deb_control_files:
- control
- md5sums
deb_fields:
Architecture: amd64
Depends: libc6 (>= 2.34)
Description: |-
change the idle3 timer of recent Western Digital Hard Disk Drives
Idle3-tools provides a linux/unix utility that can disable, get and
set the value of the infamous idle3 timer found on recent Western
Digital Hard Disk Drives.
.
It can be used as an alternative to the official wdidle3.exe
proprietary utility, without the need to reboot in a DOS environment.
.
A power off/on cycle of the drive will still be mandatory for new
settings to be taken into account.
.
Modern Western Digital "Green" Drives include the Intellipark feature
that stops the disk when not in use.
.
Unfortunately, the default timer setting is not perfect on linux/unix
systems, including many NAS, and leads to a dramatic increase of the
Load Cycle Count value (SMART attribute #193). With the default timer
setting, the drive will spin down *every eight seconds* if idle and
this may get the spindle motor to burn out in a few months or so.
.
If you have a Western Digital EADS or EARS drive, please check you
SMART information before it's too late by running the following
command:
.
sudo smartctl -A /dev/sda | grep "^193"
.
If the Load cycle count (which is in the last column) exceeds 1000,
you're probably affected by the idle3 timer problem.
Homepage: http://idle3-tools.sourceforge.net/
Installed-Size: '40'
Maintainer: Debian QA Group <packages@qa.debian.org>
Package: idle3-tools
Priority: optional
Section: admin
Version: 0.9.1-7
srcpkg_name: idle3-tools
srcpkg_version: 0.9.1-7