose’ [-Wuse-after-free]
1258 | fclose(file);
| ^~~~~~~~~~~~
mkimage.c:1236:5: note: call to ‘fclose’ here
1236 | fclose(file);
| ^~~~~~~~~~~~
aarch64-linux-gnu-gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -g -Wall -I libjte -pthread -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -Wdate-time -D_FORTIFY_SOURCE=2 -c -o endian.o endian.c
make -C libjte
make[2]: Entering directory '/<<PKGBUILDDIR>>/libjte'
aarch64-linux-gnu-gcc -DPACKAGE_NAME=\"libjte\" -DPACKAGE_TARNAME=\"libjte\" -DPACKAGE_VERSION=\"2.0.0\" -DPACKAGE_STRING=\"libjte\ 2.0.0\" -DPACKAGE_BUGREPORT=\"https://www.einval.com/\~steve/software/JTE/\" -DPACKAGE_URL=\"\" -DPACKAGE=\"libjte\" -DVERSION=\"2.0.0\" -DHAVE_STDIO_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_STRINGS_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_UNISTD_H=1 -DSTDC_HEADERS=1 -DHAVE_FSEEKO=1 -DHAVE_DLFCN_H=1 -DLT_OBJDIR=\".libs/\" -DHAVE_FCNTL_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_LIMITS_H=1 -DHAVE_STDDEF_H=1 -DHAVE_STDINT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_UNISTD_H=1 -DHAVE_MALLOC=1 -DHAVE_MEMSET=1 -DHAVE_REGCOMP=1 -DHAVE_STRCASECMP=1 -DHAVE_STRDUP=1 -DHAVE_STRERROR=1 -DHAVE_STRNCASECMP=1 -DHAVE_STRNDUP=1 -DHAVE_STRSTR=1 -D_GNU_SOURCE=1 -DHAVE_LIBBZ2=1 -DHAVE_LIBPTHREAD=1 -I. -Ilibjte -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -std=c99 -g -pedantic -Wall -DDEBUG -c -o test/demo-demo.o `test -f 'test/demo.c' || echo './'`test/demo.c
/bin/bash ./libtool --silent --tag=CC --mode=compile aarch64-linux-gnu-gcc -DPACKAGE_NAME=\"libjte\" -DPACKAGE_TARNAME=\"libjte\" -DPACKAGE_VERSION=\"2.0.0\" -DPACKAGE_STRING=\"libjte\ 2.0.0\" -DPACKAGE_BUGREPORT=\"https://www.einval.com/\~steve/software/JTE/\" -DPACKAGE_URL=\"\" -DPACKAGE=\"libjte\" -DVERSION=\"2.0.0\" -DHAVE_STDIO_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_STRINGS_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_UNISTD_H=1 -DSTDC_HEADERS=1 -DHAVE_FSEEKO=1 -DHAVE_DLFCN_H=1 -DLT_OBJDIR=\".libs/\" -DHAVE_FCNTL_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_LIMITS_H=1 -DHAVE_STDDEF_H=1 -DHAVE_STDINT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_UNISTD_H=1 -DHAVE_MALLOC=1 -DHAVE_MEMSET=1 -DHAVE_REGCOMP=1 -DHAVE_STRCASECMP=1 -DHAVE_STRDUP=1 -DHAVE_STRERROR=1 -DHAVE_STRNCASECMP=1 -DHAVE_STRNDUP=1 -DHAVE_STRSTR=1 -D_GNU_SOURCE=1 -DHAVE_LIBBZ2=1 -DHAVE_LIBPTHREAD=1 -I. -Wdate-time -D_FORTIFY_SOURCE=2 -DLIBJTE_WITH_ZLIB -DLIBJTE_WITH_LIBBZ2 -DTHREADED_CHECKSUMS -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -std=c99 -g -pedantic -Wall -DDEBUG -c -o libjte_libjte_la-checksum.lo `test -f 'checksum.c' || echo './'`checksum.c
/bin/bash ./libtool --silent --tag=CC --mode=compile aarch64-linux-gnu-gcc -DPACKAGE_NAME=\"libjte\" -DPACKAGE_TARNAME=\"libjte\" -DPACKAGE_VERSION=\"2.0.0\" -DPACKAGE_STRING=\"libjte\ 2.0.0\" -DPACKAGE_BUGREPORT=\"https://www.einval.com/\~steve/software/JTE/\" -DPACKAGE_URL=\"\" -DPACKAGE=\"libjte\" -DVERSION=\"2.0.0\" -DHAVE_STDIO_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_STRINGS_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_UNISTD_H=1 -DSTDC_HEADERS=1 -DHAVE_FSEEKO=1 -DHAVE_DLFCN_H=1 -DLT_OBJDIR=\".libs/\" -DHAVE_FCNTL_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_LIMITS_H=1 -DHAVE_STDDEF_H=1 -DHAVE_STDINT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_UNISTD_H=1 -DHAVE_MALLOC=1 -DHAVE_MEMSET=1 -DHAVE_REGCOMP=1 -DHAVE_STRCASECMP=1 -DHAVE_STRDUP=1 -DHAVE_STRERROR=1 -DHAVE_STRNCASECMP=1 -DHAVE_STRNDUP=1 -DHAVE_STRSTR=1 -D_GNU_SOURCE=1 -DHAVE_LIBBZ2=1 -DHAVE_LIBPTHREAD=1 -I. -Wdate-time -D_FORTIFY_SOURCE=2 -DLIBJTE_WITH_ZLIB -DLIBJTE_WITH_LIBBZ2 -DTHREADED_CHECKSUMS -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -std=c99 -g -pedantic -Wall -DDEBUG -c -o libjte_libjte_la-endian.lo `test -f 'endian.c' || echo './'`endian.c
/bin/bash ./libtool --silent --tag=CC --mode=compile aarch64-linux-gnu-gcc -DPACKAGE_NAME=\"libjte\" -DPACKAGE_TARNAME=\"libjte\" -DPACKAGE_VERSION=\"2.0.0\" -DPACKAGE_STRING=\"libjte\ 2.0.0\" -DPACKAGE_BUGREPORT=\"https://www.einval.com/\~steve/software/JTE/\" -DPACKAGE_URL=\"\" -DPACKAGE=\"libjte\" -DVERSION=\"2.0.0\" -DHAVE_STDIO_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_STRINGS_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_UNISTD_H=1 -DSTDC_HEADERS=1 -DHAVE_FSEEKO=1 -DHAVE_DLFCN_H=1 -DLT_OBJDIR=\".libs/\" -DHAVE_FCNTL_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_LIMITS_H=1 -DHAVE_STDDEF_H=1 -DHAVE_STDINT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_UNISTD_H=1 -DHAVE_MALLOC=1 -DHAVE_MEMSET=1 -DHAVE_REGCOMP=1 -DHAVE_STRCASECMP=1 -DHAVE_STRDUP=1 -DHAVE_STRERROR=1 -DHAVE_STRNCASECMP=1 -DHAVE_STRNDUP=1 -DHAVE_STRSTR=1 -D_GNU_SOURCE=1 -DHAVE_LIBBZ2=1 -DHAVE_LIBPTHREAD=1 -I. -Wdate-time -D_FORTIFY_SOURCE=2 -DLIBJTE_WITH_ZLIB -DLIBJTE_WITH_LIBBZ2 -DTHREADED_CHECKSUMS -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -std=c99 -g -pedantic -Wall -DDEBUG -c -o libjte_libjte_la-jte.lo `test -f 'jte.c' || echo './'`jte.c
/bin/bash ./libtool --silent --tag=CC --mode=compile aarch64-linux-gnu-gcc -DPACKAGE_NAME=\"libjte\" -DPACKAGE_TARNAME=\"libjte\" -DPACKAGE_VERSION=\"2.0.0\" -DPACKAGE_STRING=\"libjte\ 2.0.0\" -DPACKAGE_BUGREPORT=\"https://www.einval.com/\~steve/software/JTE/\" -DPACKAGE_URL=\"\" -DPACKAGE=\"libjte\" -DVERSION=\"2.0.0\" -DHAVE_STDIO_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_STRINGS_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_UNISTD_H=1 -DSTDC_HEADERS=1 -DHAVE_FSEEKO=1 -DHAVE_DLFCN_H=1 -DLT_OBJDIR=\".libs/\" -DHAVE_FCNTL_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_LIMITS_H=1 -DHAVE_STDDEF_H=1 -DHAVE_STDINT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_UNISTD_H=1 -DHAVE_MALLOC=1 -DHAVE_MEMSET=1 -DHAVE_REGCOMP=1 -DHAVE_STRCASECMP=1 -DHAVE_STRDUP=1 -DHAVE_STRERROR=1 -DHAVE_STRNCASECMP=1 -DHAVE_STRNDUP=1 -DHAVE_STRSTR=1 -D_GNU_SOURCE=1 -DHAVE_LIBBZ2=1 -DHAVE_LIBPTHREAD=1 -I. -Wdate-time -D_FORTIFY_SOURCE=2 -DLIBJTE_WITH_ZLIB -DLIBJTE_WITH_LIBBZ2 -DTHREADED_CHECKSUMS -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -std=c99 -g -pedantic -Wall -DDEBUG -c -o libjte_libjte_la-libjte.lo `test -f 'libjte.c' || echo './'`libjte.c
/bin/bash ./libtool --silent --tag=CC --mode=compile aarch64-linux-gnu-gcc -DPACKAGE_NAME=\"libjte\" -DPACKAGE_TARNAME=\"libjte\" -DPACKAGE_VERSION=\"2.0.0\" -DPACKAGE_STRING=\"libjte\ 2.0.0\" -DPACKAGE_BUGREPORT=\"https://www.einval.com/\~steve/software/JTE/\" -DPACKAGE_URL=\"\" -DPACKAGE=\"libjte\" -DVERSION=\"2.0.0\" -DHAVE_STDIO_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_STRINGS_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_UNISTD_H=1 -DSTDC_HEADERS=1 -DHAVE_FSEEKO=1 -DHAVE_DLFCN_H=1 -DLT_OBJDIR=\".libs/\" -DHAVE_FCNTL_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_LIMITS_H=1 -DHAVE_STDDEF_H=1 -DHAVE_STDINT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_UNISTD_H=1 -DHAVE_MALLOC=1 -DHAVE_MEMSET=1 -DHAVE_REGCOMP=1 -DHAVE_STRCASECMP=1 -DHAVE_STRDUP=1 -DHAVE_STRERROR=1 -DHAVE_STRNCASECMP=1 -DHAVE_STRNDUP=1 -DHAVE_STRSTR=1 -D_GNU_SOURCE=1 -DHAVE_LIBBZ2=1 -DHAVE_LIBPTHREAD=1 -I. -Wdate-time -D_FORTIFY_SOURCE=2 -DLIBJTE_WITH_ZLIB -DLIBJTE_WITH_LIBBZ2 -DTHREADED_CHECKSUMS -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -std=c99 -g -pedantic -Wall -DDEBUG -c -o libjte_libjte_la-md5.lo `test -f 'md5.c' || echo './'`md5.c
/bin/bash ./libtool --silent --tag=CC --mode=compile aarch64-linux-gnu-gcc -DPACKAGE_NAME=\"libjte\" -DPACKAGE_TARNAME=\"libjte\" -DPACKAGE_VERSION=\"2.0.0\" -DPACKAGE_STRING=\"libjte\ 2.0.0\" -DPACKAGE_BUGREPORT=\"https://www.einval.com/\~steve/software/JTE/\" -DPACKAGE_URL=\"\" -DPACKAGE=\"libjte\" -DVERSION=\"2.0.0\" -DHAVE_STDIO_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_STRINGS_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_UNISTD_H=1 -DSTDC_HEADERS=1 -DHAVE_FSEEKO=1 -DHAVE_DLFCN_H=1 -DLT_OBJDIR=\".libs/\" -DHAVE_FCNTL_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_LIMITS_H=1 -DHAVE_STDDEF_H=1 -DHAVE_STDINT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_UNISTD_H=1 -DHAVE_MALLOC=1 -DHAVE_MEMSET=1 -DHAVE_REGCOMP=1 -DHAVE_STRCASECMP=1 -DHAVE_STRDUP=1 -DHAVE_STRERROR=1 -DHAVE_STRNCASECMP=1 -DHAVE_STRNDUP=1 -DHAVE_STRSTR=1 -D_GNU_SOURCE=1 -DHAVE_LIBBZ2=1 -DHAVE_LIBPTHREAD=1 -I. -Wdate-time -D_FORTIFY_SOURCE=2 -DLIBJTE_WITH_ZLIB -DLIBJTE_WITH_LIBBZ2 -DTHREADED_CHECKSUMS -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -std=c99 -g -pedantic -Wall -DDEBUG -c -o libjte_libjte_la-rsync.lo `test -f 'rsync.c' || echo './'`rsync.c
/bin/bash ./libtool --silent --tag=CC --mode=compile aarch64-linux-gnu-gcc -DPACKAGE_NAME=\"libjte\" -DPACKAGE_TARNAME=\"libjte\" -DPACKAGE_VERSION=\"2.0.0\" -DPACKAGE_STRING=\"libjte\ 2.0.0\" -DPACKAGE_BUGREPORT=\"https://www.einval.com/\~steve/software/JTE/\" -DPACKAGE_URL=\"\" -DPACKAGE=\"libjte\" -DVERSION=\"2.0.0\" -DHAVE_STDIO_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_STRINGS_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_UNISTD_H=1 -DSTDC_HEADERS=1 -DHAVE_FSEEKO=1 -DHAVE_DLFCN_H=1 -DLT_OBJDIR=\".libs/\" -DHAVE_FCNTL_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_LIMITS_H=1 -DHAVE_STDDEF_H=1 -DHAVE_STDINT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_UNISTD_H=1 -DHAVE_MALLOC=1 -DHAVE_MEMSET=1 -DHAVE_REGCOMP=1 -DHAVE_STRCASECMP=1 -DHAVE_STRDUP=1 -DHAVE_STRERROR=1 -DHAVE_STRNCASECMP=1 -DHAVE_STRNDUP=1 -DHAVE_STRSTR=1 -D_GNU_SOURCE=1 -DHAVE_LIBBZ2=1 -DHAVE_LIBPTHREAD=1 -I. -Wdate-time -D_FORTIFY_SOURCE=2 -DLIBJTE_WITH_ZLIB -DLIBJTE_WITH_LIBBZ2 -DTHREADED_CHECKSUMS -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -std=c99 -g -pedantic -Wall -DDEBUG -c -o libjte_libjte_la-sha1.lo `test -f 'sha1.c' || echo './'`sha1.c
/bin/bash ./libtool --silent --tag=CC --mode=compile aarch64-linux-gnu-gcc -DPACKAGE_NAME=\"libjte\" -DPACKAGE_TARNAME=\"libjte\" -DPACKAGE_VERSION=\"2.0.0\" -DPACKAGE_STRING=\"libjte\ 2.0.0\" -DPACKAGE_BUGREPORT=\"https://www.einval.com/\~steve/software/JTE/\" -DPACKAGE_URL=\"\" -DPACKAGE=\"libjte\" -DVERSION=\"2.0.0\" -DHAVE_STDIO_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_STRINGS_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_UNISTD_H=1 -DSTDC_HEADERS=1 -DHAVE_FSEEKO=1 -DHAVE_DLFCN_H=1 -DLT_OBJDIR=\".libs/\" -DHAVE_FCNTL_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_LIMITS_H=1 -DHAVE_STDDEF_H=1 -DHAVE_STDINT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_UNISTD_H=1 -DHAVE_MALLOC=1 -DHAVE_MEMSET=1 -DHAVE_REGCOMP=1 -DHAVE_STRCASECMP=1 -DHAVE_STRDUP=1 -DHAVE_STRERROR=1 -DHAVE_STRNCASECMP=1 -DHAVE_STRNDUP=1 -DHAVE_STRSTR=1 -D_GNU_SOURCE=1 -DHAVE_LIBBZ2=1 -DHAVE_LIBPTHREAD=1 -I. -Wdate-time -D_FORTIFY_SOURCE=2 -DLIBJTE_WITH_ZLIB -DLIBJTE_WITH_LIBBZ2 -DTHREADED_CHECKSUMS -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -std=c99 -g -pedantic -Wall -DDEBUG -c -o libjte_libjte_la-sha256.lo `test -f 'sha256.c' || echo './'`sha256.c
/bin/bash ./libtool --silent --tag=CC --mode=compile aarch64-linux-gnu-gcc -DPACKAGE_NAME=\"libjte\" -DPACKAGE_TARNAME=\"libjte\" -DPACKAGE_VERSION=\"2.0.0\" -DPACKAGE_STRING=\"libjte\ 2.0.0\" -DPACKAGE_BUGREPORT=\"https://www.einval.com/\~steve/software/JTE/\" -DPACKAGE_URL=\"\" -DPACKAGE=\"libjte\" -DVERSION=\"2.0.0\" -DHAVE_STDIO_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_STRINGS_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_UNISTD_H=1 -DSTDC_HEADERS=1 -DHAVE_FSEEKO=1 -DHAVE_DLFCN_H=1 -DLT_OBJDIR=\".libs/\" -DHAVE_FCNTL_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_LIMITS_H=1 -DHAVE_STDDEF_H=1 -DHAVE_STDINT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_UNISTD_H=1 -DHAVE_MALLOC=1 -DHAVE_MEMSET=1 -DHAVE_REGCOMP=1 -DHAVE_STRCASECMP=1 -DHAVE_STRDUP=1 -DHAVE_STRERROR=1 -DHAVE_STRNCASECMP=1 -DHAVE_STRNDUP=1 -DHAVE_STRSTR=1 -D_GNU_SOURCE=1 -DHAVE_LIBBZ2=1 -DHAVE_LIBPTHREAD=1 -I. -Wdate-time -D_FORTIFY_SOURCE=2 -DLIBJTE_WITH_ZLIB -DLIBJTE_WITH_LIBBZ2 -DTHREADED_CHECKSUMS -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -std=c99 -g -pedantic -Wall -DDEBUG -c -o libjte_libjte_la-sha512.lo `test -f 'sha512.c' || echo './'`sha512.c
/bin/bash ./libtool --silent --tag=CC --mode=link aarch64-linux-gnu-gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -std=c99 -g -pedantic -Wall -DDEBUG -Wl,-z,relro -Wl,--version-script=libjte.ver -o test/demo test/demo-demo.o libjte_libjte_la-checksum.lo libjte_libjte_la-endian.lo libjte_libjte_la-jte.lo libjte_libjte_la-libjte.lo libjte_libjte_la-md5.lo libjte_libjte_la-rsync.lo libjte_libjte_la-sha1.lo libjte_libjte_la-sha256.lo libjte_libjte_la-sha512.lo -lz -lpthread -lbz2
/bin/bash ./libtool --silent --tag=CC --mode=link aarch64-linux-gnu-gcc -DLIBJTE_WITH_ZLIB -DLIBJTE_WITH_LIBBZ2 -DTHREADED_CHECKSUMS -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -std=c99 -g -pedantic -Wall -DDEBUG -version-info 2:0:0 -Wl,-z,relro -Wl,--version-script=libjte.ver -o libjte/libjte.la -rpath /usr/lib/aarch64-linux-gnu libjte_libjte_la-checksum.lo libjte_libjte_la-endian.lo libjte_libjte_la-jte.lo libjte_libjte_la-libjte.lo libjte_libjte_la-md5.lo libjte_libjte_la-rsync.lo libjte_libjte_la-sha1.lo libjte_libjte_la-sha256.lo libjte_libjte_la-sha512.lo -lz -lpthread -lbz2
make[2]: Leaving directory '/<<PKGBUILDDIR>>/libjte'
aarch64-linux-gnu-gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -g -Wall -I libjte -pthread -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -Wdate-time -D_FORTIFY_SOURCE=2 -c -o uncompress.o uncompress.c
uncompress.c: In function ‘read_data_block’:
uncompress.c:109:9: warning: ignoring return value of ‘fread’ declared with attribute ‘warn_unused_result’ [-Wunused-result]
109 | fread(inbuf, sizeof(inbuf), 1, template_file);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
uncompress.c:130:5: warning: ignoring return value of ‘fread’ declared with attribute ‘warn_unused_result’ [-Wunused-result]
130 | fread(inbuf, 16, 1, template_file);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
aarch64-linux-gnu-gcc -Wl,-z,relro -o jigit-mkimage mkimage.o endian.o md5.o libjte/libjte_libjte_la-sha256.o uncompress.o jig-base64.o -lz -lbz2
aarch64-linux-gnu-gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -g -Wall -I libjte -pthread -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -Wdate-time -D_FORTIFY_SOURCE=2 -c -o jigsum.o jigsum.c
aarch64-linux-gnu-gcc -Wl,-z,relro -o jigsum jigsum.o md5.o jig-base64.o
aarch64-linux-gnu-gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -g -Wall -I libjte -pthread -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -Wdate-time -D_FORTIFY_SOURCE=2 -c -o jigsum-sha256.o jigsum-sha256.c
aarch64-linux-gnu-gcc -Wl,-z,relro -o jigsum-sha256 jigsum-sha256.o libjte/libjte_libjte_la-sha256.o jig-base64.o
aarch64-linux-gnu-gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -g -Wall -I libjte -pthread -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -Wdate-time -D_FORTIFY_SOURCE=2 -c -o rsync.o rsync.c
aarch64-linux-gnu-gcc -Wl,-z,relro -o rsyncsum rsync.o md5.o jig-base64.o
aarch64-linux-gnu-gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -g -Wall -I libjte -pthread -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -Wdate-time -D_FORTIFY_SOURCE=2 -c -o extract-data.o extract-data.c
aarch64-linux-gnu-gcc -Wl,-z,relro -o extract-data extract-data.o endian.o uncompress.o -lz -lbz2
aarch64-linux-gnu-gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -g -Wall -I libjte -pthread -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -Wdate-time -D_FORTIFY_SOURCE=2 -c -o parallel-sums.o parallel-sums.c
aarch64-linux-gnu-gcc -pthread -Wl,-z,relro -o parallel-sums parallel-sums.o libjte/libjte_libjte_la-checksum.o libjte/libjte_libjte_la-md5.o libjte/libjte_libjte_la-sha1.o libjte/libjte_libjte_la-sha256.o libjte/libjte_libjte_la-sha512.o -lpthread
make[1]: Leaving directory '/<<PKGBUILDDIR>>'
touch build-stamp
dh_testdir
dh_testroot
dh_prep
dh_installdirs
dh_installdirs -plibjte-dev /usr/lib/aarch64-linux-gnu/pkgconfig
# Add here commands to install the package into debian/<packagename>
#/usr/bin/make prefix=`pwd`/debian/`dh_listpackages`/usr install
dh_install -pjigit jigit-mkimage jigdump usr/bin
dh_install -pjigit jigsum jigsum-sha256 parallel-sums usr/bin
dh_install -pjigit libjte/bin/jigdo-gen-checksum-list usr/bin
dh_install -pjigit mkjigsnap usr/sbin
dh_install -pjigit *.1 usr/share/man/man1
dh_install -pjigit mkjigsnap.8 usr/share/man/man8
dh_install -plibjte2 libjte/libjte/.libs/libjte.so.2.0.0 usr/lib/aarch64-linux-gnu
dh_install -plibjte2 libjte/libjte/.libs/libjte.so.2 usr/lib/aarch64-linux-gnu
dh_install -plibjte-dev libjte/libjte/.libs/libjte.a usr/lib/aarch64-linux-gnu
dh_install -plibjte-dev libjte/libjte/.libs/libjte.so usr/lib/aarch64-linux-gnu
dh_install -plibjte-dev libjte/libjte.h usr/include/libjte
dh_install -plibjte-dev libjte/libjte-2.pc usr/lib/aarch64-linux-gnu/pkgconfig
dh_testdir
dh_testroot
dh_installchangelogs
dh_installdocs
dh_installexamples
dh_installman
dh_makeshlibs
dh_link
dh_strip
dh_compress
dh_fixperms
dh_installdeb
dh_shlibdeps
dpkg-shlibdeps: warning: diversions involved - output may be incorrect
diversion by libc6 from: /lib/ld-linux-aarch64.so.1
dpkg-shlibdeps: warning: diversions involved - output may be incorrect
diversion by libc6 to: /lib/ld-linux-aarch64.so.1.usr-is-merged
dpkg-shlibdeps: warning: diversions involved - output may be incorrect
diversion by libc6 from: /lib/ld-linux-aarch64.so.1
dpkg-shlibdeps: warning: diversions involved - output may be incorrect
diversion by libc6 to: /lib/ld-linux-aarch64.so.1.usr-is-merged
dh_gencontrol
dpkg-gencontrol: warning: Depends field of package libjte-dev: substitution variable ${shlibs:Depends} used, but is not defined
dh_md5sums
dh_builddeb
dpkg-deb: building package 'jigit' in '../jigit_1.22-4_arm64.deb'.
dpkg-deb: building package 'jigit-dbgsym' in '../jigit-dbgsym_1.22-4_arm64.deb'.
dpkg-deb: building package 'libjte2' in '../libjte2_1.22-4_arm64.deb'.
dpkg-deb: building package 'libjte2-dbgsym' in '../libjte2-dbgsym_1.22-4_arm64.deb'.
dpkg-deb: building package 'libjte-dev' in '../libjte-dev_1.22-4_arm64.deb'.
dpkg-genbuildinfo --build=binary -O../jigit_1.22-4_arm64.buildinfo
dpkg-genchanges --build=binary -O../jigit_1.22-4_arm64.changes
dpkg-genchanges: info: binary-only upload (no source code included)
dpkg-source --after-build .
dpkg-buildpackage: info: binary-only upload (no source included)
--------------------------------------------------------------------------------
Build finished at 2024-11-16T19:58:45Z
Finished
--------
I: Built successfully
+------------------------------------------------------------------------------+
| Changes |
+------------------------------------------------------------------------------+
jigit_1.22-4_arm64.changes:
---------------------------
Format: 1.8
Date: Thu, 03 Aug 2023 22:10:39 +0100
Source: jigit
Binary: jigit jigit-dbgsym libjte-dev libjte2 libjte2-dbgsym
Architecture: arm64
Version: 1.22-4
Distribution: sid
Urgency: medium
Maintainer: Steve McIntyre <93sam@debian.org>
Changed-By: Steve McIntyre <93sam@debian.org>
Description:
jigit - tools for working with jigdo files
libjte-dev - Jigdo Template Export - development
libjte2 - Jigdo Template Export - runtime library
Closes: 836791 1041753
Changes:
jigit (1.22-4) unstable; urgency=medium
.
* Don't ship empty directory /usr/lib/pkgconfig. Closes: #1041753
* Fix cross-building. Closes: #836791. Thanks to Helmut Grohne for
the patch.
+ Let dh_auto_configure pass relevant cross flags
+ Pass triplet-prefixed CC to make
Checksums-Sha1:
8fa4940b5d808958c694300099d87198ac932a6f 111148 jigit-dbgsym_1.22-4_arm64.deb
5d87965ba3318464c94dd33d7812fc1d248a25c9 5656 jigit_1.22-4_arm64.buildinfo
42ec448ec4637f2738cfaa424843e240b6719e2d 49452 jigit_1.22-4_arm64.deb
0978b98cc417f5fdafacd6122e82e08a5d111bcd 34948 libjte-dev_1.22-4_arm64.deb
67d282cf768b15ec7a47537b34c90fcc085d0906 62776 libjte2-dbgsym_1.22-4_arm64.deb
f942e8457ced67cf34cb289fdc588d1110402412 27728 libjte2_1.22-4_arm64.deb
Checksums-Sha256:
65e8b115d1e4c6c6b6c6d11359715517f5e041ba2aee7aff8ed6977288b7c2b4 111148 jigit-dbgsym_1.22-4_arm64.deb
c1c2d37d52f156f256c461f91837afd35dd39fe9db18a0580f30ceeb848c8beb 5656 jigit_1.22-4_arm64.buildinfo
670342e7171d7cf14e9640368f749faf29a0f8978682496a061f7ea920cf13e2 49452 jigit_1.22-4_arm64.deb
93a1a3bb71db962c09a6e09175eb1e615e5c820e33859802cd8140aa3b410049 34948 libjte-dev_1.22-4_arm64.deb
c91f185a5dfcdf059ec88e32fa7178dde2bb76c25b0cdcff5bfb68f2f85e92b0 62776 libjte2-dbgsym_1.22-4_arm64.deb
b2f045c4feae5d7a9db5472bc96d2b31a46c50400feca74d8120c1af90ac81ef 27728 libjte2_1.22-4_arm64.deb
Files:
ef117e3a0def097e39ff36eef1765260 111148 debug optional jigit-dbgsym_1.22-4_arm64.deb
fc7aa4bc07508734e866c76b9842950e 5656 utils optional jigit_1.22-4_arm64.buildinfo
050b93a4a23210e0ce3f60797c99ca40 49452 utils optional jigit_1.22-4_arm64.deb
73211135144d13d8849c623fd37da4e4 34948 libdevel optional libjte-dev_1.22-4_arm64.deb
f996e2f6c23983e7f64e5cb4c64bb3ca 62776 debug optional libjte2-dbgsym_1.22-4_arm64.deb
8bd5ea5043080b542ac9a96fe20d9b97 27728 libs optional libjte2_1.22-4_arm64.deb
+------------------------------------------------------------------------------+
| Buildinfo |
+------------------------------------------------------------------------------+
Format: 1.0
Source: jigit
Binary: jigit jigit-dbgsym libjte-dev libjte2 libjte2-dbgsym
Architecture: arm64
Version: 1.22-4
Checksums-Md5:
ef117e3a0def097e39ff36eef1765260 111148 jigit-dbgsym_1.22-4_arm64.deb
050b93a4a23210e0ce3f60797c99ca40 49452 jigit_1.22-4_arm64.deb
73211135144d13d8849c623fd37da4e4 34948 libjte-dev_1.22-4_arm64.deb
f996e2f6c23983e7f64e5cb4c64bb3ca 62776 libjte2-dbgsym_1.22-4_arm64.deb
8bd5ea5043080b542ac9a96fe20d9b97 27728 libjte2_1.22-4_arm64.deb
Checksums-Sha1:
8fa4940b5d808958c694300099d87198ac932a6f 111148 jigit-dbgsym_1.22-4_arm64.deb
42ec448ec4637f2738cfaa424843e240b6719e2d 49452 jigit_1.22-4_arm64.deb
0978b98cc417f5fdafacd6122e82e08a5d111bcd 34948 libjte-dev_1.22-4_arm64.deb
67d282cf768b15ec7a47537b34c90fcc085d0906 62776 libjte2-dbgsym_1.22-4_arm64.deb
f942e8457ced67cf34cb289fdc588d1110402412 27728 libjte2_1.22-4_arm64.deb
Checksums-Sha256:
65e8b115d1e4c6c6b6c6d11359715517f5e041ba2aee7aff8ed6977288b7c2b4 111148 jigit-dbgsym_1.22-4_arm64.deb
670342e7171d7cf14e9640368f749faf29a0f8978682496a061f7ea920cf13e2 49452 jigit_1.22-4_arm64.deb
93a1a3bb71db962c09a6e09175eb1e615e5c820e33859802cd8140aa3b410049 34948 libjte-dev_1.22-4_arm64.deb
c91f185a5dfcdf059ec88e32fa7178dde2bb76c25b0cdcff5bfb68f2f85e92b0 62776 libjte2-dbgsym_1.22-4_arm64.deb
b2f045c4feae5d7a9db5472bc96d2b31a46c50400feca74d8120c1af90ac81ef 27728 libjte2_1.22-4_arm64.deb
Build-Origin: Debian
Build-Architecture: arm64
Build-Date: Sat, 16 Nov 2024 19:58:45 +0000
Build-Path: /<<PKGBUILDDIR>>
Build-Tainted-By:
merged-usr-via-aliased-dirs
Installed-Build-Depends:
autoconf (= 2.72-3),
automake (= 1:1.16.5-1.3),
autopoint (= 0.22.5-2),
autotools-dev (= 20220109.1),
base-files (= 13.5),
base-passwd (= 3.6.5),
bash (= 5.2.32-1+b2),
binutils (= 2.43.1-5),
binutils-aarch64-linux-gnu (= 2.43.1-5),
binutils-common (= 2.43.1-5),
bsdextrautils (= 2.40.2-11),
bsdutils (= 1:2.40.2-11),
build-essential (= 12.12),
bzip2 (= 1.0.8-6),
coreutils (= 9.5-1+b1),
cpp (= 4:14.2.0-1),
cpp-14 (= 14.2.0-8),
cpp-14-aarch64-linux-gnu (= 14.2.0-8),
cpp-aarch64-linux-gnu (= 4:14.2.0-1),
dash (= 0.5.12-9+b1),
debconf (= 1.5.87),
debhelper (= 13.20),
debianutils (= 5.21),
dh-autoreconf (= 20),
dh-strip-nondeterminism (= 1.14.0-1),
diffutils (= 1:3.10-1+b1),
dpkg (= 1.22.12~1.gbp82cafd),
dpkg-dev (= 1.22.12~1.gbp82cafd),
dwz (= 0.15-1+b1),
file (= 1:5.45-3+b1),
findutils (= 4.10.0-3),
g++ (= 4:14.2.0-1),
g++-14 (= 14.2.0-8),
g++-14-aarch64-linux-gnu (= 14.2.0-8),
g++-aarch64-linux-gnu (= 4:14.2.0-1),
gcc (= 4:14.2.0-1),
gcc-14 (= 14.2.0-8),
gcc-14-aarch64-linux-gnu (= 14.2.0-8),
gcc-14-base (= 14.2.0-8),
gcc-aarch64-linux-gnu (= 4:14.2.0-1),
gettext (= 0.22.5-2),
gettext-base (= 0.22.5-2),
grep (= 3.11-4+b1),
groff-base (= 1.23.0-5),
gzip (= 1.12-1.1+b1),
hostname (= 3.25),
init-system-helpers (= 1.67),
intltool-debian (= 0.35.0+20060710.6),
libacl1 (= 2.3.2-2+b1),
libarchive-zip-perl (= 1.68-1),
libasan8 (= 14.2.0-8),
libatomic1 (= 14.2.0-8),
libattr1 (= 1:2.5.2-2),
libaudit-common (= 1:4.0.2-2),
libaudit1 (= 1:4.0.2-2),
libbinutils (= 2.43.1-5),
libblkid1 (= 2.40.2-11),
libbz2-1.0 (= 1.0.8-6),
libbz2-dev (= 1.0.8-6),
libc-bin (= 2.40-3),
libc-dev-bin (= 2.40-3),
libc6 (= 2.40-3),
libc6-dev (= 2.40-3),
libcap-ng0 (= 0.8.5-3+b1),
libcap2 (= 1:2.66-5+b1),
libcc1-0 (= 14.2.0-8),
libcrypt-dev (= 1:4.4.36-5),
libcrypt1 (= 1:4.4.36-5),
libctf-nobfd0 (= 2.43.1-5),
libctf0 (= 2.43.1-5),
libdb5.3t64 (= 5.3.28+dfsg2-9),
libdebconfclient0 (= 0.273),
libdebhelper-perl (= 13.20),
libdpkg-perl (= 1.22.12~1.gbp82cafd),
libelf1t64 (= 0.192-4),
libfile-stripnondeterminism-perl (= 1.14.0-1),
libgcc-14-dev (= 14.2.0-8),
libgcc-s1 (= 14.2.0-8),
libgdbm-compat4t64 (= 1.24-2),
libgdbm6t64 (= 1.24-2),
libgmp10 (= 2:6.3.0+dfsg-2+b2),
libgomp1 (= 14.2.0-8),
libgprofng0 (= 2.43.1-5),
libhwasan0 (= 14.2.0-8),
libicu72 (= 72.1-5+b1),
libisl23 (= 0.27-1),
libitm1 (= 14.2.0-8),
libjansson4 (= 2.14-2+b3),
liblsan0 (= 14.2.0-8),
liblzma5 (= 5.6.3-1+b1),
libmagic-mgc (= 1:5.45-3+b1),
libmagic1t64 (= 1:5.45-3+b1),
libmd0 (= 1.1.0-2+b1),
libmount1 (= 2.40.2-11),
libmpc3 (= 1.3.1-1+b3),
libmpfr6 (= 4.2.1-1+b2),
libpam-modules (= 1.5.3-7+b1),
libpam-modules-bin (= 1.5.3-7+b1),
libpam-runtime (= 1.5.3-7),
libpam0g (= 1.5.3-7+b1),
libpcre2-8-0 (= 10.44-4),
libperl5.40 (= 5.40.0-7),
libpipeline1 (= 1.5.8-1),
libseccomp2 (= 2.5.5-1+b3),
libselinux1 (= 3.7-3+b1),
libsframe1 (= 2.43.1-5),
libsmartcols1 (= 2.40.2-11),
libssl3t64 (= 3.3.2-2),
libstdc++-14-dev (= 14.2.0-8),
libstdc++6 (= 14.2.0-8),
libsystemd0 (= 257~rc2-3),
libtinfo6 (= 6.5-2+b1),
libtool (= 2.4.7-8),
libtsan2 (= 14.2.0-8),
libubsan1 (= 14.2.0-8),
libuchardet0 (= 0.0.8-1+b2),
libudev1 (= 257~rc2-3),
libunistring5 (= 1.2-1+b1),
libuuid1 (= 2.40.2-11),
libxml2 (= 2.12.7+dfsg+really2.9.14-0.2+b1),
libzstd1 (= 1.5.6+dfsg-1+b1),
linux-libc-dev (= 6.11.7-1),
m4 (= 1.4.19-4),
make (= 4.3-4.1+b1),
man-db (= 2.13.0-1),
mawk (= 1.3.4.20240905-1),
ncurses-base (= 6.5-2),
ncurses-bin (= 6.5-2+b1),
openssl-provider-legacy (= 3.3.2-2),
patch (= 2.7.6-7+b1),
perl (= 5.40.0-7),
perl-base (= 5.40.0-7),
perl-modules-5.40 (= 5.40.0-7),
po-debconf (= 1.0.21+nmu1),
rpcsvc-proto (= 1.4.3-1+b1),
sed (= 4.9-2+b1),
sensible-utils (= 0.0.24),
sysvinit-utils (= 3.11-1),
tar (= 1.35+dfsg-3+b1),
util-linux (= 2.40.2-11),
xz-utils (= 5.6.3-1+b1),
zlib1g (= 1:1.3.dfsg+really1.3.1-1+b1),
zlib1g-dev (= 1:1.3.dfsg+really1.3.1-1+b1)
Environment:
DEB_BUILD_OPTIONS="parallel=16"
LANG="en_US.UTF-8"
LC_ALL="C.UTF-8"
SOURCE_DATE_EPOCH="1691097039"
+------------------------------------------------------------------------------+
| Package contents |
+------------------------------------------------------------------------------+
jigit-dbgsym_1.22-4_arm64.deb
-----------------------------
new Debian package, version 2.0.
size 111148 bytes: control archive=724 bytes.
485 bytes, 12 lines control
530 bytes, 5 lines md5sums
Package: jigit-dbgsym
Source: jigit
Version: 1.22-4
Auto-Built-Package: debug-symbols
Architecture: arm64
Maintainer: Steve McIntyre <93sam@debian.org>
Installed-Size: 163
Depends: jigit (= 1.22-4)
Section: debug
Priority: optional
Description: debug symbols for jigit
Build-Ids: 15103c58efe63463d502007181cc62303eb35a8c 282aad0b128c84f53bd0475af36f54d2e178f6f3 332b52dbc0c8486c513682ee675238cb1e3ff6ee b9c989ea324a6f6ff48b36557e71c5d71d39c54d c0902eadf4f45bc36bc122c4890a18b4d0b753ec
drwxr-xr-x root/root 0 2023-08-03 21:10 ./
drwxr-xr-x root/root 0 2023-08-03 21:10 ./usr/
drwxr-xr-x root/root 0 2023-08-03 21:10 ./usr/lib/
drwxr-xr-x root/root 0 2023-08-03 21:10 ./usr/lib/debug/
drwxr-xr-x root/root 0 2023-08-03 21:10 ./usr/lib/debug/.build-id/
drwxr-xr-x root/root 0 2023-08-03 21:10 ./usr/lib/debug/.build-id/15/
-rw-r--r-- root/root 18640 2023-08-03 21:10 ./usr/lib/debug/.build-id/15/103c58efe63463d502007181cc62303eb35a8c.debug
drwxr-xr-x root/root 0 2023-08-03 21:10 ./usr/lib/debug/.build-id/28/
-rw-r--r-- root/root 22032 2023-08-03 21:10 ./usr/lib/debug/.build-id/28/2aad0b128c84f53bd0475af36f54d2e178f6f3.debug
drwxr-xr-x root/root 0 2023-08-03 21:10 ./usr/lib/debug/.build-id/33/
-rw-r--r-- root/root 39904 2023-08-03 21:10 ./usr/lib/debug/.build-id/33/2b52dbc0c8486c513682ee675238cb1e3ff6ee.debug
drwxr-xr-x root/root 0 2023-08-03 21:10 ./usr/lib/debug/.build-id/b9/
-rw-r--r-- root/root 50872 2023-08-03 21:10 ./usr/lib/debug/.build-id/b9/c989ea324a6f6ff48b36557e71c5d71d39c54d.debug
drwxr-xr-x root/root 0 2023-08-03 21:10 ./usr/lib/debug/.build-id/c0/
-rw-r--r-- root/root 18944 2023-08-03 21:10 ./usr/lib/debug/.build-id/c0/902eadf4f45bc36bc122c4890a18b4d0b753ec.debug
drwxr-xr-x root/root 0 2023-08-03 21:10 ./usr/share/
drwxr-xr-x root/root 0 2023-08-03 21:10 ./usr/share/doc/
lrwxrwxrwx root/root 0 2023-08-03 21:10 ./usr/share/doc/jigit-dbgsym -> jigit
jigit_1.22-4_arm64.deb
----------------------
new Debian package, version 2.0.
size 49452 bytes: control archive=1200 bytes.
788 bytes, 19 lines control
1070 bytes, 17 lines md5sums
Package: jigit
Version: 1.22-4
Architecture: arm64
Maintainer: Steve McIntyre <93sam@debian.org>
Installed-Size: 387
Depends: libbz2-1.0, libc6 (>= 2.34), zlib1g (>= 1:1.2.3.3), libio-compress-perl
Recommends: wget
Section: utils
Priority: optional
Homepage: https://www.einval.com/~steve/software/JTE/
Description: tools for working with jigdo files
Utilities written to make jigdo files easier to work with.
.
jigit-mkimage: program to create images from jigdo files
jigdump: list the contents of a template file
jigsum: Output MD5 sums in the base64-style jigdo way
jigsum-sha256: Output SHA256 sums in the base64-style jigdo way
mkjigsnap: helper script to be run on the upstream server
parallel-sums: program to generate multiple checksums in parallel
drwxr-xr-x root/root 0 2023-08-03 21:10 ./
drwxr-xr-x root/root 0 2023-08-03 21:10 ./usr/
drwxr-xr-x root/root 0 2023-08-03 21:10 ./usr/bin/
-rwxr-xr-x root/root 6329 2019-11-21 18:46 ./usr/bin/jigdo-gen-checksum-list
-rwxr-xr-x root/root 67832 2023-08-03 21:10 ./usr/bin/jigdump
-rwxr-xr-x root/root 68056 2023-08-03 21:10 ./usr/bin/jigit-mkimage
-rwxr-xr-x root/root 67856 2023-08-03 21:10 ./usr/bin/jigsum
-rwxr-xr-x root/root 67856 2023-08-03 21:10 ./usr/bin/jigsum-sha256
-rwxr-xr-x root/root 68064 2023-08-03 21:10 ./usr/bin/parallel-sums
drwxr-xr-x root/root 0 2023-08-03 21:10 ./usr/sbin/
-rwxr-xr-x root/root 17378 2019-11-21 18:46 ./usr/sbin/mkjigsnap
drwxr-xr-x root/root 0 2023-08-03 21:10 ./usr/share/
drwxr-xr-x root/root 0 2023-08-03 21:10 ./usr/share/doc/
drwxr-xr-x root/root 0 2023-08-03 21:10 ./usr/share/doc/jigit/
-rw-r--r-- root/root 843 2023-08-03 21:10 ./usr/share/doc/jigit/changelog.Debian.gz
-rw-r--r-- root/root 2221 2019-11-21 18:46 ./usr/share/doc/jigit/changelog.gz
-rw-r--r-- root/root 1270 2023-08-03 21:10 ./usr/share/doc/jigit/copyright
drwxr-xr-x root/root 0 2023-08-03 21:10 ./usr/share/doc/jigit/examples/
drwxr-xr-x root/root 0 2023-08-03 21:10 ./usr/share/man/
drwxr-xr-x root/root 0 2023-08-03 21:10 ./usr/share/man/man1/
-rw-r--r-- root/root 429 2023-08-03 21:10 ./usr/share/man/man1/jigdump.1.gz
-rw-r--r-- root/root 2348 2023-08-03 21:10 ./usr/share/man/man1/jigit-mkimage.1.gz
-rw-r--r-- root/root 807 2023-08-03 21:10 ./usr/share/man/man1/jigit.1.gz
-rw-r--r-- root/root 669 2023-08-03 21:10 ./usr/share/man/man1/jigsum-sha256.1.gz
-rw-r--r-- root/root 641 2023-08-03 21:10 ./usr/share/man/man1/jigsum.1.gz
-rw-r--r-- root/root 861 2023-08-03 21:10 ./usr/share/man/man1/parallel-sums.1.gz
drwxr-xr-x root/root 0 2023-08-03 21:10 ./usr/share/man/man8/
-rw-r--r-- root/root 1871 2023-08-03 21:10 ./usr/share/man/man8/mkjigsnap.8.gz
libjte-dev_1.22-4_arm64.deb
---------------------------
new Debian package, version 2.0.
size 34948 bytes: control archive=852 bytes.
565 bytes, 16 lines control
433 bytes, 6 lines md5sums
Package: libjte-dev
Source: jigit
Version: 1.22-4
Architecture: arm64
Maintainer: Steve McIntyre <93sam@debian.org>
Installed-Size: 128
Depends: zlib1g-dev, libbz2-dev, libjte2 (= 1.22-4)
Section: libdevel
Priority: optional
Homepage: https://www.einval.com/~steve/software/JTE/
Description: Jigdo Template Export - development
libjte is a library providing support for creating jigdo files, to be
used by ISO image creation tools such as xorriso.
.
This package provides the header and development files needed to build
programs and packages that use libjte.
drwxr-xr-x root/root 0 2023-08-03 21:10 ./
drwxr-xr-x root/root 0 2023-08-03 21:10 ./usr/
drwxr-xr-x root/root 0 2023-08-03 21:10 ./usr/include/
drwxr-xr-x root/root 0 2023-08-03 21:10 ./usr/include/libjte/
-rw-r--r-- root/root 23734 2019-11-21 18:46 ./usr/include/libjte/libjte.h
drwxr-xr-x root/root 0 2023-08-03 21:10 ./usr/lib/
drwxr-xr-x root/root 0 2023-08-03 21:10 ./usr/lib/aarch64-linux-gnu/
-rw-r--r-- root/root 86894 2023-08-03 21:10 ./usr/lib/aarch64-linux-gnu/libjte.a
lrwxrwxrwx root/root 0 2023-08-03 21:10 ./usr/lib/aarch64-linux-gnu/libjte.so -> libjte.so.2.0.0
drwxr-xr-x root/root 0 2023-08-03 21:10 ./usr/lib/aarch64-linux-gnu/pkgconfig/
-rw-r--r-- root/root 243 2023-08-03 21:10 ./usr/lib/aarch64-linux-gnu/pkgconfig/libjte-2.pc
drwxr-xr-x root/root 0 2023-08-03 21:10 ./usr/share/
drwxr-xr-x root/root 0 2023-08-03 21:10 ./usr/share/doc/
drwxr-xr-x root/root 0 2023-08-03 21:10 ./usr/share/doc/libjte-dev/
-rw-r--r-- root/root 847 2023-08-03 21:10 ./usr/share/doc/libjte-dev/changelog.Debian.gz
-rw-r--r-- root/root 2221 2019-11-21 18:46 ./usr/share/doc/libjte-dev/changelog.gz
-rw-r--r-- root/root 1270 2023-08-03 21:10 ./usr/share/doc/libjte-dev/copyright
libjte2-dbgsym_1.22-4_arm64.deb
-------------------------------
new Debian package, version 2.0.
size 62776 bytes: control archive=532 bytes.
343 bytes, 13 lines control
106 bytes, 1 lines md5sums
Package: libjte2-dbgsym
Source: jigit
Version: 1.22-4
Auto-Built-Package: debug-symbols
Architecture: arm64
Maintainer: Steve McIntyre <93sam@debian.org>
Installed-Size: 81
Depends: libjte2 (= 1.22-4)
Section: debug
Priority: optional
Multi-Arch: same
Description: debug symbols for libjte2
Build-Ids: e1a84cc08da8fe2f907f124fed685a7b3c0bdcf8
drwxr-xr-x root/root 0 2023-08-03 21:10 ./
drwxr-xr-x root/root 0 2023-08-03 21:10 ./usr/
drwxr-xr-x root/root 0 2023-08-03 21:10 ./usr/lib/
drwxr-xr-x root/root 0 2023-08-03 21:10 ./usr/lib/debug/
drwxr-xr-x root/root 0 2023-08-03 21:10 ./usr/lib/debug/.build-id/
drwxr-xr-x root/root 0 2023-08-03 21:10 ./usr/lib/debug/.build-id/e1/
-rw-r--r-- root/root 72112 2023-08-03 21:10 ./usr/lib/debug/.build-id/e1/a84cc08da8fe2f907f124fed685a7b3c0bdcf8.debug
drwxr-xr-x root/root 0 2023-08-03 21:10 ./usr/share/
drwxr-xr-x root/root 0 2023-08-03 21:10 ./usr/share/doc/
lrwxrwxrwx root/root 0 2023-08-03 21:10 ./usr/share/doc/libjte2-dbgsym -> libjte2
libjte2_1.22-4_arm64.deb
------------------------
new Debian package, version 2.0.
size 27728 bytes: control archive=884 bytes.
565 bytes, 17 lines control
287 bytes, 4 lines md5sums
17 bytes, 1 lines shlibs
66 bytes, 2 lines triggers
Package: libjte2
Source: jigit
Version: 1.22-4
Architecture: arm64
Maintainer: Steve McIntyre <93sam@debian.org>
Installed-Size: 84
Depends: libbz2-1.0, libc6 (>= 2.34), zlib1g (>= 1:1.1.4)
Section: libs
Priority: optional
Multi-Arch: same
Homepage: https://www.einval.com/~steve/software/JTE/
Description: Jigdo Template Export - runtime library
libjte is a library providing support for creating jigdo files, to be
used by ISO image creation tools such as xorriso.
.
This package provides the runtime library file needed to run software
written using libjte
drwxr-xr-x root/root 0 2023-08-03 21:10 ./
drwxr-xr-x root/root 0 2023-08-03 21:10 ./usr/
drwxr-xr-x root/root 0 2023-08-03 21:10 ./usr/lib/
drwxr-xr-x root/root 0 2023-08-03 21:10 ./usr/lib/aarch64-linux-gnu/
lrwxrwxrwx root/root 0 2023-08-03 21:10 ./usr/lib/aarch64-linux-gnu/libjte.so.2 -> libjte.so.2.0.0
-rw-r--r-- root/root 68104 2023-08-03 21:10 ./usr/lib/aarch64-linux-gnu/libjte.so.2.0.0
drwxr-xr-x root/root 0 2023-08-03 21:10 ./usr/share/
drwxr-xr-x root/root 0 2023-08-03 21:10 ./usr/share/doc/
drwxr-xr-x root/root 0 2023-08-03 21:10 ./usr/share/doc/libjte2/
-rw-r--r-- root/root 844 2023-08-03 21:10 ./usr/share/doc/libjte2/changelog.Debian.gz
-rw-r--r-- root/root 2221 2019-11-21 18:46 ./usr/share/doc/libjte2/changelog.gz
-rw-r--r-- root/root 1270 2023-08-03 21:10 ./usr/share/doc/libjte2/copyright
lintian
-------
Setup apt archive
-----------------
Merged Build-Depends: lintian
Filtered Build-Depends: lintian
dpkg-deb: warning: root directory has unusual owner or group 998:999.
Hint: either pass --root-owner-group, see dpkg-build-api(7) or add an explicit 'Rules-Requires-Root: no' in debian/control.
dpkg-deb: warning: ignoring 1 warning about the control file(s)
dpkg-deb: building package 'sbuild-build-depends-lintian-dummy' in '/<<RESOLVERDIR>>/apt_archive/sbuild-build-depends-lintian-dummy.deb'.
Ign:1 copy:/<<RESOLVERDIR>>/apt_archive ./ InRelease
Get:2 copy:/<<RESOLVERDIR>>/apt_archive ./ Release [615 B]
Ign:3 copy:/<<RESOLVERDIR>>/apt_archive ./ Release.gpg
Get:4 copy:/<<RESOLVERDIR>>/apt_archive ./ Sources [1217 B]
Get:5 copy:/<<RESOLVERDIR>>/apt_archive ./ Packages [1279 B]
Fetched 3111 B in 0s (278 kB/s)
Reading package lists...
Get:1 file:/<<BUILDDIR>>/resolver-Jj370o/apt_archive ./ InRelease
Ign:1 file:/<<BUILDDIR>>/resolver-Jj370o/apt_archive ./ InRelease
Get:2 file:/<<BUILDDIR>>/resolver-Jj370o/apt_archive ./ Release [606 B]
Get:2 file:/<<BUILDDIR>>/resolver-Jj370o/apt_archive ./ Release [606 B]
Get:3 file:/<<BUILDDIR>>/resolver-Jj370o/apt_archive ./ Release.gpg
Ign:3 file:/<<BUILDDIR>>/resolver-Jj370o/apt_archive ./ Release.gpg
Reading package lists...
Reading package lists...
Install lintian build dependencies (apt-based resolver)
-------------------------------------------------------
Installing build dependencies
Reading package lists...
Building dependency tree...
Reading state information...
The following NEW packages will be installed:
sbuild-build-depends-lintian-dummy
0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded.
Need to get 848 B of archives.
After this operation, 0 B of additional disk space will be used.
Get:1 copy:/<<RESOLVERDIR>>/apt_archive ./ sbuild-build-depends-lintian-dummy 0.invalid.0 [848 B]
debconf: delaying package configuration, since apt-utils is not installed
Fetched 848 B in 0s (0 B/s)
Selecting previously unselected package sbuild-build-depends-lintian-dummy.
(Reading database ... 22580 files and directories currently installed.)
Preparing to unpack .../sbuild-build-depends-lintian-dummy_0.invalid.0_arm64.deb ...
Unpacking sbuild-build-depends-lintian-dummy (0.invalid.0) ...
Setting up sbuild-build-depends-lintian-dummy (0.invalid.0) ...
Running lintian...
W: jigit changes: distribution-and-changes-mismatch sid unstable
W: jigit: groff-message troff:<standard input>:10: error: a space character is not allowed in an escape sequence parameter [usr/share/man/man8/mkjigsnap.8.gz:3]
W: jigit: groff-message troff:<standard input>:11: error: a space character is not allowed in an escape sequence parameter [usr/share/man/man8/mkjigsnap.8.gz:4]
W: jigit: groff-message troff:<standard input>:12: error: a space character is not allowed in an escape sequence parameter [usr/share/man/man8/mkjigsnap.8.gz:5]
W: jigit: groff-message troff:<standard input>:13: error: a space character is not allowed in an escape sequence parameter [usr/share/man/man8/mkjigsnap.8.gz:6]
W: jigit: groff-message troff:<standard input>:14: error: a space character is not allowed in an escape sequence parameter [usr/share/man/man8/mkjigsnap.8.gz:7]
W: jigit: groff-message troff:<standard input>:19: error: a space character is not allowed in an escape sequence parameter [usr/share/man/man8/mkjigsnap.8.gz:8]
W: jigit: groff-message troff:<standard input>:20: error: a space character is not allowed in an escape sequence parameter [usr/share/man/man8/mkjigsnap.8.gz:9]
W: jigit: groff-message troff:<standard input>:21: error: a space character is not allowed in an escape sequence parameter [usr/share/man/man8/mkjigsnap.8.gz:10]
W: jigit: groff-message troff:<standard input>:22: error: a space character is not allowed in an escape sequence parameter [usr/share/man/man8/mkjigsnap.8.gz:11]
W: jigit: groff-message troff:<standard input>:23: error: a space character is not allowed in an escape sequence parameter [usr/share/man/man8/mkjigsnap.8.gz:12]
W: jigit: groff-message troff:<standard input>:24: error: a space character is not allowed in an escape sequence parameter [usr/share/man/man8/mkjigsnap.8.gz:13]
W: jigit: groff-message troff:<standard input>:8: error: a space character is not allowed in an escape sequence parameter [usr/share/man/man8/mkjigsnap.8.gz:1]
W: jigit: groff-message troff:<standard input>:9: error: a space character is not allowed in an escape sequence parameter [usr/share/man/man8/mkjigsnap.8.gz:2]
W: jigit: no-manual-page [usr/bin/jigdo-gen-checksum-list]
I: Lintian run was successful.
+------------------------------------------------------------------------------+
| Post Build |
+------------------------------------------------------------------------------+
+------------------------------------------------------------------------------+
| Cleanup |
+------------------------------------------------------------------------------+
Purging /<<BUILDDIR>>
Not cleaning session: cloned chroot in use
+------------------------------------------------------------------------------+
| Summary |
+------------------------------------------------------------------------------+
Build Architecture: arm64
Build Type: binary
Build-Space: 8672
Build-Time: 33
Distribution: sid
Host Architecture: arm64
Install-Time: 17
Job: /tmp/debusine-fetch-exec-upload-8ison3xc/jigit_1.22-4.dsc
Lintian: warn
Machine Architecture: arm64
Package: jigit
Package-Time: 86
Source-Version: 1.22-4
Space: 8672
Status: successful
Version: 1.22-4
--------------------------------------------------------------------------------
Finished at 2024-11-16T19:58:45Z
Build needed 00:01:26, 8672k disk space